configs: lx2160aqds: enable DM support for pcf2127 rtc
PATCH v3 1/2 configs: lx2160aqds: enable DM support for pcf2127 rtc
Enable related configs on all lx2160aqds boards to support pcf2127 rtc DM function.
---
depends on:
- https://patchwork.ozlabs.org/project/uboot/list/?series=117203
- https://patchwork.ozlabs.org/project/uboot/list/?series=114242
Changes in v3:
- Add configuration options for i2c dm to set default bus number Settings.
Changes in v2:
- Add dependency patch links.
configs/lx2160aqds_tfa_SECURE_BOOT_defconfig | 9 +++++++++ configs/lx2160aqds_tfa_defconfig | 9 +++++++++ 2 files changed, 18 insertions(+), 0 deletions(-)
configs/lx2160aqds_tfa_SECURE_BOOT_defconfig +9 -0
@@ -61,3 +61,12 @@ CONFIG_RSA=y CONFIG_SPL_RSA=y CONFIG_RSA_SOFTWARE_EXP=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_DM_I2C=y +CONFIG_I2C_SET_DEFAULT_BUS_NUM=y +CONFIG_I2C_DEFAULT_BUS_NUMBER=0 +CONFIG_DM_RTC=y +CONFIG_DM_GPIO=y +CONFIG_CMD_DATE=y +CONFIG_RTC_PCF2127=y +CONFIG_I2C_MUX=y +CONFIG_I2C_MUX_PCA954x=y
configs/lx2160aqds_tfa_defconfig +9 -0
@@ -57,3 +57,12 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_DM_I2C=y +CONFIG_I2C_SET_DEFAULT_BUS_NUM=y +CONFIG_I2C_DEFAULT_BUS_NUMBER=0 +CONFIG_DM_RTC=y +CONFIG_DM_GPIO=y +CONFIG_CMD_DATE=y +CONFIG_RTC_PCF2127=y +CONFIG_I2C_MUX=y +CONFIG_I2C_MUX_PCA954x=y
Signature · 1 line
1.7.1
PATCH v3 2/2 armv8: lx2160aqds : Add pcf2127 node
This patch adds the pcf2127-rtc node under the i2c0->i2c-mux at 77->i2c at 3 for lx2160aqds boards.
---
depends on:
- https://patchwork.ozlabs.org/project/uboot/list/?series=117203
- https://patchwork.ozlabs.org/project/uboot/list/?series=114242
Changes in v3:
- No change.
Changes in v2:
- Add dependency patch links.
arch/arm/dts/fsl-lx2160a-qds.dts | 23 +++++++++++++++++++++++ 1 files changed, 23 insertions(+), 0 deletions(-)
arch/arm/dts/fsl-lx2160a-qds.dts +23 -0
@@ -23,6 +23,29 @@ status = "okay"; }; +&i2c0 { + status = "okay"; + u-boot,dm-pre-reloc; + + i2c-mux at 77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c at 3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + rtc at 51 { + compatible = "pcf2127-rtc"; + reg = <0x51>; + }; + }; + }; +}; + &sata0 { status = "okay"; };
Signature · 1 line
1.7.1
PATCH v3 2/2 armv8: lx2160aqds : Add pcf2127 node
Quoted 10 lines
-----Original Message-----
From: Chuanhua Han <[email protected]>
Sent: Wednesday, July 10, 2019 6:35 PM
To: Pankaj Bansal <[email protected]>; albert.u.boot at aribaud.net; Udit Agarwal <[email protected]>; Prabhakar Kushwaha <[email protected]>
Cc: u-boot at lists.denx.de; Chuanhua Han <[email protected]>
Subject: [PATCH v3 2/2] armv8: lx2160aqds : Add pcf2127 node
Quoted 5 lines
This patch adds the pcf2127-rtc node under the i2c0->i2c-mux at 77->i2c at 3 for lx2160aqds boards.
Signed-off-by Chuanhua Han <[email protected]>---
This patch has been applied to fsl-qoriq master, awaiting upstream.
--pk