Skip to contentSkip to conversation

configs/beaglebone: increase rootfs image size

PATCH New Pierre-Jean Texier 2 participants 3 messages Jul 9, 2019 – Jul 10, 2019

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 configs/beaglebone: increase rootfs image size

The default rootfs image size is too small (60M).
So, increase it to 120M.

Fixes:

Copying files into the device: __populate_fs: Could not allocate block in ext2 filesystem while writing file "koi8_r.py" mkfs.ext4: Could not allocate block in ext2 filesystem while populating file system
*** Maybe you need to increase the filesystem size (BR2_TARGET_ROOTFS_EXT2_SIZE)

---
 configs/beaglebone_defconfig | 1 +
 1 file changed, 1 insertion(+)
configs/beaglebone_defconfig +1 -0
index b4f152f..0ba3310 100644
@@ -13,6 +13,7 @@ BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="am335x-evm am335x-bone am335x-boneblack am335x-bonegreen am335x-evmsk"
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
Signature · 1 line
2.7.4
#1 lore raw

PATCH 1/1 configs/beaglebone: increase rootfs image size

Hello Pierre-Jean,

Quoted 19 lines · Pierre-Jean Texier

The default rootfs image size is too small (60M).
So, increase it to 120M.

Fixes:

Copying files into the device: __populate_fs: Could not allocate block in ext2 filesystem while writing file "koi8_r.py" mkfs.ext4: Could not allocate block in ext2 filesystem while populating file system
*** Maybe you need to increase the filesystem size (BR2_TARGET_ROOTFS_EXT2_SIZE)

---
 configs/beaglebone_defconfig | 1 +
 1 file changed, 1 insertion(+)
configs/beaglebone_defconfig +0 -0
index b4f152f..0ba3310 100644

configs/beaglebone_defconfig BR2_LINUX_KERNEL_DTS_SUPPORT=y · line 16

Quoted 4 lines
configs/beaglebone_defconfig +1 -0
@@ -13,6 +13,7 @@ BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="am335x-evm am335x-bone am335x-boneblack am335x-bonegreen am335x-evmsk"
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="120M"

Tested with buildroot master, no change:

	$ make O=$PWD -C ../buildroot_git beaglebone_defconfig
	$ make
	$ mount -t ext4 -o loop images/rootfs.ext4 /mnt/
	$ df /mnt/
Filesystem     1K-blocks  Used Available Use% Mounted on
/dev/loop0         55397 15029     36068  30% /mnt
	$ umount /mnt

Still plenty of space available....

	$ find . -name koi8_r.py

No koi8_r.py found, you enabled some additional options?

Regards,
Peter

Quoted 3 lines
configs/beaglebone_defconfig +0 -0
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
#2 lore raw

PATCH 1/1 configs/beaglebone: increase rootfs image size

Hi Peter,

Le 10/07/2019 ? 17:38, Peter Seiderer a ?crit?:

Quoted 11 lines

Tested with buildroot master, no change:

	$ make O=$PWD -C ../buildroot_git beaglebone_defconfig
	$ make
	$ mount -t ext4 -o loop images/rootfs.ext4/mnt/
	$ df/mnt/
Filesystem     1K-blocks  Used Available Use% Mounted on
/dev/loop0         55397 15029     36068  30% /mnt
	$ umount /mnt
Quoted 5 lines

Still plenty of space available....

	$ find . -name koi8_r.py

No koi8_r.py found, you enabled some additional options?

My bad, you are right, my workspace was not
totally clean ...

I will update the status to "Not Applicable".

Thanks for testing.

Regards,
Pierre-Jean

Quoted 3 lines

Regards,
Peter

Signature · 3 lines
Pierre-Jean Texier
Embedded Linux Engineer
https://koncepto.io