ASoC: rt1011: Add R0 temperature and TDM1 ADC2DAT Swap control
Subsystems (3)
PATCH 2/2 ASoC: rt1011: Add R0 temperature and TDM1 ADC2DAT Swap control
From: Shuming Fan <[email protected]>
- The user level application could set the R0 temperature after booting system. The degree Celsius of R0 temperature store in the non-volatile space when doing R0 calibration.
- TDM1 ADC2DAT Swap controls use to control TDM slot2/3 data
Signed-off-by Shuming Fan <[email protected]>
--- sound/soc/codecs/rt1011.c | 9 ++++++++- sound/soc/codecs/rt1011.h | 1 + 2 files changed, 9 insertions(+), 1 deletion(-)
sound/soc/codecs/rt1011.c +8 -1
@@ -1029,6 +1029,8 @@ static const char * const rt1011_tdm_adc_swap_select[] = { static SOC_ENUM_SINGLE_DECL(rt1011_tdm_adc1_1_enum, RT1011_TDM1_SET_3, 6, rt1011_tdm_adc_swap_select); +static SOC_ENUM_SINGLE_DECL(rt1011_tdm_adc2_1_enum, RT1011_TDM1_SET_3, 4, + rt1011_tdm_adc_swap_select);static void rt1011_reset (struct regmap *regmap) {
@@ -1333,7 +1335,8 @@ static const struct snd_kcontrol_new rt1011_snd_controls[] = {/* TDM1 Data Out Selection */ SOC_ENUM ("TDM1 DOUT Source" , rt1011_tdm1_adc1_dat_enum),SOC_ENUM ("TDM1 DOUT Location" , rt1011_tdm1_adc1_loc_enum), -SOC_ENUM ("TDM1 ADCDAT Swap Select" , rt1011_tdm_adc1_1_enum), +SOC_ENUM ("TDM1 ADC1DAT Swap Select" , rt1011_tdm_adc1_1_enum), +SOC_ENUM ("TDM1 ADC2DAT Swap Select" , rt1011_tdm_adc2_1_enum),/* Data Out Mode */ SOC_ENUM("I2S ADC DOUT Mode", rt1011_adc_dout_mode_enum),
@@ -1355,6 +1358,10 @@ static const struct snd_kcontrol_new rt1011_snd_controls[] = {SOC_SINGLE_EXT ("R0 Calibration" ,SND_SOC_NOPM ,0 ,1 ,0 , rt1011_r0_cali_get, rt1011_r0_cali_put),RT1011_R0_LOAD ("R0 Load Mode" ), + +/* R0 temperature */ +SOC_SINGLE ("R0 Temperature" ,RT1011_STP_INITIAL_RESISTANCE_TEMP , + 2, 255, 0), }; static int rt1011_is_sys_clk_from_pll(struct snd_soc_dapm_widget *source,
sound/soc/codecs/rt1011.h +1 -0
@@ -227,6 +227,7 @@#define RT1011_STP_CALIB_RS_TEMP 0x152a#define RT1011_INIT_RECIPROCAL_REG_24_16 0x1538#define RT1011_INIT_RECIPROCAL_REG_15_0 0x1539 +#define RT1011_STP_INITIAL_RESISTANCE_TEMP 0x153c#define RT1011_STP_ALPHA_RECIPROCAL_MSB 0x153e#define RT1011_SPK_RESISTANCE_1 0x1544#define RT1011_SPK_RESISTANCE_2 0x1546
Signature · 1 line
2.22.0