tpm: wait for valid status
PATCH 1/1 tpm: wait for valid status
The TPM specification says that the EXPECT_DATA bit is not valid until the VALID bit is set. Wait for that bit to be set. Fixes problems with Ifineon SPI TPM.
Signed-off-by Roman Kapl <[email protected]>
--- drivers/tpm/tpm2_tis_spi.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)
drivers/tpm/tpm2_tis_spi.c +10 -2
@@ -295,6 +295,14 @@ static int tpm_tis_spi_wait_for_stat(struct udevice *dev, u8 mask,return -ETIMEDOUT ; } +static u8 tpm_tis_spi_valid_status (struct udevice *dev,u8 *status) +{ +struct tpm_chip *chip =dev_get_priv (dev); + +return tpm_tis_spi_wait_for_stat (dev,TPM_STS_VALID , + chip->timeout_c, status); +} +static int tpm_tis_spi_get_burstcount (struct udevice *dev) {struct tpm_chip *chip =dev_get_priv (dev);
@@ -455,7 +463,7 @@ static int tpm_tis_spi_send(struct udevice *dev, const u8 *buf, size_t len) i += size; } - ret =tpm_tis_spi_status (dev, &status); + ret =tpm_tis_spi_valid_status (dev, &status);if (ret) goto out_err;
@@ -469,7 +477,7 @@ static int tpm_tis_spi_send(struct udevice *dev, const u8 *buf, size_t len)if (ret) goto out_err; - ret =tpm_tis_spi_status (dev, &status); + ret =tpm_tis_spi_valid_status (dev, &status);if (ret) goto out_err;
Signature · 1 line
2.20.1.390.gb5101f9297
PATCH 1/1 tpm: wait for valid status
Quoted 5 lines · Roman Kapl
The TPM specification says that the
EXPECT_DATAbit is not valid until the VALID bit is set. Wait for that bit to be set. Fixes problems with Ifineon SPI TPM.Signed-off-by Roman Kapl <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190711/0171978d/attachment.sig>