Skip to contentSkip to conversation

PATCH New Samuel Jiang 1 participant 7 messages Jul 12, 2019 Device tree bindings

lore
Share & tools
lore
#0 lore raw

this patch setup minmial setting for match upstream kernel

From: Samuel Jiang <[email protected]>
Date: Mon, 24 Jun 2019 18:16:18 +0800
Subject: [PATCH dev-5.2 v2 1/7] ARM: dts: nuvoton: Add Nuvoton RunBMC
DeviceTree

Initial Nuvoton RunBMC Module which use NPCM750 SoC.

Including features:
1. memoory
2. serial port
3. watchdog

---
 arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts | 52 ++++++++++++++++++++
 1 file changed, 52 insertions(+)
 create mode 100644 arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts
arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts new file +52 -0
new file mode 100644
index 000000000000..831a73e5a88e
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2019 Nuvoton Technology [email protected]
+// Copyright (c) 2019 Quanta Computer Inc. [email protected]
+
+/dts-v1/;
+#include "nuvoton-npcm750.dtsi"
+
+/ {
+	model = "Nuvoton npcm750 RunBMC Module";
+	compatible = "nuvoton,npcm750";
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+	};
+
+	chosen {
+		stdout-path = &serial3;
+	};
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+
+		apb {
+
+			watchdog1: watchdog@901C {
+				status = "okay";
+			};
+
+			serial0: serial@1000 {
+				status = "okay";
+			};
+
+			serial1: serial@2000 {
+				status = "okay";
+			};
+
+			serial2: serial@3000 {
+				status = "okay";
+			};
+
+			serial3: serial@4000 {
+				status = "okay";
+			};
+		};
+	};
+};

--
2.20.1

#1 lore raw

this patch match v1-1/6 patch. and the v2 add iio-hwmon

From: Samuel Jiang <[email protected]>
Date: Fri, 12 Jul 2019 10:19:20 +0800
Subject: [PATCH dev-5.2 v2 2/7] ARM: dts: nuvoton: runbmc-nuvoton: add hwmon
and ahb features

add hwmon, mux-controller and ahb features like:
1. ethernet
2. usb
3. udc
4. partition
5. lpc
6. kcs

---
 arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts | 248 +++++++++++++++++++
 1 file changed, 248 insertions(+)
arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts +248 -0
index 831a73e5a88e..dc34f53af0b7 100644
@@ -10,10 +10,27 @@
 	compatible = "nuvoton,npcm750";
 
 	aliases {
+		ethernet0 = &emc0;
+		ethernet1 = &gmac0;
 		serial0 = &serial0;
 		serial1 = &serial1;
 		serial2 = &serial2;
 		serial3 = &serial3;
+		udc0 = &udc0;
+		udc1 = &udc1;
+		udc2 = &udc2;
+		udc3 = &udc3;
+		udc4 = &udc4;
+		udc5 = &udc5;
+		udc6 = &udc6;
+		udc7 = &udc7;
+		udc8 = &udc8;
+		udc9 = &udc9;
+		emmc0 = &sdhci0;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		fiu0 = &fiu0;
+		fiu1 = &fiu3;
 	};
 
 	chosen {
@@ -24,14 +41,197 @@
 		reg = <0 0x40000000>;
 	};
 
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
+	};
+
+
 	ahb {
 
+		gmac0: eth@f0802000 {
+			phy-mode = "rgmii-id";
+			snps,eee-force-disable;
+			status = "okay";
+		};
+
+		emc0: eth@f0825000 {
+			phy-mode = "rmii";
+			use-ncsi;
+			status = "okay";
+		};
+
+		ehci1: usb@f0806000 {
+			status = "okay";
+		};
+
+		ohci1: ohci@f0807000 {
+			status = "okay";
+		};
+
+		udc0:udc@f0830000 {
+			status = "okay";
+		};
+
+		udc1:udc@f0831000 {
+			status = "okay";
+		};
+
+		udc2:udc@f0832000 {
+			status = "okay";
+		};
+
+		udc3:udc@f0833000 {
+			status = "okay";
+		};
+
+		udc4:udc@f0834000 {
+			status = "okay";
+		};
+
+		udc5:udc@f0835000 {
+			status = "okay";
+		};
+
+		udc6:udc@f0836000 {
+			status = "okay";
+		};
+
+		udc7:udc@f0837000 {
+			status = "okay";
+		};
+
+		udc8:udc@f0838000 {
+			status = "okay";
+		};
+
+		udc9:udc@f0839000 {
+			status = "okay";
+		};
+
+		aes:aes@f0858000 {
+			status = "okay";
+		};
+
+		sha:sha@f085a000 {
+			status = "okay";
+		};
+
+		fiu0: fiu@fb000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0cs1_pins>;
+			status = "okay";
+			spi-nor@0 {
+				compatible = "jedec,spi-nor";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				spi-rx-bus-width = <2>;
+				partitions@80000000 {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					bmc@0{
+						label = "bmc";
+						reg = <0x000000 0x2000000>;
+					};
+					u-boot@0 {
+						label = "u-boot";
+						read-only;
+						reg = <0x0000000 0x80000>;
+					};
+					u-boot-env@100000 {
+						label = "u-boot-env";
+						reg = <0x00100000 0x40000>;
+					};
+					kernel@200000 {
+						label = "kernel";
+						reg = <0x0200000 0x600000>;
+					};
+					rofs@800000 {
+						label = "rofs";
+						reg = <0x0800000 0x1500000>;
+					};
+					rwfs@1d00000 {
+						label = "rwfs";
+						reg = <0x1d00000 0x300000>;
+					};
+				};
+			};
+			spi-nor@1 {
+				compatible = "jedec,spi-nor";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <1>;
+				npcm,fiu-rx-bus-width = <2>;
+				partitions@88000000 {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					spare1@0 {
+						label = "spi0-cs1-spare1";
+						reg = <0x0 0x800000>;
+					};
+					spare2@800000 {
+						label = "spi0-cs1-spare2";
+						reg = <0x800000 0x0>;
+					};
+				};
+			};
+		};
+
+		fiu3: fiu@c0000000 {
+			pinctrl-0 = <&spi3_pins>;
+			status = "okay";
+			spi-nor@0 {
+				compatible = "jedec,spi-nor";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				spi-rx-bus-width = <2>;
+				partitions@A0000000 {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					system1@0 {
+						label = "spi3-system1";
+						reg = <0x0 0x800000>;
+					};
+					system2@800000 {
+						label = "spi3-system2";
+						reg = <0x800000 0x0>;
+					};
+				};
+			};
+		};
+
+		sdhci0: sdhci@f0842000 {
+			status = "okay";
+		};
+
+		pcimbox: pcimbox@f0848000 {
+			status = "okay";
+		};
+
+		vcd: vcd@f0810000 {
+			status = "okay";
+		};
+
+		ece: ece@f0820000 {
+			status = "okay";
+		};
+
 		apb {
 
 			watchdog1: watchdog@901C {
 				status = "okay";
 			};
 
+			rng: rng@b000 {
+				status = "okay";
+			};
+
 			serial0: serial@1000 {
 				status = "okay";
 			};
@@ -47,6 +247,54 @@
 			serial3: serial@4000 {
 				status = "okay";
 			};
+
+			adc: adc@c000 {
+				status = "okay";
+			};
+
+			otp:otp@189000 {
+				status = "okay";
+			};
+
+			lpc_kcs: lpc_kcs@7000 {
+				kcs1: kcs1@0 {
+					status = "okay";
+				};
+
+				kcs2: kcs2@0 {
+					status = "okay";
+				};
+
+				kcs3: kcs3@0 {
+					status = "okay";
+				};
+			};
+
+			lpc_host: lpc_host@7000 {
+				lpc_bpc: lpc_bpc@40 {
+					monitor-ports = <0x80>;
+					status = "okay";
+				};
+			};
+
+			spi0: spi@200000 {
+				cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+				status = "okay";
+			};
+
+			spi1: spi@201000 {
+				status = "okay";
+			};
 		};
 	};
 };
+
+&gcr {
+	serial_port_mux: mux-controller {
+	compatible = "mmio-mux";
+	#mux-control-cells = <1>;
+
+	mux-reg-masks = <0x38 0x07>;
+	idle-states = <6>;
+	};
+};
Signature · 1 line
2.20.1
#2 lore raw
In reply to Samuel Jiang

this

From: Samuel Jiang <[email protected]>
Date: Mon, 24 Jun 2019 19:03:27 +0800
Subject: [PATCH dev-5.2 v2 3/7] ARM: dts: nuvoton: nuvoton-npcm750-runbmc: add
fan, peci, led

Update nuvoton-npcm750-runbmc dts fan, led groups and enable peci

---
 arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts | 78 ++++++++++++++++++++
 1 file changed, 78 insertions(+)
arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts +78 -0
index dc34f53af0b7..90210217d54c 100644
@@ -277,6 +277,70 @@
 				};
 			};
 
+			pwm_fan:pwm-fan-controller@103000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <   &pwm0_pins &pwm1_pins
+						&fanin0_pins &fanin1_pins
+						&fanin2_pins &fanin3_pins
+						&fanin4_pins &fanin5_pins
+						&fanin6_pins &fanin7_pins
+						&fanin8_pins &fanin9_pins
+						&fanin10_pins &fanin11_pins>;
+				status = "okay";
+				fan@0 {
+					reg = <0x00>;
+					fan-tach-ch = /bits/ 8 <0x00 0x01>;
+					cooling-levels = <127 255>;
+				};
+				fan@1 {
+					reg = <0x01>;
+					fan-tach-ch = /bits/ 8 <0x02 0x03>;
+					cooling-levels = /bits/ 8 <127 255>;
+				};
+				fan@2 {
+					reg = <0x02>;
+					fan-tach-ch = /bits/ 8 <0x04 0x05>;
+					cooling-levels = /bits/ 8 <127 255>;
+				};
+				fan@3 {
+					reg = <0x03>;
+					fan-tach-ch = /bits/ 8 <0x06 0x07>;
+					cooling-levels = /bits/ 8 <127 255>;
+				};
+				fan@4 {
+					reg = <0x04>;
+					fan-tach-ch = /bits/ 8 <0x08 0x09>;
+					cooling-levels = /bits/ 8 <127 255>;
+				};
+				fan@5 {
+					reg = <0x05>;
+					fan-tach-ch = /bits/ 8 <0x0A 0x0B>;
+					cooling-levels = /bits/ 8 <127 255>;
+				};
+				fan@6 {
+					reg = <0x06>;
+					fan-tach-ch = /bits/ 8 <0x0C 0x0D>;
+					cooling-levels = /bits/ 8 <127 255>;
+				};
+				fan@7 {
+					reg = <0x07>;
+					fan-tach-ch = /bits/ 8 <0x0E 0x0F>;
+					cooling-levels = /bits/ 8 <127 255>;
+				};
+			};
+
+			peci: peci-bus@100000 {
+				cmd-timeout-ms = <1000>;
+				pull-down = <0>;
+				host-neg-bit-rate = <15>;
+				status = "okay";
+				intel-peci-dimmtemp@30 {
+					compatible = "intel,peci-client";
+					reg = <0x30>;
+					status = "okay";
+				};
+			};
+
 			spi0: spi@200000 {
 				cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
 				status = "okay";
@@ -287,6 +351,20 @@
 			};
 		};
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		heartbeat {
+			label = "heartbeat";
+			gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		identify {
+			label = "identify";
+			gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
 };
 
 &gcr {
Signature · 1 line
2.20.1
#3 lore raw

PATCH v2 4/7 ARM: dts: nuvoton: nuvoton-npcm750-runbmc: Add i2c nodes

In reply to Samuel Jiang

From: Samuel Jiang <[email protected]>

update nuvoton-npcm750-runbmc dts i2c nodes which includeing:
1. ADC
2. EEPROM
3. i2c-switch
4. temperature sensor
5. ADM

---
 arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts | 257 +++++++++++++++++++
 1 file changed, 257 insertions(+)
arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts +257 -0
index 90210217d54c..e46015c56d24 100644
@@ -27,6 +27,20 @@
 		udc8 = &udc8;
 		udc9 = &udc9;
 		emmc0 = &sdhci0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		i2c12 = &i2c12;
+		i2c13 = &i2c13;
 		spi0 = &spi0;
 		spi1 = &spi1;
 		fiu0 = &fiu0;
@@ -249,6 +263,7 @@
 			};
 
 			adc: adc@c000 {
+				#io-channel-cells = <1>;
 				status = "okay";
 			};
 
@@ -277,6 +292,248 @@
 				};
 			};
 
+			i2c0: i2c@80000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				bus-frequency = <100000>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@81000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				bus-frequency = <100000>;
+				status = "okay";
+				i2c-switch@70 {
+					compatible = "nxp,pca9548";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x70>;
+					i2c-mux-idle-disconnect;
+
+					i2c_slot1a: i2c-bus@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+
+					i2c_slot1b: i2c-bus@1 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <1>;
+					};
+
+					i2c_slot2a: i2c-bus@2 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <2>;
+					};
+
+					i2c_slot2b: i2c-bus@3 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <3>;
+					};
+
+					i2c_slot3: i2c-bus@4 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <4>;
+					};
+
+					i2c_slot4: i2c-bus@5 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <5>;
+					};
+
+					i2c_slot5: i2c-bus@6 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <6>;
+					};
+				};
+
+				i2c-switch@71 {
+					compatible = "nxp,pca9546";
+					reg = <0x71>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					i2c-mux-idle-disconnect;
+
+					i2c_m2_s1: i2c-bus@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+
+					i2c_m2_s2: i2c-bus@1 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <1>;
+					};
+					i2c_m2_s3: i2c-bus@2 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <2>;
+					};
+
+					i2c_m2_s4: i2c-bus@3 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <3>;
+					};
+				};
+			};
+
+			i2c2: i2c@82000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				bus-frequency = <100000>;
+				status = "okay";
+				tmp421@4c {
+					compatible = "ti,tmp421";
+					reg = <0x4c>;
+				};
+			};
+
+			i2c3: i2c@83000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				bus-frequency = <100000>;
+				status = "okay";
+			};
+
+			i2c4: i2c@84000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				bus-frequency = <100000>;
+				status = "okay";
+				eeprom@54 {
+					compatible = "atmel,24c64";
+					reg = <0x54>;
+				};
+			};
+
+			i2c5: i2c@85000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				bus-frequency = <100000>;
+				status = "okay";
+			};
+
+			i2c6: i2c@86000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				bus-frequency = <100000>;
+				status = "okay";
+				ina219@40 {
+					compatible = "ti,ina219";
+					reg = <0x40>;
+				};
+				ina219@41 {
+					compatible = "ti,ina219";
+					reg = <0x41>;
+				};
+				ina219@44 {
+					compatible = "ti,ina219";
+					reg = <0x44>;
+				};
+				ina219@45 {
+					compatible = "ti,ina219";
+					reg = <0x45>;
+				};
+				tps53679@60 {
+					compatible = "ti,tps53679";
+					reg = <0x60>;
+				};
+				tps53679@70 {
+					compatible = "ti,tps53679";
+					reg = <0x70>;
+				};
+			};
+
+			i2c7: i2c@87000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				bus-frequency = <100000>;
+				status = "okay";
+				tmp421@4c {
+					compatible = "ti,tmp421";
+					reg = <0x4c>;
+				};
+
+				adc128d818@1d {
+					compatible = "ti,adc128d818";
+					reg = <0x1d>;
+					ti,mode = <1>;
+				};
+			};
+
+			i2c8: i2c@88000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				bus-frequency = <100000>;
+				status = "okay";
+				adm1278@11 {
+					compatible = "adm1278";
+					reg = <0x11>;
+					Rsense = <500>;
+				};
+
+				adm1278@12 {
+					compatible = "adm1278";
+					reg = <0x12>;
+					Rsense = <500>;
+				};
+			};
+
+			i2c9: i2c@89000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				bus-frequency = <100000>;
+				status = "okay";
+			};
+
+			i2c10: i2c@8a000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				bus-frequency = <100000>;
+				status = "okay";
+			};
+
+			i2c11: i2c@8b000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				bus-frequency = <100000>;
+				status = "okay";
+			};
+
+			i2c12: i2c@8c000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				bus-frequency = <100000>;
+				status = "okay";
+			};
+
+			i2c13: i2c@8d000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				bus-frequency = <100000>;
+				status = "okay";
+				tmp75@4a {
+					compatible = "ti,tmp75";
+					reg = <0x4a>;
+					status = "okay";
+				};
+				m24128_fru@51 {
+					compatible = "atmel,24c128";
+					reg = <0x51>;
+					pagesize = <64>;
+					status = "okay";
+				};
+			};
+
 			pwm_fan:pwm-fan-controller@103000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <   &pwm0_pins &pwm1_pins
Signature · 1 line
2.20.1
#4 lore raw

PATCH v2 5/7 ARM: dts: nuvoton: nuvoton-npcm750-runbmc: Add i2c IOExpand nodes

In reply to Samuel Jiang

From: Samuel Jiang <[email protected]>

update nuvoton-npcm750-runbmc i2c nodes which define gpios outside RunBMC module

---
 arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts | 404 +++++++++++++++++++
 1 file changed, 404 insertions(+)
arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts +404 -0
index e46015c56d24..35ce793d0238 100644
@@ -624,6 +624,410 @@
 	};
 };
 
+/* external io expander */
+
+&i2c10 {
+	gpio: pca9555@4e {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&i2c11 {
+	pca9539_g1a: pca9539-g1a@74 {
+		compatible = "nxp,pca9539";
+		reg = <0x74>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		reset-gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
+		G1A_P0_0 {
+			gpio-hog;
+			gpios = <0 0>;
+			output-high;
+			line-name = "TPM_BMC_ALERT_N";
+		};
+		G1A_P0_1 {
+			gpio-hog;
+			gpios = <1 0>;
+			input;
+			line-name = "FM_BIOS_TOP_SWAP";
+		};
+		G1A_P0_2 {
+			gpio-hog;
+			gpios = <2 0>;
+			input;
+			line-name = "FM_BIOS_PREFRB2_GOOD";
+		};
+		G1A_P0_3 {
+			gpio-hog;
+			gpios = <3 0>;
+			input;
+			line-name = "BMC_SATAXPCIE_0TO3_SEL";
+		};
+		G1A_P0_4 {
+			gpio-hog;
+			gpios = <4 0>;
+			input;
+			line-name = "BMC_SATAXPCIE_4TO7_SEL";
+		};
+		G1A_P0_5 {
+			gpio-hog;
+			gpios = <5 0>;
+			output-low;
+			line-name = "FM_UV_ADR_TRIGGER_EN_N";
+		};
+		G1A_P0_6 {
+			gpio-hog;
+			gpios = <6 0>;
+			input;
+			line-name = "RM_THROTTLE_EN_N";
+		};
+		G1A_P1_0 {
+			gpio-hog;
+			gpios = <8 0>;
+			input;
+			line-name = "FM_BMC_TPM_PRES_N";
+		};
+		G1A_P1_1 {
+			gpio-hog;
+			gpios = <9 0>;
+			input;
+			line-name = "FM_CPU0_SKTOCC_LVT3_N";
+		};
+		G1A_P1_2 {
+			gpio-hog;
+			gpios = <10 0>;
+			input;
+			line-name = "FM_CPU1_SKTOCC_LVT3_N";
+		};
+		G1A_P1_3 {
+			gpio-hog;
+			gpios = <11 0>;
+			input;
+			line-name = "PSU1_ALERT_N";
+		};
+		G1A_P1_4 {
+			gpio-hog;
+			gpios = <12 0>;
+			input;
+			line-name = "PSU2_ALERT_N";
+		};
+		G1A_P1_5 {
+			gpio-hog;
+			gpios = <13 0>;
+			input;
+			line-name = "H_CPU0_FAST_WAKE_LVT3_N";
+		};
+		G1A_P1_6 {
+			gpio-hog;
+			gpios = <14 0>;
+			output-high;
+			line-name = "I2C_MUX1_RESET_N";
+		};
+		G1A_P1_7 {
+			gpio-hog;
+			gpios = <15 0>;
+			input;
+			line-name = "FM_CPU_CATERR_LVT3_N";
+		};
+	};
+	pca9539_g1b: pca9539-g1b@75 {
+		compatible = "nxp,pca9539";
+		reg = <0x75>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		G1B_P0_0 {
+			gpio-hog;
+			gpios = <0 0>;
+			input;
+			line-name = "PVDDQ_ABC_PINALERT_N";
+		};
+		G1B_P0_1 {
+			gpio-hog;
+			gpios = <1 0>;
+			input;
+			line-name = "PVDDQ_DEF_PINALERT_N";
+		};
+		G1B_P0_2 {
+			gpio-hog;
+			gpios = <2 0>;
+			input;
+			line-name = "PVDDQ_GHJ_PINALERT_N";
+		};
+		G1B_P0_3 {
+			gpio-hog;
+			gpios = <3 0>;
+			input;
+			line-name = "PVDDQ_KLM_PINALERT_N";
+		};
+		G1B_P0_5 {
+			gpio-hog;
+			gpios = <5 0>;
+			input;
+			line-name = "FM_BOARD_REV_ID0";
+		};
+		G1B_P0_6 {
+			gpio-hog;
+			gpios = <6 0>;
+			input;
+			line-name = "FM_BOARD_REV_ID1";
+		};
+		G1B_P0_7 {
+			gpio-hog;
+			gpios = <7 0>;
+			input;
+			line-name = "FM_BOARD_REV_ID2";
+		};
+		G1B_P1_0 {
+			gpio-hog;
+			gpios = <8 0>;
+			input;
+			line-name = "FM_OC_DETECT_EN_N";
+		};
+		G1B_P1_1 {
+			gpio-hog;
+			gpios = <9 0>;
+			input;
+			line-name = "FM_FLASH_DESC_OVERRIDE";
+		};
+		G1B_P1_2 {
+			gpio-hog;
+			gpios = <10 0>;
+			output-low;
+			line-name = "FP_PWR_ID_LED_N";
+		};
+		G1B_P1_3 {
+			gpio-hog;
+			gpios = <11 0>;
+			output-low;
+			line-name = "BMC_LED_PWR_GRN";
+		};
+		G1B_P1_4 {
+			gpio-hog;
+			gpios = <12 0>;
+			output-low;
+			line-name = "BMC_LED_PWR_AMBER";
+		};
+		G1B_P1_5 {
+			gpio-hog;
+			gpios = <13 0>;
+			output-high;
+			line-name = "FM_BMC_FAULT_LED_N";
+		};
+		G1B_P1_6 {
+			gpio-hog;
+			gpios = <14 0>;
+			output-high;
+			line-name = "FM_CPLD_BMC_PWRDN_N";
+		};
+		G1B_P1_7 {
+			gpio-hog;
+			gpios = <15 0>;
+			output-high;
+			line-name = "BMC_LED_CATERR_N";
+		};
+	};
+};
+
+&i2c12 {
+	pca9539_g2a: pca9539-g2a@74 {
+		compatible = "nxp,pca9539";
+		reg = <0x74>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		reset-gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
+		G2A_P0_0 {
+			gpio-hog;
+			gpios = <0 0>;
+			output-high;
+			line-name = "BMC_PON_RST_REQ_N";
+		};
+		G2A_P0_1 {
+			gpio-hog;
+			gpios = <1 0>;
+			output-high;
+			line-name = "BMC_RST_IND_REQ_N";
+		};
+		G2A_P0_2 {
+			gpio-hog;
+			gpios = <2 0>;
+			input;
+			line-name = "RST_BMC_RTCRST";
+		};
+		G2A_P0_3 {
+			gpio-hog;
+			gpios = <3 0>;
+			output-high;
+			line-name = "FM_BMC_PWRBTN_OUT_N";
+		};
+		G2A_P0_4 {
+			gpio-hog;
+			gpios = <4 0>;
+			output-high;
+			line-name = "RST_BMC_SYSRST_BTN_OUT_N";
+		};
+		G2A_P0_5 {
+			gpio-hog;
+			gpios = <5 0>;
+			output-high;
+			line-name = "FM_BATTERY_SENSE_EN_N";
+		};
+		G2A_P0_6 {
+			gpio-hog;
+			gpios = <6 0>;
+			output-high;
+			line-name = "FM_BMC_READY_N";
+		};
+		G2A_P0_7 {
+			gpio-hog;
+			gpios = <7 0>;
+			input;
+			line-name = "IRQ_BMC_PCH_SMI_LPC_N";
+		};
+		G2A_P1_0 {
+			gpio-hog;
+			gpios = <8 0>;
+			input;
+			line-name = "FM_SLOT4_CFG0";
+		};
+		G2A_P1_1 {
+			gpio-hog;
+			gpios = <9 0>;
+			input;
+			line-name = "FM_SLOT4_CFG1";
+		};
+		G2A_P1_2 {
+			gpio-hog;
+			gpios = <10 0>;
+			input;
+			line-name = "FM_NVDIMM_EVENT_N";
+		};
+		G2A_P1_3 {
+			gpio-hog;
+			gpios = <11 0>;
+			input;
+			line-name = "PSU1_BLADE_EN_N";
+		};
+		G2A_P1_4 {
+			gpio-hog;
+			gpios = <12 0>;
+			input;
+			line-name = "BMC_PCH_FNM";
+		};
+		G2A_P1_5 {
+			gpio-hog;
+			gpios = <13 0>;
+			input;
+			line-name = "FM_SOL_UART_CH_SEL";
+		};
+		G2A_P1_6 {
+			gpio-hog;
+			gpios = <14 0>;
+			input;
+			line-name = "FM_BIOS_POST_CMPLT_N";
+		};
+	};
+
+	pca9539_g2b: pca9539-g2b@75 {
+		compatible = "nxp,pca9539";
+		reg = <0x75>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		G2B_P0_0 {
+			gpio-hog;
+			gpios = <0 0>;
+			input;
+			line-name = "FM_CPU_MSMI_LVT3_N";
+		};
+		G2B_P0_1 {
+			gpio-hog;
+			gpios = <1 0>;
+			input;
+			line-name = "FM_BIOS_MRC_DEBUG_MSG_DIS";
+		};
+		G2B_P0_2 {
+			gpio-hog;
+			gpios = <2 0>;
+			input;
+			line-name = "FM_CPU1_DISABLE_BMC_N";
+		};
+		G2B_P0_3 {
+			gpio-hog;
+			gpios = <3 0>;
+			output-low;
+			line-name = "BMC_JTAG_SELECT";
+		};
+		G2B_P0_4 {
+			gpio-hog;
+			gpios = <4 0>;
+			output-high;
+			line-name = "PECI_MUX_SELECT";
+		};
+		G2B_P0_5 {
+			gpio-hog;
+			gpios = <5 0>;
+			output-high;
+			line-name = "I2C_MUX2_RESET_N";
+		};
+		G2B_P0_6 {
+			gpio-hog;
+			gpios = <6 0>;
+			input;
+			line-name = "FM_BMC_CPLD_PSU2_ON";
+		};
+		G2B_P0_7 {
+			gpio-hog;
+			gpios = <7 0>;
+			output-high;
+			line-name = "PSU2_ALERT_EN_N";
+		};
+		G2B_P1_0 {
+			gpio-hog;
+			gpios = <8 0>;
+			output-high;
+			line-name = "FM_CPU_BMC_INIT";
+		};
+		G2B_P1_1 {
+			gpio-hog;
+			gpios = <9 0>;
+			output-high;
+			line-name = "IRQ_BMC_PCH_SCI_LPC_N";
+		};
+		G2B_P1_2 {
+			gpio-hog;
+			gpios = <10 0>;
+			output-low;
+			line-name = "PMB_ALERT_EN_N";
+		};
+		G2B_P1_3 {
+			gpio-hog;
+			gpios = <11 0>;
+			output-high;
+			line-name = "FM_FAST_PROCHOT_EN_N";
+		};
+		G2B_P1_4 {
+			gpio-hog;
+			gpios = <12 0>;
+			output-high;
+			line-name = "BMC_NVDIMM_PRSNT_N";
+		};
+		G2B_P1_5 {
+			gpio-hog;
+			gpios = <13 0>;
+			output-low;
+			line-name = "FM_BACKUP_BIOS_SEL_H_BMC";
+		};
+		G2B_P1_6 {
+			gpio-hog;
+			gpios = <14 0>;
+			output-high;
+			line-name = "FM_PWRBRK_N";
+		};
+	};
+};
+
 &gcr {
 	serial_port_mux: mux-controller {
 	compatible = "mmio-mux";
Signature · 1 line
2.20.1
#5 lore raw

PATCH v2 6/7 ARM: dts: nuvoton: nuvoton-npcm750-runbmc: gpios which inside module

In reply to Samuel Jiang

From: Samuel Jiang <[email protected]>

add nuvoton-npcm750-runbmc-gpio-dtsi which include runbmc gpios update nuvoton-npcm750-runbmc gpios which execute inside module

---
 .../boot/dts/nuvoton-npcm750-runbmc-gpio.dtsi | 157 ++++++++++++++++++
 arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts  |  37 +++++
 2 files changed, 194 insertions(+)
 create mode 100644 arch/arm/boot/dts/nuvoton-npcm750-runbmc-gpio.dtsi
arch/arm/boot/dts/nuvoton-npcm750-runbmc-gpio.dtsi new file +157 -0
new file mode 100644
index 000000000000..f2f575d099ab
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2019 Quanta Computer Inc. [email protected]
+
+/ {
+	pinctrl: pinctrl@f0800000 {
+		gpio0ol_pins: gpio0ol-pins {
+			pins = "GPIO0/IOX1DI";
+			bias-disable;
+			output-low;
+		};
+		gpio1ol_pins: gpio1ol-pins {
+			pins = "GPIO1/IOX1LD";
+			bias-disable;
+			output-low;
+		};
+		gpio2ol_pins: gpio2ol-pins {
+			pins = "GPIO2/IOX1CK";
+			bias-disable;
+			output-low;
+		};
+		gpio3ol_pins: gpio3ol-pins {
+			pins = "GPIO3/IOX1D0";
+			bias-disable;
+			output-low;
+		};
+		gpio8o_pins: gpio8o-pins {
+			pins = "GPIO8/LKGPO1";
+			bias-disable;
+			output-high;
+		};
+		gpio9ol_pins: gpio9ol-pins {
+			pins = "GPIO9/LKGPO2";
+			bias-disable;
+			output-low;
+		};
+		gpio12ol_pins: gpio12ol-pins {
+			pins = "GPIO12/GSPICK/SMB5BSCL";
+			bias-disable;
+			output-low;
+		};
+		gpio13ol_pins: gpio13ol-pins {
+			pins = "GPIO13/GSPIDO/SMB5BSDA";
+			bias-disable;
+			output-low;
+		};
+		gpio14ol_pins: gpio14ol-pins {
+			pins = "GPIO14/GSPIDI/SMB5CSCL";
+			bias-disable;
+			output-low;
+		};
+		gpio15ol_pins: gpio15ol-pins {
+			pins = "GPIO15/GSPICS/SMB5CSDA";
+			bias-disable;
+			output-low;
+		};
+		gpio37ol_pins: gpio37ol-pins {
+			pins = "GPIO37/SMB3CSDA";
+			bias-disable;
+			output-low;
+		};
+		gpio38_pins: gpio38-pins {
+			pins = "GPIO38/SMB3CSCL";
+			bias-disable;
+			input-enable;
+		};
+		gpio39_pins: gpio39-pins {
+			pins = "GPIO39/SMB3BSDA";
+			bias-disable;
+			input-enable;
+		};
+		gpio94ol_pins: gpio94ol-pins {
+			pins = "GPIO94/nKBRST/SMB5DSDA";
+			bias-disable;
+			output-low;
+		};
+		gpio108ol_pins: gpio108ol-pins {
+			pins = "GPIO108/RG1MDC";
+			bias-disable;
+			output-low;
+		};
+		gpio109ol_pins: gpio109ol-pins {
+			pins = "GPIO109/RG1MDIO";
+			bias-disable;
+			output-low;
+		};
+		gpio110ol_pins: gpio110ol-pins {
+			pins = "GPIO110/RG2TXD0/DDRV0";
+			bias-disable;
+			output-low;
+		};
+		gpio111ol_pins: gpio111ol-pins {
+			pins = "GPIO111/RG2TXD1/DDRV1";
+			bias-disable;
+			output-low;
+		};
+		gpio112ol_pins: gpio112ol-pins {
+			pins = "GPIO112/RG2TXD2/DDRV2";
+			bias-disable;
+			output-low;
+		};
+		gpio113ol_pins: gpio113ol-pins {
+			pins = "GPIO113/RG2TXD3/DDRV3";
+			bias-disable;
+			output-low;
+		};
+		gpio208_pins: gpio208-pins {
+			pins = "GPIO208/RG2TXC/DVCK";
+			bias-disable;
+			input-enable;
+		};
+		gpio209ol_pins: gpio209ol-pins {
+			pins = "GPIO209/RG2TXCTL/DDRV4";
+			bias-disable;
+			output-low;
+		};
+		gpio210ol_pins: gpio210ol-pins {
+			pins = "GPIO210/RG2RXD0/DDRV5";
+			bias-disable;
+			output-low;
+		};
+		gpio211ol_pins: gpio211ol-pins {
+			pins = "GPIO211/RG2RXD1/DDRV6";
+			bias-disable;
+			output-low;
+		};
+		gpio212ol_pins: gpio212ol-pins {
+			pins = "GPIO212/RG2RXD2/DDRV7";
+			bias-disable;
+			output-low;
+		};
+		gpio213ol_pins: gpio213ol-pins {
+			pins = "GPIO213/RG2RXD3/DDRV8";
+			bias-disable;
+			output-low;
+		};
+		gpio214ol_pins: gpio214ol-pins {
+			pins = "GPIO214/RG2RXC/DDRV9";
+			bias-disable;
+			output-low;
+		};
+		gpio215ol_pins: gpio215ol-pins {
+			pins = "GPIO215/RG2RXCTL/DDRV10";
+			bias-disable;
+			output-low;
+		};
+		gpio216ol_pins: gpio216ol-pins {
+			pins = "GPIO216/RG2MDC/DDRV11";
+			bias-disable;
+			output-low;
+		};
+		gpio217ol_pins: gpio217ol-pins {
+			pins = "GPIO217/RG2MDIO/DVHSYNC";
+			bias-disable;
+			output-low;
+		};
+	};
+};
arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts +37 -0
index 35ce793d0238..53d59ee07e71 100644
@@ -4,6 +4,7 @@
 
 /dts-v1/;
 #include "nuvoton-npcm750.dtsi"
+#include "nuvoton-npcm750-runbmc-gpio.dtsi"
 
 / {
 	model = "Nuvoton npcm750 RunBMC Module";
@@ -609,6 +610,42 @@
 		};
 	};
 
+	pinctrl: pinctrl@f0800000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <
+				/******* RunBMC inside Module pins *******/
+				&gpio0ol_pins
+				&gpio1ol_pins
+				&gpio2ol_pins
+				&gpio3ol_pins
+				&gpio8o_pins
+				&gpio9ol_pins
+				&gpio12ol_pins
+				&gpio13ol_pins
+				&gpio14ol_pins
+				&gpio15ol_pins
+				&gpio37ol_pins
+				&gpio38_pins
+				&gpio39_pins
+				&gpio94ol_pins
+				&gpio108ol_pins
+				&gpio109ol_pins
+				&gpio111ol_pins
+				&gpio112ol_pins
+				&gpio113ol_pins
+				&gpio208_pins
+				&gpio209ol_pins
+				&gpio210ol_pins
+				&gpio211ol_pins
+				&gpio212ol_pins
+				&gpio213ol_pins
+				&gpio214ol_pins
+				&gpio215ol_pins
+				&gpio216ol_pins
+				&gpio217ol_pins
+				>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		heartbeat {
Signature · 1 line
2.20.1
#6 lore raw

PATCH v2 7/7 ARM: dts: nuvoton: nuvoton-npcm750-runbmc: define gpios outside Module

In reply to Samuel Jiang

From: Samuel Jiang <[email protected]>

update nuvoton-npcm750-runbmc and runbmc-gpio-dtsi gpios which outside runbmc module

---
 .../boot/dts/nuvoton-npcm750-runbmc-gpio.dtsi | 360 ++++++++++++++++++
 arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts  |  76 ++++
 2 files changed, 436 insertions(+)
arch/arm/boot/dts/nuvoton-npcm750-runbmc-gpio.dtsi +360 -0
index f2f575d099ab..18f320c14fe0 100644
@@ -23,6 +23,21 @@
 			bias-disable;
 			output-low;
 		};
+		gpio5_pins: gpio5-pins {
+			pins = "GPIO5/IOX2LD/SMB1DSCL";
+			bias-disable;
+			input-enable;
+		};
+		gpio6_pins: gpio6-pins {
+			pins = "GPIO6/IOX2CK/SMB2DSDA";
+			bias-disable;
+			input-enable;
+		};
+		gpio7_pins: gpio7-pins {
+			pins = "GPIO7/IOX2D0/SMB2DSCL";
+			bias-disable;
+			input-enable;
+		};
 		gpio8o_pins: gpio8o-pins {
 			pins = "GPIO8/LKGPO1";
 			bias-disable;
@@ -33,6 +48,16 @@
 			bias-disable;
 			output-low;
 		};
+		gpio10_pins: gpio10-pins {
+			pins = "GPIO10/IOXHLD";
+			bias-disable;
+			input-enable;
+		};
+		gpio11_pins: gpio11-pins {
+			pins = "GPIO11/IOXHCK";
+			bias-disable;
+			input-enable;
+		};
 		gpio12ol_pins: gpio12ol-pins {
 			pins = "GPIO12/GSPICK/SMB5BSCL";
 			bias-disable;
@@ -53,6 +78,46 @@
 			bias-disable;
 			output-low;
 		};
+		gpio20_pins: gpio20-pins {
+			pins = "GPIO20/SMB4CSDA/SMB15SDA";
+			bias-disable;
+			input-enable;
+		};
+		gpio21_pins: gpio21-pins {
+			pins = "GPIO21/SMB4CSCL/SMB15SCL";
+			bias-disable;
+			input-enable;
+		};
+		gpio22o_pins: gpio22o-pins {
+			pins = "GPIO22/SMB4DSDA/SMB14SDA";
+			bias-disable;
+			output-high;
+		};
+		gpio23_pins: gpio23-pins {
+			pins = "GPIO23/SMB4DSCL/SMB14SCL";
+			bias-disable;
+			input-enable;
+		};
+		gpio24_pins: gpio24-pins {
+			pins = "GPIO24/IOXHDO";
+			bias-disable;
+			input-enable;
+		};
+		gpio25_pins: gpio25-pins {
+			pins = "GPIO25/IOXHDI";
+			bias-disable;
+			input-enable;
+		};
+		gpio30_pins: gpio27-pins {
+			pins = "GPIO30/SMB3SDA";
+			bias-disable;
+			input-enable;
+		};
+		gpio31_pins: gpio27-pins {
+			pins = "GPIO31/SMB3SCL";
+			bias-disable;
+			input-enable;
+		};
 		gpio37ol_pins: gpio37ol-pins {
 			pins = "GPIO37/SMB3CSDA";
 			bias-disable;
@@ -68,6 +133,86 @@
 			bias-disable;
 			input-enable;
 		};
+		gpio40o_pins: gpio40o-pins {
+			pins = "GPIO40/SMB3BSCL";
+			bias-disable;
+			output-high;
+		};
+		gpio59_pins: gpio59-pins {
+			pins = "GPIO59/SMB3DSDA";
+			bias-disable;
+			input-enable;
+		};
+		gpio76_pins: gpio76-pins {
+			pins = "GPIO76/FANIN12";
+			bias-disable;
+			input-enable;
+		};
+		gpio77_pins: gpio77-pins {
+			pins = "GPIO77/FANIN13";
+			bias-disable;
+			input-enable;
+		};
+		gpio78o_pins: gpio78o-pins {
+			pins = "GPIO78/FANIN14";
+			bias-disable;
+			output-high;
+		};
+		gpio79_pins: gpio79-pins {
+			pins = "GPIO79/FANIN15";
+			bias-disable;
+			input-enable;
+		};
+		gpio82_pins: gpio82-pins {
+			pins = "GPIO82/PWM2";
+			bias-disable;
+			input-enable;
+		};
+		gpio83_pins: gpio83-pins {
+			pins = "GPIO83/PWM3";
+			bias-disable;
+			input-enable;
+		};
+		gpio84_pins: gpio84-pins {
+			pins = "GPIO84/R2TXD0";
+			bias-disable;
+			input-enable;
+		};
+		gpio85o_pins: gpio85o-pins {
+			pins = "GPIO85/R2TXD1";
+			bias-disable;
+			output-high;
+		};
+		gpio86ol_pins: gpio86ol-pins {
+			pins = "GPIO86/R2TXEN";
+			bias-disable;
+			output-low;
+		};
+		gpio87_pins: gpio87-pins {
+			pins = "GPIO87/R2RXD0";
+			bias-disable;
+			input-enable;
+		};
+		gpio88_pins: gpio88-pins {
+			pins = "GPIO88/R2RXD1";
+			bias-disable;
+			input-enable;
+		};
+		gpio89_pins: gpio89-pins {
+			pins = "GPIO89/R2CRSDV";
+			bias-disable;
+			input-enable;
+		};
+		gpio90_pins: gpio90-pins {
+			pins = "GPIO90/R2RXERR";
+			bias-disable;
+			input-enable;
+		};
+		gpio93_pins: gpio93-pins {
+			pins = "GPIO93/GA20/SMB5DSCL";
+			bias-disable;
+			input-enable;
+		};
 		gpio94ol_pins: gpio94ol-pins {
 			pins = "GPIO94/nKBRST/SMB5DSDA";
 			bias-disable;
@@ -103,6 +248,181 @@
 			bias-disable;
 			output-low;
 		};
+		gpio114o_pins: gpio114o-pins {
+			pins = "GPIO114/SMB0SCL";
+			bias-disable;
+			output-high;
+		};
+		gpio115_pins: gpio115-pins {
+			pins = "GPIO115/SMB0SDA";
+			bias-disable;
+			input-enable;
+		};
+		gpio120_pins: gpio120-pins {
+			pins = "GPIO120/SMB2CSDA";
+			bias-disable;
+			input-enable;
+		};
+		gpio121_pins: gpio121-pins {
+			pins = "GPIO121/SMB2CSCL";
+			bias-disable;
+			input-enable;
+		};
+		gpio122_pins: gpio122-pins {
+			pins = "GPIO122/SMB2BSDA";
+			bias-disable;
+			input-enable;
+		};
+		gpio123_pins: gpio123-pins {
+			pins = "GPIO123/SMB2BSCL";
+			bias-disable;
+			input-enable;
+		};
+		gpio124_pins: gpio124-pins {
+			pins = "GPIO124/SMB1CSDA";
+			bias-disable;
+			input-enable;
+		};
+		gpio125_pins: gpio125-pins {
+			pins = "GPIO125/SMB1CSCL";
+			bias-disable;
+			input-enable;
+		};
+		gpio126_pins: gpio126-pins {
+			pins = "GPIO126/SMB1BSDA";
+			bias-disable;
+			input-enable;
+		};
+		gpio127o_pins: gpio127o-pins {
+			pins = "GPIO127/SMB1BSCL";
+			bias-disable;
+			output-high;
+		};
+		gpio136_pins: gpio136-pins {
+			pins = "GPIO136/SD1DT0";
+			bias-disable;
+			input-enable;
+		};
+		gpio137_pins: gpio137-pins {
+			pins = "GPIO137/SD1DT1";
+			bias-disable;
+			input-enable;
+		};
+		gpio138_pins: gpio138-pins {
+			pins = "GPIO138/SD1DT2";
+			bias-disable;
+			input-enable;
+		};
+		gpio139_pins: gpio139-pins {
+			pins = "GPIO139/SD1DT3";
+			bias-disable;
+			input-enable;
+		};
+		gpio140_pins: gpio140-pins {
+			pins = "GPIO140/SD1CLK";
+			bias-disable;
+			input-enable;
+		};
+		gpio141_pins: gpio141-pins {
+			pins = "GPIO141/SD1WP";
+			bias-disable;
+			input-enable;
+		};
+		gpio142_pins: gpio142-pins {
+			pins = "GPIO142/SD1CMD";
+			bias-disable;
+			input-enable;
+		};
+		gpio143_pins: gpio143-pins {
+			pins = "GPIO143/SD1CD/SD1PWR";
+			bias-disable;
+			input-enable;
+		};
+		gpio144_pins: gpio144-pins {
+			pins = "GPIO144/PWM4";
+			bias-disable;
+			input-enable;
+		};
+		gpio145_pins: gpio145-pins {
+			pins = "GPIO145/PWM5";
+			bias-disable;
+			input-enable;
+		};
+		gpio146_pins: gpio146-pins {
+			pins = "GPIO146/PWM6";
+			bias-disable;
+			input-enable;
+		};
+		gpio147_pins: gpio147-pins {
+			pins = "GPIO147/PWM7";
+			bias-disable;
+			input-enable;
+		};
+		gpio153o_pins: gpio153o-pins {
+			pins = "GPIO153/MMCWP";
+			bias-disable;
+			output-high;
+		};
+		gpio155_pins: gpio155-pins {
+			pins = "GPIO155/nMMCCD/nMMCRST";
+			bias-disable;
+			input-enable;
+		};
+		gpio160o_pins: gpio160o-pins {
+			pins = "GPIO160/CLKOUT/RNGOSCOUT";
+			bias-disable;
+			output-high;
+		};
+		gpio169o_pins: gpio169o-pins {
+			pins = "GPIO169/nSCIPME";
+			bias-disable;
+			output-high;
+		};
+		gpio188o_pins: gpio188o-pins {
+			pins = "GPIO188/SPI3D2/nSPI3CS2";
+			bias-disable;
+			output-high;
+		};
+		gpio189_pins: gpio189-pins {
+			pins = "GPIO189/SPI3D3/nSPI3CS3";
+			bias-disable;
+			input-enable;
+		};
+		gpio196_pins: gpio196-pins {
+			pins = "GPIO196/SMB0CSCL";
+			bias-disable;
+			input-enable;
+		};
+		gpio197_pins: gpio197-pins {
+			pins = "GPIO197/SMB0DEN";
+			bias-disable;
+			input-enable;
+		};
+		gpio198o_pins: gpio198o-pins {
+			pins = "GPIO198/SMB0DSDA";
+			bias-disable;
+			output-high;
+		};
+		gpio199o_pins: gpio199o-pins {
+			pins = "GPIO199/SMB0DSCL";
+			bias-disable;
+			output-high;
+		};
+		gpio200_pins: gpio200-pins {
+			pins = "GPIO200/R2CK";
+			input-enable;
+			bias-disable;
+		};
+		gpio202_pins: gpio202-pins {
+			pins = "GPIO202/SMB0CSDA";
+			bias-disable;
+			input-enable;
+		};
+		gpio203o_pins: gpio203o-pins {
+			pins = "GPIO203/FANIN16";
+			bias-disable;
+			output-high;
+		};
 		gpio208_pins: gpio208-pins {
 			pins = "GPIO208/RG2TXC/DVCK";
 			bias-disable;
@@ -153,5 +473,45 @@
 			bias-disable;
 			output-low;
 		};
+		gpio224_pins: gpio224-pins {
+			pins = "GPIO224/SPIXCK";
+			bias-disable;
+			input-enable;
+		};
+		gpio225ol_pins: gpio225ol-pins {
+			pins = "GPO225/SPIXD0/STRAP12";
+			bias-disable;
+			output-low;
+		};
+		gpio226ol_pins: gpio226ol-pins {
+			pins = "GPO226/SPIXD1/STRAP13";
+			bias-disable;
+			output-low;
+		};
+		gpio227ol_pins: gpio227ol-pins {
+			pins = "GPIO227/nSPIXCS0";
+			bias-disable;
+			output-low;
+		};
+		gpio228o_pins: gpio228ol-pins {
+			pins = "GPIO228/nSPIXCS1";
+			bias-disable;
+			output-high;
+		};
+		gpio229o_pins: gpio229o-pins {
+			pins = "GPO229/SPIXD2/STRAP3";
+			bias-disable;
+			output-high;
+		};
+		gpio230_pins: gpio230-pins {
+			pins = "GPIO230/SPIXD3";
+			bias-disable;
+			input-enable;
+		};
+		gpio231o_pins: gpio231o-pins {
+			pins = "GPIO231/nCLKREQ";
+			bias-disable;
+			output-high;
+		};
 	};
 };
arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts +76 -0

82 lines not on this page · raw message

Signature · 1 line
2.20.1