rockchip: rk3399: derive ethaddr from cpuid
Subsystems (3)
PATCH v2 1/3 rockchip: rk3399: derive ethaddr from cpuid
Generate a MAC address based on the cpuid available in the efuse
block: Use the first 6 byte of the cpuid's SHA256 hash and set the locally administered bits. Also ensure that the multicast bit is cleared.
The MAC address is only generated and set if there is no ethaddr present in the saved environment.
This is based off of Klaus Goger's work in 8adc9d
---
arch/arm/include/asm/arch-rockchip/misc.h | 13 +++ arch/arm/mach-rockchip/Makefile | 2 + arch/arm/mach-rockchip/misc.c | 108 ++++++++++++++++++++++ board/rockchip/evb_rk3399/evb-rk3399.c | 13 +++ 4 files changed, 136 insertions(+) create mode 100644 arch/arm/include/asm/arch-rockchip/misc.h create mode 100644 arch/arm/mach-rockchip/misc.c
arch/arm/include/asm/arch-rockchip/misc.h new file +13 -0
@@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* RK3399: Architecture common definitions +* +* Copyright (C) 2019 Collabora Inc - https://www.collabora.com/ +* Rohan Garg <[email protected]> +*/ + +void rockchip_cpuid_from_efuse (const u32 cpuid_offset, +const u32 cpuid_length, +u8 *cpuid); +void rockchip_cpuid_set (const u8 *cpuid,const u32 cpuid_length); +void rockchip_setup_macaddr (void );
arch/arm/mach-rockchip/Makefile +2 -0
@@ -47,6 +47,8 @@ obj-y += rk_timer.o endif endif +obj-y += misc.o + obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036/ obj-$(CONFIG_ROCKCHIP_RK3128) += rk3128/ ifndef CONFIG_TPL_BUILD
arch/arm/mach-rockchip/misc.c new file +108 -0
108 lines not on this page · raw message
board/rockchip/evb_rk3399/evb-rk3399.c +13 -0
@@ -7,6 +7,7 @@#include <dm.h> #include <dm/pinctrl.h> #include <asm/arch-rockchip/periph.h> +#include <asm/arch-rockchip/misc.h> #include <power/regulator.h> int board_init (void )
@@ -33,3 +34,15 @@ int board_init(void) out:return 0 ; } + +int misc_init_r (void ) +{ +const u32 cpuid_offset =0x7 ; +const u32 cpuid_length =0x10 ; +u8 cpuid[cpuid_length]; + +rockchip_cpuid_from_efuse (cpuid_offset, cpuid_length, cpuid); +rockchip_cpuid_set (cpuid, cpuid_length); +rockchip_setup_macaddr (); +return 0 ; +}
Signature · 1 line
2.17.1
PATCH v2 2/3 rockchip: rk3399: Enable CONFIG_MISC_INIT_R for the Rock PI 4
This enables us to set a static MAC address
---
configs/rock-pi-4-rk3399_defconfig | 1 + 1 file changed, 1 insertion(+)
configs/rock-pi-4-rk3399_defconfig +1 -0
@@ -58,3 +58,4 @@ CONFIG_USB_ETHER_SMSC95XX=y CONFIG_USE_TINY_PRINTF=y CONFIG_SPL_TINY_MEMSET=y CONFIG_ERRNO_STR=y +CONFIG_MISC_INIT_R=y
Signature · 1 line
2.17.1
PATCH v2 3/3 board: puma: Use rockchip_* helpers to setup cpuid and macaddr
In reply to Rohan GargWe should use the shared helpers to setup the necessary parts
---
.../puma_rk3399/puma-rk3399.c | 98 ++----------------- 1 file changed, 8 insertions(+), 90 deletions(-)
board/theobroma-systems/puma_rk3399/puma-rk3399.c +8 -90
@@ -17,6 +17,7 @@#include <asm/arch-rockchip/clock.h> #include <asm/arch-rockchip/hardware.h> #include <asm/arch-rockchip/grf_rk3399.h> +#include <asm/arch-rockchip/misc.h> #include <asm/arch-rockchip/periph.h> #include <power/regulator.h> #include <u-boot/sha256.h>
@@ -36,94 +37,6 @@ int board_init(void)return 0 ; } -static void setup_macaddr (void ) -{ -#if CONFIG_IS_ENABLED (CMD_NET ) -int ret; -const char *cpuid =env_get ("cpuid#" ); -u8 hash[SHA256_SUM_LEN ]; -int size =sizeof (hash); -u8 mac_addr[6 ]; - -/* Only generate a MAC address, if none is set in the environment */ -if (env_get ("ethaddr" )) -return ; - -if (!cpuid) { -debug ("%s: could not retrieve 'cpuid#'\n" , __func__); -return ; - } - - ret =hash_block ("sha256" , (void *)cpuid,strlen (cpuid), hash, &size); -if (ret) { -debug ("%s: failed to calculate SHA256\n" , __func__); -return ; - } - -/* Copy 6 bytes of the hash to base the MAC address on */ -memcpy (mac_addr, hash,6 ); - -/* Make this a valid MAC address and set it */ - mac_addr[0 ] &=0xfe ;/* clear multicast bit */ - mac_addr[0 ] |=0x02 ;/* set local assignment bit (IEEE802) */ -eth_env_set_enetaddr ("ethaddr" , mac_addr); -#endif -} - -static void setup_serial (void ) -{ -#if CONFIG_IS_ENABLED (ROCKCHIP_EFUSE ) -const u32 cpuid_offset =0x7 ; -const u32 cpuid_length =0x10 ; - -struct udevice *dev; -int ret, i; -u8 cpuid[cpuid_length]; -u8 low[cpuid_length/2 ], high[cpuid_length/2 ]; -char cpuid_str[cpuid_length *2 +1 ]; -u64 serialno; -char serialno_str[17 ]; - -/* retrieve the device */ - ret =uclass_get_device_by_driver (UCLASS_MISC , -DM_GET_DRIVER (rockchip_efuse), &dev); -if (ret) { -debug ("%s: could not find efuse device\n" , __func__); -return ; - } - -/* read the cpu_id range from the efuses */ - ret =misc_read (dev, cpuid_offset, &cpuid,sizeof (cpuid)); -if (ret) { -debug ("%s: reading cpuid from the efuses failed\n" , - __func__); -return ; - } - -memset (cpuid_str,0 ,sizeof (cpuid_str)); -for (i =0 ; i <16 ; i++) -sprintf (&cpuid_str[i *2 ],"%02x" , cpuid[i]); - -debug ("cpuid: %s\n" , cpuid_str); - -/* -* Mix the cpuid bytes using the same rules as in -* ${linux}/drivers/soc/rockchip/rockchip-cpuinfo.c -*/ -for (i =0 ; i <8 ; i++) { - low[i] = cpuid[1 + (i <<1 )]; - high[i] = cpuid[i <<1 ]; - } - - serialno =crc32_no_comp (0 , low,8 ); - serialno |= (u64 )crc32_no_comp (serialno, high,8 ) <<32 ; -snprintf (serialno_str,sizeof (serialno_str),"%016llx" , serialno); - -env_set ("cpuid#" , cpuid_str); -env_set ("serial#" , serialno_str); -#endif -} -static void setup_iodomain (void ) {const u32 GRF_IO_VSEL_GPIO4CD_SHIFT =3 ;
@@ -213,8 +126,13 @@ static int setup_boottargets(void)int misc_init_r (void ) { -setup_serial (); -setup_macaddr (); +const u32 cpuid_offset =0x7 ; +const u32 cpuid_length =0x10 ; +u8 cpuid[cpuid_length]; + +rockchip_cpuid_from_efuse (cpuid_offset, cpuid_length, cpuid); +rockchip_cpuid_set (cpuid, cpuid_length); +rockchip_setup_macaddr ();setup_iodomain ();setup_boottargets ();
Signature · 1 line
2.17.1
PATCH v2 1/3 rockchip: rk3399: derive ethaddr from cpuid
In reply to Rohan GargHi Rohan,
Quoted 46 lines · Rohan Garg
Generate a MAC address based on the cpuid available in the efuse
block: Use the first 6 byte of the cpuid's SHA256 hash and set the locally administered bits. Also ensure that the multicast bit is cleared.The MAC address is only generated and set if there is no ethaddr present in the saved environment.
This is based off of Klaus Goger's work in 8adc9d
Signed-off-by Rohan Garg <[email protected]>---
arch/arm/include/asm/arch-rockchip/misc.h | 13 +++ arch/arm/mach-rockchip/Makefile | 2 + arch/arm/mach-rockchip/misc.c | 108 ++++++++++++++++++++++ board/rockchip/evb_rk3399/evb-rk3399.c | 13 +++ 4 files changed, 136 insertions(+)create mode 100644
arch/arm/include/asm/arch-rockchip/misc.hcreate mode 100644arch/arm/mach-rockchip/misc.carch/arm/include/asm/arch-rockchip/misc.h new file +13
-0@@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* RK3399: Architecture common definitions +* +* Copyright (C) 2019 Collabora Inc - https://www.collabora.com/ +* Rohan Garg <[email protected]> +*/ + +void rockchip_cpuid_from_efuse (const u32 cpuid_offset, +const u32 cpuid_length, +u8 *cpuid); +void rockchip_cpuid_set (const u8 *cpuid,const u32 cpuid_length); +void rockchip_setup_macaddr (void );arch/arm/mach-rockchip/Makefile +0
-0
arch/arm/mach-rockchip/Makefile obj-y += rk_timer.o · line 50
Quoted 4 lines
arch/arm/mach-rockchip/Makefile +1
-0@@ -47,6 +47,8 @@ obj-y += rk_timer.o endif endif +obj-y += misc.o
This should be depends on CONFIG_MISC_INIT_R.
Quoted 131 lines
arch/arm/mach-rockchip/Makefile +1
-0+ obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036/ obj-$(CONFIG_ROCKCHIP_RK3128) += rk3128/ ifndef CONFIG_TPL_BUILDarch/arm/mach-rockchip/misc.c new file +108
-0@@ -0,0 +1,108 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* RK3399: Architecture common definitions +* +* Copyright (C) 2019 Collabora Inc - https://www.collabora.com/ +* Rohan Garg <[email protected]> +* +* Based on puma-rk3399.c: +* (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH +*/ + +#include <common.h> +#include <u-boot/sha256.h> +#include <dm/uclass-internal.h> +#include <environment.h> + +#include <asm/arch-rockchip/misc.h> + +void rockchip_setup_macaddr (void ) +{ +#if CONFIG_IS_ENABLED (CMD_NET ) +int ret; +const char *cpuid =env_get ("cpuid#" ); +u8 hash[SHA256_SUM_LEN ]; +int size =sizeof (hash); +u8 mac_addr[6 ]; + +/* Only generate a MAC address, if none is set in the environment */ +if (env_get ("ethaddr" )) +return ; + +if (!cpuid) { +debug ("%s: could not retrieve 'cpuid#'\n" , __func__); +return ; + } + + ret =hash_block ("sha256" , (void *)cpuid,strlen (cpuid), hash, &size); +if (ret) { +debug ("%s: failed to calculate SHA256\n" , __func__); +return ; + } + +/* Copy 6 bytes of the hash to base the MAC address on */ +memcpy (mac_addr, hash,6 ); + +/* Make this a valid MAC address and set it */ + mac_addr[0 ] &=0xfe ;/* clear multicast bit */ + mac_addr[0 ] |=0x02 ;/* set local assignment bit (IEEE802) */ +eth_env_set_enetaddr ("ethaddr" , mac_addr); +#endif +} + +void rockchip_cpuid_from_efuse (const u32 cpuid_offset, +const u32 cpuid_length, +u8 *cpuid) +{ +#if CONFIG_IS_ENABLED (ROCKCHIP_EFUSE ) +struct udevice *dev; +int ret; + +/* retrieve the device */ + ret =uclass_get_device_by_driver (UCLASS_MISC , +DM_GET_DRIVER (rockchip_efuse), &dev); +if (ret) { +debug ("%s: could not find efuse device\n" , __func__); +return ; + } + +/* read the cpu_id range from the efuses */ + ret =misc_read (dev, cpuid_offset, cpuid,sizeof (cpuid)); +if (ret) { +debug ("%s: reading cpuid from the efuses failed\n" , + __func__); +return ; + } +#endif +} + +void rockchip_cpuid_set (const u8 *cpuid,const u32 cpuid_length) +{ +u8 low[cpuid_length/2 ], high[cpuid_length/2 ]; +char cpuid_str[cpuid_length *2 +1 ]; +u64 serialno; +char serialno_str[17 ]; +int i; + +memset (cpuid_str,0 ,sizeof (cpuid_str)); +for (i =0 ; i <16 ; i++) +sprintf (&cpuid_str[i *2 ],"%02x" , cpuid[i]); + +debug ("cpuid: %s\n" , cpuid_str); + +/* +* Mix the cpuid bytes using the same rules as in +* ${linux}/drivers/soc/rockchip/rockchip-cpuinfo.c +*/ +for (i =0 ; i <8 ; i++) { + low[i] = cpuid[1 + (i <<1 )]; + high[i] = cpuid[i <<1 ]; + } + + serialno =crc32_no_comp (0 , low,8 ); + serialno |= (u64 )crc32_no_comp (serialno, high,8 ) <<32 ; +snprintf (serialno_str,sizeof (serialno_str),"%016llx" , serialno); + +env_set ("cpuid#" , cpuid_str); +env_set ("serial#" , serialno_str); +}board/rockchip/evb_rk3399/evb-rk3399.c +1
-0@@ -7,6 +7,7 @@#include <dm.h> #include <dm/pinctrl.h> #include <asm/arch-rockchip/periph.h> +#include <asm/arch-rockchip/misc.h> #include <power/regulator.h> int board_init (void )
board/rockchip/evb_rk3399/evb-rk3399.c int board_init(void) · line 39
Quoted 6 lines
board/rockchip/evb_rk3399/evb-rk3399.c +3
-0@@ -33,3 +34,15 @@ int board_init(void) out:return 0 ; } + +int misc_init_r (void ) +{
It's great to make these code as common code so that other SoCs
can share it, is it possible to also make this function common?
Not every SoC have efuse driver, so for those SoCs, we need a random
serial No.
board/rockchip/evb_rk3399/evb-rk3399.c int board_init(void) · line 46
Quoted 7 lines
board/rockchip/evb_rk3399/evb-rk3399.c +7
-0+const u32 cpuid_offset =0x7 ; +const u32 cpuid_length =0x10 ; +u8 cpuid[cpuid_length]; + +rockchip_cpuid_from_efuse (cpuid_offset, cpuid_length, cpuid); +rockchip_cpuid_set (cpuid, cpuid_length); +rockchip_setup_macaddr ();
It will be better for these function calls with return value.
There should be a blank line before 'return';
Thanks,
- Kever
Quoted 2 lines
board/rockchip/evb_rk3399/evb-rk3399.c +2
-0+return 0 ; +}
PATCH v2 1/3 rockchip: rk3399: derive ethaddr from cpuid
Hey Kever
Quoted 3 lines
This should be depends on
CONFIG_MISC_INIT_R.
Ack.
Quoted 9 lines
It's great to make these code as common code so that other SoCs
can share it, is it possible to also make this function common?
Not every SoC have efuse driver, so for those SoCs, we need a random
serial No.
Do you think we can merge this as is for now and then move onto making it more generic for other devices at a later date?
Quoted 11 lines
board/rockchip/evb_rk3399/evb-rk3399.c int board_init(void) · line 46
Quoted 7 lines
board/rockchip/evb_rk3399/evb-rk3399.c +7
-0+const u32 cpuid_offset =0x7 ; +const u32 cpuid_length =0x10 ; +u8 cpuid[cpuid_length]; + +rockchip_cpuid_from_efuse (cpuid_offset, cpuid_length, cpuid); +rockchip_cpuid_set (cpuid, cpuid_length); +rockchip_setup_macaddr ();It will be better for these function calls with return value.
There should be a blank line before 'return';
Ack.
Cheers
Rohan Garg
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190719/8e070447/attachment.sig>
PATCH v2 1/3 rockchip: rk3399: derive ethaddr from cpuid
HI Rohan,
Quoted 8 lines · Rohan Garg
Hey Kever
Quoted 2 lines
This should be depends on
CONFIG_MISC_INIT_R.Ack.
Quoted 2 lines
It's great to make these code as common code so that other SoCs
Quoted 8 lines
Quoted 6 lines
can share it, is it possible to also make this function common?
Not every SoC have efuse driver, so for those SoCs, we need a random
serial No.
Do you think we can merge this as is for now and then move onto making it more generic for other devices at a later date?
This is a per-SoC feature, so it's fine to add this into rk3399-board.c without
much extra work, and other device can enable or disable it by the option
CONFIG_MISC_INIT_R. So I think you can move the code from evb-rk3399.c
to rk3399-board.c directly.
Thanks,
- Kever
Quoted 15 lines
Quoted 11 lines
board/rockchip/evb_rk3399/evb-rk3399.c int board_init(void) · line 46
Quoted 8 lines
board/rockchip/evb_rk3399/evb-rk3399.c +7
-0+const u32 cpuid_offset =0x7 ; +const u32 cpuid_length =0x10 ; +u8 cpuid[cpuid_length]; + +rockchip_cpuid_from_efuse (cpuid_offset, cpuid_length, cpuid); +rockchip_cpuid_set (cpuid, cpuid_length); +rockchip_setup_macaddr ();It will be better for these function calls with return value.
There should be a blank line before 'return';
Ack.
Cheers
Rohan Garg