Skip to contentSkip to conversation

drm/i915/display/icl: Bump up the hdisplay and vdisplay as per transcoder limits

PATCH In review Manasi Navare 4 participants 11 messages Jul 12, 2019 – Sep 17, 2019

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH v4 1/2 drm/i915/display/icl: Bump up the hdisplay and vdisplay as per transcoder limits

On ICL+, the vertical limits for the transcoders are increased to 8192 and horizontal limits are bumped to 16K so bump up
limits in intel_mode_valid()

v4:
* Increase the hdisplay to 16K (Ville)
v3:
* Supported starting ICL (Ville)
* Use the higher limits from TRANS_VTOTAL register (Ville) v2:
* Checkpatch warning (Manasi)

Cc Maarten Lankhorst <[email protected]>
Cc Ville Syrjälä <[email protected]>
---
 drivers/gpu/drm/i915/display/intel_display.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +7 -2
index f07081815b80..15006764862b 100644
@@ -15764,8 +15764,13 @@ intel_mode_valid(struct drm_device *dev,
 			   DRM_MODE_FLAG_CLKDIV2))
 		return MODE_BAD;
 
-	if (INTEL_GEN(dev_priv) >= 9 ||
-	    IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) {
+	if (INTEL_GEN(dev_priv) >= 11) {
+		hdisplay_max = 16384;
+		vdisplay_max = 8192;
+		htotal_max = 16384;
+		vtotal_max = 8192;
+	} else if (INTEL_GEN(dev_priv) >= 9 ||
+		   IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) {
 		hdisplay_max = 8192; /* FDI max 4096 handled elsewhere */
 		vdisplay_max = 4096;
 		htotal_max = 8192;
Signature · 6 lines
2.19.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

PATCH v4 2/2 drm/i915/display/icl: Bump up the plane/fb height

On ICL+, the max supported plane height is 4320, so bump it up To support 4320, we need to increase the number of bits used to read plane_height to 13 as opposed to older 12 bits.

v3:
* Use 0xffff for mask as extra bits are mbz (Ville) v2:
* ICL plane height supported is 4320 (Ville)
* Add a new line between max width and max height (Jose)

Cc Maarten Lankhorst <[email protected]>
Cc Ville Syrjälä <[email protected]>
---
 drivers/gpu/drm/i915/display/intel_display.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +17 -2
index 15006764862b..5103504bbbec 100644
@@ -3343,6 +3343,16 @@ static int icl_max_plane_width(const struct drm_framebuffer *fb,
 	return 5120;
 }
 
+static int skl_max_plane_height(void)
+{
+	return 4096;
+}
+
+static int icl_max_plane_height(void)
+{
+	return 4320;
+}
+
 static bool skl_check_main_ccs_coordinates(struct intel_plane_state *plane_state,
 					   int main_x, int main_y, u32 main_offset)
 {
@@ -3391,7 +3401,7 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)
 	int w = drm_rect_width(&plane_state->base.src) >> 16;
 	int h = drm_rect_height(&plane_state->base.src) >> 16;
 	int max_width;
-	int max_height = 4096;
+	int max_height;
 	u32 alignment, offset, aux_offset = plane_state->color_plane[1].offset;
 
 	if (INTEL_GEN(dev_priv) >= 11)
@@ -3401,6 +3411,11 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)
 	else
 		max_width = skl_max_plane_width(fb, 0, rotation);
 
+	if (INTEL_GEN(dev_priv) >= 11)
+		max_height = icl_max_plane_height();
+	else
+		max_height = skl_max_plane_height();
+
 	if (w > max_width || h > max_height) {
 		DRM_DEBUG_KMS("requested Y/RGB source size %dx%d too big (limit %dx%d)\n",
 			      w, h, max_width, max_height);
@@ -9865,7 +9880,7 @@ skylake_get_initial_plane_config(struct intel_crtc *crtc,
 	offset = I915_READ(PLANE_OFFSET(pipe, plane_id));
 
 	val = I915_READ(PLANE_SIZE(pipe, plane_id));
-	fb->height = ((val >> 16) & 0xfff) + 1;
+	fb->height = ((val >> 16) & 0xffff) + 1;
 	fb->width = ((val >> 0) & 0x1fff) + 1;
 
 	val = I915_READ(PLANE_STRIDE(pipe, plane_id));
Signature · 6 lines
2.19.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v4 2/2
#2 lore raw

Re: [PATCH v4 2/2] drm/i915/display/icl: Bump up the plane/fb height

Quoted 60 lines · Manasi Navare

On ICL+, the max supported plane height is 4320, so bump it up To support 4320, we need to increase the number of bits used to read plane_height to 13 as opposed to older 12 bits.

v3:
* Use 0xffff for mask as extra bits are mbz (Ville) v2:
* ICL plane height supported is 4320 (Ville)
* Add a new line between max width and max height (Jose)

Cc Maarten Lankhorst <[email protected]>
Cc Ville Syrjälä <[email protected]>
---
 drivers/gpu/drm/i915/display/intel_display.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +16 -1
index 15006764862b..5103504bbbec 100644
@@ -3343,6 +3343,16 @@ static int icl_max_plane_width(const struct drm_framebuffer *fb,
 	return 5120;
 }
 
+static int skl_max_plane_height(void)
+{
+	return 4096;
+}
+
+static int icl_max_plane_height(void)
+{
+	return 4320;
+}
+
 static bool skl_check_main_ccs_coordinates(struct intel_plane_state *plane_state,
 					   int main_x, int main_y, u32 main_offset)
 {
@@ -3391,7 +3401,7 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)
 	int w = drm_rect_width(&plane_state->base.src) >> 16;
 	int h = drm_rect_height(&plane_state->base.src) >> 16;
 	int max_width;
-	int max_height = 4096;
+	int max_height;
 	u32 alignment, offset, aux_offset = plane_state->color_plane[1].offset;
 
 	if (INTEL_GEN(dev_priv) >= 11)
@@ -3401,6 +3411,11 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)
 	else
 		max_width = skl_max_plane_width(fb, 0, rotation);
 
+	if (INTEL_GEN(dev_priv) >= 11)
+		max_height = icl_max_plane_height();
+	else
+		max_height = skl_max_plane_height();
+
 	if (w > max_width || h > max_height) {
 		DRM_DEBUG_KMS("requested Y/RGB source size %dx%d too big (limit %dx%d)\n",
 			      w, h, max_width, max_height);

drivers/gpu/drm/i915/display/intel_display.c skylake_get_initial_plane_config(struct intel_crtc *crtc, · line 9884

Quoted 6 lines
drivers/gpu/drm/i915/display/intel_display.c +1 -1
@@ -9865,7 +9880,7 @@ skylake_get_initial_plane_config(struct intel_crtc *crtc,
 	offset = I915_READ(PLANE_OFFSET(pipe, plane_id));
 
 	val = I915_READ(PLANE_SIZE(pipe, plane_id));
-	fb->height = ((val >> 16) & 0xfff) + 1;
+	fb->height = ((val >> 16) & 0xffff) + 1;
 	fb->width = ((val >> 0) & 0x1fff) + 1;

I would adjust the mask for width as well.

Quoted 4 lines
drivers/gpu/drm/i915/display/intel_display.c +0 -0
 	val = I915_READ(PLANE_STRIDE(pipe, plane_id));
Signature · 1 line
2.19.1
Signature · 6 lines
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#3 lore raw

PATCH v5 1/1 drm/i915/display/icl: Bump up the plane/fb height

In reply to Manasi Navare

On ICL+, the max supported plane height is 4320, so bump it up To support 4320, we need to increase the number of bits used to read plane_height to 13 as opposed to older 12 bits.

v4:
* Adjust the width mask also since extra bits are mbz (Ville) v3:
* Use 0xffff for mask as extra bits are mbz (Ville) v2:
* ICL plane height supported is 4320 (Ville)
* Add a new line between max width and max height (Jose)

---
 drivers/gpu/drm/i915/display/intel_display.c | 21 +++++++++++++++++---
 1 file changed, 18 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +18 -3
index 15006764862b..f7e31a89ed2a 100644
@@ -3343,6 +3343,16 @@ static int icl_max_plane_width(const struct drm_framebuffer *fb,
 	return 5120;
 }
 
+static int skl_max_plane_height(void)
+{
+	return 4096;
+}
+
+static int icl_max_plane_height(void)
+{
+	return 4320;
+}
+
 static bool skl_check_main_ccs_coordinates(struct intel_plane_state *plane_state,
 					   int main_x, int main_y, u32 main_offset)
 {
@@ -3391,7 +3401,7 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)
 	int w = drm_rect_width(&plane_state->base.src) >> 16;
 	int h = drm_rect_height(&plane_state->base.src) >> 16;
 	int max_width;
-	int max_height = 4096;
+	int max_height;
 	u32 alignment, offset, aux_offset = plane_state->color_plane[1].offset;
 
 	if (INTEL_GEN(dev_priv) >= 11)
@@ -3401,6 +3411,11 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)
 	else
 		max_width = skl_max_plane_width(fb, 0, rotation);
 
+	if (INTEL_GEN(dev_priv) >= 11)
+		max_height = icl_max_plane_height();
+	else
+		max_height = skl_max_plane_height();
+
 	if (w > max_width || h > max_height) {
 		DRM_DEBUG_KMS("requested Y/RGB source size %dx%d too big (limit %dx%d)\n",
 			      w, h, max_width, max_height);
@@ -9865,8 +9880,8 @@ skylake_get_initial_plane_config(struct intel_crtc *crtc,
 	offset = I915_READ(PLANE_OFFSET(pipe, plane_id));
 
 	val = I915_READ(PLANE_SIZE(pipe, plane_id));
-	fb->height = ((val >> 16) & 0xfff) + 1;
-	fb->width = ((val >> 0) & 0x1fff) + 1;
+	fb->height = ((val >> 16) & 0xffff) + 1;
+	fb->width = ((val >> 0) & 0xffff) + 1;
 
 	val = I915_READ(PLANE_STRIDE(pipe, plane_id));
 	stride_mult = skl_plane_stride_mult(fb, 0, DRM_MODE_ROTATE_0);
Signature · 6 lines
2.19.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v4 1/2
#4 lore raw
In reply to Manasi Navare
Quoted 12 lines · Manasi Navare

On ICL+, the vertical limits for the transcoders are increased to 8192 and horizontal limits are bumped to 16K so bump up
limits in intel_mode_valid()

v4:
* Increase the hdisplay to 16K (Ville)
v3:
* Supported starting ICL (Ville)
* Use the higher limits from TRANS_VTOTAL register (Ville) v2:
* Checkpatch warning (Manasi)

Quoted 3 lines
Cc Maarten Lankhorst <[email protected]>
Cc Ville Syrjälä <[email protected]>
Quoted 26 lines
---
 drivers/gpu/drm/i915/display/intel_display.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +7 -2
index f07081815b80..15006764862b 100644
@@ -15764,8 +15764,13 @@ intel_mode_valid(struct drm_device *dev,
 			   DRM_MODE_FLAG_CLKDIV2))
 		return MODE_BAD;
 
-	if (INTEL_GEN(dev_priv) >= 9 ||
-	    IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) {
+	if (INTEL_GEN(dev_priv) >= 11) {
+		hdisplay_max = 16384;
+		vdisplay_max = 8192;
+		htotal_max = 16384;
+		vtotal_max = 8192;
+	} else if (INTEL_GEN(dev_priv) >= 9 ||
+		   IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) {
 		hdisplay_max = 8192; /* FDI max 4096 handled elsewhere */
 		vdisplay_max = 4096;
 		htotal_max = 8192;
Signature · 1 line
2.19.1
Signature · 6 lines
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#5 lore raw

Hi Ville,

Thanks for your review, so do we want to merge this as is or
do we need some function to reject the 8K mode on ICL in intel_dp_mode_valid()?

Manasi

Quoted 31 lines · Ville Syrjälä
Quoted 12 lines · Manasi Navare

On ICL+, the vertical limits for the transcoders are increased to 8192 and horizontal limits are bumped to 16K so bump up
limits in intel_mode_valid()

v4:
* Increase the hdisplay to 16K (Ville)
v3:
* Supported starting ICL (Ville)
* Use the higher limits from TRANS_VTOTAL register (Ville) v2:
* Checkpatch warning (Manasi)

Quoted 3 lines
Cc Maarten Lankhorst <[email protected]>
Cc Ville Syrjälä <[email protected]>
Quoted 12 lines
---
 drivers/gpu/drm/i915/display/intel_display.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +0 -0
index f07081815b80..15006764862b 100644
@@ -15764,8 +15764,13 @@ intel_mode_valid(struct drm_device *dev,
 			   DRM_MODE_FLAG_CLKDIV2))
 		return MODE_BAD;
 
Quoted 18 lines
Quoted 14 lines
drivers/gpu/drm/i915/display/intel_display.c +7 -2
-	if (INTEL_GEN(dev_priv) >= 9 ||
-	    IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) {
+	if (INTEL_GEN(dev_priv) >= 11) {
+		hdisplay_max = 16384;
+		vdisplay_max = 8192;
+		htotal_max = 16384;
+		vtotal_max = 8192;
+	} else if (INTEL_GEN(dev_priv) >= 9 ||
+		   IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) {
 		hdisplay_max = 8192; /* FDI max 4096 handled elsewhere */
 		vdisplay_max = 4096;
 		htotal_max = 8192;
Signature · 1 line
2.19.1
Signature · 2 lines
Ville Syrjälä
Intel

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#6 lore raw

Hey,

Op 29-07-2019 om 21:17 schreef Manasi Navare:

Quoted 6 lines

Hi Ville,

Thanks for your review, so do we want to merge this as is or
do we need some function to reject the 8K mode on ICL in intel_dp_mode_valid()?

Manasi

I've pushed this series as-is because it blocks my bigjoiner work. We should probably reject modes in the connector specific functions if we can't handle it. :)

Quoted 41 lines · Ville Syrjälä
Quoted 39 lines · Manasi Navare
Quoted 12 lines

On ICL+, the vertical limits for the transcoders are increased to 8192 and horizontal limits are bumped to 16K so bump up
limits in intel_mode_valid()

v4:
* Increase the hdisplay to 16K (Ville)
v3:
* Supported starting ICL (Ville)
* Use the higher limits from TRANS_VTOTAL register (Ville) v2:
* Checkpatch warning (Manasi)

Quoted 3 lines
Cc Maarten Lankhorst <[email protected]>
Cc Ville Syrjälä <[email protected]>
Quoted 21 lines
---
 drivers/gpu/drm/i915/display/intel_display.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +7 -2
index f07081815b80..15006764862b 100644
@@ -15764,8 +15764,13 @@ intel_mode_valid(struct drm_device *dev,
 			   DRM_MODE_FLAG_CLKDIV2))
 		return MODE_BAD;
 
-	if (INTEL_GEN(dev_priv) >= 9 ||
-	    IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) {
+	if (INTEL_GEN(dev_priv) >= 11) {
+		hdisplay_max = 16384;
+		vdisplay_max = 8192;
+		htotal_max = 16384;
+		vtotal_max = 8192;
+	} else if (INTEL_GEN(dev_priv) >= 9 ||
+		   IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) {
Quoted 8 lines
Quoted 8 lines
Quoted 5 lines
drivers/gpu/drm/i915/display/intel_display.c +0 -0
 		hdisplay_max = 8192; /* FDI max 4096 handled elsewhere */
 		vdisplay_max = 4096;
 		htotal_max = 8192;
Signature · 1 line
2.19.1
Signature · 2 lines
Ville Syrjälä
Intel

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#7 lore raw
Quoted 11 lines · Maarten Lankhorst

Hey,

Op 29-07-2019 om 21:17 schreef Manasi Navare:

Quoted 6 lines

Hi Ville,

Thanks for your review, so do we want to merge this as is or
do we need some function to reject the 8K mode on ICL in intel_dp_mode_valid()?

Manasi

I've pushed this series as-is because it blocks my bigjoiner work. We should probably reject modes in the connector specific functions if we can't handle it. :)

Thanks Maarten. So in case of intel_dp_mode_valid() for example the 8K mode will be rejected if big joiner not supported correct?

Manasi

Quoted 43 lines
Quoted 43 lines · Ville Syrjälä
Quoted 39 lines · Manasi Navare
Quoted 12 lines

On ICL+, the vertical limits for the transcoders are increased to 8192 and horizontal limits are bumped to 16K so bump up
limits in intel_mode_valid()

v4:
* Increase the hdisplay to 16K (Ville)
v3:
* Supported starting ICL (Ville)
* Use the higher limits from TRANS_VTOTAL register (Ville) v2:
* Checkpatch warning (Manasi)

Quoted 3 lines
Cc Maarten Lankhorst <[email protected]>
Cc Ville Syrjälä <[email protected]>
Quoted 21 lines
---
 drivers/gpu/drm/i915/display/intel_display.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +7 -2
index f07081815b80..15006764862b 100644
@@ -15764,8 +15764,13 @@ intel_mode_valid(struct drm_device *dev,
 			   DRM_MODE_FLAG_CLKDIV2))
 		return MODE_BAD;
 
-	if (INTEL_GEN(dev_priv) >= 9 ||
-	    IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) {
+	if (INTEL_GEN(dev_priv) >= 11) {
+		hdisplay_max = 16384;
+		vdisplay_max = 8192;
+		htotal_max = 16384;
+		vtotal_max = 8192;
+	} else if (INTEL_GEN(dev_priv) >= 9 ||
+		   IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) {
Quoted 10 lines
Quoted 8 lines
Quoted 8 lines
Quoted 5 lines
drivers/gpu/drm/i915/display/intel_display.c +0 -0
 		hdisplay_max = 8192; /* FDI max 4096 handled elsewhere */
 		vdisplay_max = 4096;
 		htotal_max = 8192;
Signature · 1 line
2.19.1
Signature · 2 lines
Ville Syrjälä
Intel

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#8 lore raw

Op 16-09-2019 om 21:19 schreef Manasi Navare:

Quoted 12 lines · Maarten Lankhorst
Quoted 10 lines

Hey,

Op 29-07-2019 om 21:17 schreef Manasi Navare:

Quoted 6 lines

Hi Ville,

Thanks for your review, so do we want to merge this as is or
do we need some function to reject the 8K mode on ICL in intel_dp_mode_valid()?

Manasi

I've pushed this series as-is because it blocks my bigjoiner work. We should probably reject modes in the connector specific functions if we can't handle it. :)

Thanks Maarten. So in case of intel_dp_mode_valid() for example the 8K mode will be rejected if big joiner not supported correct?

Yeah, limits are too high. :)
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#9 lore raw

✓ Fi.CI.BAT: success for series starting with [v4,1/2] drm/i915/display/icl: Bump up the hdisplay and vdisplay as per transcoder limits (rev2)

In reply to Manasi Navare
== Series Details ==

== Series Details ==

Series: series starting with [v4,1/2] drm/i915/display/icl: Bump up the hdisplay and vdisplay as per transcoder limits (rev2)
URL : https://patchwork.freedesktop.org/series/63663/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_6480 -> Patchwork_13649
====================================================

Summary
-------

**SUCCESS**

No regressions found.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13649/

Known issues
------------

Here are the changes found in Patchwork_13649 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@gem_exec_suspend@basic-s4-devices:
- fi-blb-e6850: [PASS][1] -> [INCOMPLETE][2] ([fdo#107718])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6480/fi-blb-e6850/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13649/fi-blb-e6850/igt@[email protected]

* igt@kms_frontbuffer_tracking@basic:
- fi-hsw-peppy: [PASS][3] -> [DMESG-WARN][4] ([fdo#102614])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6480/fi-hsw-peppy/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13649/fi-hsw-peppy/igt@[email protected]

#### Possible fixes ####

* igt@gem_ctx_create@basic-files:
- fi-icl-dsi: [INCOMPLETE][5] ([fdo#107713] / [fdo#109100]) -> [PASS][6]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6480/fi-icl-dsi/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13649/fi-icl-dsi/igt@[email protected]

* {igt@gem_ctx_switch@legacy-render}:
- fi-icl-u3: [INCOMPLETE][7] ([fdo#107713]) -> [PASS][8]
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6480/fi-icl-u3/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13649/fi-icl-u3/igt@[email protected]

* igt@i915_selftest@live_contexts:
- fi-skl-iommu: [INCOMPLETE][9] ([fdo#111050]) -> [PASS][10]
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6480/fi-skl-iommu/igt@i915_selftest@live_contexts.html
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13649/fi-skl-iommu/igt@i915_selftest@live_contexts.html

{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).

[fdo#102614]: https://bugs.freedesktop.org/show_bug.cgi?id=102614
[fdo#107713]: https://bugs.freedesktop.org/show_bug.cgi?id=107713
[fdo#107718]: https://bugs.freedesktop.org/show_bug.cgi?id=107718
[fdo#109100]: https://bugs.freedesktop.org/show_bug.cgi?id=109100
[fdo#111050]: https://bugs.freedesktop.org/show_bug.cgi?id=111050

Participating hosts (53 -> 45)
------------------------------

Additional (2): fi-apl-guc fi-cml-u
Missing (10): fi-kbl-soraka fi-ilk-m540 fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-pnv-d510 fi-icl-y fi-byt-clapper fi-bdw-samus fi-kbl-r

Build changes
-------------

* Linux: CI_DRM_6480 -> Patchwork_13649

CI_DRM_6480: a4856ee98f5d0058656d4fd8efb4ffa433bdfaa4 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_5096: bb4d55a02dd3e1971f2c091a13b6bd7f0b496e40 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_13649: 6142cf0e6d9b4c6082078c5f967c98235551512c @ git://anongit.freedesktop.org/gfx-ci/linux

== Linux commits ==

6142cf0e6d9b drm/i915/display/icl: Bump up the plane/fb height
c9444846a700 drm/i915/display/icl: Bump up the hdisplay and vdisplay as per transcoder limits

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13649/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#10 lore raw

✓ Fi.CI.IGT: success for series starting with [v4,1/2] drm/i915/display/icl: Bump up the hdisplay and vdisplay as per transcoder limits (rev2)

In reply to Manasi Navare
== Series Details ==

== Series Details ==

Series: series starting with [v4,1/2] drm/i915/display/icl: Bump up the hdisplay and vdisplay as per transcoder limits (rev2)
URL : https://patchwork.freedesktop.org/series/63663/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_6480_full -> Patchwork_13649_full
====================================================

Summary
-------

**SUCCESS**

No regressions found.

Known issues
------------

Here are the changes found in Patchwork_13649_full that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@kms_cursor_legacy@2x-long-cursor-vs-flip-legacy:
- shard-hsw: [PASS][1] -> [FAIL][2] ([fdo#105767])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6480/shard-hsw5/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13649/shard-hsw1/igt@[email protected]

* igt@kms_flip@flip-vs-expired-vblank-interruptible:
- shard-skl: [PASS][3] -> [FAIL][4] ([fdo#105363])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6480/shard-skl4/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13649/shard-skl5/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-pri-indfb-draw-render:
- shard-iclb: [PASS][5] -> [FAIL][6] ([fdo#103167]) +3 similar issues
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6480/shard-iclb3/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-pri-indfb-draw-render.html
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13649/shard-iclb7/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-pri-indfb-draw-render.html

* igt@kms_frontbuffer_tracking@fbc-2p-scndscrn-pri-indfb-draw-mmap-cpu:
- shard-hsw: [PASS][7] -> [SKIP][8] ([fdo#109271]) +1 similar issue
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6480/shard-hsw4/igt@kms_frontbuffer_tracking@fbc-2p-scndscrn-pri-indfb-draw-mmap-cpu.html
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13649/shard-hsw5/igt@kms_frontbuffer_tracking@fbc-2p-scndscrn-pri-indfb-draw-mmap-cpu.html

* igt@kms_pipe_crc_basic@suspend-read-crc-pipe-c:
- shard-apl: [PASS][9] -> [DMESG-WARN][10] ([fdo#108566]) +1 similar issue
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6480/shard-apl8/igt@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13649/shard-apl3/igt@[email protected]

* igt@kms_plane_alpha_blend@pipe-c-coverage-7efc:
- shard-skl: [PASS][11] -> [FAIL][12] ([fdo#108145] / [fdo#110403])
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6480/shard-skl1/igt@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13649/shard-skl6/igt@[email protected]

* igt@kms_psr@no_drrs:
- shard-iclb: [PASS][13] -> [FAIL][14] ([fdo#108341])
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6480/shard-iclb6/igt@kms_psr@no_drrs.html
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13649/shard-iclb1/igt@kms_psr@no_drrs.html

* igt@kms_psr@psr2_suspend:
- shard-iclb: [PASS][15] -> [SKIP][16] ([fdo#109441]) +1 similar issue
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6480/shard-iclb2/igt@kms_psr@psr2_suspend.html
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13649/shard-iclb1/igt@kms_psr@psr2_suspend.html

* igt@kms_setmode@basic:
- shard-kbl: [PASS][17] -> [FAIL][18] ([fdo#99912])
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6480/shard-kbl6/igt@[email protected]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13649/shard-kbl3/igt@[email protected]

* igt@kms_vblank@pipe-a-ts-continuation-suspend:
- shard-kbl: [PASS][19] -> [DMESG-WARN][20] ([fdo#108566])
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6480/shard-kbl4/igt@[email protected]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13649/shard-kbl1/igt@[email protected]

#### Possible fixes ####

* igt@i915_pm_backlight@fade_with_suspend:
- shard-iclb: [INCOMPLETE][21] ([fdo#107713] / [fdo#107820]) -> [PASS][22]
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6480/shard-iclb5/igt@i915_pm_backlight@fade_with_suspend.html
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13649/shard-iclb5/igt@i915_pm_backlight@fade_with_suspend.html

* igt@i915_suspend@sysfs-reader:
- shard-apl: [DMESG-WARN][23] ([fdo#108566]) -> [PASS][24] +3 similar issues
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6480/shard-apl7/igt@[email protected]
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13649/shard-apl5/igt@[email protected]

* igt@kms_busy@extended-modeset-hang-newfb-render-c:
- shard-kbl: [DMESG-WARN][25] ([fdo#103313] / [fdo#103558] / [fdo#105602] / [fdo#110222]) -> [PASS][26]
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6480/shard-kbl1/igt@[email protected]
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13649/shard-kbl4/igt@[email protected]

* igt@kms_cursor_crc@pipe-b-cursor-alpha-transparent:
- shard-snb: [SKIP][27] ([fdo#109271]) -> [PASS][28] +1 similar issue
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6480/shard-snb6/igt@[email protected]
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13649/shard-snb7/igt@[email protected]

* igt@kms_draw_crc@draw-method-xrgb8888-mmap-gtt-ytiled:
- shard-skl: [FAIL][29] ([fdo#103184] / [fdo#103232] / [fdo#108145]) -> [PASS][30]
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6480/shard-skl8/igt@[email protected]
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13649/shard-skl8/igt@[email protected]

* igt@kms_flip@2x-flip-vs-expired-vblank-interruptible:
- shard-glk: [FAIL][31] ([fdo#105363]) -> [PASS][32]
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6480/shard-glk2/igt@[email protected]
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13649/shard-glk8/igt@[email protected]

* igt@kms_flip@flip-vs-expired-vblank:
- shard-skl: [FAIL][33] ([fdo#105363]) -> [PASS][34]
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6480/shard-skl10/igt@[email protected]
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13649/shard-skl9/igt@[email protected]

* igt@kms_flip@flip-vs-suspend:
- shard-kbl: [DMESG-WARN][35] ([fdo#103558] / [fdo#105602] / [fdo#108566]) -> [PASS][36]
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6480/shard-kbl1/igt@[email protected]
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13649/shard-kbl4/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbc-1p-offscren-pri-shrfb-draw-pwrite:
- shard-iclb: [FAIL][37] ([fdo#103167]) -> [PASS][38] +4 similar issues
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6480/shard-iclb7/igt@kms_frontbuffer_tracking@fbc-1p-offscren-pri-shrfb-draw-pwrite.html
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13649/shard-iclb6/igt@kms_frontbuffer_tracking@fbc-1p-offscren-pri-shrfb-draw-pwrite.html

* igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-pri-shrfb-draw-mmap-gtt:
- shard-skl: [FAIL][39] ([fdo#108040]) -> [PASS][40]
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6480/shard-skl8/igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-pri-shrfb-draw-mmap-gtt.html
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13649/shard-skl8/igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-pri-shrfb-draw-mmap-gtt.html

* igt@kms_frontbuffer_tracking@fbcpsr-rgb565-draw-mmap-gtt:
- shard-skl: [FAIL][41] ([fdo#103167]) -> [PASS][42]
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6480/shard-skl8/igt@[email protected]
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13649/shard-skl8/igt@[email protected]

* igt@kms_pipe_crc_basic@bad-source:
- shard-kbl: [DMESG-WARN][43] ([fdo#103558] / [fdo#105602]) -> [PASS][44] +11 similar issues
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6480/shard-kbl1/igt@[email protected]
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13649/shard-kbl4/igt@[email protected]

* igt@kms_plane_alpha_blend@pipe-a-coverage-7efc:
- shard-skl: [FAIL][45] ([fdo#108145]) -> [PASS][46]
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6480/shard-skl8/igt@[email protected]
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13649/shard-skl8/igt@[email protected]

* igt@kms_psr@psr2_primary_page_flip:
- shard-iclb: [SKIP][47] ([fdo#109441]) -> [PASS][48] +5 similar issues
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6480/shard-iclb4/igt@kms_psr@psr2_primary_page_flip.html
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13649/shard-iclb2/igt@kms_psr@psr2_primary_page_flip.html

* igt@kms_universal_plane@universal-plane-pipe-a-functional:
- shard-skl: [FAIL][49] -> [PASS][50]
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6480/shard-skl8/igt@[email protected]
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13649/shard-skl8/igt@[email protected]

* igt@perf_pmu@rc6:
- shard-kbl: [SKIP][51] ([fdo#109271]) -> [PASS][52]
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6480/shard-kbl7/igt@[email protected]
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13649/shard-kbl2/igt@[email protected]

#### Warnings ####

* igt@kms_atomic_transition@4x-modeset-transitions:
- shard-kbl: [SKIP][53] ([fdo#105602] / [fdo#109271] / [fdo#109278]) -> [SKIP][54] ([fdo#109271] / [fdo#109278]) +1 similar issue
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6480/shard-kbl1/igt@[email protected]
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13649/shard-kbl4/igt@[email protected]

* igt@kms_dp_dsc@basic-dsc-enable-edp:
- shard-iclb: [SKIP][55] ([fdo#109349]) -> [DMESG-WARN][56] ([fdo#107724])
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6480/shard-iclb4/igt@[email protected]
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13649/shard-iclb2/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-pri-shrfb-draw-render:
- shard-kbl: [SKIP][57] ([fdo#105602] / [fdo#109271]) -> [SKIP][58] ([fdo#109271]) +10 similar issues
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6480/shard-kbl1/igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-pri-shrfb-draw-render.html
[58]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13649/shard-kbl4/igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-pri-shrfb-draw-render.html

[fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
[fdo#103184]: https://bugs.freedesktop.org/show_bug.cgi?id=103184
[fdo#103232]: https://bugs.freedesktop.org/show_bug.cgi?id=103232
[fdo#103313]: https://bugs.freedesktop.org/show_bug.cgi?id=103313
[fdo#103558]: https://bugs.freedesktop.org/show_bug.cgi?id=103558
[fdo#105363]: https://bugs.freedesktop.org/show_bug.cgi?id=105363
[fdo#105602]: https://bugs.freedesktop.org/show_bug.cgi?id=105602
[fdo#105767]: https://bugs.freedesktop.org/show_bug.cgi?id=105767
[fdo#107713]: https://bugs.freedesktop.org/show_bug.cgi?id=107713
[fdo#107724]: https://bugs.freedesktop.org/show_bug.cgi?id=107724
[fdo#107820]: https://bugs.freedesktop.org/show_bug.cgi?id=107820
[fdo#108040]: https://bugs.freedesktop.org/show_bug.cgi?id=108040
[fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
[fdo#108341]: https://bugs.freedesktop.org/show_bug.cgi?id=108341
[fdo#108566]: https://bugs.freedesktop.org/show_bug.cgi?id=108566
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
[fdo#109349]: https://bugs.freedesktop.org/show_bug.cgi?id=109349
[fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
[fdo#110222]: https://bugs.freedesktop.org/show_bug.cgi?id=110222
[fdo#110403]: https://bugs.freedesktop.org/show_bug.cgi?id=110403
[fdo#99912]: https://bugs.freedesktop.org/show_bug.cgi?id=99912

Participating hosts (10 -> 10)
------------------------------

No changes in participating hosts

Build changes
-------------

* Linux: CI_DRM_6480 -> Patchwork_13649

CI_DRM_6480: a4856ee98f5d0058656d4fd8efb4ffa433bdfaa4 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_5096: bb4d55a02dd3e1971f2c091a13b6bd7f0b496e40 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_13649: 6142cf0e6d9b4c6082078c5f967c98235551512c @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13649/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx