Clock enhancements
cover Clock enhancements
This patch series add OPP tables,HS400 quirk for SD clock, add support Z2 clock and fix some of parent clocks.
This patch series is based on linux-4.19.y-cip and all the patches in this series are cherry-picked from linux rc tree.
Biju Das (2):
clk: renesas: rcar-gen3: Parameterise Z and Z2 clock fixed divisor
clk: renesas: rcar-gen3: Parameterise Z and Z2 clock offset
Fabrizio Castro (3):
clk: renesas: r8a774a1: Add missing CANFD clock
clk: renesas: r8a774a1: Fix LAST_DT_CORE_CLK
arm64: dts: renesas: r8a774c0: Add OPPs table for cpu devices
Geert Uytterhoeven (2):
clk: renesas: r8a774a1: Add CPEX clock
clk: renesas: rcar-gen3: Pass name/offset to cpg_sd_clk_register()
Kazuya Mizuguchi (2):
clk: renesas: rcar-gen3: Correct parent clock of EHCI/OHCI
clk: renesas: rcar-gen3: Correct parent clock of HS-USB
Niklas S?derlund (3):
clk: renesas: rcar-gen3: Set state when registering SD clocks
clk: renesas: rcar-gen3: Add documentation for SD clocks
clk: renesas: rcar-gen3: Add HS400 quirk for SD clock
Sergei Shtylyov (2):
clk: renesas: rcar-gen3: Factor out cpg_reg_modify()
clk: renesas: rcar-gen3: Add spinlock
Simon Horman (4):
clk: renesas: rcar-gen3: Remove CLK_TYPE_GEN3_Z2
math64: New DIV64_U64_ROUND_CLOSEST helper
clk: renesas: rcar-gen3: Support Z and Z2 clocks with high frequency
parents
clk: renesas: r8a774c0: Add Z2 clock
Stephen Boyd (2):
clk: renesas: Remove usage of CLK_IS_BASIC
clk: renesas: rcar-gen3: Remove unused variable
Takeshi Kihara (3):
clk: renesas: rcar-gen3: Correct parent clock of SYS-DMAC
clk: renesas: rcar-gen3: Correct parent clock of Audio-DMAC
clk: renesas: rcar-gen3: Fix cpg_sd_clock_round_rate() return value
arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 25 ++++ drivers/clk/renesas/clk-div6.c | 2 +- drivers/clk/renesas/clk-mstp.c | 2 +- drivers/clk/renesas/r8a774a1-cpg-mssr.c | 23 ++-- drivers/clk/renesas/r8a774c0-cpg-mssr.c | 7 +- drivers/clk/renesas/r8a7795-cpg-mssr.c | 25 ++-- drivers/clk/renesas/r8a7796-cpg-mssr.c | 19 +-- drivers/clk/renesas/r8a77965-cpg-mssr.c | 16 +-- drivers/clk/renesas/r8a77990-cpg-mssr.c | 6 +- drivers/clk/renesas/r8a77995-cpg-mssr.c | 2 +- drivers/clk/renesas/rcar-gen3-cpg.c | 174 ++++++++++++++------------ drivers/clk/renesas/rcar-gen3-cpg.h | 5 +- drivers/clk/renesas/renesas-cpg-mssr.c | 2 +- include/dt-bindings/clock/r8a774a1-cpg-mssr.h | 1 + include/linux/math64.h | 13 ++ 15 files changed, 193 insertions(+), 129 deletions(-)
Signature · 1 line
2.7.4
PATCH 1/23 clk: renesas: r8a774a1: Add CPEX clock
From: Geert Uytterhoeven <[email protected]>
commit f845b01d478a4d139fe3493f1e6ec8d9110ce56c upstream.
Implement support for the CPEX clock on RZ/G2M. This clock can be selected as a clock source for CMT1 (Compare Match Timer Type 1).
--- drivers/clk/renesas/r8a774a1-cpg-mssr.c | 1 + 1 file changed, 1 insertion(+)
drivers/clk/renesas/r8a774a1-cpg-mssr.c +1 -0
@@ -100,6 +100,7 @@ static const struct cpg_core_clk r8a774a1_core_clks[] __initconst = {DEF_FIXED ("cl" ,R8A774A1_CLK_CL ,CLK_PLL1_DIV2 ,48 ,1 ),DEF_FIXED ("cp" ,R8A774A1_CLK_CP ,CLK_EXTAL ,2 ,1 ), +DEF_FIXED ("cpex" ,R8A774A1_CLK_CPEX ,CLK_EXTAL ,2 ,1 ),DEF_DIV6P1 ("csi0" ,R8A774A1_CLK_CSI0 ,CLK_PLL1_DIV4 ,0x00c ), DEF_DIV6P1("mso", R8A774A1_CLK_MSO, CLK_PLL1_DIV4, 0x014),
Signature · 1 line
2.7.4
PATCH 2/23 clk: renesas: rcar-gen3: Set state when registering SD clocks
In reply to Biju DasFrom: Niklas S?derlund <[email protected]>
commit ecda0a09fa9933bcd67e33c952f778f0872392ed upstream.
The driver tries to figure out which state a SD clock is in when the clock is registered, instead of setting a known state. This can be problematic for two reasons.
1. If the clock driver can't figure out the state of the clock, registration of the clock fails, and setting of a known state by a clock user is not possible.
2. The state of the clock depends on if and how the bootloader configured it. The driver only checks that the rate is known, not if the clock is stopped or not for example.
Fix this by setting a known state and making sure the clock is stopped.
--- drivers/clk/renesas/rcar-gen3-cpg.c | 16 ++++------------ 1 file changed, 4 insertions(+), 12 deletions(-)
drivers/clk/renesas/rcar-gen3-cpg.c +4 -12
@@ -363,7 +363,7 @@ static struct clk * __init cpg_sd_clk_register(const struct cpg_core_clk *core,struct sd_clock *clock;struct clk *clk;unsigned int i; -u32 sd_fc; +u32 val; clock =kzalloc (sizeof (*clock),GFP_KERNEL );if (!clock)
@@ -380,17 +380,9 @@ static struct clk * __init cpg_sd_clk_register(const struct cpg_core_clk *core, clock->div_table = cpg_sd_div_table; clock->div_num =ARRAY_SIZE (cpg_sd_div_table); - sd_fc =readl (clock->csn.reg) &CPG_SD_FC_MASK ; -for (i =0 ; i < clock->div_num; i++) -if (sd_fc == (clock->div_table[i].val &CPG_SD_FC_MASK )) -break ; - -if (WARN_ON (i >= clock->div_num)) { -kfree (clock); -return ERR_PTR (-EINVAL ); - } - - clock->cur_div_idx = i; + val =readl (clock->csn.reg) & ~CPG_SD_FC_MASK ; + val |=CPG_SD_STP_MASK | (clock->div_table[0 ].val &CPG_SD_FC_MASK ); +writel (val, clock->csn.reg); clock->div_max = clock->div_table[0 ].div; clock->div_min = clock->div_max;
Signature · 1 line
2.7.4
PATCH 3/23 clk: renesas: rcar-gen3: Add documentation for SD clocks
In reply to Biju DasFrom: Niklas S?derlund <[email protected]>
commit e2f4dd1f5b51b4dab813aa6e4db44e87aa750393 upstream.
Document the known use cases of the different clock settings. This is useful as different SoC and ES versions use different settings to do the same thing as there is more than one combination to achieve the same SDn clock speed.
--- drivers/clk/renesas/rcar-gen3-cpg.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/clk/renesas/rcar-gen3-cpg.c +5 -5
@@ -235,13 +235,13 @@ struct sd_clock {* sd_srcfc sd_fc div * stp_hck stp_ck (div) (div) = sd_srcfc x sd_fc *------------------------------------------------------------------- -* 0 0 0 (1) 1 (4) 4 -* 0 0 1 (2) 1 (4) 8 -* 1 0 2 (4) 1 (4) 16 -* 1 0 3 (8) 1 (4) 32 +* 0 0 0 (1) 1 (4) 4 : SDR104 / HS200 / HS400 (8 TAP) +* 0 0 1 (2) 1 (4) 8 : SDR50 +* 1 0 2 (4) 1 (4) 16 : HS / SDR25 +* 1 0 3 (8) 1 (4) 32 : NS / SDR12 * 1 0 4 (16) 1 (4) 64 * 0 0 0 (1) 0 (2) 2 -* 0 0 1 (2) 0 (2) 4 +* 0 0 1 (2) 0 (2) 4 : SDR104 / HS200 / HS400 (4 TAP) * 1 0 2 (4) 0 (2) 8 * 1 0 3 (8) 0 (2) 16 * 1 0 4 (16) 0 (2) 32
Signature · 1 line
2.7.4
PATCH 4/23 clk: renesas: rcar-gen3: Add HS400 quirk for SD clock
In reply to Biju DasFrom: Niklas S?derlund <[email protected]>
commit 36c4da4f552a126bb29a95dc5c9608795491e32a upstream.
On H3 (ES1.x, ES2.0) and M3-W (ES1.0, ES1.1) the clock setting for HS400 needs a quirk to function properly. The reason for the quirk is that there are two settings which produces same divider value for the SDn clock. On the effected boards the one currently selected results in HS400 not working.
This change uses the same method as the Gen2 CPG driver and simply ignores the first clock setting as this is the offending one when selecting the settings. Which of the two possible settings is used have no effect for SDR104.
--- drivers/clk/renesas/rcar-gen3-cpg.c | 33 ++++++++++++++++++++++++++------- 1 file changed, 26 insertions(+), 7 deletions(-)
drivers/clk/renesas/rcar-gen3-cpg.c +26 -7
@@ -245,6 +245,10 @@ struct sd_clock {* 1 0 2 (4) 0 (2) 8 * 1 0 3 (8) 0 (2) 16 * 1 0 4 (16) 0 (2) 32 +* +* NOTE: There is a quirk option to ignore the first row of the dividers +* table when searching for suitable settings. This is because HS400 on +* early ES versions of H3 and M3-W requires a specific setting to work. */ static const struct sd_div_table cpg_sd_div_table[] = {/* CPG_SD_DIV_TABLE_DATA(stp_hck, stp_ck, sd_srcfc, sd_fc, sd_div) */
@@ -355,6 +359,12 @@ static const struct clk_ops cpg_sd_clock_ops = { .set_rate = cpg_sd_clock_set_rate, }; +static u32 cpg_quirks__initdata ; + +#define PLL_ERRATA BIT(0)/* Missing PLL0/2/4 post-divider */ +#define RCKCR_CKSEL BIT(1)/* Manual RCLK parent selection */ +#define SD_SKIP_FIRST BIT(2)/* Skip first clock in SD table */ +static struct clk *__init cpg_sd_clk_register (const struct cpg_core_clk *core,void __iomem *base,const char *parent_name,struct raw_notifier_head *notifiers)
@@ -380,6 +390,11 @@ static struct clk * __init cpg_sd_clk_register(const struct cpg_core_clk *core, clock->div_table = cpg_sd_div_table; clock->div_num =ARRAY_SIZE (cpg_sd_div_table); +if (cpg_quirks &SD_SKIP_FIRST ) { + clock->div_table++; + clock->div_num--; + } + val =readl (clock->csn.reg) & ~CPG_SD_FC_MASK ; val |=CPG_SD_STP_MASK | (clock->div_table[0 ].val &CPG_SD_FC_MASK );writel (val, clock->csn.reg);
@@ -407,23 +422,27 @@ static struct clk * __init cpg_sd_clk_register(const struct cpg_core_clk *core,static const struct rcar_gen3_cpg_pll_config *cpg_pll_config__initdata ;static unsigned int cpg_clk_extalr__initdata ;static u32 cpg_mode__initdata ; -static u32 cpg_quirks__initdata ; - -#define PLL_ERRATA BIT(0)/* Missing PLL0/2/4 post-divider */ -#define RCKCR_CKSEL BIT(1)/* Manual RCLK parent selection */ static const struct soc_device_attribute cpg_quirks_match[]__initconst = { { .soc_id ="r8a7795" , .revision ="ES1.0" , - .data = (void *)(PLL_ERRATA |RCKCR_CKSEL ), + .data = (void *)(PLL_ERRATA |RCKCR_CKSEL |SD_SKIP_FIRST ), }, { .soc_id ="r8a7795" , .revision ="ES1.*" , - .data = (void *)RCKCR_CKSEL , + .data = (void *)(RCKCR_CKSEL |SD_SKIP_FIRST ), + }, + { + .soc_id ="r8a7795" , .revision ="ES2.0" , + .data = (void *)SD_SKIP_FIRST , }, { .soc_id ="r8a7796" , .revision ="ES1.0" , - .data = (void *)RCKCR_CKSEL , + .data = (void *)(RCKCR_CKSEL |SD_SKIP_FIRST ), + }, + { + .soc_id ="r8a7796" , .revision ="ES1.1" , + .data = (void *)SD_SKIP_FIRST , }, {/* sentinel */ } };
Signature · 1 line
2.7.4
PATCH 5/23 clk: renesas: Remove usage of CLK_IS_BASIC
In reply to Biju DasFrom: Stephen Boyd <[email protected]>
commit ddbae6658d4dc495ac62f7977062b33bb15d1af6 upstream.
This flag doesn't look to be used by any code, just set in various clk init structures and then never tested again. Remove it from these drivers as it doesn't provide any benefit.
--- drivers/clk/renesas/clk-div6.c | 2 +- drivers/clk/renesas/clk-mstp.c | 2 +- drivers/clk/renesas/rcar-gen3-cpg.c | 2 +- drivers/clk/renesas/renesas-cpg-mssr.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-)
drivers/clk/renesas/clk-div6.c +1 -1
@@ -277,7 +277,7 @@ struct clk * __init cpg_div6_register(const char *name,/* Register the clock. */ init.name = name; init.ops = &cpg_div6_clock_ops; - init.flags =CLK_IS_BASIC ; + init.flags =0 ; init.parent_names = parent_names; init.num_parents = valid_parents;
drivers/clk/renesas/clk-mstp.c +1 -1
@@ -161,7 +161,7 @@ static struct clk * __init cpg_mstp_clock_register(const char *name, init.name = name; init.ops = &cpg_mstp_clock_ops; - init.flags =CLK_IS_BASIC |CLK_SET_RATE_PARENT ; + init.flags =CLK_SET_RATE_PARENT ;/* INTC-SYS is the module clock of the GIC, and must not be disabled */ if (!strcmp (name,"intc-sys" )) {pr_debug ("MSTP %s setting CLK_IS_CRITICAL\n" , name);
drivers/clk/renesas/rcar-gen3-cpg.c +1 -1
@@ -381,7 +381,7 @@ static struct clk * __init cpg_sd_clk_register(const struct cpg_core_clk *core, init.name = core->name; init.ops = &cpg_sd_clock_ops; - init.flags =CLK_IS_BASIC |CLK_SET_RATE_PARENT ; + init.flags =CLK_SET_RATE_PARENT ; init.parent_names = &parent_name; init.num_parents =1 ;
drivers/clk/renesas/renesas-cpg-mssr.c +1 -1
@@ -377,7 +377,7 @@ static void __init cpg_mssr_register_mod_clk(const struct mssr_mod_clk *mod, init.name = mod->name; init.ops = &cpg_mstp_clock_ops; - init.flags =CLK_IS_BASIC |CLK_SET_RATE_PARENT ; + init.flags =CLK_SET_RATE_PARENT ;for (i =0 ; i < info->num_crit_mod_clks; i++)if (id == info->crit_mod_clks[i]) { dev_dbg(dev, "MSTP %s setting CLK_IS_CRITICAL\n",
Signature · 1 line
2.7.4
PATCH 6/23 clk: renesas: r8a774a1: Add missing CANFD clock
In reply to Biju DasFrom: Fabrizio Castro <[email protected]>
commit 9d034e151b407cbd2c66bc4c48b423f814533374 upstream.
This patch adds the missing CANFD clock to the r8a774a1 specific clock driver.
--- drivers/clk/renesas/r8a774a1-cpg-mssr.c | 2 ++ include/dt-bindings/clock/r8a774a1-cpg-mssr.h | 1 + 2 files changed, 3 insertions(+)
drivers/clk/renesas/r8a774a1-cpg-mssr.c +2 -0
@@ -102,6 +102,7 @@ static const struct cpg_core_clk r8a774a1_core_clks[] __initconst = {DEF_FIXED ("cp" ,R8A774A1_CLK_CP ,CLK_EXTAL ,2 ,1 ),DEF_FIXED ("cpex" ,R8A774A1_CLK_CPEX ,CLK_EXTAL ,2 ,1 ), +DEF_DIV6P1 ("canfd" ,R8A774A1_CLK_CANFD ,CLK_PLL1_DIV4 ,0x244 ),DEF_DIV6P1 ("csi0" ,R8A774A1_CLK_CSI0 ,CLK_PLL1_DIV4 ,0x00c ),DEF_DIV6P1 ("mso" ,R8A774A1_CLK_MSO ,CLK_PLL1_DIV4 ,0x014 ), DEF_DIV6P1("hdmi", R8A774A1_CLK_HDMI, CLK_PLL1_DIV4, 0x250),
@@ -191,6 +192,7 @@ static const struct mssr_mod_clk r8a774a1_mod_clks[] __initconst = {DEF_MOD ("gpio2" ,910 ,R8A774A1_CLK_S3D4 ),DEF_MOD ("gpio1" ,911 ,R8A774A1_CLK_S3D4 ),DEF_MOD ("gpio0" ,912 ,R8A774A1_CLK_S3D4 ), +DEF_MOD ("can-fd" ,914 ,R8A774A1_CLK_S3D2 ),DEF_MOD ("can-if1" ,915 ,R8A774A1_CLK_S3D4 ),DEF_MOD ("can-if0" ,916 ,R8A774A1_CLK_S3D4 ), DEF_MOD("i2c6", 918, R8A774A1_CLK_S0D6),
include/dt-bindings/clock/r8a774a1-cpg-mssr.h +1 -0
@@ -54,5 +54,6 @@#define R8A774A1_CLK_CPEX 43#define R8A774A1_CLK_R 44#define R8A774A1_CLK_OSC 45 +#define R8A774A1_CLK_CANFD 46#endif /* __DT_BINDINGS_CLOCK_R8A774A1_CPG_MSSR_H__ */
Signature · 1 line
2.7.4
PATCH 7/23 clk: renesas: rcar-gen3: Factor out cpg_reg_modify()
In reply to Biju DasFrom: Sergei Shtylyov <[email protected]>
commit 8cb8f16c62e5ea9c77ca7d25af761f4eaea670ba upstream.
There's quite often repeated sequence of a CPG register read-modify-write, so it seems worth factoring it out into a function -- this saves 68 bytes of the object code (AArch64 gcc 4.8.5) and simplifies protecting all such sequences with a spinlock in the next patch...
--- drivers/clk/renesas/rcar-gen3-cpg.c | 38 +++++++++++++++++++------------------ 1 file changed, 20 insertions(+), 18 deletions(-)
drivers/clk/renesas/rcar-gen3-cpg.c +20 -18
@@ -33,6 +33,16 @@#define CPG_RCKCR_CKSEL BIT(15)/* RCLK Clock Source Select */ +static void cpg_reg_modify (void __iomem *reg,u32 clear,u32 set) +{ +u32 val; + + val =readl (reg); + val &= ~clear; + val |= set; +writel (val, reg); +}; +struct cpg_simple_notifier {struct notifier_block nb;void __iomem *reg;
@@ -121,7 +131,6 @@ static int cpg_z_clk_set_rate(struct clk_hw *hw, unsigned long rate,struct cpg_z_clk *zclk =to_z_clk (hw);unsigned int mult;unsigned int i; -u32 val, kick;/* Factor of 2 is for fixed divider */ mult =DIV_ROUND_CLOSEST_ULL (rate *32ULL *2 , parent_rate);
@@ -130,17 +139,14 @@ static int cpg_z_clk_set_rate(struct clk_hw *hw, unsigned long rate,if (readl (zclk->kick_reg) &CPG_FRQCRB_KICK )return -EBUSY ; - val =readl (zclk->reg) & ~zclk->mask; - val |= ((32 - mult) <<__ffs (zclk->mask)) & zclk->mask; -writel (val, zclk->reg); +cpg_reg_modify (zclk->reg, zclk->mask, + ((32 - mult) <<__ffs (zclk->mask)) & zclk->mask);/* * Set KICK bit in FRQCRB to update hardware setting and wait for * clock change completion. */ - kick =readl (zclk->kick_reg); - kick |=CPG_FRQCRB_KICK ; -writel (kick, zclk->kick_reg); +cpg_reg_modify (zclk->kick_reg,0 ,CPG_FRQCRB_KICK );/* * Note: There is no HW information about the worst case latency.
@@ -269,12 +275,10 @@ static const struct sd_div_table cpg_sd_div_table[] = {static int cpg_sd_clock_enable (struct clk_hw *hw) {struct sd_clock *clock =to_sd_clock (hw); -u32 val =readl (clock->csn.reg); - val &= ~(CPG_SD_STP_MASK ); - val |= clock->div_table[clock->cur_div_idx].val &CPG_SD_STP_MASK ; - -writel (val, clock->csn.reg); +cpg_reg_modify (clock->csn.reg,CPG_SD_STP_MASK , + clock->div_table[clock->cur_div_idx].val & +CPG_SD_STP_MASK );return 0 ; }
@@ -283,7 +287,7 @@ static void cpg_sd_clock_disable(struct clk_hw *hw) {struct sd_clock *clock =to_sd_clock (hw); -writel (readl (clock->csn.reg) |CPG_SD_STP_MASK , clock->csn.reg); +cpg_reg_modify (clock->csn.reg,0 ,CPG_SD_STP_MASK ); }static int cpg_sd_clock_is_enabled (struct clk_hw *hw)
@@ -330,7 +334,6 @@ static int cpg_sd_clock_set_rate(struct clk_hw *hw, unsigned long rate, {struct sd_clock *clock =to_sd_clock (hw);unsigned int div =cpg_sd_clock_calc_div (clock, rate, parent_rate); -u32 val;unsigned int i;for (i =0 ; i < clock->div_num; i++)
@@ -342,10 +345,9 @@ static int cpg_sd_clock_set_rate(struct clk_hw *hw, unsigned long rate, clock->cur_div_idx = i; - val =readl (clock->csn.reg); - val &= ~(CPG_SD_STP_MASK |CPG_SD_FC_MASK ); - val |= clock->div_table[i].val & (CPG_SD_STP_MASK |CPG_SD_FC_MASK ); -writel (val, clock->csn.reg); +cpg_reg_modify (clock->csn.reg,CPG_SD_STP_MASK |CPG_SD_FC_MASK , + clock->div_table[i].val & + (CPG_SD_STP_MASK |CPG_SD_FC_MASK ));return 0 ; }
Signature · 1 line
2.7.4
PATCH 8/23 clk: renesas: rcar-gen3: Add spinlock
In reply to Biju DasFrom: Sergei Shtylyov <[email protected]>
commit 875e8f6b0156c0ad56fd0c29c78e3f2f67ec0b16 upstream.
Protect the CPG register read-modify-write sequence with a spinlock.
--- drivers/clk/renesas/rcar-gen3-cpg.c | 8 ++++++++ 1 file changed, 8 insertions(+)
drivers/clk/renesas/rcar-gen3-cpg.c +8 -0
@@ -33,14 +33,19 @@#define CPG_RCKCR_CKSEL BIT(15)/* RCLK Clock Source Select */ +static spinlock_t cpg_lock; +static void cpg_reg_modify (void __iomem *reg,u32 clear,u32 set) { +unsigned long flags;u32 val; +spin_lock_irqsave (&cpg_lock, flags); val =readl (reg); val &= ~clear; val |= set;writel (val, reg); +spin_unlock_irqrestore (&cpg_lock, flags); };struct cpg_simple_notifier {
@@ -618,5 +623,8 @@ int __init rcar_gen3_cpg_init(const struct rcar_gen3_cpg_pll_config *config,if (attr) cpg_quirks = (uintptr_t )attr->data;pr_debug ("%s: mode = 0x%x quirks = 0x%x\n" , __func__, mode, cpg_quirks); + +spin_lock_init (&cpg_lock); +return 0 ; }
Signature · 1 line
2.7.4
PATCH 8/23 clk: renesas: rcar-gen3: Add spinlock
Hi!
Quoted 14 lines
commit
875e8f6b0156c0ad56fd0c29c78e3f2f67ec0b16upstream.Protect the CPG register read-modify-write sequence with a spinlock.
Signed-off-by Sergei Shtylyov <[email protected]>Signed-off-by Geert Uytterhoeven <[email protected]>Signed-off-by Biju Das <[email protected]>drivers/clk/renesas/rcar-gen3-cpg.c +0
-0
drivers/clk/renesas/rcar-gen3-cpg.c line 37
Quoted 5 lines
drivers/clk/renesas/rcar-gen3-cpg.c +2
-0@@ -33,14 +33,19 @@#define CPG_RCKCR_CKSEL BIT(15)/* RCLK Clock Source Select */ +static spinlock_t cpg_lock; +
This is a bit unusual. I'd expect the the lock to be in data structure describing the hardware... but maybe the hardware abstraction here is so simple that we can get away with this.
Quoted 4 lines
drivers/clk/renesas/rcar-gen3-cpg.c +1
-0static void cpg_reg_modify (void __iomem *reg,u32 clear,u32 set) { +unsigned long flags;u32 val;
drivers/clk/renesas/rcar-gen3-cpg.c line 51
Quoted 10 lines
drivers/clk/renesas/rcar-gen3-cpg.c +2
-0+spin_lock_irqsave (&cpg_lock, flags); val =readl (reg); val &= ~clear; val |= set;writel (val, reg); +spin_unlock_irqrestore (&cpg_lock, flags); };struct cpg_simple_notifier {
Best regards,
Pavel
Signature · 9 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 181 bytes Desc: Digital signature URL: <http://lists.cip-project.org/pipermail/cip-dev/attachments/20190716/d303a019/attachment.sig>
PATCH 9/23 clk: renesas: r8a774a1: Fix LAST_DT_CORE_CLK
In reply to Biju DasFrom: Fabrizio Castro <[email protected]>
commit df446f7e6ec0ed474dab2e6f19e4618116907f29 upstream.
Enum LAST_DT_CORE_CLK needs updating as R8A774A1_CLK_CANFD was recently added and it's the core clock with the highest index.
--- drivers/clk/renesas/r8a774a1-cpg-mssr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clk/renesas/r8a774a1-cpg-mssr.c +1 -1
@@ -21,7 +21,7 @@enum clk_ids {/* Core Clock Outputs exported to DT */ -LAST_DT_CORE_CLK =R8A774A1_CLK_OSC , +LAST_DT_CORE_CLK =R8A774A1_CLK_CANFD ,/* External Input Clocks */ CLK_EXTAL ,
Signature · 1 line
2.7.4
PATCH 10/23 clk: renesas: rcar-gen3: Pass name/offset to cpg_sd_clk_register()
In reply to Biju DasFrom: Geert Uytterhoeven <[email protected]>
commit 6a82559f745bc26d2e4974c1d26014ef7fa14794 upstream.
Explicitly pass the clock's name and register offset to cpg_sd_clk_register(), so the latter doesn't have to extract them from the cpg_core_clk object.
This keeps all cpg_core_clk parsing and unmarshalling contained in a single function (rcar_gen3_cpg_clk_register()).
--- drivers/clk/renesas/rcar-gen3-cpg.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/clk/renesas/rcar-gen3-cpg.c +6 -6
@@ -372,8 +372,8 @@ static u32 cpg_quirks __initdata;#define RCKCR_CKSEL BIT(1)/* Manual RCLK parent selection */ #define SD_SKIP_FIRST BIT(2)/* Skip first clock in SD table */ -static struct clk *__init cpg_sd_clk_register (const struct cpg_core_clk *core, -void __iomem *base,const char *parent_name, +static struct clk *__init cpg_sd_clk_register (const char *name, +void __iomem *base,unsigned int offset,const char *parent_name,struct raw_notifier_head *notifiers) {struct clk_init_data init;
@@ -386,13 +386,13 @@ static struct clk * __init cpg_sd_clk_register(const struct cpg_core_clk *core,if (!clock)return ERR_PTR (-ENOMEM ); - init.name = core->name; + init.name = name; init.ops = &cpg_sd_clock_ops; init.flags =CLK_SET_RATE_PARENT ; init.parent_names = &parent_name; init.num_parents =1 ; - clock->csn.reg = base + core->offset; + clock->csn.reg = base + offset; clock->hw.init = &init; clock->div_table = cpg_sd_div_table; clock->div_num =ARRAY_SIZE (cpg_sd_div_table);
@@ -523,8 +523,8 @@ struct clk * __init rcar_gen3_cpg_clk_register(struct device *dev,break ;case CLK_TYPE_GEN3_SD : -return cpg_sd_clk_register (core, base,__clk_get_name (parent), - notifiers); +return cpg_sd_clk_register (core->name, base, core->offset, +__clk_get_name (parent), notifiers);case CLK_TYPE_GEN3_R :if (cpg_quirks &RCKCR_CKSEL ) {
Signature · 1 line
2.7.4
PATCH 11/23 clk: renesas: rcar-gen3: Parameterise Z and Z2 clock fixed divisor
In reply to Biju Dascommit 20cc05ba04a93f05d6c50789fe35d762a2db4e96 upstream.
Parameterise Z and Z2 clock fixed divisor to allow clocks with a fixed divisor other than 2, the value used by all such clocks supported to date.
This is in preparation for supporting the Z2 clock on the R-Car E3 (r8a77990) SoC which has a fixed divisor of 4.
--- drivers/clk/renesas/r8a774a1-cpg-mssr.c | 4 ++-- drivers/clk/renesas/r8a7795-cpg-mssr.c | 5 +++-- drivers/clk/renesas/r8a7796-cpg-mssr.c | 5 +++-- drivers/clk/renesas/r8a77965-cpg-mssr.c | 2 +- drivers/clk/renesas/rcar-gen3-cpg.c | 24 +++++++++++++++--------- drivers/clk/renesas/rcar-gen3-cpg.h | 4 ++++ 6 files changed, 28 insertions(+), 16 deletions(-)
drivers/clk/renesas/r8a774a1-cpg-mssr.c +2 -2
@@ -71,8 +71,8 @@ static const struct cpg_core_clk r8a774a1_core_clks[] __initconst = {DEF_GEN3_OSC (".r" ,CLK_RINT ,CLK_EXTAL ,32 ),/* Core Clock Outputs */ -DEF_BASE ("z" ,R8A774A1_CLK_Z ,CLK_TYPE_GEN3_Z ,CLK_PLL0 ), -DEF_BASE ("z2" ,R8A774A1_CLK_Z2 ,CLK_TYPE_GEN3_Z2 ,CLK_PLL2 ), +DEF_GEN3_Z ("z" ,R8A774A1_CLK_Z ,CLK_TYPE_GEN3_Z ,CLK_PLL0 ,2 ), +DEF_GEN3_Z ("z2" ,R8A774A1_CLK_Z2 ,CLK_TYPE_GEN3_Z2 ,CLK_PLL2 ,2 ),DEF_FIXED ("ztr" ,R8A774A1_CLK_ZTR ,CLK_PLL1_DIV2 ,6 ,1 ),DEF_FIXED ("ztrd2" ,R8A774A1_CLK_ZTRD2 ,CLK_PLL1_DIV2 ,12 ,1 ), DEF_FIXED("zt", R8A774A1_CLK_ZT, CLK_PLL1_DIV2, 4, 1),
drivers/clk/renesas/r8a7795-cpg-mssr.c +3 -2
@@ -2,6 +2,7 @@* r8a7795 Clock Pulse Generator / Module Standby and Software Reset * * Copyright (C) 2015 Glider bvba +* Copyright (C) 2018 Renesas Electronics Corp. * * Based on clk-rcar-gen3.c *
@@ -74,8 +75,8 @@ static struct cpg_core_clk r8a7795_core_clks[] __initdata = {DEF_FIXED (".sdsrc" ,CLK_SDSRC ,CLK_PLL1_DIV2 ,2 ,1 ),/* Core Clock Outputs */ -DEF_BASE ("z" ,R8A7795_CLK_Z ,CLK_TYPE_GEN3_Z ,CLK_PLL0 ), -DEF_BASE ("z2" ,R8A7795_CLK_Z2 ,CLK_TYPE_GEN3_Z2 ,CLK_PLL2 ), +DEF_GEN3_Z ("z" ,R8A7795_CLK_Z ,CLK_TYPE_GEN3_Z ,CLK_PLL0 ,2 ), +DEF_GEN3_Z ("z2" ,R8A7795_CLK_Z2 ,CLK_TYPE_GEN3_Z2 ,CLK_PLL2 ,2 ),DEF_FIXED ("ztr" ,R8A7795_CLK_ZTR ,CLK_PLL1_DIV2 ,6 ,1 ),DEF_FIXED ("ztrd2" ,R8A7795_CLK_ZTRD2 ,CLK_PLL1_DIV2 ,12 ,1 ), DEF_FIXED("zt", R8A7795_CLK_ZT, CLK_PLL1_DIV2, 4, 1),
drivers/clk/renesas/r8a7796-cpg-mssr.c +3 -2
@@ -2,6 +2,7 @@* r8a7796 Clock Pulse Generator / Module Standby and Software Reset * * Copyright (C) 2016 Glider bvba +* Copyright (C) 2018 Renesas Electronics Corp. * * Based on r8a7795-cpg-mssr.c *
@@ -74,8 +75,8 @@ static const struct cpg_core_clk r8a7796_core_clks[] __initconst = {DEF_FIXED (".sdsrc" ,CLK_SDSRC ,CLK_PLL1_DIV2 ,2 ,1 ),/* Core Clock Outputs */ -DEF_BASE ("z" ,R8A7796_CLK_Z ,CLK_TYPE_GEN3_Z ,CLK_PLL0 ), -DEF_BASE ("z2" ,R8A7796_CLK_Z2 ,CLK_TYPE_GEN3_Z2 ,CLK_PLL2 ), +DEF_GEN3_Z ("z" ,R8A7796_CLK_Z ,CLK_TYPE_GEN3_Z ,CLK_PLL0 ,2 ), +DEF_GEN3_Z ("z2" ,R8A7796_CLK_Z2 ,CLK_TYPE_GEN3_Z2 ,CLK_PLL2 ,2 ),DEF_FIXED ("ztr" ,R8A7796_CLK_ZTR ,CLK_PLL1_DIV2 ,6 ,1 ),DEF_FIXED ("ztrd2" ,R8A7796_CLK_ZTRD2 ,CLK_PLL1_DIV2 ,12 ,1 ), DEF_FIXED("zt", R8A7796_CLK_ZT, CLK_PLL1_DIV2, 4, 1),
drivers/clk/renesas/r8a77965-cpg-mssr.c +1 -1
@@ -69,7 +69,7 @@ static const struct cpg_core_clk r8a77965_core_clks[] __initconst = {DEF_FIXED (".sdsrc" ,CLK_SDSRC ,CLK_PLL1_DIV2 ,2 ,1 ),/* Core Clock Outputs */ -DEF_BASE ("z" ,R8A77965_CLK_Z ,CLK_TYPE_GEN3_Z ,CLK_PLL0 ), +DEF_GEN3_Z ("z" ,R8A77965_CLK_Z ,CLK_TYPE_GEN3_Z ,CLK_PLL0 ,2 ),DEF_FIXED ("ztr" ,R8A77965_CLK_ZTR ,CLK_PLL1_DIV2 ,6 ,1 ),DEF_FIXED ("ztrd2" ,R8A77965_CLK_ZTRD2 ,CLK_PLL1_DIV2 ,12 ,1 ), DEF_FIXED("zt", R8A77965_CLK_ZT, CLK_PLL1_DIV2, 4, 1),
drivers/clk/renesas/rcar-gen3-cpg.c +15 -9
@@ -99,6 +99,7 @@ struct cpg_z_clk {void __iomem *reg;void __iomem *kick_reg;unsigned long mask; +unsigned int fixed_div; };#define to_z_clk (_hw) container_of(_hw, struct cpg_z_clk, hw)
@@ -113,17 +114,18 @@ static unsigned long cpg_z_clk_recalc_rate(struct clk_hw *hw, val =readl (zclk->reg) & zclk->mask; mult =32 - (val >>__ffs (zclk->mask)); -/* Factor of 2 is for fixed divider */ -return DIV_ROUND_CLOSEST_ULL ((u64 )parent_rate * mult,32 *2 ); +return DIV_ROUND_CLOSEST_ULL ((u64 )parent_rate * mult, +32 * zclk->fixed_div); }static long cpg_z_clk_round_rate (struct clk_hw *hw,unsigned long rate,unsigned long *parent_rate) { -/* Factor of 2 is for fixed divider */ -unsigned long prate = *parent_rate /2 ; +struct cpg_z_clk *zclk =to_z_clk (hw); +unsigned long prate;unsigned int mult; + prate = *parent_rate / zclk->fixed_div; mult =div_u64 (rate *32ULL , prate); mult =clamp (mult,1U ,32U );
@@ -137,8 +139,8 @@ static int cpg_z_clk_set_rate(struct clk_hw *hw, unsigned long rate,unsigned int mult;unsigned int i; -/* Factor of 2 is for fixed divider */ - mult =DIV_ROUND_CLOSEST_ULL (rate *32ULL *2 , parent_rate); + mult =DIV_ROUND_CLOSEST_ULL (rate *32ULL * zclk->fixed_div, + parent_rate); mult =clamp (mult,1U ,32U );if (readl (zclk->kick_reg) &CPG_FRQCRB_KICK )
@@ -181,7 +183,8 @@ static const struct clk_ops cpg_z_clk_ops = {static struct clk *__init cpg_z_clk_register (const char *name,const char *parent_name,void __iomem *reg, -unsigned long mask) +unsigned long mask, +unsigned int div) {struct clk_init_data init;struct cpg_z_clk *zclk;
@@ -201,6 +204,7 @@ static struct clk * __init cpg_z_clk_register(const char *name, zclk->kick_reg = reg +CPG_FRQCRB ; zclk->hw.init = &init; zclk->mask = mask; + zclk->fixed_div = div;/* PLLVCO x 1/div x SYS-CPU divider */ clk =clk_register (NULL , &zclk->hw);if (IS_ERR (clk))
@@ -575,11 +579,13 @@ struct clk * __init rcar_gen3_cpg_clk_register(struct device *dev,case CLK_TYPE_GEN3_Z :return cpg_z_clk_register (core->name,__clk_get_name (parent), - base,CPG_FRQCRC_ZFC_MASK ); + base,CPG_FRQCRC_ZFC_MASK , + core->div);case CLK_TYPE_GEN3_Z2 :return cpg_z_clk_register (core->name,__clk_get_name (parent), - base,CPG_FRQCRC_Z2FC_MASK ); + base,CPG_FRQCRC_Z2FC_MASK , + core->div);case CLK_TYPE_GEN3_OSC :/*
drivers/clk/renesas/rcar-gen3-cpg.h +4 -0
@@ -2,6 +2,7 @@* R-Car Gen3 Clock Pulse Generator * * Copyright (C) 2015-2018 Glider bvba +* Copyright (C) 2018 Renesas Electronics Corp. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by
@@ -47,6 +48,9 @@ enum rcar_gen3_clk_types {DEF_BASE (_name, _id,CLK_TYPE_GEN3_RCKSEL , \ (_parent0) << 16 | (_parent1), .div = (_div0) << 16 | (_div1)) +#define DEF_GEN3_Z (_name, _id, _type, _parent, _div) \ + DEF_BASE(_name, _id, _type, _parent, .div = _div) +struct rcar_gen3_cpg_pll_config {u8 extal_div;u8 pll1_mult;
Signature · 1 line
2.7.4
PATCH 12/23 clk: renesas: rcar-gen3: Parameterise Z and Z2 clock offset
In reply to Biju Dascommit 10d9ea5100c89afd677a202036e0e34e129a6c52 upstream.
Parameterise the offset of control bits within the FRQCRC register for Z and Z2 clocks.
This is in preparation for supporting the Z2 clock on the R-Car E3 (r8a77990) SoC which uses a different offset for control bits to other, already, supported SoCs.
As suggested by Geert Uytterhoeven.
--- drivers/clk/renesas/r8a774a1-cpg-mssr.c | 4 ++-- drivers/clk/renesas/r8a7795-cpg-mssr.c | 4 ++-- drivers/clk/renesas/r8a7796-cpg-mssr.c | 4 ++-- drivers/clk/renesas/r8a77965-cpg-mssr.c | 2 +- drivers/clk/renesas/rcar-gen3-cpg.c | 15 ++++----------- drivers/clk/renesas/rcar-gen3-cpg.h | 4 ++-- 6 files changed, 13 insertions(+), 20 deletions(-)
drivers/clk/renesas/r8a774a1-cpg-mssr.c +2 -2
@@ -71,8 +71,8 @@ static const struct cpg_core_clk r8a774a1_core_clks[] __initconst = {DEF_GEN3_OSC (".r" ,CLK_RINT ,CLK_EXTAL ,32 ),/* Core Clock Outputs */ -DEF_GEN3_Z ("z" ,R8A774A1_CLK_Z ,CLK_TYPE_GEN3_Z ,CLK_PLL0 ,2 ), -DEF_GEN3_Z ("z2" ,R8A774A1_CLK_Z2 ,CLK_TYPE_GEN3_Z2 ,CLK_PLL2 ,2 ), +DEF_GEN3_Z ("z" ,R8A774A1_CLK_Z ,CLK_TYPE_GEN3_Z ,CLK_PLL0 ,2 ,8 ), +DEF_GEN3_Z ("z2" ,R8A774A1_CLK_Z2 ,CLK_TYPE_GEN3_Z2 ,CLK_PLL2 ,2 ,0 ),DEF_FIXED ("ztr" ,R8A774A1_CLK_ZTR ,CLK_PLL1_DIV2 ,6 ,1 ),DEF_FIXED ("ztrd2" ,R8A774A1_CLK_ZTRD2 ,CLK_PLL1_DIV2 ,12 ,1 ), DEF_FIXED("zt", R8A774A1_CLK_ZT, CLK_PLL1_DIV2, 4, 1),
drivers/clk/renesas/r8a7795-cpg-mssr.c +2 -2
@@ -75,8 +75,8 @@ static struct cpg_core_clk r8a7795_core_clks[] __initdata = {DEF_FIXED (".sdsrc" ,CLK_SDSRC ,CLK_PLL1_DIV2 ,2 ,1 ),/* Core Clock Outputs */ -DEF_GEN3_Z ("z" ,R8A7795_CLK_Z ,CLK_TYPE_GEN3_Z ,CLK_PLL0 ,2 ), -DEF_GEN3_Z ("z2" ,R8A7795_CLK_Z2 ,CLK_TYPE_GEN3_Z2 ,CLK_PLL2 ,2 ), +DEF_GEN3_Z ("z" ,R8A7795_CLK_Z ,CLK_TYPE_GEN3_Z ,CLK_PLL0 ,2 ,8 ), +DEF_GEN3_Z ("z2" ,R8A7795_CLK_Z2 ,CLK_TYPE_GEN3_Z2 ,CLK_PLL2 ,2 ,0 ),DEF_FIXED ("ztr" ,R8A7795_CLK_ZTR ,CLK_PLL1_DIV2 ,6 ,1 ),DEF_FIXED ("ztrd2" ,R8A7795_CLK_ZTRD2 ,CLK_PLL1_DIV2 ,12 ,1 ), DEF_FIXED("zt", R8A7795_CLK_ZT, CLK_PLL1_DIV2, 4, 1),
drivers/clk/renesas/r8a7796-cpg-mssr.c +2 -2
@@ -75,8 +75,8 @@ static const struct cpg_core_clk r8a7796_core_clks[] __initconst = {DEF_FIXED (".sdsrc" ,CLK_SDSRC ,CLK_PLL1_DIV2 ,2 ,1 ),/* Core Clock Outputs */ -DEF_GEN3_Z ("z" ,R8A7796_CLK_Z ,CLK_TYPE_GEN3_Z ,CLK_PLL0 ,2 ), -DEF_GEN3_Z ("z2" ,R8A7796_CLK_Z2 ,CLK_TYPE_GEN3_Z2 ,CLK_PLL2 ,2 ), +DEF_GEN3_Z ("z" ,R8A7796_CLK_Z ,CLK_TYPE_GEN3_Z ,CLK_PLL0 ,2 ,8 ), +DEF_GEN3_Z ("z2" ,R8A7796_CLK_Z2 ,CLK_TYPE_GEN3_Z2 ,CLK_PLL2 ,2 ,0 ),DEF_FIXED ("ztr" ,R8A7796_CLK_ZTR ,CLK_PLL1_DIV2 ,6 ,1 ),DEF_FIXED ("ztrd2" ,R8A7796_CLK_ZTRD2 ,CLK_PLL1_DIV2 ,12 ,1 ), DEF_FIXED("zt", R8A7796_CLK_ZT, CLK_PLL1_DIV2, 4, 1),
drivers/clk/renesas/r8a77965-cpg-mssr.c +1 -1
@@ -69,7 +69,7 @@ static const struct cpg_core_clk r8a77965_core_clks[] __initconst = {DEF_FIXED (".sdsrc" ,CLK_SDSRC ,CLK_PLL1_DIV2 ,2 ,1 ),/* Core Clock Outputs */ -DEF_GEN3_Z ("z" ,R8A77965_CLK_Z ,CLK_TYPE_GEN3_Z ,CLK_PLL0 ,2 ), +DEF_GEN3_Z ("z" ,R8A77965_CLK_Z ,CLK_TYPE_GEN3_Z ,CLK_PLL0 ,2 ,8 ),DEF_FIXED ("ztr" ,R8A77965_CLK_ZTR ,CLK_PLL1_DIV2 ,6 ,1 ),DEF_FIXED ("ztrd2" ,R8A77965_CLK_ZTRD2 ,CLK_PLL1_DIV2 ,12 ,1 ), DEF_FIXED("zt", R8A77965_CLK_ZT, CLK_PLL1_DIV2, 4, 1),
drivers/clk/renesas/rcar-gen3-cpg.c +4 -11
@@ -91,8 +91,6 @@ static void cpg_simple_notifier_register(struct raw_notifier_head *notifiers,#define CPG_FRQCRB 0x00000004#define CPG_FRQCRB_KICK BIT(31)#define CPG_FRQCRC 0x000000e0 -#define CPG_FRQCRC_ZFC_MASK GENMASK(12, 8) -#define CPG_FRQCRC_Z2FC_MASK GENMASK(4, 0)struct cpg_z_clk {struct clk_hw hw;
@@ -183,8 +181,8 @@ static const struct clk_ops cpg_z_clk_ops = {static struct clk *__init cpg_z_clk_register (const char *name,const char *parent_name,void __iomem *reg, -unsigned long mask, -unsigned int div) +unsigned int div, +unsigned int offset) {struct clk_init_data init;struct cpg_z_clk *zclk;
@@ -203,7 +201,7 @@ static struct clk * __init cpg_z_clk_register(const char *name, zclk->reg = reg +CPG_FRQCRC ; zclk->kick_reg = reg +CPG_FRQCRB ; zclk->hw.init = &init; - zclk->mask = mask; + zclk->mask =GENMASK (offset +4 , offset); zclk->fixed_div = div;/* PLLVCO x 1/div x SYS-CPU divider */ clk =clk_register (NULL , &zclk->hw);
@@ -578,14 +576,9 @@ struct clk * __init rcar_gen3_cpg_clk_register(struct device *dev,break ;case CLK_TYPE_GEN3_Z : -return cpg_z_clk_register (core->name,__clk_get_name (parent), - base,CPG_FRQCRC_ZFC_MASK , - core->div); -case CLK_TYPE_GEN3_Z2 :return cpg_z_clk_register (core->name,__clk_get_name (parent), - base,CPG_FRQCRC_Z2FC_MASK , - core->div); + base, core->div, core->offset);case CLK_TYPE_GEN3_OSC :/*
drivers/clk/renesas/rcar-gen3-cpg.h +2 -2
@@ -48,8 +48,8 @@ enum rcar_gen3_clk_types {DEF_BASE (_name, _id,CLK_TYPE_GEN3_RCKSEL , \ (_parent0) << 16 | (_parent1), .div = (_div0) << 16 | (_div1)) -#define DEF_GEN3_Z (_name, _id, _type, _parent, _div) \ - DEF_BASE(_name, _id, _type, _parent, .div = _div) +#define DEF_GEN3_Z (_name, _id, _type, _parent, _div, _offset) \ + DEF_BASE(_name, _id, _type, _parent, .div = _div, .offset = _offset)struct rcar_gen3_cpg_pll_config {u8 extal_div;
Signature · 1 line
2.7.4
PATCH 13/23 clk: renesas: rcar-gen3: Remove CLK_TYPE_GEN3_Z2
In reply to Biju DasFrom: Simon Horman <[email protected]>
commit e0836e36384321ab1b4af05ab441c0c59a972596 upstream.
After recent reworking of Z and Z2 clk handling CLK_TYPE_GEN3_Z and CLK_TYPE_GEN3_Z2 have come to have precisely the same meaning. Remove this redundancy by eliminating the latter.
This is not expected to have any run-time effect.
As suggested by Geert Uytterhoeven.
--- drivers/clk/renesas/r8a774a1-cpg-mssr.c | 2 +- drivers/clk/renesas/r8a7795-cpg-mssr.c | 2 +- drivers/clk/renesas/r8a7796-cpg-mssr.c | 2 +- drivers/clk/renesas/rcar-gen3-cpg.c | 1 - drivers/clk/renesas/rcar-gen3-cpg.h | 1 - 5 files changed, 3 insertions(+), 5 deletions(-)
drivers/clk/renesas/r8a774a1-cpg-mssr.c +1 -1
@@ -72,7 +72,7 @@ static const struct cpg_core_clk r8a774a1_core_clks[] __initconst = {/* Core Clock Outputs */ DEF_GEN3_Z ("z" ,R8A774A1_CLK_Z ,CLK_TYPE_GEN3_Z ,CLK_PLL0 ,2 ,8 ), -DEF_GEN3_Z ("z2" ,R8A774A1_CLK_Z2 ,CLK_TYPE_GEN3_Z2 ,CLK_PLL2 ,2 ,0 ), +DEF_GEN3_Z ("z2" ,R8A774A1_CLK_Z2 ,CLK_TYPE_GEN3_Z ,CLK_PLL2 ,2 ,0 ),DEF_FIXED ("ztr" ,R8A774A1_CLK_ZTR ,CLK_PLL1_DIV2 ,6 ,1 ),DEF_FIXED ("ztrd2" ,R8A774A1_CLK_ZTRD2 ,CLK_PLL1_DIV2 ,12 ,1 ), DEF_FIXED("zt", R8A774A1_CLK_ZT, CLK_PLL1_DIV2, 4, 1),
drivers/clk/renesas/r8a7795-cpg-mssr.c +1 -1
@@ -76,7 +76,7 @@ static struct cpg_core_clk r8a7795_core_clks[] __initdata = {/* Core Clock Outputs */ DEF_GEN3_Z ("z" ,R8A7795_CLK_Z ,CLK_TYPE_GEN3_Z ,CLK_PLL0 ,2 ,8 ), -DEF_GEN3_Z ("z2" ,R8A7795_CLK_Z2 ,CLK_TYPE_GEN3_Z2 ,CLK_PLL2 ,2 ,0 ), +DEF_GEN3_Z ("z2" ,R8A7795_CLK_Z2 ,CLK_TYPE_GEN3_Z ,CLK_PLL2 ,2 ,0 ),DEF_FIXED ("ztr" ,R8A7795_CLK_ZTR ,CLK_PLL1_DIV2 ,6 ,1 ),DEF_FIXED ("ztrd2" ,R8A7795_CLK_ZTRD2 ,CLK_PLL1_DIV2 ,12 ,1 ), DEF_FIXED("zt", R8A7795_CLK_ZT, CLK_PLL1_DIV2, 4, 1),
drivers/clk/renesas/r8a7796-cpg-mssr.c +1 -1
@@ -76,7 +76,7 @@ static const struct cpg_core_clk r8a7796_core_clks[] __initconst = {/* Core Clock Outputs */ DEF_GEN3_Z ("z" ,R8A7796_CLK_Z ,CLK_TYPE_GEN3_Z ,CLK_PLL0 ,2 ,8 ), -DEF_GEN3_Z ("z2" ,R8A7796_CLK_Z2 ,CLK_TYPE_GEN3_Z2 ,CLK_PLL2 ,2 ,0 ), +DEF_GEN3_Z ("z2" ,R8A7796_CLK_Z2 ,CLK_TYPE_GEN3_Z ,CLK_PLL2 ,2 ,0 ),DEF_FIXED ("ztr" ,R8A7796_CLK_ZTR ,CLK_PLL1_DIV2 ,6 ,1 ),DEF_FIXED ("ztrd2" ,R8A7796_CLK_ZTRD2 ,CLK_PLL1_DIV2 ,12 ,1 ), DEF_FIXED("zt", R8A7796_CLK_ZT, CLK_PLL1_DIV2, 4, 1),
drivers/clk/renesas/rcar-gen3-cpg.c +0 -1
@@ -576,7 +576,6 @@ struct clk * __init rcar_gen3_cpg_clk_register(struct device *dev,break ;case CLK_TYPE_GEN3_Z : -case CLK_TYPE_GEN3_Z2 :return cpg_z_clk_register (core->name,__clk_get_name (parent), base, core->div, core->offset);
drivers/clk/renesas/rcar-gen3-cpg.h +0 -1
@@ -23,7 +23,6 @@ enum rcar_gen3_clk_types {CLK_TYPE_GEN3_R ,CLK_TYPE_GEN3_MDSEL ,/* Select parent/divider using mode pin */ CLK_TYPE_GEN3_Z , -CLK_TYPE_GEN3_Z2 ,CLK_TYPE_GEN3_OSC ,/* OSC EXTAL predivider and fixed divider */ CLK_TYPE_GEN3_RCKSEL, /* Select parent/divider using RCKCR.CKSEL */ };
Signature · 1 line
2.7.4
PATCH 14/23 math64: New DIV64_U64_ROUND_CLOSEST helper
In reply to Biju DasFrom: Simon Horman <[email protected]>
commit cb8be119d21d8a0affc3598a928dd0baf5da238f upstream.
Provide DIV64_U64_ROUND_CLOSEST helper which performs division rounded to the closest integer using an unsigned 64bit dividend and divisor.
This will be used in a follow-up patch to allow calculation of clock divisors with high frequency parents in the R-Car Gen3 CPG MSSR driver where overflow occurs if either the dividend or divisor is 32bit.
--- include/linux/math64.h | 13 +++++++++++++ 1 file changed, 13 insertions(+)
include/linux/math64.h +13 -0
@@ -284,4 +284,17 @@ static inline u64 mul_u64_u32_div(u64 a, u32 mul, u32 divisor)#define DIV64_U64_ROUND_UP (ll, d) \ ({ u64 _tmp = (d); div64_u64((ll) + _tmp - 1, _tmp); }) +/** +* DIV64_U64_ROUND_CLOSEST - unsigned 64bit divide with 64bit divisor rounded to nearest integer +* @dividend: unsigned 64bit dividend +* @divisor: unsigned 64bit divisor +* +* Divide unsigned 64bit dividend by unsigned 64bit divisor +* and round to closest integer. +* +* Return: dividend / divisor rounded to nearest integer +*/ +#define DIV64_U64_ROUND_CLOSEST (dividend, divisor) \ + ({ u64 _tmp = (divisor); div64_u64((dividend) + _tmp / 2, _tmp); }) +#endif /* _LINUX_MATH64_H */
Signature · 1 line
2.7.4
PATCH 15/23 clk: renesas: rcar-gen3: Support Z and Z2 clocks with high frequency parents
In reply to Biju DasFrom: Simon Horman <[email protected]>
commit 71119b54a2e6d9345f22d9501c4d3c28b06f955a upstream.
Support Z and Z2 clocks with parent frequencies greater than UINT32_MAX Hz (~4.29GHz).
The DIV_ROUND_CLOSEST_ULL() macro accepts a 64bit dividend and 32bit divisor. This leads to truncation of the divisor, which is the Z or Z2 parent clock frequency in HZ, on platforms where frequency of that clock is greater than UINT32_MAX Hz.
To resolve this problem the DIV64_U64_ROUND_CLOSEST() macro, which takes on an unsigned 64bit dividend and divisor, is used.
An earlier version of this patch made use of the existing DIV_ROUND_CLOSEST() macro, which accepts the prevailing type of the dividend and divisor. However, this does not compile on 32bit systems, such as i386 and mips, when called with the types used at this call site, an unsigned long long dividend and unsigned long divisor.
This work is in preparation for supporting the Z2 clock on the R-Car Gen3 E3 (r8a77990) SoC which has a 4.8GHz parent clock.
--- drivers/clk/renesas/rcar-gen3-cpg.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/clk/renesas/rcar-gen3-cpg.c +2 -2
@@ -137,8 +137,8 @@ static int cpg_z_clk_set_rate(struct clk_hw *hw, unsigned long rate,unsigned int mult;unsigned int i; - mult =DIV_ROUND_CLOSEST_ULL (rate *32ULL * zclk->fixed_div, - parent_rate); + mult =DIV64_U64_ROUND_CLOSEST (rate *32ULL * zclk->fixed_div, + parent_rate); mult =clamp (mult,1U ,32U );if (readl (zclk->kick_reg) &CPG_FRQCRB_KICK )
Signature · 1 line
2.7.4
PATCH 15/23 clk: renesas: rcar-gen3: Support Z and Z2 clocks with high frequency parents
Hi!
Quoted 11 lines
Support Z and Z2 clocks with parent frequencies greater than
UINT32_MAXHz (~4.29GHz).The
DIV_ROUND_CLOSEST_ULL()macro accepts a 64bit dividend and 32bit divisor. This leads to truncation of the divisor, which is the Z or Z2 parent clock frequency in HZ, on platforms where frequency of that clock is greater thanUINT32_MAXHz.To resolve this problem the
DIV64_U64_ROUND_CLOSEST()macro, which takes on an unsigned 64bit dividend and divisor, is used.
Quoted 8 lines
An earlier version of this patch made use of the existing
DIV_ROUND_CLOSEST()macro, which accepts the prevailing type of the dividend and divisor. However, this does not compile on 32bit systems, such as i386 and mips, when called with the types used at this call site, an unsigned long long dividend and unsigned long divisor.This work is in preparation for supporting the Z2 clock on the R-Car Gen3 E3 (r8a77990) SoC which has a 4.8GHz parent clock.
You still store "parent_rate" in "unsigned long". That is going to overflow on 32-bit systems, right?
Best regards,
Pavel
Signature · 9 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 181 bytes Desc: Digital signature URL: <http://lists.cip-project.org/pipermail/cip-dev/attachments/20190716/6e2e8f98/attachment.sig>
PATCH 15/23 clk: renesas: rcar-gen3: Support Z and Z2 clocks with high frequency parents
Hi Pavel,
Thanks for the feedback.
Quoted 22 lines
Subject: Re: [cip-dev] [PATCH 4.19.y-cip 15/23] clk: renesas: rcar-gen3:
Support Z and Z2 clocks with high frequency parentsHi!
Quoted 16 lines
Support Z and Z2 clocks with parent frequencies greater than
UINT32_MAXHz (~4.29GHz).The
DIV_ROUND_CLOSEST_ULL()macro accepts a 64bit dividend and 32bit divisor. This leads to truncation of the divisor, which is the Z or Z2 parent clock frequency in HZ, on platforms where frequency of that clock is greater thanUINT32_MAXHz.To resolve this problem the
DIV64_U64_ROUND_CLOSEST()macro, which takes on an unsigned 64bit dividend and divisor, is used.An earlier version of this patch made use of the existing
DIV_ROUND_CLOSEST()macro, which accepts the prevailing type of the dividend and divisor. However, this does not compile on 32bit systems, such as i386 and mips, when called with the types used at this call site, an unsigned long long dividend and unsigned long divisor.
Quoted 5 lines
Quoted 2 lines
This work is in preparation for supporting the Z2 clock on the R-Car Gen3 E3 (r8a77990) SoC which has a 4.8GHz parent clock.
You still store "
parent_rate" in "unsigned long". That is going to overflow on 32-bit systems, right?
Gen3 SoC's are aarch64. So I think it is ok.
Regards,
Biju
PATCH 16/23 clk: renesas: r8a774c0: Add Z2 clock
In reply to Biju DasFrom: Simon Horman <[email protected]>
commit 4aeed945b7024e454bafb4beb68b8c0298832efb upstream.
Adds support for RZ/G2E (r8a774c0) Z2 clock.
--- drivers/clk/renesas/r8a774c0-cpg-mssr.c | 1 + 1 file changed, 1 insertion(+)
drivers/clk/renesas/r8a774c0-cpg-mssr.c +1 -0
@@ -81,6 +81,7 @@ static const struct cpg_core_clk r8a774c0_core_clks[] __initconst = {/* Core Clock Outputs */ DEF_FIXED ("za2" ,R8A774C0_CLK_ZA2 ,CLK_PLL0D24 ,1 ,1 ),DEF_FIXED ("za8" ,R8A774C0_CLK_ZA8 ,CLK_PLL0D8 ,1 ,1 ), +DEF_GEN3_Z ("z2" ,R8A774C0_CLK_Z2 ,CLK_TYPE_GEN3_Z ,CLK_PLL0 ,4 ,8 ),DEF_FIXED ("ztr" ,R8A774C0_CLK_ZTR ,CLK_PLL1 ,6 ,1 ),DEF_FIXED ("zt" ,R8A774C0_CLK_ZT ,CLK_PLL1 ,4 ,1 ), DEF_FIXED("zx", R8A774C0_CLK_ZX, CLK_PLL1, 3, 1),
Signature · 1 line
2.7.4
PATCH 17/23 clk: renesas: rcar-gen3: Correct parent clock of EHCI/OHCI
In reply to Biju DasFrom: Kazuya Mizuguchi <[email protected]>
commit 8d36fdcce21c1713eacf45380696f8cec3d724bf upstream.
According to the R-Car Gen3 Hardware Manual Rev. 1.00, and the RZ/G2 Hardware Manual Rev. 0.61, the parent clock of the EHCI/OHCI module clocks on R-Car Gen3 and RZ/G2 SoCs is S3D2.
--- drivers/clk/renesas/r8a774a1-cpg-mssr.c | 4 ++-- drivers/clk/renesas/r8a774c0-cpg-mssr.c | 2 +- drivers/clk/renesas/r8a7795-cpg-mssr.c | 8 ++++---- drivers/clk/renesas/r8a7796-cpg-mssr.c | 4 ++-- drivers/clk/renesas/r8a77965-cpg-mssr.c | 4 ++-- drivers/clk/renesas/r8a77990-cpg-mssr.c | 2 +- 6 files changed, 12 insertions(+), 12 deletions(-)
drivers/clk/renesas/r8a774a1-cpg-mssr.c +2 -2
@@ -165,8 +165,8 @@ static const struct mssr_mod_clk r8a774a1_mod_clks[] __initconst = {DEF_MOD ("vspd0" ,623 ,R8A774A1_CLK_S0D2 ),DEF_MOD ("vspb" ,626 ,R8A774A1_CLK_S0D1 ),DEF_MOD ("vspi0" ,631 ,R8A774A1_CLK_S0D1 ), -DEF_MOD ("ehci1" ,702 ,R8A774A1_CLK_S3D4 ), -DEF_MOD ("ehci0" ,703 ,R8A774A1_CLK_S3D4 ), +DEF_MOD ("ehci1" ,702 ,R8A774A1_CLK_S3D2 ), +DEF_MOD ("ehci0" ,703 ,R8A774A1_CLK_S3D2 ),DEF_MOD ("hsusb" ,704 ,R8A774A1_CLK_S3D4 ),DEF_MOD ("csi20" ,714 ,R8A774A1_CLK_CSI0 ), DEF_MOD("csi40", 716, R8A774A1_CLK_CSI0),
drivers/clk/renesas/r8a774c0-cpg-mssr.c +1 -1
@@ -178,7 +178,7 @@ static const struct mssr_mod_clk r8a774c0_mod_clks[] __initconst = {DEF_MOD ("vspb" ,626 ,R8A774C0_CLK_S0D1 ),DEF_MOD ("vspi0" ,631 ,R8A774C0_CLK_S0D1 ), -DEF_MOD ("ehci0" ,703 ,R8A774C0_CLK_S3D4 ), +DEF_MOD ("ehci0" ,703 ,R8A774C0_CLK_S3D2 ),DEF_MOD ("hsusb" ,704 ,R8A774C0_CLK_S3D4 ),DEF_MOD ("csi40" ,716 ,R8A774C0_CLK_CSI0 ), DEF_MOD("du1", 723, R8A774C0_CLK_S1D1),
drivers/clk/renesas/r8a7795-cpg-mssr.c +4 -4
@@ -196,10 +196,10 @@ static struct mssr_mod_clk r8a7795_mod_clks[] __initdata = {DEF_MOD ("vspi2" ,629 ,R8A7795_CLK_S2D1 ),/* ES1.x */ DEF_MOD ("vspi1" ,630 ,R8A7795_CLK_S0D1 ),DEF_MOD ("vspi0" ,631 ,R8A7795_CLK_S0D1 ), -DEF_MOD ("ehci3" ,700 ,R8A7795_CLK_S3D4 ), -DEF_MOD ("ehci2" ,701 ,R8A7795_CLK_S3D4 ), -DEF_MOD ("ehci1" ,702 ,R8A7795_CLK_S3D4 ), -DEF_MOD ("ehci0" ,703 ,R8A7795_CLK_S3D4 ), +DEF_MOD ("ehci3" ,700 ,R8A7795_CLK_S3D2 ), +DEF_MOD ("ehci2" ,701 ,R8A7795_CLK_S3D2 ), +DEF_MOD ("ehci1" ,702 ,R8A7795_CLK_S3D2 ), +DEF_MOD ("ehci0" ,703 ,R8A7795_CLK_S3D2 ),DEF_MOD ("hsusb" ,704 ,R8A7795_CLK_S3D4 ),DEF_MOD ("hsusb3" ,705 ,R8A7795_CLK_S3D4 ), DEF_MOD("csi21", 713, R8A7795_CLK_CSI0), /* ES1.x */
drivers/clk/renesas/r8a7796-cpg-mssr.c +2 -2
@@ -178,8 +178,8 @@ static const struct mssr_mod_clk r8a7796_mod_clks[] __initconst = {DEF_MOD ("vspd0" ,623 ,R8A7796_CLK_S0D2 ),DEF_MOD ("vspb" ,626 ,R8A7796_CLK_S0D1 ),DEF_MOD ("vspi0" ,631 ,R8A7796_CLK_S0D1 ), -DEF_MOD ("ehci1" ,702 ,R8A7796_CLK_S3D4 ), -DEF_MOD ("ehci0" ,703 ,R8A7796_CLK_S3D4 ), +DEF_MOD ("ehci1" ,702 ,R8A7796_CLK_S3D2 ), +DEF_MOD ("ehci0" ,703 ,R8A7796_CLK_S3D2 ),DEF_MOD ("hsusb" ,704 ,R8A7796_CLK_S3D4 ),DEF_MOD ("csi20" ,714 ,R8A7796_CLK_CSI0 ), DEF_MOD("csi40", 716, R8A7796_CLK_CSI0),
drivers/clk/renesas/r8a77965-cpg-mssr.c +2 -2
@@ -172,8 +172,8 @@ static const struct mssr_mod_clk r8a77965_mod_clks[] __initconst = {DEF_MOD ("vspb" ,626 ,R8A77965_CLK_S0D1 ),DEF_MOD ("vspi0" ,631 ,R8A77965_CLK_S0D1 ), -DEF_MOD ("ehci1" ,702 ,R8A77965_CLK_S3D4 ), -DEF_MOD ("ehci0" ,703 ,R8A77965_CLK_S3D4 ), +DEF_MOD ("ehci1" ,702 ,R8A77965_CLK_S3D2 ), +DEF_MOD ("ehci0" ,703 ,R8A77965_CLK_S3D2 ),DEF_MOD ("hsusb" ,704 ,R8A77965_CLK_S3D4 ),DEF_MOD ("csi20" ,714 ,R8A77965_CLK_CSI0 ), DEF_MOD("csi40", 716, R8A77965_CLK_CSI0),
drivers/clk/renesas/r8a77990-cpg-mssr.c +1 -1
@@ -172,7 +172,7 @@ static const struct mssr_mod_clk r8a77990_mod_clks[] __initconst = {DEF_MOD ("vspb" ,626 ,R8A77990_CLK_S0D1 ),DEF_MOD ("vspi0" ,631 ,R8A77990_CLK_S0D1 ), -DEF_MOD ("ehci0" ,703 ,R8A77990_CLK_S3D4 ), +DEF_MOD ("ehci0" ,703 ,R8A77990_CLK_S3D2 ),DEF_MOD ("hsusb" ,704 ,R8A77990_CLK_S3D4 ),DEF_MOD ("csi40" ,716 ,R8A77990_CLK_CSI0 ), DEF_MOD("du1", 723, R8A77990_CLK_S2D1),
Signature · 1 line
2.7.4
PATCH 18/23 clk: renesas: rcar-gen3: Correct parent clock of HS-USB
In reply to Biju DasFrom: Kazuya Mizuguchi <[email protected]>
commit c2182095c850a02e150613ac026be99ce1c2ff9f upstream.
According to the R-Car Gen3 Hardware Manual Rev. 1.00, and the RZ/G2 Hardware Manual Rev. 0.61, the parent clock of the HS-USB module clocks on R-Car Gen3 and RZ/G2 SoCs is S3D2.
--- drivers/clk/renesas/r8a774a1-cpg-mssr.c | 2 +- drivers/clk/renesas/r8a774c0-cpg-mssr.c | 2 +- drivers/clk/renesas/r8a7795-cpg-mssr.c | 4 ++-- drivers/clk/renesas/r8a7796-cpg-mssr.c | 2 +- drivers/clk/renesas/r8a77965-cpg-mssr.c | 2 +- drivers/clk/renesas/r8a77990-cpg-mssr.c | 2 +- 6 files changed, 7 insertions(+), 7 deletions(-)
drivers/clk/renesas/r8a774a1-cpg-mssr.c +1 -1
@@ -167,7 +167,7 @@ static const struct mssr_mod_clk r8a774a1_mod_clks[] __initconst = {DEF_MOD ("vspi0" ,631 ,R8A774A1_CLK_S0D1 ),DEF_MOD ("ehci1" ,702 ,R8A774A1_CLK_S3D2 ),DEF_MOD ("ehci0" ,703 ,R8A774A1_CLK_S3D2 ), -DEF_MOD ("hsusb" ,704 ,R8A774A1_CLK_S3D4 ), +DEF_MOD ("hsusb" ,704 ,R8A774A1_CLK_S3D2 ),DEF_MOD ("csi20" ,714 ,R8A774A1_CLK_CSI0 ),DEF_MOD ("csi40" ,716 ,R8A774A1_CLK_CSI0 ), DEF_MOD("du2", 722, R8A774A1_CLK_S2D1),
drivers/clk/renesas/r8a774c0-cpg-mssr.c +1 -1
@@ -179,7 +179,7 @@ static const struct mssr_mod_clk r8a774c0_mod_clks[] __initconst = {DEF_MOD ("vspi0" ,631 ,R8A774C0_CLK_S0D1 ),DEF_MOD ("ehci0" ,703 ,R8A774C0_CLK_S3D2 ), -DEF_MOD ("hsusb" ,704 ,R8A774C0_CLK_S3D4 ), +DEF_MOD ("hsusb" ,704 ,R8A774C0_CLK_S3D2 ),DEF_MOD ("csi40" ,716 ,R8A774C0_CLK_CSI0 ),DEF_MOD ("du1" ,723 ,R8A774C0_CLK_S1D1 ), DEF_MOD("du0", 724, R8A774C0_CLK_S1D1),
drivers/clk/renesas/r8a7795-cpg-mssr.c +2 -2
@@ -200,8 +200,8 @@ static struct mssr_mod_clk r8a7795_mod_clks[] __initdata = {DEF_MOD ("ehci2" ,701 ,R8A7795_CLK_S3D2 ),DEF_MOD ("ehci1" ,702 ,R8A7795_CLK_S3D2 ),DEF_MOD ("ehci0" ,703 ,R8A7795_CLK_S3D2 ), -DEF_MOD ("hsusb" ,704 ,R8A7795_CLK_S3D4 ), -DEF_MOD ("hsusb3" ,705 ,R8A7795_CLK_S3D4 ), +DEF_MOD ("hsusb" ,704 ,R8A7795_CLK_S3D2 ), +DEF_MOD ("hsusb3" ,705 ,R8A7795_CLK_S3D2 ),DEF_MOD ("csi21" ,713 ,R8A7795_CLK_CSI0 ),/* ES1.x */ DEF_MOD ("csi20" ,714 ,R8A7795_CLK_CSI0 ), DEF_MOD("csi41", 715, R8A7795_CLK_CSI0),
drivers/clk/renesas/r8a7796-cpg-mssr.c +1 -1
@@ -180,7 +180,7 @@ static const struct mssr_mod_clk r8a7796_mod_clks[] __initconst = {DEF_MOD ("vspi0" ,631 ,R8A7796_CLK_S0D1 ),DEF_MOD ("ehci1" ,702 ,R8A7796_CLK_S3D2 ),DEF_MOD ("ehci0" ,703 ,R8A7796_CLK_S3D2 ), -DEF_MOD ("hsusb" ,704 ,R8A7796_CLK_S3D4 ), +DEF_MOD ("hsusb" ,704 ,R8A7796_CLK_S3D2 ),DEF_MOD ("csi20" ,714 ,R8A7796_CLK_CSI0 ),DEF_MOD ("csi40" ,716 ,R8A7796_CLK_CSI0 ), DEF_MOD("du2", 722, R8A7796_CLK_S2D1),
drivers/clk/renesas/r8a77965-cpg-mssr.c +1 -1
@@ -174,7 +174,7 @@ static const struct mssr_mod_clk r8a77965_mod_clks[] __initconst = {DEF_MOD ("ehci1" ,702 ,R8A77965_CLK_S3D2 ),DEF_MOD ("ehci0" ,703 ,R8A77965_CLK_S3D2 ), -DEF_MOD ("hsusb" ,704 ,R8A77965_CLK_S3D4 ), +DEF_MOD ("hsusb" ,704 ,R8A77965_CLK_S3D2 ),DEF_MOD ("csi20" ,714 ,R8A77965_CLK_CSI0 ),DEF_MOD ("csi40" ,716 ,R8A77965_CLK_CSI0 ), DEF_MOD("du3", 721, R8A77965_CLK_S2D1),
drivers/clk/renesas/r8a77990-cpg-mssr.c +1 -1
@@ -173,7 +173,7 @@ static const struct mssr_mod_clk r8a77990_mod_clks[] __initconst = {DEF_MOD ("vspi0" ,631 ,R8A77990_CLK_S0D1 ),DEF_MOD ("ehci0" ,703 ,R8A77990_CLK_S3D2 ), -DEF_MOD ("hsusb" ,704 ,R8A77990_CLK_S3D4 ), +DEF_MOD ("hsusb" ,704 ,R8A77990_CLK_S3D2 ),DEF_MOD ("csi40" ,716 ,R8A77990_CLK_CSI0 ),DEF_MOD ("du1" ,723 ,R8A77990_CLK_S2D1 ), DEF_MOD("du0", 724, R8A77990_CLK_S2D1),
Signature · 1 line
2.7.4
PATCH 19/23 clk: renesas: rcar-gen3: Correct parent clock of SYS-DMAC
In reply to Biju DasFrom: Takeshi Kihara <[email protected]>
commit 3c772f71a552d343a96868ed9a809f9047be94f5 upstream.
The clock sources of the AXI BUS clock (266.66 MHz) used for SYS-DMAC DMA transfers are:
Channel R-Car H3 R-Car M3-W R-Car M3-N
-------------------------------------------------
SYS-DMAC0 S0D3 S0D3 S0D3
SYS-DMAC1 S3D1 S3D1 S3D1
SYS-DMAC2 S3D1 S3D1 S3D1
As a result, change the parent clocks of the SYS-DMAC{1,2} module clocks on R-Car H3, R-Car M3-W, and R-Car M3-N to S3D1.
NOTE: This information will be reflected in a future revision of the
R-Car Gen3 Hardware Manual.
--- drivers/clk/renesas/r8a774a1-cpg-mssr.c | 4 ++-- drivers/clk/renesas/r8a7795-cpg-mssr.c | 4 ++-- drivers/clk/renesas/r8a7796-cpg-mssr.c | 4 ++-- drivers/clk/renesas/r8a77965-cpg-mssr.c | 4 ++-- 4 files changed, 8 insertions(+), 8 deletions(-)
drivers/clk/renesas/r8a774a1-cpg-mssr.c +2 -2
@@ -123,8 +123,8 @@ static const struct mssr_mod_clk r8a774a1_mod_clks[] __initconst = {DEF_MOD ("msiof2" ,209 ,R8A774A1_CLK_MSO ),DEF_MOD ("msiof1" ,210 ,R8A774A1_CLK_MSO ),DEF_MOD ("msiof0" ,211 ,R8A774A1_CLK_MSO ), -DEF_MOD ("sys-dmac2" ,217 ,R8A774A1_CLK_S0D3 ), -DEF_MOD ("sys-dmac1" ,218 ,R8A774A1_CLK_S0D3 ), +DEF_MOD ("sys-dmac2" ,217 ,R8A774A1_CLK_S3D1 ), +DEF_MOD ("sys-dmac1" ,218 ,R8A774A1_CLK_S3D1 ),DEF_MOD ("sys-dmac0" ,219 ,R8A774A1_CLK_S0D3 ),DEF_MOD ("cmt3" ,300 ,R8A774A1_CLK_R ), DEF_MOD("cmt2", 301, R8A774A1_CLK_R),
drivers/clk/renesas/r8a7795-cpg-mssr.c +2 -2
@@ -131,8 +131,8 @@ static struct mssr_mod_clk r8a7795_mod_clks[] __initdata = {DEF_MOD ("msiof2" ,209 ,R8A7795_CLK_MSO ),DEF_MOD ("msiof1" ,210 ,R8A7795_CLK_MSO ),DEF_MOD ("msiof0" ,211 ,R8A7795_CLK_MSO ), -DEF_MOD ("sys-dmac2" ,217 ,R8A7795_CLK_S0D3 ), -DEF_MOD ("sys-dmac1" ,218 ,R8A7795_CLK_S0D3 ), +DEF_MOD ("sys-dmac2" ,217 ,R8A7795_CLK_S3D1 ), +DEF_MOD ("sys-dmac1" ,218 ,R8A7795_CLK_S3D1 ),DEF_MOD ("sys-dmac0" ,219 ,R8A7795_CLK_S0D3 ),DEF_MOD ("sceg-pub" ,229 ,R8A7795_CLK_CR ), DEF_MOD("cmt3", 300, R8A7795_CLK_R),
drivers/clk/renesas/r8a7796-cpg-mssr.c +2 -2
@@ -128,8 +128,8 @@ static const struct mssr_mod_clk r8a7796_mod_clks[] __initconst = {DEF_MOD ("msiof2" ,209 ,R8A7796_CLK_MSO ),DEF_MOD ("msiof1" ,210 ,R8A7796_CLK_MSO ),DEF_MOD ("msiof0" ,211 ,R8A7796_CLK_MSO ), -DEF_MOD ("sys-dmac2" ,217 ,R8A7796_CLK_S0D3 ), -DEF_MOD ("sys-dmac1" ,218 ,R8A7796_CLK_S0D3 ), +DEF_MOD ("sys-dmac2" ,217 ,R8A7796_CLK_S3D1 ), +DEF_MOD ("sys-dmac1" ,218 ,R8A7796_CLK_S3D1 ),DEF_MOD ("sys-dmac0" ,219 ,R8A7796_CLK_S0D3 ),DEF_MOD ("cmt3" ,300 ,R8A7796_CLK_R ), DEF_MOD("cmt2", 301, R8A7796_CLK_R),
drivers/clk/renesas/r8a77965-cpg-mssr.c +2 -2
@@ -120,8 +120,8 @@ static const struct mssr_mod_clk r8a77965_mod_clks[] __initconst = {DEF_MOD ("msiof2" ,209 ,R8A77965_CLK_MSO ),DEF_MOD ("msiof1" ,210 ,R8A77965_CLK_MSO ),DEF_MOD ("msiof0" ,211 ,R8A77965_CLK_MSO ), -DEF_MOD ("sys-dmac2" ,217 ,R8A77965_CLK_S0D3 ), -DEF_MOD ("sys-dmac1" ,218 ,R8A77965_CLK_S0D3 ), +DEF_MOD ("sys-dmac2" ,217 ,R8A77965_CLK_S3D1 ), +DEF_MOD ("sys-dmac1" ,218 ,R8A77965_CLK_S3D1 ),DEF_MOD ("sys-dmac0" ,219 ,R8A77965_CLK_S0D3 ), DEF_MOD("cmt3", 300, R8A77965_CLK_R),
Signature · 1 line
2.7.4
PATCH 20/23 clk: renesas: rcar-gen3: Correct parent clock of Audio-DMAC
In reply to Biju DasFrom: Takeshi Kihara <[email protected]>
commit b9df2ea2b8d09ad850afe4d4a0403cb23d9e0c02 upstream.
The clock sources of the AXI-bus clock (266.66 MHz) used for Audio-DMAC DMA transfers are:
Channel R-Car H3 R-Car M3-W R-Car M3-N R-Car E3
---------------------------------------------------------------
Audio-DMAC0 S1D2 S1D2 S1D2 S1D2
Audio-DMAC1 S1D2 S1D2 S1D2 -
As a result, change the parent clocks of the Audio-DMAC{0,1} module clocks on R-Car H3, R-Car M3-W, and R-Car M3-N to S1D2, and change the parent clock of the Audio-DMAC0 module on R-Car E3 to S1D2.
NOTE: This information will be reflected in a future revision of the
R-Car Gen3 Hardware Manual.
--- drivers/clk/renesas/r8a774a1-cpg-mssr.c | 4 ++-- drivers/clk/renesas/r8a774c0-cpg-mssr.c | 2 +- drivers/clk/renesas/r8a7795-cpg-mssr.c | 4 ++-- drivers/clk/renesas/r8a7796-cpg-mssr.c | 4 ++-- drivers/clk/renesas/r8a77965-cpg-mssr.c | 4 ++-- drivers/clk/renesas/r8a77990-cpg-mssr.c | 2 +- drivers/clk/renesas/r8a77995-cpg-mssr.c | 2 +- 7 files changed, 11 insertions(+), 11 deletions(-)
drivers/clk/renesas/r8a774a1-cpg-mssr.c +2 -2
@@ -143,8 +143,8 @@ static const struct mssr_mod_clk r8a774a1_mod_clks[] __initconst = {DEF_MOD ("rwdt" ,402 ,R8A774A1_CLK_R ),DEF_MOD ("intc-ex" ,407 ,R8A774A1_CLK_CP ),DEF_MOD ("intc-ap" ,408 ,R8A774A1_CLK_S0D3 ), -DEF_MOD ("audmac1" ,501 ,R8A774A1_CLK_S0D3 ), -DEF_MOD ("audmac0" ,502 ,R8A774A1_CLK_S0D3 ), +DEF_MOD ("audmac1" ,501 ,R8A774A1_CLK_S1D2 ), +DEF_MOD ("audmac0" ,502 ,R8A774A1_CLK_S1D2 ),DEF_MOD ("hscif4" ,516 ,R8A774A1_CLK_S3D1 ),DEF_MOD ("hscif3" ,517 ,R8A774A1_CLK_S3D1 ), DEF_MOD("hscif2", 518, R8A774A1_CLK_S3D1),
drivers/clk/renesas/r8a774c0-cpg-mssr.c +1 -1
@@ -158,7 +158,7 @@ static const struct mssr_mod_clk r8a774c0_mod_clks[] __initconst = {DEF_MOD ("intc-ex" ,407 ,R8A774C0_CLK_CP ),DEF_MOD ("intc-ap" ,408 ,R8A774C0_CLK_S0D3 ), -DEF_MOD ("audmac0" ,502 ,R8A774C0_CLK_S3D4 ), +DEF_MOD ("audmac0" ,502 ,R8A774C0_CLK_S1D2 ),DEF_MOD ("hscif4" ,516 ,R8A774C0_CLK_S3D1C ),DEF_MOD ("hscif3" ,517 ,R8A774C0_CLK_S3D1C ), DEF_MOD("hscif2", 518, R8A774C0_CLK_S3D1C),
drivers/clk/renesas/r8a7795-cpg-mssr.c +2 -2
@@ -155,8 +155,8 @@ static struct mssr_mod_clk r8a7795_mod_clks[] __initdata = {DEF_MOD ("rwdt" ,402 ,R8A7795_CLK_R ),DEF_MOD ("intc-ex" ,407 ,R8A7795_CLK_CP ),DEF_MOD ("intc-ap" ,408 ,R8A7795_CLK_S0D3 ), -DEF_MOD ("audmac1" ,501 ,R8A7795_CLK_S0D3 ), -DEF_MOD ("audmac0" ,502 ,R8A7795_CLK_S0D3 ), +DEF_MOD ("audmac1" ,501 ,R8A7795_CLK_S1D2 ), +DEF_MOD ("audmac0" ,502 ,R8A7795_CLK_S1D2 ),DEF_MOD ("drif7" ,508 ,R8A7795_CLK_S3D2 ),DEF_MOD ("drif6" ,509 ,R8A7795_CLK_S3D2 ), DEF_MOD("drif5", 510, R8A7795_CLK_S3D2),
drivers/clk/renesas/r8a7796-cpg-mssr.c +2 -2
@@ -148,8 +148,8 @@ static const struct mssr_mod_clk r8a7796_mod_clks[] __initconst = {DEF_MOD ("rwdt" ,402 ,R8A7796_CLK_R ),DEF_MOD ("intc-ex" ,407 ,R8A7796_CLK_CP ),DEF_MOD ("intc-ap" ,408 ,R8A7796_CLK_S0D3 ), -DEF_MOD ("audmac1" ,501 ,R8A7796_CLK_S0D3 ), -DEF_MOD ("audmac0" ,502 ,R8A7796_CLK_S0D3 ), +DEF_MOD ("audmac1" ,501 ,R8A7796_CLK_S1D2 ), +DEF_MOD ("audmac0" ,502 ,R8A7796_CLK_S1D2 ),DEF_MOD ("drif7" ,508 ,R8A7796_CLK_S3D2 ),DEF_MOD ("drif6" ,509 ,R8A7796_CLK_S3D2 ), DEF_MOD("drif5", 510, R8A7796_CLK_S3D2),
drivers/clk/renesas/r8a77965-cpg-mssr.c +2 -2
@@ -143,8 +143,8 @@ static const struct mssr_mod_clk r8a77965_mod_clks[] __initconst = {DEF_MOD ("intc-ex" ,407 ,R8A77965_CLK_CP ),DEF_MOD ("intc-ap" ,408 ,R8A77965_CLK_S0D3 ), -DEF_MOD ("audmac1" ,501 ,R8A77965_CLK_S0D3 ), -DEF_MOD ("audmac0" ,502 ,R8A77965_CLK_S0D3 ), +DEF_MOD ("audmac1" ,501 ,R8A77965_CLK_S1D2 ), +DEF_MOD ("audmac0" ,502 ,R8A77965_CLK_S1D2 ),DEF_MOD ("drif7" ,508 ,R8A77965_CLK_S3D2 ),DEF_MOD ("drif6" ,509 ,R8A77965_CLK_S3D2 ), DEF_MOD("drif5", 510, R8A77965_CLK_S3D2),
drivers/clk/renesas/r8a77990-cpg-mssr.c +1 -1
@@ -144,7 +144,7 @@ static const struct mssr_mod_clk r8a77990_mod_clks[] __initconst = {DEF_MOD ("intc-ex" ,407 ,R8A77990_CLK_CP ),DEF_MOD ("intc-ap" ,408 ,R8A77990_CLK_S0D3 ), -DEF_MOD ("audmac0" ,502 ,R8A77990_CLK_S3D4 ), +DEF_MOD ("audmac0" ,502 ,R8A77990_CLK_S1D2 ),DEF_MOD ("drif7" ,508 ,R8A77990_CLK_S3D2 ),DEF_MOD ("drif6" ,509 ,R8A77990_CLK_S3D2 ), DEF_MOD("drif5", 510, R8A77990_CLK_S3D2),
drivers/clk/renesas/r8a77995-cpg-mssr.c +1 -1
@@ -128,7 +128,7 @@ static const struct mssr_mod_clk r8a77995_mod_clks[] __initconst = {DEF_MOD ("rwdt" ,402 ,R8A77995_CLK_R ),DEF_MOD ("intc-ex" ,407 ,R8A77995_CLK_CP ),DEF_MOD ("intc-ap" ,408 ,R8A77995_CLK_S1D2 ), -DEF_MOD ("audmac0" ,502 ,R8A77995_CLK_S3D1 ), +DEF_MOD ("audmac0" ,502 ,R8A77995_CLK_S1D2 ),DEF_MOD ("hscif3" ,517 ,R8A77995_CLK_S3D1C ),DEF_MOD ("hscif0" ,520 ,R8A77995_CLK_S3D1C ), DEF_MOD("thermal", 522, R8A77995_CLK_CP),
Signature · 1 line
2.7.4
PATCH 21/23 clk: renesas: rcar-gen3: Fix cpg_sd_clock_round_rate() return value
In reply to Biju DasFrom: Takeshi Kihara <[email protected]>
commit b953eaaeb58efc944f51cffd3f6838657958f0f8 upstream.
cpg_sd_clock_round_rate() may return an unsupported clock rate for the requested clock rate. Therefore, when cpg_sd_clock_set_rate() sets the clock rate acquired by cpg_sd_clock_round_rate(), an error may occur.
This is not conform the clk API design.
This patch fixes that by making sure cpg_sd_clock_calc_div() considers only the division values defined in cpg_sd_div_table[]. With this fix, the cpg_sd_clock_round_rate() always return a support clock rate.
--- drivers/clk/renesas/rcar-gen3-cpg.c | 30 ++++++++++++++---------------- 1 file changed, 14 insertions(+), 16 deletions(-)
drivers/clk/renesas/rcar-gen3-cpg.c +14 -16
@@ -2,6 +2,7 @@* R-Car Gen3 Clock Pulse Generator * * Copyright (C) 2015-2018 Glider bvba +* Copyright (C) 2019 Renesas Electronics Corp. * * Based on clk-rcar-gen3.c *
@@ -239,8 +240,6 @@ struct sd_clock {const struct sd_div_table *div_table;struct cpg_simple_notifier csn;unsigned int div_num; -unsigned int div_min; -unsigned int div_max;unsigned int cur_div_idx; };
@@ -317,14 +316,20 @@ static unsigned int cpg_sd_clock_calc_div(struct sd_clock *clock,unsigned long rate, unsigned long parent_rate) { - unsigned int div; - -if (!rate) - rate =1 ; - - div =DIV_ROUND_CLOSEST (parent_rate, rate); + unsigned long calc_rate, diff, diff_min = ULONG_MAX; +unsigned int i, best_div =0 ; + +for (i =0 ; i < clock->div_num; i++) { + calc_rate =DIV_ROUND_CLOSEST (parent_rate, + clock->div_table[i].div); + diff = calc_rate > rate ? calc_rate - rate : rate - calc_rate; +if (diff < diff_min) { + best_div = clock->div_table[i].div; + diff_min = diff; + } + } - return clamp_t(unsigned int, div, clock->div_min, clock->div_max); +return best_div; } static long cpg_sd_clock_round_rate(struct clk_hw *hw, unsigned long rate,
@@ -408,13 +413,6 @@ static struct clk * __init cpg_sd_clk_register(const char *name, val |=CPG_SD_STP_MASK | (clock->div_table[0 ].val &CPG_SD_FC_MASK );writel (val, clock->csn.reg); - clock->div_max = clock->div_table[0 ].div; - clock->div_min = clock->div_max; -for (i =1 ; i < clock->div_num; i++) { - clock->div_max =max (clock->div_max, clock->div_table[i].div); - clock->div_min =min (clock->div_min, clock->div_table[i].div); - } - clk =clk_register (NULL , &clock->hw);if (IS_ERR (clk)) goto free_clock;
Signature · 1 line
2.7.4
PATCH 21/23 clk: renesas: rcar-gen3: Fix cpg_sd_clock_round_rate() return value
Hi!
Quoted 6 lines
This is not conform the clk API design.
This patch fixes that by making sure
cpg_sd_clock_calc_div()considers only the division values defined in cpg_sd_div_table[]. With this fix, thecpg_sd_clock_round_rate()always return a support clock rate.
This is not quite correct english, but I guess it is too late to fix that.
Best regards,
Pavel
Signature · 9 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 181 bytes Desc: Digital signature URL: <http://lists.cip-project.org/pipermail/cip-dev/attachments/20190716/bf232362/attachment.sig>
PATCH 21/23 clk: renesas: rcar-gen3: Fix cpg_sd_clock_round_rate() return value
Hi Pavel,
Thanks for the feedback.
Quoted 5 lines
Subject: Re: [cip-dev] [PATCH 4.19.y-cip 21/23] clk: renesas: rcar-gen3: Fix
cpg_sd_clock_round_rate()return valueHi!
Quoted 8 lines
Quoted 6 lines
This is not conform the clk API design.
This patch fixes that by making sure
cpg_sd_clock_calc_div()considers only the division values defined in cpg_sd_div_table[]. With this fix, thecpg_sd_clock_round_rate()always return a support clock rate.This is not quite correct english, but I guess it is too late to fix that.
Yes, I agree with you. It is too late to fix it.
Regards,
Biju
PATCH 22/23 clk: renesas: rcar-gen3: Remove unused variable
In reply to Biju DasFrom: Stephen Boyd <[email protected]>
commit c2f0705f85fdf35a5670df9926f060a37be77439 upstream.
This variable is no longer used and the compiler rightly complains that it should be removed. Drop it to silence the following:
drivers/clk/renesas/rcar-gen3-cpg.c: In function 'cpg_sd_clk_register':drivers/clk/renesas/rcar-gen3-cpg.c:386:15: warning: unused variable 'i' [-Wunused-variable]
unsigned int i;
--- drivers/clk/renesas/rcar-gen3-cpg.c | 1 - 1 file changed, 1 deletion(-)
drivers/clk/renesas/rcar-gen3-cpg.c +0 -1
@@ -386,7 +386,6 @@ static struct clk * __init cpg_sd_clk_register(const char *name,struct clk_init_data init;struct sd_clock *clock;struct clk *clk; -unsigned int i;u32 val; clock =kzalloc (sizeof (*clock),GFP_KERNEL );
Signature · 1 line
2.7.4
PATCH 23/23 arm64: dts: renesas: r8a774c0: Add OPPs table for cpu devices
In reply to Biju DasFrom: Fabrizio Castro <[email protected]>
commit 231d8908a66fa98f09553d31ad8cd5f382b29959 upstream.
This patch defines OOP tables for all CPUs, similarly to what done by Takeshi Kihara and Yoshihiro Kaneko for the R8A77990.
--- arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+)
arch/arm64/boot/dts/renesas/r8a774c0.dtsi +25 -0
@@ -44,6 +44,27 @@ clock-frequency = <0>; }; + cluster1_opp: opp_table10 { + compatible = "operating-points-v2"; + opp-shared; + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + opp-suspend; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>;
@@ -55,6 +76,8 @@ power-domains = <&sysc R8A774C0_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + clocks =<&cpg CPG_CORE R8A774C0_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; }; a53_1: cpu at 1 {
@@ -64,6 +87,8 @@ power-domains = <&sysc R8A774C0_PD_CA53_CPU1>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + clocks =<&cpg CPG_CORE R8A774C0_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; }; L2_CA53: cache-controller-0 {
Signature · 1 line
2.7.4
cover Clock enhancements
In reply to Biju DasHi!
Quoted 5 lines
This patch series add OPP tables,HS400 quirk for SD clock, add support Z2 clock and fix some of parent clocks.
This patch series is based on linux-4.19.y-cip and all the patches in this series are cherry-picked from linux rc tree.
Ok, let me take a look. I assume the series are independent?
Best regards,
Pavel
Signature · 9 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 181 bytes Desc: Digital signature URL: <http://lists.cip-project.org/pipermail/cip-dev/attachments/20190715/01d60374/attachment.sig>
cover Clock enhancements
Quoted 9 lines · Pavel Machek
Hi!
Quoted 5 lines
This patch series add OPP tables,HS400 quirk for SD clock, add support Z2 clock and fix some of parent clocks.
This patch series is based on linux-4.19.y-cip and all the patches in this series are cherry-picked from linux rc tree.
Ok, let me take a look. I assume the series are independent?
Aha, you actually annotated series with dependencies. Thanks!
I have some minor comments here, but overall series is good and I'll probably apply it tommorow if noone objects.
Best regards,
Pavel
Signature · 9 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 181 bytes Desc: Digital signature URL: <http://lists.cip-project.org/pipermail/cip-dev/attachments/20190715/7f705d02/attachment-0001.sig>
cover Clock enhancements
In reply to Pavel MachekHi Pavel,
Thanks for the feedback.
Quoted 11 lines
Subject: Re: [cip-dev] [PATCH 4.19.y-cip 00/23] Clock enhancements
Hi!
Quoted 5 lines
This patch series add OPP tables,HS400 quirk for SD clock, add support Z2 clock and fix some of parent clocks.
This patch series is based on linux-4.19.y-cip and all the patches in this series are cherry-picked from linux rc tree.
Ok, let me take a look. I assume the series are independent?
Yes. This series is independent.
Regds,
Biju
cover Clock enhancements
In reply to Biju DasHi!
Quoted 5 lines
This patch series add OPP tables,HS400 quirk for SD clock, add support Z2 clock and fix some of parent clocks.
This patch series is based on linux-4.19.y-cip and all the patches in this series are cherry-picked from linux rc tree.
Thanks. Applied and pushed out.
Best regards,
Pavel
Signature · 9 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 181 bytes Desc: Digital signature URL: <http://lists.cip-project.org/pipermail/cip-dev/attachments/20190716/b2864c74/attachment-0001.sig>