imx: add u-boot-nand.imx target
Subsystems (4)
PATCH 1/1 imx: add u-boot-nand.imx target
From: Igor Opaniuk <[email protected]>
Add an additional target which prepends the u-boot.imx image with 0x400 padding bytes. On Vybrid and i.MX 7, i.MX6ULL this is required for NAND boot devices. The configuration CONFIG_IMX_NAND enables this image for a board.
---
Makefile | 3 +++ arch/arm/config.mk | 4 ++++ arch/arm/mach-imx/Makefile | 7 +++++++ 3 files changed, 14 insertions(+)
Makefile +3 -0
@@ -1106,6 +1106,9 @@ endif %.vyb: %.imx $(Q)$(MAKE) $(build)=arch/arm/cpu/armv7/vf610 $@ +u-boot-nand.imx: u-boot.imx + $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@ + quiet_cmd_copy = COPY $@ cmd_copy = cp $< $@
arch/arm/config.mk +4 -0
@@ -157,12 +157,16 @@ ifndef CONFIG_SPL_BUILD ALL-y += SPL endif else +ifeq ($(CONFIG_IMX_NAND),y) +ALL-y += u-boot-nand.imx +else ifeq ($(CONFIG_OF_SEPARATE),y) ALL-y += u-boot-dtb.imx else ALL-y += u-boot.imx endif endif +endif ifneq ($(CONFIG_VF610),) ALL-y += u-boot.vyb endif
arch/arm/mach-imx/Makefile +7 -0
@@ -112,6 +112,13 @@ u-boot.imx: MKIMAGEOUTPUT = u-boot.imx.log u-boot.imx: u-boot.bin u-boot.cfgout $(PLUGIN).bin FORCE $(call if_changed,mkimage) +ifeq ($(CONFIG_IMX_NAND),y) +cmd_u-boot-nand_imx = (dd bs=1024 count=1 if=/dev/zero 2>/dev/null) | \ + cat - $< > $@ +u-boot-nand.imx: u-boot.imx FORCE + $(call if_changed,u-boot-nand_imx) +endif + ifeq ($(CONFIG_MULTI_DTB_FIT),y) MKIMAGEFLAGS_u-boot-dtb.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) \ -T $(IMAGE_TYPE) -e $(CONFIG_SYS_TEXT_BASE)
Signature · 1 line
2.17.1
PATCH 1/1 imx: add u-boot-nand.imx target
Quoted 7 lines · Igor Opaniuk
From: Igor Opaniuk <[email protected]>
Add an additional target which prepends the u-boot.imx image with
0x400padding bytes. On Vybrid and i.MX 7, i.MX6ULL this is required for NAND boot devices. The configurationCONFIG_IMX_NANDenables this image for a board.
How about trying like this for imx7.
PATCH 1/1 imx: add u-boot-nand.imx target
Hi Jagan,
Quoted 5 lines · Jagan Teki
Quoted 3 lines · Igor Opaniuk
From: Igor Opaniuk <[email protected]>
Quoted 8 lines
Quoted 4 lines
Add an additional target which prepends the u-boot.imx image with
0x400padding bytes. On Vybrid and i.MX 7, i.MX6ULL this is required for NAND boot devices. The configurationCONFIG_IMX_NANDenables this image for a board.How about trying like this for imx7.
yeah, makes sense, we can avoid messing with make instructions in arch/arm/config.mk and handle this in Kconfig. Will fix and send v2 soon.
Thanks
--
Best regards - Freundliche Grüsse - Meilleures salutations
Igor Opaniuk
mailto: igor.opaniuk at gmail.com
skype: igor.opanyuk
+380 (93) 836 40 67
http://ua.linkedin.com/in/iopaniuk