Skip to contentSkip to conversation

pico-imx7d: Enable DM_USB

PATCH New Joris Offouga 3 participants 4 messages Jun 11, 2019 – Jul 20, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 pico-imx7d: Enable DM_USB

This patch enable usb support with device-tree

---
 arch/arm/dts/imx7d-pico.dtsi             |  2 ++
 board/technexion/pico-imx7d/pico-imx7d.c | 13 -------------
 configs/pico-hobbit-imx7d_defconfig      |  1 +
 configs/pico-imx7d_bl33_defconfig        |  1 +
 configs/pico-imx7d_defconfig             |  1 +
 configs/pico-pi-imx7d_defconfig          |  1 +
 6 files changed, 6 insertions(+), 13 deletions(-)
arch/arm/dts/imx7d-pico.dtsi +2 -0
index 9f1fe683db..7cd8be24c8 100644
@@ -10,6 +10,7 @@
 / {
 	aliases {
 		mmc0 = &usdhc3;
+		usb0 = &usbotg1;
 	};
 
 	/* Will be filled by the bootloader */
@@ -296,6 +297,7 @@
 
 &usbotg1 {
 	vbus-supply = <&reg_usb_otg1_vbus>;
+	dr_mode = "peripheral";
 	status = "okay";
 };
 
board/technexion/pico-imx7d/pico-imx7d.c +0 -13
index e3d75e549a..216475c8de 100644
@@ -16,7 +16,6 @@
 #include <i2c.h>
 #include <miiphy.h>
 #include <netdev.h>
-#include <usb.h>
 #include <power/pmic.h>
 #include <power/pfuze3000_pmic.h>
 #include "../../freescale/common/pfuze.h"
@@ -328,15 +327,3 @@ int board_ehci_hcd_init(int port)
 	return 0;
 }
 
-int board_usb_phy_mode(int port)
-{
-	switch (port) {
-	case 0:
-		return USB_INIT_DEVICE;
-	case 1:
-		return USB_INIT_HOST;
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
configs/pico-hobbit-imx7d_defconfig +1 -0
index 9545d6bbd6..16859d7592 100644
@@ -51,6 +51,7 @@ CONFIG_FASTBOOT_FLASH_MMC_DEV=0
 CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_MMC=y
+CONFIG_DM_USB=y
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_PHYLIB=y
configs/pico-imx7d_bl33_defconfig +1 -0
index 932ed4c489..0d28fd9600 100644
@@ -43,6 +43,7 @@ CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DFU_MMC=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_MMC=y
+CONFIG_DM_USB=y
 CONFIG_FSL_ESDHC=y
 CONFIG_PHYLIB=y
 CONFIG_MII=y
configs/pico-imx7d_defconfig +1 -0
index 92ab9c5a50..05c3704d92 100644
@@ -51,6 +51,7 @@ CONFIG_FASTBOOT_FLASH_MMC_DEV=0
 CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_MMC=y
+CONFIG_DM_USB=y
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_PHYLIB=y
configs/pico-pi-imx7d_defconfig +1 -0
index 042affe01b..ffb02a7677 100644
@@ -51,6 +51,7 @@ CONFIG_FASTBOOT_FLASH_MMC_DEV=0
 CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_MMC=y
+CONFIG_DM_USB=y
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_PHYLIB=y
Signature · 1 line
2.17.1
#1 lore raw

PATCH 1/1 pico-imx7d: Enable DM_USB

+ Jun Nie for pico-imx7d_bl33_defconfig

Le 11/06/2019 à 14:08, Joris Offouga a écrit :

Quoted 108 lines

This patch enable usb support with device-tree

---
  arch/arm/dts/imx7d-pico.dtsi             |  2 ++
  board/technexion/pico-imx7d/pico-imx7d.c | 13 -------------
  configs/pico-hobbit-imx7d_defconfig      |  1 +
  configs/pico-imx7d_bl33_defconfig        |  1 +
  configs/pico-imx7d_defconfig             |  1 +
  configs/pico-pi-imx7d_defconfig          |  1 +
  6 files changed, 6 insertions(+), 13 deletions(-)
arch/arm/dts/imx7d-pico.dtsi +2 -0
index 9f1fe683db..7cd8be24c8 100644
@@ -10,6 +10,7 @@
  / {
  	aliases {
  		mmc0 = &usdhc3;
+		usb0 = &usbotg1;
  	};
 
  	/* Will be filled by the bootloader */
@@ -296,6 +297,7 @@
 
  &usbotg1 {
  	vbus-supply = <&reg_usb_otg1_vbus>;
+	dr_mode = "peripheral";
  	status = "okay";
  };
 
board/technexion/pico-imx7d/pico-imx7d.c +0 -13
index e3d75e549a..216475c8de 100644
@@ -16,7 +16,6 @@
  #include <i2c.h>
  #include <miiphy.h>
  #include <netdev.h>
-#include <usb.h>
  #include <power/pmic.h>
  #include <power/pfuze3000_pmic.h>
  #include "../../freescale/common/pfuze.h"
@@ -328,15 +327,3 @@ int board_ehci_hcd_init(int port)
  	return 0;
  }
 
-int board_usb_phy_mode(int port)
-{
-	switch (port) {
-	case 0:
-		return USB_INIT_DEVICE;
-	case 1:
-		return USB_INIT_HOST;
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
configs/pico-hobbit-imx7d_defconfig +1 -0
index 9545d6bbd6..16859d7592 100644
@@ -51,6 +51,7 @@ CONFIG_FASTBOOT_FLASH_MMC_DEV=0
  CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
  CONFIG_DM_GPIO=y
  CONFIG_DM_MMC=y
+CONFIG_DM_USB=y
  CONFIG_SUPPORT_EMMC_BOOT=y
  CONFIG_FSL_ESDHC=y
  CONFIG_PHYLIB=y
configs/pico-imx7d_bl33_defconfig +1 -0
index 932ed4c489..0d28fd9600 100644
@@ -43,6 +43,7 @@ CONFIG_NET_RANDOM_ETHADDR=y
  CONFIG_DFU_MMC=y
  CONFIG_DM_GPIO=y
  CONFIG_DM_MMC=y
+CONFIG_DM_USB=y
  CONFIG_FSL_ESDHC=y
  CONFIG_PHYLIB=y
  CONFIG_MII=y
configs/pico-imx7d_defconfig +1 -0
index 92ab9c5a50..05c3704d92 100644
@@ -51,6 +51,7 @@ CONFIG_FASTBOOT_FLASH_MMC_DEV=0
  CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
  CONFIG_DM_GPIO=y
  CONFIG_DM_MMC=y
+CONFIG_DM_USB=y
  CONFIG_SUPPORT_EMMC_BOOT=y
  CONFIG_FSL_ESDHC=y
  CONFIG_PHYLIB=y
configs/pico-pi-imx7d_defconfig +1 -0
index 042affe01b..ffb02a7677 100644
@@ -51,6 +51,7 @@ CONFIG_FASTBOOT_FLASH_MMC_DEV=0
  CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
  CONFIG_DM_GPIO=y
  CONFIG_DM_MMC=y
+CONFIG_DM_USB=y
  CONFIG_SUPPORT_EMMC_BOOT=y
  CONFIG_FSL_ESDHC=y
  CONFIG_PHYLIB=y
#2 lore raw

PATCH 1/1 pico-imx7d: Enable DM_USB

In reply to Joris Offouga
Quoted 4 lines · Joris Offouga <[email protected]> 于2019年6月11日周二 下午8:09写道:

This patch enable usb support with device-tree

Quoted 9 lines
---
 arch/arm/dts/imx7d-pico.dtsi             |  2 ++
 board/technexion/pico-imx7d/pico-imx7d.c | 13 -------------
 configs/pico-hobbit-imx7d_defconfig      |  1 +
 configs/pico-imx7d_bl33_defconfig        |  1 +
 configs/pico-imx7d_defconfig             |  1 +
 configs/pico-pi-imx7d_defconfig          |  1 +
 6 files changed, 6 insertions(+), 13 deletions(-)
#3 lore raw

PATCH 1/1 pico-imx7d: Enable DM_USB

In reply to Joris Offouga
Quoted 3 lines

This patch enable usb support with device-tree

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================