dt-bindings: timer: Convert Allwinner A10 Timer to a schema
PATCH 1/11 dt-bindings: timer: Convert Allwinner A10 Timer to a schema
The older Allwinner SoCs have a Timer supported in Linux, with a matching Device Tree binding.
While the original binding only mentions one interrupt, the timer actually has 6 of them.
Now that we have the DT validation in place, let's convert the device tree bindings for that controller over to a YAML schemas.
--- .../timer/allwinner,sun4i-a10-timer.yaml | 76 +++++++++++++++++++ .../bindings/timer/allwinner,sun4i-timer.txt | 19 ----- 2 files changed, 76 insertions(+), 19 deletions(-) create mode 100644 Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml delete mode 100644 Documentation/devicetree/bindings/timer/allwinner,sun4i-timer.txt
Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml new file +76 -0
@@ -0,0 +1,76 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/allwinner,sun4i-a10-timer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Timer Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <[email protected]> + - Maxime Ripard <[email protected]> + +properties: + compatible: + enum: + - allwinner,sun4i-a10-timer + - allwinner,suniv-f1c100s-timer + + reg: + maxItems: 1 + + interrupts: + description: + List of timers interrupts + + clocks: + maxItems: 1 + +allOf: + - if: + properties: + compatible: + items: + const: allwinner,sun4i-a10-timer + + then: + properties: + interrupts: + minItems: 6 + maxItems: 6 + + - if: + properties: + compatible: + items: + const: allwinner,suniv-f1c100s-timer + + then: + properties: + interrupts: + minItems: 3 + maxItems: 3 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + timer { + compatible = "allwinner,sun4i-a10-timer"; + reg = <0x01c20c00 0x400>; + interrupts = <22>, + <23>, + <24>, + <25>, + <67>, + <68>; + clocks = <&osc>; + }; + +...
Documentation/devicetree/bindings/timer/allwinner,sun4i-timer.txt deleted +0 -19
@@ -1,19 +0,0 @@ -Allwinner A1X SoCs Timer Controller - -Required properties: - -- compatible : should be one of the following: - "allwinner,sun4i-a10-timer" - "allwinner,suniv-f1c100s-timer" -- reg : Specifies base physical address and size of the registers. -- interrupts : The interrupt of the first timer -- clocks: phandle to the source clock (usually a 24 MHz fixed clock) - -Example: - -timer { - compatible = "allwinner,sun4i-a10-timer"; - reg = <0x01c20c00 0x400>; - interrupts = <22>; - clocks = <&osc>; -};
Signature · 1 line
2.21.0
PATCH 2/11 dt-bindings: timer: Add missing compatibles
Newer Allwinner SoCs have different number of interrupts, let's add different compatibles for all of them to deal with this properly.
--- .../timer/allwinner,sun4i-a10-timer.yaml | 26 +++++++++++++++++++ 1 file changed, 26 insertions(+)
Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml +26 -0
@@ -14,6 +14,8 @@ properties: compatible: enum: - allwinner,sun4i-a10-timer + - allwinner,sun8i-a23-timer + - allwinner,sun8i-v3s-timer - allwinner,suniv-f1c100s-timer reg:
@@ -39,6 +41,30 @@ allOf: minItems: 6 maxItems: 6 + - if: + properties: + compatible: + items: + const: allwinner,sun8i-a23-timer + + then: + properties: + interrupts: + minItems: 2 + maxItems: 2 + + - if: + properties: + compatible: + items: + const: allwinner,sun8i-v3s-timer + + then: + properties: + interrupts: + minItems: 3 + maxItems: 3 + - if: properties: compatible:
Signature · 1 line
2.21.0
Re: [PATCH 02/11] dt-bindings: timer: Add missing compatibles
Quoted 8 lines · Maxime Ripard
Newer Allwinner SoCs have different number of interrupts, let's add different compatibles for all of them to deal with this properly.
Signed-off-by Maxime Ripard <[email protected]>--- .../timer/allwinner,sun4i-a10-timer.yaml | 26 +++++++++++++++++++ 1 file changed, 26 insertions(+)
PATCH 3/11 clocksource: sun4i: Add missing compatibles
In reply to Maxime RipardNewer Allwinner SoCs have different number of interrupts, let's add different compatibles for all of them to deal with this properly.
--- drivers/clocksource/timer-sun4i.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/clocksource/timer-sun4i.c +4 -0
@@ -219,5 +219,9 @@ static int __init sun4i_timer_init(struct device_node *node) }TIMER_OF_DECLARE (sun4i,"allwinner,sun4i-a10-timer" , sun4i_timer_init); +TIMER_OF_DECLARE (sun8i_a23,"allwinner,sun8i-a23-timer" , + sun4i_timer_init); +TIMER_OF_DECLARE (sun8i_v3s,"allwinner,sun8i-v3s-timer" , + sun4i_timer_init);TIMER_OF_DECLARE (suniv,"allwinner,suniv-f1c100s-timer" , sun4i_timer_init);
Signature · 1 line
2.21.0
Re: [PATCH 03/11] clocksource: sun4i: Add missing compatibles
Hi Daniel, Thomas,
Quoted 4 lines · Maxime Ripard
Newer Allwinner SoCs have different number of interrupts, let's add different compatibles for all of them to deal with this properly.
Signed-off-by Maxime Ripard <[email protected]>
Ping?
Maxime
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 03/11] clocksource: sun4i: Add missing compatibles
In reply to Maxime RipardQuoted 4 lines · Maxime Ripard
Newer Allwinner SoCs have different number of interrupts, let's add different compatibles for all of them to deal with this properly.
Signed-off-by Maxime Ripard <[email protected]>
Quoted 19 lines
--- drivers/clocksource/timer-sun4i.c | 4 ++++ 1 file changed, 4 insertions(+)drivers/clocksource/timer-sun4i.c +4
-0@@ -219,5 +219,9 @@ static int __init sun4i_timer_init(struct device_node *node) }TIMER_OF_DECLARE (sun4i,"allwinner,sun4i-a10-timer" , sun4i_timer_init); +TIMER_OF_DECLARE (sun8i_a23,"allwinner,sun8i-a23-timer" , + sun4i_timer_init); +TIMER_OF_DECLARE (sun8i_v3s,"allwinner,sun8i-v3s-timer" , + sun4i_timer_init);TIMER_OF_DECLARE (suniv,"allwinner,suniv-f1c100s-timer" , sun4i_timer_init);
Signature · 11 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 03/11] clocksource: sun4i: Add missing compatibles
Hi,
Quoted 7 lines · Daniel Lezcano
Quoted 4 lines · Maxime Ripard
Newer Allwinner SoCs have different number of interrupts, let's add different compatibles for all of them to deal with this properly.
Signed-off-by Maxime Ripard <[email protected]>Acked-by Daniel Lezcano <[email protected]>
Thanks!
Can you merge this through your tree (along with the bindings)? I'll merge the DT patches
Maxime
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 03/11] clocksource: sun4i: Add missing compatibles
Quoted 7 lines · Maxime Ripard
Hi,
Quoted 4 lines · Daniel Lezcano
Quoted 3 lines · Maxime Ripard
Newer Allwinner SoCs have different number of interrupts, let's add different compatibles for all of them to deal with this properly.
Quoted 8 lines
Quoted 3 lines
Quoted 1 line
Signed-off-by Maxime Ripard <[email protected]>Acked-by Daniel Lezcano <[email protected]>Thanks!
Can you merge this through your tree (along with the bindings)? I'll merge the DT patches
patches 1-4 then ?
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 03/11] clocksource: sun4i: Add missing compatibles
Quoted 10 lines · Daniel Lezcano
Quoted 9 lines · Maxime Ripard
Hi,
Quoted 6 lines · Daniel Lezcano
Quoted 4 lines · Maxime Ripard
Newer Allwinner SoCs have different number of interrupts, let's add different compatibles for all of them to deal with this properly.
Signed-off-by Maxime Ripard <[email protected]>
Quoted 8 lines
Quoted 6 lines
Quoted 1 line
Acked-by Daniel Lezcano <[email protected]>Thanks!
Can you merge this through your tree (along with the bindings)? I'll merge the DT patches
patches 1-4 then ?
Yep, thanks!
Maxime
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 03/11] clocksource: sun4i: Add missing compatibles
Quoted 13 lines · Maxime Ripard
Quoted 12 lines · Daniel Lezcano
Quoted 11 lines · Maxime Ripard
Hi,
Quoted 7 lines · Daniel Lezcano
Quoted 4 lines · Maxime Ripard
Newer Allwinner SoCs have different number of interrupts, let's add different compatibles for all of them to deal with this properly.
Signed-off-by Maxime Ripard <[email protected]>Acked-by Daniel Lezcano <[email protected]>
Quoted 8 lines
Quoted 6 lines
Quoted 4 lines
Thanks!
Can you merge this through your tree (along with the bindings)? I'll merge the DT patches
patches 1-4 then ?
Yep, thanks!
Ping?
Maxime
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 03/11] clocksource: sun4i: Add missing compatibles
Quoted 16 lines · Maxime Ripard
Quoted 15 lines · Maxime Ripard
Quoted 14 lines · Daniel Lezcano
Quoted 13 lines · Maxime Ripard
Hi,
Quoted 7 lines · Daniel Lezcano
Quoted 4 lines · Maxime Ripard
Newer Allwinner SoCs have different number of interrupts, let's add different compatibles for all of them to deal with this properly.
Signed-off-by Maxime Ripard <[email protected]>Acked-by Daniel Lezcano <[email protected]>Thanks!
Quoted 8 lines
Quoted 6 lines
Quoted 4 lines
Quoted 2 lines
Can you merge this through your tree (along with the bindings)? I'll merge the DT patches
patches 1-4 then ?
Yep, thanks!
Ping?
They are applied :)
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 03/11] clocksource: sun4i: Add missing compatibles
Quoted 20 lines · Daniel Lezcano
Quoted 19 lines · Maxime Ripard
Quoted 18 lines · Maxime Ripard
Quoted 17 lines · Daniel Lezcano
Quoted 15 lines · Maxime Ripard
Hi,
Quoted 7 lines · Daniel Lezcano
Quoted 4 lines · Maxime Ripard
Newer Allwinner SoCs have different number of interrupts, let's add different compatibles for all of them to deal with this properly.
Signed-off-by Maxime Ripard <[email protected]>Acked-by Daniel Lezcano <[email protected]>Thanks!
Can you merge this through your tree (along with the bindings)? I'll merge the DT patches
Quoted 7 lines
Quoted 5 lines
Quoted 3 lines
Quoted 1 line
patches 1-4 then ?
Yep, thanks!
Ping?
They are applied :)
Oh, my bad :)
Where is your tree these days? I couldn't find it in linux-next either :/
Thanks!
Maxime
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
Re: [PATCH 03/11] clocksource: sun4i: Add missing compatibles
Quoted 23 lines · Maxime Ripard
Quoted 22 lines · Daniel Lezcano
Quoted 21 lines · Maxime Ripard
Quoted 20 lines · Maxime Ripard
Quoted 18 lines · Daniel Lezcano
Quoted 7 lines · Maxime Ripard
Hi,
Quoted 4 lines · Daniel Lezcano
Quoted 3 lines · Maxime Ripard
Newer Allwinner SoCs have different number of interrupts, let's add different compatibles for all of them to deal with this properly.
Quoted 8 lines
Quoted 3 lines
Quoted 1 line
Signed-off-by Maxime Ripard <[email protected]>Acked-by Daniel Lezcano <[email protected]>Thanks!
Can you merge this through your tree (along with the bindings)? I'll merge the DT patches
patches 1-4 then ?
Quoted 7 lines
Quoted 5 lines
Quoted 3 lines
Quoted 1 line
Yep, thanks!
Ping?
They are applied :)
Oh, my bad :)
Actually, I should have tell you they were applied.
Quoted 1 line
Where is your tree these days? I couldn't find it in linux-next either
https://git.linaro.org/people/daniel.lezcano/linux.git/log/?h=clockevents/next
Signature · 11 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 4/11 dt-bindings: timer: Convert Allwinner A13 HSTimer to a schema
In reply to Maxime RipardThe newer Allwinner SoCs have a High Speed Timer supported in Linux, with a matching Device Tree binding.
Now that we have the DT validation in place, let's convert the device tree bindings for that controller over to a YAML schemas.
--- .../timer/allwinner,sun5i-a13-hstimer.txt | 26 ------ .../timer/allwinner,sun5i-a13-hstimer.yaml | 79 +++++++++++++++++++ 2 files changed, 79 insertions(+), 26 deletions(-) delete mode 100644 Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt create mode 100644 Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.yaml
Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt deleted +0 -26
@@ -1,26 +0,0 @@ -Allwinner SoCs High Speed Timer Controller - -Required properties: - -- compatible : should be "allwinner,sun5i-a13-hstimer" or - "allwinner,sun7i-a20-hstimer" -- reg : Specifies base physical address and size of the registers. -- interrupts : The interrupts of these timers (2 for the sun5i IP, 4 for the sun7i - one) -- clocks: phandle to the source clock (usually the AHB clock) - -Optional properties: -- resets: phandle to a reset controller asserting the timer - -Example: - -timer@1c60000 { - compatible = "allwinner,sun7i-a20-hstimer"; - reg = <0x01c60000 0x1000>; - interrupts = <0 51 1>, - <0 52 1>, - <0 53 1>, - <0 54 1>; - clocks = <&ahb1_gates 19>; - resets = <&ahb1rst 19>; -};
Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.yaml new file +79 -0
79 lines not on this page · raw message
Signature · 1 line
2.21.0
Re: [PATCH 04/11] dt-bindings: timer: Convert Allwinner A13 HSTimer to a schema
Quoted 7 lines · Maxime Ripard
The newer Allwinner SoCs have a High Speed Timer supported in Linux, with a matching Device Tree binding.
Now that we have the DT validation in place, let's convert the device tree bindings for that controller over to a YAML schemas.
Quoted 7 lines
Signed-off-by Maxime Ripard <[email protected]>--- .../timer/allwinner,sun5i-a13-hstimer.txt | 26 ------ .../timer/allwinner,sun5i-a13-hstimer.yaml | 79 +++++++++++++++++++ 2 files changed, 79 insertions(+), 26 deletions(-) delete mode 100644 Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt create mode 100644 Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.yaml
PATCH 5/11 ARM: dts: sun4i: Add missing timers interrupts
In reply to Maxime RipardThe timer unit in the A10 has 6 interrupts available. List all of them.
--- arch/arm/boot/dts/sun4i-a10.dtsi | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
arch/arm/boot/dts/sun4i-a10.dtsi +6 -1
@@ -803,7 +803,12 @@ timer@1c20c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0x90>; - interrupts = <22>; + interrupts = <22>, + <23>, + <24>, + <25>, + <67>, + <68>; clocks = <&osc24M>; };
Signature · 1 line
2.21.0
PATCH 6/11 ARM: dts: sun5i: Add missing timers interrupts
In reply to Maxime RipardThe timer unit in the sun5i die has 6 interrupts available. List all of them.
--- arch/arm/boot/dts/sun5i.dtsi | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
arch/arm/boot/dts/sun5i.dtsi +6 -1
@@ -588,7 +588,12 @@ timer@1c20c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0x90>; - interrupts = <22>; + interrupts = <22>, + <23>, + <24>, + <25>, + <67>, + <68>; clocks = <&ccu CLK_HOSC>; };
Signature · 1 line
2.21.0
PATCH 7/11 ARM: dts: sun6i: Add missing timers interrupts
In reply to Maxime RipardThe timer unit in the A31 has 6 interrupts available. List all of them.
--- arch/arm/boot/dts/sun6i-a31.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
arch/arm/boot/dts/sun6i-a31.dtsi +2 -1
@@ -736,7 +736,8 @@ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&osc24M>; };
Signature · 1 line
2.21.0
PATCH 8/11 ARM: dts: a23/a33: Change the timers compatible
In reply to Maxime RipardUnlike the A10 that has 6 timers available, the A23 and A33 has only two, with only two interrupts. Let's change the compatible to reflect that.
--- arch/arm/boot/dts/sun8i-a23-a33.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/sun8i-a23-a33.dtsi +1 -1
@@ -441,7 +441,7 @@ }; timer@1c20c00 { - compatible = "allwinner,sun4i-a10-timer"; + compatible = "allwinner,sun8i-a23-timer"; reg = <0x01c20c00 0xa0>; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
Signature · 1 line
2.21.0
PATCH 9/11 ARM: dts: a83t: Change the timers compatible
In reply to Maxime RipardUnlike the A10 that has 6 timers available, the A83t has only two, with only two interrupts, just like the A23. Let's change the compatible to reflect that.
--- arch/arm/boot/dts/sun8i-a83t.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/sun8i-a83t.dtsi +1 -1
@@ -806,7 +806,7 @@ }; timer@1c20c00 { - compatible = "allwinner,sun4i-a10-timer"; + compatible = "allwinner,sun8i-a23-timer"; reg = <0x01c20c00 0xa0>; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
Signature · 1 line
2.21.0
PATCH 10/11 ARM: dts: h3: Change the timers compatible
In reply to Maxime RipardUnlike the A10 that has 6 timers available, the H3 has only two, with only two interrupts, just like the A23. Let's change the compatible to reflect that.
--- arch/arm/boot/dts/sunxi-h3-h5.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/sunxi-h3-h5.dtsi +1 -1
@@ -484,7 +484,7 @@ }; timer@1c20c00 { - compatible = "allwinner,sun4i-a10-timer"; + compatible = "allwinner,sun8i-a23-timer"; reg = <0x01c20c00 0xa0>; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
Signature · 1 line
2.21.0
PATCH 11/11 ARM: dts: v3s: Change the timers compatible
In reply to Maxime RipardUnlike the A10 that has 6 timers available, the v3s has only three, with only three interrupts. Let's change the compatible to reflect that, and add the missing interrupts.
--- arch/arm/boot/dts/sun8i-v3s.dtsi | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
arch/arm/boot/dts/sun8i-v3s.dtsi +3 -2
@@ -327,10 +327,11 @@ }; timer@1c20c00 { - compatible = "allwinner,sun4i-a10-timer"; + compatible = "allwinner,sun8i-v3s-timer"; reg = <0x01c20c00 0xa0>; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&osc24M>; };
Signature · 1 line
2.21.0
Quoted 10 lines · Maxime Ripard
The older Allwinner SoCs have a Timer supported in Linux, with a matching Device Tree binding.
While the original binding only mentions one interrupt, the timer actually has 6 of them.
Now that we have the DT validation in place, let's convert the device tree bindings for that controller over to a YAML schemas.
Quoted 7 lines
Signed-off-by Maxime Ripard <[email protected]>--- .../timer/allwinner,sun4i-a10-timer.yaml | 76 +++++++++++++++++++ .../bindings/timer/allwinner,sun4i-timer.txt | 19 ----- 2 files changed, 76 insertions(+), 19 deletions(-) create mode 100644 Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml delete mode 100644 Documentation/devicetree/bindings/timer/allwinner,sun4i-timer.txt