Skip to contentSkip to conversation

mx6sabresd: Reduce overall SPL size

PATCH New Fabio Estevam 3 participants 3 messages Jul 23, 2019 – Aug 5, 2019

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 mx6sabresd: Reduce overall SPL size

Currently the SPL binary is 67 kB, which leaves only 1 kB of free internal RAM space.

The following options can be safely removed to save some precious SPL space:

- CONFIG_SPL_FS_EXT4: u-boot-dtb.img is stored in raw sector via dd command (at offset 69 kB)
- CONFIG_SPL_I2C_SUPPORT: I2C is not used during SPL
- CONFIG_SPL_OS_BOOT: no need to make Falcon mode supported by default

After this change the SPL binary size gets down to 51 kB.

---
 configs/mx6sabresd_defconfig | 3 ---
 1 file changed, 3 deletions(-)
configs/mx6sabresd_defconfig +0 -3
index 9400805831..84862feb8b 100644
@@ -23,9 +23,6 @@ CONFIG_BOUNCE_BUFFER=y
 CONFIG_SPL_TEXT_BASE=0x00908000
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_FIT_IMAGE_TINY=y
-CONFIG_SPL_FS_EXT4=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_USB_HOST_SUPPORT=y
 CONFIG_SPL_USB_GADGET=y
 CONFIG_SPL_USB_SDP_SUPPORT=y
Signature · 1 line
2.17.1
#1 lore raw

PATCH 1/1 mx6sabresd: Reduce overall SPL size

Quoted 24 lines

Subject: [PATCH] mx6sabresd: Reduce overall SPL size

Currently the SPL binary is 67 kB, which leaves only 1 kB of free internal RAM space.

The following options can be safely removed to save some precious SPL space:

- CONFIG_SPL_FS_EXT4: u-boot-dtb.img is stored in raw sector via dd command (at offset 69 kB)
- CONFIG_SPL_I2C_SUPPORT: I2C is not used during SPL
- CONFIG_SPL_OS_BOOT: no need to make Falcon mode supported by default

After this change the SPL binary size gets down to 51 kB.

---
 configs/mx6sabresd_defconfig | 3 ---
 1 file changed, 3 deletions(-)
configs/mx6sabresd_defconfig +0 -0
index 9400805831..84862feb8b 100644

configs/mx6sabresd_defconfig CONFIG_BOUNCE_BUFFER=y · line 28

Quoted 9 lines
configs/mx6sabresd_defconfig +0 -3
@@ -23,9 +23,6 @@ CONFIG_BOUNCE_BUFFER=y
 CONFIG_SPL_TEXT_BASE=0x00908000
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_FIT_IMAGE_TINY=y
-CONFIG_SPL_FS_EXT4=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_USB_HOST_SUPPORT=y
 CONFIG_SPL_USB_GADGET=y
 CONFIG_SPL_USB_SDP_SUPPORT=y
Quoted 2 lines

--
2.17.1

#2 lore raw

PATCH 1/1 mx6sabresd: Reduce overall SPL size

In reply to Fabio Estevam
Quoted 10 lines

Currently the SPL binary is 67 kB, which leaves only 1 kB of free internal RAM space.
The following options can be safely removed to save some precious SPL space:
- CONFIG_SPL_FS_EXT4: u-boot-dtb.img is stored in raw sector via dd command (at offset 69 kB)
- CONFIG_SPL_I2C_SUPPORT: I2C is not used during SPL
- CONFIG_SPL_OS_BOOT: no need to make Falcon mode supported by default
After this change the SPL binary size gets down to 51 kB.

Quoted 2 lines

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================