Skip to contentSkip to conversation

clk: imx7ulp: Make sure earlycon's clock is enabled

PATCH Applied [email protected] 2 participants 2 messages Jul 24, 2019 – Aug 3, 2019

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 clk: imx7ulp: Make sure earlycon's clock is enabled

From: Anson Huang <[email protected]>

Earlycon's clock could be disabled during kernel boot up, if earlycon is enabled and its clock is gated, then kernel boot up will fail. Make sure earlycon's clock is enabled during kernel boot up.

---
 drivers/clk/imx/clk-imx7ulp.c | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)
drivers/clk/imx/clk-imx7ulp.c +31 -0
index 42e4667..2022d9b 100644
@@ -42,6 +42,19 @@ static const struct clk_div_table ulp_div_table[] = {
 	{ .val = 7, .div = 64, },
 };
 
+static const int pcc2_uart_clk_ids[] __initconst = {
+	IMX7ULP_CLK_LPUART4,
+	IMX7ULP_CLK_LPUART5,
+};
+
+static const int pcc3_uart_clk_ids[] __initconst = {
+	IMX7ULP_CLK_LPUART6,
+	IMX7ULP_CLK_LPUART7,
+};
+
+static struct clk **pcc2_uart_clks[ARRAY_SIZE(pcc2_uart_clk_ids) + 1] __initdata;
+static struct clk **pcc3_uart_clks[ARRAY_SIZE(pcc3_uart_clk_ids) + 1] __initdata;
+
 static void __init imx7ulp_clk_scg1_init(struct device_node *np)
 {
 	struct clk_hw_onecell_data *clk_data;
@@ -135,6 +148,7 @@ static void __init imx7ulp_clk_pcc2_init(struct device_node *np)
 	struct clk_hw_onecell_data *clk_data;
 	struct clk_hw **clks;
 	void __iomem *base;
+	int i;
 
 	clk_data = kzalloc(struct_size(clk_data, hws, IMX7ULP_CLK_PCC2_END),
 			   GFP_KERNEL);
@@ -173,6 +187,14 @@ static void __init imx7ulp_clk_pcc2_init(struct device_node *np)
 	imx_check_clk_hws(clks, clk_data->num);
 
 	of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data);
+
+	for (i = 0; i < ARRAY_SIZE(pcc2_uart_clk_ids); i++) {
+		int index = pcc2_uart_clk_ids[i];
+
+		pcc2_uart_clks[i] = &clks[index]->clk;
+	}
+
+	imx_register_uart_clocks(pcc2_uart_clks);
 }
 CLK_OF_DECLARE(imx7ulp_clk_pcc2, "fsl,imx7ulp-pcc2", imx7ulp_clk_pcc2_init);
 
@@ -181,6 +203,7 @@ static void __init imx7ulp_clk_pcc3_init(struct device_node *np)
 	struct clk_hw_onecell_data *clk_data;
 	struct clk_hw **clks;
 	void __iomem *base;
+	int i;
 
 	clk_data = kzalloc(struct_size(clk_data, hws, IMX7ULP_CLK_PCC3_END),
 			   GFP_KERNEL);
@@ -218,6 +241,14 @@ static void __init imx7ulp_clk_pcc3_init(struct device_node *np)
 	imx_check_clk_hws(clks, clk_data->num);
 
 	of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data);
+
+	for (i = 0; i < ARRAY_SIZE(pcc3_uart_clk_ids); i++) {
+		int index = pcc3_uart_clk_ids[i];
+
+		pcc3_uart_clks[i] = &clks[index]->clk;
+	}
+
+	imx_register_uart_clocks(pcc3_uart_clks);
 }
 CLK_OF_DECLARE(imx7ulp_clk_pcc3, "fsl,imx7ulp-pcc3", imx7ulp_clk_pcc3_init);
 
Signature · 1 line
2.7.4
Applied
#1 lore raw
Quoted 8 lines · On Wed, Jul 24, 2019 at 11:06:00AM +0800, [email protected] wrote:

From: Anson Huang <[email protected]>

Earlycon's clock could be disabled during kernel boot up, if earlycon is enabled and its clock is gated, then kernel boot up will fail. Make sure earlycon's clock is enabled during kernel boot up.

Applied, thanks.