spl: sata: support U-Boot load from raw sata disk
PATCH v2 1/1 spl: sata: support U-Boot load from raw sata disk
Support load of the U-Boot image from raw SATA disk sector. This is equivalent to load from MMC raw sector.
Signed-off-by Baruch Siach <[email protected]>
---
v2:
Fix build when CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR is not defined (Stefan Roese)
--- common/spl/Kconfig | 14 ++++++++++++++ common/spl/spl_sata.c | 34 ++++++++++++++++++++++++++++++++++ 2 files changed, 48 insertions(+)
common/spl/Kconfig +14 -0
@@ -888,6 +888,20 @@ config SPL_SATA_SUPPORT expense and power consumption. This enables loading from SATA using a configured device. +config SPL_SATA_RAW_U_BOOT_USE_SECTOR + bool "SATA raw mode: by sector" + depends on SPL_SATA_SUPPORT + help + Use sector number for specifying U-Boot location on SATA disk in + raw mode. + +config SPL_SATA_RAW_U_BOOT_SECTOR + hex "Sector on the SATA disk to load U-Boot from" + depends on SPL_SATA_RAW_U_BOOT_USE_SECTOR + help + Sector on the SATA disk to load U-Boot from, when the SATA disk is being + used in raw mode. Units: SATA disk sectors (1 sector = 512 bytes). + config SPL_SERIAL_SUPPORT bool "Support serial" select SPL_PRINTF
common/spl/spl_sata.c +34 -0
@@ -25,6 +25,37 @@#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"#endif +#ifndef CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR +/* Dummy value to make the compiler happy */ +#define CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR 0x100 +#endif + +static int spl_sata_load_image_raw (struct spl_image_info *spl_image, +struct blk_desc *stor_dev,unsigned long sector) +{ +struct image_header *header; +unsigned long count; +u32 image_size_sectors; +int ret; + + header =spl_get_load_buffer (-sizeof (*header), stor_dev->blksz); + count =blk_dread (stor_dev, sector,1 , header); +if (count ==0 ) +return -EIO ; + + ret =spl_parse_image_header (spl_image, header); +if (ret) +return ret; + + image_size_sectors =DIV_ROUND_UP (spl_image->size, stor_dev->blksz); + count =blk_dread (stor_dev, sector, image_size_sectors, + (void *)spl_image->load_addr); +if (count != image_size_sectors) +return -EIO ; + +return 0 ; +} +static int spl_sata_load_image (struct spl_image_info *spl_image,struct spl_boot_device *bootdev) {
@@ -59,6 +90,9 @@ static int spl_sata_load_image(struct spl_image_info *spl_image, err =spl_load_image_fat (spl_image, stor_dev,CONFIG_SYS_SATA_FAT_BOOT_PARTITION ,CONFIG_SPL_FS_LOAD_PAYLOAD_NAME ); + }else if (IS_ENABLED (CONFIG_SPL_SATA_RAW_U_BOOT_USE_SECTOR )) { + err =spl_sata_load_image_raw (spl_image, stor_dev, +CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR ); } }if (err) {
Signature · 1 line
2.20.1
PATCH v2 1/1 spl: sata: support U-Boot load from raw sata disk
Quoted 4 lines · Baruch Siach
Support load of the U-Boot image from raw SATA disk sector. This is equivalent to load from MMC raw sector.
Signed-off-by Baruch Siach <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190724/c16023ce/attachment.sig>