configs: am57xx_evm_defconfig: Enable 'bcb' command
PATCH v2 1/2 configs: am57xx_evm_defconfig: Enable 'bcb' command
It is essential to have an access to BCB area of 'misc' partition on Android devices [1]. For BeagleBoard X15 the 'bcb' command will be further used for reboot reason implementation and booting to recovery. It can be also used for debugging reasons, like checking RescueParty messages in BCB area.
[1] doc/android/bcb.txt
---
Changes in v2:
- Handle HS defconfigs
configs/am57xx_evm_defconfig | 1 + configs/am57xx_hs_evm_defconfig | 1 + configs/am57xx_hs_evm_usb_defconfig | 1 + 3 files changed, 3 insertions(+)
configs/am57xx_evm_defconfig +1 -0
@@ -29,6 +29,7 @@ CONFIG_SPL_OS_BOOT=y CONFIG_SPL_SPI_LOAD=y CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_CMD_SPL=y +CONFIG_CMD_BCB=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_PMIC is not set
configs/am57xx_hs_evm_defconfig +1 -0
@@ -31,6 +31,7 @@ CONFIG_SPL_SEPARATE_BSS=y CONFIG_SPL_DMA_SUPPORT=y # CONFIG_SPL_NAND_SUPPORT is not set CONFIG_SPL_SPI_LOAD=y +CONFIG_CMD_BCB=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_PMIC is not set
configs/am57xx_hs_evm_usb_defconfig +1 -0
@@ -36,6 +36,7 @@ CONFIG_SPL_SPI_LOAD=y CONFIG_SPL_USB_GADGET=y CONFIG_SPL_DFU=y CONFIG_SPL_YMODEM_SUPPORT=y +CONFIG_CMD_BCB=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_PMIC is not set
Signature · 1 line
2.20.1
PATCH v2 2/2 configs: am57xx_evm_defconfig: Enable 'dtimg' command
We are going to implement DTBO partition for BeagleBoard X15 further. To support this, 'dtimg' command must be enabled.
---
Changes in v2:
- Handle HS defconfigs
configs/am57xx_evm_defconfig | 1 + configs/am57xx_hs_evm_defconfig | 1 + configs/am57xx_hs_evm_usb_defconfig | 1 + 3 files changed, 3 insertions(+)
configs/am57xx_evm_defconfig +1 -0
@@ -28,6 +28,7 @@ CONFIG_SPL_DMA_SUPPORT=y CONFIG_SPL_OS_BOOT=y CONFIG_SPL_SPI_LOAD=y CONFIG_SPL_YMODEM_SUPPORT=y +CONFIG_CMD_DTIMG=y CONFIG_CMD_SPL=y CONFIG_CMD_BCB=y # CONFIG_CMD_FLASH is not set
configs/am57xx_hs_evm_defconfig +1 -0
@@ -31,6 +31,7 @@ CONFIG_SPL_SEPARATE_BSS=y CONFIG_SPL_DMA_SUPPORT=y # CONFIG_SPL_NAND_SUPPORT is not set CONFIG_SPL_SPI_LOAD=y +CONFIG_CMD_DTIMG=y CONFIG_CMD_BCB=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set
configs/am57xx_hs_evm_usb_defconfig +1 -0
@@ -36,6 +36,7 @@ CONFIG_SPL_SPI_LOAD=y CONFIG_SPL_USB_GADGET=y CONFIG_SPL_DFU=y CONFIG_SPL_YMODEM_SUPPORT=y +CONFIG_CMD_DTIMG=y CONFIG_CMD_BCB=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set
Signature · 1 line
2.20.1
PATCH v2 2/2 configs: am57xx_evm_defconfig: Enable 'dtimg' command
Quoted 4 lines · Sam Protsenko
We are going to implement DTBO partition for BeagleBoard X15 further. To support this, 'dtimg' command must be enabled.
Signed-off-by Sam Protsenko <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190731/7dcb8465/attachment.sig>
PATCH v2 1/2 configs: am57xx_evm_defconfig: Enable 'bcb' command
In reply to Sam ProtsenkoQuoted 9 lines · Sam Protsenko
It is essential to have an access to BCB area of 'misc' partition on Android devices [1]. For BeagleBoard X15 the 'bcb' command will be further used for reboot reason implementation and booting to recovery. It can be also used for debugging reasons, like checking RescueParty messages in BCB area.
[1]
doc/android/bcb.txtSigned-off-by Sam Protsenko <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190731/069806db/attachment.sig>