Skip to contentSkip to conversation

mm/page_idle: Add per-pid idle page tracking using virtual indexing

PATCH Superseded Joel Fernandes (Google) 4 participants 10 messages Jul 26, 2019 – Aug 5, 2019

Subsystems (8)

v3 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

PATCH v3 1/2 mm/page_idle: Add per-pid idle page tracking using virtual indexing

The page_idle tracking feature currently requires looking up the pagemap for a process followed by interacting with /sys/kernel/mm/page_idle. Looking up PFN from pagemap in Android devices is not supported by unprivileged process and requires SYS_ADMIN and gives 0 for the PFN.

This patch adds support to directly interact with page_idle tracking at the PID level by introducing a /proc/<pid>/page_idle file. It follows the exact same semantics as the global /sys/kernel/mm/page_idle, but now looking up PFN through pagemap is not needed since the interface uses virtual frame numbers, and at the same time also does not require SYS_ADMIN.

In Android, we are using this for the heap profiler (heapprofd) which profiles and pin points code paths which allocates and leaves memory idle for long periods of time. This method solves the security issue with userspace learning the PFN, and while at it is also shown to yield better results than the pagemap lookup, the theory being that the window where the address space can change is reduced by eliminating the intermediate pagemap look up stage. In virtual address indexing, the process's mmap_sem is held for the duration of the access.

---
v2->v3:
Fixed a bug where I was doing a kfree that is not needed due to not needing to do GFP_ATOMIC allocations.

v1->v2:
Mark swap ptes as idle (Minchan)
Avoid need for GFP_ATOMIC (Andrew)
Get rid of idle_page_list lock by moving list to stack

Internal review -> v1:
Fixes from Suren.
Corrections to change log, docs (Florian, Sandeep)

 fs/proc/base.c            |   3 +
 fs/proc/internal.h        |   1 +
 fs/proc/task_mmu.c        |  57 +++++++
 include/linux/page_idle.h |   4 +
 mm/page_idle.c            | 340 +++++++++++++++++++++++++++++++++-----
 5 files changed, 360 insertions(+), 45 deletions(-)
fs/proc/base.c +3 -0
index 77eb628ecc7f..a58dd74606e9 100644
@@ -3021,6 +3021,9 @@ static const struct pid_entry tgid_base_stuff[] = {
 	REG("smaps",      S_IRUGO, proc_pid_smaps_operations),
 	REG("smaps_rollup", S_IRUGO, proc_pid_smaps_rollup_operations),
 	REG("pagemap",    S_IRUSR, proc_pagemap_operations),
+#ifdef CONFIG_IDLE_PAGE_TRACKING
+	REG("page_idle", S_IRUSR|S_IWUSR, proc_page_idle_operations),
+#endif
 #endif
 #ifdef CONFIG_SECURITY
 	DIR("attr",       S_IRUGO|S_IXUGO, proc_attr_dir_inode_operations, proc_attr_dir_operations),
fs/proc/internal.h +1 -0
index cd0c8d5ce9a1..bc9371880c63 100644
@@ -293,6 +293,7 @@ extern const struct file_operations proc_pid_smaps_operations;
 extern const struct file_operations proc_pid_smaps_rollup_operations;
 extern const struct file_operations proc_clear_refs_operations;
 extern const struct file_operations proc_pagemap_operations;
+extern const struct file_operations proc_page_idle_operations;
 
 extern unsigned long task_vsize(struct mm_struct *);
 extern unsigned long task_statm(struct mm_struct *,
fs/proc/task_mmu.c +57 -0

63 lines not on this page · raw message

include/linux/page_idle.h +4 -0
index 1e894d34bdce..f1bc2640d85e 100644
@@ -106,6 +106,10 @@ static inline void clear_page_idle(struct page *page)
 }
 #endif /* CONFIG_64BIT */
 
+ssize_t page_idle_proc_write(struct file *file,
+	char __user *buf, size_t count, loff_t *ppos, struct task_struct *tsk);
+ssize_t page_idle_proc_read(struct file *file,
+	char __user *buf, size_t count, loff_t *ppos, struct task_struct *tsk);
 #else /* !CONFIG_IDLE_PAGE_TRACKING */
 
 static inline bool page_is_young(struct page *page)
mm/page_idle.c +295 -45

401 lines not on this page · raw message

Signature · 1 line
2.22.0.709.g102302147b-goog
#1 lore raw

PATCH v3 2/2 doc: Update documentation for page_idle virtual address indexing

This patch updates the documentation with the new page_idle tracking feature which uses virtual address indexing.

---
 .../admin-guide/mm/idle_page_tracking.rst     | 43 ++++++++++++++++---
 1 file changed, 36 insertions(+), 7 deletions(-)
Documentation/admin-guide/mm/idle_page_tracking.rst +36 -7
index df9394fb39c2..1eeac78c94a7 100644
@@ -19,10 +19,14 @@ It is enabled by CONFIG_IDLE_PAGE_TRACKING=y.
 
 User API
 ========
+There are 2 ways to access the idle page tracking API. One uses physical
+address indexing, another uses a simpler virtual address indexing scheme.
 
-The idle page tracking API is located at ``/sys/kernel/mm/page_idle``.
-Currently, it consists of the only read-write file,
-``/sys/kernel/mm/page_idle/bitmap``.
+Physical address indexing
+-------------------------
+The idle page tracking API for physical address indexing using page frame
+numbers (PFN) is located at ``/sys/kernel/mm/page_idle``.  Currently, it
+consists of the only read-write file, ``/sys/kernel/mm/page_idle/bitmap``.
 
 The file implements a bitmap where each bit corresponds to a memory page. The
 bitmap is represented by an array of 8-byte integers, and the page at PFN #i is
@@ -74,6 +78,31 @@ See :ref:`Documentation/admin-guide/mm/pagemap.rst <pagemap>` for more
 information about ``/proc/pid/pagemap``, ``/proc/kpageflags``, and
 ``/proc/kpagecgroup``.
 
+Virtual address indexing
+------------------------
+The idle page tracking API for virtual address indexing using virtual page
+frame numbers (VFN) is located at ``/proc/<pid>/page_idle``. It is a bitmap
+that follows the same semantics as ``/sys/kernel/mm/page_idle/bitmap``
+except that it uses virtual instead of physical frame numbers.
+
+This idle page tracking API does not need deal with PFN so it does not require
+prior lookups of ``pagemap`` in order to find if page is idle or not. This is
+an advantage on some systems where looking up PFN is considered a security
+issue.  Also in some cases, this interface could be slightly more reliable to
+use than physical address indexing, since in physical address indexing, address
+space changes can occur between reading the ``pagemap`` and reading the
+``bitmap``, while in virtual address indexing, the process's ``mmap_sem`` is
+held for the duration of the access.
+
+To estimate the amount of pages that are not used by a workload one should:
+
+ 1. Mark all the workload's pages as idle by setting corresponding bits in
+    ``/proc/<pid>/page_idle``.
+
+ 2. Wait until the workload accesses its working set.
+
+ 3. Read ``/proc/<pid>/page_idle`` and count the number of bits set.
+
 .. _impl_details:
 
 Implementation Details
@@ -99,10 +128,10 @@ When a dirty page is written to swap or disk as a result of memory reclaim or
 exceeding the dirty memory limit, it is not marked referenced.
 
 The idle memory tracking feature adds a new page flag, the Idle flag. This flag
-is set manually, by writing to ``/sys/kernel/mm/page_idle/bitmap`` (see the
-:ref:`User API <user_api>`
-section), and cleared automatically whenever a page is referenced as defined
-above.
+is set manually, by writing to ``/sys/kernel/mm/page_idle/bitmap`` for physical
+addressing or by writing to ``/proc/<pid>/page_idle`` for virtual
+addressing (see the :ref:`User API <user_api>` section), and cleared
+automatically whenever a page is referenced as defined above.
 
 When a page is marked idle, the Accessed bit must be cleared in all PTEs it is
 mapped to, otherwise we will not be able to detect accesses to the page coming
Signature · 1 line
2.22.0.709.g102302147b-goog
Reviewed-by on v3 2/2
#2 lore raw

Re: [PATCH v3 2/2] doc: Update documentation for page_idle virtual address indexing

Thanks Joel, just a couple of nits for the doc inline below. Other than that,

I'll plan on making changes to Android to use this instead of the pagemap + page_idle. I think it will also be considerably faster.

Quoted 32 lines · Joel Fernandes (Google)

This patch updates the documentation with the new page_idle tracking feature which uses virtual address indexing.

---
 .../admin-guide/mm/idle_page_tracking.rst     | 43 ++++++++++++++++---
 1 file changed, 36 insertions(+), 7 deletions(-)
Documentation/admin-guide/mm/idle_page_tracking.rst +7 -3
index df9394fb39c2..1eeac78c94a7 100644
@@ -19,10 +19,14 @@ It is enabled by CONFIG_IDLE_PAGE_TRACKING=y.
 
 User API
 ========
+There are 2 ways to access the idle page tracking API. One uses physical
+address indexing, another uses a simpler virtual address indexing scheme.
 
-The idle page tracking API is located at ``/sys/kernel/mm/page_idle``.
-Currently, it consists of the only read-write file,
-``/sys/kernel/mm/page_idle/bitmap``.
+Physical address indexing
+-------------------------
+The idle page tracking API for physical address indexing using page frame
+numbers (PFN) is located at ``/sys/kernel/mm/page_idle``.  Currently, it
+consists of the only read-write file, ``/sys/kernel/mm/page_idle/bitmap``.
 
 The file implements a bitmap where each bit corresponds to a memory page. The
 bitmap is represented by an array of 8-byte integers, and the page at PFN #i is
@@ -74,6 +78,31 @@ See :ref:`Documentation/admin-guide/mm/pagemap.rst <pagemap>` for more
 information about ``/proc/pid/pagemap``, ``/proc/kpageflags``, and

Documentation/admin-guide/mm/idle_page_tracking.rst See :ref:`Documentation/admin-guide/mm/pagemap.rst <pagemap>` for more · line 88

Quoted 10 lines
Documentation/admin-guide/mm/idle_page_tracking.rst +8 -0
 ``/proc/kpagecgroup``.
 
+Virtual address indexing
+------------------------
+The idle page tracking API for virtual address indexing using virtual page
+frame numbers (VFN) is located at ``/proc/<pid>/page_idle``. It is a bitmap
+that follows the same semantics as ``/sys/kernel/mm/page_idle/bitmap``
+except that it uses virtual instead of physical frame numbers.
+
+This idle page tracking API does not need deal with PFN so it does not require

s/need//

Documentation/admin-guide/mm/idle_page_tracking.rst See :ref:`Documentation/admin-guide/mm/pagemap.rst <pagemap>` for more · line 89

Quoted 1 line
Documentation/admin-guide/mm/idle_page_tracking.rst +1 -0
+prior lookups of ``pagemap`` in order to find if page is idle or not. This is

s/in order to find if page is idle or not//

Quoted 40 lines
Documentation/admin-guide/mm/idle_page_tracking.rst +20 -4
+an advantage on some systems where looking up PFN is considered a security
+issue.  Also in some cases, this interface could be slightly more reliable to
+use than physical address indexing, since in physical address indexing, address
+space changes can occur between reading the ``pagemap`` and reading the
+``bitmap``, while in virtual address indexing, the process's ``mmap_sem`` is
+held for the duration of the access.
+
+To estimate the amount of pages that are not used by a workload one should:
+
+ 1. Mark all the workload's pages as idle by setting corresponding bits in
+    ``/proc/<pid>/page_idle``.
+
+ 2. Wait until the workload accesses its working set.
+
+ 3. Read ``/proc/<pid>/page_idle`` and count the number of bits set.
+
 .. _impl_details:
 
 Implementation Details
@@ -99,10 +128,10 @@ When a dirty page is written to swap or disk as a result of memory reclaim or
 exceeding the dirty memory limit, it is not marked referenced.
 
 The idle memory tracking feature adds a new page flag, the Idle flag. This flag
-is set manually, by writing to ``/sys/kernel/mm/page_idle/bitmap`` (see the
-:ref:`User API <user_api>`
-section), and cleared automatically whenever a page is referenced as defined
-above.
+is set manually, by writing to ``/sys/kernel/mm/page_idle/bitmap`` for physical
+addressing or by writing to ``/proc/<pid>/page_idle`` for virtual
+addressing (see the :ref:`User API <user_api>` section), and cleared
+automatically whenever a page is referenced as defined above.
 
 When a page is marked idle, the Accessed bit must be cleared in all PTEs it is
 mapped to, otherwise we will not be able to detect accesses to the page coming
Signature · 4 lines
2.22.0.709.g102302147b-goog

-- 
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].
#3 lore raw

Re: [PATCH v3 2/2] doc: Update documentation for page_idle virtual address indexing

Quoted 3 lines · On Fri, Jul 26, 2019 at 01:17:10PM -0700, [email protected] wrote:

Thanks Joel, just a couple of nits for the doc inline below. Other than that,

Thanks!

Quoted 2 lines

I'll plan on making changes to Android to use this instead of the pagemap + page_idle. I think it will also be considerably faster.

Cool, glad to know.

Quoted 46 lines · Joel Fernandes (Google)
Quoted 32 lines

This patch updates the documentation with the new page_idle tracking feature which uses virtual address indexing.

---
 .../admin-guide/mm/idle_page_tracking.rst     | 43 ++++++++++++++++---
 1 file changed, 36 insertions(+), 7 deletions(-)
Documentation/admin-guide/mm/idle_page_tracking.rst +7 -3
index df9394fb39c2..1eeac78c94a7 100644
@@ -19,10 +19,14 @@ It is enabled by CONFIG_IDLE_PAGE_TRACKING=y.
 
 User API
 ========
+There are 2 ways to access the idle page tracking API. One uses physical
+address indexing, another uses a simpler virtual address indexing scheme.
 
-The idle page tracking API is located at ``/sys/kernel/mm/page_idle``.
-Currently, it consists of the only read-write file,
-``/sys/kernel/mm/page_idle/bitmap``.
+Physical address indexing
+-------------------------
+The idle page tracking API for physical address indexing using page frame
+numbers (PFN) is located at ``/sys/kernel/mm/page_idle``.  Currently, it
+consists of the only read-write file, ``/sys/kernel/mm/page_idle/bitmap``.
 
 The file implements a bitmap where each bit corresponds to a memory page. The
 bitmap is represented by an array of 8-byte integers, and the page at PFN #i is
@@ -74,6 +78,31 @@ See :ref:`Documentation/admin-guide/mm/pagemap.rst <pagemap>` for more
 information about ``/proc/pid/pagemap``, ``/proc/kpageflags``, and

Documentation/admin-guide/mm/idle_page_tracking.rst See :ref:`Documentation/admin-guide/mm/pagemap.rst <pagemap>` for more · line 88

Quoted 10 lines
Documentation/admin-guide/mm/idle_page_tracking.rst +8 -0
 ``/proc/kpagecgroup``.
 
+Virtual address indexing
+------------------------
+The idle page tracking API for virtual address indexing using virtual page
+frame numbers (VFN) is located at ``/proc/<pid>/page_idle``. It is a bitmap
+that follows the same semantics as ``/sys/kernel/mm/page_idle/bitmap``
+except that it uses virtual instead of physical frame numbers.
+
+This idle page tracking API does not need deal with PFN so it does not require

s/need//

Quoted 3 lines

Documentation/admin-guide/mm/idle_page_tracking.rst See :ref:`Documentation/admin-guide/mm/pagemap.rst <pagemap>` for more · line 89

Quoted 1 line
Documentation/admin-guide/mm/idle_page_tracking.rst +1 -0
+prior lookups of ``pagemap`` in order to find if page is idle or not. This is

s/in order to find if page is idle or not//

Fixed both, thank you! Will send out update soon.

thanks,

- Joel

Reviewed-by on v3 2/2
#4 lore raw

Re: [PATCH v3 2/2] doc: Update documentation for page_idle virtual address indexing

In reply to Joel Fernandes (Google)
Quoted 4 lines · Joel Fernandes (Google)

This patch updates the documentation with the new page_idle tracking feature which uses virtual address indexing.

One nit below, otherwise

Quoted 27 lines
---
 .../admin-guide/mm/idle_page_tracking.rst     | 43 ++++++++++++++++---
 1 file changed, 36 insertions(+), 7 deletions(-)
Documentation/admin-guide/mm/idle_page_tracking.rst +7 -3
index df9394fb39c2..1eeac78c94a7 100644
@@ -19,10 +19,14 @@ It is enabled by CONFIG_IDLE_PAGE_TRACKING=y.
 
 User API
 ========
+There are 2 ways to access the idle page tracking API. One uses physical
+address indexing, another uses a simpler virtual address indexing scheme.
 
-The idle page tracking API is located at ``/sys/kernel/mm/page_idle``.
-Currently, it consists of the only read-write file,
-``/sys/kernel/mm/page_idle/bitmap``.
+Physical address indexing
+-------------------------
+The idle page tracking API for physical address indexing using page frame
+numbers (PFN) is located at ``/sys/kernel/mm/page_idle``.  Currently, it
+consists of the only read-write file, ``/sys/kernel/mm/page_idle/bitmap``.
 
 The file implements a bitmap where each bit corresponds to a memory page. The
 bitmap is represented by an array of 8-byte integers, and the page at PFN #i is

Documentation/admin-guide/mm/idle_page_tracking.rst See :ref:`Documentation/admin-guide/mm/pagemap.rst <pagemap>` for more · line 86

Quoted 9 lines
Documentation/admin-guide/mm/idle_page_tracking.rst +6 -0
@@ -74,6 +78,31 @@ See :ref:`Documentation/admin-guide/mm/pagemap.rst <pagemap>` for more
 information about ``/proc/pid/pagemap``, ``/proc/kpageflags``, and
 ``/proc/kpagecgroup``.
 
+Virtual address indexing
+------------------------
+The idle page tracking API for virtual address indexing using virtual page
+frame numbers (VFN) is located at ``/proc/<pid>/page_idle``. It is a bitmap
+that follows the same semantics as ``/sys/kernel/mm/page_idle/bitmap``
+except that it uses virtual instead of physical frame numbers.

Can you please make it more explicit that VFNs are in the <pid>'s address space?

Quoted 40 lines
Documentation/admin-guide/mm/idle_page_tracking.rst +23 -4
+
+This idle page tracking API does not need deal with PFN so it does not require
+prior lookups of ``pagemap`` in order to find if page is idle or not. This is
+an advantage on some systems where looking up PFN is considered a security
+issue.  Also in some cases, this interface could be slightly more reliable to
+use than physical address indexing, since in physical address indexing, address
+space changes can occur between reading the ``pagemap`` and reading the
+``bitmap``, while in virtual address indexing, the process's ``mmap_sem`` is
+held for the duration of the access.
+
+To estimate the amount of pages that are not used by a workload one should:
+
+ 1. Mark all the workload's pages as idle by setting corresponding bits in
+    ``/proc/<pid>/page_idle``.
+
+ 2. Wait until the workload accesses its working set.
+
+ 3. Read ``/proc/<pid>/page_idle`` and count the number of bits set.
+
 .. _impl_details:
 
 Implementation Details
@@ -99,10 +128,10 @@ When a dirty page is written to swap or disk as a result of memory reclaim or
 exceeding the dirty memory limit, it is not marked referenced.
 
 The idle memory tracking feature adds a new page flag, the Idle flag. This flag
-is set manually, by writing to ``/sys/kernel/mm/page_idle/bitmap`` (see the
-:ref:`User API <user_api>`
-section), and cleared automatically whenever a page is referenced as defined
-above.
+is set manually, by writing to ``/sys/kernel/mm/page_idle/bitmap`` for physical
+addressing or by writing to ``/proc/<pid>/page_idle`` for virtual
+addressing (see the :ref:`User API <user_api>` section), and cleared
+automatically whenever a page is referenced as defined above.
 
 When a page is marked idle, the Accessed bit must be cleared in all PTEs it is
 mapped to, otherwise we will not be able to detect accesses to the page coming
Signature · 1 line
2.22.0.709.g102302147b-goog
Signature · 2 lines
Sincerely yours,
Mike.
#5 lore raw
In reply to Joel Fernandes (Google)
Quoted 29 lines · Joel Fernandes (Google)

The page_idle tracking feature currently requires looking up the pagemap for a process followed by interacting with /sys/kernel/mm/page_idle. Looking up PFN from pagemap in Android devices is not supported by unprivileged process and requires SYS_ADMIN and gives 0 for the PFN.

This patch adds support to directly interact with page_idle tracking at the PID level by introducing a /proc/<pid>/page_idle file. It follows the exact same semantics as the global /sys/kernel/mm/page_idle, but now looking up PFN through pagemap is not needed since the interface uses virtual frame numbers, and at the same time also does not require SYS_ADMIN.

In Android, we are using this for the heap profiler (heapprofd) which profiles and pin points code paths which allocates and leaves memory idle for long periods of time. This method solves the security issue with userspace learning the PFN, and while at it is also shown to yield better results than the pagemap lookup, the theory being that the window where the address space can change is reduced by eliminating the intermediate pagemap look up stage. In virtual address indexing, the process's mmap_sem is held for the duration of the access.

---
v2->v3:
Fixed a bug where I was doing a kfree that is not needed due to not needing to do GFP_ATOMIC allocations.

Quoted 4 lines

v1->v2:
Mark swap ptes as idle (Minchan)
Avoid need for GFP_ATOMIC (Andrew)
Get rid of idle_page_list lock by moving list to stack

I believe all suggestions have been addressed. Do these look good now?

thanks,

- Joel

Quoted 18 lines

Internal review -> v1:
Fixes from Suren.
Corrections to change log, docs (Florian, Sandeep)

 fs/proc/base.c            |   3 +
 fs/proc/internal.h        |   1 +
 fs/proc/task_mmu.c        |  57 +++++++
 include/linux/page_idle.h |   4 +
 mm/page_idle.c            | 340 +++++++++++++++++++++++++++++++++-----
 5 files changed, 360 insertions(+), 45 deletions(-)
fs/proc/base.c +0 -0
index 77eb628ecc7f..a58dd74606e9 100644
@@ -3021,6 +3021,9 @@ static const struct pid_entry tgid_base_stuff[] = {
        REG("smaps",      S_IRUGO, proc_pid_smaps_operations),
        REG("smaps_rollup", S_IRUGO, proc_pid_smaps_rollup_operations),
#6 lore raw
In reply to Joel Fernandes (Google)

Hi Joel,

Quoted 80 lines · Joel Fernandes (Google)

The page_idle tracking feature currently requires looking up the pagemap for a process followed by interacting with /sys/kernel/mm/page_idle. Looking up PFN from pagemap in Android devices is not supported by unprivileged process and requires SYS_ADMIN and gives 0 for the PFN.

This patch adds support to directly interact with page_idle tracking at the PID level by introducing a /proc/<pid>/page_idle file. It follows the exact same semantics as the global /sys/kernel/mm/page_idle, but now looking up PFN through pagemap is not needed since the interface uses virtual frame numbers, and at the same time also does not require SYS_ADMIN.

In Android, we are using this for the heap profiler (heapprofd) which profiles and pin points code paths which allocates and leaves memory idle for long periods of time. This method solves the security issue with userspace learning the PFN, and while at it is also shown to yield better results than the pagemap lookup, the theory being that the window where the address space can change is reduced by eliminating the intermediate pagemap look up stage. In virtual address indexing, the process's mmap_sem is held for the duration of the access.

---
v2->v3:
Fixed a bug where I was doing a kfree that is not needed due to not needing to do GFP_ATOMIC allocations.

v1->v2:
Mark swap ptes as idle (Minchan)
Avoid need for GFP_ATOMIC (Andrew)
Get rid of idle_page_list lock by moving list to stack

Internal review -> v1:
Fixes from Suren.
Corrections to change log, docs (Florian, Sandeep)

 fs/proc/base.c            |   3 +
 fs/proc/internal.h        |   1 +
 fs/proc/task_mmu.c        |  57 +++++++
 include/linux/page_idle.h |   4 +
 mm/page_idle.c            | 340 +++++++++++++++++++++++++++++++++-----
 5 files changed, 360 insertions(+), 45 deletions(-)
fs/proc/base.c +3 -0
index 77eb628ecc7f..a58dd74606e9 100644
@@ -3021,6 +3021,9 @@ static const struct pid_entry tgid_base_stuff[] = {
 	REG("smaps",      S_IRUGO, proc_pid_smaps_operations),
 	REG("smaps_rollup", S_IRUGO, proc_pid_smaps_rollup_operations),
 	REG("pagemap",    S_IRUSR, proc_pagemap_operations),
+#ifdef CONFIG_IDLE_PAGE_TRACKING
+	REG("page_idle", S_IRUSR|S_IWUSR, proc_page_idle_operations),
+#endif
 #endif
 #ifdef CONFIG_SECURITY
 	DIR("attr",       S_IRUGO|S_IXUGO, proc_attr_dir_inode_operations, proc_attr_dir_operations),
fs/proc/internal.h +1 -0
index cd0c8d5ce9a1..bc9371880c63 100644
@@ -293,6 +293,7 @@ extern const struct file_operations proc_pid_smaps_operations;
 extern const struct file_operations proc_pid_smaps_rollup_operations;
 extern const struct file_operations proc_clear_refs_operations;
 extern const struct file_operations proc_pagemap_operations;
+extern const struct file_operations proc_page_idle_operations;
 
 extern unsigned long task_vsize(struct mm_struct *);
 extern unsigned long task_statm(struct mm_struct *,
fs/proc/task_mmu.c +2 -0
index 4d2b860dbc3f..11ccc53da38e 100644
@@ -1642,6 +1642,63 @@ const struct file_operations proc_pagemap_operations = {
 	.open		= pagemap_open,
 	.release	= pagemap_release,
 };
+
+#ifdef CONFIG_IDLE_PAGE_TRACKING

fs/proc/task_mmu.c const struct file_operations proc_pagemap_operations = { · line 1656

Quoted 10 lines
fs/proc/task_mmu.c +10 -0
+static ssize_t proc_page_idle_read(struct file *file, char __user *buf,
+				   size_t count, loff_t *ppos)
+{
+	int ret;
+	struct task_struct *tsk = get_proc_task(file_inode(file));
+
+	if (!tsk)
+		return -EINVAL;
+	ret = page_idle_proc_read(file, buf, count, ppos, tsk);
+	put_task_struct(tsk);

Why do you need task_struct here? You already got the task in open and got mm there so you could pass the MM here instead of task.

Quoted 87 lines
fs/proc/task_mmu.c +45 -0
+	return ret;
+}
+
+static ssize_t proc_page_idle_write(struct file *file, const char __user *buf,
+				 size_t count, loff_t *ppos)
+{
+	int ret;
+	struct task_struct *tsk = get_proc_task(file_inode(file));
+
+	if (!tsk)
+		return -EINVAL;
+	ret = page_idle_proc_write(file, (char __user *)buf, count, ppos, tsk);
+	put_task_struct(tsk);
+	return ret;
+}
+
+static int proc_page_idle_open(struct inode *inode, struct file *file)
+{
+	struct mm_struct *mm;
+
+	mm = proc_mem_open(inode, PTRACE_MODE_READ);
+	if (IS_ERR(mm))
+		return PTR_ERR(mm);
+	file->private_data = mm;
+	return 0;
+}
+
+static int proc_page_idle_release(struct inode *inode, struct file *file)
+{
+	struct mm_struct *mm = file->private_data;
+
+	if (mm)
+		mmdrop(mm);
+	return 0;
+}
+
+const struct file_operations proc_page_idle_operations = {
+	.llseek		= mem_lseek, /* borrow this */
+	.read		= proc_page_idle_read,
+	.write		= proc_page_idle_write,
+	.open		= proc_page_idle_open,
+	.release	= proc_page_idle_release,
+};
+#endif /* CONFIG_IDLE_PAGE_TRACKING */
+
 #endif /* CONFIG_PROC_PAGE_MONITOR */
 
 #ifdef CONFIG_NUMA
include/linux/page_idle.h +4 -0
index 1e894d34bdce..f1bc2640d85e 100644
@@ -106,6 +106,10 @@ static inline void clear_page_idle(struct page *page)
 }
 #endif /* CONFIG_64BIT */
 
+ssize_t page_idle_proc_write(struct file *file,
+	char __user *buf, size_t count, loff_t *ppos, struct task_struct *tsk);
+ssize_t page_idle_proc_read(struct file *file,
+	char __user *buf, size_t count, loff_t *ppos, struct task_struct *tsk);
 #else /* !CONFIG_IDLE_PAGE_TRACKING */
 
 static inline bool page_is_young(struct page *page)
mm/page_idle.c +6 -3
index 295512465065..86244f7f1faa 100644
@@ -5,12 +5,15 @@
 #include <linux/sysfs.h>
 #include <linux/kobject.h>
 #include <linux/mm.h>
-#include <linux/mmzone.h>
-#include <linux/pagemap.h>
-#include <linux/rmap.h>
 #include <linux/mmu_notifier.h>
+#include <linux/mmzone.h>
 #include <linux/page_ext.h>
 #include <linux/page_idle.h>
+#include <linux/pagemap.h>
+#include <linux/rmap.h>
+#include <linux/sched/mm.h>
+#include <linux/swap.h>
+#include <linux/swapops.h>
 
 #define BITMAP_CHUNK_SIZE	sizeof(u64)
 #define BITMAP_CHUNK_BITS	(BITMAP_CHUNK_SIZE * BITS_PER_BYTE)

mm/page_idle.c line 32

Quoted 8 lines
mm/page_idle.c +1 -3
@@ -25,18 +28,13 @@
  * page tracking. With such an indicator of user pages we can skip isolated
  * pages, but since there are not usually many of them, it will hardly affect
  * the overall result.
- *
- * This function tries to get a user memory page by pfn as described above.
  */
-static struct page *page_idle_get_page(unsigned long pfn)
+static struct page *page_idle_get_page(struct page *page_in)

Looks weird function name after you changed the argument. Maybe "bool check_valid_page(struct page *page)"?

Quoted 13 lines
mm/page_idle.c +1 -4
 {
 	struct page *page;
 	pg_data_t *pgdat;
 
-	if (!pfn_valid(pfn))
-		return NULL;
-
-	page = pfn_to_page(pfn);
+	page = page_in;
 	if (!page || !PageLRU(page) ||
 	    !get_page_unless_zero(page))
 		return NULL;

mm/page_idle.c static struct page *page_idle_get_page(unsigned long pfn) · line 55

Quoted 7 lines
mm/page_idle.c +4 -0
@@ -51,6 +49,18 @@ static struct page *page_idle_get_page(unsigned long pfn)
 	return page;
 }
 
+/*
+ * This function tries to get a user memory page by pfn as described above.
+ */
+static struct page *page_idle_get_page_pfn(unsigned long pfn)

So we could use page_idle_get_page name here.

mm/page_idle.c static struct page *page_idle_get_page(unsigned long pfn) · line 59

Quoted 4 lines
mm/page_idle.c +4 -0
+{
+
+	if (!pfn_valid(pfn))
+		return NULL;
    page = pfn_to_page(pfn);

    return check_valid_page(page) ? page : NULL;
Quoted 24 lines
mm/page_idle.c +17 -0
+
+	return page_idle_get_page(pfn_to_page(pfn));
+}
+
 static bool page_idle_clear_pte_refs_one(struct page *page,
 					struct vm_area_struct *vma,
 					unsigned long addr, void *arg)
@@ -118,6 +128,47 @@ static void page_idle_clear_pte_refs(struct page *page)
 		unlock_page(page);
 }
 
+/* Helper to get the start and end frame given a pos and count */
+static int page_idle_get_frames(loff_t pos, size_t count, struct mm_struct *mm,
+				unsigned long *start, unsigned long *end)
+{
+	unsigned long max_frame;
+
+	/* If an mm is not given, assume we want physical frames */
+	max_frame = mm ? (mm->task_size >> PAGE_SHIFT) : max_pfn;
+
+	if (pos % BITMAP_CHUNK_SIZE || count % BITMAP_CHUNK_SIZE)
+		return -EINVAL;
+
+	*start = pos * BITS_PER_BYTE;

mm/page_idle.c static void page_idle_clear_pte_refs(struct page *page) · line 153

Quoted 10 lines
mm/page_idle.c +10 -0
+	if (*start >= max_frame)
+		return -ENXIO;
+
+	*end = *start + count * BITS_PER_BYTE;
+	if (*end > max_frame)
+		*end = max_frame;
+	return 0;
+}
+
+static bool page_really_idle(struct page *page)

Just minor:
Instead of creating new API, could we combine page_is_idle with introducing furthere argument pte_check?

    bool page_is_idle(struct page *page, bool pte_check);
Quoted 174 lines
mm/page_idle.c +107 -35
+{
+	if (!page)
+		return false;
+
+	if (page_is_idle(page)) {
+		/*
+		 * The page might have been referenced via a
+		 * pte, in which case it is not idle. Clear
+		 * refs and recheck.
+		 */
+		page_idle_clear_pte_refs(page);
+		if (page_is_idle(page))
+			return true;
+	}
+
+	return false;
+}
+
 static ssize_t page_idle_bitmap_read(struct file *file, struct kobject *kobj,
 				     struct bin_attribute *attr, char *buf,
 				     loff_t pos, size_t count)
@@ -125,35 +176,21 @@ static ssize_t page_idle_bitmap_read(struct file *file, struct kobject *kobj,
 	u64 *out = (u64 *)buf;
 	struct page *page;
 	unsigned long pfn, end_pfn;
-	int bit;
+	int bit, ret;
 
-	if (pos % BITMAP_CHUNK_SIZE || count % BITMAP_CHUNK_SIZE)
-		return -EINVAL;
-
-	pfn = pos * BITS_PER_BYTE;
-	if (pfn >= max_pfn)
-		return 0;
-
-	end_pfn = pfn + count * BITS_PER_BYTE;
-	if (end_pfn > max_pfn)
-		end_pfn = max_pfn;
+	ret = page_idle_get_frames(pos, count, NULL, &pfn, &end_pfn);
+	if (ret == -ENXIO)
+		return 0;  /* Reads beyond max_pfn do nothing */
+	else if (ret)
+		return ret;
 
 	for (; pfn < end_pfn; pfn++) {
 		bit = pfn % BITMAP_CHUNK_BITS;
 		if (!bit)
 			*out = 0ULL;
-		page = page_idle_get_page(pfn);
-		if (page) {
-			if (page_is_idle(page)) {
-				/*
-				 * The page might have been referenced via a
-				 * pte, in which case it is not idle. Clear
-				 * refs and recheck.
-				 */
-				page_idle_clear_pte_refs(page);
-				if (page_is_idle(page))
-					*out |= 1ULL << bit;
-			}
+		page = page_idle_get_page_pfn(pfn);
+		if (page && page_really_idle(page)) {
+			*out |= 1ULL << bit;
 			put_page(page);
 		}
 		if (bit == BITMAP_CHUNK_BITS - 1)
@@ -170,23 +207,16 @@ static ssize_t page_idle_bitmap_write(struct file *file, struct kobject *kobj,
 	const u64 *in = (u64 *)buf;
 	struct page *page;
 	unsigned long pfn, end_pfn;
-	int bit;
+	int bit, ret;
 
-	if (pos % BITMAP_CHUNK_SIZE || count % BITMAP_CHUNK_SIZE)
-		return -EINVAL;
-
-	pfn = pos * BITS_PER_BYTE;
-	if (pfn >= max_pfn)
-		return -ENXIO;
-
-	end_pfn = pfn + count * BITS_PER_BYTE;
-	if (end_pfn > max_pfn)
-		end_pfn = max_pfn;
+	ret = page_idle_get_frames(pos, count, NULL, &pfn, &end_pfn);
+	if (ret)
+		return ret;
 
 	for (; pfn < end_pfn; pfn++) {
 		bit = pfn % BITMAP_CHUNK_BITS;
 		if ((*in >> bit) & 1) {
-			page = page_idle_get_page(pfn);
+			page = page_idle_get_page_pfn(pfn);
 			if (page) {
 				page_idle_clear_pte_refs(page);
 				set_page_idle(page);
@@ -224,6 +254,226 @@ struct page_ext_operations page_idle_ops = {
 };
 #endif
 
+/*  page_idle tracking for /proc/<pid>/page_idle */
+
+struct page_node {
+	struct page *page;
+	unsigned long addr;
+	struct list_head list;
+};
+
+struct page_idle_proc_priv {
+	unsigned long start_addr;
+	char *buffer;
+	int write;
+
+	/* Pre-allocate and provide nodes to add_page_idle_list() */
+	struct page_node *page_nodes;
+	int cur_page_node;
+	struct list_head *idle_page_list;
+};
+
+/*
+ * Add a page to the idle page list. page can be NULL if pte is
+ * from a swapped page.
+ */
+static void add_page_idle_list(struct page *page,
+			       unsigned long addr, struct mm_walk *walk)
+{
+	struct page *page_get = NULL;
+	struct page_node *pn;
+	int bit;
+	unsigned long frames;
+	struct page_idle_proc_priv *priv = walk->private;
+	u64 *chunk = (u64 *)priv->buffer;
+
+	if (priv->write) {
+		/* Find whether this page was asked to be marked */
+		frames = (addr - priv->start_addr) >> PAGE_SHIFT;
+		bit = frames % BITMAP_CHUNK_BITS;
+		chunk = &chunk[frames / BITMAP_CHUNK_BITS];
+		if (((*chunk >> bit) & 1) == 0)
+			return;
+	}
+
+	if (page) {
+		page_get = page_idle_get_page(page);
+		if (!page_get)
+			return;
+	}
+
+	pn = &(priv->page_nodes[priv->cur_page_node++]);
+	pn->page = page_get;
+	pn->addr = addr;
+	list_add(&pn->list, priv->idle_page_list);
+}
+
+static int pte_page_idle_proc_range(pmd_t *pmd, unsigned long addr,
+				    unsigned long end,
+				    struct mm_walk *walk)
+{
+	struct vm_area_struct *vma = walk->vma;
+	pte_t *pte;
+	spinlock_t *ptl;
+	struct page *page;
+
+	ptl = pmd_trans_huge_lock(pmd, vma);
+	if (ptl) {
+		if (pmd_present(*pmd)) {
+			page = follow_trans_huge_pmd(vma, addr, pmd,
+						     FOLL_DUMP|FOLL_WRITE);
+			if (!IS_ERR_OR_NULL(page))
+				add_page_idle_list(page, addr, walk);
+		}
+		spin_unlock(ptl);
+		return 0;
+	}
+

mm/page_idle.c struct page_ext_operations page_idle_ops = { · line 341

Quoted 10 lines
mm/page_idle.c +10 -0
+	if (pmd_trans_unstable(pmd))
+		return 0;
+
+	pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl);
+	for (; addr != end; pte++, addr += PAGE_SIZE) {
+		/*
+		 * We add swapped pages to the idle_page_list so that we can
+		 * reported to userspace that they are idle.
+		 */
+		if (is_swap_pte(*pte)) {

I suggested "let's consider every swapped out pages as IDLE" but let's think about this case:

1. mark heap of the process as IDLE
2. process touch working set
3. process's heap pages are swap out by meory spike or madvise
4. heap profiler investigates the process's IDLE page and surprised all of heap are idle.

It's the good scenario for other purpose because non-idle pages(IOW, workingset) could be readahead when the app will restart.

Maybe, squeeze the idle bit in the swap pte to check it.

Quoted 68 lines
mm/page_idle.c +68 -0
+			add_page_idle_list(NULL, addr, walk);
+			continue;
+		}
+
+		if (!pte_present(*pte))
+			continue;
+
+		page = vm_normal_page(vma, addr, *pte);
+		if (page)
+			add_page_idle_list(page, addr, walk);
+	}
+
+	pte_unmap_unlock(pte - 1, ptl);
+	return 0;
+}
+
+ssize_t page_idle_proc_generic(struct file *file, char __user *ubuff,
+			       size_t count, loff_t *pos,
+			       struct task_struct *tsk, int write)
+{
+	int ret;
+	char *buffer;
+	u64 *out;
+	unsigned long start_addr, end_addr, start_frame, end_frame;
+	struct mm_struct *mm = file->private_data;
+	struct mm_walk walk = { .pmd_entry = pte_page_idle_proc_range, };
+	struct page_node *cur;
+	struct page_idle_proc_priv priv;
+	bool walk_error = false;
+	LIST_HEAD(idle_page_list);
+
+	if (!mm || !mmget_not_zero(mm))
+		return -EINVAL;
+
+	if (count > PAGE_SIZE)
+		count = PAGE_SIZE;
+
+	buffer = kzalloc(PAGE_SIZE, GFP_KERNEL);
+	if (!buffer) {
+		ret = -ENOMEM;
+		goto out_mmput;
+	}
+	out = (u64 *)buffer;
+
+	if (write && copy_from_user(buffer, ubuff, count)) {
+		ret = -EFAULT;
+		goto out;
+	}
+
+	ret = page_idle_get_frames(*pos, count, mm, &start_frame, &end_frame);
+	if (ret)
+		goto out;
+
+	start_addr = (start_frame << PAGE_SHIFT);
+	end_addr = (end_frame << PAGE_SHIFT);
+	priv.buffer = buffer;
+	priv.start_addr = start_addr;
+	priv.write = write;
+
+	priv.idle_page_list = &idle_page_list;
+	priv.cur_page_node = 0;
+	priv.page_nodes = kzalloc(sizeof(struct page_node) *
+				  (end_frame - start_frame), GFP_KERNEL);
+	if (!priv.page_nodes) {
+		ret = -ENOMEM;
+		goto out;
+	}
+

mm/page_idle.c struct page_ext_operations page_idle_ops = { · line 419

Quoted 10 lines
mm/page_idle.c +10 -0
+	walk.private = &priv;
+	walk.mm = mm;
+
+	down_read(&mm->mmap_sem);
+
+	/*
+	 * idle_page_list is needed because walk_page_vma() holds ptlock which
+	 * deadlocks with page_idle_clear_pte_refs(). So we have to collect all
+	 * pages first, and then call page_idle_clear_pte_refs().
+	 */

Thanks for the comment, I was curious why you want to have idle_page_list and the reason is here.

How about making this /proc/<pid>/page_idle per-process granuariy, unlike system level /sys/xxx/page_idle? What I meant is not to check rmap to see any reference from random process but just check only access from the target process. It would be more proper as /proc/ <pid>/ interface and good for per-process tracking as well as fast.

Quoted 62 lines
mm/page_idle.c +57 -0
+	ret = walk_page_range(start_addr, end_addr, &walk);
+	if (ret)
+		walk_error = true;
+
+	list_for_each_entry(cur, &idle_page_list, list) {
+		int bit, index;
+		unsigned long off;
+		struct page *page = cur->page;
+
+		if (unlikely(walk_error))
+			goto remove_page;
+
+		if (write) {
+			if (page) {
+				page_idle_clear_pte_refs(page);
+				set_page_idle(page);
+			}
+		} else {
+			if (!page || page_really_idle(page)) {
+				off = ((cur->addr) >> PAGE_SHIFT) - start_frame;
+				bit = off % BITMAP_CHUNK_BITS;
+				index = off / BITMAP_CHUNK_BITS;
+				out[index] |= 1ULL << bit;
+			}
+		}
+remove_page:
+		if (page)
+			put_page(page);
+	}
+
+	if (!write && !walk_error)
+		ret = copy_to_user(ubuff, buffer, count);
+
+	up_read(&mm->mmap_sem);
+	kfree(priv.page_nodes);
+out:
+	kfree(buffer);
+out_mmput:
+	mmput(mm);
+	if (!ret)
+		ret = count;
+	return ret;
+
+}
+
+ssize_t page_idle_proc_read(struct file *file, char __user *ubuff,
+			    size_t count, loff_t *pos, struct task_struct *tsk)
+{
+	return page_idle_proc_generic(file, ubuff, count, pos, tsk, 0);
+}
+
+ssize_t page_idle_proc_write(struct file *file, char __user *ubuff,
+			     size_t count, loff_t *pos, struct task_struct *tsk)
+{
+	return page_idle_proc_generic(file, ubuff, count, pos, tsk, 1);
+}
+
 static int __init page_idle_init(void)
 {
 	int err;
Signature · 1 line
2.22.0.709.g102302147b-goog
#7 lore raw
Quoted 8 lines · Minchan Kim

Hi Joel,

Quoted 5 lines · Joel Fernandes (Google)

The page_idle tracking feature currently requires looking up the pagemap for a process followed by interacting with /sys/kernel/mm/page_idle. Looking up PFN from pagemap in Android devices is not supported by unprivileged process and requires SYS_ADMIN and gives 0 for the PFN.

[snip]

Quoted 40 lines
Quoted 40 lines

index 77eb628ecc7f..a58dd74606e9 100644

fs/proc/base.c +3 -0
@@ -3021,6 +3021,9 @@ static const struct pid_entry tgid_base_stuff[] = {
 	REG("smaps",      S_IRUGO, proc_pid_smaps_operations),
 	REG("smaps_rollup", S_IRUGO, proc_pid_smaps_rollup_operations),
 	REG("pagemap",    S_IRUSR, proc_pagemap_operations),
+#ifdef CONFIG_IDLE_PAGE_TRACKING
+	REG("page_idle", S_IRUSR|S_IWUSR, proc_page_idle_operations),
+#endif
 #endif
 #ifdef CONFIG_SECURITY
 	DIR("attr",       S_IRUGO|S_IXUGO, proc_attr_dir_inode_operations, proc_attr_dir_operations),
fs/proc/internal.h +1 -0
index cd0c8d5ce9a1..bc9371880c63 100644
@@ -293,6 +293,7 @@ extern const struct file_operations proc_pid_smaps_operations;
 extern const struct file_operations proc_pid_smaps_rollup_operations;
 extern const struct file_operations proc_clear_refs_operations;
 extern const struct file_operations proc_pagemap_operations;
+extern const struct file_operations proc_page_idle_operations;
 
 extern unsigned long task_vsize(struct mm_struct *);
 extern unsigned long task_statm(struct mm_struct *,
fs/proc/task_mmu.c +7 -0
index 4d2b860dbc3f..11ccc53da38e 100644
@@ -1642,6 +1642,63 @@ const struct file_operations proc_pagemap_operations = {
 	.open		= pagemap_open,
 	.release	= pagemap_release,
 };
+
+#ifdef CONFIG_IDLE_PAGE_TRACKING
+static ssize_t proc_page_idle_read(struct file *file, char __user *buf,
+				   size_t count, loff_t *ppos)
+{
+	int ret;
+	struct task_struct *tsk = get_proc_task(file_inode(file));
Quoted 8 lines

fs/proc/task_mmu.c const struct file_operations proc_pagemap_operations = { · line 1656

Quoted 5 lines
fs/proc/task_mmu.c +5 -0
+
+	if (!tsk)
+		return -EINVAL;
+	ret = page_idle_proc_read(file, buf, count, ppos, tsk);
+	put_task_struct(tsk);

Why do you need task_struct here? You already got the task in open and got mm there so you could pass the MM here instead of task.

Good point, will just use mm.

[snip]

Quoted 36 lines
Quoted 36 lines
include/linux/page_idle.h +4 -0
index 1e894d34bdce..f1bc2640d85e 100644
@@ -106,6 +106,10 @@ static inline void clear_page_idle(struct page *page)
 }
 #endif /* CONFIG_64BIT */
 
+ssize_t page_idle_proc_write(struct file *file,
+	char __user *buf, size_t count, loff_t *ppos, struct task_struct *tsk);
+ssize_t page_idle_proc_read(struct file *file,
+	char __user *buf, size_t count, loff_t *ppos, struct task_struct *tsk);
 #else /* !CONFIG_IDLE_PAGE_TRACKING */
 
 static inline bool page_is_young(struct page *page)
mm/page_idle.c +6 -3
index 295512465065..86244f7f1faa 100644
@@ -5,12 +5,15 @@
 #include <linux/sysfs.h>
 #include <linux/kobject.h>
 #include <linux/mm.h>
-#include <linux/mmzone.h>
-#include <linux/pagemap.h>
-#include <linux/rmap.h>
 #include <linux/mmu_notifier.h>
+#include <linux/mmzone.h>
 #include <linux/page_ext.h>
 #include <linux/page_idle.h>
+#include <linux/pagemap.h>
+#include <linux/rmap.h>
+#include <linux/sched/mm.h>
+#include <linux/swap.h>
+#include <linux/swapops.h>
 
Quoted 14 lines

mm/page_idle.c line 32

Quoted 11 lines
mm/page_idle.c +1 -3
 #define BITMAP_CHUNK_SIZE	sizeof(u64)
 #define BITMAP_CHUNK_BITS	(BITMAP_CHUNK_SIZE * BITS_PER_BYTE)
@@ -25,18 +28,13 @@
  * page tracking. With such an indicator of user pages we can skip isolated
  * pages, but since there are not usually many of them, it will hardly affect
  * the overall result.
- *
- * This function tries to get a user memory page by pfn as described above.
  */
-static struct page *page_idle_get_page(unsigned long pfn)
+static struct page *page_idle_get_page(struct page *page_in)

Looks weird function name after you changed the argument. Maybe "bool check_valid_page(struct page *page)"?

I don't think so, this function does a get_page_unless_zero() on the page as well.

Quoted 16 lines
Quoted 16 lines
mm/page_idle.c +1 -4
 {
 	struct page *page;
 	pg_data_t *pgdat;
 
-	if (!pfn_valid(pfn))
-		return NULL;
-
-	page = pfn_to_page(pfn);
+	page = page_in;
 	if (!page || !PageLRU(page) ||
 	    !get_page_unless_zero(page))
 		return NULL;
@@ -51,6 +49,18 @@ static struct page *page_idle_get_page(unsigned long pfn)
 	return page;
 }
 
Quoted 6 lines

mm/page_idle.c static struct page *page_idle_get_page(unsigned long pfn) · line 55

Quoted 4 lines
mm/page_idle.c +4 -0
+/*
+ * This function tries to get a user memory page by pfn as described above.
+ */
+static struct page *page_idle_get_page_pfn(unsigned long pfn)

So we could use page_idle_get_page name here.

Based on above comment, I prefer to keep same name. Do you agree?

Quoted 29 lines
Quoted 29 lines
mm/page_idle.c +22 -0
+	return page_idle_get_page(pfn_to_page(pfn));
+}
+
 static bool page_idle_clear_pte_refs_one(struct page *page,
 					struct vm_area_struct *vma,
 					unsigned long addr, void *arg)
@@ -118,6 +128,47 @@ static void page_idle_clear_pte_refs(struct page *page)
 		unlock_page(page);
 }
 
+/* Helper to get the start and end frame given a pos and count */
+static int page_idle_get_frames(loff_t pos, size_t count, struct mm_struct *mm,
+				unsigned long *start, unsigned long *end)
+{
+	unsigned long max_frame;
+
+	/* If an mm is not given, assume we want physical frames */
+	max_frame = mm ? (mm->task_size >> PAGE_SHIFT) : max_pfn;
+
+	if (pos % BITMAP_CHUNK_SIZE || count % BITMAP_CHUNK_SIZE)
+		return -EINVAL;
+
+	*start = pos * BITS_PER_BYTE;
+	if (*start >= max_frame)
+		return -ENXIO;
+
+	*end = *start + count * BITS_PER_BYTE;
+	if (*end > max_frame)
+		*end = max_frame;
Quoted 8 lines

mm/page_idle.c static void page_idle_clear_pte_refs(struct page *page) · line 153

Quoted 4 lines
mm/page_idle.c +4 -0
+	return 0;
+}
+
+static bool page_really_idle(struct page *page)

Just minor:
Instead of creating new API, could we combine page_is_idle with introducing furthere argument pte_check?

I cannot see in the code where pte_check will be false when this is called? I could rename the function to page_idle_check_ptes() if that's Ok with you.

[snip]

Quoted 42 lines

+

Quoted 21 lines
mm/page_idle.c +21 -0
+static int pte_page_idle_proc_range(pmd_t *pmd, unsigned long addr,
+				    unsigned long end,
+				    struct mm_walk *walk)
+{
+	struct vm_area_struct *vma = walk->vma;
+	pte_t *pte;
+	spinlock_t *ptl;
+	struct page *page;
+
+	ptl = pmd_trans_huge_lock(pmd, vma);
+	if (ptl) {
+		if (pmd_present(*pmd)) {
+			page = follow_trans_huge_pmd(vma, addr, pmd,
+						     FOLL_DUMP|FOLL_WRITE);
+			if (!IS_ERR_OR_NULL(page))
+				add_page_idle_list(page, addr, walk);
+		}
+		spin_unlock(ptl);
+		return 0;
+	}
+

mm/page_idle.c struct page_ext_operations page_idle_ops = { · line 341

Quoted 10 lines
mm/page_idle.c +10 -0
+	if (pmd_trans_unstable(pmd))
+		return 0;
+
+	pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl);
+	for (; addr != end; pte++, addr += PAGE_SIZE) {
+		/*
+		 * We add swapped pages to the idle_page_list so that we can
+		 * reported to userspace that they are idle.
+		 */
+		if (is_swap_pte(*pte)) {

I suggested "let's consider every swapped out pages as IDLE" but let's think about this case:

1. mark heap of the process as IDLE
2. process touch working set
3. process's heap pages are swap out by meory spike or madvise
4. heap profiler investigates the process's IDLE page and surprised all of heap are idle.

Quoted 4 lines

It's the good scenario for other purpose because non-idle pages(IOW, workingset) could be readahead when the app will restart.

Maybe, squeeze the idle bit in the swap pte to check it.

Ok, I will look more into this. Konstantin had similar ideas here too.

Quoted 66 lines
Quoted 52 lines
mm/page_idle.c +52 -0
+ssize_t page_idle_proc_generic(struct file *file, char __user *ubuff,
+			       size_t count, loff_t *pos,
+			       struct task_struct *tsk, int write)
+{
+	int ret;
+	char *buffer;
+	u64 *out;
+	unsigned long start_addr, end_addr, start_frame, end_frame;
+	struct mm_struct *mm = file->private_data;
+	struct mm_walk walk = { .pmd_entry = pte_page_idle_proc_range, };
+	struct page_node *cur;
+	struct page_idle_proc_priv priv;
+	bool walk_error = false;
+	LIST_HEAD(idle_page_list);
+
+	if (!mm || !mmget_not_zero(mm))
+		return -EINVAL;
+
+	if (count > PAGE_SIZE)
+		count = PAGE_SIZE;
+
+	buffer = kzalloc(PAGE_SIZE, GFP_KERNEL);
+	if (!buffer) {
+		ret = -ENOMEM;
+		goto out_mmput;
+	}
+	out = (u64 *)buffer;
+
+	if (write && copy_from_user(buffer, ubuff, count)) {
+		ret = -EFAULT;
+		goto out;
+	}
+
+	ret = page_idle_get_frames(*pos, count, mm, &start_frame, &end_frame);
+	if (ret)
+		goto out;
+
+	start_addr = (start_frame << PAGE_SHIFT);
+	end_addr = (end_frame << PAGE_SHIFT);
+	priv.buffer = buffer;
+	priv.start_addr = start_addr;
+	priv.write = write;
+
+	priv.idle_page_list = &idle_page_list;
+	priv.cur_page_node = 0;
+	priv.page_nodes = kzalloc(sizeof(struct page_node) *
+				  (end_frame - start_frame), GFP_KERNEL);
+	if (!priv.page_nodes) {
+		ret = -ENOMEM;
+		goto out;
+	}
+

mm/page_idle.c struct page_ext_operations page_idle_ops = { · line 419

Quoted 10 lines
mm/page_idle.c +10 -0
+	walk.private = &priv;
+	walk.mm = mm;
+
+	down_read(&mm->mmap_sem);
+
+	/*
+	 * idle_page_list is needed because walk_page_vma() holds ptlock which
+	 * deadlocks with page_idle_clear_pte_refs(). So we have to collect all
+	 * pages first, and then call page_idle_clear_pte_refs().
+	 */

Thanks for the comment, I was curious why you want to have idle_page_list and the reason is here.

Quoted 6 lines

How about making this /proc/<pid>/page_idle per-process granuariy, unlike system level /sys/xxx/page_idle? What I meant is not to check rmap to see any reference from random process but just check only access from the target process. It would be more proper as /proc/ <pid>/ interface and good for per-process tracking as well as fast.

I prefer not to do this for the following reasons:
(1) It makes a feature lost, now accesses to shared pages will not be accounted properly.

(2) It makes it inconsistent with other idle page tracking mechanism. I prefer if post per-process. At the heart of it, the tracking is always at the physical page level -- I feel that is how it should be. Other drawback, is also we have to document this subtlety.

Another reason is the performance is pretty good already with this mechanism with rmap. I did idle tracking on 512MB range in about 15ms for read and 15ms for write.

In the future if it is an issue, we can consider it.

thanks,

- Joel

#8 lore raw

Hi Joel,

Quoted 33 lines · Joel Fernandes
Quoted 5 lines

mm/page_idle.c line 32

Quoted 2 lines
mm/page_idle.c +1 -1
-static struct page *page_idle_get_page(unsigned long pfn)
+static struct page *page_idle_get_page(struct page *page_in)

Looks weird function name after you changed the argument. Maybe "bool check_valid_page(struct page *page)"?

I don't think so, this function does a get_page_unless_zero() on the page as well.

Quoted 16 lines
Quoted 16 lines

{

mm/page_idle.c +1 -4
 	struct page *page;
 	pg_data_t *pgdat;
 
-	if (!pfn_valid(pfn))
-		return NULL;
-
-	page = pfn_to_page(pfn);
+	page = page_in;
 	if (!page || !PageLRU(page) ||
 	    !get_page_unless_zero(page))
 		return NULL;
@@ -51,6 +49,18 @@ static struct page *page_idle_get_page(unsigned long pfn)
 	return page;
 }
 
Quoted 6 lines

mm/page_idle.c static struct page *page_idle_get_page(unsigned long pfn) · line 55

Quoted 4 lines
mm/page_idle.c +4 -0
+/*
+ * This function tries to get a user memory page by pfn as described above.
+ */
+static struct page *page_idle_get_page_pfn(unsigned long pfn)

So we could use page_idle_get_page name here.

Quoted 1 line

Based on above comment, I prefer to keep same name. Do you agree?

Yes, I agree. Just please add a comment about refcount in the description on page_idle_get_page.

Quoted 41 lines
Quoted 31 lines
Quoted 31 lines
mm/page_idle.c +22 -0
+	return page_idle_get_page(pfn_to_page(pfn));
+}
+
 static bool page_idle_clear_pte_refs_one(struct page *page,
 					struct vm_area_struct *vma,
 					unsigned long addr, void *arg)
@@ -118,6 +128,47 @@ static void page_idle_clear_pte_refs(struct page *page)
 		unlock_page(page);
 }
 
+/* Helper to get the start and end frame given a pos and count */
+static int page_idle_get_frames(loff_t pos, size_t count, struct mm_struct *mm,
+				unsigned long *start, unsigned long *end)
+{
+	unsigned long max_frame;
+
+	/* If an mm is not given, assume we want physical frames */
+	max_frame = mm ? (mm->task_size >> PAGE_SHIFT) : max_pfn;
+
+	if (pos % BITMAP_CHUNK_SIZE || count % BITMAP_CHUNK_SIZE)
+		return -EINVAL;
+
+	*start = pos * BITS_PER_BYTE;
+	if (*start >= max_frame)
+		return -ENXIO;
+
+	*end = *start + count * BITS_PER_BYTE;
+	if (*end > max_frame)
+		*end = max_frame;
Quoted 8 lines

mm/page_idle.c static void page_idle_clear_pte_refs(struct page *page) · line 153

Quoted 4 lines
mm/page_idle.c +4 -0
+	return 0;
+}
+
+static bool page_really_idle(struct page *page)

Just minor:
Instead of creating new API, could we combine page_is_idle with introducing furthere argument pte_check?

Quoted 2 lines

I cannot see in the code where pte_check will be false when this is called? I could rename the function to page_idle_check_ptes() if that's Ok with you.

What I don't like is _*really*_ part of the funcion name.

I see several page_is_idle calls in huge_memory.c, migration.c, swap.c. They could just check only page flag so they could use "false" with pte_check.

< snip >

Quoted 74 lines
Quoted 66 lines
Quoted 52 lines
mm/page_idle.c +52 -0
+ssize_t page_idle_proc_generic(struct file *file, char __user *ubuff,
+			       size_t count, loff_t *pos,
+			       struct task_struct *tsk, int write)
+{
+	int ret;
+	char *buffer;
+	u64 *out;
+	unsigned long start_addr, end_addr, start_frame, end_frame;
+	struct mm_struct *mm = file->private_data;
+	struct mm_walk walk = { .pmd_entry = pte_page_idle_proc_range, };
+	struct page_node *cur;
+	struct page_idle_proc_priv priv;
+	bool walk_error = false;
+	LIST_HEAD(idle_page_list);
+
+	if (!mm || !mmget_not_zero(mm))
+		return -EINVAL;
+
+	if (count > PAGE_SIZE)
+		count = PAGE_SIZE;
+
+	buffer = kzalloc(PAGE_SIZE, GFP_KERNEL);
+	if (!buffer) {
+		ret = -ENOMEM;
+		goto out_mmput;
+	}
+	out = (u64 *)buffer;
+
+	if (write && copy_from_user(buffer, ubuff, count)) {
+		ret = -EFAULT;
+		goto out;
+	}
+
+	ret = page_idle_get_frames(*pos, count, mm, &start_frame, &end_frame);
+	if (ret)
+		goto out;
+
+	start_addr = (start_frame << PAGE_SHIFT);
+	end_addr = (end_frame << PAGE_SHIFT);
+	priv.buffer = buffer;
+	priv.start_addr = start_addr;
+	priv.write = write;
+
+	priv.idle_page_list = &idle_page_list;
+	priv.cur_page_node = 0;
+	priv.page_nodes = kzalloc(sizeof(struct page_node) *
+				  (end_frame - start_frame), GFP_KERNEL);
+	if (!priv.page_nodes) {
+		ret = -ENOMEM;
+		goto out;
+	}
+

mm/page_idle.c struct page_ext_operations page_idle_ops = { · line 419

Quoted 10 lines
mm/page_idle.c +10 -0
+	walk.private = &priv;
+	walk.mm = mm;
+
+	down_read(&mm->mmap_sem);
+
+	/*
+	 * idle_page_list is needed because walk_page_vma() holds ptlock which
+	 * deadlocks with page_idle_clear_pte_refs(). So we have to collect all
+	 * pages first, and then call page_idle_clear_pte_refs().
+	 */

Thanks for the comment, I was curious why you want to have idle_page_list and the reason is here.

Quoted 6 lines

How about making this /proc/<pid>/page_idle per-process granuariy, unlike system level /sys/xxx/page_idle? What I meant is not to check rmap to see any reference from random process but just check only access from the target process. It would be more proper as /proc/ <pid>/ interface and good for per-process tracking as well as fast.

Quoted 3 lines

I prefer not to do this for the following reasons:
(1) It makes a feature lost, now accesses to shared pages will not be accounted properly.

Do you really want to check global attribute by per-process interface? That would be doable with existing idle page tracking feature and that's the one of reasons page idle tracking was born(e.g. even, page cache for non-mapped) unlike clear_refs.
Once we create a new interface by per-process, just checking the process -granuariy access check sounds more reasonable to me.

With that, we could catch only idle pages of the target process even though the page was touched by several other processes.
If the user want to know global level access point, they could use exisint interface(If there is a concern(e.g., security) to use existing idle page tracking, let's discuss it as other topic how we could make existing feature more useful).

IOW, my point is that we already have global access check(1. from ptes among several processes, 2. from page flag for non-mapped pages) feature from from existing idle page tracking interface and now we are about to create new interface for per-process wise so I wanted to create a particular feature which cannot be covered by existing iterface.

Quoted 2 lines

(2) It makes it inconsistent with other idle page tracking mechanism. I

That's the my comment to create different idle page tracking we couldn't do with existing interface.

Quoted 1 line

prefer if post per-process. At the heart of it, the tracking is always at the

What does it mean "post per-process"?

Quoted 2 lines

physical page level -- I feel that is how it should be. Other drawback, is also we have to document this subtlety.

Sorry, Could you elaborate it a bit?

#9 lore raw
Quoted 1 line · Minchan Kim

Hi Joel,

Hi Minchan,

Quoted 34 lines · Joel Fernandes
Quoted 33 lines
Quoted 5 lines

mm/page_idle.c line 32

Quoted 2 lines
mm/page_idle.c +1 -1
-static struct page *page_idle_get_page(unsigned long pfn)
+static struct page *page_idle_get_page(struct page *page_in)

Looks weird function name after you changed the argument. Maybe "bool check_valid_page(struct page *page)"?

I don't think so, this function does a get_page_unless_zero() on the page as well.

Quoted 22 lines
Quoted 13 lines

{

mm/page_idle.c +1 -4
 	struct page *page;
 	pg_data_t *pgdat;
 
-	if (!pfn_valid(pfn))
-		return NULL;
-
-	page = pfn_to_page(pfn);
+	page = page_in;
 	if (!page || !PageLRU(page) ||
 	    !get_page_unless_zero(page))
 		return NULL;

mm/page_idle.c static struct page *page_idle_get_page(unsigned long pfn) · line 55

Quoted 7 lines
mm/page_idle.c +4 -0
@@ -51,6 +49,18 @@ static struct page *page_idle_get_page(unsigned long pfn)
 	return page;
 }
 
+/*
+ * This function tries to get a user memory page by pfn as described above.
+ */
+static struct page *page_idle_get_page_pfn(unsigned long pfn)

So we could use page_idle_get_page name here.

Quoted 4 lines
Quoted 1 line

Based on above comment, I prefer to keep same name. Do you agree?

Yes, I agree. Just please add a comment about refcount in the description on page_idle_get_page.

Ok.

Quoted 39 lines
Quoted 39 lines
Quoted 37 lines
Quoted 23 lines
mm/page_idle.c +16 -0
+	return page_idle_get_page(pfn_to_page(pfn));
+}
+
 static bool page_idle_clear_pte_refs_one(struct page *page,
 					struct vm_area_struct *vma,
 					unsigned long addr, void *arg)
@@ -118,6 +128,47 @@ static void page_idle_clear_pte_refs(struct page *page)
 		unlock_page(page);
 }
 
+/* Helper to get the start and end frame given a pos and count */
+static int page_idle_get_frames(loff_t pos, size_t count, struct mm_struct *mm,
+				unsigned long *start, unsigned long *end)
+{
+	unsigned long max_frame;
+
+	/* If an mm is not given, assume we want physical frames */
+	max_frame = mm ? (mm->task_size >> PAGE_SHIFT) : max_pfn;
+
+	if (pos % BITMAP_CHUNK_SIZE || count % BITMAP_CHUNK_SIZE)
+		return -EINVAL;
+
+	*start = pos * BITS_PER_BYTE;

mm/page_idle.c static void page_idle_clear_pte_refs(struct page *page) · line 153

Quoted 10 lines
mm/page_idle.c +10 -0
+	if (*start >= max_frame)
+		return -ENXIO;
+
+	*end = *start + count * BITS_PER_BYTE;
+	if (*end > max_frame)
+		*end = max_frame;
+	return 0;
+}
+
+static bool page_really_idle(struct page *page)

Just minor:
Instead of creating new API, could we combine page_is_idle with introducing furthere argument pte_check?

Quoted 7 lines
Quoted 2 lines

I cannot see in the code where pte_check will be false when this is called? I could rename the function to page_idle_check_ptes() if that's Ok with you.

What I don't like is _*really*_ part of the funcion name.

I see several page_is_idle calls in huge_memory.c, migration.c, swap.c. They could just check only page flag so they could use "false" with pte_check.

I will rename it to page_idle_check_ptes(). If you want pte_check argument, that can be a later patch if/when there are other users for it in other files. Hope that's reasonable.

Quoted 74 lines
Quoted 74 lines
Quoted 72 lines
Quoted 52 lines
mm/page_idle.c +52 -0
+ssize_t page_idle_proc_generic(struct file *file, char __user *ubuff,
+			       size_t count, loff_t *pos,
+			       struct task_struct *tsk, int write)
+{
+	int ret;
+	char *buffer;
+	u64 *out;
+	unsigned long start_addr, end_addr, start_frame, end_frame;
+	struct mm_struct *mm = file->private_data;
+	struct mm_walk walk = { .pmd_entry = pte_page_idle_proc_range, };
+	struct page_node *cur;
+	struct page_idle_proc_priv priv;
+	bool walk_error = false;
+	LIST_HEAD(idle_page_list);
+
+	if (!mm || !mmget_not_zero(mm))
+		return -EINVAL;
+
+	if (count > PAGE_SIZE)
+		count = PAGE_SIZE;
+
+	buffer = kzalloc(PAGE_SIZE, GFP_KERNEL);
+	if (!buffer) {
+		ret = -ENOMEM;
+		goto out_mmput;
+	}
+	out = (u64 *)buffer;
+
+	if (write && copy_from_user(buffer, ubuff, count)) {
+		ret = -EFAULT;
+		goto out;
+	}
+
+	ret = page_idle_get_frames(*pos, count, mm, &start_frame, &end_frame);
+	if (ret)
+		goto out;
+
+	start_addr = (start_frame << PAGE_SHIFT);
+	end_addr = (end_frame << PAGE_SHIFT);
+	priv.buffer = buffer;
+	priv.start_addr = start_addr;
+	priv.write = write;
+
+	priv.idle_page_list = &idle_page_list;
+	priv.cur_page_node = 0;
+	priv.page_nodes = kzalloc(sizeof(struct page_node) *
+				  (end_frame - start_frame), GFP_KERNEL);
+	if (!priv.page_nodes) {
+		ret = -ENOMEM;
+		goto out;
+	}
+

mm/page_idle.c struct page_ext_operations page_idle_ops = { · line 419

Quoted 10 lines
mm/page_idle.c +10 -0
+	walk.private = &priv;
+	walk.mm = mm;
+
+	down_read(&mm->mmap_sem);
+
+	/*
+	 * idle_page_list is needed because walk_page_vma() holds ptlock which
+	 * deadlocks with page_idle_clear_pte_refs(). So we have to collect all
+	 * pages first, and then call page_idle_clear_pte_refs().
+	 */

Thanks for the comment, I was curious why you want to have idle_page_list and the reason is here.

How about making this /proc/<pid>/page_idle per-process granuariy, unlike system level /sys/xxx/page_idle? What I meant is not to check rmap to see any reference from random process but just check only access from the target process. It would be more proper as /proc/ <pid>/ interface and good for per-process tracking as well as fast.

Quoted 5 lines
Quoted 3 lines

I prefer not to do this for the following reasons:
(1) It makes a feature lost, now accesses to shared pages will not be accounted properly.

Do you really want to check global attribute by per-process interface?

Pages are inherrently not per-process, they are global. A page does not necessarily belong to a process. An anonymous page can be shared. We are operating on pages in the end of the day.

I think you are confusing the per-process file interface with the core mechanism. The core mechanism always operations on physical PAGES.

Quoted 3 lines

That would be doable with existing idle page tracking feature and that's the one of reasons page idle tracking was born(e.g. even, page cache for non-mapped) unlike clear_refs.

I think you are misunderstanding the patch, the patch does not want to change the core mechanism. That is a bit out of scope for the patch. Page idle-tracking at the core of it looks at PTE of all processes. We are just using the VFN (virtual frame) interface to skip the need for separate pagemap look up -- that's it.

Quoted 2 lines

Once we create a new interface by per-process, just checking the process -granuariy access check sounds more reasonable to me.

It sounds reasonable but there is no reason to not do the full and proper page tracking for now, including shared pages. Otherwise it makes it inconsistent with the existing mechanism and can confuse the user about what to expect (especially for shared pages).

Quoted 7 lines

With that, we could catch only idle pages of the target process even though the page was touched by several other processes.
If the user want to know global level access point, they could use exisint interface(If there is a concern(e.g., security) to use existing idle page tracking, let's discuss it as other topic how we could make existing feature more useful).

Quoted 5 lines

IOW, my point is that we already have global access check(1. from ptes among several processes, 2. from page flag for non-mapped pages) feature from from existing idle page tracking interface and now we are about to create new interface for per-process wise so I wanted to create a particular feature which cannot be covered by existing iterface.

Yes, it sounds like you want to create a different feature. Then that can be a follow-up different patch, and that is out of scope for this patch.

Quoted 4 lines
Quoted 1 line

(2) It makes it inconsistent with other idle page tracking mechanism. I

That's the my comment to create different idle page tracking we couldn't do with existing interface.

Yes, sure. But that can be a different patch and we can weigh the benefits of it at that time. I don't want to introduce a new page tracking mechanism, I am just trying to reuse the existing one.

Quoted 3 lines
Quoted 1 line

prefer if post per-process. At the heart of it, the tracking is always at the

What does it mean "post per-process"?

Sorry it was a typo, I meant "the core mechanism should not be a per-process one, but a global one". We are just changing the interface in this patch, we are not changing the existing core mechanism. That gives us all the benefits of the existing code such as non-interference with page reclaim code, without introducing any new bugs. By the way I did fix a bug in the existing original code as well!

Quoted 4 lines
Quoted 2 lines

physical page level -- I feel that is how it should be. Other drawback, is also we have to document this subtlety.

Sorry, Could you elaborate it a bit?

I meant, with a new mechanism as the one you are proposing, we have to document that now shared pages will not be tracked properly. That is a 'subtle difference' and will have to be documented appropriated in the 'internals' section of the idle page tracking document.

thanks,

- Joel