ARM: da850-evm: Remove duplicate UART initialization
PATCH 1/1 ARM: da850-evm: Remove duplicate UART initialization
The Low Level init functions start the UART, so it doesn't need to happen during board_init. This patch removes it from board_init.
Signed-off-by Adam Ford <[email protected]>
board/davinci/da8xxevm/da850evm.c +0 -5
@@ -368,11 +368,6 @@ int board_init(void)davinci_emac_mii_mode_sel (HAS_RMII );#endif /* CONFIG_DRIVER_TI_EMAC */ -/* enable the console UART */ -writel ((DAVINCI_UART_PWREMU_MGMT_FREE |DAVINCI_UART_PWREMU_MGMT_URRST | -DAVINCI_UART_PWREMU_MGMT_UTRST ), - &davinci_uart2_ctrl_regs->pwremu_mgmt); -return 0 ; }
Signature · 1 line
2.17.1
PATCH 1/1 ARM: da850-evm: Remove duplicate UART initialization
board/davinci/da8xxevm/da850evm.c
Quoted 8 lines · Adam Ford
The Low Level init functions start the UART, so it doesn't need to happen during
board_init. This patch removes it fromboard_init.Signed-off-by Adam Ford <[email protected]>board/davinci/da8xxevm/da850evm.c +0
-0
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190728/e218248f/attachment.sig>