amlogic: add support for the SEI Robotic SEI510
Subsystems (3)
cover amlogic: add support for the SEI Robotic SEI510
The SEI510 board is based on the Amlogic S905X2 SoC from the Amlogic G12A SoC family.
The board has the following specifications :
- Amlogic S905X2 ARM Cortex-A53 quad-core SoC
- XGB DDR4 SDRAM
- 10/100 Ethernet (Internal PHY)
- 1 x USB 3.0 Host
- eMMC
- SDcard
- Infrared receiver
- SDIO WiFi Module
The board default behaviour is for booting Android and triggers fastboot on recovery or reboot mode.
Jerome Brunet (1):
boards: meson: add g12a sei510
Neil Armstrong (4):
ARM: dts: Import Amlogic G12A SEI510 DT from Linux 5.3-rc1
configs: meson64: permit redefining ENV_SIZE
ARM: meson: Add support for fastboot_set_reboot_flag()
configs: sei510: disable PSCI_RESET to support fastboot reboot_flag
arch/arm/dts/Makefile | 1 + arch/arm/dts/meson-g12a-sei510.dts | 502 +++++++++++++++++++++++++++ arch/arm/include/asm/arch-meson/sm.h | 18 + arch/arm/mach-meson/board-common.c | 33 ++ arch/arm/mach-meson/sm.c | 155 +++++++++ board/amlogic/sei510/MAINTAINERS | 5 + board/amlogic/sei510/Makefile | 6 + board/amlogic/sei510/README | 123 +++++++ board/amlogic/sei510/sei510.c | 26 ++ configs/sei510_defconfig | 75 ++++ include/configs/meson64.h | 2 + include/configs/sei510.h | 137 ++++++++ 12 files changed, 1083 insertions(+) create mode 100644 arch/arm/dts/meson-g12a-sei510.dts create mode 100644 board/amlogic/sei510/MAINTAINERS create mode 100644 board/amlogic/sei510/Makefile create mode 100644 board/amlogic/sei510/README create mode 100644 board/amlogic/sei510/sei510.c create mode 100644 configs/sei510_defconfig create mode 100644 include/configs/sei510.h
Signature · 1 line
2.22.0
PATCH 1/5 ARM: dts: Import Amlogic G12A SEI510 DT from Linux 5.3-rc1
Import Linux 5.2-rc1 sei510 DT from 5f9e832c1370 ("Linus 5.3-rc1") for the meson-g12a-sei510 board.
--- arch/arm/dts/Makefile | 1 + arch/arm/dts/meson-g12a-sei510.dts | 502 +++++++++++++++++++++++++++++ 2 files changed, 503 insertions(+) create mode 100644 arch/arm/dts/meson-g12a-sei510.dts
arch/arm/dts/Makefile +1 -0
@@ -136,6 +136,7 @@ dtb-$(CONFIG_ARCH_MESON) += \ meson-gxm-khadas-vim2.dtb \ meson-axg-s400.dtb \ meson-g12a-u200.dtb \ + meson-g12a-sei510.dtb \ meson-g12b-odroid-n2.dtb dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \ tegra20-medcom-wide.dtb \
arch/arm/dts/meson-g12a-sei510.dts new file +502 -0
502 lines not on this page · raw message
Signature · 1 line
2.22.0
PATCH 2/5 configs: meson64: permit redefining ENV_SIZE
In reply to Neil ArmstrongPermit redefining ENV_SIZE for board specific configs.
--- include/configs/meson64.h | 2 ++ 1 file changed, 2 insertions(+)
include/configs/meson64.h +2 -0
@@ -38,7 +38,9 @@#define CONFIG_CPU_ARMV8 #define CONFIG_REMAKE_ELF +#ifndef CONFIG_ENV_SIZE #define CONFIG_ENV_SIZE 0x2000 +#endif #define CONFIG_SYS_MAXARGS 32#define CONFIG_SYS_MALLOC_LEN (32 << 20)#define CONFIG_SYS_CBSIZE 1024
Signature · 1 line
2.22.0
PATCH 3/5 boards: meson: add g12a sei510
In reply to Neil ArmstrongFrom: Jerome Brunet <[email protected]>
The SEI510 board is based on the Amlogic S905X2 SoC from the Amlogic G12A SoC family.
The board has the following specifications :
- Amlogic S905X2 ARM Cortex-A53 quad-core SoC
- XGB DDR4 SDRAM
- 10/100 Ethernet (Internal PHY)
- 1 x USB 3.0 Host
- eMMC
- SDcard
- Infrared receiver
- SDIO WiFi Module
The board default behaviour is for booting Android and triggers fastboot on recovery or reboot mode.
USB vendor ID (used by fastboot) is 0x18d1 (Google) for default udev rules for existing android users work out of the box.
--- arch/arm/include/asm/arch-meson/sm.h | 18 ++++ arch/arm/mach-meson/sm.c | 155 +++++++++++++++++++++++++++ board/amlogic/sei510/MAINTAINERS | 5 + board/amlogic/sei510/Makefile | 6 ++ board/amlogic/sei510/README | 123 +++++++++++++++++++++ board/amlogic/sei510/sei510.c | 26 +++++ configs/sei510_defconfig | 74 +++++++++++++ include/configs/sei510.h | 137 +++++++++++++++++++++++ 8 files changed, 544 insertions(+) create mode 100644 board/amlogic/sei510/MAINTAINERS create mode 100644 board/amlogic/sei510/Makefile create mode 100644 board/amlogic/sei510/README create mode 100644 board/amlogic/sei510/sei510.c create mode 100644 configs/sei510_defconfig create mode 100644 include/configs/sei510.h
arch/arm/include/asm/arch-meson/sm.h +18 -0
@@ -6,7 +6,25 @@#ifndef __MESON_SM_H__#define __MESON_SM_H__ +enum { +REBOOT_REASON_COLD =0 , +REBOOT_REASON_NORMAL =1 , +REBOOT_REASON_RECOVERY =2 , +REBOOT_REASON_UPDATE =3 , +REBOOT_REASON_FASTBOOT =4 , +REBOOT_REASON_SUSPEND_OFF =5 , +REBOOT_REASON_HIBERNATE =6 , +REBOOT_REASON_BOOTLOADER =7 , +REBOOT_REASON_SHUTDOWN_REBOOT =8 , +REBOOT_REASON_RPMBP =9 , +REBOOT_REASON_CRASH_DUMP =11 , +REBOOT_REASON_KERNEL_PANIC =12 , +REBOOT_REASON_WATCHDOG_REBOOT =13 , +}; +ssize_t meson_sm_read_efuse (uintptr_t offset,void *buffer,size_t size); +int meson_sm_get_serial (void *buffer,size_t size); +int meson_sm_get_reboot_reason (void );#define SM_SERIAL_SIZE 12
arch/arm/mach-meson/sm.c +155 -0
164 lines not on this page · raw message
board/amlogic/sei510/MAINTAINERS new file +5 -0
@@ -0,0 +1,5 @@ +U200 +M: Neil Armstrong <[email protected]> +S: Maintained +F: board/amlogic/sei510/ +F: configs/sei510_defconfig
board/amlogic/sei510/Makefile new file +6 -0
@@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2016 BayLibre, SAS +# Author: Neil Armstrong <[email protected]> + +obj-y := sei510.o
board/amlogic/sei510/README new file +123 -0
123 lines not on this page · raw message
board/amlogic/sei510/sei510.c new file +26 -0
@@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (C) 2016 BayLibre, SAS +* Author: Neil Armstrong <[email protected]> +*/ + +#include <common.h> +#include <dm.h> +#include <environment.h> +#include <asm/io.h> +#include <asm/arch/axg.h> +#include <asm/arch/sm.h> +#include <asm/arch/eth.h> +#include <asm/arch/mem.h> + +int misc_init_r (void ) +{ +meson_eth_init (PHY_INTERFACE_MODE_RMII , +MESON_USE_INTERNAL_RMII_PHY ); + +meson_generate_serial_ethaddr (); + +env_set ("serial#" ,"AMLG12ASEI510" ); + +return 0 ; +}
configs/sei510_defconfig new file +74 -0
74 lines not on this page · raw message
include/configs/sei510.h new file +137 -0
137 lines not on this page · raw message
Signature · 1 line
2.22.0
PATCH 4/5 ARM: meson: Add support for fastboot_set_reboot_flag()
In reply to Neil ArmstrongAdd support for fastboot_set_reboot_flag() by storing the reboot flag in the common code to be used by the custom PSCI reboot handler.
--- arch/arm/mach-meson/board-common.c | 33 ++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+)
arch/arm/mach-meson/board-common.c +33 -0
@@ -14,6 +14,11 @@#include <asm/unaligned.h> #include <efi_loader.h> +#if CONFIG_IS_ENABLED (FASTBOOT ) +#include <asm/psci.h> +#include <fastboot.h> +#endif +DECLARE_GLOBAL_DATA_PTR ;__weak int board_init (void )
@@ -142,7 +147,35 @@ int board_late_init(void)return meson_board_late_init (); } +#if CONFIG_IS_ENABLED (FASTBOOT ) +static unsigned int reboot_reason =REBOOT_REASON_NORMAL ; + +int fastboot_set_reboot_flag () +{ + reboot_reason =REBOOT_REASON_BOOTLOADER ; + +printf ("Using reboot reason: 0x%x\n" , reboot_reason); + +return 0 ; +} + +void reset_cpu (ulong addr) +{ +struct pt_regs regs; + + regs.regs[0 ] =ARM_PSCI_0_2_FN_SYSTEM_RESET ; + regs.regs[1 ] = reboot_reason; + +printf ("Rebooting with reason: 0x%lx\n" , regs.regs[1 ]); + +smc_call (®s); + +while (1 ) + ; +} +#else void reset_cpu (ulong addr) {psci_system_reset (); } +#endif
Signature · 1 line
2.22.0
PATCH 5/5 configs: sei510: disable PSCI_RESET to support fastboot reboot_flag
In reply to Neil ArmstrongDisable the PSCI_RESET reboot handler to permit handling the reboot flag and calling the PSCI handler with the flag in parameter.
--- configs/sei510_defconfig | 1 + 1 file changed, 1 insertion(+)
configs/sei510_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_MESON_G12A=y CONFIG_DEBUG_UART_BASE=0xff803000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" sei510" +# CONFIG_PSCI_RESET is not set CONFIG_DEBUG_UART=y CONFIG_NR_DRAM_BANKS=1 CONFIG_OF_BOARD_SETUP=y
Signature · 1 line
2.22.0
cover amlogic: add support for the SEI Robotic SEI510
In reply to Neil ArmstrongQuoted 37 lines · Neil Armstrong
The SEI510 board is based on the Amlogic S905X2 SoC from the Amlogic G12A SoC family.
The board has the following specifications :
- Amlogic S905X2 ARM Cortex-A53 quad-core SoC
- XGB DDR4 SDRAM
- 10/100 Ethernet (Internal PHY)
- 1 x USB 3.0 Host
- eMMC
- SDcard
- Infrared receiver
- SDIO WiFi ModuleThe board default behaviour is for booting Android and triggers fastboot on recovery or reboot mode.
Jerome Brunet (1):
boards: meson: add g12a sei510Neil Armstrong (4):
ARM: dts: Import Amlogic G12A SEI510 DT from Linux 5.3-rc1
configs: meson64: permit redefiningENV_SIZE
ARM: meson: Add support forfastboot_set_reboot_flag()
configs: sei510: disablePSCI_RESETto support fastbootreboot_flagarch/arm/dts/Makefile | 1 + arch/arm/dts/meson-g12a-sei510.dts | 502 +++++++++++++++++++++++++++ arch/arm/include/asm/arch-meson/sm.h | 18 + arch/arm/mach-meson/board-common.c | 33 ++ arch/arm/mach-meson/sm.c | 155 +++++++++ board/amlogic/sei510/MAINTAINERS | 5 + board/amlogic/sei510/Makefile | 6 + board/amlogic/sei510/README | 123 +++++++ board/amlogic/sei510/sei510.c | 26 ++ configs/sei510_defconfig | 75 ++++ include/configs/meson64.h | 2 + include/configs/sei510.h | 137 ++++++++
Quoted 9 lines
12 files changed, 1083 insertions(+) create mode 100644 arch/arm/dts/meson-g12a-sei510.dts create mode 100644 board/amlogic/sei510/MAINTAINERS create mode 100644 board/amlogic/sei510/Makefile create mode 100644 board/amlogic/sei510/README create mode 100644 board/amlogic/sei510/sei510.c create mode 100644 configs/sei510_defconfig create mode 100644 include/configs/sei510.h
Missing my Signed-off-by tags.. resending sorry for the noise.
Neil