arm: dts: imx: fsl-imx8qm.dtsi: add gpio aliases to fix gpio command
Subsystems (2)
PATCH 1/1 arm: dts: imx: fsl-imx8qm.dtsi: add gpio aliases to fix gpio command
The gpio command currently uses equal bank names "GPIO0_" for all existing gpio banks, i. e.:
U-Boot# gpio status -a
Bank GPIO0_:GPIO0_0: input: 0 [ ]GPIO0_1: input: 0 [ ]
...
Bank GPIO0_:GPIO0_0: input: 0 [ ]GPIO0_1: input: 0 [ ]
...
So the command is broken, it is not possible to address a desired bank. Add gpio aliases to fix this.
--- arch/arm/dts/fsl-imx8qm.dtsi | 7 +++++++ 1 file changed, 7 insertions(+)
arch/arm/dts/fsl-imx8qm.dtsi +7 -0
@@ -21,6 +21,13 @@ aliases { ethernet0 = &fec1; ethernet1 = &fec2; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; + gpio6 = &gpio7; serial0 = &lpuart0; serial1 = &lpuart1; serial2 = &lpuart2;
Signature · 1 line
2.16.4
PATCH 1/1 arm: dts: imx: fsl-imx8qm.dtsi: add gpio aliases to fix gpio command
On Wed, 24 Jul 2019 08:53:08 +0000
Peng Fan peng.fan at nxp.com wrote:
...
Quoted 4 lines
So the command is broken, it is not possible to address a desired bank. Add gpio aliases to fix this.
Signed-off-by Peng Fan <[email protected]>
--
Anatolij
Peng Fan
AppliedPATCH 1/1 arm: dts: imx: fsl-imx8qm.dtsi: add gpio aliases to fix gpio command
In reply to Peng FanQuoted 15 lines
Subject: [PATCH] arm: dts: imx:
fsl-imx8qm.dtsi: add gpio aliases to fix gpio commandThe gpio command currently uses equal bank names "
GPIO0_" for all existing gpio banks, i. e.:U-Boot# gpio status -a
BankGPIO0_:GPIO0_0: input: 0 [ ]GPIO0_1: input: 0 [ ]
...Bank
GPIO0_:GPIO0_0: input: 0 [ ]GPIO0_1: input: 0 [ ]
Quoted 7 lines
...So the command is broken, it is not possible to address a desired bank. Add gpio aliases to fix this.
Signed-off-by Peng Fan <[email protected]>---
Applied to nxp-imx-8-13,
https://github.com/MrVan/u-boot/tree/nxp-imx-8-13
Regards,
Peng.