MIPS: OProfile: Mark expected switch fall-throughs

Mark switch cases where we are expecting to fall through.

This patch fixes the following warning (Building: mips):

arch/mips/oprofile/op_model_mipsxx.c: In function ‘mipsxx_cpu_stop’:
arch/mips/oprofile/op_model_mipsxx.c:217:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
w_c0_perfctrl3(0);
^~~~~~~~~~~~~~~~~
arch/mips/oprofile/op_model_mipsxx.c:218:2: note: here
case 3:
^~~~
arch/mips/oprofile/op_model_mipsxx.c:219:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
w_c0_perfctrl2(0);
^~~~~~~~~~~~~~~~~
arch/mips/oprofile/op_model_mipsxx.c:220:2: note: here
case 2:
^~~~
arch/mips/oprofile/op_model_mipsxx.c:221:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
w_c0_perfctrl1(0);
^~~~~~~~~~~~~~~~~
arch/mips/oprofile/op_model_mipsxx.c:222:2: note: here
case 1:
^~~~
arch/mips/oprofile/op_model_mipsxx.c: In function ‘mipsxx_cpu_start’:
arch/mips/oprofile/op_model_mipsxx.c:197:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
w_c0_perfctrl3(WHAT | reg.control[3]);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/mips/oprofile/op_model_mipsxx.c:198:2: note: here
case 3:
^~~~
arch/mips/oprofile/op_model_mipsxx.c:199:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
w_c0_perfctrl2(WHAT | reg.control[2]);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/mips/oprofile/op_model_mipsxx.c:200:2: note: here
case 2:
^~~~
arch/mips/oprofile/op_model_mipsxx.c:201:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
w_c0_perfctrl1(WHAT | reg.control[1]);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/mips/oprofile/op_model_mipsxx.c:202:2: note: here
case 1:
^~~~
arch/mips/oprofile/op_model_mipsxx.c: In function ‘reset_counters’:
arch/mips/oprofile/op_model_mipsxx.c:299:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
w_c0_perfcntr3(0);
^~~~~~~~~~~~~~~~~
arch/mips/oprofile/op_model_mipsxx.c:300:2: note: here
case 3:
^~~~
arch/mips/oprofile/op_model_mipsxx.c:302:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
w_c0_perfcntr2(0);
^~~~~~~~~~~~~~~~~
arch/mips/oprofile/op_model_mipsxx.c:303:2: note: here
case 2:
^~~~
arch/mips/oprofile/op_model_mipsxx.c:305:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
w_c0_perfcntr1(0);
^~~~~~~~~~~~~~~~~
arch/mips/oprofile/op_model_mipsxx.c:306:2: note: here
case 1:
^~~~
arch/mips/oprofile/op_model_mipsxx.c: In function ‘mipsxx_perfcount_handler’:
arch/mips/oprofile/op_model_mipsxx.c:242:6: warning: this statement may fall through [-Wimplicit-fallthrough=]

   if ((control & MIPS_PERFCTRL_IE) &&   \
      ^

arch/mips/oprofile/op_model_mipsxx.c:248:2: note: in expansion of macro ‘HANDLE_COUNTER’
HANDLE_COUNTER(3)
^~~~~~~~~~~~~~
arch/mips/oprofile/op_model_mipsxx.c:239:2: note: here
case n + 1: \
^
arch/mips/oprofile/op_model_mipsxx.c:249:2: note: in expansion of macro ‘HANDLE_COUNTER’
HANDLE_COUNTER(2)
^~~~~~~~~~~~~~
arch/mips/oprofile/op_model_mipsxx.c:242:6: warning: this statement may fall through [-Wimplicit-fallthrough=]

   if ((control & MIPS_PERFCTRL_IE) &&   \
      ^

arch/mips/oprofile/op_model_mipsxx.c:249:2: note: in expansion of macro ‘HANDLE_COUNTER’
HANDLE_COUNTER(2)
^~~~~~~~~~~~~~
arch/mips/oprofile/op_model_mipsxx.c:239:2: note: here
case n + 1: \
^
arch/mips/oprofile/op_model_mipsxx.c:250:2: note: in expansion of macro ‘HANDLE_COUNTER’
HANDLE_COUNTER(1)
^~~~~~~~~~~~~~
arch/mips/oprofile/op_model_mipsxx.c:242:6: warning: this statement may fall through [-Wimplicit-fallthrough=]

   if ((control & MIPS_PERFCTRL_IE) &&   \
      ^

arch/mips/oprofile/op_model_mipsxx.c:250:2: note: in expansion of macro ‘HANDLE_COUNTER’
HANDLE_COUNTER(1)
^~~~~~~~~~~~~~
arch/mips/oprofile/op_model_mipsxx.c:239:2: note: here
case n + 1: \
^
arch/mips/oprofile/op_model_mipsxx.c:251:2: note: in expansion of macro ‘HANDLE_COUNTER’
HANDLE_COUNTER(0)
^~~~~~~~~~~~~~
CC usr/include/linux/pmu.h.s
arch/mips/oprofile/op_model_mipsxx.c: In function ‘mipsxx_cpu_setup’:
arch/mips/oprofile/op_model_mipsxx.c:174:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
w_c0_perfcntr3(reg.counter[3]);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/mips/oprofile/op_model_mipsxx.c:175:2: note: here
case 3:
^~~~
arch/mips/oprofile/op_model_mipsxx.c:177:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
w_c0_perfcntr2(reg.counter[2]);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/mips/oprofile/op_model_mipsxx.c:178:2: note: here
case 2:
^~~~
arch/mips/oprofile/op_model_mipsxx.c:180:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
w_c0_perfcntr1(reg.counter[1]);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/mips/oprofile/op_model_mipsxx.c:181:2: note: here
case 1:
^~~~

---
 arch/mips/oprofile/op_model_mipsxx.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

index 7c04b17f4a48..96c13a0ab078 100644
@@ -172,12 +172,15 @@ static void mipsxx_cpu_setup(void *args)
 	case 4:
 		w_c0_perfctrl3(0);
 		w_c0_perfcntr3(reg.counter[3]);
+		/* fall through */
 	case 3:
 		w_c0_perfctrl2(0);
 		w_c0_perfcntr2(reg.counter[2]);
+		/* fall through */
 	case 2:
 		w_c0_perfctrl1(0);
 		w_c0_perfcntr1(reg.counter[1]);
+		/* fall through */
 	case 1:
 		w_c0_perfctrl0(0);
 		w_c0_perfcntr0(reg.counter[0]);

@@ -195,10 +198,13 @@ static void mipsxx_cpu_start(void *args)
 	switch (counters) {
 	case 4:
 		w_c0_perfctrl3(WHAT | reg.control[3]);
+		/* fall through */
 	case 3:
 		w_c0_perfctrl2(WHAT | reg.control[2]);
+		/* fall through */
 	case 2:
 		w_c0_perfctrl1(WHAT | reg.control[1]);
+		/* fall through */
 	case 1:
 		w_c0_perfctrl0(WHAT | reg.control[0]);
 	}

@@ -215,10 +221,13 @@ static void mipsxx_cpu_stop(void *args)
 	switch (counters) {
 	case 4:
 		w_c0_perfctrl3(0);
+		/* fall through */
 	case 3:
 		w_c0_perfctrl2(0);
+		/* fall through */
 	case 2:
 		w_c0_perfctrl1(0);
+		/* fall through */
 	case 1:
 		w_c0_perfctrl0(0);
 	}

@@ -236,6 +245,7 @@ static int mipsxx_perfcount_handler(void)
 
 	switch (counters) {
 #define HANDLE_COUNTER(n)						\
+	/* fall through */						\
 	case n + 1:							\
 		control = r_c0_perfctrl ## n();				\
 		counter = r_c0_perfcntr ## n();				\

@@ -297,12 +307,15 @@ static void reset_counters(void *arg)
 	case 4:
 		w_c0_perfctrl3(0);
 		w_c0_perfcntr3(0);
+		/* fall through */
 	case 3:
 		w_c0_perfctrl2(0);
 		w_c0_perfcntr2(0);
+		/* fall through */
 	case 2:
 		w_c0_perfctrl1(0);
 		w_c0_perfcntr1(0);
+		/* fall through */
 	case 1:
 		w_c0_perfctrl0(0);
 		w_c0_perfcntr0(0);

2.22.0

Hello,

Applied to mips-fixes.

Thanks,
Paul

[ This message was auto-generated; if you believe anything is incorrect
then please email [email protected] to report it. ]