Build ACPI Heterogeneous Memory Attribute Table (HMAT)
Subsystems (5)
v8 cover Build ACPI Heterogeneous Memory Attribute Table (HMAT)
This series of patches will build Heterogeneous Memory Attribute Table (HMAT) according to the command line. The ACPI HMAT describes the memory attributes, such as memory side cache attributes and bandwidth and latency details, related to the Memory Proximity Domain.
The software is expected to use HMAT information as hint for optimization.
In the linux kernel, the codes in drivers/acpi/hmat/hmat.c parse and report the platform's HMAT tables.
The V7 patches link:
https://patchwork.kernel.org/cover/11046195/
Changelog:
v8:
- rebase to upstream
- Add check if numa->numa_state is NULL in pxb_dev_realize_common
- Use nb_nodes in spapr_populate_memory() (RESEND to fix) (Igor)
v7:
- Defer 11-13 of patch v6, because the driver of _HMA hasn't been implemented in kernel driver
- Drop the HMAT_LB_MEM_CACHE_LAST_LEVEL which is not used in ACPI 6.3 (Jonathan)
- Add bit mask in flags of hmat-lb (Jonathan)
- Add a marco to indicate the type is latency or bandwidth (Jonathan)
Liu Jingqi (5):
hmat acpi: Build Memory Proximity Domain Attributes Structure(s) hmat acpi: Build System Locality Latency and Bandwidth Information
Structure(s)
hmat acpi: Build Memory Side Cache Information Structure(s)
numa: Extend the CLI to provide memory latency and bandwidth
information
numa: Extend the CLI to provide memory side cache information
Tao Xu (6):
hw/arm: simplify arm_load_dtb
numa: move numa global variable nb_numa_nodes into MachineState
numa: move numa global variable have_numa_distance into MachineState
numa: move numa global variable numa_info into MachineState
numa: Extend CLI to provide initiator information for numa nodes tests/bios-tables-test: add test cases for ACPI HMAT
exec.c | 5 +- hw/acpi/Kconfig | 5 + hw/acpi/Makefile.objs | 1 + hw/acpi/aml-build.c | 9 +- hw/acpi/hmat.c | 256 +++++++++++++++++++++++++ hw/acpi/hmat.h | 103 ++++++++++ hw/arm/aspeed.c | 5 +- hw/arm/boot.c | 20 +- hw/arm/collie.c | 8 +- hw/arm/cubieboard.c | 5 +- hw/arm/exynos4_boards.c | 7 +- hw/arm/highbank.c | 8 +- hw/arm/imx25_pdk.c | 5 +- hw/arm/integratorcp.c | 8 +- hw/arm/kzm.c | 5 +- hw/arm/mainstone.c | 5 +- hw/arm/mcimx6ul-evk.c | 5 +- hw/arm/mcimx7d-sabre.c | 5 +- hw/arm/musicpal.c | 8 +- hw/arm/nseries.c | 5 +- hw/arm/omap_sx1.c | 5 +- hw/arm/palm.c | 10 +- hw/arm/raspi.c | 6 +- hw/arm/realview.c | 5 +- hw/arm/sabrelite.c | 5 +- hw/arm/sbsa-ref.c | 12 +- hw/arm/spitz.c | 5 +- hw/arm/tosa.c | 8 +- hw/arm/versatilepb.c | 5 +- hw/arm/vexpress.c | 5 +- hw/arm/virt-acpi-build.c | 19 +- hw/arm/virt.c | 17 +- hw/arm/xilinx_zynq.c | 8 +- hw/arm/xlnx-versal-virt.c | 7 +- hw/arm/xlnx-zcu102.c | 5 +- hw/arm/z2.c | 8 +- hw/core/machine-hmp-cmds.c | 12 +- hw/core/machine.c | 38 +++- hw/core/numa.c | 287 ++++++++++++++++++++++++---- hw/i386/acpi-build.c | 7 +- hw/i386/pc.c | 13 +- hw/mem/pc-dimm.c | 2 + hw/pci-bridge/pci_expander_bridge.c | 8 +- hw/ppc/spapr.c | 29 +-- hw/ppc/spapr_pci.c | 4 +- include/hw/acpi/aml-build.h | 2 +- include/hw/arm/boot.h | 4 +- include/hw/boards.h | 1 + include/qemu/typedefs.h | 2 + include/sysemu/numa.h | 30 ++- include/sysemu/sysemu.h | 23 +++ qapi/machine.json | 183 +++++++++++++++++- qemu-options.hx | 84 +++++++- tests/bios-tables-test.c | 43 +++++ 54 files changed, 1134 insertions(+), 246 deletions(-) create mode 100644 hw/acpi/hmat.c create mode 100644 hw/acpi/hmat.h
Signature · 1 line
2.20.1
PATCH RESEND v8 1/11 hw/arm: simplify arm_load_dtb
In struct arm_boot_info, kernel_filename, initrd_filename and kernel_cmdline are copied from from MachineState. This patch add MachineState as a parameter into arm_load_dtb() and move the copy chunk of kernel_filename, initrd_filename and kernel_cmdline into arm_load_kernel().
---
Changes in v8:
- rebase to upstream
--- hw/arm/aspeed.c | 5 +---- hw/arm/boot.c | 14 ++++++++------ hw/arm/collie.c | 8 +------- hw/arm/cubieboard.c | 5 +---- hw/arm/exynos4_boards.c | 7 ++----- hw/arm/highbank.c | 8 +------- hw/arm/imx25_pdk.c | 5 +---- hw/arm/integratorcp.c | 8 +------- hw/arm/kzm.c | 5 +---- hw/arm/mainstone.c | 5 +---- hw/arm/mcimx6ul-evk.c | 5 +---- hw/arm/mcimx7d-sabre.c | 5 +---- hw/arm/musicpal.c | 8 +------- hw/arm/nseries.c | 5 +---- hw/arm/omap_sx1.c | 5 +---- hw/arm/palm.c | 10 ++-------- hw/arm/raspi.c | 6 +----- hw/arm/realview.c | 5 +---- hw/arm/sabrelite.c | 5 +---- hw/arm/sbsa-ref.c | 3 +-- hw/arm/spitz.c | 5 +---- hw/arm/tosa.c | 8 +------- hw/arm/versatilepb.c | 5 +---- hw/arm/vexpress.c | 5 +---- hw/arm/virt.c | 8 +++----- hw/arm/xilinx_zynq.c | 8 +------- hw/arm/xlnx-versal-virt.c | 7 ++----- hw/arm/xlnx-zcu102.c | 5 +---- hw/arm/z2.c | 8 +------- include/hw/arm/boot.h | 4 ++-- 30 files changed, 43 insertions(+), 147 deletions(-)
hw/arm/aspeed.c +1 -4
@@ -241,9 +241,6 @@ static void aspeed_board_init(MachineState *machine,write_boot_rom (drive0,FIRMWARE_ADDR , fl->size, &error_abort); } - aspeed_board_binfo.kernel_filename = machine->kernel_filename; - aspeed_board_binfo.initrd_filename = machine->initrd_filename; - aspeed_board_binfo.kernel_cmdline = machine->kernel_cmdline; aspeed_board_binfo.ram_size = ram_size; aspeed_board_binfo.loader_start = sc->info->memmap[ASPEED_SDRAM ]; aspeed_board_binfo.nb_cpus = bmc->soc.num_cpus;
@@ -252,7 +249,7 @@ static void aspeed_board_init(MachineState *machine, cfg->i2c_init (bmc); } -arm_load_kernel (ARM_CPU (first_cpu), &aspeed_board_binfo); +arm_load_kernel (ARM_CPU (first_cpu), machine, &aspeed_board_binfo); }static void palmetto_bmc_i2c_init (AspeedBoardState *bmc)
hw/arm/boot.c +8 -6
@@ -524,7 +524,7 @@ static void fdt_add_psci_node(void *fdt) }int arm_load_dtb (hwaddr addr,const struct arm_boot_info *binfo, -hwaddr addr_limit,AddressSpace *as) +hwaddr addr_limit,AddressSpace *as,MachineState *ms) {void *fdt =NULL ;int size, rc, n =0 ;
@@ -627,9 +627,9 @@ int arm_load_dtb(hwaddr addr, const struct arm_boot_info *binfo,qemu_fdt_add_subnode (fdt,"/chosen" ); } -if (binfo->kernel_cmdline && *binfo->kernel_cmdline) { +if (ms->kernel_cmdline && *ms->kernel_cmdline) { rc =qemu_fdt_setprop_string (fdt,"/chosen" ,"bootargs" , - binfo->kernel_cmdline); + ms->kernel_cmdline);if (rc <0 ) {fprintf (stderr,"couldn't set /chosen/bootargs\n" ); goto fail;
@@ -1261,7 +1261,7 @@ static void arm_setup_firmware_boot(ARMCPU *cpu, struct arm_boot_info *info)*/ } -void arm_load_kernel (ARMCPU *cpu,struct arm_boot_info *info) +void arm_load_kernel (ARMCPU *cpu,MachineState *ms,struct arm_boot_info *info) {CPUState *cs;AddressSpace *as =arm_boot_address_space (cpu, info);
@@ -1282,7 +1282,9 @@ void arm_load_kernel(ARMCPU *cpu, struct arm_boot_info *info)* doesn't support secure. */ assert (!(info->secure_board_setup &&kvm_enabled ())); - + info->kernel_filename = ms->kernel_filename; + info->kernel_cmdline = ms->kernel_cmdline; + info->initrd_filename = ms->initrd_filename; info->dtb_filename =qemu_opt_get (qemu_get_machine_opts (),"dtb" ); info->dtb_limit =0 ;
@@ -1294,7 +1296,7 @@ void arm_load_kernel(ARMCPU *cpu, struct arm_boot_info *info) }if (!info->skip_dtb_autoload &&have_dtb (info)) { -if (arm_load_dtb (info->dtb_start, info, info->dtb_limit, as) <0 ) { +if (arm_load_dtb (info->dtb_start, info, info->dtb_limit, as, ms) <0 ) {exit (1 ); } }
hw/arm/collie.c +1 -7
@@ -26,9 +26,6 @@ static struct arm_boot_info collie_binfo = {static void collie_init (MachineState *machine) { -const char *kernel_filename = machine->kernel_filename; -const char *kernel_cmdline = machine->kernel_cmdline; -const char *initrd_filename = machine->initrd_filename;StrongARMState *s;DriveInfo *dinfo;MemoryRegion *sysmem =get_system_memory ();
@@ -47,11 +44,8 @@ static void collie_init(MachineState *machine)sysbus_create_simple ("scoop" ,0x40800000 ,NULL ); - collie_binfo.kernel_filename = kernel_filename; - collie_binfo.kernel_cmdline = kernel_cmdline; - collie_binfo.initrd_filename = initrd_filename; collie_binfo.board_id =0x208 ; -arm_load_kernel (s->cpu, &collie_binfo); +arm_load_kernel (s->cpu, machine, &collie_binfo); }static void collie_machine_init (MachineClass *mc)
hw/arm/cubieboard.c +1 -4
@@ -72,10 +72,7 @@ static void cubieboard_init(MachineState *machine)/* TODO create and connect IDE devices for ide_drive_get() */ cubieboard_binfo.ram_size = machine->ram_size; - cubieboard_binfo.kernel_filename = machine->kernel_filename; - cubieboard_binfo.kernel_cmdline = machine->kernel_cmdline; - cubieboard_binfo.initrd_filename = machine->initrd_filename; -arm_load_kernel (&s->a10->cpu, &cubieboard_binfo); +arm_load_kernel (&s->a10->cpu, machine, &cubieboard_binfo); }static void cubieboard_machine_init (MachineClass *mc)
hw/arm/exynos4_boards.c +2 -5
@@ -120,9 +120,6 @@ exynos4_boards_init_common(MachineState *machine, exynos4_board_binfo.board_id = exynos4_board_id[board_type]; exynos4_board_binfo.smp_bootreg_addr = exynos4_board_smp_bootreg_addr[board_type]; - exynos4_board_binfo.kernel_filename = machine->kernel_filename; - exynos4_board_binfo.initrd_filename = machine->initrd_filename; - exynos4_board_binfo.kernel_cmdline = machine->kernel_cmdline; exynos4_board_binfo.gic_cpu_if_addr =EXYNOS4210_SMP_PRIVATE_BASE_ADDR +0x100 ;
@@ -141,7 +138,7 @@ static void nuri_init(MachineState *machine) {exynos4_boards_init_common (machine,EXYNOS4_BOARD_NURI ); -arm_load_kernel (ARM_CPU (first_cpu), &exynos4_board_binfo); +arm_load_kernel (ARM_CPU (first_cpu), machine, &exynos4_board_binfo); }static void smdkc210_init (MachineState *machine)
@@ -151,7 +148,7 @@ static void smdkc210_init(MachineState *machine)lan9215_init (SMDK_LAN9118_BASE_ADDR ,qemu_irq_invert (s->soc.irq_table[exynos4210_get_irq (37 ,1 )])); -arm_load_kernel (ARM_CPU (first_cpu), &exynos4_board_binfo); +arm_load_kernel (ARM_CPU (first_cpu), machine, &exynos4_board_binfo); }static void nuri_class_init (ObjectClass *oc,void *data)
hw/arm/highbank.c +1 -7
@@ -234,9 +234,6 @@ enum cxmachines {static void calxeda_init (MachineState *machine,enum cxmachines machine_id) {ram_addr_t ram_size = machine->ram_size; -const char *kernel_filename = machine->kernel_filename; -const char *kernel_cmdline = machine->kernel_cmdline; -const char *initrd_filename = machine->initrd_filename;DeviceState *dev =NULL ;SysBusDevice *busdev;qemu_irq pic[128 ];
@@ -388,9 +385,6 @@ static void calxeda_init(MachineState *machine, enum cxmachines machine_id)/* TODO create and connect IDE devices for ide_drive_get() */ highbank_binfo.ram_size = ram_size; - highbank_binfo.kernel_filename = kernel_filename; - highbank_binfo.kernel_cmdline = kernel_cmdline; - highbank_binfo.initrd_filename = initrd_filename;/* highbank requires a dtb in order to boot, and the dtb will override * the board ID. The following value is ignored, so set it to -1 to be * clear that the value is meaningless.
@@ -410,7 +404,7 @@ static void calxeda_init(MachineState *machine, enum cxmachines machine_id) "may not boot."); } -arm_load_kernel (ARM_CPU (first_cpu), &highbank_binfo); +arm_load_kernel (ARM_CPU (first_cpu), machine, &highbank_binfo); }static void highbank_init (MachineState *machine)
hw/arm/imx25_pdk.c +1 -4
@@ -116,9 +116,6 @@ static void imx25_pdk_init(MachineState *machine) } imx25_pdk_binfo.ram_size = machine->ram_size; - imx25_pdk_binfo.kernel_filename = machine->kernel_filename; - imx25_pdk_binfo.kernel_cmdline = machine->kernel_cmdline; - imx25_pdk_binfo.initrd_filename = machine->initrd_filename; imx25_pdk_binfo.loader_start =FSL_IMX25_SDRAM0_ADDR ; imx25_pdk_binfo.board_id =1771 , imx25_pdk_binfo.nb_cpus =1 ;
@@ -129,7 +126,7 @@ static void imx25_pdk_init(MachineState *machine)* fail. */ if (!qtest_enabled ()) { -arm_load_kernel (&s->soc.cpu, &imx25_pdk_binfo); +arm_load_kernel (&s->soc.cpu, machine, &imx25_pdk_binfo); } }
hw/arm/integratorcp.c +1 -7
@@ -578,9 +578,6 @@ static struct arm_boot_info integrator_binfo = {static void integratorcp_init (MachineState *machine) {ram_addr_t ram_size = machine->ram_size; -const char *kernel_filename = machine->kernel_filename; -const char *kernel_cmdline = machine->kernel_cmdline; -const char *initrd_filename = machine->initrd_filename;Object *cpuobj;ARMCPU *cpu;MemoryRegion *address_space_mem =get_system_memory ();
@@ -650,10 +647,7 @@ static void integratorcp_init(MachineState *machine)sysbus_create_simple ("pl110" ,0xc0000000 , pic[22 ]); integrator_binfo.ram_size = ram_size; - integrator_binfo.kernel_filename = kernel_filename; - integrator_binfo.kernel_cmdline = kernel_cmdline; - integrator_binfo.initrd_filename = initrd_filename; -arm_load_kernel (cpu, &integrator_binfo); +arm_load_kernel (cpu, machine, &integrator_binfo); }static void integratorcp_machine_init (MachineClass *mc)
hw/arm/kzm.c +1 -4
@@ -126,13 +126,10 @@ static void kzm_init(MachineState *machine) } kzm_binfo.ram_size = machine->ram_size; - kzm_binfo.kernel_filename = machine->kernel_filename; - kzm_binfo.kernel_cmdline = machine->kernel_cmdline; - kzm_binfo.initrd_filename = machine->initrd_filename; kzm_binfo.nb_cpus =1 ;if (!qtest_enabled ()) { -arm_load_kernel (&s->soc.cpu, &kzm_binfo); +arm_load_kernel (&s->soc.cpu, machine, &kzm_binfo); } }
hw/arm/mainstone.c +1 -4
@@ -177,11 +177,8 @@ static void mainstone_common_init(MemoryRegion *address_space_mem,smc91c111_init (&nd_table[0 ],MST_ETH_PHYS ,qdev_get_gpio_in (mst_irq,ETHERNET_IRQ )); - mainstone_binfo.kernel_filename = machine->kernel_filename; - mainstone_binfo.kernel_cmdline = machine->kernel_cmdline; - mainstone_binfo.initrd_filename = machine->initrd_filename; mainstone_binfo.board_id = arm_id; -arm_load_kernel (mpu->cpu, &mainstone_binfo); +arm_load_kernel (mpu->cpu, machine, &mainstone_binfo); }static void mainstone_init (MachineState *machine)
hw/arm/mcimx6ul-evk.c +1 -4
@@ -39,9 +39,6 @@ static void mcimx6ul_evk_init(MachineState *machine) .loader_start = FSL_IMX6UL_MMDC_ADDR, .board_id = -1, .ram_size = machine->ram_size, - .kernel_filename = machine->kernel_filename, - .kernel_cmdline = machine->kernel_cmdline, - .initrd_filename = machine->initrd_filename, .nb_cpus = machine->smp.cpus, };
@@ -71,7 +68,7 @@ static void mcimx6ul_evk_init(MachineState *machine) }if (!qtest_enabled ()) { -arm_load_kernel (&s->soc.cpu, &boot_info); +arm_load_kernel (&s->soc.cpu, machine, &boot_info); } }
hw/arm/mcimx7d-sabre.c +1 -4
@@ -42,9 +42,6 @@ static void mcimx7d_sabre_init(MachineState *machine) .loader_start = FSL_IMX7_MMDC_ADDR, .board_id = -1, .ram_size = machine->ram_size, - .kernel_filename = machine->kernel_filename, - .kernel_cmdline = machine->kernel_cmdline, - .initrd_filename = machine->initrd_filename, .nb_cpus = machine->smp.cpus, };
@@ -74,7 +71,7 @@ static void mcimx7d_sabre_init(MachineState *machine) }if (!qtest_enabled ()) { -arm_load_kernel (&s->soc.cpu[0 ], &boot_info); +arm_load_kernel (&s->soc.cpu[0 ], machine, &boot_info); } }
hw/arm/musicpal.c +1 -7
@@ -1568,9 +1568,6 @@ static struct arm_boot_info musicpal_binfo = {static void musicpal_init (MachineState *machine) { -const char *kernel_filename = machine->kernel_filename; -const char *kernel_cmdline = machine->kernel_cmdline; -const char *initrd_filename = machine->initrd_filename;ARMCPU *cpu;qemu_irq pic[32 ];DeviceState *dev;
@@ -1699,10 +1696,7 @@ static void musicpal_init(MachineState *machine)sysbus_connect_irq (s,0 , pic[MP_AUDIO_IRQ ]); musicpal_binfo.ram_size =MP_RAM_DEFAULT_SIZE ; - musicpal_binfo.kernel_filename = kernel_filename; - musicpal_binfo.kernel_cmdline = kernel_cmdline; - musicpal_binfo.initrd_filename = initrd_filename; -arm_load_kernel (cpu, &musicpal_binfo); +arm_load_kernel (cpu, machine, &musicpal_binfo); }static void musicpal_machine_init (MachineClass *mc)
hw/arm/nseries.c +1 -4
@@ -1358,10 +1358,7 @@ static void n8x0_init(MachineState *machine,if (machine->kernel_filename) {/* Or at the linux loader. */ - binfo->kernel_filename = machine->kernel_filename; - binfo->kernel_cmdline = machine->kernel_cmdline; - binfo->initrd_filename = machine->initrd_filename; -arm_load_kernel (s->mpu->cpu, binfo); +arm_load_kernel (s->mpu->cpu, machine, binfo);qemu_register_reset (n8x0_boot_init, s); }
hw/arm/omap_sx1.c +1 -4
@@ -196,10 +196,7 @@ static void sx1_init(MachineState *machine, const int version) }/* Load the kernel. */ - sx1_binfo.kernel_filename = machine->kernel_filename; - sx1_binfo.kernel_cmdline = machine->kernel_cmdline; - sx1_binfo.initrd_filename = machine->initrd_filename; -arm_load_kernel (mpu->cpu, &sx1_binfo); +arm_load_kernel (mpu->cpu, machine, &sx1_binfo);/* TODO: fix next line */ //~ qemu_console_resize(ds, 640, 480);
hw/arm/palm.c +2 -8
@@ -186,9 +186,6 @@ static struct arm_boot_info palmte_binfo = {static void palmte_init (MachineState *machine) { -const char *kernel_filename = machine->kernel_filename; -const char *kernel_cmdline = machine->kernel_cmdline; -const char *initrd_filename = machine->initrd_filename;MemoryRegion *address_space_mem =get_system_memory ();struct omap_mpu_state_s *mpu;int flash_size =0x00800000 ;
@@ -248,16 +245,13 @@ static void palmte_init(MachineState *machine) } } -if (!rom_loaded && !kernel_filename && !qtest_enabled ()) { +if (!rom_loaded && !machine->kernel_filename && !qtest_enabled ()) {fprintf (stderr,"Kernel or ROM image must be specified\n" );exit (1 ); }/* Load the kernel. */ - palmte_binfo.kernel_filename = kernel_filename; - palmte_binfo.kernel_cmdline = kernel_cmdline; - palmte_binfo.initrd_filename = initrd_filename; -arm_load_kernel (mpu->cpu, &palmte_binfo); +arm_load_kernel (mpu->cpu, machine, &palmte_binfo); }static void palmte_machine_init (MachineClass *mc)
hw/arm/raspi.c +1 -5
@@ -157,13 +157,9 @@ static void setup_boot(MachineState *machine, int version, size_t ram_size) binfo.entry = firmware_addr; binfo.firmware_loaded = true; - }else { - binfo.kernel_filename = machine->kernel_filename; - binfo.kernel_cmdline = machine->kernel_cmdline; - binfo.initrd_filename = machine->initrd_filename; } -arm_load_kernel (ARM_CPU (first_cpu), &binfo); +arm_load_kernel (ARM_CPU (first_cpu), machine, &binfo); }static void raspi_init (MachineState *machine,int version)
hw/arm/realview.c +1 -4
@@ -350,13 +350,10 @@ static void realview_init(MachineState *machine,memory_region_add_subregion (sysmem,SMP_BOOT_ADDR , ram_hack); realview_binfo.ram_size = ram_size; - realview_binfo.kernel_filename = machine->kernel_filename; - realview_binfo.kernel_cmdline = machine->kernel_cmdline; - realview_binfo.initrd_filename = machine->initrd_filename; realview_binfo.nb_cpus = smp_cpus; realview_binfo.board_id = realview_board_id[board_type]; realview_binfo.loader_start = (board_type ==BOARD_PB_A8 ?0x70000000 :0 ); -arm_load_kernel (ARM_CPU (first_cpu), &realview_binfo); +arm_load_kernel (ARM_CPU (first_cpu), machine, &realview_binfo); }static void realview_eb_init (MachineState *machine)
hw/arm/sabrelite.c +1 -4
@@ -102,16 +102,13 @@ static void sabrelite_init(MachineState *machine) } sabrelite_binfo.ram_size = machine->ram_size; - sabrelite_binfo.kernel_filename = machine->kernel_filename; - sabrelite_binfo.kernel_cmdline = machine->kernel_cmdline; - sabrelite_binfo.initrd_filename = machine->initrd_filename; sabrelite_binfo.nb_cpus = machine->smp.cpus; sabrelite_binfo.secure_boot = true; sabrelite_binfo.write_secondary_boot = sabrelite_write_secondary; sabrelite_binfo.secondary_cpu_reset_hook = sabrelite_reset_secondary;if (!qtest_enabled ()) { -arm_load_kernel (&s->soc.cpu[0 ], &sabrelite_binfo); +arm_load_kernel (&s->soc.cpu[0 ], machine, &sabrelite_binfo); } }
hw/arm/sbsa-ref.c +1 -2
@@ -709,13 +709,12 @@ static void sbsa_ref_init(MachineState *machine)create_pcie (sms, pic); sms->bootinfo.ram_size = machine->ram_size; - sms->bootinfo.kernel_filename = machine->kernel_filename; sms->bootinfo.nb_cpus = smp_cpus; sms->bootinfo.board_id =-1 ; sms->bootinfo.loader_start = sbsa_ref_memmap[SBSA_MEM ].base; sms->bootinfo.get_dtb = sbsa_ref_dtb; sms->bootinfo.firmware_loaded = firmware_loaded; -arm_load_kernel (ARM_CPU (first_cpu), &sms->bootinfo); +arm_load_kernel (ARM_CPU (first_cpu), machine, &sms->bootinfo); }static uint64_t sbsa_ref_cpu_mp_affinity (SBSAMachineState *sms,int idx)
hw/arm/spitz.c +1 -4
@@ -951,11 +951,8 @@ static void spitz_common_init(MachineState *machine,/* A 4.0 GB microdrive is permanently sitting in CF slot 0. */ spitz_microdrive_attach (mpu,0 ); - spitz_binfo.kernel_filename = machine->kernel_filename; - spitz_binfo.kernel_cmdline = machine->kernel_cmdline; - spitz_binfo.initrd_filename = machine->initrd_filename; spitz_binfo.board_id = arm_id; -arm_load_kernel (mpu->cpu, &spitz_binfo); +arm_load_kernel (mpu->cpu, machine, &spitz_binfo);sl_bootparam_write (SL_PXA_PARAM_BASE ); }
hw/arm/tosa.c +1 -7
@@ -218,9 +218,6 @@ static struct arm_boot_info tosa_binfo = {static void tosa_init (MachineState *machine) { -const char *kernel_filename = machine->kernel_filename; -const char *kernel_cmdline = machine->kernel_cmdline; -const char *initrd_filename = machine->initrd_filename;MemoryRegion *address_space_mem =get_system_memory ();MemoryRegion *rom =g_new (MemoryRegion,1 );PXA2xxState *mpu;
@@ -245,11 +242,8 @@ static void tosa_init(MachineState *machine)tosa_tg_init (mpu); - tosa_binfo.kernel_filename = kernel_filename; - tosa_binfo.kernel_cmdline = kernel_cmdline; - tosa_binfo.initrd_filename = initrd_filename; tosa_binfo.board_id =0x208 ; -arm_load_kernel (mpu->cpu, &tosa_binfo); +arm_load_kernel (mpu->cpu, machine, &tosa_binfo);sl_bootparam_write (SL_PXA_PARAM_BASE ); }
hw/arm/versatilepb.c +1 -4
@@ -373,11 +373,8 @@ static void versatile_init(MachineState *machine, int board_id) } versatile_binfo.ram_size = machine->ram_size; - versatile_binfo.kernel_filename = machine->kernel_filename; - versatile_binfo.kernel_cmdline = machine->kernel_cmdline; - versatile_binfo.initrd_filename = machine->initrd_filename; versatile_binfo.board_id = board_id; -arm_load_kernel (cpu, &versatile_binfo); +arm_load_kernel (cpu, machine, &versatile_binfo); }static void vpb_init (MachineState *machine)
hw/arm/vexpress.c +1 -4
@@ -707,9 +707,6 @@ static void vexpress_common_init(MachineState *machine) } daughterboard->bootinfo.ram_size = machine->ram_size; - daughterboard->bootinfo.kernel_filename = machine->kernel_filename; - daughterboard->bootinfo.kernel_cmdline = machine->kernel_cmdline; - daughterboard->bootinfo.initrd_filename = machine->initrd_filename; daughterboard->bootinfo.nb_cpus = machine->smp.cpus; daughterboard->bootinfo.board_id =VEXPRESS_BOARD_ID ; daughterboard->bootinfo.loader_start = daughterboard->loader_start;
@@ -719,7 +716,7 @@ static void vexpress_common_init(MachineState *machine) daughterboard->bootinfo.modify_dtb = vexpress_modify_dtb;/* When booting Linux we should be in secure state if the CPU has one. */ daughterboard->bootinfo.secure_boot = vms->secure; -arm_load_kernel (ARM_CPU (first_cpu), &daughterboard->bootinfo); +arm_load_kernel (ARM_CPU (first_cpu), machine, &daughterboard->bootinfo); }static bool vexpress_get_secure (Object *obj,Error **errp)
hw/arm/virt.c +3 -5
@@ -1364,6 +1364,7 @@ void virt_machine_done(Notifier *notifier, void *data) {VirtMachineState *vms =container_of (notifier, VirtMachineState, machine_done); +MachineState *ms =MACHINE (vms);ARMCPU *cpu =ARM_CPU (first_cpu);struct arm_boot_info *info = &vms->bootinfo;AddressSpace *as =arm_boot_address_space (cpu, info);
@@ -1381,7 +1382,7 @@ void virt_machine_done(Notifier *notifier, void *data) vms->memmap[VIRT_PLATFORM_BUS ].size, vms->irqmap[VIRT_PLATFORM_BUS]); } -if (arm_load_dtb (info->dtb_start, info, info->dtb_limit, as) <0 ) { +if (arm_load_dtb (info->dtb_start, info, info->dtb_limit, as, ms) <0 ) {exit (1 ); }
@@ -1707,16 +1708,13 @@ static void machvirt_init(MachineState *machine)create_platform_bus (vms, pic); vms->bootinfo.ram_size = machine->ram_size; - vms->bootinfo.kernel_filename = machine->kernel_filename; - vms->bootinfo.kernel_cmdline = machine->kernel_cmdline; - vms->bootinfo.initrd_filename = machine->initrd_filename; vms->bootinfo.nb_cpus = smp_cpus; vms->bootinfo.board_id =-1 ; vms->bootinfo.loader_start = vms->memmap[VIRT_MEM ].base; vms->bootinfo.get_dtb = machvirt_dtb; vms->bootinfo.skip_dtb_autoload = true; vms->bootinfo.firmware_loaded = firmware_loaded; -arm_load_kernel (ARM_CPU (first_cpu), &vms->bootinfo); +arm_load_kernel (ARM_CPU (first_cpu), machine, &vms->bootinfo); vms->machine_done.notify = virt_machine_done;qemu_add_machine_init_done_notifier (&vms->machine_done);
hw/arm/xilinx_zynq.c +1 -7
@@ -158,9 +158,6 @@ static inline void zynq_init_spi_flashes(uint32_t base_addr, qemu_irq irq,static void zynq_init (MachineState *machine) {ram_addr_t ram_size = machine->ram_size; -const char *kernel_filename = machine->kernel_filename; -const char *kernel_cmdline = machine->kernel_cmdline; -const char *initrd_filename = machine->initrd_filename;ARMCPU *cpu;MemoryRegion *address_space_mem =get_system_memory ();MemoryRegion *ext_ram =g_new (MemoryRegion,1 );
@@ -303,16 +300,13 @@ static void zynq_init(MachineState *machine)sysbus_mmio_map (busdev,0 ,0xF8007000 ); zynq_binfo.ram_size = ram_size; - zynq_binfo.kernel_filename = kernel_filename; - zynq_binfo.kernel_cmdline = kernel_cmdline; - zynq_binfo.initrd_filename = initrd_filename; zynq_binfo.nb_cpus =1 ; zynq_binfo.board_id =0xd32 ; zynq_binfo.loader_start =0 ; zynq_binfo.board_setup_addr =BOARD_SETUP_ADDR ; zynq_binfo.write_board_setup = zynq_write_board_setup; -arm_load_kernel (ARM_CPU (first_cpu), &zynq_binfo); +arm_load_kernel (ARM_CPU (first_cpu), machine, &zynq_binfo); }static void zynq_machine_init (MachineClass *mc)
hw/arm/xlnx-versal-virt.c +2 -5
@@ -441,14 +441,11 @@ static void versal_virt_init(MachineState *machine) 0, &s->soc.fpd.apu.mr, 0); s->binfo.ram_size = machine->ram_size; - s->binfo.kernel_filename = machine->kernel_filename; - s->binfo.kernel_cmdline = machine->kernel_cmdline; - s->binfo.initrd_filename = machine->initrd_filename; s->binfo.loader_start =0x0 ; s->binfo.get_dtb = versal_virt_get_dtb; s->binfo.modify_dtb = versal_virt_modify_dtb;if (machine->kernel_filename) { -arm_load_kernel (s->soc.fpd.apu.cpu[0 ], &s->binfo); +arm_load_kernel (s->soc.fpd.apu.cpu[0 ], machine, &s->binfo); }else {AddressSpace *as =arm_boot_address_space (s->soc.fpd.apu.cpu[0 ], &s->binfo);
@@ -457,7 +454,7 @@ static void versal_virt_init(MachineState *machine) s->binfo.loader_start =0x1000 ; s->binfo.dtb_limit =0x1000000 ;if (arm_load_dtb (s->binfo.loader_start, - &s->binfo, s->binfo.dtb_limit, as) <0 ) { + &s->binfo, s->binfo.dtb_limit, as, machine) <0 ) {exit (EXIT_FAILURE ); } }
hw/arm/xlnx-zcu102.c +1 -4
@@ -171,11 +171,8 @@ static void xlnx_zcu102_init(MachineState *machine)/* TODO create and connect IDE devices for ide_drive_get() */ xlnx_zcu102_binfo.ram_size = ram_size; - xlnx_zcu102_binfo.kernel_filename = machine->kernel_filename; - xlnx_zcu102_binfo.kernel_cmdline = machine->kernel_cmdline; - xlnx_zcu102_binfo.initrd_filename = machine->initrd_filename; xlnx_zcu102_binfo.loader_start =0 ; -arm_load_kernel (s->soc.boot_cpu_ptr, &xlnx_zcu102_binfo); +arm_load_kernel (s->soc.boot_cpu_ptr, machine, &xlnx_zcu102_binfo); }static void xlnx_zcu102_machine_instance_init (Object *obj)
hw/arm/z2.c +1 -7
@@ -296,9 +296,6 @@ static const TypeInfo aer915_info = {static void z2_init (MachineState *machine) { -const char *kernel_filename = machine->kernel_filename; -const char *kernel_cmdline = machine->kernel_cmdline; -const char *initrd_filename = machine->initrd_filename;MemoryRegion *address_space_mem =get_system_memory ();uint32_t sector_len =0x10000 ;PXA2xxState *mpu;
@@ -352,11 +349,8 @@ static void z2_init(MachineState *machine)qdev_connect_gpio_out (mpu->gpio,Z2_GPIO_LCD_CS ,qemu_allocate_irq (z2_lcd_cs, z2_lcd,0 )); - z2_binfo.kernel_filename = kernel_filename; - z2_binfo.kernel_cmdline = kernel_cmdline; - z2_binfo.initrd_filename = initrd_filename; z2_binfo.board_id =0x6dd ; -arm_load_kernel (mpu->cpu, &z2_binfo); +arm_load_kernel (mpu->cpu, machine, &z2_binfo); }static void z2_machine_init (MachineClass *mc)
include/hw/arm/boot.h +2 -2
@@ -133,7 +133,7 @@ struct arm_boot_info {* before sysbus-fdt arm_register_platform_bus_fdt_creator. Indeed the * machine init done notifiers are called in registration reverse order. */ -void arm_load_kernel (ARMCPU *cpu,struct arm_boot_info *info); +void arm_load_kernel (ARMCPU *cpu,MachineState *ms,struct arm_boot_info *info);AddressSpace *arm_boot_address_space (ARMCPU *cpu,const struct arm_boot_info *info);
@@ -160,7 +160,7 @@ AddressSpace *arm_boot_address_space(ARMCPU *cpu,* Note: Must not be called unless have_dtb(binfo) is true. */ int arm_load_dtb (hwaddr addr,const struct arm_boot_info *binfo, -hwaddr addr_limit,AddressSpace *as); +hwaddr addr_limit,AddressSpace *as,MachineState *ms);/* Write a secure board setup routine with a dummy handler for SMCs */ void arm_write_secure_board_setup_dummy_smc(ARMCPU *cpu,
Signature · 1 line
2.20.1
PATCH RESEND v8 2/11 numa: move numa global variable nb_numa_nodes into MachineState
In reply to Tao XuAdd struct NumaState in MachineState and move existing numa global nb_numa_nodes(renamed as "num_nodes") into NumaState. And add variable numa_support into MachineClass to decide which submachines support NUMA.
---
Changes in v8:
- Add check if numa->numa_state is NULL in pxb_dev_realize_common
- Use nb_nodes in spapr_populate_memory() (Igor)
--- exec.c | 5 ++- hw/acpi/aml-build.c | 3 +- hw/arm/boot.c | 4 +- hw/arm/sbsa-ref.c | 4 +- hw/arm/virt-acpi-build.c | 10 +++-- hw/arm/virt.c | 4 +- hw/core/machine-hmp-cmds.c | 12 ++++-- hw/core/machine.c | 14 +++++-- hw/core/numa.c | 60 +++++++++++++++++------------ hw/i386/acpi-build.c | 2 +- hw/i386/pc.c | 9 +++-- hw/mem/pc-dimm.c | 2 + hw/pci-bridge/pci_expander_bridge.c | 8 +++- hw/ppc/spapr.c | 19 ++++----- include/hw/acpi/aml-build.h | 2 +- include/hw/boards.h | 1 + include/sysemu/numa.h | 10 ++++- 17 files changed, 110 insertions(+), 59 deletions(-)
exec.c +4 -1
@@ -1749,6 +1749,7 @@ long qemu_minrampagesize(void)long hpsize =LONG_MAX ;long mainrampagesize;Object *memdev_root; +MachineState *ms =MACHINE (qdev_get_machine ()); mainrampagesize =qemu_mempath_getpagesize (mem_path);
@@ -1776,7 +1777,9 @@ long qemu_minrampagesize(void)* so if its page size is smaller we have got to report that size instead. */ if (hpsize > mainrampagesize && - (nb_numa_nodes ==0 || numa_info[0 ].node_memdev ==NULL )) { + (ms->numa_state ==NULL || + ms->numa_state->num_nodes ==0 || + numa_info[0 ].node_memdev ==NULL )) {static bool warned;if (!warned) {error_report ("Huge page support disabled (n/a for main memory)." );
hw/acpi/aml-build.c +2 -1
@@ -1726,10 +1726,11 @@ void build_srat_memory(AcpiSratMemoryAffinity *numamem, uint64_t base,* ACPI spec 5.2.17 System Locality Distance Information Table * (Revision 2.0 or later) */ -void build_slit (GArray *table_data,BIOSLinker *linker) +void build_slit (GArray *table_data,BIOSLinker *linker,MachineState *ms) {int slit_start, i, j; slit_start = table_data->len; +int nb_numa_nodes = ms->numa_state->num_nodes;acpi_data_push (table_data,sizeof (AcpiTableHeader));
hw/arm/boot.c +2 -2
@@ -598,9 +598,9 @@ int arm_load_dtb(hwaddr addr, const struct arm_boot_info *binfo, }g_strfreev (node_path); -if (nb_numa_nodes >0 ) { +if (ms->numa_state !=NULL && ms->numa_state->num_nodes >0 ) { mem_base = binfo->loader_start; -for (i =0 ; i < nb_numa_nodes; i++) { +for (i =0 ; i < ms->numa_state->num_nodes; i++) { mem_len = numa_info[i].node_mem; rc =fdt_add_memory_node (fdt, acells, mem_base, scells, mem_len, i);
hw/arm/sbsa-ref.c +3 -1
@@ -144,6 +144,7 @@ static void create_fdt(SBSAMachineState *sms) {void *fdt =create_device_tree (&sms->fdt_size);const MachineState *ms =MACHINE (sms); +int nb_numa_nodes = ms->numa_state->num_nodes;int cpu;if (!fdt) {
@@ -760,7 +761,7 @@ sbsa_ref_cpu_index_to_props(MachineState *ms, unsigned cpu_index)static int64_t sbsa_ref_get_default_cpu_node_id (const MachineState *ms,int idx) { -return idx % nb_numa_nodes; +return idx % ms->numa_state->num_nodes; }static void sbsa_ref_instance_init (Object *obj)
@@ -787,6 +788,7 @@ static void sbsa_ref_class_init(ObjectClass *oc, void *data) mc->possible_cpu_arch_ids = sbsa_ref_possible_cpu_arch_ids; mc->cpu_index_to_instance_props = sbsa_ref_cpu_index_to_props; mc->get_default_cpu_node_id = sbsa_ref_get_default_cpu_node_id; + mc->numa_mem_supported = true; }static const TypeInfo sbsa_ref_info = {
hw/arm/virt-acpi-build.c +6 -4
@@ -516,7 +516,8 @@ build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)int i, srat_start;uint64_t mem_base;MachineClass *mc =MACHINE_GET_CLASS (vms); -const CPUArchIdList *cpu_list = mc->possible_cpu_arch_ids (MACHINE (vms)); +MachineState *ms =MACHINE (vms); +const CPUArchIdList *cpu_list = mc->possible_cpu_arch_ids (ms); srat_start = table_data->len; srat =acpi_data_push (table_data,sizeof (*srat));
@@ -532,7 +533,7 @@ build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) } mem_base = vms->memmap[VIRT_MEM ].base; -for (i =0 ; i < nb_numa_nodes; ++i) { +for (i =0 ; i < ms->numa_state->num_nodes; ++i) {if (numa_info[i].node_mem >0 ) { numamem =acpi_data_push (table_data,sizeof (*numamem)); build_srat_memory(numamem, mem_base, numa_info[i].node_mem, i,
@@ -758,6 +759,7 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)GArray *table_offsets;unsigned dsdt, xsdt;GArray *tables_blob = tables->table_data; +MachineState *ms =MACHINE (vms); table_offsets =g_array_new (false, true/* clear */ ,sizeof (uint32_t ));
@@ -792,12 +794,12 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)acpi_add_table (table_offsets, tables_blob);build_spcr (tables_blob, tables->linker, vms); -if (nb_numa_nodes >0 ) { +if (ms->numa_state->num_nodes >0 ) {acpi_add_table (table_offsets, tables_blob);build_srat (tables_blob, tables->linker, vms);if (have_numa_distance) {acpi_add_table (table_offsets, tables_blob); -build_slit (tables_blob, tables->linker); +build_slit (tables_blob, tables->linker, ms); } }
hw/arm/virt.c +3 -1
@@ -199,6 +199,8 @@ static bool cpu_type_valid(const char *cpu)static void create_fdt (VirtMachineState *vms) { +MachineState *ms =MACHINE (vms); +int nb_numa_nodes = ms->numa_state->num_nodes;void *fdt =create_device_tree (&vms->fdt_size);if (!fdt) {
@@ -1842,7 +1844,7 @@ virt_cpu_index_to_props(MachineState *ms, unsigned cpu_index)static int64_t virt_get_default_cpu_node_id (const MachineState *ms,int idx) { -return idx % nb_numa_nodes; +return idx % ms->numa_state->num_nodes; }static const CPUArchIdList *virt_possible_cpu_arch_ids (MachineState *ms)
hw/core/machine-hmp-cmds.c +9 -3
@@ -139,15 +139,21 @@ void hmp_info_memdev(Monitor *mon, const QDict *qdict)void hmp_info_numa (Monitor *mon,const QDict *qdict) { -int i; +int i, nb_numa_nodes;NumaNodeMem *node_mem;CpuInfoList *cpu_list, *cpu; +MachineState *ms =MACHINE (qdev_get_machine ()); + + nb_numa_nodes = ms->numa_state ? ms->numa_state->num_nodes :0 ; +monitor_printf (mon,"%d nodes\n" , nb_numa_nodes); +if (!nb_numa_nodes) { +return ; + } cpu_list =qmp_query_cpus (&error_abort); node_mem =g_new0 (NumaNodeMem, nb_numa_nodes); -query_numa_node_mem (node_mem); -monitor_printf (mon,"%d nodes\n" , nb_numa_nodes); +query_numa_node_mem (node_mem, ms);for (i =0 ; i < nb_numa_nodes; i++) {monitor_printf (mon,"node %d cpus:" , i);for (cpu = cpu_list; cpu; cpu = cpu->next) {
hw/core/machine.c +10 -4
@@ -953,6 +953,9 @@ static void machine_initfn(Object *obj) NULL); } +if (mc->numa_mem_supported) { + ms->numa_state =g_new0 (NumaState,1 ); + }/* Register notifier when init is done for sysbus sanity checks */ ms->sysbus_notifier.notify = machine_init_notify;
@@ -973,6 +976,7 @@ static void machine_finalize(Object *obj)g_free (ms->firmware);g_free (ms->device_memory);g_free (ms->nvdimms_state); +g_free (ms->numa_state); }bool machine_usb (MachineState *machine)
@@ -1047,7 +1051,7 @@ static void machine_numa_finish_cpu_init(MachineState *machine)MachineClass *mc =MACHINE_GET_CLASS (machine);const CPUArchIdList *possible_cpus = mc->possible_cpu_arch_ids (machine); -assert (nb_numa_nodes); +assert (machine->numa_state->num_nodes);for (i =0 ; i < possible_cpus->len; i++) {if (possible_cpus->cpus[i].props.has_node_id) {break ;
@@ -1093,9 +1097,11 @@ void machine_run_board_init(MachineState *machine) {MachineClass *machine_class =MACHINE_GET_CLASS (machine); -numa_complete_configuration (machine); -if (nb_numa_nodes) { -machine_numa_finish_cpu_init (machine); +if (machine_class->numa_mem_supported) { +numa_complete_configuration (machine); +if (machine->numa_state->num_nodes) { +machine_numa_finish_cpu_init (machine); + } }/* If the machine supports the valid_cpu_types check and the user
hw/core/numa.c +35 -25
177 lines not on this page · raw message
hw/i386/acpi-build.c +1 -1
@@ -2694,7 +2694,7 @@ void acpi_build(AcpiBuildTables *tables, MachineState *machine)build_srat (tables_blob, tables->linker, machine);if (have_numa_distance) {acpi_add_table (table_offsets, tables_blob); -build_slit (tables_blob, tables->linker); +build_slit (tables_blob, tables->linker, machine); } }if (acpi_get_mcfg (&mcfg)) {
hw/i386/pc.c +6 -3
@@ -996,6 +996,8 @@ static FWCfgState *bochs_bios_init(AddressSpace *as, PCMachineState *pcms)int i;const CPUArchIdList *cpus;MachineClass *mc =MACHINE_GET_CLASS (pcms); +MachineState *ms =MACHINE (pcms); +int nb_numa_nodes = ms->numa_state->num_nodes; fw_cfg =fw_cfg_init_io_dma (FW_CFG_IO_BASE ,FW_CFG_IO_BASE +4 , as);fw_cfg_add_i16 (fw_cfg,FW_CFG_NB_CPUS , pcms->boot_cpus);
@@ -1759,12 +1761,13 @@ void pc_machine_done(Notifier *notifier, void *data)void pc_guest_info_init (PCMachineState *pcms) {int i; +MachineState *ms =MACHINE (pcms); pcms->apic_xrupt_override =kvm_allows_irq0_override (); - pcms->numa_nodes = nb_numa_nodes; + pcms->numa_nodes = ms->numa_state->num_nodes; pcms->node_mem =g_malloc0 (pcms->numa_nodes *sizeof *pcms->node_mem); -for (i =0 ; i < nb_numa_nodes; i++) { +for (i =0 ; i < ms->numa_state->num_nodes; i++) { pcms->node_mem[i] = numa_info[i].node_mem; }
@@ -2847,7 +2850,7 @@ static int64_t pc_get_default_cpu_node_id(const MachineState *ms, int idx)x86_topo_ids_from_apicid (ms->possible_cpus->cpus[idx].arch_id, pcms->smp_dies, ms->smp.cores, ms->smp.threads, &topo); -return topo.pkg_id % nb_numa_nodes; +return topo.pkg_id % ms->numa_state->num_nodes; }static const CPUArchIdList *pc_possible_cpu_arch_ids (MachineState *ms)
hw/mem/pc-dimm.c +2 -0
@@ -168,6 +168,8 @@ static void pc_dimm_realize(DeviceState *dev, Error **errp) {PCDIMMDevice *dimm =PC_DIMM (dev);PCDIMMDeviceClass *ddc =PC_DIMM_GET_CLASS (dimm); +MachineState *ms =MACHINE (qdev_get_machine ()); +int nb_numa_nodes = ms->numa_state->num_nodes;if (!dimm->hostmem) {error_setg (errp,"'" PC_DIMM_MEMDEV_PROP "' property is not set" );
hw/pci-bridge/pci_expander_bridge.c +7 -1
@@ -212,9 +212,15 @@ static void pxb_dev_realize_common(PCIDevice *dev, bool pcie, Error **errp)PCIBus *bus;const char *dev_name =NULL ;Error *local_err =NULL ; +MachineState *ms =MACHINE (qdev_get_machine ()); + +if (ms->numa_state ==NULL ) { +error_setg (errp,"NUMA is not supported by this machine-type" ); +return ; + }if (pxb->numa_node !=NUMA_NODE_UNASSIGNED && - pxb->numa_node >= nb_numa_nodes) { + pxb->numa_node >= ms->numa_state->num_nodes) {error_setg (errp,"Illegal numa node %d" , pxb->numa_node);return ; }
hw/ppc/spapr.c +10 -9
@@ -331,7 +331,7 @@ static int spapr_fixup_cpu_dt(void *fdt, SpaprMachineState *spapr)return ret; } -if (nb_numa_nodes >1 ) { +if (ms->numa_state->num_nodes >1 ) { ret =spapr_fixup_cpu_numa_dt (fdt, offset, cpu);if (ret <0 ) {return ret;
@@ -351,9 +351,9 @@ static int spapr_fixup_cpu_dt(void *fdt, SpaprMachineState *spapr)static hwaddr spapr_node0_size (MachineState *machine) { -if (nb_numa_nodes) { +if (machine->numa_state->num_nodes) {int i; -for (i =0 ; i < nb_numa_nodes; ++i) { +for (i =0 ; i < machine->numa_state->num_nodes; ++i) {if (numa_info[i].node_mem) {return MIN (pow2floor (numa_info[i].node_mem), machine->ram_size);
@@ -398,12 +398,12 @@ static int spapr_populate_memory(SpaprMachineState *spapr, void *fdt) {MachineState *machine =MACHINE (spapr);hwaddr mem_start, node_size; -int i, nb_nodes = nb_numa_nodes; +int i, nb_nodes = machine->numa_state->num_nodes;NodeInfo *nodes = numa_info;NodeInfo ramnode;/* No NUMA nodes, assume there is just one node with whole RAM */ -if (!nb_numa_nodes) { +if (!nb_nodes) { nb_nodes =1 ; ramnode.node_mem = machine->ram_size; nodes = &ramnode;
@@ -554,7 +554,7 @@ static void spapr_populate_cpu_dt(CPUState *cs, void *fdt, int offset,_FDT ((fdt_setprop (fdt, offset,"ibm,pft-size" , pft_size_prop,sizeof (pft_size_prop)))); -if (nb_numa_nodes >1 ) { +if (ms->numa_state->num_nodes >1 ) {_FDT (spapr_fixup_cpu_numa_dt (fdt, offset, cpu)); }
@@ -861,6 +861,7 @@ static int spapr_populate_drmem_v1(SpaprMachineState *spapr, void *fdt,static int spapr_populate_drconf_memory (SpaprMachineState *spapr,void *fdt) {MachineState *machine =MACHINE (spapr); +int nb_numa_nodes = machine->numa_state->num_nodes;int ret, i, offset;uint64_t lmb_size =SPAPR_MEMORY_BLOCK_SIZE ;uint32_t prop_lmb_size[] = {0 ,cpu_to_be32 (lmb_size)};
@@ -1750,7 +1751,7 @@ static void spapr_machine_reset(MachineState *machine)* The final value of spapr->gpu_numa_id is going to be written to * max-associativity-domains in spapr_build_fdt(). */ - spapr->gpu_numa_id =MAX (1 , nb_numa_nodes); + spapr->gpu_numa_id =MAX (1 , machine->numa_state->num_nodes);qemu_devices_reset ();/*
@@ -2537,7 +2538,7 @@ static void spapr_validate_node_memory(MachineState *machine, Error **errp)return ; } -for (i =0 ; i < nb_numa_nodes; i++) { +for (i =0 ; i < machine->numa_state->num_nodes; i++) {if (numa_info[i].node_mem %SPAPR_MEMORY_BLOCK_SIZE ) {error_setg (errp, "Node %d memory size 0x%" PRIx64
@@ -4139,7 +4140,7 @@ spapr_cpu_index_to_props(MachineState *machine, unsigned cpu_index)static int64_t spapr_get_default_cpu_node_id (const MachineState *ms,int idx) { -return idx / ms->smp.cores % nb_numa_nodes; +return idx / ms->smp.cores % ms->numa_state->num_nodes; }static const CPUArchIdList *spapr_possible_cpu_arch_ids (MachineState *machine)
include/hw/acpi/aml-build.h +1 -1
@@ -414,7 +414,7 @@ build_append_gas_from_struct(GArray *table, const struct AcpiGenericAddress *s)void build_srat_memory (AcpiSratMemoryAffinity *numamem,uint64_t base,uint64_t len,int node,MemoryAffinityFlags flags); -void build_slit (GArray *table_data,BIOSLinker *linker); +void build_slit (GArray *table_data,BIOSLinker *linker,MachineState *ms);void build_fadt (GArray *tbl,BIOSLinker *linker,const AcpiFadtData *f,const char *oem_id,const char *oem_table_id);
include/hw/boards.h +1 -0
@@ -298,6 +298,7 @@ struct MachineState {CPUArchIdList *possible_cpus;CpuTopology smp;struct NVDIMMState *nvdimms_state; +struct NumaState *numa_state; };#define DEFINE_MACHINE (namestr, machine_initfn) \
include/sysemu/numa.h +8 -2
@@ -6,7 +6,6 @@#include "sysemu/hostmem.h" #include "hw/boards.h" -extern int nb_numa_nodes;/* Number of NUMA nodes */ extern bool have_numa_distance;struct NodeInfo {
@@ -23,10 +22,17 @@ struct NumaNodeMem {extern NodeInfo numa_info[MAX_NODES ]; +struct NumaState { +/* Number of NUMA nodes */ +int num_nodes; + +}; +typedef struct NumaState NumaState ; +void set_numa_options (MachineState *ms,NumaOptions *object,Error **errp);void parse_numa_opts (MachineState *ms);void numa_complete_configuration (MachineState *ms); -void query_numa_node_mem (NumaNodeMem node_mem[]); +void query_numa_node_mem (NumaNodeMem node_mem[],MachineState *ms);extern QemuOptsList qemu_numa_opts;void numa_legacy_auto_assign_ram (MachineClass *mc,NodeInfo *nodes,int nb_nodes,ram_addr_t size);
Signature · 1 line
2.20.1
Re: [Qemu-devel] [PATCH RESEND v8 02/11] numa: move numa global variable nb_numa_nodes into MachineState
Quoted 7 lines · On Wed, 31 Jul 2019 09:12:00 +0800 Tao Xu <[email protected]> wrote:
Add struct NumaState in MachineState and move existing numa global
nb_numa_nodes(renamed as "num_nodes")into NumaState. And add variablenuma_supportinto MachineClass to decide which submachines support NUMA.Suggested-by Igor Mammedov <[email protected]>Suggested-by Eduardo Habkost <[email protected]>Signed-off-by Tao Xu <[email protected]>
Quoted 673 lines
---
Changes in v8:
- Add check ifnuma->numa_stateis NULL inpxb_dev_realize_common
- Usenb_nodesinspapr_populate_memory()(Igor)--- exec.c | 5 ++- hw/acpi/aml-build.c | 3 +- hw/arm/boot.c | 4 +- hw/arm/sbsa-ref.c | 4 +- hw/arm/virt-acpi-build.c | 10 +++-- hw/arm/virt.c | 4 +- hw/core/machine-hmp-cmds.c | 12 ++++-- hw/core/machine.c | 14 +++++-- hw/core/numa.c | 60 +++++++++++++++++------------ hw/i386/acpi-build.c | 2 +- hw/i386/pc.c | 9 +++-- hw/mem/pc-dimm.c | 2 + hw/pci-bridge/pci_expander_bridge.c | 8 +++- hw/ppc/spapr.c | 19 ++++----- include/hw/acpi/aml-build.h | 2 +- include/hw/boards.h | 1 + include/sysemu/numa.h | 10 ++++- 17 files changed, 110 insertions(+), 59 deletions(-)exec.c +4
-1@@ -1749,6 +1749,7 @@ long qemu_minrampagesize(void)long hpsize =LONG_MAX ;long mainrampagesize;Object *memdev_root; +MachineState *ms =MACHINE (qdev_get_machine ()); mainrampagesize =qemu_mempath_getpagesize (mem_path);@@ -1776,7 +1777,9 @@ long qemu_minrampagesize(void)* so if its page size is smaller we have got to report that size instead. */ if (hpsize > mainrampagesize && - (nb_numa_nodes ==0 || numa_info[0 ].node_memdev ==NULL )) { + (ms->numa_state ==NULL || + ms->numa_state->num_nodes ==0 || + numa_info[0 ].node_memdev ==NULL )) {static bool warned;if (!warned) {error_report ("Huge page support disabled (n/a for main memory)." );hw/acpi/aml-build.c +2
-1@@ -1726,10 +1726,11 @@ void build_srat_memory(AcpiSratMemoryAffinity *numamem, uint64_t base,* ACPI spec 5.2.17 System Locality Distance Information Table * (Revision 2.0 or later) */ -void build_slit (GArray *table_data,BIOSLinker *linker) +void build_slit (GArray *table_data,BIOSLinker *linker,MachineState *ms) {int slit_start, i, j; slit_start = table_data->len; +int nb_numa_nodes = ms->numa_state->num_nodes;acpi_data_push (table_data,sizeof (AcpiTableHeader));hw/arm/boot.c +2
-2@@ -598,9 +598,9 @@ int arm_load_dtb(hwaddr addr, const struct arm_boot_info *binfo, }g_strfreev (node_path); -if (nb_numa_nodes >0 ) { +if (ms->numa_state !=NULL && ms->numa_state->num_nodes >0 ) { mem_base = binfo->loader_start; -for (i =0 ; i < nb_numa_nodes; i++) { +for (i =0 ; i < ms->numa_state->num_nodes; i++) { mem_len = numa_info[i].node_mem; rc =fdt_add_memory_node (fdt, acells, mem_base, scells, mem_len, i);hw/arm/sbsa-ref.c +3
-1@@ -144,6 +144,7 @@ static void create_fdt(SBSAMachineState *sms) {void *fdt =create_device_tree (&sms->fdt_size);const MachineState *ms =MACHINE (sms); +int nb_numa_nodes = ms->numa_state->num_nodes;int cpu;if (!fdt) {@@ -760,7 +761,7 @@ sbsa_ref_cpu_index_to_props(MachineState *ms, unsigned cpu_index)static int64_t sbsa_ref_get_default_cpu_node_id (const MachineState *ms,int idx) { -return idx % nb_numa_nodes; +return idx % ms->numa_state->num_nodes; }static void sbsa_ref_instance_init (Object *obj)@@ -787,6 +788,7 @@ static void sbsa_ref_class_init(ObjectClass *oc, void *data) mc->possible_cpu_arch_ids = sbsa_ref_possible_cpu_arch_ids; mc->cpu_index_to_instance_props = sbsa_ref_cpu_index_to_props; mc->get_default_cpu_node_id = sbsa_ref_get_default_cpu_node_id; + mc->numa_mem_supported = true; }static const TypeInfo sbsa_ref_info = {hw/arm/virt-acpi-build.c +6
-4@@ -516,7 +516,8 @@ build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)int i, srat_start;uint64_t mem_base;MachineClass *mc =MACHINE_GET_CLASS (vms); -const CPUArchIdList *cpu_list = mc->possible_cpu_arch_ids (MACHINE (vms)); +MachineState *ms =MACHINE (vms); +const CPUArchIdList *cpu_list = mc->possible_cpu_arch_ids (ms); srat_start = table_data->len; srat =acpi_data_push (table_data,sizeof (*srat));@@ -532,7 +533,7 @@ build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) } mem_base = vms->memmap[VIRT_MEM ].base; -for (i =0 ; i < nb_numa_nodes; ++i) { +for (i =0 ; i < ms->numa_state->num_nodes; ++i) {if (numa_info[i].node_mem >0 ) { numamem =acpi_data_push (table_data,sizeof (*numamem)); build_srat_memory(numamem, mem_base, numa_info[i].node_mem, i,@@ -758,6 +759,7 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)GArray *table_offsets;unsigned dsdt, xsdt;GArray *tables_blob = tables->table_data; +MachineState *ms =MACHINE (vms); table_offsets =g_array_new (false, true/* clear */ ,sizeof (uint32_t ));@@ -792,12 +794,12 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)acpi_add_table (table_offsets, tables_blob);build_spcr (tables_blob, tables->linker, vms); -if (nb_numa_nodes >0 ) { +if (ms->numa_state->num_nodes >0 ) {acpi_add_table (table_offsets, tables_blob);build_srat (tables_blob, tables->linker, vms);if (have_numa_distance) {acpi_add_table (table_offsets, tables_blob); -build_slit (tables_blob, tables->linker); +build_slit (tables_blob, tables->linker, ms); } }hw/arm/virt.c +3
-1@@ -199,6 +199,8 @@ static bool cpu_type_valid(const char *cpu)static void create_fdt (VirtMachineState *vms) { +MachineState *ms =MACHINE (vms); +int nb_numa_nodes = ms->numa_state->num_nodes;void *fdt =create_device_tree (&vms->fdt_size);if (!fdt) {@@ -1842,7 +1844,7 @@ virt_cpu_index_to_props(MachineState *ms, unsigned cpu_index)static int64_t virt_get_default_cpu_node_id (const MachineState *ms,int idx) { -return idx % nb_numa_nodes; +return idx % ms->numa_state->num_nodes; }static const CPUArchIdList *virt_possible_cpu_arch_ids (MachineState *ms)hw/core/machine-hmp-cmds.c +9
-3@@ -139,15 +139,21 @@ void hmp_info_memdev(Monitor *mon, const QDict *qdict)void hmp_info_numa (Monitor *mon,const QDict *qdict) { -int i; +int i, nb_numa_nodes;NumaNodeMem *node_mem;CpuInfoList *cpu_list, *cpu; +MachineState *ms =MACHINE (qdev_get_machine ()); + + nb_numa_nodes = ms->numa_state ? ms->numa_state->num_nodes :0 ; +monitor_printf (mon,"%d nodes\n" , nb_numa_nodes); +if (!nb_numa_nodes) { +return ; + } cpu_list =qmp_query_cpus (&error_abort); node_mem =g_new0 (NumaNodeMem, nb_numa_nodes); -query_numa_node_mem (node_mem); -monitor_printf (mon,"%d nodes\n" , nb_numa_nodes); +query_numa_node_mem (node_mem, ms);for (i =0 ; i < nb_numa_nodes; i++) {monitor_printf (mon,"node %d cpus:" , i);for (cpu = cpu_list; cpu; cpu = cpu->next) {hw/core/machine.c +10
-4@@ -953,6 +953,9 @@ static void machine_initfn(Object *obj) NULL); } +if (mc->numa_mem_supported) { + ms->numa_state =g_new0 (NumaState,1 ); + }/* Register notifier when init is done for sysbus sanity checks */ ms->sysbus_notifier.notify = machine_init_notify;@@ -973,6 +976,7 @@ static void machine_finalize(Object *obj)g_free (ms->firmware);g_free (ms->device_memory);g_free (ms->nvdimms_state); +g_free (ms->numa_state); }bool machine_usb (MachineState *machine)@@ -1047,7 +1051,7 @@ static void machine_numa_finish_cpu_init(MachineState *machine)MachineClass *mc =MACHINE_GET_CLASS (machine);const CPUArchIdList *possible_cpus = mc->possible_cpu_arch_ids (machine); -assert (nb_numa_nodes); +assert (machine->numa_state->num_nodes);for (i =0 ; i < possible_cpus->len; i++) {if (possible_cpus->cpus[i].props.has_node_id) {break ;@@ -1093,9 +1097,11 @@ void machine_run_board_init(MachineState *machine) {MachineClass *machine_class =MACHINE_GET_CLASS (machine); -numa_complete_configuration (machine); -if (nb_numa_nodes) { -machine_numa_finish_cpu_init (machine); +if (machine_class->numa_mem_supported) { +numa_complete_configuration (machine); +if (machine->numa_state->num_nodes) { +machine_numa_finish_cpu_init (machine); + } }/* If the machine supports the valid_cpu_types check and the user hw/core/numa.c +35
-25@@ -50,7 +50,6 @@ static int have_mem;static int max_numa_nodeid;/* Highest specified NUMA node ID, plus one. * For all nodes, nodeid < max_numa_nodeid */ -int nb_numa_nodes;bool have_numa_distance;NodeInfo numa_info[MAX_NODES ];@@ -67,7 +66,7 @@ static void parse_numa_node(MachineState *ms, NumaNodeOptions *node,if (node->has_nodeid) { nodenr = node->nodeid; }else { - nodenr = nb_numa_nodes; + nodenr = ms->numa_state->num_nodes; }if (nodenr >=MAX_NODES ) {@@ -133,10 +132,11 @@ static void parse_numa_node(MachineState *ms, NumaNodeOptions *node, } numa_info[nodenr].present = true; max_numa_nodeid =MAX (max_numa_nodeid, nodenr +1 ); - nb_numa_nodes++; + ms->numa_state->num_nodes++; } -static void parse_numa_distance (NumaDistOptions *dist,Error **errp) +static +void parse_numa_distance (MachineState *ms,NumaDistOptions *dist,Error **errp) {uint16_t src = dist->src;uint16_t dst = dist->dst;@@ -174,6 +174,12 @@ static void parse_numa_distance(NumaDistOptions *dist, Error **errp)void set_numa_options (MachineState *ms,NumaOptions *object,Error **errp) {Error *err =NULL ; +MachineClass *mc =MACHINE_GET_CLASS (ms); + +if (!mc->numa_mem_supported) { +error_setg (errp,"NUMA is not supported by this machine-type" ); + goto end; + }switch (object->type) {case NUMA_OPTIONS_TYPE_NODE :@@ -183,7 +189,7 @@ void set_numa_options(MachineState *ms, NumaOptions *object, Error **errp) }break ;case NUMA_OPTIONS_TYPE_DIST : -parse_numa_distance (&object->u.dist, &err); +parse_numa_distance (ms, &object->u.dist, &err);if (err) { goto end; }@@ -248,10 +254,11 @@ end:* distance from a node to itself is always NUMA_DISTANCE_MIN, * so providing it is never necessary. */ -static void validate_numa_distance (void ) +static void validate_numa_distance (MachineState *ms) {int src, dst;bool is_asymmetrical = false; +int nb_numa_nodes = ms->numa_state->num_nodes;for (src =0 ; src < nb_numa_nodes; src++) {for (dst = src; dst < nb_numa_nodes; dst++) {@@ -289,7 +296,7 @@ static void validate_numa_distance(void) } } -static void complete_init_numa_distance (void ) +static void complete_init_numa_distance (MachineState *ms) {int src, dst;@@ -298,8 +305,8 @@ static void complete_init_numa_distance(void)* there would not be any missing distance except local node, which * is verified by validate_numa_distance above. */ -for (src =0 ; src < nb_numa_nodes; src++) { -for (dst =0 ; dst < nb_numa_nodes; dst++) { +for (src =0 ; src < ms->numa_state->num_nodes; src++) { +for (dst =0 ; dst < ms->numa_state->num_nodes; dst++) {if (numa_info[src].distance[dst] ==0 ) {if (src == dst) { numa_info[src].distance[dst] =NUMA_DISTANCE_MIN ;@@ -365,7 +372,7 @@ void numa_complete_configuration(MachineState *ms)* * Enable NUMA implicitly by adding a new NUMA node automatically. */ -if (ms->ram_slots >0 && nb_numa_nodes ==0 && +if (ms->ram_slots >0 && ms->numa_state->num_nodes ==0 && mc->auto_enable_numa_with_memhp) {NumaNodeOptions node = { };parse_numa_node (ms, &node, &error_abort);@@ -383,26 +390,27 @@ void numa_complete_configuration(MachineState *ms) }/* This must be always true if all nodes are present: */ -assert (nb_numa_nodes == max_numa_nodeid); +assert (ms->numa_state->num_nodes == max_numa_nodeid); -if (nb_numa_nodes >0 ) { +if (ms->numa_state->num_nodes >0 ) {uint64_t numa_total; -if (nb_numa_nodes >MAX_NODES ) { - nb_numa_nodes =MAX_NODES ; +if (ms->numa_state->num_nodes >MAX_NODES ) { + ms->numa_state->num_nodes =MAX_NODES ; }/* If no memory size is given for any node, assume the default case * and distribute the available memory equally across all nodes */ -for (i =0 ; i < nb_numa_nodes; i++) { +for (i =0 ; i < ms->numa_state->num_nodes; i++) {if (numa_info[i].node_mem !=0 ) {break ; } } -if (i == nb_numa_nodes) { +if (i == ms->numa_state->num_nodes) {assert (mc->numa_auto_assign_ram); - mc->numa_auto_assign_ram (mc, numa_info, nb_numa_nodes, ram_size); + mc->numa_auto_assign_ram (mc, numa_info, + ms->numa_state->num_nodes, ram_size);if (!qtest_enabled ()) {warn_report ("Default splitting of RAM between nodes is deprecated," " Use '-numa node,memdev' to explictly define RAM"@@ -411,7 +419,7 @@ void numa_complete_configuration(MachineState *ms) } numa_total =0 ; -for (i =0 ; i < nb_numa_nodes; i++) { +for (i =0 ; i < ms->numa_state->num_nodes; i++) { numa_total += numa_info[i].node_mem; }if (numa_total != ram_size) {@@ -435,10 +443,10 @@ void numa_complete_configuration(MachineState *ms)*/ if (have_numa_distance) {/* Validate enough NUMA distance information was provided. */ -validate_numa_distance (); +validate_numa_distance (ms);/* Validation succeeded, now fill in any missing distances. */ -complete_init_numa_distance (); +complete_init_numa_distance (ms); } } }@@ -505,14 +513,16 @@ void memory_region_allocate_system_memory(MemoryRegion *mr, Object *owner, {uint64_t addr =0 ;int i; +MachineState *ms =MACHINE (qdev_get_machine ()); -if (nb_numa_nodes ==0 || !have_memdevs) { +if (ms->numa_state ==NULL || + ms->numa_state->num_nodes ==0 || !have_memdevs) {allocate_system_memory_nonnuma (mr, owner, name, ram_size);return ; }memory_region_init (mr, owner, name, ram_size); -for (i =0 ; i < nb_numa_nodes; i++) { +for (i =0 ; i < ms->numa_state->num_nodes; i++) {uint64_t size = numa_info[i].node_mem;HostMemoryBackend *backend = numa_info[i].node_memdev;if (!backend) {@@ -570,16 +580,16 @@ static void numa_stat_memory_devices(NumaNodeMem node_mem[])qapi_free_MemoryDeviceInfoList (info_list); } -void query_numa_node_mem (NumaNodeMem node_mem[]) +void query_numa_node_mem (NumaNodeMem node_mem[],MachineState *ms) {int i; -if (nb_numa_nodes <=0 ) { +if (ms->numa_state ==NULL || ms->numa_state->num_nodes <=0 ) {return ; }numa_stat_memory_devices (node_mem); -for (i =0 ; i < nb_numa_nodes; i++) { +for (i =0 ; i < ms->numa_state->num_nodes; i++) { node_mem[i].node_mem += numa_info[i].node_mem; } }hw/i386/acpi-build.c +1
-1@@ -2694,7 +2694,7 @@ void acpi_build(AcpiBuildTables *tables, MachineState *machine)build_srat (tables_blob, tables->linker, machine);if (have_numa_distance) {acpi_add_table (table_offsets, tables_blob); -build_slit (tables_blob, tables->linker); +build_slit (tables_blob, tables->linker, machine); } }if (acpi_get_mcfg (&mcfg)) {hw/i386/pc.c +6
-3@@ -996,6 +996,8 @@ static FWCfgState *bochs_bios_init(AddressSpace *as, PCMachineState *pcms)int i;const CPUArchIdList *cpus;MachineClass *mc =MACHINE_GET_CLASS (pcms); +MachineState *ms =MACHINE (pcms); +int nb_numa_nodes = ms->numa_state->num_nodes; fw_cfg =fw_cfg_init_io_dma (FW_CFG_IO_BASE ,FW_CFG_IO_BASE +4 , as);fw_cfg_add_i16 (fw_cfg,FW_CFG_NB_CPUS , pcms->boot_cpus);@@ -1759,12 +1761,13 @@ void pc_machine_done(Notifier *notifier, void *data)void pc_guest_info_init (PCMachineState *pcms) {int i; +MachineState *ms =MACHINE (pcms); pcms->apic_xrupt_override =kvm_allows_irq0_override (); - pcms->numa_nodes = nb_numa_nodes; + pcms->numa_nodes = ms->numa_state->num_nodes; pcms->node_mem =g_malloc0 (pcms->numa_nodes *sizeof *pcms->node_mem); -for (i =0 ; i < nb_numa_nodes; i++) { +for (i =0 ; i < ms->numa_state->num_nodes; i++) { pcms->node_mem[i] = numa_info[i].node_mem; }@@ -2847,7 +2850,7 @@ static int64_t pc_get_default_cpu_node_id(const MachineState *ms, int idx)x86_topo_ids_from_apicid (ms->possible_cpus->cpus[idx].arch_id, pcms->smp_dies, ms->smp.cores, ms->smp.threads, &topo); -return topo.pkg_id % nb_numa_nodes; +return topo.pkg_id % ms->numa_state->num_nodes; }static const CPUArchIdList *pc_possible_cpu_arch_ids (MachineState *ms)hw/mem/pc-dimm.c +2
-0@@ -168,6 +168,8 @@ static void pc_dimm_realize(DeviceState *dev, Error **errp) {PCDIMMDevice *dimm =PC_DIMM (dev);PCDIMMDeviceClass *ddc =PC_DIMM_GET_CLASS (dimm); +MachineState *ms =MACHINE (qdev_get_machine ()); +int nb_numa_nodes = ms->numa_state->num_nodes;if (!dimm->hostmem) {error_setg (errp,"'" PC_DIMM_MEMDEV_PROP "' property is not set" );hw/pci-bridge/pci_expander_bridge.c +7
-1@@ -212,9 +212,15 @@ static void pxb_dev_realize_common(PCIDevice *dev, bool pcie, Error **errp)PCIBus *bus;const char *dev_name =NULL ;Error *local_err =NULL ; +MachineState *ms =MACHINE (qdev_get_machine ()); + +if (ms->numa_state ==NULL ) { +error_setg (errp,"NUMA is not supported by this machine-type" ); +return ; + }if (pxb->numa_node !=NUMA_NODE_UNASSIGNED && - pxb->numa_node >= nb_numa_nodes) { + pxb->numa_node >= ms->numa_state->num_nodes) {error_setg (errp,"Illegal numa node %d" , pxb->numa_node);return ; }hw/ppc/spapr.c +10
-9@@ -331,7 +331,7 @@ static int spapr_fixup_cpu_dt(void *fdt, SpaprMachineState *spapr)return ret; } -if (nb_numa_nodes >1 ) { +if (ms->numa_state->num_nodes >1 ) { ret =spapr_fixup_cpu_numa_dt (fdt, offset, cpu);if (ret <0 ) {return ret;@@ -351,9 +351,9 @@ static int spapr_fixup_cpu_dt(void *fdt, SpaprMachineState *spapr)static hwaddr spapr_node0_size (MachineState *machine) { -if (nb_numa_nodes) { +if (machine->numa_state->num_nodes) {int i; -for (i =0 ; i < nb_numa_nodes; ++i) { +for (i =0 ; i < machine->numa_state->num_nodes; ++i) {if (numa_info[i].node_mem) {return MIN (pow2floor (numa_info[i].node_mem), machine->ram_size);@@ -398,12 +398,12 @@ static int spapr_populate_memory(SpaprMachineState *spapr, void *fdt) {MachineState *machine =MACHINE (spapr);hwaddr mem_start, node_size; -int i, nb_nodes = nb_numa_nodes; +int i, nb_nodes = machine->numa_state->num_nodes;NodeInfo *nodes = numa_info;NodeInfo ramnode;/* No NUMA nodes, assume there is just one node with whole RAM */ -if (!nb_numa_nodes) { +if (!nb_nodes) { nb_nodes =1 ; ramnode.node_mem = machine->ram_size; nodes = &ramnode;@@ -554,7 +554,7 @@ static void spapr_populate_cpu_dt(CPUState *cs, void *fdt, int offset,_FDT ((fdt_setprop (fdt, offset,"ibm,pft-size" , pft_size_prop,sizeof (pft_size_prop)))); -if (nb_numa_nodes >1 ) { +if (ms->numa_state->num_nodes >1 ) {_FDT (spapr_fixup_cpu_numa_dt (fdt, offset, cpu)); }@@ -861,6 +861,7 @@ static int spapr_populate_drmem_v1(SpaprMachineState *spapr, void *fdt,static int spapr_populate_drconf_memory (SpaprMachineState *spapr,void *fdt) {MachineState *machine =MACHINE (spapr); +int nb_numa_nodes = machine->numa_state->num_nodes;int ret, i, offset;uint64_t lmb_size =SPAPR_MEMORY_BLOCK_SIZE ;uint32_t prop_lmb_size[] = {0 ,cpu_to_be32 (lmb_size)};@@ -1750,7 +1751,7 @@ static void spapr_machine_reset(MachineState *machine)* The final value of spapr->gpu_numa_id is going to be written to * max-associativity-domains in spapr_build_fdt(). */ - spapr->gpu_numa_id =MAX (1 , nb_numa_nodes); + spapr->gpu_numa_id =MAX (1 , machine->numa_state->num_nodes);qemu_devices_reset ();/* @@ -2537,7 +2538,7 @@ static void spapr_validate_node_memory(MachineState *machine, Error **errp)return ; } -for (i =0 ; i < nb_numa_nodes; i++) { +for (i =0 ; i < machine->numa_state->num_nodes; i++) {if (numa_info[i].node_mem %SPAPR_MEMORY_BLOCK_SIZE ) {error_setg (errp, "Node %d memory size 0x%" PRIx64@@ -4139,7 +4140,7 @@ spapr_cpu_index_to_props(MachineState *machine, unsigned cpu_index)static int64_t spapr_get_default_cpu_node_id (const MachineState *ms,int idx) { -return idx / ms->smp.cores % nb_numa_nodes; +return idx / ms->smp.cores % ms->numa_state->num_nodes; }static const CPUArchIdList *spapr_possible_cpu_arch_ids (MachineState *machine)include/hw/acpi/aml-build.h +1
-1@@ -414,7 +414,7 @@ build_append_gas_from_struct(GArray *table, const struct AcpiGenericAddress *s)void build_srat_memory (AcpiSratMemoryAffinity *numamem,uint64_t base,uint64_t len,int node,MemoryAffinityFlags flags); -void build_slit (GArray *table_data,BIOSLinker *linker); +void build_slit (GArray *table_data,BIOSLinker *linker,MachineState *ms);void build_fadt (GArray *tbl,BIOSLinker *linker,const AcpiFadtData *f,const char *oem_id,const char *oem_table_id);include/hw/boards.h +1
-0@@ -298,6 +298,7 @@ struct MachineState {CPUArchIdList *possible_cpus;CpuTopology smp;struct NVDIMMState *nvdimms_state; +struct NumaState *numa_state; };#define DEFINE_MACHINE (namestr, machine_initfn) \include/sysemu/numa.h +8
-2@@ -6,7 +6,6 @@#include "sysemu/hostmem.h" #include "hw/boards.h" -extern int nb_numa_nodes;/* Number of NUMA nodes */ extern bool have_numa_distance;struct NodeInfo {@@ -23,10 +22,17 @@ struct NumaNodeMem {extern NodeInfo numa_info[MAX_NODES ]; +struct NumaState { +/* Number of NUMA nodes */ +int num_nodes; + +}; +typedef struct NumaState NumaState ; +void set_numa_options (MachineState *ms,NumaOptions *object,Error **errp);void parse_numa_opts (MachineState *ms);void numa_complete_configuration (MachineState *ms); -void query_numa_node_mem (NumaNodeMem node_mem[]); +void query_numa_node_mem (NumaNodeMem node_mem[],MachineState *ms);extern QemuOptsList qemu_numa_opts;void numa_legacy_auto_assign_ram (MachineClass *mc,NodeInfo *nodes,int nb_nodes,ram_addr_t size);
PATCH RESEND v8 3/11 numa: move numa global variable have_numa_distance into MachineState
In reply to Tao XuMove existing numa global have_numa_distance into NumaState.
---
No changes in v8.
--- hw/arm/sbsa-ref.c | 2 +- hw/arm/virt-acpi-build.c | 2 +- hw/arm/virt.c | 2 +- hw/core/numa.c | 5 ++--- hw/i386/acpi-build.c | 2 +- include/sysemu/numa.h | 4 ++-- 6 files changed, 8 insertions(+), 9 deletions(-)
hw/arm/sbsa-ref.c +1 -1
@@ -158,7 +158,7 @@ static void create_fdt(SBSAMachineState *sms)qemu_fdt_setprop_cell (fdt,"/" ,"#address-cells" ,0x2 );qemu_fdt_setprop_cell (fdt,"/" ,"#size-cells" ,0x2 ); -if (have_numa_distance) { +if (ms->numa_state->have_numa_distance) {int size = nb_numa_nodes * nb_numa_nodes *3 *sizeof (uint32_t );uint32_t *matrix =g_malloc0 (size);int idx, i, j;
hw/arm/virt-acpi-build.c +1 -1
@@ -797,7 +797,7 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)if (ms->numa_state->num_nodes >0 ) {acpi_add_table (table_offsets, tables_blob);build_srat (tables_blob, tables->linker, vms); -if (have_numa_distance) { +if (ms->numa_state->have_numa_distance) {acpi_add_table (table_offsets, tables_blob);build_slit (tables_blob, tables->linker, ms); }
hw/arm/virt.c +1 -1
@@ -232,7 +232,7 @@ static void create_fdt(VirtMachineState *vms) "clk24mhz");qemu_fdt_setprop_cell (fdt,"/apb-pclk" ,"phandle" , vms->clock_phandle); -if (have_numa_distance) { +if (nb_numa_nodes >0 && ms->numa_state->have_numa_distance) {int size = nb_numa_nodes * nb_numa_nodes *3 *sizeof (uint32_t );uint32_t *matrix =g_malloc0 (size);int idx, i, j;
hw/core/numa.c +2 -3
@@ -50,7 +50,6 @@ static int have_mem;static int max_numa_nodeid;/* Highest specified NUMA node ID, plus one. * For all nodes, nodeid < max_numa_nodeid */ -bool have_numa_distance;NodeInfo numa_info[MAX_NODES ];
@@ -168,7 +167,7 @@ void parse_numa_distance(MachineState *ms, NumaDistOptions *dist, Error **errp) } numa_info[src].distance[dst] = val; - have_numa_distance = true; + ms->numa_state->have_numa_distance = true; }void set_numa_options (MachineState *ms,NumaOptions *object,Error **errp)
@@ -441,7 +440,7 @@ void numa_complete_configuration(MachineState *ms)* asymmetric. In this case, the distances for both directions * of all node pairs are required. */ -if (have_numa_distance) { +if (ms->numa_state->have_numa_distance) {/* Validate enough NUMA distance information was provided. */ validate_numa_distance (ms);
hw/i386/acpi-build.c +1 -1
@@ -2692,7 +2692,7 @@ void acpi_build(AcpiBuildTables *tables, MachineState *machine)if (pcms->numa_nodes) {acpi_add_table (table_offsets, tables_blob);build_srat (tables_blob, tables->linker, machine); -if (have_numa_distance) { +if (machine->numa_state->have_numa_distance) {acpi_add_table (table_offsets, tables_blob);build_slit (tables_blob, tables->linker, machine); }
include/sysemu/numa.h +2 -2
@@ -6,8 +6,6 @@#include "sysemu/hostmem.h" #include "hw/boards.h" -extern bool have_numa_distance; -struct NodeInfo {uint64_t node_mem;struct HostMemoryBackend *node_memdev;
@@ -26,6 +24,8 @@ struct NumaState {/* Number of NUMA nodes */ int num_nodes; +/* Allow setting NUMA distance for different NUMA nodes */ +bool have_numa_distance; };typedef struct NumaState NumaState ;
Signature · 1 line
2.20.1
PATCH RESEND v8 4/11 numa: move numa global variable numa_info into MachineState
In reply to Tao XuMove existing numa global numa_info (renamed as "nodes") into NumaState.
---
No changes in v8.
--- exec.c | 2 +- hw/acpi/aml-build.c | 6 ++++-- hw/arm/boot.c | 2 +- hw/arm/sbsa-ref.c | 3 ++- hw/arm/virt-acpi-build.c | 7 ++++--- hw/arm/virt.c | 3 ++- hw/core/numa.c | 15 +++++++++------ hw/i386/pc.c | 4 ++-- hw/ppc/spapr.c | 10 +++++----- hw/ppc/spapr_pci.c | 4 +++- include/sysemu/numa.h | 5 +++-- 11 files changed, 36 insertions(+), 25 deletions(-)
exec.c +1 -1
@@ -1779,7 +1779,7 @@ long qemu_minrampagesize(void)if (hpsize > mainrampagesize && (ms->numa_state ==NULL || ms->numa_state->num_nodes ==0 || - numa_info[0 ].node_memdev ==NULL )) { + ms->numa_state->nodes[0 ].node_memdev ==NULL )) {static bool warned;if (!warned) {error_report ("Huge page support disabled (n/a for main memory)." );
hw/acpi/aml-build.c +4 -2
@@ -1737,8 +1737,10 @@ void build_slit(GArray *table_data, BIOSLinker *linker, MachineState *ms)build_append_int_noprefix (table_data, nb_numa_nodes,8 );for (i =0 ; i < nb_numa_nodes; i++) {for (j =0 ; j < nb_numa_nodes; j++) { -assert (numa_info[i].distance[j]); -build_append_int_noprefix (table_data, numa_info[i].distance[j],1 ); +assert (ms->numa_state->nodes[i].distance[j]); +build_append_int_noprefix (table_data, + ms->numa_state->nodes[i].distance[j], +1 ); } }
hw/arm/boot.c +1 -1
@@ -601,7 +601,7 @@ int arm_load_dtb(hwaddr addr, const struct arm_boot_info *binfo,if (ms->numa_state !=NULL && ms->numa_state->num_nodes >0 ) { mem_base = binfo->loader_start;for (i =0 ; i < ms->numa_state->num_nodes; i++) { - mem_len = numa_info[i].node_mem; + mem_len = ms->numa_state->nodes[i].node_mem; rc =fdt_add_memory_node (fdt, acells, mem_base, scells, mem_len, i);if (rc <0 ) {
hw/arm/sbsa-ref.c +2 -1
@@ -168,7 +168,8 @@ static void create_fdt(SBSAMachineState *sms) idx = (i * nb_numa_nodes + j) *3 ; matrix[idx +0 ] =cpu_to_be32 (i); matrix[idx +1 ] =cpu_to_be32 (j); - matrix[idx +2 ] =cpu_to_be32 (numa_info[i].distance[j]); + matrix[idx +2 ] = +cpu_to_be32 (ms->numa_state->nodes[i].distance[j]); } }
hw/arm/virt-acpi-build.c +4 -3
@@ -534,11 +534,12 @@ build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) mem_base = vms->memmap[VIRT_MEM ].base;for (i =0 ; i < ms->numa_state->num_nodes; ++i) { -if (numa_info[i].node_mem >0 ) { +if (ms->numa_state->nodes[i].node_mem >0 ) { numamem =acpi_data_push (table_data,sizeof (*numamem)); -build_srat_memory (numamem, mem_base, numa_info[i].node_mem, i, +build_srat_memory (numamem, mem_base, + ms->numa_state->nodes[i].node_mem, i,MEM_AFFINITY_ENABLED ); - mem_base += numa_info[i].node_mem; + mem_base += ms->numa_state->nodes[i].node_mem; } }
hw/arm/virt.c +2 -1
@@ -242,7 +242,8 @@ static void create_fdt(VirtMachineState *vms) idx = (i * nb_numa_nodes + j) *3 ; matrix[idx +0 ] =cpu_to_be32 (i); matrix[idx +1 ] =cpu_to_be32 (j); - matrix[idx +2 ] =cpu_to_be32 (numa_info[i].distance[j]); + matrix[idx +2 ] = +cpu_to_be32 (ms->numa_state->nodes[i].distance[j]); } }
hw/core/numa.c +9 -6
@@ -50,8 +50,6 @@ static int have_mem;static int max_numa_nodeid;/* Highest specified NUMA node ID, plus one. * For all nodes, nodeid < max_numa_nodeid */ -NodeInfo numa_info[MAX_NODES ]; -static void parse_numa_node (MachineState *ms,NumaNodeOptions *node,Error **errp)
@@ -61,6 +59,7 @@ static void parse_numa_node(MachineState *ms, NumaNodeOptions *node,uint16List *cpus =NULL ;MachineClass *mc =MACHINE_GET_CLASS (ms);unsigned int max_cpus = ms->smp.max_cpus; +NodeInfo *numa_info = ms->numa_state->nodes;if (node->has_nodeid) { nodenr = node->nodeid;
@@ -140,6 +139,7 @@ void parse_numa_distance(MachineState *ms, NumaDistOptions *dist, Error **errp)uint16_t src = dist->src;uint16_t dst = dist->dst;uint8_t val = dist->val; +NodeInfo *numa_info = ms->numa_state->nodes;if (src >=MAX_NODES || dst >=MAX_NODES ) { error_setg(errp, "Parameter '%s' expects an integer between 0 and %d",
@@ -198,7 +198,7 @@ void set_numa_options(MachineState *ms, NumaOptions *object, Error **errp)error_setg (&err,"Missing mandatory node-id property" ); goto end; } -if (!numa_info[object->u.cpu.node_id].present) { +if (!ms->numa_state->nodes[object->u.cpu.node_id].present) {error_setg (&err,"Invalid node-id=%" PRId64", NUMA node must be " "defined with -numa node,nodeid=ID before it's used with " "-numa cpu,node-id=ID" , object->u.cpu.node_id);
@@ -258,6 +258,7 @@ static void validate_numa_distance(MachineState *ms)int src, dst;bool is_asymmetrical = false;int nb_numa_nodes = ms->numa_state->num_nodes; +NodeInfo *numa_info = ms->numa_state->nodes;for (src =0 ; src < nb_numa_nodes; src++) {for (dst = src; dst < nb_numa_nodes; dst++) {
@@ -298,6 +299,7 @@ static void validate_numa_distance(MachineState *ms)static void complete_init_numa_distance (MachineState *ms) {int src, dst; +NodeInfo *numa_info = ms->numa_state->nodes;/* Fixup NUMA distance by symmetric policy because if it is an * asymmetric distance table, it should be a complete table and
@@ -357,6 +359,7 @@ void numa_complete_configuration(MachineState *ms) {int i;MachineClass *mc =MACHINE_GET_CLASS (ms); +NodeInfo *numa_info = ms->numa_state->nodes;/* * If memory hotplug is enabled (slots > 0) but without '-numa'
@@ -522,8 +525,8 @@ void memory_region_allocate_system_memory(MemoryRegion *mr, Object *owner,memory_region_init (mr, owner, name, ram_size);for (i =0 ; i < ms->numa_state->num_nodes; i++) { -uint64_t size = numa_info[i].node_mem; -HostMemoryBackend *backend = numa_info[i].node_memdev; +uint64_t size = ms->numa_state->nodes[i].node_mem; +HostMemoryBackend *backend = ms->numa_state->nodes[i].node_memdev;if (!backend) {continue ; }
@@ -589,7 +592,7 @@ void query_numa_node_mem(NumaNodeMem node_mem[], MachineState *ms)numa_stat_memory_devices (node_mem);for (i =0 ; i < ms->numa_state->num_nodes; i++) { - node_mem[i].node_mem += numa_info[i].node_mem; + node_mem[i].node_mem += ms->numa_state->nodes[i].node_mem; } }
hw/i386/pc.c +2 -2
@@ -1040,7 +1040,7 @@ static FWCfgState *bochs_bios_init(AddressSpace *as, PCMachineState *pcms) }for (i =0 ; i < nb_numa_nodes; i++) { numa_fw_cfg[pcms->apic_id_limit +1 + i] = -cpu_to_le64 (numa_info[i].node_mem); +cpu_to_le64 (ms->numa_state->nodes[i].node_mem); } fw_cfg_add_bytes(fw_cfg, FW_CFG_NUMA, numa_fw_cfg, (1 + pcms->apic_id_limit + nb_numa_nodes) *
@@ -1768,7 +1768,7 @@ void pc_guest_info_init(PCMachineState *pcms) pcms->node_mem =g_malloc0 (pcms->numa_nodes *sizeof *pcms->node_mem);for (i =0 ; i < ms->numa_state->num_nodes; i++) { - pcms->node_mem[i] = numa_info[i].node_mem; + pcms->node_mem[i] = ms->numa_state->nodes[i].node_mem; } pcms->machine_done.notify = pc_machine_done;
hw/ppc/spapr.c +5 -5
@@ -354,8 +354,8 @@ static hwaddr spapr_node0_size(MachineState *machine)if (machine->numa_state->num_nodes) {int i;for (i =0 ; i < machine->numa_state->num_nodes; ++i) { -if (numa_info[i].node_mem) { -return MIN (pow2floor (numa_info[i].node_mem), +if (machine->numa_state->nodes[i].node_mem) { +return MIN (pow2floor (machine->numa_state->nodes[i].node_mem), machine->ram_size); } }
@@ -399,7 +399,7 @@ static int spapr_populate_memory(SpaprMachineState *spapr, void *fdt)MachineState *machine =MACHINE (spapr);hwaddr mem_start, node_size;int i, nb_nodes = machine->numa_state->num_nodes; -NodeInfo *nodes = numa_info; +NodeInfo *nodes = machine->numa_state->nodes;NodeInfo ramnode;/* No NUMA nodes, assume there is just one node with whole RAM */
@@ -2539,11 +2539,11 @@ static void spapr_validate_node_memory(MachineState *machine, Error **errp) }for (i =0 ; i < machine->numa_state->num_nodes; i++) { -if (numa_info[i].node_mem %SPAPR_MEMORY_BLOCK_SIZE ) { +if (machine->numa_state->nodes[i].node_mem %SPAPR_MEMORY_BLOCK_SIZE ) {error_setg (errp,"Node %d memory size 0x%" PRIx64" is not aligned to %" PRIu64" MiB" , - i, numa_info[i].node_mem, + i, machine->numa_state->nodes[i].node_mem,SPAPR_MEMORY_BLOCK_SIZE / MiB);return ; }
hw/ppc/spapr_pci.c +3 -1
@@ -1818,6 +1818,7 @@ static void spapr_phb_realize(DeviceState *dev, Error **errp)SysBusDevice *s =SYS_BUS_DEVICE (dev);SpaprPhbState *sphb =SPAPR_PCI_HOST_BRIDGE (s);PCIHostState *phb =PCI_HOST_BRIDGE (s); +MachineState *ms =MACHINE (spapr);char *namebuf;int i;PCIBus *bus;
@@ -1870,7 +1871,8 @@ static void spapr_phb_realize(DeviceState *dev, Error **errp) }if (sphb->numa_node !=-1 && - (sphb->numa_node >=MAX_NODES || !numa_info[sphb->numa_node].present)) { + (sphb->numa_node >=MAX_NODES || + !ms->numa_state->nodes[sphb->numa_node].present)) {error_setg (errp,"Invalid NUMA node ID for PCI host bridge" );return ; }
include/sysemu/numa.h +3 -2
@@ -18,14 +18,15 @@ struct NumaNodeMem {uint64_t node_plugged_mem; }; -extern NodeInfo numa_info[MAX_NODES ]; -struct NumaState {/* Number of NUMA nodes */ int num_nodes;/* Allow setting NUMA distance for different NUMA nodes */ bool have_numa_distance; + +/* NUMA nodes information */ +NodeInfo nodes[MAX_NODES ]; };typedef struct NumaState NumaState ;
Signature · 1 line
2.20.1
PATCH RESEND v8 5/11 numa: Extend CLI to provide initiator information for numa nodes
In reply to Tao XuIn ACPI 6.3 chapter 5.2.27 Heterogeneous Memory Attribute Table (HMAT), The initiator represents processor which access to memory. And in 5.2.27.3 Memory Proximity Domain Attributes Structure, the attached initiator is defined as where the memory controller responsible for a memory proximity domain. With attached initiator information, the topology of heterogeneous memory can be described.
Extend CLI of "-numa node" option to indicate the initiator numa node-id. In the linux kernel, the codes in drivers/acpi/hmat/hmat.c parse and report the platform's HMAT tables.
---
No changes in v8.
--- hw/core/machine.c | 24 ++++++++++++++++++++++++ hw/core/numa.c | 13 +++++++++++++ include/sysemu/numa.h | 3 +++ qapi/machine.json | 6 +++++- qemu-options.hx | 27 +++++++++++++++++++++++---- 5 files changed, 68 insertions(+), 5 deletions(-)
hw/core/machine.c +24 -0
@@ -640,6 +640,7 @@ void machine_set_cpu_numa_node(MachineState *machine, const CpuInstanceProperties *props, Error **errp) { MachineClass *mc = MACHINE_GET_CLASS(machine); +NodeInfo *numa_info = machine->numa_state->nodes;bool match = false;int i;
@@ -709,6 +710,16 @@ void machine_set_cpu_numa_node(MachineState *machine, match = true; slot->props.node_id = props->node_id; slot->props.has_node_id = props->has_node_id; + +if (numa_info[props->node_id].initiator_valid && + (props->node_id != numa_info[props->node_id].initiator)) { +error_setg (errp,"The initiator of CPU NUMA node %" PRId64 +" should be itself." , props->node_id); +return ; + } + numa_info[props->node_id].initiator_valid = true; + numa_info[props->node_id].has_cpu = true; + numa_info[props->node_id].initiator = props->node_id; }if (!match) {
@@ -1050,6 +1061,7 @@ static void machine_numa_finish_cpu_init(MachineState *machine)GString *s =g_string_new (NULL );MachineClass *mc =MACHINE_GET_CLASS (machine);const CPUArchIdList *possible_cpus = mc->possible_cpu_arch_ids (machine); +NodeInfo *numa_info = machine->numa_state->nodes;assert (machine->numa_state->num_nodes);for (i =0 ; i < possible_cpus->len; i++) {
@@ -1083,6 +1095,18 @@ static void machine_numa_finish_cpu_init(MachineState *machine)machine_set_cpu_numa_node (machine, &props, &error_fatal); } } + +for (i =0 ; i < machine->numa_state->num_nodes; i++) { +if (numa_info[i].initiator_valid && + !numa_info[numa_info[i].initiator].has_cpu) { +error_report ("The initiator-id %" PRIu16" of NUMA node %d" +" does not exist." , numa_info[i].initiator, i); +error_printf ("\n" ); + +exit (1 ); + } + } +if (s->len && !qtest_enabled ()) {warn_report ("CPU(s) not present in any NUMA nodes: %s" , s->str);
hw/core/numa.c +13 -0
@@ -128,6 +128,19 @@ static void parse_numa_node(MachineState *ms, NumaNodeOptions *node, numa_info[nodenr].node_mem =object_property_get_uint (o,"size" ,NULL ); numa_info[nodenr].node_memdev =MEMORY_BACKEND (o); } + +if (node->has_initiator) { +if (numa_info[nodenr].initiator_valid && + (node->initiator != numa_info[nodenr].initiator)) { +error_setg (errp,"The initiator of NUMA node %" PRIu16" has been " +"set to node %" PRIu16, nodenr, + numa_info[nodenr].initiator); +return ; + } + + numa_info[nodenr].initiator_valid = true; + numa_info[nodenr].initiator = node->initiator; + } numa_info[nodenr].present = true; max_numa_nodeid =MAX (max_numa_nodeid, nodenr +1 ); ms->numa_state->num_nodes++;
include/sysemu/numa.h +3 -0
@@ -10,6 +10,9 @@ struct NodeInfo {uint64_t node_mem;struct HostMemoryBackend *node_memdev;bool present; +bool has_cpu; +bool initiator_valid; +uint16_t initiator;uint8_t distance[MAX_NODES ]; };
qapi/machine.json +5 -1
@@ -414,6 +414,9 @@ # @memdev: memory backend object. If specified for one node, # it must be specified for all nodes. # +# @initiator: the initiator numa nodeid that is closest (as in directly +# attached) to this numa node (since 4.2) +# # Since: 2.1 ## { 'struct': 'NumaNodeOptions',
@@ -421,7 +424,8 @@ '*nodeid': 'uint16', '*cpus': ['uint16'], '*mem': 'size', - '*memdev': 'str' }} + '*memdev': 'str', + '*initiator': 'uint16' }} ## # @NumaDistOptions:
qemu-options.hx +23 -4
@@ -161,14 +161,14 @@ If any on the three values is given, the total number of CPUs @var{n} can be omi ETEXI DEF("numa", HAS_ARG, QEMU_OPTION_numa, - "-numa node[,mem=size][,cpus=firstcpu[-lastcpu]][,nodeid=node]\n" - "-numa node[,memdev=id][,cpus=firstcpu[-lastcpu]][,nodeid=node]\n" + "-numa node[,mem=size][,cpus=firstcpu[-lastcpu]][,nodeid=node][,initiator=node]\n" + "-numa node[,memdev=id][,cpus=firstcpu[-lastcpu]][,nodeid=node][,initiator=node]\n" "-numa dist,src=source,dst=destination,val=distance\n" "-numa cpu,node-id=node[,socket-id=x][,core-id=y][,thread-id=z]\n", QEMU_ARCH_ALL) STEXI -@item -numa node[,mem=@var{size}][,cpus=@var{firstcpu}[-@var{lastcpu}]][,nodeid=@var{node}] -@itemx -numa node[,memdev=@var{id}][,cpus=@var{firstcpu}[-@var{lastcpu}]][,nodeid=@var{node}] +@item -numa node[,mem=@var{size}][,cpus=@var{firstcpu}[-@var{lastcpu}]][,nodeid=@var{node}][,initiator=@var{initiator}] +@itemx -numa node[,memdev=@var{id}][,cpus=@var{firstcpu}[-@var{lastcpu}]][,nodeid=@var{node}][,initiator=@var{initiator}] @itemx -numa dist,src=@var{source},dst=@var{destination},val=@var{distance} @itemx -numa cpu,node-id=@var{node}[,socket-id=@var{x}][,core-id=@var{y}][,thread-id=@var{z}] @findex -numa
@@ -215,6 +215,25 @@ split equally between them. @samp{mem} and @samp{memdev} are mutually exclusive. Furthermore, if one node uses @samp{memdev}, all of them have to use it. +@samp{initiator} indicate the initiator NUMA @var{initiator} that is +closest (as in directly attached) to this NUMA @var{node}. + +For example, the following option assigns 2 NUMA nodes, node 0 has CPU. +node 1 has only memory, and its' initiator is node 0. Note that because +node 0 has CPU, by default the initiator of node 0 is itself and must be +itself. +@example +-M pc \ +-m 2G,slots=2,maxmem=4G \ +-object memory-backend-ram,size=1G,id=m0 \ +-object memory-backend-ram,size=1G,id=m1 \ +-numa node,nodeid=0,memdev=m0 \ +-numa node,nodeid=1,memdev=m1,initiator=0 \ +-smp 2,sockets=2,maxcpus=2 \ +-numa cpu,node-id=0,socket-id=0 \ +-numa cpu,node-id=0,socket-id=1 \ +@end example + @var{source} and @var{destination} are NUMA node IDs. @var{distance} is the NUMA distance from @var{source} to @var{destination}. The distance from a node to itself is always 10. If any pair of nodes is
Signature · 1 line
2.20.1
PATCH RESEND v8 6/11 hmat acpi: Build Memory Proximity Domain Attributes Structure(s)
In reply to Tao XuFrom: Liu Jingqi <[email protected]>
HMAT is defined in ACPI 6.3: 5.2.27 Heterogeneous Memory Attribute Table (HMAT). The specification references below link:
http://www.uefi.org/sites/default/files/resources/ACPI_6_3_final_Jan30.pdf
It describes the memory attributes, such as memory side cache attributes and bandwidth and latency details, related to the Memory Proximity Domain. The software is
expected to use this information as hint for optimization.
This structure describes Memory Proximity Domain Attributes by memory subsystem and its associativity with processor proximity domain as well as hint for memory usage.
In the linux kernel, the codes in drivers/acpi/hmat/hmat.c parse and report the platform's HMAT tables.
---
No changes in v8.
--- hw/acpi/Kconfig | 5 +++ hw/acpi/Makefile.objs | 1 + hw/acpi/hmat.c | 101 ++++++++++++++++++++++++++++++++++++++++++ hw/acpi/hmat.h | 45 +++++++++++++++++++ hw/i386/acpi-build.c | 3 ++ 5 files changed, 155 insertions(+) create mode 100644 hw/acpi/hmat.c create mode 100644 hw/acpi/hmat.h
hw/acpi/Kconfig +5 -0
@@ -7,6 +7,7 @@ config ACPI_X86 select ACPI_NVDIMM select ACPI_CPU_HOTPLUG select ACPI_MEMORY_HOTPLUG + select ACPI_HMAT config ACPI_X86_ICH bool
@@ -31,3 +32,7 @@ config ACPI_VMGENID bool default y depends on PC + +config ACPI_HMAT + bool + depends on ACPI
hw/acpi/Makefile.objs +1 -0
@@ -6,6 +6,7 @@ common-obj-$(CONFIG_ACPI_MEMORY_HOTPLUG) += memory_hotplug.o common-obj-$(CONFIG_ACPI_CPU_HOTPLUG) += cpu.o common-obj-$(CONFIG_ACPI_NVDIMM) += nvdimm.o common-obj-$(CONFIG_ACPI_VMGENID) += vmgenid.o +common-obj-$(CONFIG_ACPI_HMAT) += hmat.o common-obj-$(call lnot,$(CONFIG_ACPI_X86)) += acpi-stub.o common-obj-y += acpi_interface.o
hw/acpi/hmat.c new file +101 -0
101 lines not on this page · raw message
hw/acpi/hmat.h new file +45 -0
45 lines not on this page · raw message
hw/i386/acpi-build.c +3 -0
@@ -66,6 +66,7 @@#include "hw/i386/intel_iommu.h" #include "hw/acpi/ipmi.h" +#include "hw/acpi/hmat.h" /* These are used to size the ACPI tables for -M pc-i440fx-1.7 and * -M pc-i440fx-2.0. Even if the actual amount of AML generated grows
@@ -2696,6 +2697,8 @@ void acpi_build(AcpiBuildTables *tables, MachineState *machine)acpi_add_table (table_offsets, tables_blob);build_slit (tables_blob, tables->linker, machine); } +acpi_add_table (table_offsets, tables_blob); +build_hmat (tables_blob, tables->linker, machine->numa_state); }if (acpi_get_mcfg (&mcfg)) {acpi_add_table (table_offsets, tables_blob);
Signature · 1 line
2.20.1
PATCH RESEND v8 7/11 hmat acpi: Build System Locality Latency and Bandwidth Information Structure(s)
In reply to Tao XuFrom: Liu Jingqi <[email protected]>
This structure describes the memory access latency and bandwidth information from various memory access initiator proximity domains. The latency and bandwidth numbers represented in this structure correspond to rated latency and bandwidth for the platform. The software could use this information as hint for optimization.
---
No changes in v8.
--- hw/acpi/hmat.c | 95 ++++++++++++++++++++++++++++++++++++++++- hw/acpi/hmat.h | 41 ++++++++++++++++++ include/qemu/typedefs.h | 1 + include/sysemu/numa.h | 3 ++ include/sysemu/sysemu.h | 21 +++++++++ 5 files changed, 160 insertions(+), 1 deletion(-)
hw/acpi/hmat.c +94 -1
@@ -67,11 +67,81 @@ static void build_hmat_mpda(GArray *table_data, uint16_t flags, int initiator,build_append_int_noprefix (table_data,0 ,8 ); } +/* +* ACPI 6.3: 5.2.27.4 System Locality Latency and Bandwidth Information +* Structure: Table 5-142 +*/ +static void build_hmat_lb (GArray *table_data,HMAT_LB_Info *hmat_lb, +uint32_t num_initiator,uint32_t num_target, +uint32_t *initiator_pxm,int type) +{ +uint32_t s = num_initiator; +uint32_t t = num_target; +uint8_t m, n; +uint8_t mask =0x0f ; +int i; + +/* Type */ +build_append_int_noprefix (table_data,1 ,2 ); +/* Reserved */ +build_append_int_noprefix (table_data,0 ,2 ); +/* Length */ +build_append_int_noprefix (table_data,32 +4 * s +4 * t +2 * s * t,4 ); +/* Flags: Bits [3:0] Memory Hierarchy, Bits[7:4] Reserved */ +build_append_int_noprefix (table_data, hmat_lb->hierarchy & mask,1 ); +/* Data Type */ +build_append_int_noprefix (table_data, hmat_lb->data_type,1 ); +/* Reserved */ +build_append_int_noprefix (table_data,0 ,2 ); +/* Number of Initiator Proximity Domains (s) */ +build_append_int_noprefix (table_data, s,4 ); +/* Number of Target Proximity Domains (t) */ +build_append_int_noprefix (table_data, t,4 ); +/* Reserved */ +build_append_int_noprefix (table_data,0 ,4 ); + +/* Entry Base Unit */ +if (HMAT_IS_LATENCY (type)) { +build_append_int_noprefix (table_data, hmat_lb->base_lat,8 ); + }else { +build_append_int_noprefix (table_data, hmat_lb->base_bw,8 ); + } + +/* Initiator Proximity Domain List */ +for (i =0 ; i < s; i++) { +build_append_int_noprefix (table_data, initiator_pxm[i],4 ); + } + +/* Target Proximity Domain List */ +for (i =0 ; i < t; i++) { +build_append_int_noprefix (table_data, i,4 ); + } + +/* Latency or Bandwidth Entries */ +for (i =0 ; i < s; i++) { + m = initiator_pxm[i]; +for (n =0 ; n < t; n++) { +uint16_t entry; + +if (HMAT_IS_LATENCY (type)) { + entry = hmat_lb->latency[m][n]; + }else { + entry = hmat_lb->bandwidth[m][n]; + } + +build_append_int_noprefix (table_data, entry,2 ); + } + } +} +/* Build HMAT sub table structures */ static void hmat_build_table_structs (GArray *table_data,NumaState *nstat) {uint16_t flags; -int i; +uint32_t num_initiator =0 ; +uint32_t initiator_pxm[MAX_NODES ]; +int i, hrchy, type; +HMAT_LB_Info *numa_hmat_lb;for (i =0 ; i < nstat->num_nodes; i++) { flags =0 ;
@@ -82,6 +152,29 @@ static void hmat_build_table_structs(GArray *table_data, NumaState *nstat)build_hmat_mpda (table_data, flags, nstat->nodes[i].initiator, i); } + +for (i =0 ; i < nstat->num_nodes; i++) { +if (nstat->nodes[i].has_cpu) { + initiator_pxm[num_initiator++] = i; + } + } + +/* +* ACPI 6.3: 5.2.27.4 System Locality Latency and Bandwidth Information +* Structure: Table 5-142 +*/ +for (hrchy =HMAT_LB_MEM_MEMORY ; + hrchy <=HMAT_LB_MEM_CACHE_3RD_LEVEL ; hrchy++) { +for (type =HMAT_LB_DATA_ACCESS_LATENCY ; + type <=HMAT_LB_DATA_WRITE_BANDWIDTH ; type++) { + numa_hmat_lb = nstat->hmat_lb[hrchy][type]; + +if (numa_hmat_lb) { +build_hmat_lb (table_data, numa_hmat_lb, num_initiator, + nstat->num_nodes, initiator_pxm, type); + } + } + } }void build_hmat (GArray *table_data,BIOSLinker *linker,NumaState *nstat)
hw/acpi/hmat.h +41 -0
47 lines not on this page · raw message
include/qemu/typedefs.h +1 -0
@@ -33,6 +33,7 @@ typedef struct FWCfgEntry FWCfgEntry;typedef struct FWCfgIoState FWCfgIoState ;typedef struct FWCfgMemState FWCfgMemState ;typedef struct FWCfgState FWCfgState ; +typedef struct HMAT_LB_Info HMAT_LB_Info ;typedef struct HVFX86EmulatorState HVFX86EmulatorState ;typedef struct I2CBus I2CBus ;typedef struct I2SCodec I2SCodec ;
include/sysemu/numa.h +3 -0
@@ -30,6 +30,9 @@ struct NumaState {/* NUMA nodes information */ NodeInfo nodes[MAX_NODES ]; + +/* NUMA modes HMAT Locality Latency and Bandwidth Information */ +HMAT_LB_Info *hmat_lb[HMAT_LB_LEVELS ][HMAT_LB_TYPES ]; };typedef struct NumaState NumaState ;
include/sysemu/sysemu.h +21 -0
@@ -126,6 +126,27 @@ extern int mem_prealloc;#define NUMA_DISTANCE_MAX 254#define NUMA_DISTANCE_UNREACHABLE 255 +/* the value of AcpiHmatLBInfo flags */ +enum { +HMAT_LB_MEM_MEMORY =0 , +HMAT_LB_MEM_CACHE_1ST_LEVEL =1 , +HMAT_LB_MEM_CACHE_2ND_LEVEL =2 , +HMAT_LB_MEM_CACHE_3RD_LEVEL =3 , +}; + +/* the value of AcpiHmatLBInfo data type */ +enum { +HMAT_LB_DATA_ACCESS_LATENCY =0 , +HMAT_LB_DATA_READ_LATENCY =1 , +HMAT_LB_DATA_WRITE_LATENCY =2 , +HMAT_LB_DATA_ACCESS_BANDWIDTH =3 , +HMAT_LB_DATA_READ_BANDWIDTH =4 , +HMAT_LB_DATA_WRITE_BANDWIDTH =5 , +}; + +#define HMAT_LB_LEVELS (HMAT_LB_MEM_CACHE_3RD_LEVEL + 1) +#define HMAT_LB_TYPES (HMAT_LB_DATA_WRITE_BANDWIDTH + 1) +#define MAX_OPTION_ROMS 16 typedef struct QEMUOptionRom { const char *name;
Signature · 1 line
2.20.1
PATCH RESEND v8 8/11 hmat acpi: Build Memory Side Cache Information Structure(s)
In reply to Tao XuFrom: Liu Jingqi <[email protected]>
This structure describes memory side cache information for memory proximity domains if the memory side cache is present and the physical device forms the memory side cache.
The software could use this information to effectively place the data in memory to maximize the performance of the system memory that use the memory side cache.
---
No changes in v8.
--- hw/acpi/hmat.c | 64 ++++++++++++++++++++++++++++++++++++++++- hw/acpi/hmat.h | 17 +++++++++++ include/qemu/typedefs.h | 1 + include/sysemu/numa.h | 3 ++ include/sysemu/sysemu.h | 2 ++ 5 files changed, 86 insertions(+), 1 deletion(-)
hw/acpi/hmat.c +63 -1
@@ -134,14 +134,63 @@ static void build_hmat_lb(GArray *table_data, HMAT_LB_Info *hmat_lb, } } +/* ACPI 6.3: 5.2.27.5 Memory Side Cache Information Structure: Table 5-143 */ +static void build_hmat_cache (GArray *table_data,HMAT_Cache_Info *hmat_cache) +{ +/* +* Cache Attributes: Bits [3:0] – Total Cache Levels +* for this Memory Proximity Domain +*/ +uint32_t cache_attr = hmat_cache->total_levels &0xF ; + +/* Bits [7:4] : Cache Level described in this structure */ + cache_attr |= (hmat_cache->level &0xF ) <<4 ; + +/* Bits [11:8] - Cache Associativity */ + cache_attr |= (hmat_cache->associativity &0xF ) <<8 ; + +/* Bits [15:12] - Write Policy */ + cache_attr |= (hmat_cache->write_policy &0xF ) <<12 ; + +/* Bits [31:16] - Cache Line size in bytes */ + cache_attr |= (hmat_cache->line_size &0xFFFF ) <<16 ; + + cache_attr =cpu_to_le32 (cache_attr); + +/* Type */ +build_append_int_noprefix (table_data,2 ,2 ); +/* Reserved */ +build_append_int_noprefix (table_data,0 ,2 ); +/* Length */ +build_append_int_noprefix (table_data,32 ,4 ); +/* Proximity Domain for the Memory */ +build_append_int_noprefix (table_data, hmat_cache->mem_proximity,4 ); +/* Reserved */ +build_append_int_noprefix (table_data,0 ,4 ); +/* Memory Side Cache Size */ +build_append_int_noprefix (table_data, hmat_cache->size,8 ); +/* Cache Attributes */ +build_append_int_noprefix (table_data, cache_attr,4 ); +/* Reserved */ +build_append_int_noprefix (table_data,0 ,2 ); +/* +* Number of SMBIOS handles (n) +* Linux kernel uses Memory Side Cache Information Structure +* without SMBIOS entries for now, so set Number of SMBIOS handles +* as 0. +*/ +build_append_int_noprefix (table_data,0 ,2 ); +} +/* Build HMAT sub table structures */ static void hmat_build_table_structs (GArray *table_data,NumaState *nstat) {uint16_t flags;uint32_t num_initiator =0 ;uint32_t initiator_pxm[MAX_NODES ]; -int i, hrchy, type; +int i, hrchy, type, level;HMAT_LB_Info *numa_hmat_lb; +HMAT_Cache_Info *numa_hmat_cache;for (i =0 ; i < nstat->num_nodes; i++) { flags =0 ;
@@ -175,6 +224,19 @@ static void hmat_build_table_structs(GArray *table_data, NumaState *nstat) } } } + +/* +* ACPI 6.3: 5.2.27.5 Memory Side Cache Information Structure: +* Table 5-143 +*/ +for (i =0 ; i < nstat->num_nodes; i++) { +for (level =0 ; level <=MAX_HMAT_CACHE_LEVEL ; level++) { + numa_hmat_cache = nstat->hmat_cache[i][level]; +if (numa_hmat_cache) { +build_hmat_cache (table_data, numa_hmat_cache); + } + } + } }void build_hmat (GArray *table_data,BIOSLinker *linker,NumaState *nstat)
hw/acpi/hmat.h +17 -0
@@ -81,6 +81,23 @@ struct HMAT_LB_Info { uint16_t bandwidth[MAX_NODES][MAX_NODES]; }; +struct HMAT_Cache_Info { +/* The memory proximity domain to which the memory belongs. */ +uint32_t mem_proximity; +/* Size of memory side cache in bytes. */ +uint64_t size; +/* Total cache levels for this memory proximity domain. */ +uint8_t total_levels; +/* Cache level described in this structure. */ +uint8_t level; +/* Cache Associativity: None/Direct Mapped/Comple Cache Indexing */ +uint8_t associativity; +/* Write Policy: None/Write Back(WB)/Write Through(WT) */ +uint8_t write_policy; +/* Cache Line size in bytes. */ +uint16_t line_size; +}; +void build_hmat (GArray *table_data,BIOSLinker *linker,NumaState *nstat);#endif
include/qemu/typedefs.h +1 -0
@@ -33,6 +33,7 @@ typedef struct FWCfgEntry FWCfgEntry;typedef struct FWCfgIoState FWCfgIoState ;typedef struct FWCfgMemState FWCfgMemState ;typedef struct FWCfgState FWCfgState ; +typedef struct HMAT_Cache_Info HMAT_Cache_Info ;typedef struct HMAT_LB_Info HMAT_LB_Info ;typedef struct HVFX86EmulatorState HVFX86EmulatorState ;typedef struct I2CBus I2CBus ;
include/sysemu/numa.h +3 -0
@@ -33,6 +33,9 @@ struct NumaState {/* NUMA modes HMAT Locality Latency and Bandwidth Information */ HMAT_LB_Info *hmat_lb[HMAT_LB_LEVELS ][HMAT_LB_TYPES ]; + +/* Memory Side Cache Information Structure */ +HMAT_Cache_Info *hmat_cache[MAX_NODES ][MAX_HMAT_CACHE_LEVEL +1 ]; };typedef struct NumaState NumaState ;
include/sysemu/sysemu.h +2 -0
@@ -144,6 +144,8 @@ enum { HMAT_LB_DATA_WRITE_BANDWIDTH = 5, }; +#define MAX_HMAT_CACHE_LEVEL 3 +#define HMAT_LB_LEVELS (HMAT_LB_MEM_CACHE_3RD_LEVEL + 1)#define HMAT_LB_TYPES (HMAT_LB_DATA_WRITE_BANDWIDTH + 1)
Signature · 1 line
2.20.1
PATCH RESEND v8 9/11 numa: Extend the CLI to provide memory latency and bandwidth information
In reply to Tao XuFrom: Liu Jingqi <[email protected]>
Add -numa hmat-lb option to provide System Locality Latency and Bandwidth Information. These memory attributes help to build System Locality Latency and Bandwidth Information Structure(s) in ACPI Heterogeneous Memory Attribute Table (HMAT).
---
No changes in v8.
--- hw/core/numa.c | 127 ++++++++++++++++++++++++++++++++++++++++++ include/sysemu/numa.h | 2 + qapi/machine.json | 100 ++++++++++++++++++++++++++++++++- qemu-options.hx | 45 ++++++++++++++- 4 files changed, 271 insertions(+), 3 deletions(-)
hw/core/numa.c +127 -0
@@ -37,6 +37,7 @@#include "qemu/option.h" #include "qemu/config-file.h" #include "qemu/cutils.h" +#include "hw/acpi/hmat.h" QemuOptsList qemu_numa_opts = { .name ="numa" ,
@@ -183,6 +184,126 @@ void parse_numa_distance(MachineState *ms, NumaDistOptions *dist, Error **errp) ms->numa_state->have_numa_distance = true; } +void parse_numa_hmat_lb (MachineState *ms,NumaHmatLBOptions *node, +Error **errp) +{ +int nb_numa_nodes = ms->numa_state->num_nodes; +NodeInfo *numa_info = ms->numa_state->nodes; +HMAT_LB_Info *hmat_lb =NULL ; + +if (node->data_type <=HMATLB_DATA_TYPE_WRITE_LATENCY ) { +if (!node->has_latency) { +error_setg (errp,"Missing 'latency' option." ); +return ; + } +if (node->has_bandwidth) { +error_setg (errp,"Invalid option 'bandwidth' since " +"the data type is latency." ); +return ; + } +if (node->has_base_bw) { +error_setg (errp,"Invalid option 'base_bw' since " +"the data type is latency." ); +return ; + } + } + +if (node->data_type >=HMATLB_DATA_TYPE_ACCESS_BANDWIDTH ) { +if (!node->has_bandwidth) { +error_setg (errp,"Missing 'bandwidth' option." ); +return ; + } +if (node->has_latency) { +error_setg (errp,"Invalid option 'latency' since " +"the data type is bandwidth." ); +return ; + } +if (node->has_base_lat) { +error_setg (errp,"Invalid option 'base_lat' since " +"the data type is bandwidth." ); +return ; + } + } + +if (node->initiator >= nb_numa_nodes) { +error_setg (errp,"Invalid initiator=%" + PRIu16", it should be less than %d." , + node->initiator, nb_numa_nodes); +return ; + } +if (!numa_info[node->initiator].has_cpu) { +error_setg (errp,"Invalid initiator=%" + PRIu16", it isn't an initiator proximity domain." , + node->initiator); +return ; + } + +if (node->target >= nb_numa_nodes) { +error_setg (errp,"Invalid target=%" + PRIu16", it should be less than %d." , + node->target, nb_numa_nodes); +return ; + } +if (!numa_info[node->target].initiator_valid) { +error_setg (errp,"Invalid target=%" + PRIu16", it hasn't a valid initiator proximity domain." , + node->target); +return ; + } + +if (node->has_latency) { + hmat_lb = ms->numa_state->hmat_lb[node->hierarchy][node->data_type]; + +if (!hmat_lb) { + hmat_lb =g_malloc0 (sizeof (*hmat_lb)); + ms->numa_state->hmat_lb[node->hierarchy][node->data_type] = hmat_lb; + }else if (hmat_lb->latency[node->initiator][node->target]) { +error_setg (errp,"Duplicate configuration of the latency for " +"initiator=%" PRIu16" and target=%" PRIu16"." , + node->initiator, node->target); +return ; + } + +/* Only the first time of setting the base unit is valid. */ +if ((hmat_lb->base_lat ==0 ) && (node->has_base_lat)) { + hmat_lb->base_lat = node->base_lat; + } + + hmat_lb->latency[node->initiator][node->target] = node->latency; + } + +if (node->has_bandwidth) { + hmat_lb = ms->numa_state->hmat_lb[node->hierarchy][node->data_type]; + +if (!hmat_lb) { + hmat_lb =g_malloc0 (sizeof (*hmat_lb)); + ms->numa_state->hmat_lb[node->hierarchy][node->data_type] = hmat_lb; + }else if (hmat_lb->bandwidth[node->initiator][node->target]) { +error_setg (errp,"Duplicate configuration of the bandwidth for " +"initiator=%" PRIu16" and target=%" PRIu16"." , + node->initiator, node->target); +return ; + } + +/* Only the first time of setting the base unit is valid. */ +if (hmat_lb->base_bw ==0 ) { +if (!node->has_base_bw) { +error_setg (errp,"Missing 'base-bw' option" ); +return ; + }else { + hmat_lb->base_bw = node->base_bw; + } + } + + hmat_lb->bandwidth[node->initiator][node->target] = node->bandwidth; + } + +if (hmat_lb) { + hmat_lb->hierarchy = node->hierarchy; + hmat_lb->data_type = node->data_type; + } +} +void set_numa_options (MachineState *ms,NumaOptions *object,Error **errp) {Error *err =NULL ;
@@ -221,6 +342,12 @@ void set_numa_options(MachineState *ms, NumaOptions *object, Error **errp)machine_set_cpu_numa_node (ms,qapi_NumaCpuOptions_base (&object->u.cpu), &err);break ; +case NUMA_OPTIONS_TYPE_HMAT_LB : +parse_numa_hmat_lb (ms, &object->u.hmat_lb, &err); +if (err) { + goto end; + } +break ;default :abort (); }
include/sysemu/numa.h +2 -0
@@ -41,6 +41,8 @@ typedef struct NumaState NumaState;void set_numa_options (MachineState *ms,NumaOptions *object,Error **errp);void parse_numa_opts (MachineState *ms); +void parse_numa_hmat_lb (MachineState *ms,NumaHmatLBOptions *node, +Error **errp);void numa_complete_configuration (MachineState *ms);void query_numa_node_mem (NumaNodeMem node_mem[],MachineState *ms);extern QemuOptsList qemu_numa_opts;
qapi/machine.json +98 -2
121 lines not on this page · raw message
qemu-options.hx +44 -1
66 lines not on this page · raw message
Signature · 1 line
2.20.1
Re: [Qemu-devel] [PATCH RESEND v8 09/11] numa: Extend the CLI to provide memory latency and bandwidth information
Liu Jingqi, Tao Xu,
Apologies to the late response on a patch on what is already a v8 patch.
The specification of latency and bandwidth is very much following the ACPI specification.
For a qemu interface I think this should be in more human measurements (time for latency and a bandwidth rate for the bandwidth).
e.g rather than
-object memory-backend-ram,size=64M,id=m0
-object memory-backend-ram,size=64M,id=m1geosync
-numa node,nodeid=0,memdev=m0
-numa node,nodeid=1,memdev=m1geosync,initiator=0
-numa cpu,node-id=0,socket-id=0
-numa cpu,node-id=0,socket-id=1
-numa
hmat-lb,initiator=0,target=0,hierarchy=memory,data-type=access-latency,base-lat=1000,latency=5
-numa
hmat-lb,initiator=0,target=0,hierarchy=memory,data-type=access-bandwidth,base-bw=20,bandwidth=5
-numa
hmat-lb,initiator=0,target=1,hierarchy=memory,data-type=access-latency,base-lat=100,latency=10
-numa hmat-lb,initiator=0,target=1,hierarchy=memory,data-type=access-bandwidth,base-bw=20,bandwidth=10
Suggest a form like:
-numa
hmat-lb,initiator=0,target=0,hierarchy=memory,data-type=access-latency,latency=NUM[fpnm[s]]
-numa
hmat-lb,initiator=0,target=0,hierarchy=memory,data-type=access-bandwidth,bandwidth=NUM[KMGP][Bb[ps]]
So:
-numa
hmat-lb,initiator=0,target=0,hierarchy=memory,data-type=access-latency,latency=5ns
-numa
hmat-lb,initiator=0,target=0,hierarchy=memory,data-type=access-bandwidth,bandwidth=5Gb
So this would remove the base-[lt,bw] settings and compute those internally in qemu based on latency/bandwidth specified with real units.
Also note the linux kernel HMAT latency display doesn't match up with the parameters passed in this patch series. Not sure which is at fault.
Test and results:
x86_64-softmmu/qemu-system-x86_64 -machine pc -nographic -smp
2,sockets=2 -m 128M,slots=2,maxmem=1G
-kernel /home/dan/repos/linux/vmlinux -append "console=ttyS0"
-object memory-backend-ram,size=64M,id=m0 -object memory-backend-ram,size=64M,id=m1geosync -numa node,nodeid=0,memdev=m0
-numa node,nodeid=1,memdev=m1geosync,initiator=0 -numa
cpu,node-id=0,socket-id=0 -numa cpu,node-id=0,socket-id=1 -numa hmat-lb,initiator=0,target=0,hierarchy=memory,data-type=access-latency,base-lat=1000,latency=5 -numa hmat-lb,initiator=0,target=0,hierarchy=memory,data-type=access-bandwidth,base-bw=20,bandwidth=5 -numa hmat-lb,initiator=0,target=1,hierarchy=memory,data-type=access-latency,base-lat=100,latency=10 -numa hmat-lb,initiator=0,target=1,hierarchy=memory,data-type=access-bandwidth,base-bw=20,bandwidth=10
The Booting from ROM..[ 0.000000] Linux version 5.3.0-rc2+
(dan@volution) (gcc version 9.1.1 20190503 (Red Hat 9.1.1-1) (GCC)) #21 SMP Tue Aug 6 17:15:49 AEST 2019
[ 0.419303] HMAT: Memory Flags:0001 Processor Domain:0 Memory Domain:0 [ 0.419648] HMAT: Memory Flags:0001 Processor Domain:0 Memory Domain:1 [ 0.419956] HMAT: Locality: Flags:00 Type:Access Latency Initiator Domains:1 Target Domains:2 Base:1000 [ 0.420527] Initiator-Target[0-0]:5 nsec [ 0.420791] Initiator-Target[0-1]:10 nsec [ 0.421068] HMAT: Locality: Flags:00 Type:Access Bandwidth Initiator Domains:1 Target Domains:2 Base:20 [ 0.421447] Initiator-Target[0-0]:100 MB/s [ 0.421635] Initiator-Target[0-1]:200 MB/s
Re: [Qemu-devel] [PATCH RESEND v8 09/11] numa: Extend the CLI to provide memory latency and bandwidth information
Quoted 69 lines · Daniel Black
Liu Jingqi, Tao Xu,
Apologies to the late response on a patch on what is already a v8 patch.
The specification of latency and bandwidth is very much following the ACPI specification.
For a qemu interface I think this should be in more human measurements (time for latency and a bandwidth rate for the bandwidth).
e.g rather than
-object memory-backend-ram,size=64M,id=m0
-object memory-backend-ram,size=64M,id=m1geosync
-numa node,nodeid=0,memdev=m0
-numa node,nodeid=1,memdev=m1geosync,initiator=0
-numa cpu,node-id=0,socket-id=0
-numa cpu,node-id=0,socket-id=1
-numa
hmat-lb,initiator=0,target=0,hierarchy=memory,data-type=access-latency,base-lat=1000,latency=5
-numa
hmat-lb,initiator=0,target=0,hierarchy=memory,data-type=access-bandwidth,base-bw=20,bandwidth=5
-numa
hmat-lb,initiator=0,target=1,hierarchy=memory,data-type=access-latency,base-lat=100,latency=10
-numa hmat-lb,initiator=0,target=1,hierarchy=memory,data-type=access-bandwidth,base-bw=20,bandwidth=10Suggest a form like:
-numa
hmat-lb,initiator=0,target=0,hierarchy=memory,data-type=access-latency,latency=NUM[fpnm[s]]
-numa
hmat-lb,initiator=0,target=0,hierarchy=memory,data-type=access-bandwidth,bandwidth=NUM[KMGP][Bb[ps]]So:
-numa
hmat-lb,initiator=0,target=0,hierarchy=memory,data-type=access-latency,latency=5ns
-numa
hmat-lb,initiator=0,target=0,hierarchy=memory,data-type=access-bandwidth,bandwidth=5GbSo this would remove the base-[lt,bw] settings and compute those internally in qemu based on latency/bandwidth specified with real units.
Also note the linux kernel HMAT latency display doesn't match up with the parameters passed in this patch series. Not sure which is at fault.
Test and results:
x86_64-softmmu/qemu-system-x86_64 -machine pc -nographic -smp
2,sockets=2 -m 128M,slots=2,maxmem=1G(quoted diff) +0
-2-kernel /home/dan/repos/linux/vmlinux -append "console=ttyS0" -object memory-backend-ram,size=64M,id=m0 -objectmemory-backend-ram,size=64M,id=m1geosync -numa node,nodeid=0,memdev=m0
-numa node,nodeid=1,memdev=m1geosync,initiator=0 -numa
cpu,node-id=0,socket-id=0 -numa cpu,node-id=0,socket-id=1 -numa hmat-lb,initiator=0,target=0,hierarchy=memory,data-type=access-latency,base-lat=1000,latency=5 -numa hmat-lb,initiator=0,target=0,hierarchy=memory,data-type=access-bandwidth,base-bw=20,bandwidth=5 -numa hmat-lb,initiator=0,target=1,hierarchy=memory,data-type=access-latency,base-lat=100,latency=10 -numa hmat-lb,initiator=0,target=1,hierarchy=memory,data-type=access-bandwidth,base-bw=20,bandwidth=10The Booting from ROM..[ 0.000000] Linux version 5.3.0-rc2+
(dan@volution) (gcc version 9.1.1 20190503 (Red Hat 9.1.1-1) (GCC)) #21 SMP Tue Aug 6 17:15:49 AEST 2019
Quoted 10 lines
[ 0.419303] HMAT: Memory Flags:0001 Processor Domain:0 Memory Domain:0 [ 0.419648] HMAT: Memory Flags:0001 Processor Domain:0 Memory Domain:1 [ 0.419956] HMAT: Locality: Flags:00 Type:Access Latency Initiator Domains:1 Target Domains:2 Base:1000 [ 0.420527] Initiator-Target[0-0]:5 nsec [ 0.420791] Initiator-Target[0-1]:10 nsec [ 0.421068] HMAT: Locality: Flags:00 Type:Access Bandwidth Initiator Domains:1 Target Domains:2 Base:20 [ 0.421447] Initiator-Target[0-0]:100 MB/s [ 0.421635] Initiator-Target[0-1]:200 MB/s
This is because the base-lat is only first set is valid, so if we input different base-lat like the test case, we follow the first 1000, so result is 5000 ps = 5 ns. but your suggestion is reasonable, this is not user-friendly. So we will refer to your suggestions. Thank you!
PATCH RESEND v8 10/11 numa: Extend the CLI to provide memory side cache information
In reply to Tao XuFrom: Liu Jingqi <[email protected]>
Add -numa hmat-cache option to provide Memory Side Cache Information. These memory attributes help to build Memory Side Cache Information Structure(s) in ACPI Heterogeneous Memory Attribute Table (HMAT).
---
No changes in v8.
--- hw/core/numa.c | 67 +++++++++++++++++++++++++++++++++++ include/sysemu/numa.h | 2 ++ qapi/machine.json | 81 +++++++++++++++++++++++++++++++++++++++++-- qemu-options.hx | 14 +++++++- 4 files changed, 161 insertions(+), 3 deletions(-)
hw/core/numa.c +67 -0
@@ -304,6 +304,67 @@ void parse_numa_hmat_lb(MachineState *ms, NumaHmatLBOptions *node, } } +void parse_numa_hmat_cache (MachineState *ms,NumaHmatCacheOptions *node, +Error **errp) +{ +int nb_numa_nodes = ms->numa_state->num_nodes; +HMAT_Cache_Info *hmat_cache =NULL ; + +if (node->node_id >= nb_numa_nodes) { +error_setg (errp,"Invalid node-id=%" PRIu32 +", it should be less than %d." , + node->node_id, nb_numa_nodes); +return ; + } + +if (node->total >MAX_HMAT_CACHE_LEVEL ) { +error_setg (errp,"Invalid total=%" PRIu8 +", it should be less than or equal to %d." , + node->total,MAX_HMAT_CACHE_LEVEL ); +return ; + } +if (node->level > node->total) { +error_setg (errp,"Invalid level=%" PRIu8 +", it should be less than or equal to" +" total=%" PRIu8"." , + node->level, node->total); +return ; + } +if (ms->numa_state->hmat_cache[node->node_id][node->level]) { +error_setg (errp,"Duplicate configuration of the side cache for " +"node-id=%" PRIu32" and level=%" PRIu8"." , + node->node_id, node->level); +return ; + } + +if ((node->level >1 ) && + ms->numa_state->hmat_cache[node->node_id][node->level -1 ] && + (node->size >= + ms->numa_state->hmat_cache[node->node_id][node->level -1 ]->size)) { +error_setg (errp,"Invalid size=0x%" PRIx64 +", the size of level=%" PRIu8 +" should be less than the size(0x%" PRIx64 +") of level=%" PRIu8"." , + node->size, node->level, + ms->numa_state->hmat_cache[node->node_id] + [node->level -1 ]->size, + node->level -1 ); +return ; + } + + hmat_cache =g_malloc0 (sizeof (*hmat_cache)); + + hmat_cache->mem_proximity = node->node_id; + hmat_cache->size = node->size; + hmat_cache->total_levels = node->total; + hmat_cache->level = node->level; + hmat_cache->associativity = node->assoc; + hmat_cache->write_policy = node->policy; + hmat_cache->line_size = node->line; + + ms->numa_state->hmat_cache[node->node_id][node->level] = hmat_cache; +} +void set_numa_options (MachineState *ms,NumaOptions *object,Error **errp) {Error *err =NULL ;
@@ -348,6 +409,12 @@ void set_numa_options(MachineState *ms, NumaOptions *object, Error **errp) goto end; }break ; +case NUMA_OPTIONS_TYPE_HMAT_CACHE : +parse_numa_hmat_cache (ms, &object->u.hmat_cache, &err); +if (err) { + goto end; + } +break ;default :abort (); }
include/sysemu/numa.h +2 -0
@@ -43,6 +43,8 @@ void set_numa_options(MachineState *ms, NumaOptions *object, Error **errp);void parse_numa_opts (MachineState *ms);void parse_numa_hmat_lb (MachineState *ms,NumaHmatLBOptions *node,Error **errp); +void parse_numa_hmat_cache (MachineState *ms,NumaHmatCacheOptions *node, +Error **errp);void numa_complete_configuration (MachineState *ms);void query_numa_node_mem (NumaNodeMem node_mem[],MachineState *ms);extern QemuOptsList qemu_numa_opts;
qapi/machine.json +79 -2
102 lines not on this page · raw message
qemu-options.hx +13 -1
@@ -165,7 +165,8 @@ DEF("numa", HAS_ARG, QEMU_OPTION_numa, "-numa node[,memdev=id][,cpus=firstcpu[-lastcpu]][,nodeid=node][,initiator=node]\n" "-numa dist,src=source,dst=destination,val=distance\n" "-numa cpu,node-id=node[,socket-id=x][,core-id=y][,thread-id=z]\n" - "-numa hmat-lb,initiator=node,target=node,hierarchy=memory|first-level|second-level|third-level,data-type=access-latency|read-latency|write-latency[,base-lat=blat][,base-bw=bbw][,latency=lat][,bandwidth=bw]\n", + "-numa hmat-lb,initiator=node,target=node,hierarchy=memory|first-level|second-level|third-level,data-type=access-latency|read-latency|write-latency[,base-lat=blat][,base-bw=bbw][,latency=lat][,bandwidth=bw]\n" + "-numa hmat-cache,node-id=node,size=size,total=total,level=level[,assoc=none|direct|complex][,policy=none|write-back|write-through][,line=size]\n", QEMU_ARCH_ALL) STEXI @item -numa node[,mem=@var{size}][,cpus=@var{firstcpu}[-@var{lastcpu}]][,nodeid=@var{node}][,initiator=@var{initiator}]
@@ -173,6 +174,7 @@ STEXI @itemx -numa dist,src=@var{source},dst=@var{destination},val=@var{distance} @itemx -numa cpu,node-id=@var{node}[,socket-id=@var{x}][,core-id=@var{y}][,thread-id=@var{z}] @itemx -numa hmat-lb,initiator=@var{node},target=@var{node},hierarchy=@var{str},data-type=@var{str}[,base-lat=@var{blat}][,base-bw=@var{bbw}][,latency=@var{lat}][,bandwidth=@var{bw}] +@itemx -numa hmat-cache,node-id=@var{node},size=@var{size},total=@var{total},level=@var{level}[,assoc=@var{str}][,policy=@var{str}][,line=@var{size}] @findex -numa Define a NUMA node and assign RAM and VCPUs to it. Set the NUMA distance from a source node to a destination node.
@@ -275,11 +277,19 @@ Note: Due to the minimum matrix value entry value being 10, the base unit corres to a value of 10. And @var{blat} or @var{bbw} should be an integer. @var{lat} or @var{bw} is the latency/bandwidth value. +In @samp{hmat-cache} option, @var{node-id} is the NUMA-id of the memory belongs. +@var{size} is the size of memory side cache in bytes. @var{total} is the total cache levels. +@var{level} is the cache level described in this structure. @var{assoc} is the cache associativity. +"none/direct-mapped/complex(complex cache indexing). @var{policy} is the write policy. +@var{line} is the cache Line size in bytes. + For example, the following option assigns NUMA node 0 and 1. Node 0 has 2 cpus and a ram, node 1 has only a ram. The processors in node 0 access memory in node 0 with access-latency 5 picoseconds(base latency is 10), access-bandwidth 5 MB/s(base latency is 20); The processors in NUMA node 0 access memory in NUMA node 1 with access-latency 10 picoseconds(base latency is 10), access-bandwidth 10 MB/s(base latency is 20). +And for memory side cache information, NUMA node 0 and 1 both have 1 level memory +cache, size is 0x20000 bytes, policy is write-back, the cache Line size is 8 bytes: @example -m 2G \ -object memory-backend-ram,size=1024M,policy=bind,host-nodes=0,id=ram-node0 -numa node,nodeid=0,memdev=ram-node0 \
@@ -291,6 +301,8 @@ picoseconds(base latency is 10), access-bandwidth 10 MB/s(base latency is 20). -numa hmat-lb,initiator=0,target=0,hierarchy=memory,data-type=access-bandwidth,base-bw=20,bandwidth=5 \ -numa hmat-lb,initiator=0,target=1,hierarchy=memory,data-type=access-latency,base-lat=10,latency=10 \ -numa hmat-lb,initiator=0,target=1,hierarchy=memory,data-type=access-bandwidth,base-bw=20,bandwidth=10 \ +-numa hmat-cache,node-id=0,size=0x20000,total=1,level=1,assoc=direct,policy=write-back,line=8 \ +-numa hmat-cache,node-id=1,size=0x20000,total=1,level=1,assoc=direct,policy=write-back,line=8 \ @end example ETEXI
Signature · 1 line
2.20.1
PATCH RESEND v8 11/11 tests/bios-tables-test: add test cases for ACPI HMAT
In reply to Tao XuACPI table HMAT has been introduced, QEMU now builds HMAT tables for Heterogeneous Memory with boot option '-numa node'.
Add test cases on PC and Q35 machines with 2 numa nodes. Because HMAT is generated when system enable numa, the following tables need to be added for this test:
tests/acpi-test-data/pc/*.acpihmat tests/acpi-test-data/pc/HMAT.* tests/acpi-test-data/q35/*.acpihmat tests/acpi-test-data/q35/HMAT.*
---
No changes in v8.
--- tests/bios-tables-test.c | 43 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+)
tests/bios-tables-test.c +43 -0
@@ -871,6 +871,47 @@ static void test_acpi_piix4_tcg_dimm_pxm(void)test_acpi_tcg_dimm_pxm (MACHINE_PC ); } +static void test_acpi_tcg_acpi_hmat (const char *machine) +{ +test_data data; + +memset (&data,0 ,sizeof (data)); + data.machine = machine; + data.variant =".acpihmat" ; +test_acpi_one (" -smp 2,sockets=2" +" -m 128M,slots=2,maxmem=1G" +" -object memory-backend-ram,size=64M,id=m0" +" -object memory-backend-ram,size=64M,id=m1" +" -numa node,nodeid=0,memdev=m0" +" -numa node,nodeid=1,memdev=m1,initiator=0" +" -numa cpu,node-id=0,socket-id=0" +" -numa cpu,node-id=0,socket-id=1" +" -numa hmat-lb,initiator=0,target=0,hierarchy=memory," +"data-type=access-latency,base-lat=10,latency=5" +" -numa hmat-lb,initiator=0,target=0,hierarchy=memory," +"data-type=access-bandwidth,base-bw=20,bandwidth=5" +" -numa hmat-lb,initiator=0,target=1,hierarchy=memory," +"data-type=access-latency,base-lat=10,latency=10" +" -numa hmat-lb,initiator=0,target=1,hierarchy=memory," +"data-type=access-bandwidth,base-bw=20,bandwidth=10" +" -numa hmat-cache,node-id=0,size=0x20000,total=1,level=1" +",assoc=direct,policy=write-back,line=8" +" -numa hmat-cache,node-id=1,size=0x20000,total=1,level=1" +",assoc=direct,policy=write-back,line=8" , + &data); +free_test_data (&data); +} + +static void test_acpi_q35_tcg_acpi_hmat (void ) +{ +test_acpi_tcg_acpi_hmat (MACHINE_Q35 ); +} + +static void test_acpi_piix4_tcg_acpi_hmat (void ) +{ +test_acpi_tcg_acpi_hmat (MACHINE_PC ); +} +static void test_acpi_virt_tcg (void ) {test_data data = {
@@ -915,6 +956,8 @@ int main(int argc, char *argv[])qtest_add_func ("acpi/q35/numamem" , test_acpi_q35_tcg_numamem);qtest_add_func ("acpi/piix4/dimmpxm" , test_acpi_piix4_tcg_dimm_pxm);qtest_add_func ("acpi/q35/dimmpxm" , test_acpi_q35_tcg_dimm_pxm); +qtest_add_func ("acpi/piix4/acpihmat" , test_acpi_piix4_tcg_acpi_hmat); +qtest_add_func ("acpi/q35/acpihmat" , test_acpi_q35_tcg_acpi_hmat); }else if (strcmp (arch,"aarch64" ) ==0 ) {qtest_add_func ("acpi/virt" , test_acpi_virt_tcg); }
Signature · 1 line
2.20.1
Patchew URL: https://patchew.org/QEMU/[email protected]/
Patchew URL: https://patchew.org/QEMU/[email protected]/
Hi,
This series failed the asan build test. Please find the testing commands and their output below. If you have Docker installed, you can probably reproduce it locally.
=== TEST SCRIPT BEGIN ===
#!/bin/bash
make docker-image-fedora V=1 NETWORK=1
time make docker-test-debug@fedora TARGET_LIST=x86_64-softmmu J=14 NETWORK=1 === TEST SCRIPT END ===
PASS 1 fdc-test /x86_64/fdc/cmos
PASS 2 fdc-test /x86_64/fdc/no_media_on_start
PASS 3 fdc-test /x86_64/fdc/read_without_media
==13160==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 4 fdc-test /x86_64/fdc/media_change
PASS 5 fdc-test /x86_64/fdc/sense_interrupt
PASS 6 fdc-test /x86_64/fdc/relative_seek
---
PASS 32 test-opts-visitor /visitor/opts/range/beyond
PASS 33 test-opts-visitor /visitor/opts/dict/unvisited
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-coroutine -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-coroutine"
==13192==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==13192==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffed6d15000; bottom 0x7f6c7d6f8000; size: 0x00925961d000 (628564807680)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 1 test-coroutine /basic/no-dangling-access
---
PASS 12 test-aio /aio/event/flush
PASS 13 test-aio /aio/event/wait/no-flush-cb
PASS 11 fdc-test /x86_64/fdc/read_no_dma_18
==13211==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 14 test-aio /aio/timer/schedule
PASS 15 test-aio /aio/coroutine/queue-chaining
PASS 16 test-aio /aio-gsource/flush
---
PASS 28 test-aio /aio-gsource/timer/schedule
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-aio-multithread -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-aio-multithread"
PASS 12 fdc-test /x86_64/fdc/read_no_dma_19
==13217==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-aio-multithread /aio/multi/lifecycle
PASS 13 fdc-test /x86_64/fdc/fuzz-registers
PASS 2 test-aio-multithread /aio/multi/schedule
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} QTEST_QEMU_BINARY=x86_64-softmmu/qemu-system-x86_64 QTEST_QEMU_IMG=qemu-img tests/ide-test -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="ide-test" PASS 3 test-aio-multithread /aio/multi/mutex/contended
==13240==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 ide-test /x86_64/ide/identify
==13251==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 2 ide-test /x86_64/ide/flush
==13257==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 4 test-aio-multithread /aio/multi/mutex/handoff
PASS 3 ide-test /x86_64/ide/bmdma/simple_rw
==13268==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 5 test-aio-multithread /aio/multi/mutex/mcs
PASS 4 ide-test /x86_64/ide/bmdma/trim
==13279==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 6 test-aio-multithread /aio/multi/mutex/pthread
PASS 5 ide-test /x86_64/ide/bmdma/short_prdt
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-throttle -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-throttle"
==13286==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==13288==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-throttle /throttle/leak_bucket
PASS 2 test-throttle /throttle/compute_wait
PASS 3 test-throttle /throttle/init
---
PASS 15 test-throttle /throttle/config/iops_size
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-thread-pool -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-thread-pool"
PASS 6 ide-test /x86_64/ide/bmdma/one_sector_short_prdt
==13298==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-thread-pool /thread-pool/submit
PASS 2 test-thread-pool /thread-pool/submit-aio
PASS 3 test-thread-pool /thread-pool/submit-co
PASS 4 test-thread-pool /thread-pool/submit-many
==13300==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 7 ide-test /x86_64/ide/bmdma/long_prdt
==13371==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==13371==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffc4c145000; bottom 0x7eff9c9fe000; size: 0x00fcaf747000 (1085275402240)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 5 test-thread-pool /thread-pool/cancel
PASS 8 ide-test /x86_64/ide/bmdma/no_busmaster
PASS 9 ide-test /x86_64/ide/flush/nodev
PASS 6 test-thread-pool /thread-pool/cancel-async
==13383==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-hbitmap -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-hbitmap"
PASS 10 ide-test /x86_64/ide/flush/empty_drive
PASS 1 test-hbitmap /hbitmap/granularity
---
PASS 3 test-hbitmap /hbitmap/size/unaligned
PASS 4 test-hbitmap /hbitmap/iter/empty
PASS 5 test-hbitmap /hbitmap/iter/partial
==13393==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 6 test-hbitmap /hbitmap/iter/granularity
PASS 7 test-hbitmap /hbitmap/iter/iter_and_reset
PASS 8 test-hbitmap /hbitmap/get/all
---
PASS 14 test-hbitmap /hbitmap/set/twice
PASS 15 test-hbitmap /hbitmap/set/overlap
PASS 16 test-hbitmap /hbitmap/reset/empty
==13399==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 17 test-hbitmap /hbitmap/reset/general
PASS 18 test-hbitmap /hbitmap/reset/all
PASS 19 test-hbitmap /hbitmap/truncate/nop
---
PASS 29 test-hbitmap /hbitmap/truncate/shrink/large
PASS 30 test-hbitmap /hbitmap/meta/zero
PASS 12 ide-test /x86_64/ide/flush/retry_isa
==13405==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 13 ide-test /x86_64/ide/cdrom/pio
==13411==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 14 ide-test /x86_64/ide/cdrom/pio_large
==13417==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 15 ide-test /x86_64/ide/cdrom/dma
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} QTEST_QEMU_BINARY=x86_64-softmmu/qemu-system-x86_64 QTEST_QEMU_IMG=qemu-img tests/ahci-test -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="ahci-test" PASS 31 test-hbitmap /hbitmap/meta/one
---
PASS 33 test-hbitmap /hbitmap/meta/word
PASS 34 test-hbitmap /hbitmap/meta/sector
PASS 35 test-hbitmap /hbitmap/serialize/align
==13431==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 ahci-test /x86_64/ahci/sanity
==13437==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 36 test-hbitmap /hbitmap/serialize/basic
PASS 37 test-hbitmap /hbitmap/serialize/part
PASS 38 test-hbitmap /hbitmap/serialize/zeroes
---
PASS 43 test-hbitmap /hbitmap/next_dirty_area/next_dirty_area_4
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-bdrv-drain -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-bdrv-drain"
PASS 2 ahci-test /x86_64/ahci/pci_spec
==13445==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-bdrv-drain /bdrv-drain/nested
PASS 2 test-bdrv-drain /bdrv-drain/multiparent
PASS 3 test-bdrv-drain /bdrv-drain/set_aio_context
---
PASS 38 test-bdrv-drain /bdrv-drain/detach/parent_cb
PASS 39 test-bdrv-drain /bdrv-drain/detach/driver_cb
PASS 40 test-bdrv-drain /bdrv-drain/attach/drain
==13447==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-bdrv-graph-mod -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-bdrv-graph-mod"
==13490==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-bdrv-graph-mod /bdrv-graph-mod/update-perm-tree
PASS 2 test-bdrv-graph-mod /bdrv-graph-mod/should-update-child
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-blockjob -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-blockjob"
PASS 3 ahci-test /x86_64/ahci/pci_enable
==13496==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-blockjob /blockjob/ids
PASS 2 test-blockjob /blockjob/cancel/created
PASS 3 test-blockjob /blockjob/cancel/running
---
PASS 6 test-blockjob /blockjob/cancel/standby
PASS 7 test-blockjob /blockjob/cancel/pending
PASS 8 test-blockjob /blockjob/cancel/concluded
==13498==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-blockjob-txn -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-blockjob-txn"
==13506==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-blockjob-txn /single/success
PASS 2 test-blockjob-txn /single/failure
PASS 3 test-blockjob-txn /single/cancel
---
PASS 7 test-blockjob-txn /pair/fail-cancel-race
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-block-backend -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-block-backend"
PASS 4 ahci-test /x86_64/ahci/hba_spec
==13512==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-block-backend /block-backend/drain_aio_error
PASS 2 test-block-backend /block-backend/drain_all_aio_error
==13514==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-block-iothread -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-block-iothread"
==13523==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-block-iothread /sync-op/pread
PASS 2 test-block-iothread /sync-op/pwrite
PASS 3 test-block-iothread /sync-op/load_vmstate
---
PASS 16 test-block-iothread /propagate/mirror
PASS 5 ahci-test /x86_64/ahci/hba_enable
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-image-locking -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-image-locking"
==13545==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-image-locking /image-locking/basic
PASS 2 test-image-locking /image-locking/set-perm-abort
==13543==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-x86-cpuid -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-x86-cpuid"
PASS 1 test-x86-cpuid /cpuid/topology/basic
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-xbzrle -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-xbzrle"
---
PASS 5 test-xbzrle /xbzrle/encode_decode_overflow
PASS 6 ahci-test /x86_64/ahci/identify
PASS 6 test-xbzrle /xbzrle/encode_decode
==13561==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-vmstate -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-vmstate"
PASS 1 test-vmstate /vmstate/tmp_struct
PASS 2 test-vmstate /vmstate/simple/primitive
---
PASS 1 test-mul64 /host-utils/mulu64
PASS 2 test-mul64 /host-utils/muls64
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-int128 -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-int128"
==13581==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-int128 /int128/int128_and
PASS 2 test-int128 /int128/int128_add
PASS 3 test-int128 /int128/int128_sub
---
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/rcutorture -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="rcutorture"
PASS 1 rcutorture /rcu/torture/1reader
PASS 8 ahci-test /x86_64/ahci/reset
==13622==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==13622==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7fff78e0c000; bottom 0x7f9d6d3fe000; size: 0x00620ba0e000 (421101887488)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 2 rcutorture /rcu/torture/10readers
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-rcu-list -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-rcu-list"
PASS 9 ahci-test /x86_64/ahci/io/pio/lba28/simple/zero
==13635==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==13635==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffe90dac000; bottom 0x7f97c27fe000; size: 0x0066ce5ae000 (441548726272)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 1 test-rcu-list /rcu/qlist/single-threaded
PASS 10 ahci-test /x86_64/ahci/io/pio/lba28/simple/low
PASS 2 test-rcu-list /rcu/qlist/short-few
==13647==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==13647==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffc8123e000; bottom 0x7f2ab05fe000; size: 0x00d1d0c40000 (901150670848)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 11 ahci-test /x86_64/ahci/io/pio/lba28/simple/high
==13674==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==13674==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffec5518000; bottom 0x7f51eb3fe000; size: 0x00acda11a000 (742392963072)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 3 test-rcu-list /rcu/qlist/long-many
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-rcu-simpleq -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-rcu-simpleq"
PASS 12 ahci-test /x86_64/ahci/io/pio/lba28/double/zero
==13687==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==13687==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffd4b50c000; bottom 0x7f34b2bfe000; size: 0x00c89890e000 (861553090560)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 1 test-rcu-simpleq /rcu/qsimpleq/single-threaded
PASS 13 ahci-test /x86_64/ahci/io/pio/lba28/double/low
==13699==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 2 test-rcu-simpleq /rcu/qsimpleq/short-few
==13699==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffe608ec000; bottom 0x7f87063fe000; size: 0x00775a4ee000 (512616226816)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 14 ahci-test /x86_64/ahci/io/pio/lba28/double/high
==13726==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==13726==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffe7e518000; bottom 0x7f56ea124000; size: 0x00a7943f4000 (719746711552)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 3 test-rcu-simpleq /rcu/qsimpleq/long-many
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-rcu-tailq -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-rcu-tailq"
PASS 15 ahci-test /x86_64/ahci/io/pio/lba28/long/zero
==13739==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-rcu-tailq /rcu/qtailq/single-threaded
==13739==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffc12459000; bottom 0x7f3e9a7fe000; size: 0x00bd77c5b000 (813758263296)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 16 ahci-test /x86_64/ahci/io/pio/lba28/long/low
PASS 2 test-rcu-tailq /rcu/qtailq/short-few
==13751==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==13751==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7fff0ffa5000; bottom 0x7fc284ffe000; size: 0x003c8afa7000 (260029706240)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 17 ahci-test /x86_64/ahci/io/pio/lba28/long/high
==13778==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 3 test-rcu-tailq /rcu/qtailq/long-many
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-qdist -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-qdist"
PASS 1 test-qdist /qdist/none
---
PASS 8 test-qdist /qdist/binning/shrink
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-qht -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-qht"
PASS 18 ahci-test /x86_64/ahci/io/pio/lba28/short/zero
==13793==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 19 ahci-test /x86_64/ahci/io/pio/lba28/short/low
==13799==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 20 ahci-test /x86_64/ahci/io/pio/lba28/short/high
==13805==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==13805==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7fff872ff000; bottom 0x7fbd835fe000; size: 0x004203d01000 (283531808768)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 21 ahci-test /x86_64/ahci/io/pio/lba48/simple/zero
==13811==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==13811==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffe5da2a000; bottom 0x7f62cadfe000; size: 0x009b92c2c000 (668182167552)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 22 ahci-test /x86_64/ahci/io/pio/lba48/simple/low
==13817==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==13817==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffcf718e000; bottom 0x7fa8eb3fe000; size: 0x00540bd90000 (360976023552)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 23 ahci-test /x86_64/ahci/io/pio/lba48/simple/high
==13823==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==13823==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffc25a3b000; bottom 0x7fca6dbfe000; size: 0x0031b7e3d000 (213538557952)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 24 ahci-test /x86_64/ahci/io/pio/lba48/double/zero
==13829==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==13829==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffe4dbd5000; bottom 0x7f45941fe000; size: 0x00b8b99d7000 (793388085248)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 25 ahci-test /x86_64/ahci/io/pio/lba48/double/low
==13835==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==13835==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffd63f4a000; bottom 0x7f4f4cffe000; size: 0x00ae16f4c000 (747709448192)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 26 ahci-test /x86_64/ahci/io/pio/lba48/double/high
==13841==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==13841==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffda003a000; bottom 0x7fa4717fe000; size: 0x00592e83c000 (383032475648)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 27 ahci-test /x86_64/ahci/io/pio/lba48/long/zero
==13847==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==13847==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7fff1e8d2000; bottom 0x7fed5a17c000; size: 0x0011c4756000 (76310470656)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 28 ahci-test /x86_64/ahci/io/pio/lba48/long/low
==13853==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==13853==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7fff88a01000; bottom 0x7fa0e537c000; size: 0x005ea3685000 (406468448256)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 1 test-qht /qht/mode/default
PASS 2 test-qht /qht/mode/resize
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-qht-par -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-qht-par"
PASS 29 ahci-test /x86_64/ahci/io/pio/lba48/long/high
==13869==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-qht-par /qht/parallel/2threads-0%updates-1s
PASS 30 ahci-test /x86_64/ahci/io/pio/lba48/short/zero
==13882==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 2 test-qht-par /qht/parallel/2threads-20%updates-1s
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-bitops -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-bitops"
PASS 1 test-bitops /bitops/sextract32
---
PASS 3 test-bitcnt /bitcnt/ctpop32
PASS 4 test-bitcnt /bitcnt/ctpop64
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-qdev-global-props -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-qdev-global-props"
==13897==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-qdev-global-props /qdev/properties/static/default
PASS 2 test-qdev-global-props /qdev/properties/static/global
PASS 3 test-qdev-global-props /qdev/properties/dynamic/global
---
PASS 9 test-keyval /keyval/visit/alternate
PASS 10 test-keyval /keyval/visit/any
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-write-threshold -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-write-threshold"
==13927==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-write-threshold /write-threshold/not-set-on-init
PASS 2 test-write-threshold /write-threshold/set-get
PASS 3 test-write-threshold /write-threshold/multi-set-get
---
PASS 15 test-crypto-secret /crypto/secret/crypt/missingiv
PASS 16 test-crypto-secret /crypto/secret/crypt/badiv
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-crypto-tlscredsx509 -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-crypto-tlscredsx509" ==13952==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 34 ahci-test /x86_64/ahci/io/dma/lba28/retry
==13972==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 35 ahci-test /x86_64/ahci/io/dma/lba28/simple/zero
==13978==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-crypto-tlscredsx509 /qcrypto/tlscredsx509/perfectserver
PASS 2 test-crypto-tlscredsx509 /qcrypto/tlscredsx509/perfectclient
PASS 3 test-crypto-tlscredsx509 /qcrypto/tlscredsx509/goodca1
PASS 36 ahci-test /x86_64/ahci/io/dma/lba28/simple/low
==13984==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 4 test-crypto-tlscredsx509 /qcrypto/tlscredsx509/goodca2
PASS 37 ahci-test /x86_64/ahci/io/dma/lba28/simple/high
==13990==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 38 ahci-test /x86_64/ahci/io/dma/lba28/double/zero
==13996==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 5 test-crypto-tlscredsx509 /qcrypto/tlscredsx509/goodca3
PASS 6 test-crypto-tlscredsx509 /qcrypto/tlscredsx509/badca1
PASS 7 test-crypto-tlscredsx509 /qcrypto/tlscredsx509/badca2
PASS 8 test-crypto-tlscredsx509 /qcrypto/tlscredsx509/badca3
PASS 39 ahci-test /x86_64/ahci/io/dma/lba28/double/low
PASS 9 test-crypto-tlscredsx509 /qcrypto/tlscredsx509/goodserver1
==14002==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 10 test-crypto-tlscredsx509 /qcrypto/tlscredsx509/goodserver2
PASS 11 test-crypto-tlscredsx509 /qcrypto/tlscredsx509/goodserver3
PASS 40 ahci-test /x86_64/ahci/io/dma/lba28/double/high
PASS 12 test-crypto-tlscredsx509 /qcrypto/tlscredsx509/goodserver4
==14008==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 13 test-crypto-tlscredsx509 /qcrypto/tlscredsx509/goodserver5
PASS 14 test-crypto-tlscredsx509 /qcrypto/tlscredsx509/goodserver6
PASS 41 ahci-test /x86_64/ahci/io/dma/lba28/long/zero
==14014==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 15 test-crypto-tlscredsx509 /qcrypto/tlscredsx509/goodserver7
PASS 16 test-crypto-tlscredsx509 /qcrypto/tlscredsx509/badserver1
PASS 17 test-crypto-tlscredsx509 /qcrypto/tlscredsx509/badserver2
---
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-crypto-tlssession -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-crypto-tlssession"
PASS 42 ahci-test /x86_64/ahci/io/dma/lba28/long/low
PASS 1 test-crypto-tlssession /qcrypto/tlssession/psk
==14025==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 2 test-crypto-tlssession /qcrypto/tlssession/basicca
PASS 3 test-crypto-tlssession /qcrypto/tlssession/differentca
PASS 43 ahci-test /x86_64/ahci/io/dma/lba28/long/high
==14031==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 4 test-crypto-tlssession /qcrypto/tlssession/altname1
PASS 44 ahci-test /x86_64/ahci/io/dma/lba28/short/zero
PASS 5 test-crypto-tlssession /qcrypto/tlssession/altname2
==14037==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 6 test-crypto-tlssession /qcrypto/tlssession/altname3
PASS 45 ahci-test /x86_64/ahci/io/dma/lba28/short/low
PASS 7 test-crypto-tlssession /qcrypto/tlssession/altname4
==14043==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 8 test-crypto-tlssession /qcrypto/tlssession/altname5
PASS 46 ahci-test /x86_64/ahci/io/dma/lba28/short/high
PASS 9 test-crypto-tlssession /qcrypto/tlssession/altname6
==14049==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 10 test-crypto-tlssession /qcrypto/tlssession/wildcard1
PASS 47 ahci-test /x86_64/ahci/io/dma/lba48/simple/zero
PASS 11 test-crypto-tlssession /qcrypto/tlssession/wildcard2
==14055==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 48 ahci-test /x86_64/ahci/io/dma/lba48/simple/low
PASS 12 test-crypto-tlssession /qcrypto/tlssession/wildcard3
==14061==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 13 test-crypto-tlssession /qcrypto/tlssession/wildcard4
PASS 14 test-crypto-tlssession /qcrypto/tlssession/wildcard5
PASS 49 ahci-test /x86_64/ahci/io/dma/lba48/simple/high
==14067==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 15 test-crypto-tlssession /qcrypto/tlssession/wildcard6
PASS 50 ahci-test /x86_64/ahci/io/dma/lba48/double/zero
PASS 16 test-crypto-tlssession /qcrypto/tlssession/cachain
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-qga -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-qga"
==14074==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 51 ahci-test /x86_64/ahci/io/dma/lba48/double/low
PASS 1 test-qga /qga/sync-delimited
PASS 2 test-qga /qga/sync
---
PASS 15 test-qga /qga/invalid-cmd
PASS 16 test-qga /qga/invalid-args
PASS 17 test-qga /qga/fsfreeze-status
==14086==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 52 ahci-test /x86_64/ahci/io/dma/lba48/double/high
PASS 18 test-qga /qga/blacklist
PASS 19 test-qga /qga/config
PASS 20 test-qga /qga/guest-exec
PASS 21 test-qga /qga/guest-exec-invalid
==14093==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 53 ahci-test /x86_64/ahci/io/dma/lba48/long/zero
PASS 22 test-qga /qga/guest-get-osinfo
PASS 23 test-qga /qga/guest-get-host-name
---
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-util-filemonitor -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-util-filemonitor"
PASS 1 test-util-filemonitor /util/filemonitor
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-util-sockets -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-util-sockets"
==14107==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-util-sockets /util/socket/is-socket/bad
PASS 2 test-util-sockets /util/socket/is-socket/good
PASS 3 test-util-sockets /socket/fd-pass/name/good
---
PASS 8 test-io-channel-socket /io/channel/socket/unix-fd-pass
PASS 9 test-io-channel-socket /io/channel/socket/unix-listen-cleanup
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-io-channel-file -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-io-channel-file"
==14145==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-io-channel-file /io/channel/file
PASS 2 test-io-channel-file /io/channel/file/rdwr
PASS 3 test-io-channel-file /io/channel/file/fd
---
PASS 3 test-base64 /util/base64/not-nul-terminated
PASS 4 test-base64 /util/base64/invalid-chars
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-crypto-pbkdf -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-crypto-pbkdf"
==14225==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-crypto-pbkdf /crypto/pbkdf/rfc3962/sha1/iter1
PASS 2 test-crypto-pbkdf /crypto/pbkdf/rfc3962/sha1/iter2
PASS 3 test-crypto-pbkdf /crypto/pbkdf/rfc3962/sha1/iter1200a
---
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-crypto-block -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-crypto-block"
PASS 1 test-crypto-block /crypto/block/qcow
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-logging -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-logging"
==14252==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-logging /logging/parse_range
PASS 2 test-logging /logging/parse_path
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-replication -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-replication"
==14272==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 57 ahci-test /x86_64/ahci/io/dma/lba48/short/low
PASS 1 test-replication /replication/primary/read
PASS 2 test-replication /replication/primary/write
==14277==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 3 test-replication /replication/primary/start
PASS 4 test-replication /replication/primary/stop
PASS 5 test-replication /replication/primary/do_checkpoint
PASS 6 test-replication /replication/primary/get_error_all
PASS 58 ahci-test /x86_64/ahci/io/dma/lba48/short/high
==14283==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 7 test-replication /replication/secondary/read
PASS 59 ahci-test /x86_64/ahci/io/ncq/simple
PASS 8 test-replication /replication/secondary/write
==14289==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 60 ahci-test /x86_64/ahci/io/ncq/retry
==14295==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 61 ahci-test /x86_64/ahci/flush/simple
==14272==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffec5e41000; bottom 0x7fdccb3fc000; size: 0x0021faa45000 (145938993152)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
==14301==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 62 ahci-test /x86_64/ahci/flush/retry
PASS 9 test-replication /replication/secondary/start
==14327==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==14332==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 10 test-replication /replication/secondary/stop
PASS 63 ahci-test /x86_64/ahci/flush/migrate
==14341==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 11 test-replication /replication/secondary/do_checkpoint
==14347==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 12 test-replication /replication/secondary/get_error_all
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-bufferiszero -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-bufferiszero"
PASS 64 ahci-test /x86_64/ahci/migrate/sanity
==14360==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==14365==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 65 ahci-test /x86_64/ahci/migrate/dma/simple
==14374==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==14379==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 66 ahci-test /x86_64/ahci/migrate/dma/halted
==14388==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==14393==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 67 ahci-test /x86_64/ahci/migrate/ncq/simple
==14402==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==14407==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 68 ahci-test /x86_64/ahci/migrate/ncq/halted
==14416==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 69 ahci-test /x86_64/ahci/cdrom/eject
==14421==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 70 ahci-test /x86_64/ahci/cdrom/dma/single
==14427==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 71 ahci-test /x86_64/ahci/cdrom/dma/multi
==14433==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 72 ahci-test /x86_64/ahci/cdrom/pio/single
==14439==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==14439==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7fffca9ab000; bottom 0x7f5d105fe000; size: 0x00a2ba3ad000 (698909118464)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 73 ahci-test /x86_64/ahci/cdrom/pio/multi
==14445==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 74 ahci-test /x86_64/ahci/cdrom/pio/bcl
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} QTEST_QEMU_BINARY=x86_64-softmmu/qemu-system-x86_64 QTEST_QEMU_IMG=qemu-img tests/hd-geo-test -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="hd-geo-test" PASS 1 hd-geo-test /x86_64/hd-geo/ide/none
==14459==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 2 hd-geo-test /x86_64/hd-geo/ide/drive/cd_0
==14465==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 3 hd-geo-test /x86_64/hd-geo/ide/drive/mbr/blank
==14471==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 4 hd-geo-test /x86_64/hd-geo/ide/drive/mbr/lba
==14477==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-bufferiszero /cutils/bufferiszero
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-uuid -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-uuid"
PASS 5 hd-geo-test /x86_64/hd-geo/ide/drive/mbr/chs
---
PASS 527 ptimer-test /ptimer/periodic_with_load_0 policy=wrap_after_one_period,continuous_trigger,no_immediate_reload,no_counter_rounddown,trigger_only_on_decrement,
PASS 528 ptimer-test /ptimer/oneshot_with_load_0 policy=wrap_after_one_period,continuous_trigger,no_immediate_reload,no_counter_rounddown,trigger_only_on_decrement,
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-qapi-util -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-qapi-util"
==14488==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-qapi-util /qapi/util/qapi_enum_parse
PASS 2 test-qapi-util /qapi/util/parse_qapi_name
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-qgraph -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-qgraph"
---
PASS 22 test-qgraph /qgraph/test_test_in_path
PASS 23 test-qgraph /qgraph/test_double_edge
PASS 6 hd-geo-test /x86_64/hd-geo/ide/device/mbr/blank
==14506==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 7 hd-geo-test /x86_64/hd-geo/ide/device/mbr/lba
==14512==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 8 hd-geo-test /x86_64/hd-geo/ide/device/mbr/chs
==14518==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 9 hd-geo-test /x86_64/hd-geo/ide/device/user/chs
==14523==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 10 hd-geo-test /x86_64/hd-geo/ide/device/user/chst
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} QTEST_QEMU_BINARY=x86_64-softmmu/qemu-system-x86_64 QTEST_QEMU_IMG=qemu-img tests/boot-order-test -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="boot-order-test" PASS 1 boot-order-test /x86_64/boot-order/pc
---
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
==14591==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
Looking for expected file 'tests/data/acpi/pc/FACP'
Using expected file 'tests/data/acpi/pc/FACP'
---
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
==14597==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
Looking for expected file 'tests/data/acpi/q35/FACP'
Using expected file 'tests/data/acpi/q35/FACP'
---
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
==14603==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
Looking for expected file 'tests/data/acpi/pc/FACP.bridge'
Looking for expected file 'tests/data/acpi/pc/FACP'
---
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
==14609==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
Looking for expected file 'tests/data/acpi/pc/FACP.ipmikcs'
Looking for expected file 'tests/data/acpi/pc/FACP'
---
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
==14615==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
Looking for expected file 'tests/data/acpi/pc/FACP.cphp'
Looking for expected file 'tests/data/acpi/pc/FACP'
---
Looking for expected file 'tests/data/acpi/pc/HMAT.cphp'
Looking for expected file 'tests/data/acpi/pc/HMAT'
**
ERROR:/tmp/qemu-test/src/tests/bios-tables-test.c:327:load_expected_aml: assertion failed: (exp_sdt.aml_file) ERROR - Bail out! ERROR:/tmp/qemu-test/src/tests/bios-tables-test.c:327:load_expected_aml: assertion failed: (exp_sdt.aml_file)
make: *** [/tmp/qemu-test/src/tests/Makefile.include:899: check-qtest-x86_64] Error 1
make: *** Waiting for unfinished jobs....
Traceback (most recent call last):
The full log is available at
http://patchew.org/logs/[email protected]/testing.asan/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to [email protected]