Speculative mitigation facilities report wrong status
PATCH 1/1 Speculative mitigation facilities report wrong status
Diff with 'spec-ctrl=no' and without.
====================================================
xen.dmesg.6.log 2019-07-31 14:59:50.223516313 +0800 renamed from xen.dmesg.5.log 2019-07-31 14:55:38.138173874 +0800 +6 -6
@@ -7,7 +7,7 @@ (XEN) Xen version 4.12.0_14-1 ([email protected]) (gcc (SUSE Linux) 4.8.5) debug=n Mon Jun 17 15:08:33 UTC 2019 (XEN) Latest ChangeSet: (XEN) Bootloader: GRUB2 2.02 -(XEN) Command line: vga=gfx-1024x768x16 crashkernel=251M<4G ucode=scan console=vga,com1 loglvl=all guest_loglvl=all +(XEN) Command line: vga=gfx-1024x768x16 crashkernel=251M<4G ucode=scan spec-ctrl=no console=vga,com1 loglvl=all guest_loglvl=all (XEN) Xen image load base address: 0 (XEN) Video information: (XEN) VGA is graphics mode 1024x768, 16 bpp
@@ -159,12 +159,12 @@ (XEN) Speculative mitigation facilities: (XEN) Hardware features: IBRS/IBPB STIBP L1D_FLUSH SSBD MD_CLEAR (XEN) Compiled-in support: INDIRECT_THUNK SHADOW_PAGING -(XEN) Xen settings: BTI-Thunk JMP, SPEC_CTRL: IBRS+ SSBD-, Other: IBPB L1D_FLUSH VERW +(XEN) Xen settings: BTI-Thunk JMP, SPEC_CTRL: IBRS- SSBD-, Other: (XEN) L1TF: believed vulnerable, maxphysaddr L1D 46, CPUID 46, Safe address 300000000000 -(XEN) Support for HVM VMs: MSR_SPEC_CTRL RSB EAGER_FPU MD_CLEAR -(XEN) Support for PV VMs: MSR_SPEC_CTRL RSB EAGER_FPU MD_CLEAR -(XEN) XPTI (64-bit PV only): Dom0 enabled, DomU enabled (with PCID) -(XEN) PV L1TF shadowing: Dom0 disabled, DomU enabled +(XEN) Support for HVM VMs: None MD_CLEAR +(XEN) Support for PV VMs: None MD_CLEAR +(XEN) XPTI (64-bit PV only): Dom0 disabled, DomU disabled (with PCID) +(XEN) PV L1TF shadowing: Dom0 disabled, DomU disabled (XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2) (XEN) Initializing Credit2 scheduler (XEN) load_precision_shift: 18
==================================================
In "Support for HVM VMs: Support for PV VMs: " lines, Others feature is reported as "NONE", MD_CLEAR not.
code review:xen/arch/x86/spec_ctrl.c:
99 disable_common:
100 opt_rsb_pv = false; 101 opt_rsb_hvm = false; 102 opt_md_clear_pv = 0; <----- they have been disable when 'spec-ctrl=no' 103 opt_md_clear_hvm = 0;
104
X86_FEATURE_SC_VERW_PV, X86_FEATURE_SC_VERW_HVM will not be enabled
1070 if ( opt_md_clear_pv )
1071 setup_force_cpu_cap(X86_FEATURE_SC_VERW_PV);
1072 if ( opt_md_clear_pv || opt_md_clear_hvm )
1073 setup_force_cpu_cap(X86_FEATURE_SC_VERW_IDLE);
1074 if ( opt_md_clear_hvm && !(caps & ARCH_CAPS_SKIP_L1DFL) && !opt_l1d_flush )
1075 setup_force_cpu_cap(X86_FEATURE_SC_VERW_HVM);
But when we report the status of MD_CLEAR, we use X86_FEATURE_MD_CLEAR to check. it seems not good.
360 printk(" Support for HVM VMs:%s%s%s%s%s\n",
361 (boot_cpu_has(X86_FEATURE_SC_MSR_HVM) ||
362 boot_cpu_has(X86_FEATURE_SC_RSB_HVM) ||
363 opt_eager_fpu) ? "" : " None",
364 boot_cpu_has(X86_FEATURE_SC_MSR_HVM) ? " MSR_SPEC_CTRL" : "",
365 boot_cpu_has(X86_FEATURE_SC_RSB_HVM) ? " RSB" : "",
366 opt_eager_fpu ? " EAGER_FPU" : "",
367 ----> boot_cpu_has(X86_FEATURE_MD_CLEAR) ? " MD_CLEAR" : "");
368
369 #endif
370 #ifdef CONFIG_PV
371 printk(" Support for PV VMs:%s%s%s%s%s\n",
372 (boot_cpu_has(X86_FEATURE_SC_MSR_PV) ||
373 boot_cpu_has(X86_FEATURE_SC_RSB_PV) ||
374 opt_eager_fpu) ? "" : " None",
375 boot_cpu_has(X86_FEATURE_SC_MSR_PV) ? " MSR_SPEC_CTRL" : "",
376 boot_cpu_has(X86_FEATURE_SC_RSB_PV) ? " RSB" : "",
377 opt_eager_fpu ? " EAGER_FPU" : "",
378 ----> boot_cpu_has(X86_FEATURE_MD_CLEAR) ? " MD_CLEAR" : "");There is a patch for this issue.
xen/arch/x86/spec_ctrl.c +4 -2
@@ -360,22 +360,24 @@ static void __init print_details(enum inprintk (" Support for HVM VMs:%s%s%s%s%s\n" , (boot_cpu_has (X86_FEATURE_SC_MSR_HVM ) ||boot_cpu_has (X86_FEATURE_SC_RSB_HVM ) || +boot_cpu_has (X86_FEATURE_SC_VERW_HVM ) || opt_eager_fpu) ?"" :" None" ,boot_cpu_has (X86_FEATURE_SC_MSR_HVM ) ?" MSR_SPEC_CTRL" :"" ,boot_cpu_has (X86_FEATURE_SC_RSB_HVM ) ?" RSB" :"" , opt_eager_fpu ?" EAGER_FPU" :"" , -boot_cpu_has (X86_FEATURE_MD_CLEAR ) ?" MD_CLEAR" :"" ); +boot_cpu_has (X86_FEATURE_SC_VERW_HVM ) ?" MD_CLEAR" :"" );#endif #ifdef CONFIG_PV printk (" Support for PV VMs:%s%s%s%s%s\n" , (boot_cpu_has (X86_FEATURE_SC_MSR_PV ) ||boot_cpu_has (X86_FEATURE_SC_RSB_PV ) || +boot_cpu_has (X86_FEATURE_SC_VERW_PV ) || opt_eager_fpu) ?"" :" None" ,boot_cpu_has (X86_FEATURE_SC_MSR_PV ) ?" MSR_SPEC_CTRL" :"" ,boot_cpu_has (X86_FEATURE_SC_RSB_PV ) ?" RSB" :"" , opt_eager_fpu ?" EAGER_FPU" :"" , -boot_cpu_has (X86_FEATURE_MD_CLEAR ) ?" MD_CLEAR" :"" ); +boot_cpu_has (X86_FEATURE_SC_VERW_PV ) ?" MD_CLEAR" :"" ); printk(" XPTI (64-bit PV only): Dom0 %s, DomU %s (with%s PCID)\n", opt_xpti_hwdom ? "enabled" : "disabled",
--- xen/arch/x86/spec_ctrl.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
xen/arch/x86/spec_ctrl.c +4 -2
@@ -366,22 +366,24 @@ static void __init print_details(enum ind_thunk thunk, uint64_t caps)printk (" Support for HVM VMs:%s%s%s%s%s\n" , (boot_cpu_has (X86_FEATURE_SC_MSR_HVM ) ||boot_cpu_has (X86_FEATURE_SC_RSB_HVM ) || +boot_cpu_has (X86_FEATURE_SC_VERW_HVM ) || opt_eager_fpu) ?"" :" None" ,boot_cpu_has (X86_FEATURE_SC_MSR_HVM ) ?" MSR_SPEC_CTRL" :"" ,boot_cpu_has (X86_FEATURE_SC_RSB_HVM ) ?" RSB" :"" , opt_eager_fpu ?" EAGER_FPU" :"" , -boot_cpu_has (X86_FEATURE_MD_CLEAR ) ?" MD_CLEAR" :"" ); +boot_cpu_has (X86_FEATURE_SC_VERW_HVM ) ?" MD_CLEAR" :"" );#endif #ifdef CONFIG_PV printk (" Support for PV VMs:%s%s%s%s%s\n" , (boot_cpu_has (X86_FEATURE_SC_MSR_PV ) ||boot_cpu_has (X86_FEATURE_SC_RSB_PV ) || +boot_cpu_has (X86_FEATURE_SC_VERW_PV ) || opt_eager_fpu) ?"" :" None" ,boot_cpu_has (X86_FEATURE_SC_MSR_PV ) ?" MSR_SPEC_CTRL" :"" ,boot_cpu_has (X86_FEATURE_SC_RSB_PV ) ?" RSB" :"" , opt_eager_fpu ?" EAGER_FPU" :"" , -boot_cpu_has (X86_FEATURE_MD_CLEAR ) ?" MD_CLEAR" :"" ); +boot_cpu_has (X86_FEATURE_SC_VERW_PV ) ?" MD_CLEAR" :"" ); printk(" XPTI (64-bit PV only): Dom0 %s, DomU %s (with%s PCID)\n", opt_xpti_hwdom ? "enabled" : "disabled",
Signature · 6 lines
2.22.0 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xenproject.org/mailman/listinfo/xen-devel
Quoted 77 lines · Jin Nan Wang
Diff with 'spec-ctrl=no' and without.
====================================================xen.dmesg.6.log 2019-07-31 14:59:50.223516313 +0800 renamed from xen.dmesg.5.log 2019-07-31 14:55:38.138173874 +0800 +6
-6@@ -7,7 +7,7 @@ (XEN) Xen version 4.12.0_14-1 ([email protected]) (gcc (SUSE Linux) 4.8.5) debug=n Mon Jun 17 15:08:33 UTC 2019 (XEN) Latest ChangeSet: (XEN) Bootloader: GRUB2 2.02 -(XEN) Command line: vga=gfx-1024x768x16 crashkernel=251M<4G ucode=scan console=vga,com1 loglvl=all guest_loglvl=all +(XEN) Command line: vga=gfx-1024x768x16 crashkernel=251M<4G ucode=scan spec-ctrl=no console=vga,com1 loglvl=all guest_loglvl=all (XEN) Xen image load base address: 0 (XEN) Video information: (XEN) VGA is graphics mode 1024x768, 16 bpp@@ -159,12 +159,12 @@ (XEN) Speculative mitigation facilities: (XEN) Hardware features: IBRS/IBPB STIBP L1D_FLUSH SSBD MD_CLEAR (XEN) Compiled-in support: INDIRECT_THUNK SHADOW_PAGING -(XEN) Xen settings: BTI-Thunk JMP, SPEC_CTRL: IBRS+ SSBD-, Other: IBPB L1D_FLUSH VERW +(XEN) Xen settings: BTI-Thunk JMP, SPEC_CTRL: IBRS- SSBD-, Other: (XEN) L1TF: believed vulnerable, maxphysaddr L1D 46, CPUID 46, Safe address 300000000000 -(XEN) Support for HVM VMs: MSR_SPEC_CTRL RSB EAGER_FPU MD_CLEAR -(XEN) Support for PV VMs: MSR_SPEC_CTRL RSB EAGER_FPU MD_CLEAR -(XEN) XPTI (64-bit PV only): Dom0 enabled, DomU enabled (with PCID) -(XEN) PV L1TF shadowing: Dom0 disabled, DomU enabled +(XEN) Support for HVM VMs: None MD_CLEAR +(XEN) Support for PV VMs: None MD_CLEAR +(XEN) XPTI (64-bit PV only): Dom0 disabled, DomU disabled (with PCID) +(XEN) PV L1TF shadowing: Dom0 disabled, DomU disabled (XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2) (XEN) Initializing Credit2 scheduler (XEN) load_precision_shift: 18==================================================
In "Support for HVM VMs: Support for PV VMs: " lines, Others feature is reported as "NONE",
MD_CLEARnot.code review:
xen/arch/x86/spec_ctrl.c:
99disable_common:100 opt_rsb_pv = false; 101 opt_rsb_hvm = false; 102 opt_md_clear_pv = 0; <----- they have been disable when 'spec-ctrl=no' 103 opt_md_clear_hvm = 0;104
X86_FEATURE_SC_VERW_PV,X86_FEATURE_SC_VERW_HVMwill not be enabled1070 if (
opt_md_clear_pv)
1071setup_force_cpu_cap(X86_FEATURE_SC_VERW_PV);
1072 if (opt_md_clear_pv||opt_md_clear_hvm)
1073setup_force_cpu_cap(X86_FEATURE_SC_VERW_IDLE);
1074 if (opt_md_clear_hvm&& !(caps &ARCH_CAPS_SKIP_L1DFL) && !opt_l1d_flush )
1075setup_force_cpu_cap(X86_FEATURE_SC_VERW_HVM);But when we report the status of
MD_CLEAR, we useX86_FEATURE_MD_CLEARto check. it seems not good.360 printk(" Support for HVM VMs:%s%s%s%s%s\n", 361 (boot_cpu_has(X86_FEATURE_SC_MSR_HVM) || 362 boot_cpu_has(X86_FEATURE_SC_RSB_HVM) || 363 opt_eager_fpu) ? "" : " None", 364 boot_cpu_has(X86_FEATURE_SC_MSR_HVM) ? " MSR_SPEC_CTRL" : "", 365 boot_cpu_has(X86_FEATURE_SC_RSB_HVM) ? " RSB" : "", 366 opt_eager_fpu ? " EAGER_FPU" : "", 367 ----> boot_cpu_has(X86_FEATURE_MD_CLEAR) ? " MD_CLEAR" : ""); 368 369 #endif 370 #ifdef CONFIG_PV 371 printk(" Support for PV VMs:%s%s%s%s%s\n", 372 (boot_cpu_has(X86_FEATURE_SC_MSR_PV) || 373 boot_cpu_has(X86_FEATURE_SC_RSB_PV) || 374 opt_eager_fpu) ? "" : " None", 375 boot_cpu_has(X86_FEATURE_SC_MSR_PV) ? " MSR_SPEC_CTRL" : "", 376 boot_cpu_has(X86_FEATURE_SC_RSB_PV) ? " RSB" : "", 377 opt_eager_fpu ? " EAGER_FPU" : "", 378 ----> boot_cpu_has(X86_FEATURE_MD_CLEAR) ? " MD_CLEAR" : "");
Quoted 1 line
There is a patch for this issue.
Thankyou for the report. However, the patch is only half correct.
It should only be the first part, adding the extra check to avoid "None".
The check for reporting MD_CLEAR must stay as X86_FEATURE_MD_CLEAR, because this is a property in microcode which no controls, and nothing further to virtualise at Xen's level.
I.e. even with spec-ctrl=no, if the microcode is new enough, the guest gets to see the MD_CLEAR CPUID bit, because all it means is "this preexisting instruction now has a new side effect".
~Andrew
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
I will improve it soon.
thanks
James
________________________________
From: Andrew Cooper <[email protected]>
Sent: Wednesday, July 31, 2019 5:44:50 PM
To: [email protected] <[email protected]>; Jin Nan Wang <[email protected]>
Cc: [email protected] <[email protected]>; Jan Beulich <[email protected]>; [email protected] <[email protected]>
Subject: Re: [PATCH] Speculative mitigation facilities report wrong status
Quoted 77 lines · Jin Nan Wang
Diff with 'spec-ctrl=no' and without.
====================================================xen.dmesg.6.log 2019-07-31 14:59:50.223516313 +0800 renamed from xen.dmesg.5.log 2019-07-31 14:55:38.138173874 +0800 +6
-6@@ -7,7 +7,7 @@ (XEN) Xen version 4.12.0_14-1 ([email protected]) (gcc (SUSE Linux) 4.8.5) debug=n Mon Jun 17 15:08:33 UTC 2019 (XEN) Latest ChangeSet: (XEN) Bootloader: GRUB2 2.02 -(XEN) Command line: vga=gfx-1024x768x16 crashkernel=251M<4G ucode=scan console=vga,com1 loglvl=all guest_loglvl=all +(XEN) Command line: vga=gfx-1024x768x16 crashkernel=251M<4G ucode=scan spec-ctrl=no console=vga,com1 loglvl=all guest_loglvl=all (XEN) Xen image load base address: 0 (XEN) Video information: (XEN) VGA is graphics mode 1024x768, 16 bpp@@ -159,12 +159,12 @@ (XEN) Speculative mitigation facilities: (XEN) Hardware features: IBRS/IBPB STIBP L1D_FLUSH SSBD MD_CLEAR (XEN) Compiled-in support: INDIRECT_THUNK SHADOW_PAGING -(XEN) Xen settings: BTI-Thunk JMP, SPEC_CTRL: IBRS+ SSBD-, Other: IBPB L1D_FLUSH VERW +(XEN) Xen settings: BTI-Thunk JMP, SPEC_CTRL: IBRS- SSBD-, Other: (XEN) L1TF: believed vulnerable, maxphysaddr L1D 46, CPUID 46, Safe address 300000000000 -(XEN) Support for HVM VMs: MSR_SPEC_CTRL RSB EAGER_FPU MD_CLEAR -(XEN) Support for PV VMs: MSR_SPEC_CTRL RSB EAGER_FPU MD_CLEAR -(XEN) XPTI (64-bit PV only): Dom0 enabled, DomU enabled (with PCID) -(XEN) PV L1TF shadowing: Dom0 disabled, DomU enabled +(XEN) Support for HVM VMs: None MD_CLEAR +(XEN) Support for PV VMs: None MD_CLEAR +(XEN) XPTI (64-bit PV only): Dom0 disabled, DomU disabled (with PCID) +(XEN) PV L1TF shadowing: Dom0 disabled, DomU disabled (XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2) (XEN) Initializing Credit2 scheduler (XEN) load_precision_shift: 18==================================================
In "Support for HVM VMs: Support for PV VMs: " lines, Others feature is reported as "NONE",
MD_CLEARnot.code review:
xen/arch/x86/spec_ctrl.c:
99disable_common:100 opt_rsb_pv = false; 101 opt_rsb_hvm = false; 102 opt_md_clear_pv = 0; <----- they have been disable when 'spec-ctrl=no' 103 opt_md_clear_hvm = 0;104
X86_FEATURE_SC_VERW_PV,X86_FEATURE_SC_VERW_HVMwill not be enabled1070 if (
opt_md_clear_pv)
1071setup_force_cpu_cap(X86_FEATURE_SC_VERW_PV);
1072 if (opt_md_clear_pv||opt_md_clear_hvm)
1073setup_force_cpu_cap(X86_FEATURE_SC_VERW_IDLE);
1074 if (opt_md_clear_hvm&& !(caps &ARCH_CAPS_SKIP_L1DFL) && !opt_l1d_flush )
1075setup_force_cpu_cap(X86_FEATURE_SC_VERW_HVM);But when we report the status of
MD_CLEAR, we useX86_FEATURE_MD_CLEARto check. it seems not good.360 printk(" Support for HVM VMs:%s%s%s%s%s\n", 361 (boot_cpu_has(X86_FEATURE_SC_MSR_HVM) || 362 boot_cpu_has(X86_FEATURE_SC_RSB_HVM) || 363 opt_eager_fpu) ? "" : " None", 364 boot_cpu_has(X86_FEATURE_SC_MSR_HVM) ? " MSR_SPEC_CTRL" : "", 365 boot_cpu_has(X86_FEATURE_SC_RSB_HVM) ? " RSB" : "", 366 opt_eager_fpu ? " EAGER_FPU" : "", 367 ----> boot_cpu_has(X86_FEATURE_MD_CLEAR) ? " MD_CLEAR" : ""); 368 369 #endif 370 #ifdef CONFIG_PV 371 printk(" Support for PV VMs:%s%s%s%s%s\n", 372 (boot_cpu_has(X86_FEATURE_SC_MSR_PV) || 373 boot_cpu_has(X86_FEATURE_SC_RSB_PV) || 374 opt_eager_fpu) ? "" : " None", 375 boot_cpu_has(X86_FEATURE_SC_MSR_PV) ? " MSR_SPEC_CTRL" : "", 376 boot_cpu_has(X86_FEATURE_SC_RSB_PV) ? " RSB" : "", 377 opt_eager_fpu ? " EAGER_FPU" : "", 378 ----> boot_cpu_has(X86_FEATURE_MD_CLEAR) ? " MD_CLEAR" : "");
Quoted 1 line
There is a patch for this issue.
Thankyou for the report. However, the patch is only half correct.
It should only be the first part, adding the extra check to avoid "None".
The check for reporting MD_CLEAR must stay as X86_FEATURE_MD_CLEAR, because this is a property in microcode which no controls, and nothing further to virtualise at Xen's level.
I.e. even with spec-ctrl=no, if the microcode is new enough, the guest gets to see the MD_CLEAR CPUID bit, because all it means is "this preexisting instruction now has a new side effect".
~Andrew
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Hi folks,
Quoted 3 lines · Andrew Cooper
The check for reporting
MD_CLEARmust stay asX86_FEATURE_MD_CLEAR, because this is a property in microcode which no controls, and nothing further to virtualise at Xen's level.
There are two solution, which one would you like?
solution1: make sure set X86_FEATURE_SC_VERW_PV/HVM, under X86_FEATURE_MD_CLEAR exist.
~ 1084 if ( opt_md_clear_pv && boot_cpu_has(X86_FEATURE_MD_CLEAR)) 1085 setup_force_cpu_cap(X86_FEATURE_SC_VERW_PV); ~ 1086 if ( opt_md_clear_pv || opt_md_clear_hvm && boot_cpu_has(X86_FEATURE_MD_CLEAR))
1087 setup_force_cpu_cap(X86_FEATURE_SC_VERW_IDLE); ~ 1088 if ( opt_md_clear_hvm && !(caps & ARCH_CAPS_SKIP_L1DFL) && !opt_l1d_flush && boot_cpu_has(X86_FEATURE_MD_CLEAR))
1089 setup_force_cpu_cap(X86_FEATURE_SC_VERW_HVM);
Solution2:
365 #ifdef CONFIG_HVM
366 printk(" Support for HVM VMs:%s%s%s%s%s\n", 367 (boot_cpu_has(X86_FEATURE_SC_MSR_HVM) || 368 boot_cpu_has(X86_FEATURE_SC_RSB_HVM) || ~ 369 (boot_cpu_has(X86_FEATURE_MD_CLEAR) && boot_cpu_has(X86_FEATURE_SC_VERW_HVM)) ||
370 opt_eager_fpu) ? "" : " None",
371 boot_cpu_has(X86_FEATURE_SC_MSR_HVM) ? " MSR_SPEC_CTRL" : "",
372 boot_cpu_has(X86_FEATURE_SC_RSB_HVM) ? " RSB" : "",
373 opt_eager_fpu ? " EAGER_FPU" : "",
~ 374 (boot_cpu_has(X86_FEATURE_MD_CLEAR) && boot_cpu_has(X86_FEATURE_SC_VERW_HVM)) ? " MD_CLEAR" : ""); 375
376 #endif
377 #ifdef CONFIG_PV
378 printk(" Support for PV VMs:%s%s%s%s%s\n", 379 (boot_cpu_has(X86_FEATURE_SC_MSR_PV) || 380 boot_cpu_has(X86_FEATURE_SC_RSB_PV) || ~ 381 (boot_cpu_has(X86_FEATURE_MD_CLEAR) && boot_cpu_has(X86_FEATURE_SC_VERW_PV)) ||
382 opt_eager_fpu) ? "" : " None",
383 boot_cpu_has(X86_FEATURE_SC_MSR_PV) ? " MSR_SPEC_CTRL" : "",
384 boot_cpu_has(X86_FEATURE_SC_RSB_PV) ? " RSB" : "",
385 opt_eager_fpu ? " EAGER_FPU" : "",
~ 386 (boot_cpu_has(X86_FEATURE_MD_CLEAR) && boot_cpu_has(X86_FEATURE_SC_VERW_PV)) ? " MD_CLEAR" : "");
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Quoted 10 lines · Jin Nan Wang
Hi folks,
Quoted 3 lines · Andrew Cooper
The check for reporting
MD_CLEARmust stay asX86_FEATURE_MD_CLEAR, because this is a property in microcode which no controls, and nothing further to virtualise at Xen's level.There are two solution, which one would you like?
solution1: make sure set X86_FEATURE_SC_VERW_PV/HVM, under
X86_FEATURE_MD_CLEARexist.
No - this is not a solution. This causes Xen to ignore spec-ctrl=0 and use VERW itself when it was instructed not to.
The only bug here is in the printed output. In your example, with MDS-capable microcode and spec-ctrl=0 on the command line, the correct output should be
(XEN) Support for HVM VMs: MD_CLEAR
(XEN) Support for PV VMs: MD_CLEAR
The actual behaviour of Xen is correct, but the printed message is confusing.
~Andrew
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel