Allocate memmap from hotadded memory
Subsystems (15)
Oscar Salvador
maintainerv2 cover Allocate memmap from hotadded memory
Hi,
It has been while since I sent previous version [1].
In this version I added some feedback I got back then, like letting the caller decide whether he wants allocating per memory block or per memory range (patch#2), and having the chance to disable vmemmap when users want to expose all hotpluggable memory to userspace (patch#5).
[Testing]
While I could test last version on powerpc, and Huawei's fellows helped me out testing it on arm64, this time I could only test it on x86_64. The codebase is quite the same, so I would not expect surprises.
- x86_64: small and large memblocks (128MB, 1G and 2G)
- Kernel module that adds memory spanning multiple memblocks and remove that memory in a different granularity.
So far, only acpi memory hotplug uses the new flag. The other callers can be changed depending on their needs.
Of course, more testing and feedback is appreciated.
[Coverletter]
This is another step to make memory hotplug more usable. The primary goal of this patchset is to reduce memory overhead of the hot-added memory (at least for SPARSEMEM_VMEMMAP memory model). The current way we use to populate memmap (struct page array) has two main drawbacks:
a) it consumes an additional memory until the hotadded memory itself is onlined and
b) memmap might end up on a different numa node which is especially true for movable_node configuration.
a) it is a problem especially for memory hotplug based memory "ballooning" solutions when the delay between physical memory hotplug and the onlining can lead to OOM and that led to introduction of hacks like auto onlining (see 31bc3858ea3e ("memory-hotplug: add automatic onlining policy for the newly added memory")).
b) can have performance drawbacks.
Another minor case is that I have seen hot-add operations failing on archs because they were running out of order-x pages.
E.g On powerpc, in certain configurations, we use order-8 pages, and given 64KB base pagesize, that is 16MB.
If we run out of those, we just fail the operation and we cannot add more memory.
We could fallback to base pages as x86_64 does, but we can do better.
One way to mitigate all these issues is to simply allocate memmap array (which is the largest memory footprint of the physical memory hotplug) from the hot-added memory itself. SPARSEMEM_VMEMMAP memory model allows us to map any pfn range so the memory doesn't need to be online to be usable for the array. See patch 3 for more details.
This feature is only usable when CONFIG_SPARSEMEM_VMEMMAP is set.
[Overall design]:
Implementation wise we reuse vmem_altmap infrastructure to override the default allocator used by vmemap_populate. Once the memmap is allocated we need a way to mark altmap pfns used for the allocation. If MHP_MEMMAP_{DEVICE,MEMBLOCK} flag was passed, we set up the layout of the altmap structure at the beginning of __add_pages(), and then we call mark_vmemmap_pages().
The flags are either MHP_MEMMAP_DEVICE or MHP_MEMMAP_MEMBLOCK, and only differ in the way they allocate vmemmap pages within the memory blocks.
MHP_MEMMAP_MEMBLOCK:
- With this flag, we will allocate vmemmap pages in each memory block. This means that if we hot-add a range that spans multiple memory blocks, we will use the beginning of each memory block for the vmemmap pages. This strategy is good for cases where the caller wants the flexiblity to hot-remove memory in a different granularity than when it was added.
MHP_MEMMAP_DEVICE:
- With this flag, we will store all vmemmap pages at the beginning of hot-added memory.
So it is a tradeoff of flexiblity vs contigous memory. More info on the above can be found in patch#2.
Depending on which flag is passed (MHP_MEMMAP_DEVICE or MHP_MEMMAP_MEMBLOCK), mark_vmemmap_pages() gets called at a different stage.
With MHP_MEMMAP_MEMBLOCK, we call it once we have populated the sections fitting in a single memblock, while with MHP_MEMMAP_DEVICE we wait until all sections have been populated.
mark_vmemmap_pages() marks the pages as vmemmap and sets some metadata:
The current layout of the Vmemmap pages are:
[Head->refcount] : Nr sections used by this altmap
[Head->private] : Nr of vmemmap pages
[Tail->freelist] : Pointer to the head pageThis is done to easy the computation we need in some places. E.g:
Example 1)
We hot-add 1GB on x86_64 (memory block 128MB) using MHP_MEMMAP_DEVICE:
head->_refcount = 8 sectionshead->private = 4096 vmemmap pages
tail's->freelist = head
Example 2)
We hot-add 1GB on x86_64 using MHP_MEMMAP_MEMBLOCK:
[at the beginning of each memblock]head->_refcount = 1 sectionhead->private = 512 vmemmap pages
tail's->freelist = head
We have the refcount because when using MHP_MEMMAP_DEVICE, we need to know how much do we have to defer the call to vmemmap_free().
The thing is that the first pages of the hot-added range are used to create the memmap mapping, so we cannot remove those first, otherwise we would blow up when accessing the other pages.
What we do is that since when we hot-remove a memory-range, sections are being removed sequentially, we wait until we hit the last section, and then we free the hole range to vmemmap_free backwards.
We know that it is the last section because in every pass we decrease head->_refcount, and when it reaches 0, we got our last section.
We also have to be careful about those pages during online and offline operations. They are simply skipped, so online will keep them reserved and so unusable for any other purpose and offline ignores them so they do not block the offline operation.
One thing worth mention is that vmemmap pages residing in movable memory is not a show-stopper for that memory to be offlined/migrated away.
Vmemmap pages are just ignored in that case and they stick around until sections referred by those vmemmap pages are hot-removed.
[1] https://patchwork.kernel.org/cover/10875017/
Oscar Salvador (5):
drivers/base/memory: Remove unneeded check in
remove_memory_block_devices
mm,memory_hotplug: Introduce MHP_VMEMMAP_FLAGS mm,memory_hotplug: Introduce Vmemmap page helpers mm,memory_hotplug: allocate memmap from the added memory range for
sparse-vmemmap
mm,memory_hotplug: Allow userspace to enable/disable vmemmap
arch/arm64/mm/mmu.c | 5 +- arch/powerpc/mm/init_64.c | 7 ++ arch/s390/mm/init.c | 6 ++ arch/x86/mm/init_64.c | 10 +++ drivers/acpi/acpi_memhotplug.c | 2 +- drivers/base/memory.c | 41 +++++++++-- drivers/dax/kmem.c | 2 +- drivers/hv/hv_balloon.c | 2 +- drivers/s390/char/sclp_cmd.c | 2 +- drivers/xen/balloon.c | 2 +- include/linux/memory_hotplug.h | 31 ++++++++- include/linux/memremap.h | 2 +- include/linux/page-flags.h | 34 +++++++++ mm/compaction.c | 7 ++ mm/memory_hotplug.c | 152 ++++++++++++++++++++++++++++++++++------- mm/page_alloc.c | 22 +++++- mm/page_isolation.c | 14 +++- mm/sparse.c | 93 +++++++++++++++++++++++++ mm/util.c | 2 + 19 files changed, 394 insertions(+), 42 deletions(-)
Signature · 1 line
2.12.3
Oscar Salvador
maintainerPATCH v2 1/5 drivers/base/memory: Remove unneeded check in remove_memory_block_devices
remove_memory_block_devices() checks for the range to be aligned to memory_block_size_bytes, which is our current memory block size, and WARNs_ON and bails out if it is not.
This is the right to do, but we do already do that in try_remove_memory(), where remove_memory_block_devices() gets called from, and we even are more strict in try_remove_memory, since we directly BUG_ON in case the range is not properly aligned.
Since remove_memory_block_devices() is only called from try_remove_memory(), we can safely drop the check here.
To be honest, I am not sure if we should kill the system in case we cannot remove memory.
I tend to think that WARN_ON and return and error is better.
--- drivers/base/memory.c | 4 ---- 1 file changed, 4 deletions(-)
drivers/base/memory.c +0 -4
@@ -771,10 +771,6 @@ void remove_memory_block_devices(unsigned long start, unsigned long size)struct memory_block *mem;int block_id; -if (WARN_ON_ONCE (!IS_ALIGNED (start,memory_block_size_bytes ()) || - !IS_ALIGNED (size,memory_block_size_bytes ()))) -return ; -mutex_lock (&mem_sysfs_mutex);for (block_id = start_block_id; block_id != end_block_id; block_id++) { mem =find_memory_block_by_id (block_id,NULL );
Signature · 1 line
2.12.3
Re: [PATCH v2 1/5] drivers/base/memory: Remove unneeded check in remove_memory_block_devices
Quoted 9 lines · Oscar Salvador
remove_memory_block_devices()checks for the range to be aligned tomemory_block_size_bytes, which is our current memory block size, andWARNs_ONand bails out if it is not.This is the right to do, but we do already do that in
try_remove_memory(), whereremove_memory_block_devices()gets called from, and we even are more strict intry_remove_memory, since we directlyBUG_ONin case the range is not properly aligned.
Quoted 6 lines
Since
remove_memory_block_devices()is only called fromtry_remove_memory(), we can safely drop the check here.To be honest, I am not sure if we should kill the system in case we cannot remove memory.
I tend to think thatWARN_ONand return and error is better.
I failed to parse this sentence.
Quoted 12 lines
Signed-off-by Oscar Salvador <[email protected]>--- drivers/base/memory.c | 4 ---- 1 file changed, 4 deletions(-)drivers/base/memory.c +0
-0
drivers/base/memory.c void remove_memory_block_devices(unsigned long start, unsigned long size) · line 776
Quoted 10 lines
drivers/base/memory.c +0
-4@@ -771,10 +771,6 @@ void remove_memory_block_devices(unsigned long start, unsigned long size)struct memory_block *mem;int block_id; -if (WARN_ON_ONCE (!IS_ALIGNED (start,memory_block_size_bytes ()) || - !IS_ALIGNED (size,memory_block_size_bytes ()))) -return ; -mutex_lock (&mem_sysfs_mutex);for (block_id = start_block_id; block_id != end_block_id; block_id++) { mem =find_memory_block_by_id (block_id,NULL );
As I said when I introduced this, I prefer to have such duplicate checks in place in case we have dependent code splattered over different files. (especially mm/ vs. drivers/base). Such simple checks avoid to document "start and size have to be aligned to memory blocks".
If you still insist, then also remove the same sequence from create_memory_block_devices().
Signature · 3 lines
Thanks, David / dhildenb
Re: [PATCH v2 1/5] drivers/base/memory: Remove unneeded check in remove_memory_block_devices
Quoted 33 lines · David Hildenbrand
Quoted 9 lines · Oscar Salvador
remove_memory_block_devices()checks for the range to be aligned tomemory_block_size_bytes, which is our current memory block size, andWARNs_ONand bails out if it is not.This is the right to do, but we do already do that in
try_remove_memory(), whereremove_memory_block_devices()gets called from, and we even are more strict intry_remove_memory, since we directlyBUG_ONin case the range is not properly aligned.Quoted 6 lines
Since
remove_memory_block_devices()is only called fromtry_remove_memory(), we can safely drop the check here.To be honest, I am not sure if we should kill the system in case we cannot remove memory.
I tend to think thatWARN_ONand return and error is better.I failed to parse this sentence.
Quoted 14 lines
Signed-off-by Oscar Salvador <[email protected]>--- drivers/base/memory.c | 4 ---- 1 file changed, 4 deletions(-)drivers/base/memory.c +0
-0@@ -771,10 +771,6 @@ void remove_memory_block_devices(unsigned long start, unsigned long size)struct memory_block *mem;int block_id;
Quoted 13 lines
drivers/base/memory.c void remove_memory_block_devices(unsigned long start, unsigned long size) · line 776
Quoted 8 lines
drivers/base/memory.c +0
-4-if (WARN_ON_ONCE (!IS_ALIGNED (start,memory_block_size_bytes ()) || - !IS_ALIGNED (size,memory_block_size_bytes ()))) -return ; -mutex_lock (&mem_sysfs_mutex);for (block_id = start_block_id; block_id != end_block_id; block_id++) { mem =find_memory_block_by_id (block_id,NULL );As I said when I introduced this, I prefer to have such duplicate checks in place in case we have dependent code splattered over different files. (especially
mm/vs.drivers/base). Such simple checks avoid to document "start and size have to be aligned to memory blocks".
Lol, I even documented it as well. So yeah, if you're going to drop this once, also drop the one in create_memory_block_devices().
Quoted 4 lines
If you still insist, then also remove the same sequence from
create_memory_block_devices().
Signature · 3 lines
Thanks, David / dhildenb
Oscar Salvador
maintainerRe: [PATCH v2 1/5] drivers/base/memory: Remove unneeded check in remove_memory_block_devices
Quoted 48 lines · David Hildenbrand
Quoted 33 lines · David Hildenbrand
Quoted 9 lines · Oscar Salvador
remove_memory_block_devices()checks for the range to be aligned tomemory_block_size_bytes, which is our current memory block size, andWARNs_ONand bails out if it is not.This is the right to do, but we do already do that in
try_remove_memory(), whereremove_memory_block_devices()gets called from, and we even are more strict intry_remove_memory, since we directlyBUG_ONin case the range is not properly aligned.Quoted 6 lines
Since
remove_memory_block_devices()is only called fromtry_remove_memory(), we can safely drop the check here.To be honest, I am not sure if we should kill the system in case we cannot remove memory.
I tend to think thatWARN_ONand return and error is better.I failed to parse this sentence.
Quoted 14 lines
Signed-off-by Oscar Salvador <[email protected]>--- drivers/base/memory.c | 4 ---- 1 file changed, 4 deletions(-)drivers/base/memory.c +0
-0@@ -771,10 +771,6 @@ void remove_memory_block_devices(unsigned long start, unsigned long size)struct memory_block *mem;int block_id;Quoted 13 lines
drivers/base/memory.c void remove_memory_block_devices(unsigned long start, unsigned long size) · line 776
Quoted 8 lines
drivers/base/memory.c +0
-4-if (WARN_ON_ONCE (!IS_ALIGNED (start,memory_block_size_bytes ()) || - !IS_ALIGNED (size,memory_block_size_bytes ()))) -return ; -mutex_lock (&mem_sysfs_mutex);for (block_id = start_block_id; block_id != end_block_id; block_id++) { mem =find_memory_block_by_id (block_id,NULL );As I said when I introduced this, I prefer to have such duplicate checks in place in case we have dependent code splattered over different files. (especially
mm/vs.drivers/base). Such simple checks avoid to document "start and size have to be aligned to memory blocks".
Quoted 2 lines
Lol, I even documented it as well. So yeah, if you're going to drop this once, also drop the one in
create_memory_block_devices().
TBH, I would not mind sticking with it.
What sticked out the most was that in the previous check, we BUG_on while here we just print out a warning, so it seemed quite "inconsistent" to me.
And I only stumbled upon this when I was testing a kernel module that hot-removed memory in a different granularity.
Anyway, I do not really feel strong here, I can perfectly drop this patch as I would rather have the focus in the following-up patches, which are the important ones IMO.
Quoted 13 lines
Quoted 5 lines
If you still insist, then also remove the same sequence from
create_memory_block_devices().Signature · 3 lines
Thanks, David / dhildenb
Signature · 2 lines
Oscar Salvador SUSE L3
Re: [PATCH v2 1/5] drivers/base/memory: Remove unneeded check in remove_memory_block_devices
Quoted 56 lines · Oscar Salvador
Quoted 48 lines · David Hildenbrand
Quoted 33 lines · David Hildenbrand
Quoted 9 lines · Oscar Salvador
remove_memory_block_devices()checks for the range to be aligned tomemory_block_size_bytes, which is our current memory block size, andWARNs_ONand bails out if it is not.This is the right to do, but we do already do that in
try_remove_memory(), whereremove_memory_block_devices()gets called from, and we even are more strict intry_remove_memory, since we directlyBUG_ONin case the range is not properly aligned.Quoted 6 lines
Since
remove_memory_block_devices()is only called fromtry_remove_memory(), we can safely drop the check here.To be honest, I am not sure if we should kill the system in case we cannot remove memory.
I tend to think thatWARN_ONand return and error is better.I failed to parse this sentence.
Quoted 14 lines
Signed-off-by Oscar Salvador <[email protected]>--- drivers/base/memory.c | 4 ---- 1 file changed, 4 deletions(-)drivers/base/memory.c +0
-0@@ -771,10 +771,6 @@ void remove_memory_block_devices(unsigned long start, unsigned long size)struct memory_block *mem;int block_id;Quoted 13 lines
drivers/base/memory.c void remove_memory_block_devices(unsigned long start, unsigned long size) · line 776
Quoted 8 lines
drivers/base/memory.c +0
-4-if (WARN_ON_ONCE (!IS_ALIGNED (start,memory_block_size_bytes ()) || - !IS_ALIGNED (size,memory_block_size_bytes ()))) -return ; -mutex_lock (&mem_sysfs_mutex);for (block_id = start_block_id; block_id != end_block_id; block_id++) { mem =find_memory_block_by_id (block_id,NULL );As I said when I introduced this, I prefer to have such duplicate checks in place in case we have dependent code splattered over different files. (especially
mm/vs.drivers/base). Such simple checks avoid to document "start and size have to be aligned to memory blocks".Quoted 2 lines
Lol, I even documented it as well. So yeah, if you're going to drop this once, also drop the one in
create_memory_block_devices().TBH, I would not mind sticking with it.
What sticked out the most was that in the previous check, weBUG_onwhile here we just print out a warning, so it seemed quite "inconsistent" to me.
Quoted 6 lines
And I only stumbled upon this when I was testing a kernel module that hot-removed memory in a different granularity.
Anyway, I do not really feel strong here, I can perfectly drop this patch as I would rather have the focus in the following-up patches, which are the important ones IMO.
Whetever you prefer, I can live with either :)
(yes, separating this patch from the others makes sense)
Signature · 3 lines
Thanks, David / dhildenb
Oscar Salvador
maintainerPATCH v2 2/5 mm,memory_hotplug: Introduce MHP_VMEMMAP_FLAGS
In reply to Oscar SalvadorThis patch introduces MHP_MEMMAP_DEVICE and MHP_MEMMAP_MEMBLOCK flags, and prepares the callers that add memory to take a "flags" parameter. This "flags" parameter will be evaluated later on in Patch#3 to init mhp_restrictions struct.
The callers are:
add_memory__add_memoryadd_memory_resource
Unfortunately, we do not have a single entry point to add memory, as depending on the requisites of the caller, they want to hook up in different places, (e.g: Xen reserve_additional_memory()), so we have to spread the parameter in the three callers.
The flags are either MHP_MEMMAP_DEVICE or MHP_MEMMAP_MEMBLOCK, and only differ in the way they allocate vmemmap pages within the memory blocks.
MHP_MEMMAP_MEMBLOCK:
- With this flag, we will allocate vmemmap pages in each memory block. This means that if we hot-add a range that spans multiple memory blocks, we will use the beginning of each memory block for the vmemmap pages. This strategy is good for cases where the caller wants the flexiblity to hot-remove memory in a different granularity than when it was added. E.g: We allocate a range (x,y], that spans 3 memory blocks, and given memory block size = 128MB. [memblock#0 ] [0 - 511 pfns ] - vmemmaps for section#0 [512 - 32767 pfns ] - normal memory [memblock#1 ] [32768 - 33279 pfns] - vmemmaps for section#1 [33280 - 65535 pfns] - normal memory [memblock#2 ] [65536 - 66047 pfns] - vmemmap for section#2 [66048 - 98304 pfns] - normal memory
MHP_MEMMAP_DEVICE:
- With this flag, we will store all vmemmap pages at the beginning of
hot-added memory.
E.g:
We allocate a range (x,y], that spans 3 memory blocks, and given
memory block size = 128MB.
[memblock #0 ]
[0 - 1533 pfns ] - vmemmap for section#{0-2}
[1534 - 98304 pfns] - normal memoryWhen using larger memory blocks (1GB or 2GB), the principle is the same.
Of course, MHP_MEMMAP_DEVICE is nicer when it comes to have a large contigous area, while MHP_MEMMAP_MEMBLOCK allows us to have flexibility when removing the memory.
--- drivers/acpi/acpi_memhotplug.c | 2 +- drivers/base/memory.c | 2 +- drivers/dax/kmem.c | 2 +- drivers/hv/hv_balloon.c | 2 +- drivers/s390/char/sclp_cmd.c | 2 +- drivers/xen/balloon.c | 2 +- include/linux/memory_hotplug.h | 22 +++++++++++++++++++--- mm/memory_hotplug.c | 10 +++++----- 8 files changed, 30 insertions(+), 14 deletions(-)
drivers/acpi/acpi_memhotplug.c +1 -1
@@ -218,7 +218,7 @@ static int acpi_memory_enable_device(struct acpi_memory_device *mem_device)if (node <0 ) node =memory_add_physaddr_to_nid (info->start_addr); - result =__add_memory (node, info->start_addr, info->length); + result =__add_memory (node, info->start_addr, info->length,0 );/* * If the memory block has been used by the kernel, add_memory()
drivers/base/memory.c +1 -1
@@ -516,7 +516,7 @@ static ssize_t probe_store(struct device *dev, struct device_attribute *attr, nid =memory_add_physaddr_to_nid (phys_addr); ret =__add_memory (nid, phys_addr, -MIN_MEMORY_BLOCK_SIZE * sections_per_block); +MIN_MEMORY_BLOCK_SIZE * sections_per_block,0 );if (ret) goto out;
drivers/dax/kmem.c +1 -1
@@ -65,7 +65,7 @@ int dev_dax_kmem_probe(struct device *dev) new_res->flags =IORESOURCE_SYSTEM_RAM ; new_res->name =dev_name (dev); - rc =add_memory (numa_node, new_res->start,resource_size (new_res)); + rc =add_memory (numa_node, new_res->start,resource_size (new_res),0 );if (rc) {release_resource (new_res);kfree (new_res);
drivers/hv/hv_balloon.c +1 -1
@@ -731,7 +731,7 @@ static void hv_mem_hot_add(unsigned long start, unsigned long size, nid =memory_add_physaddr_to_nid (PFN_PHYS (start_pfn)); ret =add_memory (nid,PFN_PHYS ((start_pfn)), - (HA_CHUNK <<PAGE_SHIFT )); + (HA_CHUNK <<PAGE_SHIFT ),0 );if (ret) {pr_err ("hot_add memory failed error is %d\n" , ret);
drivers/s390/char/sclp_cmd.c +1 -1
@@ -406,7 +406,7 @@ static void __init add_memory_merged(u16 rn)if (!size) goto skip_add;for (addr = start; addr < start + size; addr += block_size) -add_memory (numa_pfn_to_nid (PFN_DOWN (addr)), addr, block_size); +add_memory (numa_pfn_to_nid (PFN_DOWN (addr)), addr, block_size,0 ); skip_add: first_rn = rn; num =1 ;
drivers/xen/balloon.c +1 -1
@@ -349,7 +349,7 @@ static enum bp_state reserve_additional_memory(void)mutex_unlock (&balloon_mutex);/* add_memory_resource() requires the device_hotplug lock */ lock_device_hotplug (); - rc =add_memory_resource (nid, resource); + rc =add_memory_resource (nid, resource,0 );unlock_device_hotplug ();mutex_lock (&balloon_mutex);
include/linux/memory_hotplug.h +19 -3
@@ -54,6 +54,22 @@ enum { };/* +* We want memmap (struct page array) to be allocated from the hotadded range. +* To do so, there are two possible ways depending on what the caller wants. +* 1) Allocate memmap pages per device (whole hot-added range) +* 2) Allocate memmap pages per memblock +* The former implies that we wil use the beginning of the hot-added range +* to store the memmap pages of the whole range, while the latter implies +* that we will use the beginning of each memblock to store its own memmap +* pages. +* Please note that only SPARSE_VMEMMAP implements this feature and some +* architectures might not support it even for that memory model (e.g. s390) +*/ +#define MHP_MEMMAP_DEVICE (1UL<<0) +#define MHP_MEMMAP_MEMBLOCK (1UL<<1) +#define MHP_VMEMMAP_FLAGS (MHP_MEMMAP_DEVICE|MHP_MEMMAP_MEMBLOCK) + +/* * Restrictions for the memory hotplug: * flags: MHP_ flags * altmap: alternative allocator for memmap array
@@ -342,9 +358,9 @@ static inline void __remove_memory(int nid, u64 start, u64 size) {}extern void __ref free_area_init_core_hotplug (int nid);extern int walk_memory_range (unsigned long start_pfn,unsigned long end_pfn,void *arg,int (*func)(struct memory_block *,void *)); -extern int __add_memory (int nid,u64 start,u64 size); -extern int add_memory (int nid,u64 start,u64 size); -extern int add_memory_resource (int nid,struct resource *resource); +extern int __add_memory (int nid,u64 start,u64 size,unsigned long flags); +extern int add_memory (int nid,u64 start,u64 size,unsigned long flags); +extern int add_memory_resource (int nid,struct resource *resource,unsigned long flags);extern void move_pfn_range_to_zone (struct zone *zone,unsigned long start_pfn,unsigned long nr_pages,struct vmem_altmap *altmap);extern bool is_memblock_offlined (struct memory_block *mem);
mm/memory_hotplug.c +5 -5
@@ -1057,7 +1057,7 @@ static int online_memory_block(struct memory_block *mem, void *arg)* * we are OK calling __meminit stuff here - we have CONFIG_MEMORY_HOTPLUG */ -int __ref add_memory_resource (int nid,struct resource *res) +int __ref add_memory_resource (int nid,struct resource *res,unsigned long flags) {struct mhp_restrictions restrictions = {};u64 start, size;
@@ -1135,7 +1135,7 @@ int __ref add_memory_resource(int nid, struct resource *res) }/* requires device_hotplug_lock, see add_memory_resource() */ -int __ref __add_memory (int nid,u64 start,u64 size) +int __ref __add_memory (int nid,u64 start,u64 size,unsigned long flags) {struct resource *res;int ret;
@@ -1144,18 +1144,18 @@ int __ref __add_memory(int nid, u64 start, u64 size)if (IS_ERR (res))return PTR_ERR (res); - ret =add_memory_resource (nid, res); + ret =add_memory_resource (nid, res, flags);if (ret <0 )release_memory_resource (res);return ret; } -int add_memory (int nid,u64 start,u64 size) +int add_memory (int nid,u64 start,u64 size,unsigned long flags) {int rc;lock_device_hotplug (); - rc =__add_memory (nid, start, size); + rc =__add_memory (nid, start, size, flags);unlock_device_hotplug ();return rc;
Signature · 1 line
2.12.3
Re: [PATCH v2 2/5] mm,memory_hotplug: Introduce MHP_VMEMMAP_FLAGS
Quoted 153 lines · Oscar Salvador
This patch introduces
MHP_MEMMAP_DEVICEandMHP_MEMMAP_MEMBLOCKflags, and prepares the callers that add memory to take a "flags" parameter. This "flags" parameter will be evaluated later on in Patch#3 to initmhp_restrictionsstruct.The callers are:
add_memory__add_memoryadd_memory_resourceUnfortunately, we do not have a single entry point to add memory, as depending on the requisites of the caller, they want to hook up in different places, (e.g: Xen
reserve_additional_memory()), so we have to spread the parameter in the three callers.The flags are either
MHP_MEMMAP_DEVICEorMHP_MEMMAP_MEMBLOCK, and only differ in the way they allocate vmemmap pages within the memory blocks.
MHP_MEMMAP_MEMBLOCK:- With this flag, we will allocate vmemmap pages in each memory block. This means that if we hot-add a range that spans multiple memory blocks, we will use the beginning of each memory block for the vmemmap pages. This strategy is good for cases where the caller wants the flexiblity to hot-remove memory in a different granularity than when it was added. E.g: We allocate a range (x,y], that spans 3 memory blocks, and given memory block size = 128MB. [memblock#0 ] [0 - 511 pfns ] - vmemmaps for section#0 [512 - 32767 pfns ] - normal memory [memblock#1 ] [32768 - 33279 pfns] - vmemmaps for section#1 [33280 - 65535 pfns] - normal memory [memblock#2 ] [65536 - 66047 pfns] - vmemmap for section#2 [66048 - 98304 pfns] - normal memory
MHP_MEMMAP_DEVICE:- With this flag, we will store all vmemmap pages at the beginning of hot-added memory. E.g: We allocate a range (x,y], that spans 3 memory blocks, and given memory block size = 128MB. [memblock #0 ] [0 - 1533 pfns ] - vmemmap for section#{0-2} [1534 - 98304 pfns] - normal memoryWhen using larger memory blocks (1GB or 2GB), the principle is the same.
Of course,
MHP_MEMMAP_DEVICEis nicer when it comes to have a large contigous area, whileMHP_MEMMAP_MEMBLOCKallows us to have flexibility when removing the memory.Signed-off-by Oscar Salvador <[email protected]>--- drivers/acpi/acpi_memhotplug.c | 2 +- drivers/base/memory.c | 2 +- drivers/dax/kmem.c | 2 +- drivers/hv/hv_balloon.c | 2 +- drivers/s390/char/sclp_cmd.c | 2 +- drivers/xen/balloon.c | 2 +- include/linux/memory_hotplug.h | 22 +++++++++++++++++++--- mm/memory_hotplug.c | 10 +++++----- 8 files changed, 30 insertions(+), 14 deletions(-)drivers/acpi/acpi_memhotplug.c +1
-1@@ -218,7 +218,7 @@ static int acpi_memory_enable_device(struct acpi_memory_device *mem_device)if (node <0 ) node =memory_add_physaddr_to_nid (info->start_addr); - result =__add_memory (node, info->start_addr, info->length); + result =__add_memory (node, info->start_addr, info->length,0 );/* * If the memory block has been used by the kernel, add_memory() drivers/base/memory.c +1
-1@@ -516,7 +516,7 @@ static ssize_t probe_store(struct device *dev, struct device_attribute *attr, nid =memory_add_physaddr_to_nid (phys_addr); ret =__add_memory (nid, phys_addr, -MIN_MEMORY_BLOCK_SIZE * sections_per_block); +MIN_MEMORY_BLOCK_SIZE * sections_per_block,0 );if (ret) goto out;drivers/dax/kmem.c +1
-1@@ -65,7 +65,7 @@ int dev_dax_kmem_probe(struct device *dev) new_res->flags =IORESOURCE_SYSTEM_RAM ; new_res->name =dev_name (dev); - rc =add_memory (numa_node, new_res->start,resource_size (new_res)); + rc =add_memory (numa_node, new_res->start,resource_size (new_res),0 );if (rc) {release_resource (new_res);kfree (new_res);drivers/hv/hv_balloon.c +1
-1@@ -731,7 +731,7 @@ static void hv_mem_hot_add(unsigned long start, unsigned long size, nid =memory_add_physaddr_to_nid (PFN_PHYS (start_pfn)); ret =add_memory (nid,PFN_PHYS ((start_pfn)), - (HA_CHUNK <<PAGE_SHIFT )); + (HA_CHUNK <<PAGE_SHIFT ),0 );if (ret) {pr_err ("hot_add memory failed error is %d\n" , ret);drivers/s390/char/sclp_cmd.c +1
-1@@ -406,7 +406,7 @@ static void __init add_memory_merged(u16 rn)if (!size) goto skip_add;for (addr = start; addr < start + size; addr += block_size) -add_memory (numa_pfn_to_nid (PFN_DOWN (addr)), addr, block_size); +add_memory (numa_pfn_to_nid (PFN_DOWN (addr)), addr, block_size,0 ); skip_add: first_rn = rn; num =1 ;drivers/xen/balloon.c +1
-1@@ -349,7 +349,7 @@ static enum bp_state reserve_additional_memory(void)mutex_unlock (&balloon_mutex);/* add_memory_resource() requires the device_hotplug lock */ lock_device_hotplug (); - rc =add_memory_resource (nid, resource); + rc =add_memory_resource (nid, resource,0 );unlock_device_hotplug ();mutex_lock (&balloon_mutex);include/linux/memory_hotplug.h +0
-0
include/linux/memory_hotplug.h enum { · line 61
Quoted 8 lines
include/linux/memory_hotplug.h +5
-0@@ -54,6 +54,22 @@ enum { };/* +* We want memmap (struct page array) to be allocated from the hotadded range. +* To do so, there are two possible ways depending on what the caller wants. +* 1) Allocate memmap pages per device (whole hot-added range) +* 2) Allocate memmap pages per memblock +* The former implies that we wil use the beginning of the hot-added range
s/wil/will/
include/linux/memory_hotplug.h enum { · line 66
Quoted 5 lines
include/linux/memory_hotplug.h +5
-0+* to store the memmap pages of the whole range, while the latter implies +* that we will use the beginning of each memblock to store its own memmap +* pages. +* Please note that only SPARSE_VMEMMAP implements this feature and some +* architectures might not support it even for that memory model (e.g. s390)
Probably rephrase to "This is only a hint, not a guarantee. Only selected architectures support it with SPARSE_VMEMMAP."
Quoted 57 lines
include/linux/memory_hotplug.h +9
-3+*/ +#define MHP_MEMMAP_DEVICE (1UL<<0) +#define MHP_MEMMAP_MEMBLOCK (1UL<<1) +#define MHP_VMEMMAP_FLAGS (MHP_MEMMAP_DEVICE|MHP_MEMMAP_MEMBLOCK) + +/* * Restrictions for the memory hotplug: * flags: MHP_ flags * altmap: alternative allocator for memmap array @@ -342,9 +358,9 @@ static inline void __remove_memory(int nid, u64 start, u64 size) {}extern void __ref free_area_init_core_hotplug (int nid);extern int walk_memory_range (unsigned long start_pfn,unsigned long end_pfn,void *arg,int (*func)(struct memory_block *,void *)); -extern int __add_memory (int nid,u64 start,u64 size); -extern int add_memory (int nid,u64 start,u64 size); -extern int add_memory_resource (int nid,struct resource *resource); +extern int __add_memory (int nid,u64 start,u64 size,unsigned long flags); +extern int add_memory (int nid,u64 start,u64 size,unsigned long flags); +extern int add_memory_resource (int nid,struct resource *resource,unsigned long flags);extern void move_pfn_range_to_zone (struct zone *zone,unsigned long start_pfn,unsigned long nr_pages,struct vmem_altmap *altmap);extern bool is_memblock_offlined (struct memory_block *mem);mm/memory_hotplug.c +3
-4@@ -1057,7 +1057,7 @@ static int online_memory_block(struct memory_block *mem, void *arg)* * we are OK calling __meminit stuff here - we have CONFIG_MEMORY_HOTPLUG */ -int __ref add_memory_resource (int nid,struct resource *res) +int __ref add_memory_resource (int nid,struct resource *res,unsigned long flags) {struct mhp_restrictions restrictions = {};u64 start, size;@@ -1135,7 +1135,7 @@ int __ref add_memory_resource(int nid, struct resource *res) }/* requires device_hotplug_lock, see add_memory_resource() */ -int __ref __add_memory (int nid,u64 start,u64 size) +int __ref __add_memory (int nid,u64 start,u64 size,unsigned long flags) {struct resource *res;int ret;@@ -1144,18 +1144,18 @@ int __ref __add_memory(int nid, u64 start, u64 size)if (IS_ERR (res))return PTR_ERR (res); - ret =add_memory_resource (nid, res); + ret =add_memory_resource (nid, res, flags);if (ret <0 )release_memory_resource (res);return ret; } -int add_memory (int nid,u64 start,u64 size)
mm/memory_hotplug.c int __ref __add_memory(int nid, u64 start, u64 size) · line 1161
Quoted 10 lines
mm/memory_hotplug.c +2
-1+int add_memory (int nid,u64 start,u64 size,unsigned long flags) {int rc;lock_device_hotplug (); - rc =__add_memory (nid, start, size); + rc =__add_memory (nid, start, size, flags);unlock_device_hotplug ();return rc;
Apart from that, looks good to me.
Signature · 3 lines
Thanks, David / dhildenb
Re: [PATCH v2 2/5] mm,memory_hotplug: Introduce MHP_VMEMMAP_FLAGS
In reply to Oscar SalvadorQuoted 53 lines · Oscar Salvador
This patch introduces
MHP_MEMMAP_DEVICEandMHP_MEMMAP_MEMBLOCKflags, and prepares the callers that add memory to take a "flags" parameter. This "flags" parameter will be evaluated later on in Patch#3 to initmhp_restrictionsstruct.The callers are:
add_memory__add_memoryadd_memory_resourceUnfortunately, we do not have a single entry point to add memory, as depending on the requisites of the caller, they want to hook up in different places, (e.g: Xen
reserve_additional_memory()), so we have to spread the parameter in the three callers.The flags are either
MHP_MEMMAP_DEVICEorMHP_MEMMAP_MEMBLOCK, and only differ in the way they allocate vmemmap pages within the memory blocks.
MHP_MEMMAP_MEMBLOCK:- With this flag, we will allocate vmemmap pages in each memory block. This means that if we hot-add a range that spans multiple memory blocks, we will use the beginning of each memory block for the vmemmap pages. This strategy is good for cases where the caller wants the flexiblity to hot-remove memory in a different granularity than when it was added. E.g: We allocate a range (x,y], that spans 3 memory blocks, and given memory block size = 128MB. [memblock#0 ] [0 - 511 pfns ] - vmemmaps for section#0 [512 - 32767 pfns ] - normal memory [memblock#1 ] [32768 - 33279 pfns] - vmemmaps for section#1 [33280 - 65535 pfns] - normal memory [memblock#2 ] [65536 - 66047 pfns] - vmemmap for section#2 [66048 - 98304 pfns] - normal memory
MHP_MEMMAP_DEVICE:- With this flag, we will store all vmemmap pages at the beginning of hot-added memory. E.g: We allocate a range (x,y], that spans 3 memory blocks, and given memory block size = 128MB. [memblock #0 ] [0 - 1533 pfns ] - vmemmap for section#{0-2} [1534 - 98304 pfns] - normal memory
Quoted 5 lines
When using larger memory blocks (1GB or 2GB), the principle is the same.
Of course,
MHP_MEMMAP_DEVICEis nicer when it comes to have a large contigous area, whileMHP_MEMMAP_MEMBLOCKallows us to have flexibility when removing the memory.
Concept and patch looks good to me, but I don't quite like the proliferation of the _DEVICE naming, in theory it need not necessarily be ZONE_DEVICE that is the only user of that flag. I also think it might be useful to assign a flag for the default 'allocate from RAM' case, just so the code is explicit. So, how about:
MHP_MEMMAP_PAGE_ALLOCMHP_MEMMAP_MEMBLOCKMHP_MEMMAP_RESERVED
...for the 3 cases?
Other than that, feel free to add:
[email protected]
maintainerRe: [PATCH v2 2/5] mm,memory_hotplug: Introduce MHP_VMEMMAP_FLAGS
Quoted 78 lines · Dan Williams
Quoted 61 lines · Oscar Salvador
This patch introduces
MHP_MEMMAP_DEVICEandMHP_MEMMAP_MEMBLOCKflags, and prepares the callers that add memory to take a "flags" parameter. This "flags" parameter will be evaluated later on in Patch#3 to initmhp_restrictionsstruct.The callers are:
add_memory__add_memoryadd_memory_resourceUnfortunately, we do not have a single entry point to add memory, as depending on the requisites of the caller, they want to hook up in different places, (e.g: Xen
reserve_additional_memory()), so we have to spread the parameter in the three callers.The flags are either
MHP_MEMMAP_DEVICEorMHP_MEMMAP_MEMBLOCK, and only differ in the way they allocate vmemmap pages within the memory blocks.
MHP_MEMMAP_MEMBLOCK:
- With this flag, we will allocate vmemmap pages in each
memory block.
This means that if we hot-add a range that spans multiple
memory blocks,
we will use the beginning of each memory block for the
vmemmap pages.
This strategy is good for cases where the caller wants the
flexiblity
to hot-remove memory in a different granularity than when it
was added.E.g:
We allocate a range (x,y], that spans 3 memory blocks,
and givenmemory block size = 128MB. [memblock#0 ] [0 - 511 pfns ] - vmemmaps for section#0 [512 - 32767 pfns ] - normal memory [memblock#1 ] [32768 - 33279 pfns] - vmemmaps for section#1 [33280 - 65535 pfns] - normal memory [memblock#2 ] [65536 - 66047 pfns] - vmemmap for section#2 [66048 - 98304 pfns] - normal memory
MHP_MEMMAP_DEVICE:
- With this flag, we will store all vmemmap pages at the
beginning of
hot-added memory.E.g:
We allocate a range (x,y], that spans 3 memory blocks,
and givenmemory block size = 128MB. [memblock #0 ] [0 - 1533 pfns ] - vmemmap for section#{0-2} [1534 - 98304 pfns] - normal memoryQuoted 5 lines
When using larger memory blocks (1GB or 2GB), the principle is the same.
Of course,
MHP_MEMMAP_DEVICEis nicer when it comes to have a large contigous area, whileMHP_MEMMAP_MEMBLOCKallows us to have flexibility when removing the memory.Concept and patch looks good to me, but I don't quite like the proliferation of the
_DEVICEnaming, in theory it need not necessarily beZONE_DEVICEthat is the only user of that flag. I also think it might be useful to assign a flag for the default 'allocate from RAM' case, just so the code is explicit. So, how about:
MHP_MEMMAP_PAGE_ALLOCMHP_MEMMAP_MEMBLOCKMHP_MEMMAP_RESERVED
Quoted 5 lines
...for the 3 cases?
Other than that, feel free to add:
Reviewed-by Dan Williams <[email protected]>
HI Dan,
I'll be sending V3 tomorrow, with some major rewrites (more simplified).
Thanks
Oscar Salvador
maintainerRe: [PATCH v2 2/5] mm,memory_hotplug: Introduce MHP_VMEMMAP_FLAGS
In reply to Dan WilliamsQuoted 60 lines · Dan Williams
Quoted 53 lines · Oscar Salvador
This patch introduces
MHP_MEMMAP_DEVICEandMHP_MEMMAP_MEMBLOCKflags, and prepares the callers that add memory to take a "flags" parameter. This "flags" parameter will be evaluated later on in Patch#3 to initmhp_restrictionsstruct.The callers are:
add_memory__add_memoryadd_memory_resourceUnfortunately, we do not have a single entry point to add memory, as depending on the requisites of the caller, they want to hook up in different places, (e.g: Xen
reserve_additional_memory()), so we have to spread the parameter in the three callers.The flags are either
MHP_MEMMAP_DEVICEorMHP_MEMMAP_MEMBLOCK, and only differ in the way they allocate vmemmap pages within the memory blocks.
MHP_MEMMAP_MEMBLOCK:- With this flag, we will allocate vmemmap pages in each memory block. This means that if we hot-add a range that spans multiple memory blocks, we will use the beginning of each memory block for the vmemmap pages. This strategy is good for cases where the caller wants the flexiblity to hot-remove memory in a different granularity than when it was added. E.g: We allocate a range (x,y], that spans 3 memory blocks, and given memory block size = 128MB. [memblock#0 ] [0 - 511 pfns ] - vmemmaps for section#0 [512 - 32767 pfns ] - normal memory [memblock#1 ] [32768 - 33279 pfns] - vmemmaps for section#1 [33280 - 65535 pfns] - normal memory [memblock#2 ] [65536 - 66047 pfns] - vmemmap for section#2 [66048 - 98304 pfns] - normal memory
MHP_MEMMAP_DEVICE:- With this flag, we will store all vmemmap pages at the beginning of hot-added memory. E.g: We allocate a range (x,y], that spans 3 memory blocks, and given memory block size = 128MB. [memblock #0 ] [0 - 1533 pfns ] - vmemmap for section#{0-2} [1534 - 98304 pfns] - normal memoryQuoted 5 lines
When using larger memory blocks (1GB or 2GB), the principle is the same.
Of course,
MHP_MEMMAP_DEVICEis nicer when it comes to have a large contigous area, whileMHP_MEMMAP_MEMBLOCKallows us to have flexibility when removing the memory.
Quoted 5 lines
Concept and patch looks good to me, but I don't quite like the proliferation of the
_DEVICEnaming, in theory it need not necessarily beZONE_DEVICEthat is the only user of that flag. I also think it might be useful to assign a flag for the default 'allocate from RAM' case, just so the code is explicit. So, how about:
Well, MHP_MEMMAP_DEVICE is not tied to ZONE_DEVICE. MHP_MEMMAP_DEVICE was chosen to make a difference between:
* allocate memmap pages for the whole memory-device
* allocate memmap pages on each memoryblock that this memory-device spans
Quoted 10 lines
MHP_MEMMAP_PAGE_ALLOCMHP_MEMMAP_MEMBLOCKMHP_MEMMAP_RESERVED...for the 3 cases?
Other than that, feel free to add:
Reviewed-by Dan Williams <[email protected]>
Signature · 2 lines
Oscar Salvador SUSE L3
Re: [PATCH v2 2/5] mm,memory_hotplug: Introduce MHP_VMEMMAP_FLAGS
Quoted 67 lines · Oscar Salvador
Quoted 60 lines · Dan Williams
Quoted 53 lines · Oscar Salvador
This patch introduces
MHP_MEMMAP_DEVICEandMHP_MEMMAP_MEMBLOCKflags, and prepares the callers that add memory to take a "flags" parameter. This "flags" parameter will be evaluated later on in Patch#3 to initmhp_restrictionsstruct.The callers are:
add_memory__add_memoryadd_memory_resourceUnfortunately, we do not have a single entry point to add memory, as depending on the requisites of the caller, they want to hook up in different places, (e.g: Xen
reserve_additional_memory()), so we have to spread the parameter in the three callers.The flags are either
MHP_MEMMAP_DEVICEorMHP_MEMMAP_MEMBLOCK, and only differ in the way they allocate vmemmap pages within the memory blocks.
MHP_MEMMAP_MEMBLOCK:- With this flag, we will allocate vmemmap pages in each memory block. This means that if we hot-add a range that spans multiple memory blocks, we will use the beginning of each memory block for the vmemmap pages. This strategy is good for cases where the caller wants the flexiblity to hot-remove memory in a different granularity than when it was added. E.g: We allocate a range (x,y], that spans 3 memory blocks, and given memory block size = 128MB. [memblock#0 ] [0 - 511 pfns ] - vmemmaps for section#0 [512 - 32767 pfns ] - normal memory [memblock#1 ] [32768 - 33279 pfns] - vmemmaps for section#1 [33280 - 65535 pfns] - normal memory [memblock#2 ] [65536 - 66047 pfns] - vmemmap for section#2 [66048 - 98304 pfns] - normal memory
MHP_MEMMAP_DEVICE:- With this flag, we will store all vmemmap pages at the beginning of hot-added memory. E.g: We allocate a range (x,y], that spans 3 memory blocks, and given memory block size = 128MB. [memblock #0 ] [0 - 1533 pfns ] - vmemmap for section#{0-2} [1534 - 98304 pfns] - normal memoryQuoted 5 lines
When using larger memory blocks (1GB or 2GB), the principle is the same.
Of course,
MHP_MEMMAP_DEVICEis nicer when it comes to have a large contigous area, whileMHP_MEMMAP_MEMBLOCKallows us to have flexibility when removing the memory.Quoted 5 lines
Concept and patch looks good to me, but I don't quite like the proliferation of the
_DEVICEnaming, in theory it need not necessarily beZONE_DEVICEthat is the only user of that flag. I also think it might be useful to assign a flag for the default 'allocate from RAM' case, just so the code is explicit. So, how about:
Quoted 5 lines
Well,
MHP_MEMMAP_DEVICEis not tied toZONE_DEVICE.MHP_MEMMAP_DEVICEwas chosen to make a difference between:* allocate memmap pages for the whole memory-device
* allocate memmap pages on each memoryblock that this memory-device spans
I agree that DEVICE is misleading here, you are assuming a one-to-one mapping between a device and add_memory(). You are actually taliing about "allocate a single chunk of mmap pages for the whole memory range that is added - which could consist of multiple memory blocks".
Signature · 3 lines
Thanks, David / dhildenb
Oscar Salvador
maintainerRe: [PATCH v2 2/5] mm,memory_hotplug: Introduce MHP_VMEMMAP_FLAGS
Quoted 71 lines · David Hildenbrand
Quoted 70 lines · Oscar Salvador
Quoted 60 lines · Dan Williams
Quoted 53 lines · Oscar Salvador
This patch introduces
MHP_MEMMAP_DEVICEandMHP_MEMMAP_MEMBLOCKflags, and prepares the callers that add memory to take a "flags" parameter. This "flags" parameter will be evaluated later on in Patch#3 to initmhp_restrictionsstruct.The callers are:
add_memory__add_memoryadd_memory_resourceUnfortunately, we do not have a single entry point to add memory, as depending on the requisites of the caller, they want to hook up in different places, (e.g: Xen
reserve_additional_memory()), so we have to spread the parameter in the three callers.The flags are either
MHP_MEMMAP_DEVICEorMHP_MEMMAP_MEMBLOCK, and only differ in the way they allocate vmemmap pages within the memory blocks.
MHP_MEMMAP_MEMBLOCK:- With this flag, we will allocate vmemmap pages in each memory block. This means that if we hot-add a range that spans multiple memory blocks, we will use the beginning of each memory block for the vmemmap pages. This strategy is good for cases where the caller wants the flexiblity to hot-remove memory in a different granularity than when it was added. E.g: We allocate a range (x,y], that spans 3 memory blocks, and given memory block size = 128MB. [memblock#0 ] [0 - 511 pfns ] - vmemmaps for section#0 [512 - 32767 pfns ] - normal memory [memblock#1 ] [32768 - 33279 pfns] - vmemmaps for section#1 [33280 - 65535 pfns] - normal memory [memblock#2 ] [65536 - 66047 pfns] - vmemmap for section#2 [66048 - 98304 pfns] - normal memory
MHP_MEMMAP_DEVICE:- With this flag, we will store all vmemmap pages at the beginning of hot-added memory. E.g: We allocate a range (x,y], that spans 3 memory blocks, and given memory block size = 128MB. [memblock #0 ] [0 - 1533 pfns ] - vmemmap for section#{0-2} [1534 - 98304 pfns] - normal memoryQuoted 5 lines
When using larger memory blocks (1GB or 2GB), the principle is the same.
Of course,
MHP_MEMMAP_DEVICEis nicer when it comes to have a large contigous area, whileMHP_MEMMAP_MEMBLOCKallows us to have flexibility when removing the memory.Quoted 5 lines
Concept and patch looks good to me, but I don't quite like the proliferation of the
_DEVICEnaming, in theory it need not necessarily beZONE_DEVICEthat is the only user of that flag. I also think it might be useful to assign a flag for the default 'allocate from RAM' case, just so the code is explicit. So, how about:Well,
MHP_MEMMAP_DEVICEis not tied toZONE_DEVICE.MHP_MEMMAP_DEVICEwas chosen to make a difference between:
Quoted 7 lines
Quoted 2 lines
* allocate memmap pages for the whole memory-device
* allocate memmap pages on each memoryblock that this memory-device spansI agree that DEVICE is misleading here, you are assuming a one-to-one mapping between a device and
add_memory(). You are actually taliing about "allocate a single chunk of mmap pages for the whole memory range that is added - which could consist of multiple memory blocks".
Well, I could not come up with a better name.
MHP_MEMMAP_ALL?MHP_MEMMAP_WHOLE?
I will send v3 shortly and then we can think of a better name.
Quoted 7 lines
Signature · 5 lines
-- Thanks, David / dhildenb
Signature · 2 lines
Oscar Salvador SUSE L3
Re: [PATCH v2 2/5] mm,memory_hotplug: Introduce MHP_VMEMMAP_FLAGS
Quoted 80 lines · Oscar Salvador
Quoted 71 lines · David Hildenbrand
Quoted 70 lines · Oscar Salvador
Quoted 60 lines · Dan Williams
Quoted 53 lines · Oscar Salvador
This patch introduces
MHP_MEMMAP_DEVICEandMHP_MEMMAP_MEMBLOCKflags, and prepares the callers that add memory to take a "flags" parameter. This "flags" parameter will be evaluated later on in Patch#3 to initmhp_restrictionsstruct.The callers are:
add_memory__add_memoryadd_memory_resourceUnfortunately, we do not have a single entry point to add memory, as depending on the requisites of the caller, they want to hook up in different places, (e.g: Xen
reserve_additional_memory()), so we have to spread the parameter in the three callers.The flags are either
MHP_MEMMAP_DEVICEorMHP_MEMMAP_MEMBLOCK, and only differ in the way they allocate vmemmap pages within the memory blocks.
MHP_MEMMAP_MEMBLOCK:- With this flag, we will allocate vmemmap pages in each memory block. This means that if we hot-add a range that spans multiple memory blocks, we will use the beginning of each memory block for the vmemmap pages. This strategy is good for cases where the caller wants the flexiblity to hot-remove memory in a different granularity than when it was added. E.g: We allocate a range (x,y], that spans 3 memory blocks, and given memory block size = 128MB. [memblock#0 ] [0 - 511 pfns ] - vmemmaps for section#0 [512 - 32767 pfns ] - normal memory [memblock#1 ] [32768 - 33279 pfns] - vmemmaps for section#1 [33280 - 65535 pfns] - normal memory [memblock#2 ] [65536 - 66047 pfns] - vmemmap for section#2 [66048 - 98304 pfns] - normal memory
MHP_MEMMAP_DEVICE:- With this flag, we will store all vmemmap pages at the beginning of hot-added memory. E.g: We allocate a range (x,y], that spans 3 memory blocks, and given memory block size = 128MB. [memblock #0 ] [0 - 1533 pfns ] - vmemmap for section#{0-2} [1534 - 98304 pfns] - normal memoryQuoted 5 lines
When using larger memory blocks (1GB or 2GB), the principle is the same.
Of course,
MHP_MEMMAP_DEVICEis nicer when it comes to have a large contigous area, whileMHP_MEMMAP_MEMBLOCKallows us to have flexibility when removing the memory.Quoted 5 lines
Concept and patch looks good to me, but I don't quite like the proliferation of the
_DEVICEnaming, in theory it need not necessarily beZONE_DEVICEthat is the only user of that flag. I also think it might be useful to assign a flag for the default 'allocate from RAM' case, just so the code is explicit. So, how about:Well,
MHP_MEMMAP_DEVICEis not tied toZONE_DEVICE.MHP_MEMMAP_DEVICEwas chosen to make a difference between:Quoted 7 lines
Quoted 2 lines
* allocate memmap pages for the whole memory-device
* allocate memmap pages on each memoryblock that this memory-device spansI agree that DEVICE is misleading here, you are assuming a one-to-one mapping between a device and
add_memory(). You are actually taliing about "allocate a single chunk of mmap pages for the whole memory range that is added - which could consist of multiple memory blocks".
Quoted 4 lines
Well, I could not come up with a better name.
MHP_MEMMAP_ALL?MHP_MEMMAP_WHOLE?
As I said somewhere already (as far as I recall), one mode would be sufficient. If you want per memblock, add the memory in memblock granularity.
So having a MHP_MEMMAP_ON_MEMORY that allocates it in one chunk would be sufficient for the current use cases (DIMMs, Hyper-V).
MHP_MEMMAP_ON_MEMORY: Allocate the memmap for the added memory in one chunk from the beginning of the added memory. This piece of memory will be accessed and used even before the memory is onlined.
Of course, if we want to make it configurable (e.g., for ACPI) it would be a different story. But for now this isn't really needed as far as I can tell.
Signature · 3 lines
Thanks, David / dhildenb
Oscar Salvador
maintainerRe: [PATCH v2 2/5] mm,memory_hotplug: Introduce MHP_VMEMMAP_FLAGS
Quoted 10 lines · David Hildenbrand
As I said somewhere already (as far as I recall), one mode would be sufficient. If you want per memblock, add the memory in memblock granularity.
So having a
MHP_MEMMAP_ON_MEMORYthat allocates it in one chunk would be sufficient for the current use cases (DIMMs, Hyper-V).
MHP_MEMMAP_ON_MEMORY: Allocate the memmap for the added memory in one chunk from the beginning of the added memory. This piece of memory will be accessed and used even before the memory is onlined.
This is what I had in my early versions of the patchset, but I do remember that Michal suggested to let the caller specify if it wants the memmaps to be allocated per memblock, or per whole-range.
I still think it makes somse sense, you can just pass a large chunk (spanning multiple memory-blocks) at once and yet specify to allocate it per memory-blocks.
Of course, I also agree that having only one mode would ease things (not that much as v3 does not suppose that difference wrt. range vs memory-block).
Signature · 2 lines
Oscar Salvador SUSE L3
Re: [PATCH v2 2/5] mm,memory_hotplug: Introduce MHP_VMEMMAP_FLAGS
Quoted 16 lines · Oscar Salvador
Quoted 10 lines · David Hildenbrand
As I said somewhere already (as far as I recall), one mode would be sufficient. If you want per memblock, add the memory in memblock granularity.
So having a
MHP_MEMMAP_ON_MEMORYthat allocates it in one chunk would be sufficient for the current use cases (DIMMs, Hyper-V).
MHP_MEMMAP_ON_MEMORY: Allocate the memmap for the added memory in one chunk from the beginning of the added memory. This piece of memory will be accessed and used even before the memory is onlined.This is what I had in my early versions of the patchset, but I do remember that Michal suggested to let the caller specify if it wants the memmaps to be allocated per memblock, or per whole-range.
Quoted 7 lines
I still think it makes somse sense, you can just pass a large chunk (spanning multiple memory-blocks) at once and yet specify to allocate it per memory-blocks.
Of course, I also agree that having only one mode would ease things (not that much as v3 does not suppose that difference wrt. range vs memory-block).
I prefer simplicity. No user, no implementation. We can easily add this later on if there is a good reason/user.
Signature · 3 lines
Thanks, David / dhildenb
Oscar Salvador
maintainerPATCH v2 3/5 mm,memory_hotplug: Introduce Vmemmap page helpers
In reply to Oscar SalvadorIntroduce a set of functions for Vmemmap pages.
Set of functions:
- {Set,Clear,Check} Vmemmap flag
- Given a vmemmap page, get its vmemmap-head
- Get #nr of vmemmap pages taking into account the current position of the page
These functions will be used for the code handling Vmemmap pages.
--- include/linux/page-flags.h | 34 ++++++++++++++++++++++++++++++++++ mm/util.c | 2 ++ 2 files changed, 36 insertions(+)
include/linux/page-flags.h +34 -0
@@ -466,6 +466,40 @@ static __always_inline int __PageMovable(struct page *page)PAGE_MAPPING_MOVABLE ; } +#define VMEMMAP_PAGE (~PAGE_MAPPING_FLAGS) +static __always_inline int PageVmemmap(struct page *page) +{ +return PageReserved (page) && (unsigned long )page->mapping ==VMEMMAP_PAGE ; +} + +static __always_inline int __PageVmemmap(struct page *page) +{ +return (unsigned long )page->mapping ==VMEMMAP_PAGE ; +} + +static __always_inline void __ClearPageVmemmap(struct page *page) +{ +__ClearPageReserved (page); + page->mapping =NULL ; +} + +static __always_inline void __SetPageVmemmap(struct page *page) +{ +__SetPageReserved (page); + page->mapping = (void *)VMEMMAP_PAGE ; +} + +static __always_inline struct page *vmemmap_get_head(struct page *page) +{ +return (struct page *)page->freelist; +} + +static __always_inline unsigned long get_nr_vmemmap_pages (struct page *page) +{ +struct page *head =vmemmap_get_head (page); +return head->private - (page - head); +} +#ifdef CONFIG_KSM /* * A KSM page is one of those write-protected "shared pages" or "merged pages"
mm/util.c +2 -0
@@ -607,6 +607,8 @@ struct address_space *page_mapping(struct page *page) mapping = page->mapping;if ((unsigned long )mapping &PAGE_MAPPING_ANON )return NULL ; +if ((unsigned long )mapping ==VMEMMAP_PAGE ) +return NULL ;return (void *)((unsigned long )mapping & ~PAGE_MAPPING_FLAGS ); }
Signature · 1 line
2.12.3
Re: [PATCH v2 3/5] mm,memory_hotplug: Introduce Vmemmap page helpers
Quoted 27 lines · Oscar Salvador
Introduce a set of functions for Vmemmap pages.
Set of functions:- {Set,Clear,Check} Vmemmap flag
- Given a vmemmap page, get its vmemmap-head
- Get #nr of vmemmap pages taking into account the current position of the pageThese functions will be used for the code handling Vmemmap pages.
Signed-off-by Oscar Salvador <[email protected]>--- include/linux/page-flags.h | 34 ++++++++++++++++++++++++++++++++++ mm/util.c | 2 ++ 2 files changed, 36 insertions(+)include/linux/page-flags.h +3
-0@@ -466,6 +466,40 @@ static __always_inline int __PageMovable(struct page *page)PAGE_MAPPING_MOVABLE ; } +#define VMEMMAP_PAGE (~PAGE_MAPPING_FLAGS) +static __always_inline int PageVmemmap(struct page *page) +{
include/linux/page-flags.h static __always_inline int __PageMovable(struct page *page) · line 481
Quoted 10 lines
include/linux/page-flags.h +10
-0+return PageReserved (page) && (unsigned long )page->mapping ==VMEMMAP_PAGE ; +} + +static __always_inline int __PageVmemmap(struct page *page) +{ +return (unsigned long )page->mapping ==VMEMMAP_PAGE ; +} + +static __always_inline void __ClearPageVmemmap(struct page *page) +{
Should we VM_BUG_ON in case !PG_reserved || pg->mapping != VMEMMAP_PAGE ?
include/linux/page-flags.h static __always_inline int __PageMovable(struct page *page) · line 487
Quoted 6 lines
include/linux/page-flags.h +6
-0+__ClearPageReserved (page); + page->mapping =NULL ; +} + +static __always_inline void __SetPageVmemmap(struct page *page) +{
Should we VM_BUG_ON in case PG_reserved || pg->mapping != NULL ?
include/linux/page-flags.h static __always_inline int __PageMovable(struct page *page) · line 494
Quoted 7 lines
include/linux/page-flags.h +7
-0+__SetPageReserved (page); + page->mapping = (void *)VMEMMAP_PAGE ; +} + +static __always_inline struct page *vmemmap_get_head(struct page *page) +{ +return (struct page *)page->freelist;
freelist is a "slab, slob and slub" concept (reading include/linux/mm_types.h). page->mapping is a "Page cache and anonymous pages" concept. Hmmm...
Quoted 17 lines
include/linux/page-flags.h +8
-0+} + +static __always_inline unsigned long get_nr_vmemmap_pages (struct page *page) +{ +struct page *head =vmemmap_get_head (page); +return head->private - (page - head); +} +#ifdef CONFIG_KSM /* * A KSM page is one of those write-protected "shared pages" or "merged pages" mm/util.c +0
-0
mm/util.c struct address_space *page_mapping(struct page *page) · line 614
Quoted 8 lines
mm/util.c +2
-0@@ -607,6 +607,8 @@ struct address_space *page_mapping(struct page *page) mapping = page->mapping;if ((unsigned long )mapping &PAGE_MAPPING_ANON )return NULL ; +if ((unsigned long )mapping ==VMEMMAP_PAGE ) +return NULL ;return (void *)((unsigned long )mapping & ~PAGE_MAPPING_FLAGS ); }
I wonder if using a page type would be appropriate here instead. Then, define a new sub-structure within "struct page" that describes what you actually want (instead of reusing ->private and ->mapping). Just an idea, we have to find out if that is possible.
vmemmap_get_head() smells like __GFP_COMP, but of course, these vmemmap pages never saw the buddy. But sounds like you want a similar concept.
Signature · 3 lines
Thanks, David / dhildenb
Oscar Salvador
maintainerRe: [PATCH v2 3/5] mm,memory_hotplug: Introduce Vmemmap page helpers
Quoted 4 lines · David Hildenbrand
Review
Quoted 2 lines
(quoted diff) +2
-0+static __always_inline void __ClearPageVmemmap(struct page *page) +{Should we
VM_BUG_ONin case !PG_reserved ||pg->mapping!=VMEMMAP_PAGE?
We can do that, just for extra protection.
Quoted 9 lines
include/linux/page-flags.h static __always_inline int __PageMovable(struct page *page) · line 487
Quoted 7 lines
include/linux/page-flags.h +6
-0+__ClearPageReserved (page); + page->mapping =NULL ; +} + +static __always_inline void __SetPageVmemmap(struct page *page) +{Should we
VM_BUG_ONin casePG_reserved||pg->mapping!= NULL ?
ditto.
Quoted 12 lines
include/linux/page-flags.h static __always_inline int __PageMovable(struct page *page) · line 494
Quoted 8 lines
include/linux/page-flags.h +7
-0+__SetPageReserved (page); + page->mapping = (void *)VMEMMAP_PAGE ; +} + +static __always_inline struct page *vmemmap_get_head(struct page *page) +{ +return (struct page *)page->freelist;freelist is a "slab, slob and slub" concept (reading
include/linux/mm_types.h).page->mappingis a "Page cache and anonymous pages" concept. Hmmm...
Yeah.
In an early stage, I thought about constructing vmemmap pages the same way we construct compound pages, so we can leverage the APIs that we already have.
For some reason I did not go further with that, but I will investigate in that direction.
Quoted 7 lines
I wonder if using a page type would be appropriate here instead. Then, define a new sub-structure within "struct page" that describes what you actually want (instead of reusing ->private and ->mapping). Just an idea, we have to find out if that is possible.
vmemmap_get_head()smells like__GFP_COMP, but of course, these vmemmap pages never saw the buddy. But sounds like you want a similar concept.
Thanks for the feedback.
I will take a look at it.
Signature · 2 lines
Oscar Salvador SUSE L3
Oscar Salvador
maintainerPATCH v2 4/5 mm,memory_hotplug: allocate memmap from the added memory range for sparse-vmemmap
In reply to Oscar SalvadorPhysical memory hotadd has to allocate a memmap (struct page array) for the newly added memory section. Currently, alloc_pages_node() is used for those allocations.
This has some disadvantages:
a) an existing memory is consumed for that purpose
(~2MB per 128MB memory section on x86_64)
b) if the whole node is movable then we have off-node struct pages which has performance drawbacks.
a) has turned out to be a problem for memory hotplug based ballooning because the userspace might not react in time to online memory while the memory consumed during physical hotadd consumes enough memory to push system to OOM. 31bc3858ea3e ("memory-hotplug: add automatic onlining policy for the newly added memory") has been added to workaround that problem.
I have also seen hot-add operations failing on powerpc due to the fact that we try to use order-8 pages. If the base page size is 64KB, this gives us 16MB, and if we run out of those, we simply fail. One could arge that we can fall back to basepages as we do in x86_64, but we can do better when CONFIG_SPARSEMEM_VMEMMAP is enabled.
Vmemap page tables can map arbitrary memory.
That means that we can simply use the beginning of each memory section and map struct pages there.
struct pages which back the allocated space then just need to be treated carefully.
Implementation wise we reuse vmem_altmap infrastructure to override the default allocator used by __vmemap_populate. Once the memmap is allocated we need a way to mark altmap pfns used for the allocation. If MHP_MEMMAP_{DEVICE,MEMBLOCK} flag was passed, we set up the layout of the altmap structure at the beginning of __add_pages(), and then we call mark_vmemmap_pages().
Depending on which flag is passed (MHP_MEMMAP_DEVICE or MHP_MEMMAP_MEMBLOCK), mark_vmemmap_pages() gets called at a different stage.
With MHP_MEMMAP_MEMBLOCK, we call it once we have populated the sections fitting in a single memblock, while with MHP_MEMMAP_DEVICE we wait until all sections have been populated.
mark_vmemmap_pages() marks the pages as vmemmap and sets some metadata:
The current layout of the Vmemmap pages are:
[Head->refcount] : Nr sections used by this altmap [Head->private] : Nr of vmemmap pages [Tail->freelist] : Pointer to the head page
This is done to easy the computation we need in some places. E.g:
Example 1)
We hot-add 1GB on x86_64 (memory block 128MB) using MHP_MEMMAP_DEVICE:
head->_refcount = 8 sectionshead->private = 4096 vmemmap pages
tail's->freelist = head
Example 2)
We hot-add 1GB on x86_64 using MHP_MEMMAP_MEMBLOCK:
[at the beginning of each memblock]head->_refcount = 1 sectionhead->private = 512 vmemmap pages
tail's->freelist = head
We have the refcount because when using MHP_MEMMAP_DEVICE, we need to know how much do we have to defer the call to vmemmap_free().
The thing is that the first pages of the hot-added range are used to create the memmap mapping, so we cannot remove those first, otherwise we would blow up when accessing the other pages.
What we do is that since when we hot-remove a memory-range, sections are being removed sequentially, we wait until we hit the last section, and then we free the hole range to vmemmap_free backwards.
We know that it is the last section because in every pass we decrease head->_refcount, and when it reaches 0, we got our last section.
We also have to be careful about those pages during online and offline operations. They are simply skipped, so online will keep them reserved and so unusable for any other purpose and offline ignores them so they do not block the offline operation.
In offline operation we only have to check for one particularity. Depending on how large was the hot-added range, and using MHP_MEMMAP_DEVICE, can be that one or more than one memory block is filled with only vmemmap pages. We just need to check for this case and skip 1) isolating 2) migrating, because those pages do not need to be migrated anywhere, they are self-hosted.
--- arch/arm64/mm/mmu.c | 5 +- arch/powerpc/mm/init_64.c | 7 +++ arch/s390/mm/init.c | 6 ++ arch/x86/mm/init_64.c | 10 +++ drivers/acpi/acpi_memhotplug.c | 2 +- drivers/base/memory.c | 2 +- include/linux/memory_hotplug.h | 6 ++ include/linux/memremap.h | 2 +- mm/compaction.c | 7 +++ mm/memory_hotplug.c | 138 +++++++++++++++++++++++++++++++++++------ mm/page_alloc.c | 22 ++++++- mm/page_isolation.c | 14 ++++- mm/sparse.c | 93 +++++++++++++++++++++++++++ 13 files changed, 289 insertions(+), 25 deletions(-)
arch/arm64/mm/mmu.c +4 -1
@@ -765,7 +765,10 @@ int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node,if (pmd_none (READ_ONCE (*pmdp))) {void *p =NULL ; - p =vmemmap_alloc_block_buf (PMD_SIZE , node); +if (altmap) + p =altmap_alloc_block_buf (PMD_SIZE , altmap); +else + p =vmemmap_alloc_block_buf (PMD_SIZE , node);if (!p)return -ENOMEM ;
arch/powerpc/mm/init_64.c +7 -0
@@ -289,6 +289,13 @@ void __ref vmemmap_free(unsigned long start, unsigned long end,if (base_pfn >= alt_start && base_pfn < alt_end) {vmem_altmap_free (altmap, nr_pages); + }else if (PageVmemmap (page)) { +/* +* runtime vmemmap pages are residing inside the memory +* section so they do not have to be freed anywhere. +*/ +while (PageVmemmap (page)) +__ClearPageVmemmap (page++); }else if (PageReserved (page)) {/* allocated from bootmem */ if (page_size <PAGE_SIZE ) {
arch/s390/mm/init.c +6 -0
@@ -226,6 +226,12 @@ int arch_add_memory(int nid, u64 start, u64 size,unsigned long size_pages =PFN_DOWN (size);int rc; +/* +* Physical memory is added only later during the memory online so we +* cannot use the added range at this stage unfortunately. +*/ + restrictions->flags &= ~restrictions->flags; +if (WARN_ON_ONCE (restrictions->altmap))return -EINVAL ;
arch/x86/mm/init_64.c +10 -0
@@ -874,6 +874,16 @@ static void __meminit free_pagetable(struct page *page, int order)unsigned long magic;unsigned int nr_pages =1 << order; +/* +* Runtime vmemmap pages are residing inside the memory section so +* they do not have to be freed anywhere. +*/ +if (PageVmemmap (page)) { +while (nr_pages--) +__ClearPageVmemmap (page++); +return ; + } +/* bootmem page has reserved flag */ if (PageReserved (page)) {__ClearPageReserved (page);
drivers/acpi/acpi_memhotplug.c +1 -1
@@ -218,7 +218,7 @@ static int acpi_memory_enable_device(struct acpi_memory_device *mem_device)if (node <0 ) node =memory_add_physaddr_to_nid (info->start_addr); - result =__add_memory (node, info->start_addr, info->length,0 ); + result =__add_memory (node, info->start_addr, info->length,MHP_MEMMAP_DEVICE );/* * If the memory block has been used by the kernel, add_memory()
drivers/base/memory.c +1 -1
@@ -32,7 +32,7 @@ static DEFINE_MUTEX(mem_sysfs_mutex);#define to_memory_block (dev) container_of(dev, struct memory_block, dev) -static int sections_per_block; +int sections_per_block;static inline int base_memory_block_id (int section_nr) {
include/linux/memory_hotplug.h +6 -0
@@ -375,4 +375,10 @@ extern bool allow_online_pfn_range(int nid, unsigned long pfn, unsigned long nr_ int online_type);extern struct zone *zone_for_pfn_range (int online_type,int nid,unsigned start_pfn,unsigned long nr_pages); + +#ifdef CONFIG_SPARSEMEM_VMEMMAP +extern void mark_vmemmap_pages (struct vmem_altmap *self); +#else +static inline void mark_vmemmap_pages (struct vmem_altmap *self) {} +#endif #endif /* __LINUX_MEMORY_HOTPLUG_H */
include/linux/memremap.h +1 -1
@@ -16,7 +16,7 @@ struct device;* @alloc: track pages consumed, private to vmemmap_populate() */ struct vmem_altmap { -const unsigned long base_pfn; +unsigned long base_pfn;const unsigned long reserve;unsigned long free;unsigned long align;
mm/compaction.c +7 -0
@@ -855,6 +855,13 @@ isolate_migratepages_block(struct compact_control *cc, unsigned long low_pfn, nr_scanned++; page =pfn_to_page (low_pfn); +/* +* Vmemmap pages do not need to be isolated. +*/ +if (PageVmemmap (page)) { + low_pfn +=get_nr_vmemmap_pages (page) -1 ; +continue ; + }/* * Check if the pageblock has already been marked skipped.
mm/memory_hotplug.c +120 -18
247 lines not on this page · raw message
mm/page_alloc.c +20 -2
@@ -1282,9 +1282,14 @@ static void free_one_page(struct zone *zone,static void __meminit __init_single_page (struct page *page,unsigned long pfn,unsigned long zone,int nid) { -mm_zero_struct_page (page); +if (!__PageVmemmap (page)) { +/* +* Vmemmap pages need to preserve their state. +*/ +mm_zero_struct_page (page); +init_page_count (page); + }set_page_links (page, zone, nid, pfn); -init_page_count (page);page_mapcount_reset (page);page_cpupid_reset_last (page);page_kasan_tag_reset (page);
@@ -8143,6 +8148,14 @@ bool has_unmovable_pages(struct zone *zone, struct page *page, int count, page =pfn_to_page (check); +/* +* Vmemmap pages are not needed to be moved around. +*/ +if (PageVmemmap (page)) { + iter +=get_nr_vmemmap_pages (page) -1 ; +continue ; + } +if (PageReserved (page)) goto unmovable;
@@ -8510,6 +8523,11 @@ __offline_isolated_pages(unsigned long start_pfn, unsigned long end_pfn)continue ; } page =pfn_to_page (pfn); + +if (PageVmemmap (page)) { + pfn +=get_nr_vmemmap_pages (page); +continue ; + }/* * The HWPoisoned page may be not in buddy system, and * page_count() is not 0.
mm/page_isolation.c +13 -1
@@ -146,7 +146,7 @@ static void unset_migratetype_isolate(struct page *page, unsigned migratetype)static inline struct page *__first_valid_page (unsigned long pfn,unsigned long nr_pages) { -int i; +unsigned long i;for (i =0 ; i < nr_pages; i++) {struct page *page;
@@ -154,6 +154,10 @@ __first_valid_page(unsigned long pfn, unsigned long nr_pages) page =pfn_to_online_page (pfn + i);if (!page)continue ; +if (PageVmemmap (page)) { + i +=get_nr_vmemmap_pages (page) -1 ; +continue ; + }return page; }return NULL ;
@@ -268,6 +272,14 @@ __test_page_isolated_in_pageblock(unsigned long pfn, unsigned long end_pfn,continue ; } page =pfn_to_page (pfn); +/* +* Vmemmap pages are not isolated. Skip them. +*/ +if (PageVmemmap (page)) { + pfn +=get_nr_vmemmap_pages (page); +continue ; + } +if (PageBuddy (page))/* * If the page is on a free list, it has to be on
mm/sparse.c +93 -0
105 lines not on this page · raw message
Signature · 1 line
2.12.3
Re: [PATCH v2 4/5] mm,memory_hotplug: allocate memmap from the added memory range for sparse-vmemmap
Quoted 36 lines · Oscar Salvador
Physical memory hotadd has to allocate a memmap (struct page array) for the newly added memory section. Currently,
alloc_pages_node()is used for those allocations.This has some disadvantages:
a) an existing memory is consumed for that purpose(~2MB per 128MB memory section on x86_64)b) if the whole node is movable then we have off-node struct pages which has performance drawbacks.
a) has turned out to be a problem for memory hotplug based ballooning because the userspace might not react in time to online memory while the memory consumed during physical hotadd consumes enough memory to push system to OOM.
31bc3858ea3e("memory-hotplug: add automatic onlining policy for the newly added memory") has been added to workaround that problem.I have also seen hot-add operations failing on powerpc due to the fact that we try to use order-8 pages. If the base page size is 64KB, this gives us 16MB, and if we run out of those, we simply fail. One could arge that we can fall back to basepages as we do in
x86_64, but we can do better whenCONFIG_SPARSEMEM_VMEMMAPis enabled.Vmemap page tables can map arbitrary memory.
That means that we can simply use the beginning of each memory section and map struct pages there.
struct pages which back the allocated space then just need to be treated carefully.Implementation wise we reuse
vmem_altmapinfrastructure to override the default allocator used by__vmemap_populate. Once the memmap is allocated we need a way to mark altmap pfns used for the allocation. If MHP_MEMMAP_{DEVICE,MEMBLOCK} flag was passed, we set up the layout of the altmap structure at the beginning of__add_pages(), and then we callmark_vmemmap_pages().
Quoted 5 lines
Depending on which flag is passed (
MHP_MEMMAP_DEVICEorMHP_MEMMAP_MEMBLOCK),mark_vmemmap_pages()gets called at a different stage.
WithMHP_MEMMAP_MEMBLOCK, we call it once we have populated the sections fitting in a single memblock, while withMHP_MEMMAP_DEVICEwe wait until all sections have been populated.
So, only MHP_MEMMAP_DEVICE will be used. Would it make sense to only implement one for now (after we decide which one to use), to make things simpler?
Or do you have a real user in mind for the other?
Quoted 677 lines
mark_vmemmap_pages()marks the pages as vmemmap and sets some metadata:The current layout of the Vmemmap pages are:
[Head->refcount] : Nr sections used by this altmap [Head->private] : Nr of vmemmap pages [Tail->freelist] : Pointer to the head pageThis is done to easy the computation we need in some places. E.g:
Example 1)
We hot-add 1GB onx86_64(memory block 128MB) usingMHP_MEMMAP_DEVICE:
head->_refcount= 8 sectionshead->private= 4096 vmemmap pages
tail's->freelist = headExample 2)
We hot-add 1GB onx86_64usingMHP_MEMMAP_MEMBLOCK:[at the beginning of each memblock]
head->_refcount= 1 sectionhead->private= 512 vmemmap pages
tail's->freelist = headWe have the refcount because when using
MHP_MEMMAP_DEVICE, we need to know how much do we have to defer the call tovmemmap_free().
The thing is that the first pages of the hot-added range are used to create the memmap mapping, so we cannot remove those first, otherwise we would blow up when accessing the other pages.What we do is that since when we hot-remove a memory-range, sections are being removed sequentially, we wait until we hit the last section, and then we free the hole range to
vmemmap_freebackwards.
We know that it is the last section because in every pass we decreasehead->_refcount, and when it reaches 0, we got our last section.We also have to be careful about those pages during online and offline operations. They are simply skipped, so online will keep them reserved and so unusable for any other purpose and offline ignores them so they do not block the offline operation.
In offline operation we only have to check for one particularity. Depending on how large was the hot-added range, and using
MHP_MEMMAP_DEVICE, can be that one or more than one memory block is filled with only vmemmap pages. We just need to check for this case and skip 1) isolating 2) migrating, because those pages do not need to be migrated anywhere, they are self-hosted.Signed-off-by Oscar Salvador <[email protected]>--- arch/arm64/mm/mmu.c | 5 +- arch/powerpc/mm/init_64.c | 7 +++ arch/s390/mm/init.c | 6 ++ arch/x86/mm/init_64.c | 10 +++ drivers/acpi/acpi_memhotplug.c | 2 +- drivers/base/memory.c | 2 +- include/linux/memory_hotplug.h | 6 ++ include/linux/memremap.h | 2 +- mm/compaction.c | 7 +++ mm/memory_hotplug.c | 138 +++++++++++++++++++++++++++++++++++------ mm/page_alloc.c | 22 ++++++- mm/page_isolation.c | 14 ++++- mm/sparse.c | 93 +++++++++++++++++++++++++++ 13 files changed, 289 insertions(+), 25 deletions(-)arch/arm64/mm/mmu.c +4
-1@@ -765,7 +765,10 @@ int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node,if (pmd_none (READ_ONCE (*pmdp))) {void *p =NULL ; - p =vmemmap_alloc_block_buf (PMD_SIZE , node); +if (altmap) + p =altmap_alloc_block_buf (PMD_SIZE , altmap); +else + p =vmemmap_alloc_block_buf (PMD_SIZE , node);if (!p)return -ENOMEM ;arch/powerpc/mm/init_64.c +7
-0@@ -289,6 +289,13 @@ void __ref vmemmap_free(unsigned long start, unsigned long end,if (base_pfn >= alt_start && base_pfn < alt_end) {vmem_altmap_free (altmap, nr_pages); + }else if (PageVmemmap (page)) { +/* +* runtime vmemmap pages are residing inside the memory +* section so they do not have to be freed anywhere. +*/ +while (PageVmemmap (page)) +__ClearPageVmemmap (page++); }else if (PageReserved (page)) {/* allocated from bootmem */ if (page_size <PAGE_SIZE ) {arch/s390/mm/init.c +6
-0@@ -226,6 +226,12 @@ int arch_add_memory(int nid, u64 start, u64 size,unsigned long size_pages =PFN_DOWN (size);int rc; +/* +* Physical memory is added only later during the memory online so we +* cannot use the added range at this stage unfortunately. +*/ + restrictions->flags &= ~restrictions->flags; +if (WARN_ON_ONCE (restrictions->altmap))return -EINVAL ;arch/x86/mm/init_64.c +10
-0@@ -874,6 +874,16 @@ static void __meminit free_pagetable(struct page *page, int order)unsigned long magic;unsigned int nr_pages =1 << order; +/* +* Runtime vmemmap pages are residing inside the memory section so +* they do not have to be freed anywhere. +*/ +if (PageVmemmap (page)) { +while (nr_pages--) +__ClearPageVmemmap (page++); +return ; + } +/* bootmem page has reserved flag */ if (PageReserved (page)) {__ClearPageReserved (page);drivers/acpi/acpi_memhotplug.c +1
-1@@ -218,7 +218,7 @@ static int acpi_memory_enable_device(struct acpi_memory_device *mem_device)if (node <0 ) node =memory_add_physaddr_to_nid (info->start_addr); - result =__add_memory (node, info->start_addr, info->length,0 ); + result =__add_memory (node, info->start_addr, info->length,MHP_MEMMAP_DEVICE );/* * If the memory block has been used by the kernel, add_memory() drivers/base/memory.c +1
-1@@ -32,7 +32,7 @@ static DEFINE_MUTEX(mem_sysfs_mutex);#define to_memory_block (dev) container_of(dev, struct memory_block, dev) -static int sections_per_block; +int sections_per_block;static inline int base_memory_block_id (int section_nr) {include/linux/memory_hotplug.h +6
-0@@ -375,4 +375,10 @@ extern bool allow_online_pfn_range(int nid, unsigned long pfn, unsigned long nr_ int online_type);extern struct zone *zone_for_pfn_range (int online_type,int nid,unsigned start_pfn,unsigned long nr_pages); + +#ifdef CONFIG_SPARSEMEM_VMEMMAP +extern void mark_vmemmap_pages (struct vmem_altmap *self); +#else +static inline void mark_vmemmap_pages (struct vmem_altmap *self) {} +#endif #endif /* __LINUX_MEMORY_HOTPLUG_H */ include/linux/memremap.h +1
-1@@ -16,7 +16,7 @@ struct device;* @alloc: track pages consumed, private to vmemmap_populate() */ struct vmem_altmap { -const unsigned long base_pfn; +unsigned long base_pfn;const unsigned long reserve;unsigned long free;unsigned long align;mm/compaction.c +7
-0@@ -855,6 +855,13 @@ isolate_migratepages_block(struct compact_control *cc, unsigned long low_pfn, nr_scanned++; page =pfn_to_page (low_pfn); +/* +* Vmemmap pages do not need to be isolated. +*/ +if (PageVmemmap (page)) { + low_pfn +=get_nr_vmemmap_pages (page) -1 ; +continue ; + }/* * Check if the pageblock has already been marked skipped. mm/memory_hotplug.c +120
-18@@ -42,6 +42,8 @@#include "internal.h" #include "shuffle.h" +extern int sections_per_block; +/* * online_page_callback contains pointer to current page onlining function. * Initially it is generic_online_page(). If it is required it could be @@ -279,6 +281,24 @@ static int check_pfn_span(unsigned long pfn, unsigned long nr_pages,return 0 ; } +static void mhp_reset_altmap (unsigned long next_pfn, +struct vmem_altmap *altmap) +{ + altmap->base_pfn = next_pfn; + altmap->alloc =0 ; +} + +static void mhp_init_altmap (unsigned long pfn,unsigned long nr_pages, +unsigned long mhp_flags, +struct vmem_altmap *altmap) +{ +if (mhp_flags &MHP_MEMMAP_DEVICE ) + altmap->free = nr_pages; +else + altmap->free =PAGES_PER_SECTION * sections_per_block; + altmap->base_pfn = pfn; +} +/* * Reasonably generic function for adding memory. It is * expected that archs that support memory hotplug will @@ -290,8 +310,17 @@ int __ref __add_pages(int nid, unsigned long pfn, unsigned long nr_pages, {unsigned long i;int start_sec, end_sec, err; -struct vmem_altmap *altmap = restrictions->altmap; +struct vmem_altmap *altmap; +struct vmem_altmap __memblk_altmap = {}; +unsigned long mhp_flags = restrictions->flags; +unsigned long sections_added; + +if (mhp_flags &MHP_VMEMMAP_FLAGS ) { +mhp_init_altmap (pfn, nr_pages, mhp_flags, &__memblk_altmap); + restrictions->altmap = &__memblk_altmap; + } + altmap = restrictions->altmap;if (altmap) {/* * Validate altmap is within bounds of the total request @@ -308,9 +337,10 @@ int __ref __add_pages(int nid, unsigned long pfn, unsigned long nr_pages,if (err)return err; + sections_added =1 ; start_sec =pfn_to_section_nr (pfn); end_sec =pfn_to_section_nr (pfn + nr_pages -1 ); -for (i = start_sec; i <= end_sec; i++) { +for (i = start_sec; i <= end_sec; i++, sections_added++) {unsigned long pfns; pfns = min(nr_pages, PAGES_PER_SECTION@@ -320,9 +350,19 @@ int __ref __add_pages(int nid, unsigned long pfn, unsigned long nr_pages,break ; pfn += pfns; nr_pages -= pfns; + +if (mhp_flags &MHP_MEMMAP_MEMBLOCK && + !(sections_added % sections_per_block)) { +mark_vmemmap_pages (altmap); +mhp_reset_altmap (pfn, altmap); + }cond_resched (); }vmemmap_populate_print_last (); + +if (mhp_flags &MHP_MEMMAP_DEVICE ) +mark_vmemmap_pages (altmap); +return err; }@@ -642,6 +682,14 @@ static int online_pages_blocks(unsigned long start, unsigned long nr_pages)while (start < end) { order =min (MAX_ORDER -1 ,get_order (PFN_PHYS (end) -PFN_PHYS (start))); +/* +* Check if the pfn is aligned to its order. +* If not, we decrement the order until it is, +* otherwise __free_one_page will bug us. +*/ +while (start & ((1 << order) -1 )) + order--; + (*online_page_callback)(pfn_to_page (start), order); onlined_pages += (1UL << order);@@ -654,13 +702,30 @@ static int online_pages_range(unsigned long start_pfn, unsigned long nr_pages, void *arg) {unsigned long onlined_pages = *(unsigned long *)arg; +unsigned long pfn = start_pfn; +unsigned long nr_vmemmap_pages =0 ; -if (PageReserved (pfn_to_page (start_pfn))) - onlined_pages +=online_pages_blocks (start_pfn, nr_pages); +if (PageVmemmap (pfn_to_page (pfn))) { +/* +* Do not send vmemmap pages to the page allocator. +*/ + nr_vmemmap_pages =get_nr_vmemmap_pages (pfn_to_page (start_pfn)); + nr_vmemmap_pages =min (nr_vmemmap_pages, nr_pages); + pfn += nr_vmemmap_pages; +if (nr_vmemmap_pages == nr_pages) +/* +* If the entire range contains only vmemmap pages, +* there are no pages left for the page allocator. +*/ + goto skip_online; + } +if (PageReserved (pfn_to_page (pfn))) + onlined_pages +=online_pages_blocks (pfn, nr_pages - nr_vmemmap_pages); +skip_online:online_mem_sections (start_pfn, start_pfn + nr_pages); - *(unsigned long *)arg = onlined_pages; + *(unsigned long *)arg = onlined_pages + nr_vmemmap_pages;return 0 ; }@@ -1051,6 +1116,23 @@ static int online_memory_block(struct memory_block *mem, void *arg)return device_online (&mem->dev); } +static bool mhp_check_correct_flags (unsigned long flags) +{ +if (flags &MHP_VMEMMAP_FLAGS ) { +if (!IS_ENABLED (CONFIG_SPARSEMEM_VMEMMAP )) { +WARN (1 ,"Vmemmap capability can only be used on" +"CONFIG_SPARSEMEM_VMEMMAP. Ignoring flags.\n" ); +return false; + } +if ((flags &MHP_VMEMMAP_FLAGS ) ==MHP_VMEMMAP_FLAGS ) { +WARN (1 ,"Both MHP_MEMMAP_DEVICE and MHP_MEMMAP_MEMBLOCK" +"were passed. Ignoring flags.\n" ); +return false; + } + } +return true; +} +/* * NOTE: The caller must call lock_device_hotplug() to serialize hotplug * and online/offline operations (triggered e.g. by sysfs). @@ -1086,6 +1168,9 @@ int __ref add_memory_resource(int nid, struct resource *res, unsigned long flags goto error; new_node = ret; +if (mhp_check_correct_flags (flags)) + restrictions.flags = flags; +/* call arch's memory hotadd */ ret =arch_add_memory (nid, start, size, &restrictions);if (ret <0 )@@ -1518,12 +1603,14 @@ static int __ref __offline_pages(unsigned long start_pfn, {unsigned long pfn, nr_pages;unsigned long offlined_pages =0 ; +unsigned long nr_vmemmap_pages =0 ;int ret, node, nr_isolate_pageblock;unsigned long flags;unsigned long valid_start, valid_end;struct zone *zone;struct memory_notify arg;char *reason; +bool skip = false;mem_hotplug_begin ();@@ -1540,15 +1627,24 @@ static int __ref __offline_pages(unsigned long start_pfn, node =zone_to_nid (zone); nr_pages = end_pfn - start_pfn; -/* set above range as isolated */ - ret =start_isolate_page_range (start_pfn, end_pfn, -MIGRATE_MOVABLE , -SKIP_HWPOISON |REPORT_FAILURE ); -if (ret <0 ) { - reason ="failure to isolate range" ; - goto failed_removal; +if (PageVmemmap (pfn_to_page (start_pfn))) { + nr_vmemmap_pages =get_nr_vmemmap_pages (pfn_to_page (start_pfn)); + nr_vmemmap_pages =min (nr_vmemmap_pages, nr_pages); +if (nr_vmemmap_pages == nr_pages) + skip = true; + } + +if (!skip) { +/* set above range as isolated */ + ret =start_isolate_page_range (start_pfn, end_pfn, +MIGRATE_MOVABLE , +SKIP_HWPOISON |REPORT_FAILURE ); +if (ret <0 ) { + reason ="failure to isolate range" ; + goto failed_removal; + } + nr_isolate_pageblock = ret; } - nr_isolate_pageblock = ret; arg.start_pfn = start_pfn; arg.nr_pages = nr_pages;@@ -1561,6 +1657,9 @@ static int __ref __offline_pages(unsigned long start_pfn, goto failed_removal_isolated; } +if (skip) + goto skip_migration; + do { for (pfn = start_pfn; pfn;) { if (signal_pending(current)) {@@ -1601,7 +1700,9 @@ static int __ref __offline_pages(unsigned long start_pfn,We cannot do rollback at this point. */ walk_system_ram_range (start_pfn, end_pfn - start_pfn, &offlined_pages, offline_isolated_pages_cb); -pr_info ("Offlined Pages %ld\n" , offlined_pages); + +skip_migration: +pr_info ("Offlined Pages %ld\n" , offlined_pages + nr_vmemmap_pages);/* * Onlining will reset pagetype flags and makes migrate type * MOVABLE, so just need to decrease the number of isolated @@ -1612,11 +1713,12 @@ static int __ref __offline_pages(unsigned long start_pfn,spin_unlock_irqrestore (&zone->lock, flags);/* removal success */ -adjust_managed_page_count (pfn_to_page (start_pfn), -offlined_pages); - zone->present_pages -= offlined_pages; +if (offlined_pages) +adjust_managed_page_count (pfn_to_page (start_pfn), -offlined_pages); + zone->present_pages -= offlined_pages + nr_vmemmap_pages;pgdat_resize_lock (zone->zone_pgdat, &flags); - zone->zone_pgdat->node_present_pages -= offlined_pages; + zone->zone_pgdat->node_present_pages -= offlined_pages + nr_vmemmap_pages;pgdat_resize_unlock (zone->zone_pgdat, &flags);init_per_zone_wmark_min ();@@ -1645,7 +1747,7 @@ static int __ref __offline_pages(unsigned long start_pfn,memory_notify (MEM_CANCEL_OFFLINE , &arg); failed_removal:pr_debug ("memory offlining [mem %#010llx-%#010llx] failed due to %s\n" , - (unsigned long long ) start_pfn <<PAGE_SHIFT , + (unsigned long long ) (start_pfn - nr_vmemmap_pages) <<PAGE_SHIFT , ((unsigned long long ) end_pfn <<PAGE_SHIFT ) -1 , reason);/* pushback to free area */ mm/page_alloc.c +20
-2@@ -1282,9 +1282,14 @@ static void free_one_page(struct zone *zone,static void __meminit __init_single_page (struct page *page,unsigned long pfn,unsigned long zone,int nid) { -mm_zero_struct_page (page); +if (!__PageVmemmap (page)) { +/* +* Vmemmap pages need to preserve their state. +*/ +mm_zero_struct_page (page); +init_page_count (page); + }set_page_links (page, zone, nid, pfn); -init_page_count (page);page_mapcount_reset (page);page_cpupid_reset_last (page);page_kasan_tag_reset (page);@@ -8143,6 +8148,14 @@ bool has_unmovable_pages(struct zone *zone, struct page *page, int count, page =pfn_to_page (check); +/* +* Vmemmap pages are not needed to be moved around. +*/ +if (PageVmemmap (page)) { + iter +=get_nr_vmemmap_pages (page) -1 ; +continue ; + } +if (PageReserved (page)) goto unmovable;@@ -8510,6 +8523,11 @@ __offline_isolated_pages(unsigned long start_pfn, unsigned long end_pfn)continue ; } page =pfn_to_page (pfn); + +if (PageVmemmap (page)) { + pfn +=get_nr_vmemmap_pages (page); +continue ; + }/* * The HWPoisoned page may be not in buddy system, and * page_count() is not 0. mm/page_isolation.c +13
-1@@ -146,7 +146,7 @@ static void unset_migratetype_isolate(struct page *page, unsigned migratetype)static inline struct page *__first_valid_page (unsigned long pfn,unsigned long nr_pages) { -int i; +unsigned long i;for (i =0 ; i < nr_pages; i++) {struct page *page;@@ -154,6 +154,10 @@ __first_valid_page(unsigned long pfn, unsigned long nr_pages) page =pfn_to_online_page (pfn + i);if (!page)continue ; +if (PageVmemmap (page)) { + i +=get_nr_vmemmap_pages (page) -1 ; +continue ; + }return page; }return NULL ;@@ -268,6 +272,14 @@ __test_page_isolated_in_pageblock(unsigned long pfn, unsigned long end_pfn,continue ; } page =pfn_to_page (pfn); +/* +* Vmemmap pages are not isolated. Skip them. +*/ +if (PageVmemmap (page)) { + pfn +=get_nr_vmemmap_pages (page); +continue ; + } +if (PageBuddy (page))/* * If the page is on a free list, it has to be on mm/sparse.c +93
-0@@ -635,6 +635,94 @@ void offline_mem_sections(unsigned long start_pfn, unsigned long end_pfn)#endif #ifdef CONFIG_SPARSEMEM_VMEMMAP +void mark_vmemmap_pages (struct vmem_altmap *self) +{ +unsigned long pfn = self->base_pfn + self->reserve; +unsigned long nr_pages = self->alloc; +unsigned long nr_sects = self->free /PAGES_PER_SECTION ; +unsigned long i; +struct page *head; + +if (!nr_pages) +return ; + +pr_debug ("%s: marking %px - %px as Vmemmap (%ld pages)\n" , + __func__, +pfn_to_page (pfn), +pfn_to_page (pfn + nr_pages -1 ), + nr_pages); + +/* +* All allocations for the memory hotplug are the same sized so align +* should be 0. +*/ +WARN_ON (self->align); + +/* +* Layout of vmemmap pages: +* [Head->refcount] : Nr sections used by this altmap +* [Head->private] : Nr of vmemmap pages +* [Tail->freelist] : Pointer to the head page +*/ + +/* +* Head, first vmemmap page +*/ + head =pfn_to_page (pfn); +for (i =0 ; i < nr_pages; i++, pfn++) { +struct page *page =pfn_to_page (pfn); + +mm_zero_struct_page (page); +__SetPageVmemmap (page); + page->freelist = head; +init_page_count (page); + } +set_page_count (head, (int )nr_sects); +set_page_private (head, nr_pages); +} +/* +* If the range we are trying to remove was hot-added with vmemmap pages +* using MHP_MEMMAP_DEVICE, we need to keep track of it to know how much +* do we have do defer the free up. +* Since sections are removed sequentally in __remove_pages()-> +* __remove_section(), we just wait until we hit the last section. +* Once that happens, we can trigger free_deferred_vmemmap_range to actually +* free the whole memory-range. +*/ +static struct page *head_vmemmap_page =NULL ;; +static bool freeing_vmemmap_range = false; + +static inline bool vmemmap_dec_and_test (void ) +{ +return page_ref_dec_and_test (head_vmemmap_page); +} + +static void free_deferred_vmemmap_range (unsigned long start, +unsigned long end) +{ +unsigned long nr_pages = end - start; +unsigned long first_section = (unsigned long )head_vmemmap_page; + +while (start >= first_section) { +vmemmap_free (start, end,NULL ); + end = start; + start -= nr_pages; + } + head_vmemmap_page =NULL ; + freeing_vmemmap_range = false; +} + +static void deferred_vmemmap_free (unsigned long start,unsigned long end) +{ +if (!freeing_vmemmap_range) { + freeing_vmemmap_range = true; + head_vmemmap_page = (struct page *)start; + } + +if (vmemmap_dec_and_test ()) +free_deferred_vmemmap_range (start, end); +} +static struct page *populate_section_memmap (unsigned long pfn,unsigned long nr_pages,int nid,struct vmem_altmap *altmap) {@@ -647,6 +735,11 @@ static void depopulate_section_memmap(unsigned long pfn, unsigned long nr_pages,unsigned long start = (unsigned long )pfn_to_page (pfn);unsigned long end = start + nr_pages *sizeof (struct page ); +if (PageVmemmap ((struct page *)start) || freeing_vmemmap_range) { +deferred_vmemmap_free (start, end); +return ; + } +vmemmap_free (start, end, altmap); }static void free_map_bootmem (struct page *memmap)
Signature · 3 lines
Thanks, David / dhildenb
Oscar Salvador
maintainerRe: [PATCH v2 4/5] mm,memory_hotplug: allocate memmap from the added memory range for sparse-vmemmap
Quoted 43 lines · David Hildenbrand
Quoted 36 lines · Oscar Salvador
Physical memory hotadd has to allocate a memmap (struct page array) for the newly added memory section. Currently,
alloc_pages_node()is used for those allocations.This has some disadvantages:
a) an existing memory is consumed for that purpose(~2MB per 128MB memory section on x86_64)b) if the whole node is movable then we have off-node struct pages which has performance drawbacks.
a) has turned out to be a problem for memory hotplug based ballooning because the userspace might not react in time to online memory while the memory consumed during physical hotadd consumes enough memory to push system to OOM.
31bc3858ea3e("memory-hotplug: add automatic onlining policy for the newly added memory") has been added to workaround that problem.I have also seen hot-add operations failing on powerpc due to the fact that we try to use order-8 pages. If the base page size is 64KB, this gives us 16MB, and if we run out of those, we simply fail. One could arge that we can fall back to basepages as we do in
x86_64, but we can do better whenCONFIG_SPARSEMEM_VMEMMAPis enabled.Vmemap page tables can map arbitrary memory.
That means that we can simply use the beginning of each memory section and map struct pages there.
struct pages which back the allocated space then just need to be treated carefully.Implementation wise we reuse
vmem_altmapinfrastructure to override the default allocator used by__vmemap_populate. Once the memmap is allocated we need a way to mark altmap pfns used for the allocation. If MHP_MEMMAP_{DEVICE,MEMBLOCK} flag was passed, we set up the layout of the altmap structure at the beginning of__add_pages(), and then we callmark_vmemmap_pages().Quoted 5 lines
Depending on which flag is passed (
MHP_MEMMAP_DEVICEorMHP_MEMMAP_MEMBLOCK),mark_vmemmap_pages()gets called at a different stage.
WithMHP_MEMMAP_MEMBLOCK, we call it once we have populated the sections fitting in a single memblock, while withMHP_MEMMAP_DEVICEwe wait until all sections have been populated.
Quoted 5 lines
So, only
MHP_MEMMAP_DEVICEwill be used. Would it make sense to only implement one for now (after we decide which one to use), to make things simpler?Or do you have a real user in mind for the other?
Currently, only MHP_MEMMAP_DEVICE will be used, as we only pass flags from acpi memory-hotplug path.
All the others: hyper-v, Xen,... will have to be evaluated to see which one do they want to use.
Although MHP_MEMMAP_DEVICE is the only one used right now, I introduced MHP_MEMMAP_MEMBLOCK to give the callers the choice of using MHP_MEMMAP_MEMBLOCK if they think that a strategy where hot-removing works in a different granularity makes sense.
Moreover, since they both use the same API, there is no extra code needed to handle it. (Just two lines in __add_pages())
This arose here [1].
[1] https://patchwork.kernel.org/project/linux-mm/list/?submitter=137061
Signature · 2 lines
Oscar Salvador SUSE L3
Re: [PATCH v2 4/5] mm,memory_hotplug: allocate memmap from the added memory range for sparse-vmemmap
Quoted 61 lines · Oscar Salvador
Quoted 43 lines · David Hildenbrand
Quoted 36 lines · Oscar Salvador
Physical memory hotadd has to allocate a memmap (struct page array) for the newly added memory section. Currently,
alloc_pages_node()is used for those allocations.This has some disadvantages:
a) an existing memory is consumed for that purpose(~2MB per 128MB memory section on x86_64)b) if the whole node is movable then we have off-node struct pages which has performance drawbacks.
a) has turned out to be a problem for memory hotplug based ballooning because the userspace might not react in time to online memory while the memory consumed during physical hotadd consumes enough memory to push system to OOM.
31bc3858ea3e("memory-hotplug: add automatic onlining policy for the newly added memory") has been added to workaround that problem.I have also seen hot-add operations failing on powerpc due to the fact that we try to use order-8 pages. If the base page size is 64KB, this gives us 16MB, and if we run out of those, we simply fail. One could arge that we can fall back to basepages as we do in
x86_64, but we can do better whenCONFIG_SPARSEMEM_VMEMMAPis enabled.Vmemap page tables can map arbitrary memory.
That means that we can simply use the beginning of each memory section and map struct pages there.
struct pages which back the allocated space then just need to be treated carefully.Implementation wise we reuse
vmem_altmapinfrastructure to override the default allocator used by__vmemap_populate. Once the memmap is allocated we need a way to mark altmap pfns used for the allocation. If MHP_MEMMAP_{DEVICE,MEMBLOCK} flag was passed, we set up the layout of the altmap structure at the beginning of__add_pages(), and then we callmark_vmemmap_pages().Quoted 5 lines
Depending on which flag is passed (
MHP_MEMMAP_DEVICEorMHP_MEMMAP_MEMBLOCK),mark_vmemmap_pages()gets called at a different stage.
WithMHP_MEMMAP_MEMBLOCK, we call it once we have populated the sections fitting in a single memblock, while withMHP_MEMMAP_DEVICEwe wait until all sections have been populated.Quoted 5 lines
So, only
MHP_MEMMAP_DEVICEwill be used. Would it make sense to only implement one for now (after we decide which one to use), to make things simpler?Or do you have a real user in mind for the other?
Currently, only
MHP_MEMMAP_DEVICEwill be used, as we only pass flags from acpi memory-hotplug path.All the others: hyper-v, Xen,... will have to be evaluated to see which one do they want to use.
Although
MHP_MEMMAP_DEVICEis the only one used right now, I introducedMHP_MEMMAP_MEMBLOCKto give the callers the choice of usingMHP_MEMMAP_MEMBLOCKif they think that a strategy where hot-removing works in a different granularity makes sense.
Quoted 7 lines
Moreover, since they both use the same API, there is no extra code needed to handle it. (Just two lines in
__add_pages())This arose here [1].
[1] https://patchwork.kernel.org/project/linux-mm/list/?submitter=137061
Just noting that you can emulate MHP_MEMMAP_MEMBLOCK via MHP_MEMMAP_DEVICE by adding memory in memory block granularity (which is what hyper-v and xen do if I am not wrong!).
Not yet convinced that both, MHP_MEMMAP_MEMBLOCK and MHP_MEMMAP_DEVICE are needed. But we can sort that out later.
Signature · 3 lines
Thanks, David / dhildenb
Re: [PATCH v2 4/5] mm,memory_hotplug: allocate memmap from the added memory range for sparse-vmemmap
In reply to Oscar SalvadorHello Oscar,
Quoted 5 lines · Oscar Salvador
arch/arm64/mm/mmu.c +0
-0
arch/arm64/mm/mmu.c int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node, · line 773
Quoted 10 lines
arch/arm64/mm/mmu.c +4
-1@@ -765,7 +765,10 @@ int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node,if (pmd_none (READ_ONCE (*pmdp))) {void *p =NULL ; - p =vmemmap_alloc_block_buf (PMD_SIZE , node); +if (altmap) + p =altmap_alloc_block_buf (PMD_SIZE , altmap); +else + p =vmemmap_alloc_block_buf (PMD_SIZE , node);if (!p)return -ENOMEM ;
Is this really required to be part of this series ? I have an ongoing work (reworked https://patchwork.kernel.org/patch/10882781/) enabling altmap support on arm64 during memory hot add and remove path which is waiting on arm64 memory-hot remove to be merged first.
- Anshuman
Oscar Salvador
maintainerRe: [PATCH v2 4/5] mm,memory_hotplug: allocate memmap from the added memory range for sparse-vmemmap
Quoted 11 lines · Anshuman Khandual
Hello Oscar,
Quoted 8 lines · Oscar Salvador
arch/arm64/mm/mmu.c +0
-0@@ -765,7 +765,10 @@ int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node,if (pmd_none (READ_ONCE (*pmdp))) {void *p =NULL ;
Quoted 12 lines
arch/arm64/mm/mmu.c int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node, · line 773
Quoted 7 lines
arch/arm64/mm/mmu.c +4
-1- p =vmemmap_alloc_block_buf (PMD_SIZE , node); +if (altmap) + p =altmap_alloc_block_buf (PMD_SIZE , altmap); +else + p =vmemmap_alloc_block_buf (PMD_SIZE , node);if (!p)return -ENOMEM ;Is this really required to be part of this series ? I have an ongoing work (reworked https://patchwork.kernel.org/patch/10882781/) enabling altmap support on arm64 during memory hot add and remove path which is waiting on arm64 memory-hot remove to be merged first.
Hi Anshuman,
I can drop this chunk in the next version.
No problem.
Signature · 2 lines
Oscar Salvador SUSE L3
Re: [PATCH v2 4/5] mm,memory_hotplug: allocate memmap from the added memory range for sparse-vmemmap
In reply to Oscar SalvadorQuoted 87 lines · Oscar Salvador
Physical memory hotadd has to allocate a memmap (struct page array) for the newly added memory section. Currently,
alloc_pages_node()is used for those allocations.This has some disadvantages:
a) an existing memory is consumed for that purpose(~2MB per 128MB memory section on x86_64)b) if the whole node is movable then we have off-node struct pages which has performance drawbacks.
a) has turned out to be a problem for memory hotplug based ballooning because the userspace might not react in time to online memory while the memory consumed during physical hotadd consumes enough memory to push system to OOM.
31bc3858ea3e("memory-hotplug: add automatic onlining policy for the newly added memory") has been added to workaround that problem.I have also seen hot-add operations failing on powerpc due to the fact that we try to use order-8 pages. If the base page size is 64KB, this gives us 16MB, and if we run out of those, we simply fail. One could arge that we can fall back to basepages as we do in
x86_64, but we can do better whenCONFIG_SPARSEMEM_VMEMMAPis enabled.Vmemap page tables can map arbitrary memory.
That means that we can simply use the beginning of each memory section and map struct pages there.
struct pages which back the allocated space then just need to be treated carefully.Implementation wise we reuse
vmem_altmapinfrastructure to override the default allocator used by__vmemap_populate. Once the memmap is allocated we need a way to mark altmap pfns used for the allocation. If MHP_MEMMAP_{DEVICE,MEMBLOCK} flag was passed, we set up the layout of the altmap structure at the beginning of__add_pages(), and then we callmark_vmemmap_pages().Depending on which flag is passed (
MHP_MEMMAP_DEVICEorMHP_MEMMAP_MEMBLOCK),mark_vmemmap_pages()gets called at a different stage.
WithMHP_MEMMAP_MEMBLOCK, we call it once we have populated the sections fitting in a single memblock, while withMHP_MEMMAP_DEVICEwe wait until all sections have been populated.
mark_vmemmap_pages()marks the pages as vmemmap and sets some metadata:The current layout of the Vmemmap pages are:
[Head->refcount] : Nr sections used by this altmap [Head->private] : Nr of vmemmap pages [Tail->freelist] : Pointer to the head pageThis is done to easy the computation we need in some places. E.g:
Example 1)
We hot-add 1GB onx86_64(memory block 128MB) usingMHP_MEMMAP_DEVICE:
head->_refcount= 8 sectionshead->private= 4096 vmemmap pages
tail's->freelist = headExample 2)
We hot-add 1GB onx86_64usingMHP_MEMMAP_MEMBLOCK:[at the beginning of each memblock]
head->_refcount= 1 sectionhead->private= 512 vmemmap pages
tail's->freelist = headWe have the refcount because when using
MHP_MEMMAP_DEVICE, we need to know how much do we have to defer the call tovmemmap_free().
The thing is that the first pages of the hot-added range are used to create the memmap mapping, so we cannot remove those first, otherwise we would blow up when accessing the other pages.What we do is that since when we hot-remove a memory-range, sections are being removed sequentially, we wait until we hit the last section, and then we free the hole range to
vmemmap_freebackwards.
We know that it is the last section because in every pass we decreasehead->_refcount, and when it reaches 0, we got our last section.We also have to be careful about those pages during online and offline operations. They are simply skipped, so online will keep them reserved and so unusable for any other purpose and offline ignores them so they do not block the offline operation.
Quoted 5 lines
In offline operation we only have to check for one particularity. Depending on how large was the hot-added range, and using
MHP_MEMMAP_DEVICE, can be that one or more than one memory block is filled with only vmemmap pages. We just need to check for this case and skip 1) isolating 2) migrating, because those pages do not need to be migrated anywhere, they are self-hosted.
Can you rewrite the changelog without using the word 'we' I get confused when it seems to reference the 'we' current implementation vs the 'we' new implementation.
Quoted 58 lines
Signed-off-by Oscar Salvador <[email protected]>--- arch/arm64/mm/mmu.c | 5 +- arch/powerpc/mm/init_64.c | 7 +++ arch/s390/mm/init.c | 6 ++ arch/x86/mm/init_64.c | 10 +++ drivers/acpi/acpi_memhotplug.c | 2 +- drivers/base/memory.c | 2 +- include/linux/memory_hotplug.h | 6 ++ include/linux/memremap.h | 2 +- mm/compaction.c | 7 +++ mm/memory_hotplug.c | 138 +++++++++++++++++++++++++++++++++++------ mm/page_alloc.c | 22 ++++++- mm/page_isolation.c | 14 ++++- mm/sparse.c | 93 +++++++++++++++++++++++++++ 13 files changed, 289 insertions(+), 25 deletions(-)arch/arm64/mm/mmu.c +4
-1@@ -765,7 +765,10 @@ int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node,if (pmd_none (READ_ONCE (*pmdp))) {void *p =NULL ; - p =vmemmap_alloc_block_buf (PMD_SIZE , node); +if (altmap) + p =altmap_alloc_block_buf (PMD_SIZE , altmap); +else + p =vmemmap_alloc_block_buf (PMD_SIZE , node);if (!p)return -ENOMEM ;arch/powerpc/mm/init_64.c +7
-0@@ -289,6 +289,13 @@ void __ref vmemmap_free(unsigned long start, unsigned long end,if (base_pfn >= alt_start && base_pfn < alt_end) {vmem_altmap_free (altmap, nr_pages); + }else if (PageVmemmap (page)) { +/* +* runtime vmemmap pages are residing inside the memory +* section so they do not have to be freed anywhere. +*/ +while (PageVmemmap (page)) +__ClearPageVmemmap (page++); }else if (PageReserved (page)) {/* allocated from bootmem */ if (page_size <PAGE_SIZE ) {arch/s390/mm/init.c +0
-0@@ -226,6 +226,12 @@ int arch_add_memory(int nid, u64 start, u64 size,unsigned long size_pages =PFN_DOWN (size);
arch/s390/mm/init.c int arch_add_memory(int nid, u64 start, u64 size, · line 236
Quoted 10 lines
arch/s390/mm/init.c +6
-0int rc; +/* +* Physical memory is added only later during the memory online so we +* cannot use the added range at this stage unfortunately. +*/ + restrictions->flags &= ~restrictions->flags; +if (WARN_ON_ONCE (restrictions->altmap))return -EINVAL ;
Perhaps these per-arch changes should be pulled out into separate prep patches?
Quoted 8 lines
arch/x86/mm/init_64.c +0
-0@@ -874,6 +874,16 @@ static void __meminit free_pagetable(struct page *page, int order)unsigned long magic;unsigned int nr_pages =1 << order;
arch/x86/mm/init_64.c static void __meminit free_pagetable(struct page *page, int order) · line 885
Quoted 10 lines
arch/x86/mm/init_64.c +9
-0+/* +* Runtime vmemmap pages are residing inside the memory section so +* they do not have to be freed anywhere. +*/ +if (PageVmemmap (page)) { +while (nr_pages--) +__ClearPageVmemmap (page++); +return ; + }
If there is nothing to do and these pages are just going to be released, why spend any effort clearing the vmemmap state?
Quoted 9 lines
arch/x86/mm/init_64.c +1
-0+/* bootmem page has reserved flag */ if (PageReserved (page)) {__ClearPageReserved (page);drivers/acpi/acpi_memhotplug.c +0
-0
drivers/acpi/acpi_memhotplug.c static int acpi_memory_enable_device(struct acpi_memory_device *mem_device) · line 221
Quoted 5 lines
drivers/acpi/acpi_memhotplug.c +1
-1@@ -218,7 +218,7 @@ static int acpi_memory_enable_device(struct acpi_memory_device *mem_device)if (node <0 ) node =memory_add_physaddr_to_nid (info->start_addr); - result =__add_memory (node, info->start_addr, info->length,0 ); + result =__add_memory (node, info->start_addr, info->length,MHP_MEMMAP_DEVICE );
Why is this changed to MHP_MEMMAP_DEVICE? Where does it get the altmap?
Quoted 49 lines
drivers/acpi/acpi_memhotplug.c +0
-0/* * If the memory block has been used by the kernel, add_memory() drivers/base/memory.c +1
-1@@ -32,7 +32,7 @@ static DEFINE_MUTEX(mem_sysfs_mutex);#define to_memory_block (dev) container_of(dev, struct memory_block, dev) -static int sections_per_block; +int sections_per_block;static inline int base_memory_block_id (int section_nr) {include/linux/memory_hotplug.h +6
-0@@ -375,4 +375,10 @@ extern bool allow_online_pfn_range(int nid, unsigned long pfn, unsigned long nr_ int online_type);extern struct zone *zone_for_pfn_range (int online_type,int nid,unsigned start_pfn,unsigned long nr_pages); + +#ifdef CONFIG_SPARSEMEM_VMEMMAP +extern void mark_vmemmap_pages (struct vmem_altmap *self); +#else +static inline void mark_vmemmap_pages (struct vmem_altmap *self) {} +#endif #endif /* __LINUX_MEMORY_HOTPLUG_H */ include/linux/memremap.h +1
-1@@ -16,7 +16,7 @@ struct device;* @alloc: track pages consumed, private to vmemmap_populate() */ struct vmem_altmap { -const unsigned long base_pfn; +unsigned long base_pfn;const unsigned long reserve;unsigned long free;unsigned long align;mm/compaction.c +0
-0
mm/compaction.c isolate_migratepages_block(struct compact_control *cc, unsigned long low_pfn, · line 862
Quoted 8 lines
mm/compaction.c +5
-0@@ -855,6 +855,13 @@ isolate_migratepages_block(struct compact_control *cc, unsigned long low_pfn, nr_scanned++; page =pfn_to_page (low_pfn); +/* +* Vmemmap pages do not need to be isolated. +*/ +if (PageVmemmap (page)) { + low_pfn +=get_nr_vmemmap_pages (page) -1 ;
I'm failing to grok the get_nr_vmemmap_pages() api. It seems this is more of a get_next_mapped_page() and perhaps it should VM_BUG_ON if it is not passed a Vmemmap page.
Quoted 28 lines
mm/compaction.c +2
-0+continue ; + }/* * Check if the pageblock has already been marked skipped. mm/memory_hotplug.c +8
-0@@ -42,6 +42,8 @@#include "internal.h" #include "shuffle.h" +extern int sections_per_block; +/* * online_page_callback contains pointer to current page onlining function. * Initially it is generic_online_page(). If it is required it could be @@ -279,6 +281,24 @@ static int check_pfn_span(unsigned long pfn, unsigned long nr_pages,return 0 ; } +static void mhp_reset_altmap (unsigned long next_pfn, +struct vmem_altmap *altmap) +{ + altmap->base_pfn = next_pfn; + altmap->alloc =0 ; +}
mm/memory_hotplug.c static int check_pfn_span(unsigned long pfn, unsigned long nr_pages, · line 299
Quoted 10 lines
mm/memory_hotplug.c +10
-0+ +static void mhp_init_altmap (unsigned long pfn,unsigned long nr_pages, +unsigned long mhp_flags, +struct vmem_altmap *altmap) +{ +if (mhp_flags &MHP_MEMMAP_DEVICE ) + altmap->free = nr_pages; +else + altmap->free =PAGES_PER_SECTION * sections_per_block; + altmap->base_pfn = pfn;
The ->free member is meant to be the number of free pages in the altmap this seems to be set to the number of pages being mapped. Am I misreading?
Quoted 9 lines
mm/memory_hotplug.c +2
-0+} +/* * Reasonably generic function for adding memory. It is * expected that archs that support memory hotplug will @@ -290,8 +310,17 @@ int __ref __add_pages(int nid, unsigned long pfn, unsigned long nr_pages, {unsigned long i;int start_sec, end_sec, err;
mm/memory_hotplug.c int __ref __add_pages(int nid, unsigned long pfn, unsigned long nr_pages, · line 321
Quoted 10 lines
mm/memory_hotplug.c +9
-1-struct vmem_altmap *altmap = restrictions->altmap; +struct vmem_altmap *altmap; +struct vmem_altmap __memblk_altmap = {}; +unsigned long mhp_flags = restrictions->flags; +unsigned long sections_added; + +if (mhp_flags &MHP_VMEMMAP_FLAGS ) { +mhp_init_altmap (pfn, nr_pages, mhp_flags, &__memblk_altmap); + restrictions->altmap = &__memblk_altmap; + }
So this silently overrides a passed in altmap if a flag is set? The NVDIMM use case can't necessarily trust __memblk_altmap to be consistent with what the nvdimm namespace has reserved.
Quoted 39 lines
mm/memory_hotplug.c +13
-1+ altmap = restrictions->altmap;if (altmap) {/* * Validate altmap is within bounds of the total request @@ -308,9 +337,10 @@ int __ref __add_pages(int nid, unsigned long pfn, unsigned long nr_pages,if (err)return err; + sections_added =1 ; start_sec =pfn_to_section_nr (pfn); end_sec =pfn_to_section_nr (pfn + nr_pages -1 ); -for (i = start_sec; i <= end_sec; i++) { +for (i = start_sec; i <= end_sec; i++, sections_added++) {unsigned long pfns; pfns = min(nr_pages, PAGES_PER_SECTION@@ -320,9 +350,19 @@ int __ref __add_pages(int nid, unsigned long pfn, unsigned long nr_pages,break ; pfn += pfns; nr_pages -= pfns; + +if (mhp_flags &MHP_MEMMAP_MEMBLOCK && + !(sections_added % sections_per_block)) { +mark_vmemmap_pages (altmap); +mhp_reset_altmap (pfn, altmap); + }cond_resched (); }vmemmap_populate_print_last (); + +if (mhp_flags &MHP_MEMMAP_DEVICE ) +mark_vmemmap_pages (altmap); +return err; }@@ -642,6 +682,14 @@ static int online_pages_blocks(unsigned long start, unsigned long nr_pages)while (start < end) {
mm/memory_hotplug.c static int online_pages_blocks(unsigned long start, unsigned long nr_pages) · line 692
Quoted 10 lines
mm/memory_hotplug.c +8
-0order =min (MAX_ORDER -1 ,get_order (PFN_PHYS (end) -PFN_PHYS (start))); +/* +* Check if the pfn is aligned to its order. +* If not, we decrement the order until it is, +* otherwise __free_one_page will bug us. +*/ +while (start & ((1 << order) -1 )) + order--; +
Is this a candidate for a standalone patch? It seems out of place for this patch.
Quoted 16 lines
mm/memory_hotplug.c +6
-2(*online_page_callback)(pfn_to_page (start), order); onlined_pages += (1UL << order);@@ -654,13 +702,30 @@ static int online_pages_range(unsigned long start_pfn, unsigned long nr_pages, void *arg) {unsigned long onlined_pages = *(unsigned long *)arg; +unsigned long pfn = start_pfn; +unsigned long nr_vmemmap_pages =0 ; -if (PageReserved (pfn_to_page (start_pfn))) - onlined_pages +=online_pages_blocks (start_pfn, nr_pages); +if (PageVmemmap (pfn_to_page (pfn))) { +/* +* Do not send vmemmap pages to the page allocator. +*/
mm/memory_hotplug.c static int online_pages_range(unsigned long start_pfn, unsigned long nr_pages, · line 721
Quoted 10 lines
mm/memory_hotplug.c +10
-0+ nr_vmemmap_pages =get_nr_vmemmap_pages (pfn_to_page (start_pfn)); + nr_vmemmap_pages =min (nr_vmemmap_pages, nr_pages); + pfn += nr_vmemmap_pages; +if (nr_vmemmap_pages == nr_pages) +/* +* If the entire range contains only vmemmap pages, +* there are no pages left for the page allocator. +*/ + goto skip_online; + }
Seems this should be caller (online_pages()) responsibility rather than making this fixup internal to the helper... and if it's moved up can it be pushed one more level up so even online_pages() need not worry about this fixup? It just does not seem to an operation that belongs to the online path. Might that eliminate the need for tracking altmap parameters in struct page?
Oscar Salvador
maintainerPATCH v2 5/5 mm,memory_hotplug: Allow userspace to enable/disable vmemmap
In reply to Oscar SalvadorIt seems that we have some users out there that want to expose all hotpluggable memory to userspace, so this implements a toggling mechanism for those users who want to disable it.
By default, vmemmap pages mechanism is enabled.
--- drivers/base/memory.c | 33 +++++++++++++++++++++++++++++++++ include/linux/memory_hotplug.h | 3 +++ mm/memory_hotplug.c | 6 +++++- 3 files changed, 41 insertions(+), 1 deletion(-)
drivers/base/memory.c +33 -0
@@ -573,6 +573,35 @@ static DEVICE_ATTR_WO(soft_offline_page);static DEVICE_ATTR_WO (hard_offline_page);#endif +#ifdef CONFIG_SPARSEMEM_VMEMMAP +static ssize_t vmemmap_hotplug_show (struct device *dev, +struct device_attribute *attr,char *buf) +{ +if (vmemmap_enabled) +return sprintf (buf,"enabled\n" ); +else +return sprintf (buf,"disabled\n" ); +} + +static ssize_t vmemmap_hotplug_store (struct device *dev, +struct device_attribute *attr, +const char *buf,size_t count) +{ +if (!capable (CAP_SYS_ADMIN )) +return -EPERM ; + +if (sysfs_streq (buf,"enable" )) + vmemmap_enabled = true; +else if (sysfs_streq (buf,"disable" )) + vmemmap_enabled = false; +else +return -EINVAL ; + +return count; +} +static DEVICE_ATTR_RW (vmemmap_hotplug); +#endif +/* * Note that phys_device is optional. It is here to allow for * differentiation between which *physical* devices each
@@ -799,6 +828,10 @@ static struct attribute *memory_root_attrs[] = { &dev_attr_hard_offline_page.attr,#endif +#ifdef CONFIG_SPARSEMEM_VMEMMAP + &dev_attr_vmemmap_hotplug.attr, +#endif + &dev_attr_block_size_bytes.attr, &dev_attr_auto_online_blocks.attr,NULL
include/linux/memory_hotplug.h +3 -0
@@ -131,6 +131,9 @@ extern int arch_add_memory(int nid, u64 start, u64 size, struct mhp_restrictions *restrictions);extern u64 max_mem_size; +#ifdef CONFIG_SPARSEMEM_VMEMMAP +extern bool vmemmap_enabled; +#endif extern bool memhp_auto_online;/* If movable_node boot option specified */ extern bool movable_node_enabled;
mm/memory_hotplug.c +5 -1
@@ -70,6 +70,10 @@ void put_online_mems(void)bool movable_node_enabled = false; +#ifdef CONFIG_SPARSEMEM_VMEMMAP +bool vmemmap_enabled__read_mostly = true; +#endif +#ifndef CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE bool memhp_auto_online;#else
@@ -1168,7 +1172,7 @@ int __ref add_memory_resource(int nid, struct resource *res, unsigned long flags goto error; new_node = ret; -if (mhp_check_correct_flags (flags)) +if (vmemmap_enabled &&mhp_check_correct_flags (flags)) restrictions.flags = flags;/* call arch's memory hotadd */
Signature · 1 line
2.12.3
Quoted 22 lines · Oscar Salvador
Hi,
It has been while since I sent previous version [1].
In this version I added some feedback I got back then, like letting the caller decide whether he wants allocating per memory block or per memory range (patch#2), and having the chance to disable vmemmap when users want to expose all hotpluggable memory to userspace (patch#5).
[Testing]
While I could test last version on powerpc, and Huawei's fellows helped me out testing it on arm64, this time I could only test it on
x86_64. The codebase is quite the same, so I would not expect surprises.-
x86_64: small and large memblocks (128MB, 1G and 2G)
- Kernel module that adds memory spanning multiple memblocks and remove that memory in a different granularity.So far, only acpi memory hotplug uses the new flag. The other callers can be changed depending on their needs.
Quoted 8 lines
Of course, more testing and feedback is appreciated.
[Coverletter]
This is another step to make memory hotplug more usable. The primary goal of this patchset is to reduce memory overhead of the hot-added memory (at least for
SPARSEMEM_VMEMMAPmemory model). The current way we use to populate memmap (struct page array) has two main drawbacks:
Mental note: How will it be handled if a caller specifies "Allocate memmap from hotadded memory", but we are running under SPARSEMEM where we can't do this.
Quoted 12 lines
a) it consumes an additional memory until the hotadded memory itself is onlined and
b) memmap might end up on a different numa node which is especially true formovable_nodeconfiguration.a) it is a problem especially for memory hotplug based memory "ballooning" solutions when the delay between physical memory hotplug and the onlining can lead to OOM and that led to introduction of hacks like auto onlining (see
31bc3858ea3e("memory-hotplug: add automatic onlining policy for the newly added memory")).
Quoted 8 lines
b) can have performance drawbacks.
Another minor case is that I have seen hot-add operations failing on archs because they were running out of order-x pages.
E.g On powerpc, in certain configurations, we use order-8 pages, and given 64KB base pagesize, that is 16MB.
If we run out of those, we just fail the operation and we cannot add more memory.
At least for SPARSEMEM, we fallback to vmalloc() to work around this issue. I haven't looked into the populate_section_memmap() internals yet. Can you point me at the code that performs this allocation?
Quoted 68 lines
We could fallback to base pages as
x86_64does, but we can do better.One way to mitigate all these issues is to simply allocate memmap array (which is the largest memory footprint of the physical memory hotplug) from the hot-added memory itself.
SPARSEMEM_VMEMMAPmemory model allows us to map any pfn range so the memory doesn't need to be online to be usable for the array. See patch 3 for more details.
This feature is only usable whenCONFIG_SPARSEMEM_VMEMMAPis set.[Overall design]:
Implementation wise we reuse
vmem_altmapinfrastructure to override the default allocator used byvmemap_populate. Once the memmap is allocated we need a way to mark altmap pfns used for the allocation. If MHP_MEMMAP_{DEVICE,MEMBLOCK} flag was passed, we set up the layout of the altmap structure at the beginning of__add_pages(), and then we callmark_vmemmap_pages().The flags are either
MHP_MEMMAP_DEVICEorMHP_MEMMAP_MEMBLOCK, and only differ in the way they allocate vmemmap pages within the memory blocks.
MHP_MEMMAP_MEMBLOCK:
- With this flag, we will allocate vmemmap pages in each memory block. This means that if we hot-add a range that spans multiple memory blocks, we will use the beginning of each memory block for the vmemmap pages. This strategy is good for cases where the caller wants the flexiblity to hot-remove memory in a different granularity than when it was added.
MHP_MEMMAP_DEVICE:
- With this flag, we will store all vmemmap pages at the beginning of hot-added memory.So it is a tradeoff of flexiblity vs contigous memory. More info on the above can be found in patch#2.
Depending on which flag is passed (
MHP_MEMMAP_DEVICEorMHP_MEMMAP_MEMBLOCK),mark_vmemmap_pages()gets called at a different stage.
WithMHP_MEMMAP_MEMBLOCK, we call it once we have populated the sections fitting in a single memblock, while withMHP_MEMMAP_DEVICEwe wait until all sections have been populated.
mark_vmemmap_pages()marks the pages as vmemmap and sets some metadata:The current layout of the Vmemmap pages are:
[Head->refcount] : Nr sections used by this altmap [Head->private] : Nr of vmemmap pages [Tail->freelist] : Pointer to the head pageThis is done to easy the computation we need in some places. E.g:
Example 1)
We hot-add 1GB onx86_64(memory block 128MB) usingMHP_MEMMAP_DEVICE:
head->_refcount= 8 sectionshead->private= 4096 vmemmap pages
tail's->freelist = headExample 2)
We hot-add 1GB onx86_64usingMHP_MEMMAP_MEMBLOCK:[at the beginning of each memblock]
head->_refcount= 1 sectionhead->private= 512 vmemmap pages
tail's->freelist = head
Quoted 5 lines
We have the refcount because when using
MHP_MEMMAP_DEVICE, we need to know how much do we have to defer the call tovmemmap_free().
The thing is that the first pages of the hot-added range are used to create the memmap mapping, so we cannot remove those first, otherwise we would blow up when accessing the other pages.
So, assuming we add_memory(1GB, MHP_MEMMAP_DEVICE) and then remove_memory(128MB) of the added memory, this will work?
add_memory(8GB, MHP_MEMMAP_DEVICE)
For 8GB, we will need exactly 128MB of memmap if I did the math right. So exactly one section. This section will still be marked as being online (although not pages on it are actually online)?
Quoted 11 lines
What we do is that since when we hot-remove a memory-range, sections are being removed sequentially, we wait until we hit the last section, and then we free the hole range to
vmemmap_freebackwards.
We know that it is the last section because in every pass we decreasehead->_refcount, and when it reaches 0, we got our last section.We also have to be careful about those pages during online and offline operations. They are simply skipped, so online will keep them reserved and so unusable for any other purpose and offline ignores them so they do not block the offline operation.
I assume that they will still be dumped normally by user space. (as they are described by a "memory resource" and not PG_Offline)
Quoted 29 lines
One thing worth mention is that vmemmap pages residing in movable memory is not a show-stopper for that memory to be offlined/migrated away.
Vmemmap pages are just ignored in that case and they stick around until sections referred by those vmemmap pages are hot-removed.[1] https://patchwork.kernel.org/cover/10875017/
Oscar Salvador (5):
drivers/base/memory: Remove unneeded check in
remove_memory_block_devices
mm,memory_hotplug: IntroduceMHP_VMEMMAP_FLAGSmm,memory_hotplug: Introduce Vmemmap page helpers mm,memory_hotplug: allocate memmap from the added memory range for
sparse-vmemmap
mm,memory_hotplug: Allow userspace to enable/disable vmemmaparch/arm64/mm/mmu.c | 5 +- arch/powerpc/mm/init_64.c | 7 ++ arch/s390/mm/init.c | 6 ++ arch/x86/mm/init_64.c | 10 +++ drivers/acpi/acpi_memhotplug.c | 2 +- drivers/base/memory.c | 41 +++++++++-- drivers/dax/kmem.c | 2 +- drivers/hv/hv_balloon.c | 2 +- drivers/s390/char/sclp_cmd.c | 2 +- drivers/xen/balloon.c | 2 +- include/linux/memory_hotplug.h | 31 ++++++++- include/linux/memremap.h | 2 +-
Quoted 9 lines
include/linux/page-flags.h | 34 +++++++++ mm/compaction.c | 7 ++ mm/memory_hotplug.c | 152 ++++++++++++++++++++++++++++++++++------- mm/page_alloc.c | 22 +++++- mm/page_isolation.c | 14 +++- mm/sparse.c | 93 +++++++++++++++++++++++++ mm/util.c | 2 + 19 files changed, 394 insertions(+), 42 deletions(-)
Thanks for doing this, this will be very helpful :)
Signature · 3 lines
Thanks, David / dhildenb
Quoted 129 lines · David Hildenbrand
Quoted 22 lines · Oscar Salvador
Hi,
It has been while since I sent previous version [1].
In this version I added some feedback I got back then, like letting the caller decide whether he wants allocating per memory block or per memory range (patch#2), and having the chance to disable vmemmap when users want to expose all hotpluggable memory to userspace (patch#5).
[Testing]
While I could test last version on powerpc, and Huawei's fellows helped me out testing it on arm64, this time I could only test it on
x86_64. The codebase is quite the same, so I would not expect surprises.-
x86_64: small and large memblocks (128MB, 1G and 2G)
- Kernel module that adds memory spanning multiple memblocks and remove that memory in a different granularity.So far, only acpi memory hotplug uses the new flag. The other callers can be changed depending on their needs.
Quoted 8 lines
Of course, more testing and feedback is appreciated.
[Coverletter]
This is another step to make memory hotplug more usable. The primary goal of this patchset is to reduce memory overhead of the hot-added memory (at least for
SPARSEMEM_VMEMMAPmemory model). The current way we use to populate memmap (struct page array) has two main drawbacks:Mental note: How will it be handled if a caller specifies "Allocate memmap from hotadded memory", but we are running under SPARSEMEM where we can't do this.
Quoted 12 lines
a) it consumes an additional memory until the hotadded memory itself is onlined and
b) memmap might end up on a different numa node which is especially true formovable_nodeconfiguration.a) it is a problem especially for memory hotplug based memory "ballooning" solutions when the delay between physical memory hotplug and the onlining can lead to OOM and that led to introduction of hacks like auto onlining (see
31bc3858ea3e("memory-hotplug: add automatic onlining policy for the newly added memory")).Quoted 8 lines
b) can have performance drawbacks.
Another minor case is that I have seen hot-add operations failing on archs because they were running out of order-x pages.
E.g On powerpc, in certain configurations, we use order-8 pages, and given 64KB base pagesize, that is 16MB.
If we run out of those, we just fail the operation and we cannot add more memory.At least for SPARSEMEM, we fallback to
vmalloc()to work around this issue. I haven't looked into thepopulate_section_memmap()internals yet. Can you point me at the code that performs this allocation?Quoted 68 lines
We could fallback to base pages as
x86_64does, but we can do better.One way to mitigate all these issues is to simply allocate memmap array (which is the largest memory footprint of the physical memory hotplug) from the hot-added memory itself.
SPARSEMEM_VMEMMAPmemory model allows us to map any pfn range so the memory doesn't need to be online to be usable for the array. See patch 3 for more details.
This feature is only usable whenCONFIG_SPARSEMEM_VMEMMAPis set.[Overall design]:
Implementation wise we reuse
vmem_altmapinfrastructure to override the default allocator used byvmemap_populate. Once the memmap is allocated we need a way to mark altmap pfns used for the allocation. If MHP_MEMMAP_{DEVICE,MEMBLOCK} flag was passed, we set up the layout of the altmap structure at the beginning of__add_pages(), and then we callmark_vmemmap_pages().The flags are either
MHP_MEMMAP_DEVICEorMHP_MEMMAP_MEMBLOCK, and only differ in the way they allocate vmemmap pages within the memory blocks.
MHP_MEMMAP_MEMBLOCK:
- With this flag, we will allocate vmemmap pages in each memory block. This means that if we hot-add a range that spans multiple memory blocks, we will use the beginning of each memory block for the vmemmap pages. This strategy is good for cases where the caller wants the flexiblity to hot-remove memory in a different granularity than when it was added.
MHP_MEMMAP_DEVICE:
- With this flag, we will store all vmemmap pages at the beginning of hot-added memory.So it is a tradeoff of flexiblity vs contigous memory. More info on the above can be found in patch#2.
Depending on which flag is passed (
MHP_MEMMAP_DEVICEorMHP_MEMMAP_MEMBLOCK),mark_vmemmap_pages()gets called at a different stage.
WithMHP_MEMMAP_MEMBLOCK, we call it once we have populated the sections fitting in a single memblock, while withMHP_MEMMAP_DEVICEwe wait until all sections have been populated.
mark_vmemmap_pages()marks the pages as vmemmap and sets some metadata:The current layout of the Vmemmap pages are:
[Head->refcount] : Nr sections used by this altmap [Head->private] : Nr of vmemmap pages [Tail->freelist] : Pointer to the head pageThis is done to easy the computation we need in some places. E.g:
Example 1)
We hot-add 1GB onx86_64(memory block 128MB) usingMHP_MEMMAP_DEVICE:
head->_refcount= 8 sectionshead->private= 4096 vmemmap pages
tail's->freelist = headExample 2)
We hot-add 1GB onx86_64usingMHP_MEMMAP_MEMBLOCK:[at the beginning of each memblock]
head->_refcount= 1 sectionhead->private= 512 vmemmap pages
tail's->freelist = head
Quoted 8 lines
Quoted 5 lines
We have the refcount because when using
MHP_MEMMAP_DEVICE, we need to know how much do we have to defer the call tovmemmap_free().
The thing is that the first pages of the hot-added range are used to create the memmap mapping, so we cannot remove those first, otherwise we would blow up when accessing the other pages.So, assuming we
add_memory(1GB, MHP_MEMMAP_DEVICE)and thenremove_memory(128MB)of the added memory, this will work?
Hmm, I guess this won't work - especially when removing the first 128MB first, where the memmap resides.
Do we need MHP_MEMMAP_DEVICE at this point or could we start with MHP_MEMMAP_MEMBLOCK? That "smells" like being the easier case.
Signature · 3 lines
Thanks, David / dhildenb
Oscar Salvador
maintainerQuoted 6 lines · David Hildenbrand
Quoted 6 lines
[Coverletter]
This is another step to make memory hotplug more usable. The primary goal of this patchset is to reduce memory overhead of the hot-added memory (at least for
SPARSEMEM_VMEMMAPmemory model). The current way we use to populate memmap (struct page array) has two main drawbacks:
First off, thanks for looking into this :-)
Quoted 4 lines
Mental note: How will it be handled if a caller specifies "Allocate memmap from hotadded memory", but we are running under SPARSEMEM where we can't do this.
In add_memory_resource(), we have a call to mhp_check_correct_flags(), which is in charge of checking if the flags passed are compliant with our configuration among other things.
It also checks if both flags were passed (_MEMBLOCK|_DEVICE).
If a) any of the flags were specified and we are not on CONFIG_SPARSEMEM_VMEMMAP,
b) the flags are colliding with each other or c) the flags just do not make sense, we print out a warning and drop the flags to 0, so we just ignore them.
I just realized that I can adjust the check even more (something for the next version).
But to answer your question, flags are ignored under !CONFIG_SPARSEMEM_VMEMMAP.
Quoted 22 lines
Quoted 13 lines
a) it consumes an additional memory until the hotadded memory itself is onlined and
b) memmap might end up on a different numa node which is especially true formovable_nodeconfiguration.a) it is a problem especially for memory hotplug based memory "ballooning" solutions when the delay between physical memory hotplug and the onlining can lead to OOM and that led to introduction of hacks like auto onlining (see
31bc3858ea3e("memory-hotplug: add automatic onlining policy for the newly added memory")).Quoted 8 lines
b) can have performance drawbacks.
Another minor case is that I have seen hot-add operations failing on archs because they were running out of order-x pages.
E.g On powerpc, in certain configurations, we use order-8 pages, and given 64KB base pagesize, that is 16MB.
If we run out of those, we just fail the operation and we cannot add more memory.
Quoted 3 lines
At least for SPARSEMEM, we fallback to
vmalloc()to work around this issue. I haven't looked into thepopulate_section_memmap()internals yet. Can you point me at the code that performs this allocation?
Yes, on SPARSEMEM we first try to allocate the pages physical configuous, and then fallback to vmalloc.
This is because on CONFIG_SPARSEMEM memory model, the translations pfn_to_page/ page_to_pfn do not expect the memory to be contiguous.
But that is not the case on CONFIG_SPARSEMEM_VMEMMAP.
We do expect the memory to be physical contigous there, that is why a simply pfn_to_page/page_to_pfn is a matter of adding/substracting vmemmap/pfn.
Powerpc code is at:
https://elixir.bootlin.com/linux/v5.2-rc6/source/arch/powerpc/mm/init_64.c#L175
Quoted 2 lines
So, assuming we
add_memory(1GB, MHP_MEMMAP_DEVICE)and thenremove_memory(128MB)of the added memory, this will work?
No, MHP_MEMMAP_DEVICE is meant to be used when hot-adding and hot-removing work in the same granularity.
This is because all memmap pages will be stored at the beginning of the memory range.
Allowing hot-removing in a different granularity on MHP_MEMMAP_DEVICE would imply a lot of extra work.
For example, we would have to parse the vmemmap-head of the hot-removed range, and punch a hole in there to clear the vmemmap pages, and then be very carefull when deleting those pagetables.
So I followed Michal's advice, and I decided to let the caller specify if he either wants to allocate per memory block or per hot-added range(device). Where per memory block, allows us to do:
add_memory(1GB, MHP_MEMMAP_MEMBLOCK)remove_memory(128MB)
Quoted 5 lines
add_memory(8GB, MHP_MEMMAP_DEVICE)For 8GB, we will need exactly 128MB of memmap if I did the math right. So exactly one section. This section will still be marked as being online (although not pages on it are actually online)?
Yap, 8GB will fill the first section with vmemmap pages.
It will be marked as online, yes.
This is not to diverge too much from what we have right now, and starting treat some sections different than others.
E.g: Early sections that are used for memmap pages on early boot stage.
Quoted 7 lines
Quoted 7 lines
What we do is that since when we hot-remove a memory-range, sections are being removed sequentially, we wait until we hit the last section, and then we free the hole range to
vmemmap_freebackwards.
We know that it is the last section because in every pass we decreasehead->_refcount, and when it reaches 0, we got our last section.
Quoted 7 lines
Quoted 4 lines
We also have to be careful about those pages during online and offline operations. They are simply skipped, so online will keep them reserved and so unusable for any other purpose and offline ignores them so they do not block the offline operation.
I assume that they will still be dumped normally by user space. (as they are described by a "memory resource" and not
PG_Offline)
They are PG_Reserved.
Anyway, you mean by crash-tool?
Signature · 2 lines
Oscar Salvador SUSE L3
Quoted 9 lines · Oscar Salvador
Quoted 6 lines · David Hildenbrand
Quoted 6 lines
[Coverletter]
This is another step to make memory hotplug more usable. The primary goal of this patchset is to reduce memory overhead of the hot-added memory (at least for
SPARSEMEM_VMEMMAPmemory model). The current way we use to populate memmap (struct page array) has two main drawbacks:First off, thanks for looking into this :-)
Thanks for working on this ;)
Quoted 11 lines
Quoted 5 lines
Mental note: How will it be handled if a caller specifies "Allocate memmap from hotadded memory", but we are running under SPARSEMEM where we can't do this.
In
add_memory_resource(), we have a call tomhp_check_correct_flags(), which is in charge of checking if the flags passed are compliant with our configuration among other things.
It also checks if both flags were passed (_MEMBLOCK|_DEVICE).
Quoted 8 lines
If a) any of the flags were specified and we are not on
CONFIG_SPARSEMEM_VMEMMAP,
b) the flags are colliding with each other or c) the flags just do not make sense, we print out a warning and drop the flags to 0, so we just ignore them.I just realized that I can adjust the check even more (something for the next version).
But to answer your question, flags are ignored under !CONFIG_SPARSEMEM_VMEMMAP.
So it is indeed a hint only.
Quoted 27 lines
Quoted 23 lines
Quoted 14 lines
a) it consumes an additional memory until the hotadded memory itself is onlined and
b) memmap might end up on a different numa node which is especially true formovable_nodeconfiguration.a) it is a problem especially for memory hotplug based memory "ballooning" solutions when the delay between physical memory hotplug and the onlining can lead to OOM and that led to introduction of hacks like auto onlining (see
31bc3858ea3e("memory-hotplug: add automatic onlining policy for the newly added memory")).Quoted 8 lines
b) can have performance drawbacks.
Another minor case is that I have seen hot-add operations failing on archs because they were running out of order-x pages.
E.g On powerpc, in certain configurations, we use order-8 pages, and given 64KB base pagesize, that is 16MB.
If we run out of those, we just fail the operation and we cannot add more memory.Quoted 3 lines
At least for SPARSEMEM, we fallback to
vmalloc()to work around this issue. I haven't looked into thepopulate_section_memmap()internals yet. Can you point me at the code that performs this allocation?
Quoted 8 lines
Yes, on SPARSEMEM we first try to allocate the pages physical configuous, and then fallback to vmalloc.
This is because onCONFIG_SPARSEMEMmemory model, the translations pfn_to_page/page_to_pfndo not expect the memory to be contiguous.But that is not the case on
CONFIG_SPARSEMEM_VMEMMAP.
We do expect the memory to be physical contigous there, that is why a simply pfn_to_page/page_to_pfn is a matter of adding/substracting vmemmap/pfn.
Yeas, I explored that last week but didn't figure out where the actual vmmap population code resided - thanks :)
Quoted 20 lines
Powerpc code is at:
https://elixir.bootlin.com/linux/v5.2-rc6/source/arch/powerpc/mm/init_64.c#L175
Quoted 2 lines
So, assuming we
add_memory(1GB, MHP_MEMMAP_DEVICE)and thenremove_memory(128MB)of the added memory, this will work?No,
MHP_MEMMAP_DEVICEis meant to be used when hot-adding and hot-removing work in the same granularity.
This is because all memmap pages will be stored at the beginning of the memory range.
Allowing hot-removing in a different granularity onMHP_MEMMAP_DEVICEwould imply a lot of extra work.
For example, we would have to parse the vmemmap-head of the hot-removed range, and punch a hole in there to clear the vmemmap pages, and then be very carefull when deleting those pagetables.
Quoted 6 lines
So I followed Michal's advice, and I decided to let the caller specify if he either wants to allocate per memory block or per hot-added range(device). Where per memory block, allows us to do:
add_memory(1GB, MHP_MEMMAP_MEMBLOCK)remove_memory(128MB)
Back then, I already mentioned that we might have some users that remove_memory() they never added in a granularity it wasn't added. My concerns back then were never fully sorted out.
arch/powerpc/platforms/powernv/memtrace.c
- Will remove memory in memory block size chunks it never added
- What if that memory resides on a DIMM added via MHP_MEMMAP_DEVICE?
Will it at least bail out? Or simply break?
IOW: I am not yet 100% convinced that MHP_MEMMAP_DEVICE is save to be introduced.
Signature · 3 lines
Thanks, David / dhildenb
Oscar Salvador
maintainerQuoted 6 lines · David Hildenbrand
Back then, I already mentioned that we might have some users that
remove_memory()they never added in a granularity it wasn't added. My concerns back then were never fully sorted out.
arch/powerpc/platforms/powernv/memtrace.c
Quoted 7 lines
- Will remove memory in memory block size chunks it never added
- What if that memory resides on a DIMM added viaMHP_MEMMAP_DEVICE?Will it at least bail out? Or simply break?
IOW: I am not yet 100% convinced that
MHP_MEMMAP_DEVICEis save to be introduced.
Uhm, I will take a closer look and see if I can clear your concerns. TBH, I did not try to use arch/powerpc/platforms/powernv/memtrace.c yet.
I will get back to you once I tried it out.
Signature · 2 lines
Oscar Salvador SUSE L3
Oscar Salvador
maintainerQuoted 12 lines · Oscar Salvador
Quoted 11 lines · David Hildenbrand
Back then, I already mentioned that we might have some users that
remove_memory()they never added in a granularity it wasn't added. My concerns back then were never fully sorted out.
arch/powerpc/platforms/powernv/memtrace.c- Will remove memory in memory block size chunks it never added
- What if that memory resides on a DIMM added viaMHP_MEMMAP_DEVICE?Will it at least bail out? Or simply break?
Quoted 8 lines
Quoted 2 lines
IOW: I am not yet 100% convinced that
MHP_MEMMAP_DEVICEis save to be introduced.Uhm, I will take a closer look and see if I can clear your concerns. TBH, I did not try to use
arch/powerpc/platforms/powernv/memtrace.cyet.I will get back to you once I tried it out.
On a second though, it would be quite trivial to implement a check in remove_memory() that does not allow to remove memory used with MHP_MEMMAP_DEVICE in a different granularity:
+static bool check_vmemmap_granularity(u64 start, u64 size); +{
+ unsigned long pfn;
+ unsigned int nr_pages;
+ struct page *p;
+
+ pfn = PHYS_PFN(start);
+ p = pfn_to_page(pfn);
+ nr_pages = size >> PAGE_SIZE;
+
+ if (PageVmemmap(p)) {
+ struct page *h = vmemmap_get_head(p);
+ unsigned long sections = (unsigned long)h->private;
+
+ if (sections * PAGES_PER_SECTION > nr_pages)
+ fail;
+ }
+ no_fail;
+}
+
+
static int __ref try_remove_memory(int nid, u64 start, u64 size) {
int rc = 0;
BUG_ON(check_hotplug_memory_range(start, size));
mem_hotplug_begin();
+ rc = check_vmemmap_granularity(start, size);
+ if (rc)
+ goto done;
The above is quite hacky, but it gives an idea.
I will try the code from arch/powerpc/platforms/powernv/memtrace.c and see how can I implement a check.
Signature · 2 lines
Oscar Salvador SUSE L3
Quoted 60 lines · Oscar Salvador
Quoted 12 lines · Oscar Salvador
Quoted 11 lines · David Hildenbrand
Back then, I already mentioned that we might have some users that
remove_memory()they never added in a granularity it wasn't added. My concerns back then were never fully sorted out.
arch/powerpc/platforms/powernv/memtrace.c- Will remove memory in memory block size chunks it never added
- What if that memory resides on a DIMM added viaMHP_MEMMAP_DEVICE?Will it at least bail out? Or simply break?
Quoted 8 lines
Quoted 2 lines
IOW: I am not yet 100% convinced that
MHP_MEMMAP_DEVICEis save to be introduced.Uhm, I will take a closer look and see if I can clear your concerns. TBH, I did not try to use
arch/powerpc/platforms/powernv/memtrace.cyet.I will get back to you once I tried it out.
On a second though, it would be quite trivial to implement a check in
remove_memory()that does not allow to remove memory used withMHP_MEMMAP_DEVICEin a different granularity:(quoted diff) +24
-0+static bool check_vmemmap_granularity(u64 start, u64 size); +{ + unsigned long pfn; + unsigned int nr_pages; + struct page *p; + + pfn = PHYS_PFN(start); + p = pfn_to_page(pfn); + nr_pages = size >> PAGE_SIZE; + + if (PageVmemmap(p)) { + struct page *h = vmemmap_get_head(p); + unsigned long sections = (unsigned long)h->private; + + if (sections * PAGES_PER_SECTION > nr_pages) + fail; + } + no_fail; +} + + static int __ref try_remove_memory(int nid, u64 start, u64 size) { int rc = 0; BUG_ON(check_hotplug_memory_range(start, size)); mem_hotplug_begin(); + rc = check_vmemmap_granularity(start, size); + if (rc) + goto done;
Quoted 4 lines
The above is quite hacky, but it gives an idea.
I will try the code fromarch/powerpc/platforms/powernv/memtrace.cand see how can I implement a check.
Yeah, I would consider such a safety check mandatory for MHP_MEMMAP_DEVICE.
Signature · 3 lines
Thanks, David / dhildenb
Quoted 12 lines · Oscar Salvador
Quoted 11 lines · David Hildenbrand
Back then, I already mentioned that we might have some users that
remove_memory()they never added in a granularity it wasn't added. My concerns back then were never fully sorted out.
arch/powerpc/platforms/powernv/memtrace.c- Will remove memory in memory block size chunks it never added
- What if that memory resides on a DIMM added viaMHP_MEMMAP_DEVICE?Will it at least bail out? Or simply break?
Quoted 9 lines
Quoted 2 lines
IOW: I am not yet 100% convinced that
MHP_MEMMAP_DEVICEis save to be introduced.Uhm, I will take a closer look and see if I can clear your concerns. TBH, I did not try to use
arch/powerpc/platforms/powernv/memtrace.cyet.I will get back to you once I tried it out.
BTW, I consider the code in arch/powerpc/platforms/powernv/memtrace.c very ugly and dangerous. We should never allow to manually offline/online pages / hack into memory block states.
What I would want to see here is rather:
1. User space offlines the blocks to be used
2. memtrace installs a hotplug notifier and hinders the blocks it wants to use from getting onlined.
3. memory is not added/removed/onlined/offlined in memtrace code.
CCing the DEVs.
Signature · 3 lines
Thanks, David / dhildenb
Hi David,
Sorry for the late reply.
Quoted 24 lines · David Hildenbrand
Quoted 23 lines · Oscar Salvador
Quoted 11 lines · David Hildenbrand
Back then, I already mentioned that we might have some users that
remove_memory()they never added in a granularity it wasn't added. My
concerns back then were never fully sorted out.
arch/powerpc/platforms/powernv/memtrace.c- Will remove memory in memory block size chunks it never added
- What if that memory resides on a DIMM added viaMHP_MEMMAP_DEVICE?Quoted 5 lines
Will it at least bail out? Or simply break?
IOW: I am not yet 100% convinced that
MHP_MEMMAP_DEVICEis save to be
introduced.Uhm, I will take a closer look and see if I can clear your concerns.
TBH, I did not try to usearch/powerpc/platforms/powernv/memtrace.cyet.
Quoted 5 lines
Quoted 2 lines
I will get back to you once I tried it out.
BTW, I consider the code in
arch/powerpc/platforms/powernv/memtrace.cvery ugly and dangerous.
Yes it would be nice to clean this up.
Quoted 11 lines
We should never allow to manually offline/online pages / hack into memory block states.
What I would want to see here is rather:
1. User space offlines the blocks to be used
2. memtrace installs a hotplug notifier and hinders the blocks it wants
to use from getting onlined.
3. memory is not added/removed/onlined/offlined in memtrace code.
I remember looking into doing it a similar way. I can't recall the details but my issue was probably 'how does userspace indicate to the kernel that this memory being offlined should be removed'?
I don't know the mm code nor how the notifiers work very well so I can't quite see how the above would work. I'm assuming memtrace would register a hotplug notifier and when memory is offlined from userspace, the callback func in memtrace would be called if the priority was high enough? But how do we know that the memory being offlined is intended for usto touch? Is there a way to offline memory from userspace not using sysfs or have I missed something in the sysfs interface?
On a second read, perhaps you are assuming that memtrace is used after adding new memory at runtime? If so, that is not the case. If not, then would you be able to clarify what I'm not seeing?
Thanks.
Quoted 2 lines
CCing the DEVs.
Oscar Salvador
maintainerQuoted 61 lines · Rashmica Gupta
Hi David,
Sorry for the late reply.
Quoted 24 lines · David Hildenbrand
Quoted 23 lines · Oscar Salvador
Quoted 11 lines · David Hildenbrand
Back then, I already mentioned that we might have some users that
remove_memory()they never added in a granularity it wasn't added. My
concerns back then were never fully sorted out.
arch/powerpc/platforms/powernv/memtrace.c- Will remove memory in memory block size chunks it never added
- What if that memory resides on a DIMM added viaMHP_MEMMAP_DEVICE?Quoted 5 lines
Will it at least bail out? Or simply break?
IOW: I am not yet 100% convinced that
MHP_MEMMAP_DEVICEis save to be
introduced.Uhm, I will take a closer look and see if I can clear your concerns.
TBH, I did not try to usearch/powerpc/platforms/powernv/memtrace.cyet.Quoted 5 lines
Quoted 2 lines
I will get back to you once I tried it out.
BTW, I consider the code in
arch/powerpc/platforms/powernv/memtrace.cvery ugly and dangerous.Yes it would be nice to clean this up.
Quoted 11 lines
We should never allow to manually offline/online pages / hack into memory block states.
What I would want to see here is rather:
1. User space offlines the blocks to be used
2. memtrace installs a hotplug notifier and hinders the blocks it wants
to use from getting onlined.
3. memory is not added/removed/onlined/offlined in memtrace code.I remember looking into doing it a similar way. I can't recall the details but my issue was probably 'how does userspace indicate to the kernel that this memory being offlined should be removed'?
I don't know the mm code nor how the notifiers work very well so I can't quite see how the above would work. I'm assuming memtrace would register a hotplug notifier and when memory is offlined from userspace, the callback func in memtrace would be called if the priority was high enough? But how do we know that the memory being offlined is intended for usto touch? Is there a way to offline memory from userspace not using sysfs or have I missed something in the sysfs interface?
Quoted 3 lines
On a second read, perhaps you are assuming that memtrace is used after adding new memory at runtime? If so, that is not the case. If not, then would you be able to clarify what I'm not seeing?
Hi Rashmica,
let us go the easy way here.
Could you please explain:
1) How memtrace works
2) Why it was designed, what is the goal of the interface?
3) When it is supposed to be used?
I have seen a couple of reports in the past from people running memtrace and failing to do so sometimes, and back then I could not grasp why people was using it, or under which circumstances was nice to have.
So it would be nice to have a detailed explanation from the person who wrote it.
Thanks
Signature · 2 lines
Oscar Salvador SUSE L3
Quoted 62 lines · Oscar Salvador
Quoted 61 lines · Rashmica Gupta
Hi David,
Sorry for the late reply.
Quoted 24 lines · David Hildenbrand
Quoted 23 lines · Oscar Salvador
Quoted 11 lines · David Hildenbrand
Back then, I already mentioned that we might have some users that
remove_memory()they never added in a granularity it wasn't added. My
concerns back then were never fully sorted out.
arch/powerpc/platforms/powernv/memtrace.c- Will remove memory in memory block size chunks it never added
- What if that memory resides on a DIMM added viaMHP_MEMMAP_DEVICE?Quoted 5 lines
Will it at least bail out? Or simply break?
IOW: I am not yet 100% convinced that
MHP_MEMMAP_DEVICEis save to be
introduced.Uhm, I will take a closer look and see if I can clear your concerns.
TBH, I did not try to usearch/powerpc/platforms/powernv/memtrace.cyet.Quoted 5 lines
Quoted 2 lines
I will get back to you once I tried it out.
BTW, I consider the code in
arch/powerpc/platforms/powernv/memtrace.cvery ugly and dangerous.Yes it would be nice to clean this up.
Quoted 11 lines
We should never allow to manually offline/online pages / hack into memory block states.
What I would want to see here is rather:
1. User space offlines the blocks to be used
2. memtrace installs a hotplug notifier and hinders the blocks it wants
to use from getting onlined.
3. memory is not added/removed/onlined/offlined in memtrace code.I remember looking into doing it a similar way. I can't recall the details but my issue was probably 'how does userspace indicate to the kernel that this memory being offlined should be removed'?
I don't know the mm code nor how the notifiers work very well so I can't quite see how the above would work. I'm assuming memtrace would register a hotplug notifier and when memory is offlined from userspace, the callback func in memtrace would be called if the priority was high enough? But how do we know that the memory being offlined is intended for usto touch? Is there a way to offline memory from userspace not using sysfs or have I missed something in the sysfs interface?
Quoted 10 lines
Quoted 3 lines
On a second read, perhaps you are assuming that memtrace is used after adding new memory at runtime? If so, that is not the case. If not, then would you be able to clarify what I'm not seeing?
Hi Rashmica,
let us go the easy way here.
Could you please explain:
Sure!
Quoted 2 lines
1) How memtrace works
You write the size of the chunk of memory you want into the debugfs file
and memtrace will attempt to find a contiguous section of memory of that size
that can be offlined. If it finds that, then the memory is removed from the kernel's mappings. If you want a different size, then you write that to the debugsfs file and memtrace will re-add the memory it first removed and then try to offline and remove the a chunk of the new size.
Quoted 4 lines
2) Why it was designed, what is the goal of the interface?
3) When it is supposed to be used?
There is a hardware debugging facility (htm) on some power chips. To use this you need a contiguous portion of memory for the output to be dumped to - and we obviously don't want this memory to be simultaneously used by the kernel.
At boot time we can portion off a section of memory for this (and not tell the
kernel about it), but sometimes you want to be able to use the hardware debugging facilities and you haven't done this and you don't want to reboot your machine - and memtrace is the solution for this.
If you're curious one tool that uses this debugging facility is here:
https://github.com/open-power/pdbg. Relevant files are libpdbg/htm.c and src/htm.c.
I have seen a couple of reports in the past from people running memtrace
Quoted 7 lines
and failing to do so sometimes, and back then I could not grasp why people was using it, or under which circumstances was nice to have. So it would be nice to have a detailed explanation from the person who wrote
it.
Is that enough detail?
Quoted 6 lines
Thanks
--
Oscar Salvador
SUSE L3
Woops, looks like my phone doesn't send plain text emails :/
Quoted 123 lines · Rashmica Gupta
Quoted 63 lines · Oscar Salvador
Quoted 61 lines · Rashmica Gupta
Hi David,
Sorry for the late reply.
Quoted 24 lines · David Hildenbrand
Quoted 23 lines · Oscar Salvador
Quoted 11 lines · David Hildenbrand
Back then, I already mentioned that we might have some users that
remove_memory()they never added in a granularity it wasn't added. My
concerns back then were never fully sorted out.
arch/powerpc/platforms/powernv/memtrace.c- Will remove memory in memory block size chunks it never added
- What if that memory resides on a DIMM added viaMHP_MEMMAP_DEVICE?Quoted 5 lines
Will it at least bail out? Or simply break?
IOW: I am not yet 100% convinced that
MHP_MEMMAP_DEVICEis save to be
introduced.Uhm, I will take a closer look and see if I can clear your concerns.
TBH, I did not try to usearch/powerpc/platforms/powernv/memtrace.cyet.Quoted 5 lines
Quoted 2 lines
I will get back to you once I tried it out.
BTW, I consider the code in
arch/powerpc/platforms/powernv/memtrace.cvery ugly and dangerous.Yes it would be nice to clean this up.
Quoted 11 lines
We should never allow to manually offline/online pages / hack into memory block states.
What I would want to see here is rather:
1. User space offlines the blocks to be used
2. memtrace installs a hotplug notifier and hinders the blocks it wants
to use from getting onlined.
3. memory is not added/removed/onlined/offlined in memtrace code.I remember looking into doing it a similar way. I can't recall the details but my issue was probably 'how does userspace indicate to the kernel that this memory being offlined should be removed'?
I don't know the mm code nor how the notifiers work very well so I can't quite see how the above would work. I'm assuming memtrace would register a hotplug notifier and when memory is offlined from userspace, the callback func in memtrace would be called if the priority was high enough? But how do we know that the memory being offlined is intended for usto touch? Is there a way to offline memory from userspace not using sysfs or have I missed something in the sysfs interface?
Quoted 9 lines
Quoted 3 lines
On a second read, perhaps you are assuming that memtrace is used after adding new memory at runtime? If so, that is not the case. If not, then would you be able to clarify what I'm not seeing?
Hi Rashmica,
let us go the easy way here.
Could you please explain:Sure!
Quoted 2 lines
1) How memtrace works
You write the size of the chunk of memory you want into the debugfs file
and memtrace will attempt to find a contiguous section of memory of that size that can be offlined. If it finds that, then the memory is removed from the kernel's mappings. If you want a different size, then you write that to the debugsfs file and memtrace will re-add the memory it first removed and then try to offline and remove the a chunk of the new size.Quoted 4 lines
2) Why it was designed, what is the goal of the interface?
3) When it is supposed to be used?There is a hardware debugging facility (htm) on some power chips. To use this you need a contiguous portion of memory for the output to be dumped to - and we obviously don't want this memory to be simultaneously used by the kernel.
At boot time we can portion off a section of memory for this (and not tell the kernel about it), but sometimes you want to be able to use the hardware debugging facilities and you haven't done this and you don't want to reboot your machine - and memtrace is the solution for this.
If you're curious one tool that uses this debugging facility is here:
https://github.com/open-power/pdbg. Relevant files arelibpdbg/htm.candsrc/htm.c.Quoted 6 lines
I have seen a couple of reports in the past from people running memtrace and failing to do so sometimes, and back then I could not grasp why people was using it, or under which circumstances was nice to have.
So it would be nice to have a detailed explanation from the person who wrote it.Is that enough detail?
Quoted 6 lines
Thanks
--
Oscar Salvador
SUSE L3
On Tue 02-07-19 18:52:01, Rashmica Gupta wrote:
[...]
Quoted 8 lines
Quoted 4 lines
2) Why it was designed, what is the goal of the interface?
3) When it is supposed to be used?There is a hardware debugging facility (htm) on some power chips. To use this you need a contiguous portion of memory for the output to be dumped to - and we obviously don't want this memory to be simultaneously used by the kernel.
How much memory are we talking about here? Just curious.
Signature · 2 lines
Michal Hocko SUSE Labs
Quoted 14 lines · Michal Hocko
On Tue 02-07-19 18:52:01, Rashmica Gupta wrote:
[...]Quoted 11 lines
Quoted 4 lines
2) Why it was designed, what is the goal of the interface?
3) When it is supposed to be used?There is a hardware debugging facility (htm) on some power chips. To use
this you need a contiguous portion of memory for the output to be dumped
to - and we obviously don't want this memory to be simultaneously used by
the kernel.
Quoted 1 line
How much memory are we talking about here? Just curious.
From what I've seen a couple of GB per node, so maybe 2-10GB total.
Quoted 15 lines · Rashmica Gupta
Quoted 14 lines · Michal Hocko
On Tue 02-07-19 18:52:01, Rashmica Gupta wrote:
[...]Quoted 11 lines
Quoted 4 lines
2) Why it was designed, what is the goal of the interface?
3) When it is supposed to be used?There is a hardware debugging facility (htm) on some power chips. To use
this you need a contiguous portion of memory for the output to be dumped
to - and we obviously don't want this memory to be simultaneously used by
the kernel.
Quoted 3 lines
Quoted 1 line
How much memory are we talking about here? Just curious.
From what I've seen a couple of GB per node, so maybe 2-10GB total.
OK, that is really a lot to keep around unused just in case the debugging is going to be used.
I am still not sure the current approach of (ab)using memory hotplug is ideal. Sure there is some overlap but you shouldn't really need to offline the required memory range at all. All you need is to isolate the memory from any existing user and the page allocator. Have you checked alloc_contig_range?
Signature · 2 lines
Michal Hocko SUSE Labs
Quoted 20 lines · Michal Hocko
Quoted 15 lines · Rashmica Gupta
Quoted 14 lines · Michal Hocko
On Tue 02-07-19 18:52:01, Rashmica Gupta wrote:
[...]Quoted 11 lines
Quoted 4 lines
2) Why it was designed, what is the goal of the interface?
3) When it is supposed to be used?There is a hardware debugging facility (htm) on some power chips. To use
this you need a contiguous portion of memory for the output to be dumped
to - and we obviously don't want this memory to be simultaneously used by
the kernel.Quoted 3 lines
Quoted 1 line
How much memory are we talking about here? Just curious.
From what I've seen a couple of GB per node, so maybe 2-10GB total.
Quoted 9 lines
OK, that is really a lot to keep around unused just in case the debugging is going to be used.
I am still not sure the current approach of (ab)using memory hotplug is ideal. Sure there is some overlap but you shouldn't really need to offline the required memory range at all. All you need is to isolate the memory from any existing user and the page allocator. Have you checked
alloc_contig_range?
Rashmica mentioned somewhere in this thread that the virtual mapping must not be in place, otherwise the HW might prefetch some of this memory, leading to errors with memtrace (which checks that in HW).
Signature · 3 lines
Thanks, David / dhildenb
Quoted 31 lines · David Hildenbrand
Quoted 20 lines · Michal Hocko
Quoted 15 lines · Rashmica Gupta
Quoted 14 lines · Michal Hocko
On Tue 02-07-19 18:52:01, Rashmica Gupta wrote:
[...]Quoted 11 lines
Quoted 4 lines
2) Why it was designed, what is the goal of the interface?
3) When it is supposed to be used?There is a hardware debugging facility (htm) on some power chips. To use
this you need a contiguous portion of memory for the output to be dumped
to - and we obviously don't want this memory to be simultaneously used by
the kernel.Quoted 3 lines
Quoted 1 line
How much memory are we talking about here? Just curious.
From what I've seen a couple of GB per node, so maybe 2-10GB total.
Quoted 9 lines
OK, that is really a lot to keep around unused just in case the debugging is going to be used.
I am still not sure the current approach of (ab)using memory hotplug is ideal. Sure there is some overlap but you shouldn't really need to offline the required memory range at all. All you need is to isolate the memory from any existing user and the page allocator. Have you checked
alloc_contig_range?
Quoted 3 lines
Rashmica mentioned somewhere in this thread that the virtual mapping must not be in place, otherwise the HW might prefetch some of this memory, leading to errors with memtrace (which checks that in HW).
Does anything prevent from unmapping the pfn range from the direct mapping?
Signature · 2 lines
Michal Hocko SUSE Labs
Quoted 32 lines · Michal Hocko
Quoted 31 lines · David Hildenbrand
Quoted 29 lines · Michal Hocko
Quoted 15 lines · Rashmica Gupta
Quoted 14 lines · Michal Hocko
On Tue 02-07-19 18:52:01, Rashmica Gupta wrote:
[...]Quoted 11 lines
Quoted 4 lines
2) Why it was designed, what is the goal of the interface?
3) When it is supposed to be used?There is a hardware debugging facility (htm) on some power chips. To use
this you need a contiguous portion of memory for the output to be dumped
to - and we obviously don't want this memory to be simultaneously used by
the kernel.Quoted 3 lines
Quoted 1 line
How much memory are we talking about here? Just curious.
From what I've seen a couple of GB per node, so maybe 2-10GB total.
OK, that is really a lot to keep around unused just in case the debugging is going to be used.
I am still not sure the current approach of (ab)using memory hotplug is ideal. Sure there is some overlap but you shouldn't really need to offline the required memory range at all. All you need is to isolate the memory from any existing user and the page allocator. Have you checked
alloc_contig_range?
Quoted 6 lines
Quoted 3 lines
Rashmica mentioned somewhere in this thread that the virtual mapping must not be in place, otherwise the HW might prefetch some of this memory, leading to errors with memtrace (which checks that in HW).
Does anything prevent from unmapping the pfn range from the direct mapping?
I am not sure about the implications of having pfn_valid()/pfn_present()/pfn_online() return true but accessing it results in crashes. (suspend, kdump, whatever other technology touches online memory)
(sounds more like a hack to me than just going ahead and removing/readding the memory via a clean interface we have)
Signature · 3 lines
Thanks, David / dhildenb
Quoted 37 lines · David Hildenbrand
Quoted 36 lines · Michal Hocko
Quoted 34 lines · David Hildenbrand
Quoted 20 lines · Michal Hocko
Quoted 15 lines · Rashmica Gupta
Quoted 14 lines · Michal Hocko
On Tue 02-07-19 18:52:01, Rashmica Gupta wrote:
[...]Quoted 11 lines
Quoted 4 lines
2) Why it was designed, what is the goal of the interface?
3) When it is supposed to be used?There is a hardware debugging facility (htm) on some power chips. To use
this you need a contiguous portion of memory for the output to be dumped
to - and we obviously don't want this memory to be simultaneously used by
the kernel.Quoted 3 lines
Quoted 1 line
How much memory are we talking about here? Just curious.
From what I've seen a couple of GB per node, so maybe 2-10GB total.
Quoted 9 lines
OK, that is really a lot to keep around unused just in case the debugging is going to be used.
I am still not sure the current approach of (ab)using memory hotplug is ideal. Sure there is some overlap but you shouldn't really need to offline the required memory range at all. All you need is to isolate the memory from any existing user and the page allocator. Have you checked
alloc_contig_range?Rashmica mentioned somewhere in this thread that the virtual mapping must not be in place, otherwise the HW might prefetch some of this memory, leading to errors with memtrace (which checks that in HW).
Quoted 7 lines
Quoted 2 lines
Does anything prevent from unmapping the pfn range from the direct mapping?
I am not sure about the implications of having pfn_valid()/pfn_present()/pfn_online() return true but accessing it results in crashes. (suspend, kdump, whatever other technology touches online memory)
(oneidea: we could of course go ahead and mark the pages PG_offline before unmapping the pfn range to work around these issues)
Quoted 4 lines
(sounds more like a hack to me than just going ahead and removing/readding the memory via a clean interface we have)
Signature · 3 lines
Thanks, David / dhildenb
Quoted 1 line · David Hildenbrand
On 01.08.19 09:26, David Hildenbrand wrote:
[...]
Quoted 7 lines
Quoted 4 lines
I am not sure about the implications of having pfn_valid()/pfn_present()/pfn_online() return true but accessing it results in crashes. (suspend, kdump, whatever other technology touches online memory)
(oneidea: we could of course go ahead and mark the pages
PG_offlinebefore unmapping the pfn range to work around these issues)
PG_reserved and an elevated reference count should be enough to drive any pfn walker out. Pfn walkers shouldn't touch any page unless they know and recognize their type.
Signature · 2 lines
Michal Hocko SUSE Labs
Quoted 8 lines · Michal Hocko
Quoted 1 line · David Hildenbrand
On 01.08.19 09:26, David Hildenbrand wrote:
[...]
Quoted 5 lines
Quoted 4 lines
I am not sure about the implications of having pfn_valid()/pfn_present()/pfn_online() return true but accessing it results in crashes. (suspend, kdump, whatever other technology touches online memory)
Quoted 6 lines
Quoted 2 lines
(oneidea: we could of course go ahead and mark the pages
PG_offlinebefore unmapping the pfn range to work around these issues)
PG_reservedand an elevated reference count should be enough to drive any pfn walker out. Pfn walkers shouldn't touch any page unless they know and recognize their type.
Btw. this shouldn't be much different from DEBUG_PAGE_ALLOC in principle. The memory is valid, but not mapped to the kernel virtual space. Nobody should be really touching it anyway.
Signature · 2 lines
Michal Hocko SUSE Labs
Quoted 12 lines · Michal Hocko
Quoted 11 lines · Michal Hocko
Quoted 1 line · David Hildenbrand
On 01.08.19 09:26, David Hildenbrand wrote:
[...]
Quoted 7 lines
Quoted 4 lines
I am not sure about the implications of having pfn_valid()/pfn_present()/pfn_online() return true but accessing it results in crashes. (suspend, kdump, whatever other technology touches online memory)
(oneidea: we could of course go ahead and mark the pages
PG_offlinebefore unmapping the pfn range to work around these issues)
Quoted 8 lines
Quoted 3 lines
PG_reservedand an elevated reference count should be enough to drive any pfn walker out. Pfn walkers shouldn't touch any page unless they know and recognize their type.Btw. this shouldn't be much different from
DEBUG_PAGE_ALLOCin principle. The memory is valid, but not mapped to the kernel virtual space. Nobody should be really touching it anyway.
I guess that could work (I am happy with anything that gets rid of offline_pages()/device_online() here :D ).
So for each node, alloc_contig_range() (if I remember correctly, all pages in the range have to be in the same zone), set them PG_reserved (+ maybe something else, we'll have to see). Then, unmap them.
The reverse when freeing the memory. Guess this should leave the current user space interface unmodified.
I can see that guard pages use a special page type (PageGuard), not sure if something like that is really required. We'll have to see.
Signature · 3 lines
Thanks, David / dhildenb
Quoted 37 lines · David Hildenbrand
Quoted 36 lines · Michal Hocko
Quoted 34 lines · David Hildenbrand
Quoted 20 lines · Michal Hocko
Quoted 15 lines · Rashmica Gupta
Quoted 14 lines · Michal Hocko
On Tue 02-07-19 18:52:01, Rashmica Gupta wrote:
[...]Quoted 11 lines
Quoted 4 lines
2) Why it was designed, what is the goal of the interface?
3) When it is supposed to be used?There is a hardware debugging facility (htm) on some power chips. To use
this you need a contiguous portion of memory for the output to be dumped
to - and we obviously don't want this memory to be simultaneously used by
the kernel.Quoted 3 lines
Quoted 1 line
How much memory are we talking about here? Just curious.
From what I've seen a couple of GB per node, so maybe 2-10GB total.
Quoted 9 lines
OK, that is really a lot to keep around unused just in case the debugging is going to be used.
I am still not sure the current approach of (ab)using memory hotplug is ideal. Sure there is some overlap but you shouldn't really need to offline the required memory range at all. All you need is to isolate the memory from any existing user and the page allocator. Have you checked
alloc_contig_range?Rashmica mentioned somewhere in this thread that the virtual mapping must not be in place, otherwise the HW might prefetch some of this memory, leading to errors with memtrace (which checks that in HW).
Quoted 7 lines
Quoted 2 lines
Does anything prevent from unmapping the pfn range from the direct mapping?
I am not sure about the implications of having pfn_valid()/pfn_present()/pfn_online() return true but accessing it results in crashes. (suspend, kdump, whatever other technology touches online memory)
If those pages are marked as Reserved then nobody should be touching them anyway.
Quoted 2 lines
(sounds more like a hack to me than just going ahead and removing/readding the memory via a clean interface we have)
Right, but the interface that we have is quite restricted in what it can really offline.
Signature · 2 lines
Michal Hocko SUSE Labs
Quoted 41 lines · Michal Hocko
Quoted 40 lines · David Hildenbrand
Quoted 38 lines · Michal Hocko
Quoted 31 lines · David Hildenbrand
Quoted 20 lines · Michal Hocko
Quoted 15 lines · Rashmica Gupta
Quoted 14 lines · Michal Hocko
On Tue 02-07-19 18:52:01, Rashmica Gupta wrote:
[...]Quoted 11 lines
Quoted 4 lines
2) Why it was designed, what is the goal of the interface?
3) When it is supposed to be used?There is a hardware debugging facility (htm) on some power chips. To use
this you need a contiguous portion of memory for the output to be dumped
to - and we obviously don't want this memory to be simultaneously used by
the kernel.Quoted 3 lines
Quoted 1 line
How much memory are we talking about here? Just curious.
From what I've seen a couple of GB per node, so maybe 2-10GB total.
Quoted 9 lines
OK, that is really a lot to keep around unused just in case the debugging is going to be used.
I am still not sure the current approach of (ab)using memory hotplug is ideal. Sure there is some overlap but you shouldn't really need to offline the required memory range at all. All you need is to isolate the memory from any existing user and the page allocator. Have you checked
alloc_contig_range?Quoted 3 lines
Rashmica mentioned somewhere in this thread that the virtual mapping must not be in place, otherwise the HW might prefetch some of this memory, leading to errors with memtrace (which checks that in HW).
Does anything prevent from unmapping the pfn range from the direct mapping?
Quoted 7 lines
Quoted 4 lines
I am not sure about the implications of having pfn_valid()/pfn_present()/pfn_online() return true but accessing it results in crashes. (suspend, kdump, whatever other technology touches online memory)
If those pages are marked as Reserved then nobody should be touching them anyway.
Which is not true as I remember we already discussed - I even documented what PG_reserved can mean after that discussion in page-flags.h (e.g., memmap of boot memory) - that's why we introduced PG_offline after all.
Signature · 3 lines
Thanks, David / dhildenb
Quoted 47 lines · David Hildenbrand
Quoted 46 lines · Michal Hocko
Quoted 44 lines · David Hildenbrand
Quoted 32 lines · Michal Hocko
Quoted 31 lines · David Hildenbrand
Quoted 29 lines · Michal Hocko
Quoted 15 lines · Rashmica Gupta
Quoted 14 lines · Michal Hocko
On Tue 02-07-19 18:52:01, Rashmica Gupta wrote:
[...]Quoted 11 lines
Quoted 4 lines
2) Why it was designed, what is the goal of the interface?
3) When it is supposed to be used?There is a hardware debugging facility (htm) on some power chips. To use
this you need a contiguous portion of memory for the output to be dumped
to - and we obviously don't want this memory to be simultaneously used by
the kernel.Quoted 3 lines
Quoted 1 line
How much memory are we talking about here? Just curious.
From what I've seen a couple of GB per node, so maybe 2-10GB total.
OK, that is really a lot to keep around unused just in case the debugging is going to be used.
I am still not sure the current approach of (ab)using memory hotplug is ideal. Sure there is some overlap but you shouldn't really need to offline the required memory range at all. All you need is to isolate the memory from any existing user and the page allocator. Have you checked
alloc_contig_range?Quoted 6 lines
Quoted 3 lines
Rashmica mentioned somewhere in this thread that the virtual mapping must not be in place, otherwise the HW might prefetch some of this memory, leading to errors with memtrace (which checks that in HW).
Does anything prevent from unmapping the pfn range from the direct mapping?
I am not sure about the implications of having pfn_valid()/pfn_present()/pfn_online() return true but accessing it results in crashes. (suspend, kdump, whatever other technology touches online memory)
Quoted 6 lines
Quoted 2 lines
If those pages are marked as Reserved then nobody should be touching them anyway.
Which is not true as I remember we already discussed - I even documented what
PG_reservedcan mean after that discussion inpage-flags.h(e.g., memmap of boot memory) - that's why we introducedPG_offlineafter all.
Sorry, my statement was imprecise. What I meant is what we have documented:
* PG_reserved is set for special pages. The "struct page" of such a page
* should in general not be touched (e.g. set dirty) except by its owner.
the owner part is important.
Signature · 2 lines
Michal Hocko SUSE Labs
Quoted 3 lines · Rashmica Gupta
Hi David,
Sorry for the late reply.
Hi,
sorry I was on PTO :)
Quoted 46 lines · David Hildenbrand
Quoted 24 lines · Oscar Salvador
Quoted 23 lines · David Hildenbrand
Quoted 11 lines
Back then, I already mentioned that we might have some users that
remove_memory()they never added in a granularity it wasn't added. My
concerns back then were never fully sorted out.
arch/powerpc/platforms/powernv/memtrace.c- Will remove memory in memory block size chunks it never added
- What if that memory resides on a DIMM added viaMHP_MEMMAP_DEVICE?Quoted 5 lines
Will it at least bail out? Or simply break?
IOW: I am not yet 100% convinced that
MHP_MEMMAP_DEVICEis save to be
introduced.Uhm, I will take a closer look and see if I can clear your concerns.
TBH, I did not try to usearch/powerpc/platforms/powernv/memtrace.cyet.Quoted 5 lines
Quoted 2 lines
I will get back to you once I tried it out.
BTW, I consider the code in
arch/powerpc/platforms/powernv/memtrace.cvery ugly and dangerous.Yes it would be nice to clean this up.
Quoted 11 lines
We should never allow to manually offline/online pages / hack into memory block states.
What I would want to see here is rather:
1. User space offlines the blocks to be used
2. memtrace installs a hotplug notifier and hinders the blocks it wants
to use from getting onlined.
3. memory is not added/removed/onlined/offlined in memtrace code.
Quoted 3 lines
I remember looking into doing it a similar way. I can't recall the details but my issue was probably 'how does userspace indicate to the kernel that this memory being offlined should be removed'?
Instead of indicating a "size", indicate the offline memory blocks that the driver should use. E.g. by memory block id for each node
0:20-24,1:30-32
Of course, other interfaces might make sense.
You can then start using these memory blocks and hinder them from getting onlined (as a safety net) via memory notifiers.
That would at least avoid you having to call add_memory/remove_memory/offline_pages/device_online/modifying memblock states manually.
(binding the memory block devices to a driver would be nicer, but the infrastructure is not really there yet - we have no such drivers in place yet)
Quoted 8 lines
I don't know the mm code nor how the notifiers work very well so I can't quite see how the above would work. I'm assuming memtrace would register a hotplug notifier and when memory is offlined from userspace, the callback func in memtrace would be called if the priority was high enough? But how do we know that the memory being offlined is intended for usto touch? Is there a way to offline memory from userspace not using sysfs or have I missed something in the sysfs interface?
The notifier would really only be used to hinder onlining as a safety net. User space prepares (offlines) the memory blocks and then tells the drivers which memory blocks to use.
Quoted 4 lines
On a second read, perhaps you are assuming that memtrace is used after adding new memory at runtime? If so, that is not the case. If not, then would you be able to clarify what I'm not seeing?
The main problem I see is that you are calling add_memory/remove_memory() on memory your device driver doesn't own. It could reside on a DIMM if I am not mistaking (or later on paravirtualized memory devices like virtio-mem if I ever get to implement them ;) ).
How is it guaranteed that the memory you are allocating does not reside on a DIMM for example added via add_memory() by the ACPI driver?
Signature · 3 lines
Thanks, David / dhildenb
Quoted 72 lines · David Hildenbrand
Quoted 3 lines · Rashmica Gupta
Hi David,
Sorry for the late reply.
Hi,
sorry I was on PTO :)
Quoted 51 lines · David Hildenbrand
Quoted 29 lines · Oscar Salvador
Quoted 28 lines
Quoted 13 lines · David Hildenbrand
Back then, I already mentioned that we might have some users that
remove_memory()they never added in a granularity it wasn't added. My
concerns back then were never fully sorted out.
arch/powerpc/platforms/powernv/memtrace.c- Will remove memory in memory block size chunks it never added
- What if that memory resides on a DIMM added viaMHP_MEMMAP_DEVICE?Quoted 6 lines
Will it at least bail out? Or simply break?
IOW: I am not yet 100% convinced that
MHP_MEMMAP_DEVICEis save
to be
introduced.Uhm, I will take a closer look and see if I can clear your concerns.
TBH, I did not try to usearch/powerpc/platforms/powernv/memtrace.c
yet.Quoted 6 lines
Quoted 2 lines
I will get back to you once I tried it out.
BTW, I consider the code in
arch/powerpc/platforms/powernv/memtrace.cvery ugly and dangerous.Yes it would be nice to clean this up.
Quoted 11 lines
We should never allow to manually offline/online pages / hack into memory block states.
What I would want to see here is rather:
1. User space offlines the blocks to be used
2. memtrace installs a hotplug notifier and hinders the blocks it wants
to use from getting onlined.
3. memory is not added/removed/onlined/offlined in memtrace code.Quoted 3 lines
I remember looking into doing it a similar way. I can't recall the details but my issue was probably 'how does userspace indicate to the kernel that this memory being offlined should be removed'?
Instead of indicating a "size", indicate the offline memory blocks that
the driver should use. E.g. by memory block id for each node0:20-24,1:30-32
Of course, other interfaces might make sense.
Quoted 7 lines
You can then start using these memory blocks and hinder them from getting onlined (as a safety net) via memory notifiers.
That would at least avoid you having to call add_memory/remove_memory/offline_pages/device_online/modifying memblock
states manually.
I see what you're saying and that definitely sounds safer.
We would still need to call remove_memory and add_memory from memtrace as
just offlining memory doesn't remove it from the linear page tables (if
it's still in the page tables then hardware can prefetch it and if hardware tracing is using it then the box checkstops).
Quoted 28 lines
(binding the memory block devices to a driver would be nicer, but the infrastructure is not really there yet - we have no such drivers in place yet)
Quoted 11 lines
I don't know the mm code nor how the notifiers work very well so I can't quite see how the above would work. I'm assuming memtrace would
register a hotplug notifier and when memory is offlined from userspace,
the callback func in memtrace would be called if the priority was high
enough? But how do we know that the memory being offlined is intended
for usto touch? Is there a way to offline memory from userspace not using sysfs or have I missed something in the sysfs interface?The notifier would really only be used to hinder onlining as a safety net. User space prepares (offlines) the memory blocks and then tells the
drivers which memory blocks to use.Quoted 5 lines
On a second read, perhaps you are assuming that memtrace is used after
adding new memory at runtime? If so, that is not the case. If not, then
would you be able to clarify what I'm not seeing?
Quoted 6 lines
The main problem I see is that you are calling add_memory/remove_memory() on memory your device driver doesn't own. It
could reside on a DIMM if I am not mistaking (or later on paravirtualized memory devices like virtio-mem if I ever get to implement them ;) ).
This is just for baremetal/powernv so shouldn't affect virtual memory devices.
Quoted 4 lines
How is it guaranteed that the memory you are allocating does not reside
on a DIMM for example added viaadd_memory()by the ACPI driver?
Good point. We don't have ACPI on powernv but currently this would try to remove memory from any online memory node, not just the ones that are backed by RAM. oops.
Quoted 10 lines
Quoted 9 lines
Of course, other interfaces might make sense.
You can then start using these memory blocks and hinder them from getting onlined (as a safety net) via memory notifiers.
That would at least avoid you having to call add_memory/remove_memory/offline_pages/device_online/modifying memblock
states manually.
Quoted 8 lines
I see what you're saying and that definitely sounds safer.
We would still need to call
remove_memoryandadd_memoryfrom memtrace as
just offlining memory doesn't remove it from the linear page tables (if
it's still in the page tables then hardware can prefetch it and if hardware tracing is using it then the box checkstops).
That prefetching part is interesting (and nasty as well). If we could at least get rid of the manual onlining/offlining, I would be able to sleep better at night ;) One step at a time.
Quoted 36 lines
Quoted 29 lines
(binding the memory block devices to a driver would be nicer, but the infrastructure is not really there yet - we have no such drivers in place yet)
Quoted 11 lines
I don't know the mm code nor how the notifiers work very well so I can't quite see how the above would work. I'm assuming memtrace would
register a hotplug notifier and when memory is offlined from userspace,
the callback func in memtrace would be called if the priority was high
enough? But how do we know that the memory being offlined is intended
for usto touch? Is there a way to offline memory from userspace not using sysfs or have I missed something in the sysfs interface?The notifier would really only be used to hinder onlining as a safety net. User space prepares (offlines) the memory blocks and then tells the
drivers which memory blocks to use.Quoted 5 lines
On a second read, perhaps you are assuming that memtrace is used after
adding new memory at runtime? If so, that is not the case. If not, then
would you be able to clarify what I'm not seeing?Quoted 6 lines
The main problem I see is that you are calling add_memory/remove_memory() on memory your device driver doesn't own. It
could reside on a DIMM if I am not mistaking (or later on paravirtualized memory devices like virtio-mem if I ever get to implement them ;) ).
Quoted 2 lines
This is just for baremetal/powernv so shouldn't affect virtual memory devices.
Good to now.
Quoted 9 lines
Quoted 5 lines
How is it guaranteed that the memory you are allocating does not reside
on a DIMM for example added viaadd_memory()by the ACPI driver?Good point. We don't have ACPI on powernv but currently this would try to remove memory from any online memory node, not just the ones that are backed by RAM. oops.
Okay, so essentially no memory hotplug/unplug along with memtrace. (can we document that somewhere?). I think add_memory()/try_remove_memory() could be tolerable in these environments (as it's only boot memory).
Signature · 3 lines
Thanks, David / dhildenb
Quoted 20 lines · David Hildenbrand
Quoted 12 lines
Quoted 9 lines
Of course, other interfaces might make sense.
You can then start using these memory blocks and hinder them from getting onlined (as a safety net) via memory notifiers.
That would at least avoid you having to call add_memory/remove_memory/offline_pages/device_online/modifying memblock
states manually.I see what you're saying and that definitely sounds safer.
Quoted 7 lines
We would still need to call
remove_memoryandadd_memoryfrom memtrace
as
just offlining memory doesn't remove it from the linear page tables (if
it's still in the page tables then hardware can prefetch it and if hardware tracing is using it then the box checkstops).
Quoted 6 lines
That prefetching part is interesting (and nasty as well). If we could at
least get rid of the manual onlining/offlining, I would be able to sleep
better at night ;) One step at a time.
Ok, I'll get to that soon :)
Quoted 60 lines
Quoted 44 lines
Quoted 36 lines
(binding the memory block devices to a driver would be nicer, but the
infrastructure is not really there yet - we have no such drivers in
place yet)Quoted 6 lines
I don't know the mm code nor how the notifiers work very well so I
can't quite see how the above would work. I'm assuming memtrace would
register a hotplug notifier and when memory is offlined from userspace,Quoted 8 lines
the callback func in memtrace would be called if the priority was
high
enough? But how do we know that the memory being offlined is intended
for usto touch? Is there a way to offline memory from userspace not
using sysfs or have I missed something in the sysfs interface?The notifier would really only be used to hinder onlining as a safety
net. User space prepares (offlines) the memory blocks and then tells
the
drivers which memory blocks to use.Quoted 7 lines
On a second read, perhaps you are assuming that memtrace is used
after
adding new memory at runtime? If so, that is not the case. If not,
then
would you be able to clarify what I'm not seeing?Quoted 7 lines
The main problem I see is that you are calling add_memory/remove_memory() on memory your device driver doesn't own.
It
could reside on a DIMM if I am not mistaking (or later on paravirtualized memory devices like virtio-mem if I ever get to implement them ;) ).Quoted 3 lines
This is just for baremetal/powernv so shouldn't affect virtual memory
devices.Good to now.
Quoted 9 lines
Quoted 3 lines
How is it guaranteed that the memory you are allocating does not reside
on a DIMM for example added viaadd_memory()by the ACPI driver?Good point. We don't have ACPI on powernv but currently this would try
to remove memory from any online memory node, not just the ones that
are backed by RAM. oops.
Quoted 6 lines
Okay, so essentially no memory hotplug/unplug along with memtrace. (can
we document that somewhere?). I think add_memory()/try_remove_memory()
could be tolerable in these environments (as it's only boot memory).
Sure thing.
Quoted 20 lines · David Hildenbrand
Quoted 12 lines
Quoted 9 lines
Of course, other interfaces might make sense.
You can then start using these memory blocks and hinder them from getting onlined (as a safety net) via memory notifiers.
That would at least avoid you having to call add_memory/remove_memory/offline_pages/device_online/modifying memblock
states manually.I see what you're saying and that definitely sounds safer.
Quoted 7 lines
We would still need to call
remove_memoryandadd_memoryfrom memtrace
as
just offlining memory doesn't remove it from the linear page tables (if
it's still in the page tables then hardware can prefetch it and if hardware tracing is using it then the box checkstops).
Quoted 6 lines
That prefetching part is interesting (and nasty as well). If we could at
least get rid of the manual onlining/offlining, I would be able to sleep
better at night ;) One step at a time.
What are your thoughts on adding remove to state_store in drivers/base/memory.c? And an accompanying add? So then userspace could do "echo remove > memory34/state"?
Then most of the memtrace code could be moved to a userspace tool. The only bit that we would need to keep in the kernel is setting up debugfs files in memtrace_init_debugfs.
Quoted 28 lines · Rashmica Gupta
Quoted 20 lines · David Hildenbrand
Quoted 12 lines
Quoted 9 lines
Of course, other interfaces might make sense.
You can then start using these memory blocks and hinder them from getting onlined (as a safety net) via memory notifiers.
That would at least avoid you having to call add_memory/remove_memory/offline_pages/device_online/modifying memblock
states manually.I see what you're saying and that definitely sounds safer.
Quoted 7 lines
We would still need to call
remove_memoryandadd_memoryfrom memtrace
as
just offlining memory doesn't remove it from the linear page tables (if
it's still in the page tables then hardware can prefetch it and if hardware tracing is using it then the box checkstops).Quoted 6 lines
That prefetching part is interesting (and nasty as well). If we could at
least get rid of the manual onlining/offlining, I would be able to sleep
better at night ;) One step at a time.
Quoted 3 lines
What are your thoughts on adding remove to
state_storeindrivers/base/memory.c? And an accompanying add? So then userspace could do "echo remove > memory34/state"?
I consider such an interface dangerous (removing random memory you don't own, especially in the context of Oscars work some blocks would suddenly not be removable again) and only of limited used. The requirement of memtrace is really special, and it only works somewhat reliably with boot memory.
FWIW, we do have a "probe" interface on some architectures but decided that a "remove" interface belongs into a debug/test kernel module. The memory block device API is already messed up enough (e.g., "removable" property which doesn't indicate at all if memory can be removed, only if it could be offlined) - we decided to keep changes at a minimum for now
- rather clean up than add new stuff.
Quoted 3 lines
Then most of the memtrace code could be moved to a userspace tool. The only bit that we would need to keep in the kernel is setting up debugfs files in
memtrace_init_debugfs.
The nice thing is, with remove_memory() you will now get an error in case all memory blocks are not offline yet. So it only boils down to calling add_memory()/remove_memory() without even checking the state of the blocks. (only nids have to be handled manually correctly)
Signature · 3 lines
Thanks, David / dhildenb