mmc: Select SPL_HS200_SUPPORT if SPL_HS400_SUPPORT is selected
PATCH 1/1 mmc: Select SPL_HS200_SUPPORT if SPL_HS400_SUPPORT is selected
Select SPL_HS200_SUPPORT if SPL_HS400_SUPPORT is selected as is being done for the U-boot case.
--- drivers/mmc/Kconfig | 1 + 1 file changed, 1 insertion(+)
drivers/mmc/Kconfig +1 -0
@@ -156,6 +156,7 @@ config MMC_HS400_SUPPORT config SPL_MMC_HS400_SUPPORT bool "enable HS400 support in SPL" + select SPL_MMC_HS200_SUPPORT help The HS400 mode is support by some eMMC. The bus frequency is up to 200MHz. This mode requires tuning the IO.
Signature · 1 line
2.19.2
PATCH 1/1 mmc: Select SPL_HS200_SUPPORT if SPL_HS400_SUPPORT is selected
Quoted 22 lines
Subject: [PATCH] mmc: Select
SPL_HS200_SUPPORTifSPL_HS400_SUPPORTis selectedSelect
SPL_HS200_SUPPORTifSPL_HS400_SUPPORTis selected as is being done for the U-boot case.Signed-off-by Faiz Abbas <[email protected]>--- drivers/mmc/Kconfig | 1 + 1 file changed, 1 insertion(+)drivers/mmc/Kconfig index renamed from drivers/mmc/Kconfig +0
-0
4cdae41b59..66097ce0e7100644drivers/mmc/Kconfig +1
-0@@ -156,6 +156,7 @@ config MMC_HS400_SUPPORT config SPL_MMC_HS400_SUPPORT bool "enable HS400 support in SPL" + select SPL_MMC_HS200_SUPPORT help The HS400 mode is support by some eMMC. The bus frequency is up
Quoted 2 lines
to
200MHz. This mode requires tuning the IO.
Quoted 2 lines
--
2.19.2
Peng Fan
AppliedPATCH 1/1 mmc: Select SPL_HS200_SUPPORT if SPL_HS400_SUPPORT is selected
In reply to Faiz AbbasQuoted 22 lines
Subject: [PATCH] mmc: Select
SPL_HS200_SUPPORTifSPL_HS400_SUPPORTis selectedSelect
SPL_HS200_SUPPORTifSPL_HS400_SUPPORTis selected as is being done for the U-boot case.Signed-off-by Faiz Abbas <[email protected]>--- drivers/mmc/Kconfig | 1 + 1 file changed, 1 insertion(+)drivers/mmc/Kconfig index renamed from drivers/mmc/Kconfig +0
-0
4cdae41b59..66097ce0e7100644drivers/mmc/Kconfig +1
-0@@ -156,6 +156,7 @@ config MMC_HS400_SUPPORT config SPL_MMC_HS400_SUPPORT bool "enable HS400 support in SPL" + select SPL_MMC_HS200_SUPPORT help The HS400 mode is support by some eMMC. The bus frequency is up
Quoted 2 lines
to
200MHz. This mode requires tuning the IO.
Applied to mmc/master.
Thanks,
Peng.
Quoted 2 lines
--
2.19.2