board/friendlyarm: Add support for friendlyarm nanopi neo4 board
PATCH 1/3 board/friendlyarm: Add support for friendlyarm nanopi neo4 board
This initial support includes:
Linux v5.2-rc1
Custom U-Boot
Arm Trusted Firmware v2.0
Buildroot default packages
--- .gitlab-ci.yml | 1 + DEVELOPERS | 2 ++ board/friendlyarm/nanopi-neo4/extlinux.conf | 4 +++ board/friendlyarm/nanopi-neo4/genimage.cfg | 22 ++++++++++++ board/friendlyarm/nanopi-neo4/post-build.sh | 9 +++++ board/friendlyarm/nanopi-neo4/readme.txt | 53 +++++++++++++++++++++++++++ configs/nanopi_neo4_defconfig | 55 +++++++++++++++++++++++++++++ 7 files changed, 146 insertions(+) create mode 100644 board/friendlyarm/nanopi-neo4/extlinux.conf create mode 100644 board/friendlyarm/nanopi-neo4/genimage.cfg create mode 100755 board/friendlyarm/nanopi-neo4/post-build.sh create mode 100644 board/friendlyarm/nanopi-neo4/readme.txt create mode 100644 configs/nanopi_neo4_defconfig
.gitlab-ci.yml +1 -0
@@ -181,6 +181,7 @@ nanopi_m1_defconfig: { extends: .defconfig } nanopi_m1_plus_defconfig: { extends: .defconfig } nanopi_m4_defconfig: { extends: .defconfig } nanopi_neo_defconfig: { extends: .defconfig } +nanopi_neo4_defconfig: { extends: .defconfig } nexbox_a95x_defconfig: { extends: .defconfig } nitrogen6sx_defconfig: { extends: .defconfig } nitrogen6x_defconfig: { extends: .defconfig }
DEVELOPERS +2 -0
@@ -2044,10 +2044,12 @@ F: package/wolfssl/ N: Shyam Saini <[email protected]> F: board/friendlyarm/nanopc-t4/ F: board/friendlyarm/nanopi-m4/ +F: board/friendlyarm/nanopi-neo4/ F: board/olimex/a33_olinuxino/ F: board/orangepi/orangepi-rk3399/ F: configs/nanopc_t4_defconfig F: configs/nanopi_m4_defconfig +F: configs/nanopi_neo4_defconfig F: configs/olimex_a33_olinuxino_defconfig F: configs/orangepi_rk3399_defconfig
board/friendlyarm/nanopi-neo4/extlinux.conf new file +4 -0
@@ -0,0 +1,4 @@ +label NanoPi Neo4 linux + kernel /boot/Image + devicetree /boot/rk3399-nanopi-neo4.dtb + append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p1 rootwait
board/friendlyarm/nanopi-neo4/genimage.cfg new file +22 -0
@@ -0,0 +1,22 @@ +image sdcard.img { + hdimage { + } + + partition u-boot-tpl-spl-dtb { + in-partition-table = "no" + image = "u-boot-tpl-spl-dtb.img" + offset = 32K + } + + partition u-boot-dtb { + in-partition-table = "no" + image = "u-boot.itb" + offset = 8M + size = 30M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +}
board/friendlyarm/nanopi-neo4/post-build.sh new file +9 -0
@@ -0,0 +1,9 @@ +#!/bin/sh + +MKIMAGE=$HOST_DIR/bin/mkimage +BOARD_DIR="$(dirname $0)" + +$MKIMAGE -n rk3399 -T rksd -d $BINARIES_DIR/u-boot-tpl-dtb.bin $BINARIES_DIR/u-boot-tpl-dtb.img +cat $BINARIES_DIR/u-boot-tpl-dtb.img $BINARIES_DIR/u-boot-spl-dtb.bin > $BINARIES_DIR/u-boot-tpl-spl-dtb.img + +install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
board/friendlyarm/nanopi-neo4/readme.txt new file +53 -0
53 lines not on this page · raw message
configs/nanopi_neo4_defconfig new file +55 -0
55 lines not on this page · raw message
Signature · 1 line
2.11.0
PATCH 2/3 board/radxa: Add support for Radxa Rock Pi4 board
This initial support includes:
Linux 5.1
Custom U-Boot
Arm Trusted Firmware v2.0
Buildroot default packages
--- .gitlab-ci.yml | 1 + DEVELOPERS | 2 ++ board/radxa/rock-pi4/extlinux.conf | 4 +++ board/radxa/rock-pi4/genimage.cfg | 22 +++++++++++++++ board/radxa/rock-pi4/post-build.sh | 9 +++++++ board/radxa/rock-pi4/readme.txt | 51 +++++++++++++++++++++++++++++++++++ configs/radxa_rock_pi4_defconfig | 55 ++++++++++++++++++++++++++++++++++++++ 7 files changed, 144 insertions(+) create mode 100644 board/radxa/rock-pi4/extlinux.conf create mode 100644 board/radxa/rock-pi4/genimage.cfg create mode 100755 board/radxa/rock-pi4/post-build.sh create mode 100644 board/radxa/rock-pi4/readme.txt create mode 100644 configs/radxa_rock_pi4_defconfig
.gitlab-ci.yml +1 -0
@@ -250,6 +250,7 @@ qemu_x86_64_defconfig: { extends: .defconfig } qemu_x86_defconfig: { extends: .defconfig } qemu_xtensa_lx60_defconfig: { extends: .defconfig } qemu_xtensa_lx60_nommu_defconfig: { extends: .defconfig } +radxa_rock_pi4_defconfig: { extends: .defconfig } raspberrypi0_defconfig: { extends: .defconfig } raspberrypi0w_defconfig: { extends: .defconfig } raspberrypi2_defconfig: { extends: .defconfig }
DEVELOPERS +2 -0
@@ -2047,11 +2047,13 @@ F: board/friendlyarm/nanopi-m4/ F: board/friendlyarm/nanopi-neo4/ F: board/olimex/a33_olinuxino/ F: board/orangepi/orangepi-rk3399/ +F: board/radxa/ F: configs/nanopc_t4_defconfig F: configs/nanopi_m4_defconfig F: configs/nanopi_neo4_defconfig F: configs/olimex_a33_olinuxino_defconfig F: configs/orangepi_rk3399_defconfig +F: configs/radxa_rock_pi4_defconfig N: Simon Dawson <[email protected]> F: boot/at91bootstrap3/
board/radxa/rock-pi4/extlinux.conf new file +4 -0
@@ -0,0 +1,4 @@ +label Radxa Rock pi4 linux + kernel /boot/Image + devicetree /boot/rk3399-rock-pi-4.dtb + append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk0p1 rootwait
board/radxa/rock-pi4/genimage.cfg new file +22 -0
@@ -0,0 +1,22 @@ +image sdcard.img { + hdimage { + } + + partition u-boot-tpl-spl-dtb { + in-partition-table = "no" + image = "u-boot-tpl-spl-dtb.img" + offset = 32K + } + + partition u-boot-dtb { + in-partition-table = "no" + image = "u-boot.itb" + offset = 8M + size = 30M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +}
board/radxa/rock-pi4/post-build.sh new file +9 -0
@@ -0,0 +1,9 @@ +#!/bin/sh + +MKIMAGE=$HOST_DIR/bin/mkimage +BOARD_DIR="$(dirname $0)" + +$MKIMAGE -n rk3399 -T rksd -d $BINARIES_DIR/u-boot-tpl-dtb.bin $BINARIES_DIR/u-boot-tpl-dtb.img +cat $BINARIES_DIR/u-boot-tpl-dtb.img $BINARIES_DIR/u-boot-spl-dtb.bin > $BINARIES_DIR/u-boot-tpl-spl-dtb.img + +install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
board/radxa/rock-pi4/readme.txt new file +51 -0
51 lines not on this page · raw message
configs/radxa_rock_pi4_defconfig new file +55 -0
55 lines not on this page · raw message
Signature · 1 line
2.11.0
PATCH 3/3 board/pine64: Add support for Pine64 RockPro64 board
In reply to Shyam SainiThis initial support includes:
Linux 5.1
Custom U-Boot
Arm Trusted Firmware v2.0
Buildroot default packages
--- .gitlab-ci.yml | 1 + DEVELOPERS | 2 ++ board/pine64/rockpro64/extlinux.conf | 4 +++ board/pine64/rockpro64/genimage.cfg | 22 +++++++++++++++ board/pine64/rockpro64/post-build.sh | 9 ++++++ board/pine64/rockpro64/readme.txt | 51 +++++++++++++++++++++++++++++++++ configs/pine64_rockpro64_defconfig | 55 ++++++++++++++++++++++++++++++++++++ 7 files changed, 144 insertions(+) create mode 100644 board/pine64/rockpro64/extlinux.conf create mode 100644 board/pine64/rockpro64/genimage.cfg create mode 100755 board/pine64/rockpro64/post-build.sh create mode 100644 board/pine64/rockpro64/readme.txt create mode 100644 configs/pine64_rockpro64_defconfig
.gitlab-ci.yml +1 -0
@@ -215,6 +215,7 @@ pandaboard_defconfig: { extends: .defconfig } pc_x86_64_bios_defconfig: { extends: .defconfig } pc_x86_64_efi_defconfig: { extends: .defconfig } pine64_defconfig: { extends: .defconfig } +pine64_rockpro64_defconfig: { extends: .defconfig } pine64_sopine_defconfig: { extends: .defconfig } qemu_aarch64_virt_defconfig: { extends: .defconfig } qemu_arm_versatile_defconfig: { extends: .defconfig }
DEVELOPERS +2 -0
@@ -2047,12 +2047,14 @@ F: board/friendlyarm/nanopi-m4/ F: board/friendlyarm/nanopi-neo4/ F: board/olimex/a33_olinuxino/ F: board/orangepi/orangepi-rk3399/ +F: board/pine64/rockpro64 F: board/radxa/ F: configs/nanopc_t4_defconfig F: configs/nanopi_m4_defconfig F: configs/nanopi_neo4_defconfig F: configs/olimex_a33_olinuxino_defconfig F: configs/orangepi_rk3399_defconfig +F: configs/pine64_rockpro64_defconfig F: configs/radxa_rock_pi4_defconfig N: Simon Dawson <[email protected]>
board/pine64/rockpro64/extlinux.conf new file +4 -0
@@ -0,0 +1,4 @@ +label RockPro64 linux + kernel /boot/Image + devicetree /boot/rk3399-rockpro64.dtb + append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk0p1 rootwait
board/pine64/rockpro64/genimage.cfg new file +22 -0
@@ -0,0 +1,22 @@ +image sdcard.img { + hdimage { + } + + partition u-boot-tpl-spl-dtb { + in-partition-table = "no" + image = "u-boot-tpl-spl-dtb.img" + offset = 32K + } + + partition u-boot-dtb { + in-partition-table = "no" + image = "u-boot.itb" + offset = 8M + size = 30M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +}
board/pine64/rockpro64/post-build.sh new file +9 -0
@@ -0,0 +1,9 @@ +#!/bin/sh + +MKIMAGE=$HOST_DIR/bin/mkimage +BOARD_DIR="$(dirname $0)" + +$MKIMAGE -n rk3399 -T rksd -d $BINARIES_DIR/u-boot-tpl-dtb.bin $BINARIES_DIR/u-boot-tpl-dtb.img +cat $BINARIES_DIR/u-boot-tpl-dtb.img $BINARIES_DIR/u-boot-spl-dtb.bin > $BINARIES_DIR/u-boot-tpl-spl-dtb.img + +install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
board/pine64/rockpro64/readme.txt new file +51 -0
51 lines not on this page · raw message
configs/pine64_rockpro64_defconfig new file +55 -0
55 lines not on this page · raw message
Signature · 1 line
2.11.0
PATCH 1/3 board/friendlyarm: Add support for friendlyarm nanopi neo4 board
In reply to Shyam SainiHello Shyam,
Quoted 7 lines · On Tue, 4 Jun 2019 14:23:05 +0530 Shyam Saini…
This initial support includes:
Linux v5.2-rc1
Custom U-Boot
Arm Trusted Firmware v2.0
Buildroot default packagesSigned-off-by Shyam Saini <[email protected]>
I have finally applied this series. There were a few things to adjust though, which were identical in all three patches, so I'll only comment on this one, but it also applied to the 2 other patches in this series.
First, the commit title should be:
configs/nanopi_neo4: new defconfig
configs/nanopi_neo4_defconfig line 6
Quoted 12 lines
configs/nanopi_neo4_defconfig new file +6
-0@@ -0,0 +1,55 @@ +# Architecture +BR2_aarch64=y +BR2_cortex_a72_a53=y + +# Linux headers 5.1 series +BR2_KERNEL_HEADERS_5_1=y
All defconfigs that build their own kernel should use the "Same as kernel" mechanism for kernel headers. So this should have been:
# Linux headers same as kernel, a 5.2 series
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_2=y
configs/nanopi_neo4_defconfig line 36
Quoted 4 lines
configs/nanopi_neo4_defconfig new file +4
-0+# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="v5.2-rc1"
I switched to using the final 5.2 kernel.
configs/nanopi_neo4_defconfig line 48
Quoted 1 line
configs/nanopi_neo4_defconfig new file +1
-0+BR2_TARGET_ROOTFS_EXT2_SIZE="512M"
And dropped this one, to simply use the default ext4 filesystem size.
As I said, I fixed those details on all three defconfigs, and applied all of them.
Thanks!
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
PATCH 1/3 board/friendlyarm: Add support for friendlyarm nanopi neo4 board
Hi Thomas,
Sorry for the late reply.
Quoted 13 lines
Hello Shyam,
Quoted 7 lines · On Tue, 4 Jun 2019 14:23:05 +0530 Shyam Saini…
This initial support includes:
Linux v5.2-rc1
Custom U-Boot
Arm Trusted Firmware v2.0
Buildroot default packagesSigned-off-by Shyam Saini <[email protected]>
Quoted 7 lines
I have finally applied this series. There were a few things to adjust though, which were identical in all three patches, so I'll only comment on this one, but it also applied to the 2 other patches in this series.
First, the commit title should be:
configs/nanopi_neo4: new defconfig
Will take care of these things next time for sure.
Quoted 31 lines
Quoted 9 lines
configs/nanopi_neo4_defconfig new file +0
-0configs/nanopi_neo4_defconfig line 6
Quoted 6 lines
configs/nanopi_neo4_defconfig new file +6
-0@@ -0,0 +1,55 @@ +# Architecture +BR2_aarch64=y +BR2_cortex_a72_a53=y + +# Linux headers 5.1 series +BR2_KERNEL_HEADERS_5_1=yAll defconfigs that build their own kernel should use the "Same as kernel" mechanism for kernel headers. So this should have been:
# Linux headers same as kernel, a 5.2 series
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_2=yconfigs/nanopi_neo4_defconfig line 36
Quoted 4 lines
configs/nanopi_neo4_defconfig new file +4
-0+# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="v5.2-rc1"I switched to using the final 5.2 kernel.
Quoted 7 lines
configs/nanopi_neo4_defconfig line 48
Quoted 1 line
configs/nanopi_neo4_defconfig new file +1
-0+BR2_TARGET_ROOTFS_EXT2_SIZE="512M"And dropped this one, to simply use the default ext4 filesystem size.
As I said, I fixed those details on all three defconfigs, and applied all of them.
I have noted all your feedback for the future patches.
Thanks a lot for making these changes on your own and the feedback.