Skip to contentSkip to conversation

board/friendlyarm: Add initial support for NanoPc T4 board

PATCH New Shyam Saini 2 participants 2 messages Jun 4, 2019 – Aug 3, 2019

lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 board/friendlyarm: Add initial support for NanoPc T4 board

This initial support includes:
Linux 5.1
Custom U-Boot
Arm Trusted Firmware v2.0
Buildroot default packages

---
Changelogs:
V1->V2: Use linux 5.1
Add empty line after section header
Add space after # in defconfig
Fix alphabetical order in DEVELOPERS file

V2->V3: Fix alphabetical order in DEVELOPERS file

---
 .gitlab-ci.yml                            |  1 +
 DEVELOPERS                                | 10 +++---
 board/friendlyarm/nanopc-t4/extlinux.conf |  4 +++
 board/friendlyarm/nanopc-t4/genimage.cfg  | 22 +++++++++++++
 board/friendlyarm/nanopc-t4/post-build.sh |  8 +++++
 board/friendlyarm/nanopc-t4/readme.txt    | 49 +++++++++++++++++++++++++++
 configs/nanopc_t4_defconfig               | 55 +++++++++++++++++++++++++++++++
 7 files changed, 145 insertions(+), 4 deletions(-)
 create mode 100644 board/friendlyarm/nanopc-t4/extlinux.conf
 create mode 100644 board/friendlyarm/nanopc-t4/genimage.cfg
 create mode 100755 board/friendlyarm/nanopc-t4/post-build.sh
 create mode 100644 board/friendlyarm/nanopc-t4/readme.txt
 create mode 100644 configs/nanopc_t4_defconfig
.gitlab-ci.yml +1 -0
index 5b842762f1..5ed1b8f4d5 100644
@@ -176,6 +176,7 @@ mx53loco_defconfig: { extends: .defconfig }
 mx6cubox_defconfig: { extends: .defconfig }
 mx6sx_udoo_neo_defconfig: { extends: .defconfig }
 mx6udoo_defconfig: { extends: .defconfig }
+nanopc_t4_defconfig: { extends: .defconfig }
 nanopi_m1_defconfig: { extends: .defconfig }
 nanopi_m1_plus_defconfig: { extends: .defconfig }
 nanopi_m4_defconfig: { extends: .defconfig }
DEVELOPERS +6 -4
index e4a089e6f5..a4b2c3da95 100644
@@ -2042,12 +2042,14 @@ F:	package/ubus/
 F:	package/wolfssl/
 
 N:     Shyam Saini <[email protected]>
-F:     board/friendlyarm/nanopi-m4/
-F:     configs/nanopi_m4_defconfig
-F:     board/orangepi/orangepi-rk3399/
-F:     configs/orangepi_rk3399_defconfig
+F:	board/friendlyarm/nanopc-t4/
+F:	board/friendlyarm/nanopi-m4/
 F:	board/olimex/a33_olinuxino/
+F:	board/orangepi/orangepi-rk3399/
+F:	configs/nanopc_t4_defconfig
+F:	configs/nanopi_m4_defconfig
 F:	configs/olimex_a33_olinuxino_defconfig
+F:	configs/orangepi_rk3399_defconfig
 
 N:	Simon Dawson <[email protected]>
 F:	boot/at91bootstrap3/
board/friendlyarm/nanopc-t4/extlinux.conf new file +4 -0
new file mode 100644
index 0000000000..b09c20db84
@@ -0,0 +1,4 @@
+label NanoPc T4
+  kernel /boot/Image
+  devicetree /boot/rk3399-nanopc-t4.dtb
+  append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p1 rootwait
board/friendlyarm/nanopc-t4/genimage.cfg new file +22 -0
new file mode 100644
index 0000000000..6404b0ad3b
@@ -0,0 +1,22 @@
+image sdcard.img {
+	hdimage {
+	}
+
+	partition u-boot-spl-dtb {
+		in-partition-table = "no"
+		image = "u-boot-spl-dtb.img"
+		offset = 32K
+	}
+
+	partition u-boot-dtb {
+		in-partition-table = "no"
+		image = "u-boot.itb"
+		offset = 8M
+		size = 30M
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+	}
+}
board/friendlyarm/nanopc-t4/post-build.sh new file +8 -0
new file mode 100755
index 0000000000..9b0c4ecc83
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+MKIMAGE=$HOST_DIR/bin/mkimage
+BOARD_DIR="$(dirname $0)"
+
+$MKIMAGE -n rk3399 -T rksd -d $BINARIES_DIR/u-boot-spl-dtb.bin $BINARIES_DIR/u-boot-spl-dtb.img
+
+install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
board/friendlyarm/nanopc-t4/readme.txt new file +49 -0

49 lines not on this page · raw message

configs/nanopc_t4_defconfig new file +55 -0

55 lines not on this page · raw message

Signature · 1 line
2.11.0
#1 lore raw

PATCH v3 1/1 board/friendlyarm: Add initial support for NanoPc T4 board

Hello Shyam,

Quoted 6 lines · On Tue, 4 Jun 2019 13:20:37 +0530 Shyam Saini…

This initial support includes:
Linux 5.1
Custom U-Boot
Arm Trusted Firmware v2.0
Buildroot default packages

Quoted 7 lines

---
Changelogs:
V1->V2: Use linux 5.1
Add empty line after section header
Add space after # in defconfig
Fix alphabetical order in DEVELOPERS file

I've applied, after fixing the commit title, switching to BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_1=y, and using the default ext2 filesystem size.

Thanks!

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com