sgp30: New kernel module package
PATCH 1/1 sgp30: New kernel module package
Kernel module for the Sensirion sgp30 / sgpc2 chemical sensors.
--- package/Config.in | 1 + package/sgp30/Config.in | 17 +++++++++++++++++ package/sgp30/sgp30.hash | 1 + package/sgp30/sgp30.mk | 13 +++++++++++++ 4 files changed, 32 insertions(+) create mode 100644 package/sgp30/Config.in create mode 100644 package/sgp30/sgp30.hash create mode 100644 package/sgp30/sgp30.mk
package/Config.in +1 -0
@@ -507,6 +507,7 @@ endmenu source "package/sedutil/Config.in" source "package/setserial/Config.in" source "package/sg3_utils/Config.in" + source "package/sgp30/Config.in" source "package/sigrok-cli/Config.in" source "package/sispmctl/Config.in" source "package/smartmontools/Config.in"
package/sgp30/Config.in new file +17 -0
@@ -0,0 +1,17 @@ + +config BR2_PACKAGE_SGP30 + bool "sgp30/sgpc3" + depends on BR2_LINUX_KERNEL + help + I2C interface support for the following + Sensirion SGP multi-pixel gas sensors: + + * SGP30 gas sensor + * SGPC3 low power gas sensor + + This module will be called sgp30. + + Requires CONFIG_CRC8 & CONFIG_IIO + +comment "sgp30/sgpc3 needs a Linux kernel to be built" + depends on !BR2_LINUX_KERNEL
package/sgp30/sgp30.hash new file +1 -0
@@ -0,0 +1 @@ +sha256 f8d619046589eee93dbce091be5dc3059a2e37513e50b3c61eada9c3b6fc7c0f Sensirion_Gas_Sensors_SGP30_Linux_Driver.zip
package/sgp30/sgp30.mk new file +13 -0
@@ -0,0 +1,13 @@ + +SGP30_SOURCE = Sensirion_Gas_Sensors_SGP30_Linux_Driver.zip +SGP30_SITE = https://www.sensirion.com/fileadmin/user_upload/customers/sensirion/Dokumente/13_Sample_Codes_Software/Gas_Sensors +SGP30_LICENSE = GPL-2.0+ +SGP30_LICENSE_FILE = LICENSE +SGP30_MODULE_SUBDIRS = sgp30 + +define SGP30_EXTRACT_CMDS + $(UNZIP) -d $(@D) $(SGP30_DL_DIR)/$(SGP30_SOURCE) +endef + +$(eval $(kernel-module)) +$(eval $(generic-package))
Signature · 1 line
2.13.6
PATCH 1/1 sgp30: New kernel module package
David, All,
Thanks for your contribution, and sorry to come back to it so late...
On 2018-12-02 19:26 +0100, David De Grave spake thusly:
Quoted 1 line
Kernel module for the Sensirion sgp30 / sgpc2 chemical sensors.
As you may have noticed, I've respun this patch with a few changes:
https://patchwork.ozlabs.org/patch/1141451/
Regards,
Yann E. MORIN.
Quoted 80 lines
Signed-off-by David De Grave <[email protected]>--- package/Config.in | 1 + package/sgp30/Config.in | 17 +++++++++++++++++ package/sgp30/sgp30.hash | 1 + package/sgp30/sgp30.mk | 13 +++++++++++++ 4 files changed, 32 insertions(+) create mode 100644 package/sgp30/Config.in create mode 100644 package/sgp30/sgp30.hash create mode 100644 package/sgp30/sgp30.mkpackage/Config.in +1
-0@@ -507,6 +507,7 @@ endmenu source "package/sedutil/Config.in" source "package/setserial/Config.in" source "package/sg3_utils/Config.in" + source "package/sgp30/Config.in" source "package/sigrok-cli/Config.in" source "package/sispmctl/Config.in" source "package/smartmontools/Config.in"package/sgp30/Config.in new file +17
-0@@ -0,0 +1,17 @@ + +config BR2_PACKAGE_SGP30 + bool "sgp30/sgpc3" + depends on BR2_LINUX_KERNEL + help + I2C interface support for the following + Sensirion SGP multi-pixel gas sensors: + + * SGP30 gas sensor + * SGPC3 low power gas sensor + + This module will be called sgp30. + + Requires CONFIG_CRC8 & CONFIG_IIO + +comment "sgp30/sgpc3 needs a Linux kernel to be built" + depends on !BR2_LINUX_KERNELpackage/sgp30/sgp30.hash new file +1
-0@@ -0,0 +1 @@ +sha256 f8d619046589eee93dbce091be5dc3059a2e37513e50b3c61eada9c3b6fc7c0f Sensirion_Gas_Sensors_SGP30_Linux_Driver.zippackage/sgp30/sgp30.mk new file +13
-0@@ -0,0 +1,13 @@ + +SGP30_SOURCE = Sensirion_Gas_Sensors_SGP30_Linux_Driver.zip +SGP30_SITE = https://www.sensirion.com/fileadmin/user_upload/customers/sensirion/Dokumente/13_Sample_Codes_Software/Gas_Sensors +SGP30_LICENSE = GPL-2.0+ +SGP30_LICENSE_FILE = LICENSE +SGP30_MODULE_SUBDIRS = sgp30 + +define SGP30_EXTRACT_CMDS + $(UNZIP) -d $(@D) $(SGP30_DL_DIR)/$(SGP30_SOURCE) +endef + +$(eval $(kernel-module)) +$(eval $(generic-package))Signature · 7 lines
2.13.6 _______________________________________________ buildroot mailing list buildroot at busybox.net http://lists.busybox.net/mailman/listinfo/buildroot
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
PATCH 1/1 sgp30: New kernel module package
Hi Yann,
No problem :-)
Yess and thanks for your changes. However, as Peter pointed out in an other mail,
this driver was added to the mainline kernel in the meantime (since v5.1) and I didn't
noticed it as I switched on another projet in between... Otherwise I had removed the
patch a long time ago... :-/
Moreover, the driver has few annoying bugs with the 'baseline' save/restore who makes
the kernel crash and as I can see the kernel's version looks far better. I will have
to test it again when I'll have free time ...
So, just forget about this patch and let use the more recent mainline one...
Sorry for the time spent on this and thanks for all.
Regards,
David.
Quoted 95 lines · Yann E. MORIN
David, All,
Thanks for your contribution, and sorry to come back to it so late...On 2018-12-02 19:26 +0100, David De Grave spake thusly:
Quoted 1 line
Kernel module for the Sensirion sgp30 / sgpc2 chemical sensors.
As you may have noticed, I've respun this patch with a few changes:
https://patchwork.ozlabs.org/patch/1141451/Regards,
Yann E. MORIN.Quoted 83 lines
Signed-off-by David De Grave <[email protected]>--- package/Config.in | 1 + package/sgp30/Config.in | 17 +++++++++++++++++ package/sgp30/sgp30.hash | 1 + package/sgp30/sgp30.mk | 13 +++++++++++++ 4 files changed, 32 insertions(+) create mode 100644 package/sgp30/Config.in create mode 100644 package/sgp30/sgp30.hash create mode 100644 package/sgp30/sgp30.mkpackage/Config.in +1
-0@@ -507,6 +507,7 @@ endmenu source "package/sedutil/Config.in" source "package/setserial/Config.in" source "package/sg3_utils/Config.in" + source "package/sgp30/Config.in" source "package/sigrok-cli/Config.in" source "package/sispmctl/Config.in" source "package/smartmontools/Config.in"package/sgp30/Config.in new file +17
-0@@ -0,0 +1,17 @@ + +config BR2_PACKAGE_SGP30 + bool "sgp30/sgpc3" + depends on BR2_LINUX_KERNEL + help + I2C interface support for the following + Sensirion SGP multi-pixel gas sensors: + + * SGP30 gas sensor + * SGPC3 low power gas sensor + + This module will be called sgp30. + + Requires CONFIG_CRC8 & CONFIG_IIO + +comment "sgp30/sgpc3 needs a Linux kernel to be built" + depends on !BR2_LINUX_KERNELpackage/sgp30/sgp30.hash new file +1
-0@@ -0,0 +1 @@ +sha256
f8d619046589eee93dbce091be5dc3059a2e37513e50b3c61eada9c3b6fc7c0fSensirion_Gas_Sensors_SGP30_Linux_Driver.zippackage/sgp30/sgp30.mk new file +3
-0@@ -0,0 +1,13 @@ + +SGP30_SOURCE = Sensirion_Gas_Sensors_SGP30_Linux_Driver.zip +SGP30_SITE =package/sgp30/sgp30.mk new file +10
-1+SGP30_LICENSE = GPL-2.0+ +SGP30_LICENSE_FILE = LICENSE +SGP30_MODULE_SUBDIRS = sgp30 + +define SGP30_EXTRACT_CMDS + $(UNZIP) -d $(@D) $(SGP30_DL_DIR)/$(SGP30_SOURCE) +endef + +$(eval $(kernel-module)) +$(eval $(generic-package)) --2.13.6
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot