Skip to contentSkip to conversation

ARM: dts: imx53: Update LCD panel node on M53Menlo

PATCH Applied Marek Vasut 2 participants 2 messages Aug 3, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: dts: imx53: Update LCD panel node on M53Menlo

Update the panel node with latest version of the panel used on the system. Add missing pincontrol phandle to the panel node.

Cc Shawn Guo <[email protected]>
Cc Fabio Estevam <[email protected]>
Cc NXP Linux Team <[email protected]>

To: [email protected]

---
 arch/arm/boot/dts/imx53-m53menlo.dts | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
arch/arm/boot/dts/imx53-m53menlo.dts +2 -1
index 10acc5331ba6..719ed5ca454a 100644
@@ -54,7 +54,8 @@
 	};
 
 	panel {
-		compatible = "edt,etm070080dh6";
+		compatible = "edt,etm0700g0dh6";
+		pinctrl-0 = <&pinctrl_display_gpio>;
 		enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
 
 		port {
Signature · 7 lines
2.20.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Applied
#1 lore raw
Quoted 8 lines · Marek Vasut

Update the panel node with latest version of the panel used on the system. Add missing pincontrol phandle to the panel node.

Cc Shawn Guo <[email protected]>
Cc Fabio Estevam <[email protected]>
Cc NXP Linux Team <[email protected]>

To: [email protected]

Applied, thanks.

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel