ARM: dts: imx: Cleanup style around assignment operator
Subsystems (2)
PATCH 1/1 ARM: dts: imx: Cleanup style around assignment operator
Use a space before and after assignment operator to have consistent style.
Signed-off-by Krzysztof Kozlowski <[email protected]>
--- arch/arm/boot/dts/imx6sll.dtsi | 4 ++-- arch/arm/boot/dts/imx6sx.dtsi | 4 ++-- arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi | 2 +- arch/arm/boot/dts/imx6ul.dtsi | 12 ++++++------ arch/arm/boot/dts/imx7d.dtsi | 4 ++-- arch/arm/boot/dts/imx7s.dtsi | 6 +++--- arch/arm/boot/dts/imx7ulp.dtsi | 8 ++++---- 7 files changed, 20 insertions(+), 20 deletions(-)
arch/arm/boot/dts/imx6sll.dtsi +2 -2
@@ -234,7 +234,7 @@ compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02018000 0x4000>; - interrupts =<GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; dmas = <&sdma 31 4 0>, <&sdma 32 4 0>; dma-names = "rx", "tx"; clocks = <&clks IMX6SLL_CLK_UART4_IPG>,
@@ -801,7 +801,7 @@ compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021f4000 0x4000>; - interrupts =<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; dmas = <&sdma 33 4 0>, <&sdma 34 4 0>; dma-names = "rx", "tx"; clocks = <&clks IMX6SLL_CLK_UART5_IPG>,
arch/arm/boot/dts/imx6sx.dtsi +2 -2
@@ -926,8 +926,8 @@ <&clks IMX6SX_CLK_ENET_PTP>; clock-names = "ipg", "ahb", "ptp", "enet_clk_ref", "enet_out"; - fsl,num-tx-queues=<3>; - fsl,num-rx-queues=<3>; + fsl,num-tx-queues = <3>; + fsl,num-rx-queues = <3>; status = "disabled"; };
arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi +1 -1
@@ -70,7 +70,7 @@ &i2c1 { pinctrl-names = "default"; - pinctrl-0 =<&pinctrl_i2c1>; + pinctrl-0 = <&pinctrl_i2c1>; clock-frequency = <100000>; status = "okay";
arch/arm/boot/dts/imx6ul.dtsi +6 -6
@@ -510,8 +510,8 @@ <&clks IMX6UL_CLK_ENET2_REF_125M>; clock-names = "ipg", "ahb", "ptp", "enet_clk_ref", "enet_out"; - fsl,num-tx-queues=<1>; - fsl,num-rx-queues=<1>; + fsl,num-tx-queues = <1>; + fsl,num-rx-queues = <1>; status = "disabled"; };
@@ -845,8 +845,8 @@ <&clks IMX6UL_CLK_ENET_REF>; clock-names = "ipg", "ahb", "ptp", "enet_clk_ref", "enet_out"; - fsl,num-tx-queues=<1>; - fsl,num-rx-queues=<1>; + fsl,num-tx-queues = <1>; + fsl,num-rx-queues = <1>; status = "disabled"; };
@@ -858,7 +858,7 @@ <&clks IMX6UL_CLK_USDHC1>, <&clks IMX6UL_CLK_USDHC1>; clock-names = "ipg", "ahb", "per"; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; fsl,tuning-start-tap = <20>; bus-width = <4>; status = "disabled";
@@ -873,7 +873,7 @@ <&clks IMX6UL_CLK_USDHC2>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; fsl,tuning-start-tap = <20>; status = "disabled"; };
arch/arm/boot/dts/imx7d.dtsi +2 -2
@@ -147,8 +147,8 @@ <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>; clock-names = "ipg", "ahb", "ptp", "enet_clk_ref", "enet_out"; - fsl,num-tx-queues=<3>; - fsl,num-rx-queues=<3>; + fsl,num-tx-queues = <3>; + fsl,num-rx-queues = <3>; status = "disabled"; };
arch/arm/boot/dts/imx7s.dtsi +3 -3
@@ -151,7 +151,7 @@ compatible = "fsl,imx7d-tempmon"; interrupt-parent = <&gpc>; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - fsl,tempmon =<&anatop>; + fsl,tempmon = <&anatop>; nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; nvmem-cell-names = "calib", "temp_grade";
@@ -1184,8 +1184,8 @@ <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>; clock-names = "ipg", "ahb", "ptp", "enet_clk_ref", "enet_out"; - fsl,num-tx-queues=<3>; - fsl,num-rx-queues=<3>; + fsl,num-tx-queues = <3>; + fsl,num-rx-queues = <3>; status = "disabled"; }; };
arch/arm/boot/dts/imx7ulp.dtsi +4 -4
@@ -201,12 +201,12 @@ clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, <&scg1 IMX7ULP_CLK_NIC1_DIV>, <&pcc2 IMX7ULP_CLK_USDHC0>; - clock-names ="ipg", "ahb", "per"; + clock-names = "ipg", "ahb", "per"; assigned-clocks = <&pcc2 IMX7ULP_CLK_USDHC0>; assigned-clock-parents = <&scg1 IMX7ULP_CLK_NIC1_DIV>; bus-width = <4>; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; status = "disabled"; };
@@ -217,12 +217,12 @@ clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, <&scg1 IMX7ULP_CLK_NIC1_DIV>, <&pcc2 IMX7ULP_CLK_USDHC1>; - clock-names ="ipg", "ahb", "per"; + clock-names = "ipg", "ahb", "per"; assigned-clocks = <&pcc2 IMX7ULP_CLK_USDHC1>; assigned-clock-parents = <&scg1 IMX7ULP_CLK_NIC1_DIV>; bus-width = <4>; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; status = "disabled"; };
Signature · 1 line
2.17.1
Hi Krzysztof,
Quoted 5 lines · Krzysztof Kozlowski
Use a space before and after assignment operator to have consistent style.
Signed-off-by Krzysztof Kozlowski <[email protected]>
Thanks for doing this cleanup:
Reviewed-by Fabio Estevam <[email protected]>
Shawn Guo
AppliedQuoted 4 lines · Krzysztof Kozlowski
Use a space before and after assignment operator to have consistent style.
Signed-off-by Krzysztof Kozlowski <[email protected]>
Applied, thanks.