Skip to contentSkip to conversation

board: Add Oceanic 5205 5inMFD board support

PATCH New Shyam Saini 2 participants 2 messages Apr 19, 2019 – Aug 3, 2019

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 board: Add Oceanic 5205 5inMFD board support

From: Jagan Teki <[email protected]>

This board is from sunx50i A64 SOC family.
This initial support has following features:
- Mainline U-Boot
- Linux 5.0
- Default packages from buildroot

---
Changelog:
V1->V2:
Fix readme.txt content
Fix commit head

---
 .gitlab-ci.yml                         |  1 +
 DEVELOPERS                             |  2 ++
 board/oceanic/5205-5inmfd/boot.cmd     |  6 ++++
 board/oceanic/5205-5inmfd/genimage.cfg | 39 ++++++++++++++++++++++++++
 board/oceanic/5205-5inmfd/readme.txt   | 33 ++++++++++++++++++++++
 configs/oceanic_5205_5inmfd_defconfig  | 50 ++++++++++++++++++++++++++++++++++
 6 files changed, 131 insertions(+)
 create mode 100644 board/oceanic/5205-5inmfd/boot.cmd
 create mode 100644 board/oceanic/5205-5inmfd/genimage.cfg
 create mode 100644 board/oceanic/5205-5inmfd/readme.txt
 create mode 100644 configs/oceanic_5205_5inmfd_defconfig
.gitlab-ci.yml +1 -0
index ef16b73bfb..02d6f6c0cc 100644
@@ -181,6 +181,7 @@ nitrogen6sx_defconfig: { extends: .defconfig }
 nitrogen6x_defconfig: { extends: .defconfig }
 nitrogen7_defconfig: { extends: .defconfig }
 nitrogen8m_defconfig: { extends: .defconfig }
+oceanic_5205_5inmfd_defconfig: { extends: .defconfig }
 odroidc2_defconfig: { extends: .defconfig }
 odroidxu4_defconfig: { extends: .defconfig }
 olimex_a10_olinuxino_lime_defconfig: { extends: .defconfig }
DEVELOPERS +2 -0
index 3e0ac08e11..f23479703b 100644
@@ -1000,6 +1000,7 @@ F:	board/bananapi/
 F:	board/engicam/
 F:	board/friendlyarm/nanopi-a64/
 F:	board/friendlyarm/nanopi-neo2/
+F:	board/oceanic/
 F:	board/olimex/a64-olinuxino/
 F:	board/orangepi/orangepi-lite2/
 F:	board/orangepi/orangepi-one-plus
@@ -1020,6 +1021,7 @@ F:	configs/engicam_imx6ul_geam_defconfig
 F:	configs/engicam_imx6ul_isiot_defconfig
 F:	configs/friendlyarm_nanopi_a64_defconfig
 F:	configs/friendlyarm_nanopi_neo2_defconfig
+F:	configs/oceanic_5205_5inmfd_defconfig
 F:	configs/olimex_a64_olinuxino_defconfig
 F:	configs/orangepi_lite2_defconfig
 F:	configs/orangepi_one_plus_defconfig
board/oceanic/5205-5inmfd/boot.cmd new file +6 -0
new file mode 100644
index 0000000000..b9c5f0e829
@@ -0,0 +1,6 @@
+setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
+
+fatload mmc 0 $kernel_addr_r Image
+fatload mmc 0 $fdt_addr_r sun50i-a64-oceanic-5205-5inmfd.dtb
+
+booti $kernel_addr_r - $fdt_addr_r
board/oceanic/5205-5inmfd/genimage.cfg new file +39 -0
new file mode 100644
index 0000000000..047fa488a3
@@ -0,0 +1,39 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"Image",
+			"sun50i-a64-oceanic-5205-5inmfd.dtb",
+			"boot.scr"
+		}
+	}
+	size = 64M
+}
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition spl {
+		in-partition-table = "no"
+		image = "sunxi-spl.bin"
+		offset = 8192
+	}
+
+	partition u-boot {
+		in-partition-table = "no"
+		image = "u-boot.itb"
+		offset = 40K
+		size = 1M # 1MB - 40K
+	}
+
+	partition boot {
+		partition-type = 0xC
+		bootable = "true"
+		image = "boot.vfat"
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+	}
+}
board/oceanic/5205-5inmfd/readme.txt new file +33 -0
new file mode 100644
index 0000000000..2f9e50f22a
@@ -0,0 +1,33 @@
+Intro
+=====
+
+This default configuration will allow you to start experimenting with the
+buildroot environment for the Oceanic 5205 5inmfd board. With the current
+configuration it will bring-up the board, and allow access through the serial
+console.
+
+This configuration uses U-Boot mainline and kernel mainline.
+
+How to build
+============
+
+    $ make oceanic_5205_5inmfd_defconfig
+
+    $ make
+
+Note: you will need access to the internet to download the required
+sources.
+
+How to write the SD card
+========================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card with "dd":
+
+  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+  $ sudo sync
+
+Insert the micro SDcard in your Oceanic board and power it up. The console
+is on the serial line, 115200 8N1.
configs/oceanic_5205_5inmfd_defconfig new file +50 -0

50 lines not on this page · raw message

Signature · 1 line
2.11.0
#1 lore raw

PATCH v2 1/1 board: Add Oceanic 5205 5inMFD board support

Hello,

Sorry for the very long delay in reviewing this patch.

First, the commit title should be:

configs/oceanic_5205_5inmfd: new defconfig

Quoted 10 lines · On Fri, 19 Apr 2019 15:04:48 +0530 Shyam Saini…
configs/oceanic_5205_5inmfd_defconfig new file +4 -0
new file mode 100644
index 0000000000..cd43677862
@@ -0,0 +1,50 @@
+BR2_aarch64=y
+BR2_cortex_a53=y
+BR2_ARM_FPU_VFPV4=y
+

configs/oceanic_5205_5inmfd_defconfig line 14

Quoted 10 lines
configs/oceanic_5205_5inmfd_defconfig new file +10 -0
+# Linux headers same as kernel, a 5.0 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_0=y
+
+# Firmware
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/apritzel/arm-trusted-firmware.git"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50iw1p1"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="aa75c8da415158a94b82a430b2b40000778e851f"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y

This ATF repo is marked as obsolete, and Andre recommends using mainline ATF. Could you use that instead ?

configs/oceanic_5205_5inmfd_defconfig line 21

Quoted 6 lines
configs/oceanic_5205_5inmfd_defconfig new file +6 -0
+# Bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://git.denx.de/u-boot.git"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="1692c73ccb39fb790d7ba1a43ca2f14a0f9f1f32"

I'm sure it's now in a U-Boot release. Could you use it ?

configs/oceanic_5205_5inmfd_defconfig line 40

Quoted 9 lines
configs/oceanic_5205_5inmfd_defconfig new file +9 -0
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/amarula/linux-amarula"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="504a49ae70efd2ef936f6850dcdd71a250c4cb54"
+BR2_LINUX_KERNEL_VERSION="504a49ae70efd2ef936f6850dcdd71a250c4cb54"
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-a64-oceanic-5205-5inmfd"

The support for this board is now in upstream Linux, could you use the upstream Linux kernel instead ?

Could you repost after adjusting those various aspects ?

Thanks a lot!

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com