Skip to contentSkip to conversation

powerpc: implement machine check safe memcpy

PATCH Superseded Santosh Sivaraj 1 participant 8 messages Aug 5, 2019 PowerPC

v7 of 11 Superseded Latest is v11 →

lore
Share & tools
lore
#0 lore raw

v7 cover powerpc: implement machine check safe memcpy

During a memcpy from a pmem device, if a machine check exception is generated we end up in a panic. In case of fsdax read, this should only result in a -EIO. Avoid MCE by implementing memcpy_mcsafe.

Before this patch series:

```
bash-4.4# mount -o dax /dev/pmem0 /mnt/pmem/
[ 7621.714094] Disabling lock debugging due to kernel taint
[ 7621.714099] MCE: CPU0: machine check (Severe) Host UE Load/Store [Not recovered]
[ 7621.714104] MCE: CPU0: NIP: [c000000000088978] memcpy_power7+0x418/0x7e0
[ 7621.714107] MCE: CPU0: Hardware error
[ 7621.714112] opal: Hardware platform error: Unrecoverable Machine Check exception
[ 7621.714118] CPU: 0 PID: 1368 Comm: mount Tainted: G   M              5.2.0-rc5-00239-g241e39004581
#50
[ 7621.714123] NIP:  c000000000088978 LR: c0000000008e16f8 CTR: 00000000000001de
[ 7621.714129] REGS: c0000000fffbfd70 TRAP: 0200   Tainted: G   M              
(5.2.0-rc5-00239-g241e39004581)
[ 7621.714131] MSR:  9000000002209033 <SF,HV,VEC,EE,ME,IR,DR,RI,LE>  CR: 24428840  XER: 00040000
[ 7621.714160] CFAR: c0000000000889a8 DAR: deadbeefdeadbeef DSISR: 00008000 IRQMASK: 0
[ 7621.714171] GPR00: 000000000e000000 c0000000f0b8b1e0 c0000000012cf100 c0000000ed8e1100 
[ 7621.714186] GPR04: c000020000001100 0000000000010000 0000000000000200 03fffffff1272000 
[ 7621.714201] GPR08: 0000000080000000 0000000000000010 0000000000000020 0000000000000030 
[ 7621.714216] GPR12: 0000000000000040 00007fffb8c6d390 0000000000000050 0000000000000060 
[ 7621.714232] GPR16: 0000000000000070 0000000000000000 0000000000000001 c0000000f0b8b960 
[ 7621.714247] GPR20: 0000000000000001 c0000000f0b8b940 0000000000000001 0000000000010000 
[ 7621.714262] GPR24: c000000001382560 c00c0000003b6380 c00c0000003b6380 0000000000010000 
[ 7621.714277] GPR28: 0000000000000000 0000000000010000 c000020000000000 0000000000010000 
[ 7621.714294] NIP [c000000000088978] memcpy_power7+0x418/0x7e0
[ 7621.714298] LR [c0000000008e16f8] pmem_do_bvec+0xf8/0x430
... <snip> ...
```

After this patch series:

```
bash-4.4# mount -o dax /dev/pmem0 /mnt/pmem/
[25302.883978] Buffer I/O error on dev pmem0, logical block 0, async page read
[25303.020816] EXT4-fs (pmem0): DAX enabled. Warning: EXPERIMENTAL, use at your own risk
[25303.021236] EXT4-fs (pmem0): Can't read superblock on 2nd try
[25303.152515] EXT4-fs (pmem0): DAX enabled. Warning: EXPERIMENTAL, use at your own risk
[25303.284031] EXT4-fs (pmem0): DAX enabled. Warning: EXPERIMENTAL, use at your own risk
[25304.084100] UDF-fs: bad mount option "dax" or missing value
mount: /mnt/pmem: wrong fs type, bad option, bad superblock on /dev/pmem0, missing codepage or helper
program, or other error.
```

MCE is injected on a pmem address using mambo. The last patch which adds a nop is only for testing on mambo, where r13 is not restored upon hitting vector 200.

The memcpy code can be optimised by adding VMX optimizations and GAS macros can be used to enable code reusablity, which I will send as another series.

---
Change-log:
v7:
* Move schedule_work to be called from irq_work.

v6:
* Don't return pfn, all callees are expecting physical address anyway [nick]
* Patch re-ordering: move exception table patch before memcpy_mcsafe patch [nick]
* Reword commit log for search_exception_tables patch [nick]

v5:
* Don't use search_exception_tables since it searches for module exception tables also [Nicholas]
* Fix commit message for patch 2 [Nicholas]

v4:
* Squash return remaining bytes patch to memcpy_mcsafe implemtation patch [christophe]
* Access ok should be checked for copy_to_user_mcsafe() [christophe]

v3:
* Drop patch which enables DR/IR for external modules
* Drop notifier call chain, we don't want to do that in real mode
* Return remaining bytes from memcpy_mcsafe correctly
* We no longer restore r13 for simulator tests, rather use a nop at vector 0x200 [workaround for simulator; not to be merged]

v2:
* Don't set RI bit explicitly [mahesh]
* Re-ordered series to get r13 workaround as the last patch --
Balbir Singh (2):
powerpc/mce: Fix MCE handling for huge pages powerpc/memcpy: Add memcpy_mcsafe for pmem

Reza Arbab (1):
powerpc/mce: Make machine_check_ue_event() static

Santosh Sivaraj (4):
powerpc/mce: Schedule work from irq_work
extable: Add function to search only kernel exception table powerpc/mce: Handle UE event for memcpy_mcsafe
powerpc: add machine check safe copy_to_user

 arch/powerpc/Kconfig                 |   1 +
 arch/powerpc/include/asm/mce.h       |   6 +-
 arch/powerpc/include/asm/string.h    |   2 +
 arch/powerpc/include/asm/uaccess.h   |  14 ++
 arch/powerpc/kernel/mce.c            |  23 ++-
 arch/powerpc/kernel/mce_power.c      |  65 +++++---
 arch/powerpc/lib/Makefile            |   2 +-
 arch/powerpc/lib/memcpy_mcsafe_64.S  | 239 +++++++++++++++++++++++++++
 arch/powerpc/platforms/pseries/ras.c |   9 +-
 include/linux/extable.h              |   2 +
 kernel/extable.c                     |  11 +-
 11 files changed, 330 insertions(+), 44 deletions(-)
 create mode 100644 arch/powerpc/lib/memcpy_mcsafe_64.S
Signature · 1 line
2.20.1
#1 lore raw

PATCH v7 1/7 powerpc/mce: Schedule work from irq_work

schedule_work() cannot be called from MCE exception context as MCE can interrupt even in interrupt disabled context.

Fixes 733e4a4c ("powerpc/mce: hookup memory_failure for UE errors")
---
 arch/powerpc/kernel/mce.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
arch/powerpc/kernel/mce.c +5 -3
index b18df633eae9..0ab6fa7cbbbb 100644
@@ -144,7 +144,6 @@ void save_mce_event(struct pt_regs *regs, long handled,
 		if (phys_addr != ULONG_MAX) {
 			mce->u.ue_error.physical_address_provided = true;
 			mce->u.ue_error.physical_address = phys_addr;
-			machine_check_ue_event(mce);
 		}
 	}
 	return;
@@ -275,8 +274,7 @@ static void machine_process_ue_event(struct work_struct *work)
 	}
 }
 /*
- * process pending MCE event from the mce event queue. This function will be
- * called during syscall exit.
+ * process pending MCE event from the mce event queue.
  */
 static void machine_check_process_queued_event(struct irq_work *work)
 {
@@ -292,6 +290,10 @@ static void machine_check_process_queued_event(struct irq_work *work)
 	while (__this_cpu_read(mce_queue_count) > 0) {
 		index = __this_cpu_read(mce_queue_count) - 1;
 		evt = this_cpu_ptr(&mce_event_queue[index]);
+
+		if (evt->error_type == MCE_ERROR_TYPE_UE)
+			machine_check_ue_event(evt);
+
 		machine_check_print_event_info(evt, false, false);
 		__this_cpu_dec(mce_queue_count);
 	}
Signature · 1 line
2.20.1
#2 lore raw

PATCH v7 2/7 powerpc/mce: Make machine_check_ue_event() static

In reply to Santosh Sivaraj

From: Reza Arbab <[email protected]>

The function doesn't get used outside this file, so make it static.

---
 arch/powerpc/kernel/mce.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/powerpc/kernel/mce.c +2 -2
index 0ab6fa7cbbbb..8c0b471658a7 100644
@@ -33,7 +33,7 @@ static DEFINE_PER_CPU(struct machine_check_event[MAX_MC_EVT],
 					mce_ue_event_queue);
 
 static void machine_check_process_queued_event(struct irq_work *work);
-void machine_check_ue_event(struct machine_check_event *evt);
+static void machine_check_ue_event(struct machine_check_event *evt);
 static void machine_process_ue_event(struct work_struct *work);
 
 static struct irq_work mce_event_process_work = {
@@ -202,7 +202,7 @@ void release_mce_event(void)
 /*
  * Queue up the MCE event which then can be handled later.
  */
-void machine_check_ue_event(struct machine_check_event *evt)
+static void machine_check_ue_event(struct machine_check_event *evt)
 {
 	int index;
 
Signature · 1 line
2.20.1
#3 lore raw

PATCH v7 3/7 powerpc/mce: Fix MCE handling for huge pages

In reply to Santosh Sivaraj

From: Balbir Singh <[email protected]>

The current code would fail on huge pages addresses, since the shift would be incorrect. Use the correct page shift value returned by __find_linux_pte() to get the correct physical address. The code is more generic and can handle both regular and compound pages.

Fixes ba41e1e1ccb9 ("powerpc/mce: Hookup derror (load/store) UE errors")
[[email protected]: Fixup pseries_do_memory_failure()]
[santosh: return physical address instead of pfn; change commit log]
---
 arch/powerpc/include/asm/mce.h       |  2 +-
 arch/powerpc/kernel/mce_power.c      | 50 ++++++++++++++--------------
 arch/powerpc/platforms/pseries/ras.c |  9 ++---
 3 files changed, 29 insertions(+), 32 deletions(-)
arch/powerpc/include/asm/mce.h +1 -1
index a4c6a74ad2fb..f3a6036b6bc0 100644
@@ -209,7 +209,7 @@ extern void release_mce_event(void);
 extern void machine_check_queue_event(void);
 extern void machine_check_print_event_info(struct machine_check_event *evt,
 					   bool user_mode, bool in_guest);
-unsigned long addr_to_pfn(struct pt_regs *regs, unsigned long addr);
+unsigned long addr_to_phys(struct pt_regs *regs, unsigned long addr);
 #ifdef CONFIG_PPC_BOOK3S_64
 void flush_and_reload_slb(void);
 #endif /* CONFIG_PPC_BOOK3S_64 */
arch/powerpc/kernel/mce_power.c +25 -25

85 lines not on this page · raw message

arch/powerpc/platforms/pseries/ras.c +3 -6
index f16fdd0f71f7..5743f6353638 100644
@@ -739,13 +739,10 @@ static void pseries_do_memory_failure(struct pt_regs *regs,
 	if (mce_log->sub_err_type & UE_LOGICAL_ADDR_PROVIDED) {
 		paddr = be64_to_cpu(mce_log->logical_address);
 	} else if (mce_log->sub_err_type & UE_EFFECTIVE_ADDR_PROVIDED) {
-		unsigned long pfn;
-
-		pfn = addr_to_pfn(regs,
-				  be64_to_cpu(mce_log->effective_address));
-		if (pfn == ULONG_MAX)
+		paddr = addr_to_phys(regs,
+				     be64_to_cpu(mce_log->effective_address));
+		if (paddr == ULONG_MAX)
 			return;
-		paddr = pfn << PAGE_SHIFT;
 	} else {
 		return;
 	}
Signature · 1 line
2.20.1
#4 lore raw

PATCH v7 4/7 extable: Add function to search only kernel exception table

In reply to Santosh Sivaraj

Certain architecture specific operating modes (e.g., in powerpc machine check handler that is unable to access vmalloc memory), the search_exception_tables cannot be called because it also searches the module exception tables if entry is not found in the kernel exception table.

Cc Thomas Gleixner <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Nicholas Piggin <[email protected]>
---
 include/linux/extable.h |  2 ++
 kernel/extable.c        | 11 +++++++++--
 2 files changed, 11 insertions(+), 2 deletions(-)
include/linux/extable.h +2 -0
index 41c5b3a25f67..81ecfaa83ad3 100644
@@ -19,6 +19,8 @@ void trim_init_extable(struct module *m);
 
 /* Given an address, look for it in the exception tables */
 const struct exception_table_entry *search_exception_tables(unsigned long add);
+const struct exception_table_entry *
+search_kernel_exception_table(unsigned long addr);
 
 #ifdef CONFIG_MODULES
 /* For extable.c to search modules' exception tables. */
kernel/extable.c +9 -2
index e23cce6e6092..f6c9406eec7d 100644
@@ -40,13 +40,20 @@ void __init sort_main_extable(void)
 	}
 }
 
+/* Given an address, look for it in the kernel exception table */
+const
+struct exception_table_entry *search_kernel_exception_table(unsigned long addr)
+{
+	return search_extable(__start___ex_table,
+			      __stop___ex_table - __start___ex_table, addr);
+}
+
 /* Given an address, look for it in the exception tables. */
 const struct exception_table_entry *search_exception_tables(unsigned long addr)
 {
 	const struct exception_table_entry *e;
 
-	e = search_extable(__start___ex_table,
-			   __stop___ex_table - __start___ex_table, addr);
+	e = search_kernel_exception_table(addr);
 	if (!e)
 		e = search_module_extables(addr);
 	return e;
Signature · 1 line
2.20.1
#5 lore raw

PATCH v7 5/7 powerpc/memcpy: Add memcpy_mcsafe for pmem

In reply to Santosh Sivaraj

From: Balbir Singh <[email protected]>

The pmem infrastructure uses memcpy_mcsafe in the pmem layer so as to convert machine check exceptions into a return value on failure in case a machine check exception is encountered during the memcpy. The return value is the number of bytes remaining to be copied.

This patch largely borrows from the copyuser_power7 logic and does not add the VMX optimizations, largely to keep the patch simple. If needed those optimizations can be folded in.

[[email protected]: Added symbol export]
[santosh: return remaining bytes instead of -EFAULT]
---
 arch/powerpc/include/asm/string.h   |   2 +
 arch/powerpc/lib/Makefile           |   2 +-
 arch/powerpc/lib/memcpy_mcsafe_64.S | 239 ++++++++++++++++++++++++++++
 3 files changed, 242 insertions(+), 1 deletion(-)
 create mode 100644 arch/powerpc/lib/memcpy_mcsafe_64.S
arch/powerpc/include/asm/string.h +2 -0
index 9bf6dffb4090..b72692702f35 100644
@@ -53,7 +53,9 @@ void *__memmove(void *to, const void *from, __kernel_size_t n);
 #ifndef CONFIG_KASAN
 #define __HAVE_ARCH_MEMSET32
 #define __HAVE_ARCH_MEMSET64
+#define __HAVE_ARCH_MEMCPY_MCSAFE
 
+extern int memcpy_mcsafe(void *dst, const void *src, __kernel_size_t sz);
 extern void *__memset16(uint16_t *, uint16_t v, __kernel_size_t);
 extern void *__memset32(uint32_t *, uint32_t v, __kernel_size_t);
 extern void *__memset64(uint64_t *, uint64_t v, __kernel_size_t);
arch/powerpc/lib/Makefile +1 -1
index eebc782d89a5..fa6b1b657b43 100644
@@ -39,7 +39,7 @@ obj-$(CONFIG_PPC_BOOK3S_64) += copyuser_power7.o copypage_power7.o \
 			       memcpy_power7.o
 
 obj64-y	+= copypage_64.o copyuser_64.o mem_64.o hweight_64.o \
-	   memcpy_64.o pmem.o
+	   memcpy_64.o pmem.o memcpy_mcsafe_64.o
 
 obj64-$(CONFIG_SMP)	+= locks.o
 obj64-$(CONFIG_ALTIVEC)	+= vmx-helper.o
arch/powerpc/lib/memcpy_mcsafe_64.S new file +239 -0

239 lines not on this page · raw message

Signature · 1 line
2.20.1
#6 lore raw

PATCH v7 6/7 powerpc/mce: Handle UE event for memcpy_mcsafe

In reply to Santosh Sivaraj

If we take a UE on one of the instructions with a fixup entry, set nip to continue execution at the fixup entry. Stop processing the event further or print it.

Cc Reza Arbab <[email protected]>
Cc Mahesh Salgaonkar <[email protected]>
---
 arch/powerpc/include/asm/mce.h  |  4 +++-
 arch/powerpc/kernel/mce.c       | 13 +++++++++++--
 arch/powerpc/kernel/mce_power.c | 15 +++++++++++++--
 3 files changed, 27 insertions(+), 5 deletions(-)
arch/powerpc/include/asm/mce.h +3 -1
index f3a6036b6bc0..e1931c8c2743 100644
@@ -122,7 +122,8 @@ struct machine_check_event {
 			enum MCE_UeErrorType ue_error_type:8;
 			u8		effective_address_provided;
 			u8		physical_address_provided;
-			u8		reserved_1[5];
+			u8		ignore_event;
+			u8		reserved_1[4];
 			u64		effective_address;
 			u64		physical_address;
 			u8		reserved_2[8];
@@ -193,6 +194,7 @@ struct mce_error_info {
 	enum MCE_Initiator	initiator:8;
 	enum MCE_ErrorClass	error_class:8;
 	bool			sync_error;
+	bool			ignore_event;
 };
 
 #define MAX_MC_EVT	100
arch/powerpc/kernel/mce.c +11 -2
index 8c0b471658a7..7a9a0bf6d614 100644
@@ -144,6 +144,7 @@ void save_mce_event(struct pt_regs *regs, long handled,
 		if (phys_addr != ULONG_MAX) {
 			mce->u.ue_error.physical_address_provided = true;
 			mce->u.ue_error.physical_address = phys_addr;
+			mce->u.ue_error.ignore_event = mce_err->ignore_event;
 		}
 	}
 	return;
@@ -256,8 +257,13 @@ static void machine_process_ue_event(struct work_struct *work)
 		/*
 		 * This should probably queued elsewhere, but
 		 * oh! well
+		 *
+		 * Don't report this machine check because the caller has a
+		 * asked us to ignore the event, it has a fixup handler which
+		 * will do the appropriate error handling and reporting.
 		 */
-		if (evt->error_type == MCE_ERROR_TYPE_UE) {
+		if (evt->error_type == MCE_ERROR_TYPE_UE &&
+		    !evt->u.ue_error.ignore_event) {
 			if (evt->u.ue_error.physical_address_provided) {
 				unsigned long pfn;
 
@@ -291,8 +297,11 @@ static void machine_check_process_queued_event(struct irq_work *work)
 		index = __this_cpu_read(mce_queue_count) - 1;
 		evt = this_cpu_ptr(&mce_event_queue[index]);
 
-		if (evt->error_type == MCE_ERROR_TYPE_UE)
+		if (evt->error_type == MCE_ERROR_TYPE_UE) {
 			machine_check_ue_event(evt);
+			if (evt->u.ue_error.ignore_event)
+				return;
+		}
 
 		machine_check_print_event_info(evt, false, false);
 		__this_cpu_dec(mce_queue_count);
arch/powerpc/kernel/mce_power.c +13 -2
index bed38a8e2e50..36ca45bbb273 100644
@@ -11,6 +11,7 @@
 
 #include <linux/types.h>
 #include <linux/ptrace.h>
+#include <linux/extable.h>
 #include <asm/mmu.h>
 #include <asm/mce.h>
 #include <asm/machdep.h>
@@ -18,6 +19,7 @@
 #include <asm/pte-walk.h>
 #include <asm/sstep.h>
 #include <asm/exception-64s.h>
+#include <asm/extable.h>
 
 /*
  * Convert an address related to an mm to a physical address.
@@ -558,9 +560,18 @@ static int mce_handle_derror(struct pt_regs *regs,
 	return 0;
 }
 
-static long mce_handle_ue_error(struct pt_regs *regs)
+static long mce_handle_ue_error(struct pt_regs *regs,
+				struct mce_error_info *mce_err)
 {
 	long handled = 0;
+	const struct exception_table_entry *entry;
+
+	entry = search_kernel_exception_table(regs->nip);
+	if (entry) {
+		mce_err->ignore_event = true;
+		regs->nip = extable_fixup(entry);
+		return 1;
+	}
 
 	/*
 	 * On specific SCOM read via MMIO we may get a machine check
@@ -593,7 +604,7 @@ static long mce_handle_error(struct pt_regs *regs,
 				&phys_addr);
 
 	if (!handled && mce_err.error_type == MCE_ERROR_TYPE_UE)
-		handled = mce_handle_ue_error(regs);
+		handled = mce_handle_ue_error(regs, &mce_err);
 
 	save_mce_event(regs, handled, &mce_err, regs->nip, addr, phys_addr);
 
Signature · 1 line
2.20.1
#7 lore raw

PATCH v7 7/7 powerpc: add machine check safe copy_to_user

In reply to Santosh Sivaraj

Use memcpy_mcsafe() implementation to define copy_to_user_mcsafe()

---
 arch/powerpc/Kconfig               |  1 +
 arch/powerpc/include/asm/uaccess.h | 14 ++++++++++++++
 2 files changed, 15 insertions(+)
arch/powerpc/Kconfig +1 -0
index 77f6ebf97113..4316e36095a2 100644
@@ -137,6 +137,7 @@ config PPC
 	select ARCH_HAS_STRICT_KERNEL_RWX	if ((PPC_BOOK3S_64 || PPC32) && !RELOCATABLE && !HIBERNATION)
 	select ARCH_HAS_TICK_BROADCAST		if GENERIC_CLOCKEVENTS_BROADCAST
 	select ARCH_HAS_UACCESS_FLUSHCACHE	if PPC64
+	select ARCH_HAS_UACCESS_MCSAFE		if PPC64
 	select ARCH_HAS_UBSAN_SANITIZE_ALL
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select ARCH_KEEP_MEMBLOCK
arch/powerpc/include/asm/uaccess.h +14 -0
index 8b03eb44e876..15002b51ff18 100644
@@ -387,6 +387,20 @@ static inline unsigned long raw_copy_to_user(void __user *to,
 	return ret;
 }
 
+static __always_inline unsigned long __must_check
+copy_to_user_mcsafe(void __user *to, const void *from, unsigned long n)
+{
+	if (likely(check_copy_size(from, n, true))) {
+		if (access_ok(to, n)) {
+			allow_write_to_user(to, n);
+			n = memcpy_mcsafe((void *)to, from, n);
+			prevent_write_to_user(to, n);
+		}
+	}
+
+	return n;
+}
+
 extern unsigned long __clear_user(void __user *addr, unsigned long size);
 
 static inline unsigned long clear_user(void __user *addr, unsigned long size)
Signature · 1 line
2.20.1