Skip to contentSkip to conversation

s390x: MMU changes and extensions

PATCH In review David Hildenbrand 3 participants 35 messages Aug 5, 2019 – Aug 19, 2019

lore
Share & tools
lore
#0 lore raw

cover s390x: MMU changes and extensions

This series rewrites the MMU DAT translation code completely, adds EDAT2 MMU support, and implements/indicates related facilities (ESOP-1, ESOP-2, IEP, ...) for TCG. The QEMU CPU model is updated.

This series is based on the new 4.2 compat machines from Cornelia.

Cc Ilya Leoshkevich <[email protected]>

David Hildenbrand (9):
s390x/mmu: Better ASC selection in s390_cpu_get_phys_page_debug() s390x/tcg: Rework MMU selection for instruction fetches s390x/mmu: DAT translation rewrite
s390x/mmu: Add EDAT2 translation support
s390x/mmu: Implement access-exception-fetch/store-indication facility s390x/mmu: Implement enhanced suppression-on-protection facility 2 s390x/mmu: Implement Instruction-Execution-Protection Facility s390x/cpumodel: Prepare for changes of QEMU model s390x/cpumodel: Add new TCG features to QEMU cpu model

 hw/s390x/s390-virtio-ccw.c  |   2 +
 target/s390x/cpu.h          |  85 ++++++--
 target/s390x/gen-features.c |  10 +-
 target/s390x/helper.c       |  10 +-
 target/s390x/mem_helper.c   |  13 +-
 target/s390x/mmu_helper.c   | 410 ++++++++++++++++++------------------
 6 files changed, 294 insertions(+), 236 deletions(-)
Signature · 1 line
2.21.0
#1 lore raw

PATCH 1/9 s390x/mmu: Better ASC selection in s390_cpu_get_phys_page_debug()

Let's select the ASC before calling the function and use MMU_DATA_LOAD. This is a preparation to:
- Remove the ASC magic depending on the access mode from mmu_translate
- Implement IEP support, where we could run into access exceptions trying to fetch instructions

---
 target/s390x/helper.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
target/s390x/helper.c +9 -1
index 13ae9909ad..08166558a0 100644
@@ -58,7 +58,15 @@ hwaddr s390_cpu_get_phys_page_debug(CPUState *cs, vaddr vaddr)
         vaddr &= 0x7fffffff;
     }
 
-    if (mmu_translate(env, vaddr, MMU_INST_FETCH, asc, &raddr, &prot, false)) {
+    /*
+     * We want to read the code, however, not run into access exceptions
+     * (especially, IEP).
+     */
+    if (asc != PSW_ASC_HOME) {
+        asc = PSW_ASC_PRIMARY;
+    }
+
+    if (mmu_translate(env, vaddr, MMU_DATA_LOAD, asc, &raddr, &prot, false)) {
         return -1;
     }
     return raddr;
Signature · 1 line
2.21.0
#2 lore raw

Re: [Qemu-devel] [PATCH-for-4.2 v1 1/9] s390x/mmu: Better ASC selection in s390_cpu_get_phys_page_debug()

Quoted 4 lines · On Mon, 5 Aug 2019 17:29:39 +0200 David Hildenbrand <[email protected]> wrote:

Let's select the ASC before calling the function and use MMU_DATA_LOAD. This is a preparation to:
- Remove the ASC magic depending on the access mode from mmu_translate
- Implement IEP support, where we could run into access exceptions

'IEP' was instruction execution protection?

Quoted 13 lines

trying to fetch instructions

---
 target/s390x/helper.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
target/s390x/helper.c +0 -0
index 13ae9909ad..08166558a0 100644
@@ -58,7 +58,15 @@ hwaddr s390_cpu_get_phys_page_debug(CPUState *cs, vaddr vaddr)
         vaddr &= 0x7fffffff;

target/s390x/helper.c hwaddr s390_cpu_get_phys_page_debug(CPUState *cs, vaddr vaddr) · line 67

Quoted 10 lines
target/s390x/helper.c +7 -1
     }
 
-    if (mmu_translate(env, vaddr, MMU_INST_FETCH, asc, &raddr, &prot, false)) {
+    /*
+     * We want to read the code, however, not run into access exceptions
+     * (especially, IEP).
+     */
+    if (asc != PSW_ASC_HOME) {
+        asc = PSW_ASC_PRIMARY;
+    }

Previously, if we'd go in here specifying access register mode, we'd hw_error() out. Now, that would be rewritten to using primary. Could that be a problem, or do we filter out access register mode even earlier?

(As an aside, I'm not sure the guest crashing qemu by specifying access register mode was a good idea. Or do we get to slap the guest before that happens?)

Quoted 5 lines
target/s390x/helper.c +2 -0
+
+    if (mmu_translate(env, vaddr, MMU_DATA_LOAD, asc, &raddr, &prot, false)) {
         return -1;
     }
     return raddr;
#3 lore raw

Re: [Qemu-devel] [PATCH-for-4.2 v1 1/9] s390x/mmu: Better ASC selection in s390_cpu_get_phys_page_debug()

Quoted 25 lines · Cornelia Huck
Quoted 4 lines · On Mon, 5 Aug 2019 17:29:39 +0200 David Hildenbrand <[email protected]> wrote:

Let's select the ASC before calling the function and use MMU_DATA_LOAD. This is a preparation to:
- Remove the ASC magic depending on the access mode from mmu_translate
- Implement IEP support, where we could run into access exceptions

'IEP' was instruction execution protection?

Quoted 15 lines

trying to fetch instructions

---
 target/s390x/helper.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
target/s390x/helper.c +0 -0
index 13ae9909ad..08166558a0 100644
@@ -58,7 +58,15 @@ hwaddr s390_cpu_get_phys_page_debug(CPUState *cs, vaddr vaddr)
         vaddr &= 0x7fffffff;
     }
 
Quoted 13 lines

target/s390x/helper.c hwaddr s390_cpu_get_phys_page_debug(CPUState *cs, vaddr vaddr) · line 67

Quoted 8 lines
target/s390x/helper.c +7 -1
-    if (mmu_translate(env, vaddr, MMU_INST_FETCH, asc, &raddr, &prot, false)) {
+    /*
+     * We want to read the code, however, not run into access exceptions
+     * (especially, IEP).
+     */
+    if (asc != PSW_ASC_HOME) {
+        asc = PSW_ASC_PRIMARY;
+    }

Previously, if we'd go in here specifying access register mode, we'd hw_error() out. Now, that would be rewritten to using primary. Could that be a problem, or do we filter out access register mode even earlier?

As this is just a debug interface it's not an issue (it actually makes sure that we really read code and not data). Any guest that would be trying to read data while in AR mode would immediately crash.

Quoted 4 lines

(As an aside, I'm not sure the guest crashing qemu by specifying access register mode was a good idea. Or do we get to slap the guest before that happens?)

I guess there isn't too much we can do - continue running the guest in a wrong mode would lead to data corruption :/ And as it's core ISA, we cannot really forbid switching to it. The only solution is to implement AR mode :D

Signature · 3 lines
Thanks,

David / dhildenb
#4 lore raw

Re: [Qemu-devel] [PATCH-for-4.2 v1 1/9] s390x/mmu: Better ASC selection in s390_cpu_get_phys_page_debug()

In reply to David Hildenbrand
Quoted 16 lines · David Hildenbrand

Let's select the ASC before calling the function and use MMU_DATA_LOAD. This is a preparation to:
- Remove the ASC magic depending on the access mode from mmu_translate
- Implement IEP support, where we could run into access exceptions trying to fetch instructions

---
 target/s390x/helper.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
target/s390x/helper.c +0 -0
index 13ae9909ad..08166558a0 100644

target/s390x/helper.c hwaddr s390_cpu_get_phys_page_debug(CPUState *cs, vaddr vaddr) · line 62

Quoted 6 lines
target/s390x/helper.c +2 -1
@@ -58,7 +58,15 @@ hwaddr s390_cpu_get_phys_page_debug(CPUState *cs, vaddr vaddr)
         vaddr &= 0x7fffffff;
     }
 
-    if (mmu_translate(env, vaddr, MMU_INST_FETCH, asc, &raddr, &prot, false)) {
+    /*
+     * We want to read the code, however, not run into access exceptions

Is this really a safe assumption here that we always use this to translate code addresses and not data addresses? ... I don't think so. For example with the "gva2gpa" HMP command, I'd rather expect that it also works with the secondary space mode...?

So maybe we need a proper MemTxAttrs bit or something similar for distinguishing instruction accesses from data accesses here?

Thomas

#5 lore raw

Re: [Qemu-devel] [PATCH-for-4.2 v1 1/9] s390x/mmu: Better ASC selection in s390_cpu_get_phys_page_debug()

Quoted 20 lines · Thomas Huth
Quoted 19 lines · David Hildenbrand

Let's select the ASC before calling the function and use MMU_DATA_LOAD. This is a preparation to:
- Remove the ASC magic depending on the access mode from mmu_translate
- Implement IEP support, where we could run into access exceptions trying to fetch instructions

---
 target/s390x/helper.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
target/s390x/helper.c +0 -0
index 13ae9909ad..08166558a0 100644
@@ -58,7 +58,15 @@ hwaddr s390_cpu_get_phys_page_debug(CPUState *cs, vaddr vaddr)
         vaddr &= 0x7fffffff;
     }
 
Quoted 8 lines

target/s390x/helper.c hwaddr s390_cpu_get_phys_page_debug(CPUState *cs, vaddr vaddr) · line 62

Quoted 3 lines
target/s390x/helper.c +2 -1
-    if (mmu_translate(env, vaddr, MMU_INST_FETCH, asc, &raddr, &prot, false)) {
+    /*
+     * We want to read the code, however, not run into access exceptions

Is this really a safe assumption here that we always use this to translate code addresses and not data addresses? ... I don't think so. For example with the "gva2gpa" HMP command, I'd rather expect that it also works with the secondary space mode...?

Well, it's what current code does. I am not changing that behavior.

While it is in general broken to have a single interface to debug code+data (which is only a problem on s390x), it makes a lot of sense if you think about single-stepping through disassembled code using the gdbstub. Or dumping code where you crashed.

In Linux, code+data will luckily usually have the same virtual->physical tables, so it's not a real issue.

Quoted 3 lines

So maybe we need a proper MemTxAttrs bit or something similar for distinguishing instruction accesses from data accesses here?

There would first have to be a way to ask "get_phys_page_debug" to get code or data for this to make sense. Right now we used it to get code.

Thanks.

Signature · 3 lines
Thanks,

David / dhildenb
#6 lore raw

Re: [Qemu-devel] [PATCH-for-4.2 v1 1/9] s390x/mmu: Better ASC selection in s390_cpu_get_phys_page_debug()

Quoted 30 lines · On Mon, 12 Aug 2019 09:52:56 +0200 David Hildenbrand <[email protected]> wrote:
Quoted 20 lines · Thomas Huth
Quoted 19 lines · David Hildenbrand

Let's select the ASC before calling the function and use MMU_DATA_LOAD. This is a preparation to:
- Remove the ASC magic depending on the access mode from mmu_translate
- Implement IEP support, where we could run into access exceptions trying to fetch instructions

---
 target/s390x/helper.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
target/s390x/helper.c +0 -0
index 13ae9909ad..08166558a0 100644
@@ -58,7 +58,15 @@ hwaddr s390_cpu_get_phys_page_debug(CPUState *cs, vaddr vaddr)
         vaddr &= 0x7fffffff;
     }
 
Quoted 8 lines

target/s390x/helper.c hwaddr s390_cpu_get_phys_page_debug(CPUState *cs, vaddr vaddr) · line 62

Quoted 3 lines
target/s390x/helper.c +2 -1
-    if (mmu_translate(env, vaddr, MMU_INST_FETCH, asc, &raddr, &prot, false)) {
+    /*
+     * We want to read the code, however, not run into access exceptions  

Is this really a safe assumption here that we always use this to translate code addresses and not data addresses? ... I don't think so. For example with the "gva2gpa" HMP command, I'd rather expect that it also works with the secondary space mode...?

Quoted 1 line

Well, it's what current code does. I am not changing that behavior.

Agreed, that is not actively breaking something.

Quoted 5 lines

While it is in general broken to have a single interface to debug code+data (which is only a problem on s390x), it makes a lot of sense if you think about single-stepping through disassembled code using the gdbstub. Or dumping code where you crashed.

What about the memsave interface?

Quoted 10 lines

In Linux, code+data will luckily usually have the same virtual->physical tables, so it's not a real issue.

Quoted 3 lines

So maybe we need a proper MemTxAttrs bit or something similar for distinguishing instruction accesses from data accesses here?

There would first have to be a way to ask "get_phys_page_debug" to get code or data for this to make sense. Right now we used it to get code.

I'm wondering if we're able to do better; but if the code/data distinction is not considered in architecture independent code, probably not easily.

#7 lore raw

Re: [Qemu-devel] [PATCH-for-4.2 v1 1/9] s390x/mmu: Better ASC selection in s390_cpu_get_phys_page_debug()

Quoted 38 lines · Cornelia Huck
Quoted 30 lines · On Mon, 12 Aug 2019 09:52:56 +0200 David Hildenbrand <[email protected]> wrote:
Quoted 20 lines · Thomas Huth
Quoted 19 lines · David Hildenbrand

Let's select the ASC before calling the function and use MMU_DATA_LOAD. This is a preparation to:
- Remove the ASC magic depending on the access mode from mmu_translate
- Implement IEP support, where we could run into access exceptions trying to fetch instructions

---
 target/s390x/helper.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
target/s390x/helper.c +0 -0
index 13ae9909ad..08166558a0 100644
@@ -58,7 +58,15 @@ hwaddr s390_cpu_get_phys_page_debug(CPUState *cs, vaddr vaddr)
         vaddr &= 0x7fffffff;
     }
 
Quoted 8 lines

target/s390x/helper.c hwaddr s390_cpu_get_phys_page_debug(CPUState *cs, vaddr vaddr) · line 62

Quoted 3 lines
target/s390x/helper.c +2 -1
-    if (mmu_translate(env, vaddr, MMU_INST_FETCH, asc, &raddr, &prot, false)) {
+    /*
+     * We want to read the code, however, not run into access exceptions  

Is this really a safe assumption here that we always use this to translate code addresses and not data addresses? ... I don't think so. For example with the "gva2gpa" HMP command, I'd rather expect that it also works with the secondary space mode...?

Quoted 1 line

Well, it's what current code does. I am not changing that behavior.

Agreed, that is not actively breaking something.

Quoted 1 line
Quoted 6 lines
Quoted 4 lines

While it is in general broken to have a single interface to debug code+data (which is only a problem on s390x), it makes a lot of sense if you think about single-stepping through disassembled code using the gdbstub. Or dumping code where you crashed.

What about the memsave interface?

I guess the same problem:

"save to disk virtual memory dump starting at @var{addr} of size @var{size}" - which virtual memory (code vs. data)? These old interface are really x86 specific (meaning: it made sense this way for x86)

I'd like to note that if our KVM guest is in AR mode, we would now no longer be able to crash it :) (well, a nice side-effect of instruction fetches not going via AR mode).

Signature · 3 lines
Thanks,

David / dhildenb
#8 lore raw

Re: [Qemu-devel] [PATCH-for-4.2 v1 1/9] s390x/mmu: Better ASC selection in s390_cpu_get_phys_page_debug()

Quoted 44 lines · On Mon, 12 Aug 2019 15:45:25 +0200 David Hildenbrand <[email protected]> wrote:
Quoted 43 lines · Cornelia Huck
Quoted 30 lines · On Mon, 12 Aug 2019 09:52:56 +0200 David Hildenbrand <[email protected]> wrote:
Quoted 20 lines · Thomas Huth
Quoted 19 lines · David Hildenbrand

Let's select the ASC before calling the function and use MMU_DATA_LOAD. This is a preparation to:
- Remove the ASC magic depending on the access mode from mmu_translate
- Implement IEP support, where we could run into access exceptions trying to fetch instructions

---
 target/s390x/helper.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
target/s390x/helper.c +0 -0
index 13ae9909ad..08166558a0 100644
@@ -58,7 +58,15 @@ hwaddr s390_cpu_get_phys_page_debug(CPUState *cs, vaddr vaddr)
         vaddr &= 0x7fffffff;
     }
 
Quoted 8 lines

target/s390x/helper.c hwaddr s390_cpu_get_phys_page_debug(CPUState *cs, vaddr vaddr) · line 62

Quoted 3 lines
target/s390x/helper.c +2 -1
-    if (mmu_translate(env, vaddr, MMU_INST_FETCH, asc, &raddr, &prot, false)) {
+    /*
+     * We want to read the code, however, not run into access exceptions    

Is this really a safe assumption here that we always use this to translate code addresses and not data addresses? ... I don't think so. For example with the "gva2gpa" HMP command, I'd rather expect that it also works with the secondary space mode...?

Quoted 1 line

Well, it's what current code does. I am not changing that behavior.

Agreed, that is not actively breaking something.

Quoted 5 lines

While it is in general broken to have a single interface to debug code+data (which is only a problem on s390x), it makes a lot of sense if you think about single-stepping through disassembled code using the gdbstub. Or dumping code where you crashed.

Quoted 7 lines
Quoted 1 line

What about the memsave interface?

I guess the same problem:

"save to disk virtual memory dump starting at @var{addr} of size @var{size}" - which virtual memory (code vs. data)? These old interface are really x86 specific (meaning: it made sense this way for x86)

So, the general verdict is "gnarly interface, but at least not broken for Linux guests", I guess.

Quoted 4 lines

I'd like to note that if our KVM guest is in AR mode, we would now no longer be able to crash it :) (well, a nice side-effect of instruction fetches not going via AR mode).

Heh :)

Q: What do we need to consider beyond Linux guests? Probably not much, given that they would be broken already...

#9 lore raw

Re: [Qemu-devel] [PATCH-for-4.2 v1 1/9] s390x/mmu: Better ASC selection in s390_cpu_get_phys_page_debug()

Quoted 59 lines · Cornelia Huck
Quoted 44 lines · On Mon, 12 Aug 2019 15:45:25 +0200 David Hildenbrand <[email protected]> wrote:
Quoted 43 lines · Cornelia Huck
Quoted 30 lines · On Mon, 12 Aug 2019 09:52:56 +0200 David Hildenbrand <[email protected]> wrote:
Quoted 20 lines · Thomas Huth
Quoted 19 lines · David Hildenbrand

Let's select the ASC before calling the function and use MMU_DATA_LOAD. This is a preparation to:
- Remove the ASC magic depending on the access mode from mmu_translate
- Implement IEP support, where we could run into access exceptions trying to fetch instructions

---
 target/s390x/helper.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
target/s390x/helper.c +0 -0
index 13ae9909ad..08166558a0 100644
@@ -58,7 +58,15 @@ hwaddr s390_cpu_get_phys_page_debug(CPUState *cs, vaddr vaddr)
         vaddr &= 0x7fffffff;
     }
 
Quoted 8 lines

target/s390x/helper.c hwaddr s390_cpu_get_phys_page_debug(CPUState *cs, vaddr vaddr) · line 62

Quoted 3 lines
target/s390x/helper.c +2 -1
-    if (mmu_translate(env, vaddr, MMU_INST_FETCH, asc, &raddr, &prot, false)) {
+    /*
+     * We want to read the code, however, not run into access exceptions    

Is this really a safe assumption here that we always use this to translate code addresses and not data addresses? ... I don't think so. For example with the "gva2gpa" HMP command, I'd rather expect that it also works with the secondary space mode...?

Quoted 1 line

Well, it's what current code does. I am not changing that behavior.

Agreed, that is not actively breaking something.

Quoted 5 lines

While it is in general broken to have a single interface to debug code+data (which is only a problem on s390x), it makes a lot of sense if you think about single-stepping through disassembled code using the gdbstub. Or dumping code where you crashed.

Quoted 7 lines
Quoted 1 line

What about the memsave interface?

I guess the same problem:

"save to disk virtual memory dump starting at @var{addr} of size @var{size}" - which virtual memory (code vs. data)? These old interface are really x86 specific (meaning: it made sense this way for x86)

So, the general verdict is "gnarly interface, but at least not broken for Linux guests", I guess.

Quoted 1 line
Quoted 9 lines
Quoted 3 lines

I'd like to note that if our KVM guest is in AR mode, we would now no longer be able to crash it :) (well, a nice side-effect of instruction fetches not going via AR mode).

Heh :)

Q: What do we need to consider beyond Linux guests? Probably not much, given that they would be broken already...

I think Linux guests only use AR mode for some instances of vDSO, but I don't recall the details (and why it never was an issue for TCG, where we fail hard early). Apart from that, I don't think we have to consider other guests (kvm-unit-tests ...).

Signature · 3 lines
Thanks,

David / dhildenb
#10 lore raw

PATCH 2/9 s390x/tcg: Rework MMU selection for instruction fetches

In reply to David Hildenbrand

Instructions are always fetched from primary address space, except when in home address mode. Perform the selection directly in cpu_mmu_index().

get_mem_index() is only used to perform data access, instructions are fetched via cpu_lduw_code(), which translates to cpu_mmu_index(env, true).

We don't care about restricting the access permissions of the TLB entries anymore, as we no longer enter PRIMARY entries into the SECONDARY MMU.

---
 target/s390x/cpu.h        |  7 +++++++
 target/s390x/mmu_helper.c | 15 ++-------------
 2 files changed, 9 insertions(+), 13 deletions(-)
target/s390x/cpu.h +7 -0
index a606547b4d..c34992bb2e 100644
@@ -332,6 +332,13 @@ static inline int cpu_mmu_index(CPUS390XState *env, bool ifetch)
         return MMU_REAL_IDX;
     }
 
+    if (ifetch) {
+        if ((env->psw.mask & PSW_MASK_ASC) == PSW_ASC_HOME) {
+            return MMU_HOME_IDX;
+        }
+        return MMU_PRIMARY_IDX;
+    }
+
     switch (env->psw.mask & PSW_MASK_ASC) {
     case PSW_ASC_PRIMARY:
         return MMU_PRIMARY_IDX;
target/s390x/mmu_helper.c +2 -13
index 6e9c4d6151..9c0d9b5c5f 100644
@@ -397,19 +397,8 @@ int mmu_translate(CPUS390XState *env, target_ulong vaddr, int rw, uint64_t asc,
         break;
     case PSW_ASC_SECONDARY:
         PTE_DPRINTF("%s: asc=secondary\n", __func__);
-        /*
-         * Instruction: Primary
-         * Data: Secondary
-         */
-        if (rw == MMU_INST_FETCH) {
-            r = mmu_translate_asce(env, vaddr, PSW_ASC_PRIMARY, env->cregs[1],
-                                   raddr, flags, rw, exc);
-            *flags &= ~(PAGE_READ | PAGE_WRITE);
-        } else {
-            r = mmu_translate_asce(env, vaddr, PSW_ASC_SECONDARY, env->cregs[7],
-                                   raddr, flags, rw, exc);
-            *flags &= ~(PAGE_EXEC);
-        }
+        r = mmu_translate_asce(env, vaddr, PSW_ASC_SECONDARY, env->cregs[7],
+                               raddr, flags, rw, exc);
         break;
     case PSW_ASC_ACCREG:
     default:
Signature · 1 line
2.21.0
#11 lore raw

PATCH 3/9 s390x/mmu: DAT translation rewrite

In reply to David Hildenbrand

Let's rewrite the DAT translation in a non-recursive way, similar to arch/s390/kvm/gaccess.c:guest_translate() in KVM. This makes the code much easier to read, compare and maintain.

Use better names for the region/section/page table entries and for the macros to extract relevant parts from virtual address. Introduce defines for all defined bits, this will come in handy soon.

All access exceptions now directly go via trigger_access_exception(), at a central point. DAT protection checks are performed at a central place.

Also, we now catch and indicate invalid addresses of page tables. All table entries are accessed via read_table_entry().

---
 target/s390x/cpu.h        |  77 +++++---
 target/s390x/mem_helper.c |  13 +-
 target/s390x/mmu_helper.c | 360 +++++++++++++++++---------------------
 3 files changed, 229 insertions(+), 221 deletions(-)
target/s390x/cpu.h +57 -20
index c34992bb2e..1ff14250bd 100644
@@ -554,26 +554,63 @@ QEMU_BUILD_BUG_ON(sizeof(SysIB) != 4096);
 #define ASCE_TYPE_SEGMENT     0x00        /* segment table type               */
 #define ASCE_TABLE_LENGTH     0x03        /* region table length              */
 
-#define REGION_ENTRY_ORIGIN   (~0xfffULL) /* region/segment table origin    */
-#define REGION_ENTRY_RO       0x200       /* region/segment protection bit  */
-#define REGION_ENTRY_TF       0xc0        /* region/segment table offset    */
-#define REGION_ENTRY_INV      0x20        /* invalid region table entry     */
-#define REGION_ENTRY_TYPE_MASK 0x0c       /* region/segment table type mask */
-#define REGION_ENTRY_TYPE_R1  0x0c        /* region first table type        */
-#define REGION_ENTRY_TYPE_R2  0x08        /* region second table type       */
-#define REGION_ENTRY_TYPE_R3  0x04        /* region third table type        */
-#define REGION_ENTRY_LENGTH   0x03        /* region third length            */
-
-#define SEGMENT_ENTRY_ORIGIN  (~0x7ffULL) /* segment table origin        */
-#define SEGMENT_ENTRY_FC      0x400       /* format control              */
-#define SEGMENT_ENTRY_RO      0x200       /* page protection bit         */
-#define SEGMENT_ENTRY_INV     0x20        /* invalid segment table entry */
-
-#define VADDR_PX              0xff000     /* page index bits   */
-
-#define PAGE_RO               0x200       /* HW read-only bit  */
-#define PAGE_INVALID          0x400       /* HW invalid bit    */
-#define PAGE_RES0             0x800       /* bit must be zero  */
+#define REGION_ENTRY_ORIGIN         0xfffffffffffff000ULL
+#define REGION_ENTRY_P              0x0000000000000200ULL
+#define REGION_ENTRY_TF             0x00000000000000c0ULL
+#define REGION_ENTRY_I              0x0000000000000020ULL
+#define REGION_ENTRY_TT             0x000000000000000cULL
+#define REGION_ENTRY_TL             0x0000000000000003ULL
+
+#define REGION_ENTRY_TT_REGION1     0x000000000000000cULL
+#define REGION_ENTRY_TT_REGION2     0x0000000000000008ULL
+#define REGION_ENTRY_TT_REGION3     0x0000000000000004ULL
+
+#define REGION3_ENTRY_RFAA          0xffffffff80000000ULL
+#define REGION3_ENTRY_AV            0x0000000000010000ULL
+#define REGION3_ENTRY_ACC           0x000000000000f000ULL
+#define REGION3_ENTRY_F             0x0000000000000800ULL
+#define REGION3_ENTRY_FC            0x0000000000000400ULL
+#define REGION3_ENTRY_IEP           0x0000000000000100ULL
+#define REGION3_ENTRY_CR            0x0000000000000010ULL
+
+#define SEGMENT_ENTRY_ORIGIN        0xfffffffffffff800ULL
+#define SEGMENT_ENTRY_SFAA          0xfffffffffff80000ULL
+#define SEGMENT_ENTRY_AV            0x0000000000010000ULL
+#define SEGMENT_ENTRY_ACC           0x000000000000f000ULL
+#define SEGMENT_ENTRY_F             0x0000000000000800ULL
+#define SEGMENT_ENTRY_FC            0x0000000000000400ULL
+#define SEGMENT_ENTRY_P             0x0000000000000200ULL
+#define SEGMENT_ENTRY_IEP           0x0000000000000100ULL
+#define SEGMENT_ENTRY_I             0x0000000000000020ULL
+#define SEGMENT_ENTRY_CS            0x0000000000000010ULL
+#define SEGMENT_ENTRY_TT            0x000000000000000cULL
+
+#define SEGMENT_ENTRY_TT_REGION1    0x000000000000000cULL
+#define SEGMENT_ENTRY_TT_REGION2    0x0000000000000008ULL
+#define SEGMENT_ENTRY_TT_REGION3    0x0000000000000004ULL
+#define SEGMENT_ENTRY_TT_SEGMENT    0x0000000000000000ULL
+
+#define PAGE_ENTRY_0                0x0000000000000800ULL
+#define PAGE_ENTRY_I                0x0000000000000400ULL
+#define PAGE_ENTRY_P                0x0000000000000200ULL
+#define PAGE_ENTRY_IEP              0x0000000000000100ULL
+
+#define VADDR_REGION1_TX_MASK       0xffe0000000000000ULL
+#define VADDR_REGION2_TX_MASK       0x001ffc0000000000ULL
+#define VADDR_REGION3_TX_MASK       0x000003ff80000000ULL
+#define VADDR_SEGMENT_TX_MASK       0x000000007ff00000ULL
+#define VADDR_PAGE_TX_MASK          0x00000000000ff000ULL
+
+#define VADDR_REGION1_TX(vaddr)     (((vaddr) & VADDR_REGION1_TX_MASK) >> 53)
+#define VADDR_REGION2_TX(vaddr)     (((vaddr) & VADDR_REGION2_TX_MASK) >> 42)
+#define VADDR_REGION3_TX(vaddr)     (((vaddr) & VADDR_REGION3_TX_MASK) >> 31)
+#define VADDR_SEGMENT_TX(vaddr)     (((vaddr) & VADDR_SEGMENT_TX_MASK) >> 20)
+#define VADDR_PAGE_TX(vaddr)        (((vaddr) & VADDR_PAGE_TX_MASK) >> 12)
+
+#define VADDR_REGION1_TL(vaddr)     (((vaddr) & 0xc000000000000000ULL) >> 62)
+#define VADDR_REGION2_TL(vaddr)     (((vaddr) & 0x0018000000000000ULL) >> 51)
+#define VADDR_REGION3_TL(vaddr)     (((vaddr) & 0x0000030000000000ULL) >> 40)
+#define VADDR_SEGMENT_TL(vaddr)     (((vaddr) & 0x0000000060000000ULL) >> 29)
 
 #define SK_C                    (0x1 << 1)
 #define SK_R                    (0x1 << 2)
target/s390x/mem_helper.c +7 -6
index 29d9eaa5b7..46cc0d66f7 100644
@@ -1936,9 +1936,9 @@ void HELPER(idte)(CPUS390XState *env, uint64_t r1, uint64_t r2, uint32_t m4)
             /* addresses are not wrapped in 24/31bit mode but table index is */
             raddr = table + ((index + i) & 0x7ff) * sizeof(entry);
             entry = cpu_ldq_real_ra(env, raddr, ra);
-            if (!(entry & REGION_ENTRY_INV)) {
+            if (!(entry & REGION_ENTRY_I)) {
                 /* we are allowed to not store if already invalid */
-                entry |= REGION_ENTRY_INV;
+                entry |= REGION_ENTRY_I;
                 cpu_stq_real_ra(env, raddr, entry, ra);
             }
         }
@@ -1963,17 +1963,18 @@ void HELPER(ipte)(CPUS390XState *env, uint64_t pto, uint64_t vaddr,
 
     /* Compute the page table entry address */
     pte_addr = (pto & SEGMENT_ENTRY_ORIGIN);
-    pte_addr += (vaddr & VADDR_PX) >> 9;
+    pte_addr += VADDR_PAGE_TX(vaddr) * 8;
 
     /* Mark the page table entry as invalid */
     pte = cpu_ldq_real_ra(env, pte_addr, ra);
-    pte |= PAGE_INVALID;
+    pte |= PAGE_ENTRY_I;
+
     cpu_stq_real_ra(env, pte_addr, pte, ra);
 
     /* XXX we exploit the fact that Linux passes the exact virtual
        address here - it's not obliged to! */
     if (m4 & 1) {
-        if (vaddr & ~VADDR_PX) {
+        if (vaddr & ~VADDR_PAGE_TX_MASK) {
             tlb_flush_page(cs, page);
             /* XXX 31-bit hack */
             tlb_flush_page(cs, page ^ 0x80000000);
@@ -1982,7 +1983,7 @@ void HELPER(ipte)(CPUS390XState *env, uint64_t pto, uint64_t vaddr,
             tlb_flush(cs);
         }
     } else {
-        if (vaddr & ~VADDR_PX) {
+        if (vaddr & ~VADDR_PAGE_TX_MASK) {
             tlb_flush_page_all_cpus_synced(cs, page);
             /* XXX 31-bit hack */
             tlb_flush_page_all_cpus_synced(cs, page ^ 0x80000000);
target/s390x/mmu_helper.c +165 -195

444 lines not on this page · raw message

Signature · 1 line
2.21.0
#12 lore raw

Re: [Qemu-devel] [PATCH-for-4.2 v1 3/9] s390x/mmu: DAT translation rewrite

Quoted 97 lines · David Hildenbrand

Let's rewrite the DAT translation in a non-recursive way, similar to arch/s390/kvm/gaccess.c:guest_translate() in KVM. This makes the code much easier to read, compare and maintain.

Use better names for the region/section/page table entries and for the macros to extract relevant parts from virtual address. Introduce defines for all defined bits, this will come in handy soon.

All access exceptions now directly go via trigger_access_exception(), at a central point. DAT protection checks are performed at a central place.

Also, we now catch and indicate invalid addresses of page tables. All table entries are accessed via read_table_entry().

---
 target/s390x/cpu.h        |  77 +++++---
 target/s390x/mem_helper.c |  13 +-
 target/s390x/mmu_helper.c | 360 +++++++++++++++++---------------------
 3 files changed, 229 insertions(+), 221 deletions(-)
target/s390x/cpu.h +47 -20
index c34992bb2e..1ff14250bd 100644
@@ -554,26 +554,63 @@ QEMU_BUILD_BUG_ON(sizeof(SysIB) != 4096);
 #define ASCE_TYPE_SEGMENT     0x00        /* segment table type               */
 #define ASCE_TABLE_LENGTH     0x03        /* region table length              */
 
-#define REGION_ENTRY_ORIGIN   (~0xfffULL) /* region/segment table origin    */
-#define REGION_ENTRY_RO       0x200       /* region/segment protection bit  */
-#define REGION_ENTRY_TF       0xc0        /* region/segment table offset    */
-#define REGION_ENTRY_INV      0x20        /* invalid region table entry     */
-#define REGION_ENTRY_TYPE_MASK 0x0c       /* region/segment table type mask */
-#define REGION_ENTRY_TYPE_R1  0x0c        /* region first table type        */
-#define REGION_ENTRY_TYPE_R2  0x08        /* region second table type       */
-#define REGION_ENTRY_TYPE_R3  0x04        /* region third table type        */
-#define REGION_ENTRY_LENGTH   0x03        /* region third length            */
-
-#define SEGMENT_ENTRY_ORIGIN  (~0x7ffULL) /* segment table origin        */
-#define SEGMENT_ENTRY_FC      0x400       /* format control              */
-#define SEGMENT_ENTRY_RO      0x200       /* page protection bit         */
-#define SEGMENT_ENTRY_INV     0x20        /* invalid segment table entry */
-
-#define VADDR_PX              0xff000     /* page index bits   */
-
-#define PAGE_RO               0x200       /* HW read-only bit  */
-#define PAGE_INVALID          0x400       /* HW invalid bit    */
-#define PAGE_RES0             0x800       /* bit must be zero  */
+#define REGION_ENTRY_ORIGIN         0xfffffffffffff000ULL
+#define REGION_ENTRY_P              0x0000000000000200ULL
+#define REGION_ENTRY_TF             0x00000000000000c0ULL
+#define REGION_ENTRY_I              0x0000000000000020ULL
+#define REGION_ENTRY_TT             0x000000000000000cULL
+#define REGION_ENTRY_TL             0x0000000000000003ULL
+
+#define REGION_ENTRY_TT_REGION1     0x000000000000000cULL
+#define REGION_ENTRY_TT_REGION2     0x0000000000000008ULL
+#define REGION_ENTRY_TT_REGION3     0x0000000000000004ULL
+
+#define REGION3_ENTRY_RFAA          0xffffffff80000000ULL
+#define REGION3_ENTRY_AV            0x0000000000010000ULL
+#define REGION3_ENTRY_ACC           0x000000000000f000ULL
+#define REGION3_ENTRY_F             0x0000000000000800ULL
+#define REGION3_ENTRY_FC            0x0000000000000400ULL
+#define REGION3_ENTRY_IEP           0x0000000000000100ULL
+#define REGION3_ENTRY_CR            0x0000000000000010ULL
+
+#define SEGMENT_ENTRY_ORIGIN        0xfffffffffffff800ULL
+#define SEGMENT_ENTRY_SFAA          0xfffffffffff80000ULL
+#define SEGMENT_ENTRY_AV            0x0000000000010000ULL
+#define SEGMENT_ENTRY_ACC           0x000000000000f000ULL
+#define SEGMENT_ENTRY_F             0x0000000000000800ULL
+#define SEGMENT_ENTRY_FC            0x0000000000000400ULL
+#define SEGMENT_ENTRY_P             0x0000000000000200ULL
+#define SEGMENT_ENTRY_IEP           0x0000000000000100ULL
+#define SEGMENT_ENTRY_I             0x0000000000000020ULL
+#define SEGMENT_ENTRY_CS            0x0000000000000010ULL
+#define SEGMENT_ENTRY_TT            0x000000000000000cULL
+
+#define SEGMENT_ENTRY_TT_REGION1    0x000000000000000cULL
+#define SEGMENT_ENTRY_TT_REGION2    0x0000000000000008ULL
+#define SEGMENT_ENTRY_TT_REGION3    0x0000000000000004ULL
+#define SEGMENT_ENTRY_TT_SEGMENT    0x0000000000000000ULL
+
+#define PAGE_ENTRY_0                0x0000000000000800ULL
+#define PAGE_ENTRY_I                0x0000000000000400ULL
+#define PAGE_ENTRY_P                0x0000000000000200ULL
+#define PAGE_ENTRY_IEP              0x0000000000000100ULL
+
+#define VADDR_REGION1_TX_MASK       0xffe0000000000000ULL
+#define VADDR_REGION2_TX_MASK       0x001ffc0000000000ULL
+#define VADDR_REGION3_TX_MASK       0x000003ff80000000ULL
+#define VADDR_SEGMENT_TX_MASK       0x000000007ff00000ULL
+#define VADDR_PAGE_TX_MASK          0x00000000000ff000ULL
+

target/s390x/cpu.h QEMU_BUILD_BUG_ON(sizeof(SysIB) != 4096); · line 613

Quoted 10 lines
target/s390x/cpu.h +10 -0
+#define VADDR_REGION1_TX(vaddr)     (((vaddr) & VADDR_REGION1_TX_MASK) >> 53)
+#define VADDR_REGION2_TX(vaddr)     (((vaddr) & VADDR_REGION2_TX_MASK) >> 42)
+#define VADDR_REGION3_TX(vaddr)     (((vaddr) & VADDR_REGION3_TX_MASK) >> 31)
+#define VADDR_SEGMENT_TX(vaddr)     (((vaddr) & VADDR_SEGMENT_TX_MASK) >> 20)
+#define VADDR_PAGE_TX(vaddr)        (((vaddr) & VADDR_PAGE_TX_MASK) >> 12)
+
+#define VADDR_REGION1_TL(vaddr)     (((vaddr) & 0xc000000000000000ULL) >> 62)
+#define VADDR_REGION2_TL(vaddr)     (((vaddr) & 0x0018000000000000ULL) >> 51)
+#define VADDR_REGION3_TL(vaddr)     (((vaddr) & 0x0000030000000000ULL) >> 40)
+#define VADDR_SEGMENT_TL(vaddr)     (((vaddr) & 0x0000000060000000ULL) >> 29)

Ugh, this patch is quite big, and you're doing multiple things at once here, e.g. renaming macros from PAGE_INVALID to PAGE_ENTRY_I ... could you maybe split this up in multiple patches instead? Also, is this complete rewrite really necessary, just to match your personal taste? I think it would be easier to review if you'd just fix the current code instead if necessary...

Thomas

#13 lore raw

Re: [Qemu-devel] [PATCH-for-4.2 v1 3/9] s390x/mmu: DAT translation rewrite

Quoted 103 lines · Thomas Huth
Quoted 102 lines · David Hildenbrand

Let's rewrite the DAT translation in a non-recursive way, similar to arch/s390/kvm/gaccess.c:guest_translate() in KVM. This makes the code much easier to read, compare and maintain.

Use better names for the region/section/page table entries and for the macros to extract relevant parts from virtual address. Introduce defines for all defined bits, this will come in handy soon.

All access exceptions now directly go via trigger_access_exception(), at a central point. DAT protection checks are performed at a central place.

Also, we now catch and indicate invalid addresses of page tables. All table entries are accessed via read_table_entry().

---
 target/s390x/cpu.h        |  77 +++++---
 target/s390x/mem_helper.c |  13 +-
 target/s390x/mmu_helper.c | 360 +++++++++++++++++---------------------
 3 files changed, 229 insertions(+), 221 deletions(-)
target/s390x/cpu.h +52 -20
index c34992bb2e..1ff14250bd 100644
@@ -554,26 +554,63 @@ QEMU_BUILD_BUG_ON(sizeof(SysIB) != 4096);
 #define ASCE_TYPE_SEGMENT     0x00        /* segment table type               */
 #define ASCE_TABLE_LENGTH     0x03        /* region table length              */
 
-#define REGION_ENTRY_ORIGIN   (~0xfffULL) /* region/segment table origin    */
-#define REGION_ENTRY_RO       0x200       /* region/segment protection bit  */
-#define REGION_ENTRY_TF       0xc0        /* region/segment table offset    */
-#define REGION_ENTRY_INV      0x20        /* invalid region table entry     */
-#define REGION_ENTRY_TYPE_MASK 0x0c       /* region/segment table type mask */
-#define REGION_ENTRY_TYPE_R1  0x0c        /* region first table type        */
-#define REGION_ENTRY_TYPE_R2  0x08        /* region second table type       */
-#define REGION_ENTRY_TYPE_R3  0x04        /* region third table type        */
-#define REGION_ENTRY_LENGTH   0x03        /* region third length            */
-
-#define SEGMENT_ENTRY_ORIGIN  (~0x7ffULL) /* segment table origin        */
-#define SEGMENT_ENTRY_FC      0x400       /* format control              */
-#define SEGMENT_ENTRY_RO      0x200       /* page protection bit         */
-#define SEGMENT_ENTRY_INV     0x20        /* invalid segment table entry */
-
-#define VADDR_PX              0xff000     /* page index bits   */
-
-#define PAGE_RO               0x200       /* HW read-only bit  */
-#define PAGE_INVALID          0x400       /* HW invalid bit    */
-#define PAGE_RES0             0x800       /* bit must be zero  */
+#define REGION_ENTRY_ORIGIN         0xfffffffffffff000ULL
+#define REGION_ENTRY_P              0x0000000000000200ULL
+#define REGION_ENTRY_TF             0x00000000000000c0ULL
+#define REGION_ENTRY_I              0x0000000000000020ULL
+#define REGION_ENTRY_TT             0x000000000000000cULL
+#define REGION_ENTRY_TL             0x0000000000000003ULL
+
+#define REGION_ENTRY_TT_REGION1     0x000000000000000cULL
+#define REGION_ENTRY_TT_REGION2     0x0000000000000008ULL
+#define REGION_ENTRY_TT_REGION3     0x0000000000000004ULL
+
+#define REGION3_ENTRY_RFAA          0xffffffff80000000ULL
+#define REGION3_ENTRY_AV            0x0000000000010000ULL
+#define REGION3_ENTRY_ACC           0x000000000000f000ULL
+#define REGION3_ENTRY_F             0x0000000000000800ULL
+#define REGION3_ENTRY_FC            0x0000000000000400ULL
+#define REGION3_ENTRY_IEP           0x0000000000000100ULL
+#define REGION3_ENTRY_CR            0x0000000000000010ULL
+
+#define SEGMENT_ENTRY_ORIGIN        0xfffffffffffff800ULL
+#define SEGMENT_ENTRY_SFAA          0xfffffffffff80000ULL
+#define SEGMENT_ENTRY_AV            0x0000000000010000ULL
+#define SEGMENT_ENTRY_ACC           0x000000000000f000ULL
+#define SEGMENT_ENTRY_F             0x0000000000000800ULL
+#define SEGMENT_ENTRY_FC            0x0000000000000400ULL
+#define SEGMENT_ENTRY_P             0x0000000000000200ULL
+#define SEGMENT_ENTRY_IEP           0x0000000000000100ULL
+#define SEGMENT_ENTRY_I             0x0000000000000020ULL
+#define SEGMENT_ENTRY_CS            0x0000000000000010ULL
+#define SEGMENT_ENTRY_TT            0x000000000000000cULL
+
+#define SEGMENT_ENTRY_TT_REGION1    0x000000000000000cULL
+#define SEGMENT_ENTRY_TT_REGION2    0x0000000000000008ULL
+#define SEGMENT_ENTRY_TT_REGION3    0x0000000000000004ULL
+#define SEGMENT_ENTRY_TT_SEGMENT    0x0000000000000000ULL
+
+#define PAGE_ENTRY_0                0x0000000000000800ULL
+#define PAGE_ENTRY_I                0x0000000000000400ULL
+#define PAGE_ENTRY_P                0x0000000000000200ULL
+#define PAGE_ENTRY_IEP              0x0000000000000100ULL
+
+#define VADDR_REGION1_TX_MASK       0xffe0000000000000ULL
+#define VADDR_REGION2_TX_MASK       0x001ffc0000000000ULL
+#define VADDR_REGION3_TX_MASK       0x000003ff80000000ULL
+#define VADDR_SEGMENT_TX_MASK       0x000000007ff00000ULL
+#define VADDR_PAGE_TX_MASK          0x00000000000ff000ULL
+
+#define VADDR_REGION1_TX(vaddr)     (((vaddr) & VADDR_REGION1_TX_MASK) >> 53)
+#define VADDR_REGION2_TX(vaddr)     (((vaddr) & VADDR_REGION2_TX_MASK) >> 42)
+#define VADDR_REGION3_TX(vaddr)     (((vaddr) & VADDR_REGION3_TX_MASK) >> 31)
+#define VADDR_SEGMENT_TX(vaddr)     (((vaddr) & VADDR_SEGMENT_TX_MASK) >> 20)
+#define VADDR_PAGE_TX(vaddr)        (((vaddr) & VADDR_PAGE_TX_MASK) >> 12)
Quoted 8 lines

target/s390x/cpu.h QEMU_BUILD_BUG_ON(sizeof(SysIB) != 4096); · line 613

Quoted 5 lines
target/s390x/cpu.h +5 -0
+
+#define VADDR_REGION1_TL(vaddr)     (((vaddr) & 0xc000000000000000ULL) >> 62)
+#define VADDR_REGION2_TL(vaddr)     (((vaddr) & 0x0018000000000000ULL) >> 51)
+#define VADDR_REGION3_TL(vaddr)     (((vaddr) & 0x0000030000000000ULL) >> 40)
+#define VADDR_SEGMENT_TL(vaddr)     (((vaddr) & 0x0000000060000000ULL) >> 29)

Ugh, this patch is quite big, and you're doing multiple things at once here, e.g. renaming macros from PAGE_INVALID to PAGE_ENTRY_I ... could

I could split out renaming the macros, however, besides a lot of work on my side this won't really make a huge difference here.

Quoted 2 lines

you maybe split this up in multiple patches instead? Also, is this complete rewrite really necessary, just to match your personal taste? I

I'm not gonna use lipstick on a pig ;) No honestly, the recursion is just nasty and we can now easily compare the current code with arch/s390/kvm/gaccess.c:guest_translate()

Quoted 2 lines

think it would be easier to review if you'd just fix the current code instead if necessary...

No, won't do that.

Still thanks for having a look.

Signature · 3 lines
Thanks,

David / dhildenb
#14 lore raw

Re: [Qemu-devel] [PATCH-for-4.2 v1 3/9] s390x/mmu: DAT translation rewrite

Quoted 113 lines · David Hildenbrand
Quoted 103 lines · Thomas Huth
Quoted 102 lines · David Hildenbrand

Let's rewrite the DAT translation in a non-recursive way, similar to arch/s390/kvm/gaccess.c:guest_translate() in KVM. This makes the code much easier to read, compare and maintain.

Use better names for the region/section/page table entries and for the macros to extract relevant parts from virtual address. Introduce defines for all defined bits, this will come in handy soon.

All access exceptions now directly go via trigger_access_exception(), at a central point. DAT protection checks are performed at a central place.

Also, we now catch and indicate invalid addresses of page tables. All table entries are accessed via read_table_entry().

---
 target/s390x/cpu.h        |  77 +++++---
 target/s390x/mem_helper.c |  13 +-
 target/s390x/mmu_helper.c | 360 +++++++++++++++++---------------------
 3 files changed, 229 insertions(+), 221 deletions(-)
target/s390x/cpu.h +52 -20
index c34992bb2e..1ff14250bd 100644
@@ -554,26 +554,63 @@ QEMU_BUILD_BUG_ON(sizeof(SysIB) != 4096);
 #define ASCE_TYPE_SEGMENT     0x00        /* segment table type               */
 #define ASCE_TABLE_LENGTH     0x03        /* region table length              */
 
-#define REGION_ENTRY_ORIGIN   (~0xfffULL) /* region/segment table origin    */
-#define REGION_ENTRY_RO       0x200       /* region/segment protection bit  */
-#define REGION_ENTRY_TF       0xc0        /* region/segment table offset    */
-#define REGION_ENTRY_INV      0x20        /* invalid region table entry     */
-#define REGION_ENTRY_TYPE_MASK 0x0c       /* region/segment table type mask */
-#define REGION_ENTRY_TYPE_R1  0x0c        /* region first table type        */
-#define REGION_ENTRY_TYPE_R2  0x08        /* region second table type       */
-#define REGION_ENTRY_TYPE_R3  0x04        /* region third table type        */
-#define REGION_ENTRY_LENGTH   0x03        /* region third length            */
-
-#define SEGMENT_ENTRY_ORIGIN  (~0x7ffULL) /* segment table origin        */
-#define SEGMENT_ENTRY_FC      0x400       /* format control              */
-#define SEGMENT_ENTRY_RO      0x200       /* page protection bit         */
-#define SEGMENT_ENTRY_INV     0x20        /* invalid segment table entry */
-
-#define VADDR_PX              0xff000     /* page index bits   */
-
-#define PAGE_RO               0x200       /* HW read-only bit  */
-#define PAGE_INVALID          0x400       /* HW invalid bit    */
-#define PAGE_RES0             0x800       /* bit must be zero  */
+#define REGION_ENTRY_ORIGIN         0xfffffffffffff000ULL
+#define REGION_ENTRY_P              0x0000000000000200ULL
+#define REGION_ENTRY_TF             0x00000000000000c0ULL
+#define REGION_ENTRY_I              0x0000000000000020ULL
+#define REGION_ENTRY_TT             0x000000000000000cULL
+#define REGION_ENTRY_TL             0x0000000000000003ULL
+
+#define REGION_ENTRY_TT_REGION1     0x000000000000000cULL
+#define REGION_ENTRY_TT_REGION2     0x0000000000000008ULL
+#define REGION_ENTRY_TT_REGION3     0x0000000000000004ULL
+
+#define REGION3_ENTRY_RFAA          0xffffffff80000000ULL
+#define REGION3_ENTRY_AV            0x0000000000010000ULL
+#define REGION3_ENTRY_ACC           0x000000000000f000ULL
+#define REGION3_ENTRY_F             0x0000000000000800ULL
+#define REGION3_ENTRY_FC            0x0000000000000400ULL
+#define REGION3_ENTRY_IEP           0x0000000000000100ULL
+#define REGION3_ENTRY_CR            0x0000000000000010ULL
+
+#define SEGMENT_ENTRY_ORIGIN        0xfffffffffffff800ULL
+#define SEGMENT_ENTRY_SFAA          0xfffffffffff80000ULL
+#define SEGMENT_ENTRY_AV            0x0000000000010000ULL
+#define SEGMENT_ENTRY_ACC           0x000000000000f000ULL
+#define SEGMENT_ENTRY_F             0x0000000000000800ULL
+#define SEGMENT_ENTRY_FC            0x0000000000000400ULL
+#define SEGMENT_ENTRY_P             0x0000000000000200ULL
+#define SEGMENT_ENTRY_IEP           0x0000000000000100ULL
+#define SEGMENT_ENTRY_I             0x0000000000000020ULL
+#define SEGMENT_ENTRY_CS            0x0000000000000010ULL
+#define SEGMENT_ENTRY_TT            0x000000000000000cULL
+
+#define SEGMENT_ENTRY_TT_REGION1    0x000000000000000cULL
+#define SEGMENT_ENTRY_TT_REGION2    0x0000000000000008ULL
+#define SEGMENT_ENTRY_TT_REGION3    0x0000000000000004ULL
+#define SEGMENT_ENTRY_TT_SEGMENT    0x0000000000000000ULL
+
+#define PAGE_ENTRY_0                0x0000000000000800ULL
+#define PAGE_ENTRY_I                0x0000000000000400ULL
+#define PAGE_ENTRY_P                0x0000000000000200ULL
+#define PAGE_ENTRY_IEP              0x0000000000000100ULL
+
+#define VADDR_REGION1_TX_MASK       0xffe0000000000000ULL
+#define VADDR_REGION2_TX_MASK       0x001ffc0000000000ULL
+#define VADDR_REGION3_TX_MASK       0x000003ff80000000ULL
+#define VADDR_SEGMENT_TX_MASK       0x000000007ff00000ULL
+#define VADDR_PAGE_TX_MASK          0x00000000000ff000ULL
+
+#define VADDR_REGION1_TX(vaddr)     (((vaddr) & VADDR_REGION1_TX_MASK) >> 53)
+#define VADDR_REGION2_TX(vaddr)     (((vaddr) & VADDR_REGION2_TX_MASK) >> 42)
+#define VADDR_REGION3_TX(vaddr)     (((vaddr) & VADDR_REGION3_TX_MASK) >> 31)
+#define VADDR_SEGMENT_TX(vaddr)     (((vaddr) & VADDR_SEGMENT_TX_MASK) >> 20)
+#define VADDR_PAGE_TX(vaddr)        (((vaddr) & VADDR_PAGE_TX_MASK) >> 12)
Quoted 8 lines

target/s390x/cpu.h QEMU_BUILD_BUG_ON(sizeof(SysIB) != 4096); · line 613

Quoted 5 lines
target/s390x/cpu.h +5 -0
+
+#define VADDR_REGION1_TL(vaddr)     (((vaddr) & 0xc000000000000000ULL) >> 62)
+#define VADDR_REGION2_TL(vaddr)     (((vaddr) & 0x0018000000000000ULL) >> 51)
+#define VADDR_REGION3_TL(vaddr)     (((vaddr) & 0x0000030000000000ULL) >> 40)
+#define VADDR_SEGMENT_TL(vaddr)     (((vaddr) & 0x0000000060000000ULL) >> 29)

Ugh, this patch is quite big, and you're doing multiple things at once here, e.g. renaming macros from PAGE_INVALID to PAGE_ENTRY_I ... could

Quoted 2 lines

I could split out renaming the macros, however, besides a lot of work on my side this won't really make a huge difference here.

FWIW, I can try to perform some changes on the old code and then perform the switch from recursion->single function in one step. Will try to see how that turns out.

Signature · 3 lines
Thanks,

David / dhildenb
#15 lore raw

Re: [Qemu-devel] [qemu-s390x] [PATCH-for-4.2 v1 3/9] s390x/mmu: DAT translation rewrite

In reply to David Hildenbrand
Quoted 3 lines · David Hildenbrand

Let's rewrite the DAT translation in a non-recursive way, similar to arch/s390/kvm/gaccess.c:guest_translate() in KVM. This makes the code much easier to read, compare and maintain.

Ok, I just had another look at this patch, and even if I don't like the complete rewrite just for the sake of it, the new code looks ok to me.

[...]

Quoted 48 lines
target/s390x/mmu_helper.c +48 -0
+    switch (asce & ASCE_TYPE_MASK) {
+    case ASCE_TYPE_REGION1:
+        if (read_table_entry(gaddr, &entry)) {
+            return PGM_ADDRESSING;
+        }
+        if (entry & REGION_ENTRY_I) {
+            return PGM_REG_FIRST_TRANS;
+        }
+        if ((entry & REGION_ENTRY_TT) != REGION_ENTRY_TT_REGION1) {
+            return PGM_TRANS_SPEC;
+        }
+        if (VADDR_REGION2_TL(vaddr) < (entry & REGION_ENTRY_TF) >> 6 ||
+            VADDR_REGION2_TL(vaddr) > (entry & REGION_ENTRY_TL)) {
+            return PGM_REG_SEC_TRANS;
+        }
+        if (edat1 && (entry & REGION_ENTRY_P)) {
+            *flags &= ~PAGE_WRITE;
+        }
+        gaddr = (entry & REGION_ENTRY_ORIGIN) + VADDR_REGION2_TX(vaddr) * 8;
+        /* FALL THROUGH */
+    case ASCE_TYPE_REGION2:
+        if (read_table_entry(gaddr, &entry)) {
+            return PGM_ADDRESSING;
+        }
+        if (entry & REGION_ENTRY_I) {
+            return PGM_REG_SEC_TRANS;
+        }
+        if ((entry & REGION_ENTRY_TT) != REGION_ENTRY_TT_REGION2) {
+            return PGM_TRANS_SPEC;
+        }
+        if (VADDR_REGION3_TL(vaddr) < (entry & REGION_ENTRY_TF) >> 6 ||
+            VADDR_REGION3_TL(vaddr) > (entry & REGION_ENTRY_TL)) {
+            return PGM_REG_THIRD_TRANS;
+        }
+        if (edat1 && (entry & REGION_ENTRY_P)) {
+            *flags &= ~PAGE_WRITE;
+        }
+        gaddr = (entry & REGION_ENTRY_ORIGIN) + VADDR_REGION3_TX(vaddr) * 8;
+        /* FALL THROUGH */
+    case ASCE_TYPE_REGION3:
+        if (read_table_entry(gaddr, &entry)) {
+            return PGM_ADDRESSING;
+        }
+        if (entry & REGION_ENTRY_I) {
+            return PGM_REG_THIRD_TRANS;
+        }
+        if ((entry & REGION_ENTRY_TT) != REGION_ENTRY_TT_REGION3) {
+            return PGM_TRANS_SPEC;

target/s390x/mmu_helper.c target_ulong mmu_real2abs(CPUS390XState *env, target_ulong raddr) · line 245

Quoted 10 lines
target/s390x/mmu_helper.c +10 -0
+        }
+        if (edat1 && (entry & REGION_ENTRY_P)) {
+            *flags &= ~PAGE_WRITE;
+        }
+        if (VADDR_SEGMENT_TL(vaddr) < (entry & REGION_ENTRY_TF) >> 6 ||
+            VADDR_SEGMENT_TL(vaddr) > (entry & REGION_ENTRY_TL)) {
+            return PGM_SEGMENT_TRANS;
+        }
+        gaddr = (entry & REGION_ENTRY_ORIGIN) + VADDR_SEGMENT_TX(vaddr) * 8;
+        /* FALL THROUGH */

If you don't like recursion, maybe you could at least use a for-loop for the region tables? ... the code is really quite repetitive here... just my 0.02 €.

Thomas

#16 lore raw

Re: [Qemu-devel] [qemu-s390x] [PATCH-for-4.2 v1 3/9] s390x/mmu: DAT translation rewrite

Quoted 68 lines · Thomas Huth
Quoted 3 lines · David Hildenbrand

Let's rewrite the DAT translation in a non-recursive way, similar to arch/s390/kvm/gaccess.c:guest_translate() in KVM. This makes the code much easier to read, compare and maintain.

Ok, I just had another look at this patch, and even if I don't like the complete rewrite just for the sake of it, the new code looks ok to me.

[...]

Quoted 48 lines
target/s390x/mmu_helper.c +48 -0
+    switch (asce & ASCE_TYPE_MASK) {
+    case ASCE_TYPE_REGION1:
+        if (read_table_entry(gaddr, &entry)) {
+            return PGM_ADDRESSING;
+        }
+        if (entry & REGION_ENTRY_I) {
+            return PGM_REG_FIRST_TRANS;
+        }
+        if ((entry & REGION_ENTRY_TT) != REGION_ENTRY_TT_REGION1) {
+            return PGM_TRANS_SPEC;
+        }
+        if (VADDR_REGION2_TL(vaddr) < (entry & REGION_ENTRY_TF) >> 6 ||
+            VADDR_REGION2_TL(vaddr) > (entry & REGION_ENTRY_TL)) {
+            return PGM_REG_SEC_TRANS;
+        }
+        if (edat1 && (entry & REGION_ENTRY_P)) {
+            *flags &= ~PAGE_WRITE;
+        }
+        gaddr = (entry & REGION_ENTRY_ORIGIN) + VADDR_REGION2_TX(vaddr) * 8;
+        /* FALL THROUGH */
+    case ASCE_TYPE_REGION2:
+        if (read_table_entry(gaddr, &entry)) {
+            return PGM_ADDRESSING;
+        }
+        if (entry & REGION_ENTRY_I) {
+            return PGM_REG_SEC_TRANS;
+        }
+        if ((entry & REGION_ENTRY_TT) != REGION_ENTRY_TT_REGION2) {
+            return PGM_TRANS_SPEC;
+        }
+        if (VADDR_REGION3_TL(vaddr) < (entry & REGION_ENTRY_TF) >> 6 ||
+            VADDR_REGION3_TL(vaddr) > (entry & REGION_ENTRY_TL)) {
+            return PGM_REG_THIRD_TRANS;
+        }
+        if (edat1 && (entry & REGION_ENTRY_P)) {
+            *flags &= ~PAGE_WRITE;
+        }
+        gaddr = (entry & REGION_ENTRY_ORIGIN) + VADDR_REGION3_TX(vaddr) * 8;
+        /* FALL THROUGH */
+    case ASCE_TYPE_REGION3:
+        if (read_table_entry(gaddr, &entry)) {
+            return PGM_ADDRESSING;
+        }
+        if (entry & REGION_ENTRY_I) {
+            return PGM_REG_THIRD_TRANS;
+        }
+        if ((entry & REGION_ENTRY_TT) != REGION_ENTRY_TT_REGION3) {
+            return PGM_TRANS_SPEC;

target/s390x/mmu_helper.c target_ulong mmu_real2abs(CPUS390XState *env, target_ulong raddr) · line 245

Quoted 10 lines
target/s390x/mmu_helper.c +10 -0
+        }
+        if (edat1 && (entry & REGION_ENTRY_P)) {
+            *flags &= ~PAGE_WRITE;
+        }
+        if (VADDR_SEGMENT_TL(vaddr) < (entry & REGION_ENTRY_TF) >> 6 ||
+            VADDR_SEGMENT_TL(vaddr) > (entry & REGION_ENTRY_TL)) {
+            return PGM_SEGMENT_TRANS;
+        }
+        gaddr = (entry & REGION_ENTRY_ORIGIN) + VADDR_SEGMENT_TX(vaddr) * 8;
+        /* FALL THROUGH */
Quoted 3 lines

If you don't like recursion, maybe you could at least use a for-loop for the region tables? ... the code is really quite repetitive here... just my 0.02 €.

I'll split this patch further up once I have time. With the unrolling I am not yet quite sure - the tables tend to get more different with every new HW release (especially, see the other patches in this series, like edat2 and IEP) and we want our branch predictor to produce sane predictions (especially when processing consecutive pages).

Quoted 3 lines

Thomas

Signature · 3 lines
Thanks,

David / dhildenb
#17 lore raw

Re: [Qemu-devel] [qemu-s390x] [PATCH-for-4.2 v1 3/9] s390x/mmu: DAT translation rewrite

Quoted 73 lines · David Hildenbrand
Quoted 68 lines · Thomas Huth
Quoted 3 lines · David Hildenbrand

Let's rewrite the DAT translation in a non-recursive way, similar to arch/s390/kvm/gaccess.c:guest_translate() in KVM. This makes the code much easier to read, compare and maintain.

Ok, I just had another look at this patch, and even if I don't like the complete rewrite just for the sake of it, the new code looks ok to me.

[...]

Quoted 48 lines
target/s390x/mmu_helper.c +48 -0
+    switch (asce & ASCE_TYPE_MASK) {
+    case ASCE_TYPE_REGION1:
+        if (read_table_entry(gaddr, &entry)) {
+            return PGM_ADDRESSING;
+        }
+        if (entry & REGION_ENTRY_I) {
+            return PGM_REG_FIRST_TRANS;
+        }
+        if ((entry & REGION_ENTRY_TT) != REGION_ENTRY_TT_REGION1) {
+            return PGM_TRANS_SPEC;
+        }
+        if (VADDR_REGION2_TL(vaddr) < (entry & REGION_ENTRY_TF) >> 6 ||
+            VADDR_REGION2_TL(vaddr) > (entry & REGION_ENTRY_TL)) {
+            return PGM_REG_SEC_TRANS;
+        }
+        if (edat1 && (entry & REGION_ENTRY_P)) {
+            *flags &= ~PAGE_WRITE;
+        }
+        gaddr = (entry & REGION_ENTRY_ORIGIN) + VADDR_REGION2_TX(vaddr) * 8;
+        /* FALL THROUGH */
+    case ASCE_TYPE_REGION2:
+        if (read_table_entry(gaddr, &entry)) {
+            return PGM_ADDRESSING;
+        }
+        if (entry & REGION_ENTRY_I) {
+            return PGM_REG_SEC_TRANS;
+        }
+        if ((entry & REGION_ENTRY_TT) != REGION_ENTRY_TT_REGION2) {
+            return PGM_TRANS_SPEC;
+        }
+        if (VADDR_REGION3_TL(vaddr) < (entry & REGION_ENTRY_TF) >> 6 ||
+            VADDR_REGION3_TL(vaddr) > (entry & REGION_ENTRY_TL)) {
+            return PGM_REG_THIRD_TRANS;
+        }
+        if (edat1 && (entry & REGION_ENTRY_P)) {
+            *flags &= ~PAGE_WRITE;
+        }
+        gaddr = (entry & REGION_ENTRY_ORIGIN) + VADDR_REGION3_TX(vaddr) * 8;
+        /* FALL THROUGH */
+    case ASCE_TYPE_REGION3:
+        if (read_table_entry(gaddr, &entry)) {
+            return PGM_ADDRESSING;
+        }
+        if (entry & REGION_ENTRY_I) {
+            return PGM_REG_THIRD_TRANS;
+        }
+        if ((entry & REGION_ENTRY_TT) != REGION_ENTRY_TT_REGION3) {
+            return PGM_TRANS_SPEC;

target/s390x/mmu_helper.c target_ulong mmu_real2abs(CPUS390XState *env, target_ulong raddr) · line 245

Quoted 10 lines
target/s390x/mmu_helper.c +10 -0
+        }
+        if (edat1 && (entry & REGION_ENTRY_P)) {
+            *flags &= ~PAGE_WRITE;
+        }
+        if (VADDR_SEGMENT_TL(vaddr) < (entry & REGION_ENTRY_TF) >> 6 ||
+            VADDR_SEGMENT_TL(vaddr) > (entry & REGION_ENTRY_TL)) {
+            return PGM_SEGMENT_TRANS;
+        }
+        gaddr = (entry & REGION_ENTRY_ORIGIN) + VADDR_SEGMENT_TX(vaddr) * 8;
+        /* FALL THROUGH */
Quoted 3 lines

If you don't like recursion, maybe you could at least use a for-loop for the region tables? ... the code is really quite repetitive here... just my 0.02 €.

Quoted 5 lines

I'll split this patch further up once I have time. With the unrolling I am not yet quite sure - the tables tend to get more different with every new HW release (especially, see the other patches in this series, like edat2 and IEP) and we want our branch predictor to produce sane predictions (especially when processing consecutive pages).

Ok, I just also saw in the next patch that region 3 already needs some special handling for EDAT-2, so never mind, it's likely best to keep it unrolled.

Thomas

#18 lore raw

PATCH 4/9 s390x/mmu: Add EDAT2 translation support

In reply to David Hildenbrand

This only adds basic support to the DAT translation, but no EDAT2 support for TCG. E.g., the gdbstub under kvm uses this function, too, to translate virtual addresses.

---
 target/s390x/mmu_helper.c | 8 ++++++++
 1 file changed, 8 insertions(+)
target/s390x/mmu_helper.c +8 -0
index de7798284d..5c9c7d385d 100644
@@ -139,6 +139,7 @@ static int mmu_translate_asce(CPUS390XState *env, target_ulong vaddr,
 {
     const bool edat1 = (env->cregs[0] & CR0_EDAT) &&
                        s390_has_feat(S390_FEAT_EDAT);
+    const bool edat2 = edat1 && s390_has_feat(S390_FEAT_EDAT_2);
     const int asce_tl = asce & ASCE_TABLE_LENGTH;
     const int asce_p = asce & ASCE_PRIVATE_SPACE;
     hwaddr gaddr = asce & ASCE_ORIGIN;
@@ -234,9 +235,16 @@ static int mmu_translate_asce(CPUS390XState *env, target_ulong vaddr,
         if ((entry & REGION_ENTRY_TT) != REGION_ENTRY_TT_REGION3) {
             return PGM_TRANS_SPEC;
         }
+        if (edat2 && (entry & REGION3_ENTRY_CR) && asce_p) {
+            return PGM_TRANS_SPEC;
+        }
         if (edat1 && (entry & REGION_ENTRY_P)) {
             *flags &= ~PAGE_WRITE;
         }
+        if (edat2 && (entry & REGION3_ENTRY_FC)) {
+            *raddr = entry & REGION3_ENTRY_RFAA;
+            return 0;
+        }
         if (VADDR_SEGMENT_TL(vaddr) < (entry & REGION_ENTRY_TF) >> 6 ||
             VADDR_SEGMENT_TL(vaddr) > (entry & REGION_ENTRY_TL)) {
             return PGM_SEGMENT_TRANS;
Signature · 1 line
2.21.0
Reviewed-by on v1 4/9
#19 lore raw

Re: [Qemu-devel] [qemu-s390x] [PATCH-for-4.2 v1 4/9] s390x/mmu: Add EDAT2 translation support

Quoted 28 lines · David Hildenbrand

This only adds basic support to the DAT translation, but no EDAT2 support for TCG. E.g., the gdbstub under kvm uses this function, too, to translate virtual addresses.

---
 target/s390x/mmu_helper.c | 8 ++++++++
 1 file changed, 8 insertions(+)
target/s390x/mmu_helper.c +4 -0
index de7798284d..5c9c7d385d 100644
@@ -139,6 +139,7 @@ static int mmu_translate_asce(CPUS390XState *env, target_ulong vaddr,
 {
     const bool edat1 = (env->cregs[0] & CR0_EDAT) &&
                        s390_has_feat(S390_FEAT_EDAT);
+    const bool edat2 = edat1 && s390_has_feat(S390_FEAT_EDAT_2);
     const int asce_tl = asce & ASCE_TABLE_LENGTH;
     const int asce_p = asce & ASCE_PRIVATE_SPACE;
     hwaddr gaddr = asce & ASCE_ORIGIN;
@@ -234,9 +235,16 @@ static int mmu_translate_asce(CPUS390XState *env, target_ulong vaddr,
         if ((entry & REGION_ENTRY_TT) != REGION_ENTRY_TT_REGION3) {
             return PGM_TRANS_SPEC;
         }
+        if (edat2 && (entry & REGION3_ENTRY_CR) && asce_p) {
+            return PGM_TRANS_SPEC;
+        }

target/s390x/mmu_helper.c static int mmu_translate_asce(CPUS390XState *env, target_ulong vaddr, · line 250

Quoted 10 lines
target/s390x/mmu_helper.c +4 -0
         if (edat1 && (entry & REGION_ENTRY_P)) {
             *flags &= ~PAGE_WRITE;
         }
+        if (edat2 && (entry & REGION3_ENTRY_FC)) {
+            *raddr = entry & REGION3_ENTRY_RFAA;
+            return 0;
+        }
         if (VADDR_SEGMENT_TL(vaddr) < (entry & REGION_ENTRY_TF) >> 6 ||
             VADDR_SEGMENT_TL(vaddr) > (entry & REGION_ENTRY_TL)) {
             return PGM_SEGMENT_TRANS;
#20 lore raw

PATCH 5/9 s390x/mmu: Implement access-exception-fetch/store-indication facility

In reply to David Hildenbrand

We always have to indicate whether it is a fetch or a store for all access exceptions. This is only missing for LAP exceptions.

---
 target/s390x/mmu_helper.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
target/s390x/mmu_helper.c +4 -2
index 5c9c7d385d..f3e988e4fd 100644
@@ -333,7 +333,7 @@ int mmu_translate(CPUS390XState *env, target_ulong vaddr, int rw, uint64_t asc,
         *flags |= PAGE_WRITE_INV;
         if (is_low_address(vaddr) && rw == MMU_DATA_STORE) {
             if (exc) {
-                trigger_access_exception(env, PGM_PROTECTION, ILEN_AUTO, 0);
+                trigger_access_exception(env, PGM_PROTECTION, ilen, tec);
             }
             return -EACCES;
         }
@@ -511,6 +511,8 @@ void s390_cpu_virt_mem_handle_exc(S390CPU *cpu, uintptr_t ra)
 int mmu_translate_real(CPUS390XState *env, target_ulong raddr, int rw,
                        target_ulong *addr, int *flags)
 {
+    uint64_t tec = (raddr & TARGET_PAGE_MASK) |
+                   (rw == MMU_DATA_STORE ? FS_WRITE : FS_READ);
     const bool lowprot_enabled = env->cregs[0] & CR0_LOWPROT;
 
     *flags = PAGE_READ | PAGE_WRITE | PAGE_EXEC;
@@ -518,7 +520,7 @@ int mmu_translate_real(CPUS390XState *env, target_ulong raddr, int rw,
         /* see comment in mmu_translate() how this works */
         *flags |= PAGE_WRITE_INV;
         if (is_low_address(raddr) && rw == MMU_DATA_STORE) {
-            trigger_access_exception(env, PGM_PROTECTION, ILEN_AUTO, 0);
+            trigger_access_exception(env, PGM_PROTECTION, ILEN_AUTO, tec);
             return -EACCES;
         }
     }
Signature · 1 line
2.21.0
#21 lore raw

Re: [Qemu-devel] [qemu-s390x] [PATCH-for-4.2 v1 5/9] s390x/mmu: Implement access-exception-fetch/store-indication facility

Quoted 2 lines · David Hildenbrand

We always have to indicate whether it is a fetch or a store for all access exceptions. This is only missing for LAP exceptions.

Do we really need this for LAP, too? If I get figure 3-5 "Enhanced Suppression-on-Protection Results" right, these bits are not set for LAP exceptions...? Do I miss something?

Thomas

#22 lore raw

Re: [Qemu-devel] [qemu-s390x] [PATCH-for-4.2 v1 5/9] s390x/mmu: Implement access-exception-fetch/store-indication facility

Quoted 7 lines · Thomas Huth
Quoted 2 lines · David Hildenbrand

We always have to indicate whether it is a fetch or a store for all access exceptions. This is only missing for LAP exceptions.

Do we really need this for LAP, too? If I get figure 3-5 "Enhanced Suppression-on-Protection Results" right, these bits are not set for LAP exceptions...? Do I miss something?

I was looking at an older version of the PoP ... the table that I mean is "Figure 3-8. Enhanced Suppression-on-Protection Facility 2 Results" in SA22-7832-11.

Thomas

#23 lore raw

Re: [Qemu-devel] [qemu-s390x] [PATCH-for-4.2 v1 5/9] s390x/mmu: Implement access-exception-fetch/store-indication facility

Quoted 9 lines · Thomas Huth
Quoted 7 lines · Thomas Huth
Quoted 2 lines · David Hildenbrand

We always have to indicate whether it is a fetch or a store for all access exceptions. This is only missing for LAP exceptions.

Do we really need this for LAP, too? If I get figure 3-5 "Enhanced Suppression-on-Protection Results" right, these bits are not set for LAP exceptions...? Do I miss something?

Quoted 6 lines

I was looking at an older version of the PoP ... the table that I mean is "Figure 3-8. Enhanced Suppression-on-Protection Facility 2 Results" in SA22-7832-11.

Thomas

I think that table only states that if 56==60==61==0, then we might have either KCP or LAP ("Presented if TEID details are not available" - but as we have TEID information available, we can just set 56=1 and 60=61=0 (== LAP), or am I missing something?

Signature · 3 lines
Thanks,

David / dhildenb
#24 lore raw

Re: [Qemu-devel] [qemu-s390x] [PATCH-for-4.2 v1 5/9] s390x/mmu: Implement access-exception-fetch/store-indication facility

Quoted 14 lines · David Hildenbrand
Quoted 13 lines · Thomas Huth
Quoted 7 lines · Thomas Huth
Quoted 2 lines · David Hildenbrand

We always have to indicate whether it is a fetch or a store for all access exceptions. This is only missing for LAP exceptions.

Do we really need this for LAP, too? If I get figure 3-5 "Enhanced Suppression-on-Protection Results" right, these bits are not set for LAP exceptions...? Do I miss something?

I was looking at an older version of the PoP ... the table that I mean is "Figure 3-8. Enhanced Suppression-on-Protection Facility 2 Results" in SA22-7832-11.

Quoted 7 lines
Quoted 2 lines

Thomas

I think that table only states that if 56==60==61==0, then we might have either KCP or LAP ("Presented if TEID details are not available" - but as we have TEID information available, we can just set 56=1 and 60=61=0 (== LAP), or am I missing something?

Oh, well, I was looking at the older version of the PoP first, and it was not specified there yet, and when I started looking the the new version, I only saw the first LAP line and stopped reading properly afterwards... of course you're right, there is another LAP line in the table where they say that the address is correclty specified.

Please mentioned the "Enhanced Suppression-on-Protection Facility 2" (which introduced this new behavior) in the patch description to make this clear, then your patch is fine.

Thomas

#25 lore raw

Re: [Qemu-devel] [qemu-s390x] [PATCH-for-4.2 v1 5/9] s390x/mmu: Implement access-exception-fetch/store-indication facility

Quoted 29 lines · Thomas Huth
Quoted 14 lines · David Hildenbrand
Quoted 13 lines · Thomas Huth
Quoted 7 lines · Thomas Huth
Quoted 2 lines · David Hildenbrand

We always have to indicate whether it is a fetch or a store for all access exceptions. This is only missing for LAP exceptions.

Do we really need this for LAP, too? If I get figure 3-5 "Enhanced Suppression-on-Protection Results" right, these bits are not set for LAP exceptions...? Do I miss something?

I was looking at an older version of the PoP ... the table that I mean is "Figure 3-8. Enhanced Suppression-on-Protection Facility 2 Results" in SA22-7832-11.

Quoted 7 lines
Quoted 2 lines

Thomas

I think that table only states that if 56==60==61==0, then we might have either KCP or LAP ("Presented if TEID details are not available" - but as we have TEID information available, we can just set 56=1 and 60=61=0 (== LAP), or am I missing something?

Oh, well, I was looking at the older version of the PoP first, and it was not specified there yet, and when I started looking the the new version, I only saw the first LAP line and stopped reading properly afterwards... of course you're right, there is another LAP line in the table where they say that the address is correclty specified.

Quoted 4 lines

Please mentioned the "Enhanced Suppression-on-Protection Facility 2" (which introduced this new behavior) in the patch description to make this clear, then your patch is fine.

Ah, right, that comes in the next patch. Might make sense to reshuffle both patches. Will have a look.

Thanks!

Quoted 2 lines

Thomas

Signature · 3 lines
Thanks,

David / dhildenb
#26 lore raw

PATCH 6/9 s390x/mmu: Implement enhanced suppression-on-protection facility 2

In reply to David Hildenbrand

We already implement ESOP-1. For ESOP-2, we only have to indicate all protection exceptions properly. Due to EDAT-1, we already indicate DAT exceptions properly. We don't trigger KCP/ALCP/IEP exceptions yet.

So all we have to do is set the TEID (TEC) to the right values (bit 56, 60, 61) in case of LAP.

We don't have any side-effects (e.g., no guarded-storage facility), therefore, bit 64 of the TEID (TEC) is always 0.

---
 target/s390x/mmu_helper.c | 4 ++++
 1 file changed, 4 insertions(+)
target/s390x/mmu_helper.c +4 -0
index f3e988e4fd..631cc29c28 100644
@@ -333,6 +333,8 @@ int mmu_translate(CPUS390XState *env, target_ulong vaddr, int rw, uint64_t asc,
         *flags |= PAGE_WRITE_INV;
         if (is_low_address(vaddr) && rw == MMU_DATA_STORE) {
             if (exc) {
+                /* LAP sets bit 56 */
+                tec |= 0x80;
                 trigger_access_exception(env, PGM_PROTECTION, ilen, tec);
             }
             return -EACCES;
@@ -520,6 +522,8 @@ int mmu_translate_real(CPUS390XState *env, target_ulong raddr, int rw,
         /* see comment in mmu_translate() how this works */
         *flags |= PAGE_WRITE_INV;
         if (is_low_address(raddr) && rw == MMU_DATA_STORE) {
+            /* LAP sets bit 56 */
+            tec |= 0x80;
             trigger_access_exception(env, PGM_PROTECTION, ILEN_AUTO, tec);
             return -EACCES;
         }
Signature · 1 line
2.21.0
#27 lore raw

Re: [Qemu-devel] [qemu-s390x] [PATCH-for-4.2 v1 6/9] s390x/mmu: Implement enhanced suppression-on-protection facility 2

Quoted 29 lines · David Hildenbrand

We already implement ESOP-1. For ESOP-2, we only have to indicate all protection exceptions properly. Due to EDAT-1, we already indicate DAT exceptions properly. We don't trigger KCP/ALCP/IEP exceptions yet.

So all we have to do is set the TEID (TEC) to the right values (bit 56, 60, 61) in case of LAP.

We don't have any side-effects (e.g., no guarded-storage facility), therefore, bit 64 of the TEID (TEC) is always 0.

---
 target/s390x/mmu_helper.c | 4 ++++
 1 file changed, 4 insertions(+)
target/s390x/mmu_helper.c +2 -0
index f3e988e4fd..631cc29c28 100644
@@ -333,6 +333,8 @@ int mmu_translate(CPUS390XState *env, target_ulong vaddr, int rw, uint64_t asc,
         *flags |= PAGE_WRITE_INV;
         if (is_low_address(vaddr) && rw == MMU_DATA_STORE) {
             if (exc) {
+                /* LAP sets bit 56 */
+                tec |= 0x80;
                 trigger_access_exception(env, PGM_PROTECTION, ilen, tec);
             }
             return -EACCES;

target/s390x/mmu_helper.c int mmu_translate_real(CPUS390XState *env, target_ulong raddr, int rw, · line 529

Quoted 8 lines
target/s390x/mmu_helper.c +2 -0
@@ -520,6 +522,8 @@ int mmu_translate_real(CPUS390XState *env, target_ulong raddr, int rw,
         /* see comment in mmu_translate() how this works */
         *flags |= PAGE_WRITE_INV;
         if (is_low_address(raddr) && rw == MMU_DATA_STORE) {
+            /* LAP sets bit 56 */
+            tec |= 0x80;
             trigger_access_exception(env, PGM_PROTECTION, ILEN_AUTO, tec);
             return -EACCES;
         }

I'd suggest to merge this with the previous patch since the other bits are only valid if bit 56 is enabled.

Thomas

#28 lore raw

PATCH 7/9 s390x/mmu: Implement Instruction-Execution-Protection Facility

In reply to David Hildenbrand

IEP support in the mmu is fairly easy. Set the right permissions for TLB entries and properly report an exception.

Make sure to handle EDAT-2 by setting bit 56/60/61 of the TEID (TEC) to the right values.

---
 target/s390x/cpu.h        |  1 +
 target/s390x/mmu_helper.c | 21 +++++++++++++++++++++
 2 files changed, 22 insertions(+)
target/s390x/cpu.h +1 -0
index 1ff14250bd..9a8318b3aa 100644
@@ -311,6 +311,7 @@ extern const struct VMStateDescription vmstate_s390_cpu;
 #define CR0_EDAT                0x0000000000800000ULL
 #define CR0_AFP                 0x0000000000040000ULL
 #define CR0_VECTOR              0x0000000000020000ULL
+#define CR0_IEP                 0x0000000000100000ULL
 #define CR0_EMERGENCY_SIGNAL_SC 0x0000000000004000ULL
 #define CR0_EXTERNAL_CALL_SC    0x0000000000002000ULL
 #define CR0_CKC_SC              0x0000000000000800ULL
target/s390x/mmu_helper.c +21 -0
index 631cc29c28..83e241c430 100644
@@ -140,6 +140,8 @@ static int mmu_translate_asce(CPUS390XState *env, target_ulong vaddr,
     const bool edat1 = (env->cregs[0] & CR0_EDAT) &&
                        s390_has_feat(S390_FEAT_EDAT);
     const bool edat2 = edat1 && s390_has_feat(S390_FEAT_EDAT_2);
+    const bool iep = (env->cregs[0] & CR0_IEP) &&
+                     s390_has_feat(S390_FEAT_INSTRUCTION_EXEC_PROT);
     const int asce_tl = asce & ASCE_TABLE_LENGTH;
     const int asce_p = asce & ASCE_PRIVATE_SPACE;
     hwaddr gaddr = asce & ASCE_ORIGIN;
@@ -242,6 +244,9 @@ static int mmu_translate_asce(CPUS390XState *env, target_ulong vaddr,
             *flags &= ~PAGE_WRITE;
         }
         if (edat2 && (entry & REGION3_ENTRY_FC)) {
+            if (iep && (entry & REGION3_ENTRY_IEP)) {
+                *flags &= ~PAGE_EXEC;
+            }
             *raddr = entry & REGION3_ENTRY_RFAA;
             return 0;
         }
@@ -268,6 +273,9 @@ static int mmu_translate_asce(CPUS390XState *env, target_ulong vaddr,
             *flags &= ~PAGE_WRITE;
         }
         if (edat1 && (entry & SEGMENT_ENTRY_FC)) {
+            if (iep && (entry & SEGMENT_ENTRY_IEP)) {
+                *flags &= ~PAGE_EXEC;
+            }
             *raddr = entry & SEGMENT_ENTRY_SFAA;
             return 0;
         }
@@ -287,6 +295,9 @@ static int mmu_translate_asce(CPUS390XState *env, target_ulong vaddr,
     if (entry & PAGE_ENTRY_P) {
         *flags &= ~PAGE_WRITE;
     }
+    if (iep && (entry & PAGE_ENTRY_IEP)) {
+        *flags &= ~PAGE_EXEC;
+    }
 
     *raddr = entry & TARGET_PAGE_MASK;
     return 0;
@@ -386,6 +397,16 @@ int mmu_translate(CPUS390XState *env, target_ulong vaddr, int rw, uint64_t asc,
         return -1;
     }
 
+    /* check for Instruction-Execution-Protection */
+    if (rw == MMU_INST_FETCH && !(*flags & PAGE_EXEC)) {
+        if (exc) {
+            /* IEP sets bit 56 and 61 */
+            tec |= 0x84;
+            trigger_access_exception(env, PGM_PROTECTION, ilen, tec);
+        }
+        return -1;
+    }
+
 nodat:
     /* Convert real address -> absolute address */
     *raddr = mmu_real2abs(env, *raddr);
Signature · 1 line
2.21.0
Reviewed-by on v1 7/9
#29 lore raw

Re: [Qemu-devel] [qemu-s390x] [PATCH-for-4.2 v1 7/9] s390x/mmu: Implement Instruction-Execution-Protection Facility

Quoted 11 lines · David Hildenbrand

IEP support in the mmu is fairly easy. Set the right permissions for TLB entries and properly report an exception.

Make sure to handle EDAT-2 by setting bit 56/60/61 of the TEID (TEC) to the right values.

---
 target/s390x/cpu.h        |  1 +
 target/s390x/mmu_helper.c | 21 +++++++++++++++++++++
 2 files changed, 22 insertions(+)

LGTM!

#30 lore raw

PATCH 8/9 s390x/cpumodel: Prepare for changes of QEMU model

In reply to David Hildenbrand

Setup the 4.1 compatibility model so we can add new features to the LATEST model.

---
 hw/s390x/s390-virtio-ccw.c  | 2 ++
 target/s390x/gen-features.c | 6 +++++-
 2 files changed, 7 insertions(+), 1 deletion(-)
hw/s390x/s390-virtio-ccw.c +2 -0
index 593b34e0e2..c815a65ee9 100644
@@ -671,7 +671,9 @@ DEFINE_CCW_MACHINE(4_2, "4.2", true);
 
 static void ccw_machine_4_1_instance_options(MachineState *machine)
 {
+    static const S390FeatInit qemu_cpu_feat = { S390_FEAT_LIST_QEMU_V4_1 };
     ccw_machine_4_2_instance_options(machine);
+    s390_set_qemu_cpu_model(0x2964, 13, 2, qemu_cpu_feat);
 }
 
 static void ccw_machine_4_1_class_options(MachineClass *mc)
target/s390x/gen-features.c +5 -1
index 49a650ac52..7e82f2f004 100644
@@ -698,11 +698,14 @@ static uint16_t qemu_V4_0[] = {
     S390_FEAT_ZPCI,
 };
 
-static uint16_t qemu_LATEST[] = {
+static uint16_t qemu_V4_1[] = {
     S390_FEAT_STFLE_53,
     S390_FEAT_VECTOR,
 };
 
+static uint16_t qemu_LATEST[] = {
+};
+
 /* add all new definitions before this point */
 static uint16_t qemu_MAX[] = {
     /* generates a dependency warning, leave it out for now */
@@ -824,6 +827,7 @@ static FeatGroupDefSpec QemuFeatDef[] = {
     QEMU_FEAT_INITIALIZER(V2_11),
     QEMU_FEAT_INITIALIZER(V3_1),
     QEMU_FEAT_INITIALIZER(V4_0),
+    QEMU_FEAT_INITIALIZER(V4_1),
     QEMU_FEAT_INITIALIZER(LATEST),
     QEMU_FEAT_INITIALIZER(MAX),
 };
Signature · 1 line
2.21.0
Reviewed-by on v1 8/9
#31 lore raw

Re: [Qemu-devel] [PATCH-for-4.2 v1 8/9] s390x/cpumodel: Prepare for changes of QEMU model

Quoted 2 lines · On Mon, 5 Aug 2019 17:29:46 +0200 David Hildenbrand <[email protected]> wrote:

Setup the 4.1 compatibility model so we can add new features to the LATEST model.

Basically a nop for now from an outside view.

Quoted 6 lines
---
 hw/s390x/s390-virtio-ccw.c  | 2 ++
 target/s390x/gen-features.c | 6 +++++-
 2 files changed, 7 insertions(+), 1 deletion(-)
Reviewed-by on v1 8/9
#32 lore raw

Re: [Qemu-devel] [qemu-s390x] [PATCH-for-4.2 v1 8/9] s390x/cpumodel: Prepare for changes of QEMU model

In reply to David Hildenbrand
Quoted 45 lines · David Hildenbrand

Setup the 4.1 compatibility model so we can add new features to the LATEST model.

---
 hw/s390x/s390-virtio-ccw.c  | 2 ++
 target/s390x/gen-features.c | 6 +++++-
 2 files changed, 7 insertions(+), 1 deletion(-)
hw/s390x/s390-virtio-ccw.c +2 -0
index 593b34e0e2..c815a65ee9 100644
@@ -671,7 +671,9 @@ DEFINE_CCW_MACHINE(4_2, "4.2", true);
 
 static void ccw_machine_4_1_instance_options(MachineState *machine)
 {
+    static const S390FeatInit qemu_cpu_feat = { S390_FEAT_LIST_QEMU_V4_1 };
     ccw_machine_4_2_instance_options(machine);
+    s390_set_qemu_cpu_model(0x2964, 13, 2, qemu_cpu_feat);
 }
 
 static void ccw_machine_4_1_class_options(MachineClass *mc)
target/s390x/gen-features.c +4 -1
index 49a650ac52..7e82f2f004 100644
@@ -698,11 +698,14 @@ static uint16_t qemu_V4_0[] = {
     S390_FEAT_ZPCI,
 };
 
-static uint16_t qemu_LATEST[] = {
+static uint16_t qemu_V4_1[] = {
     S390_FEAT_STFLE_53,
     S390_FEAT_VECTOR,
 };
 
+static uint16_t qemu_LATEST[] = {
+};
+
 /* add all new definitions before this point */
 static uint16_t qemu_MAX[] = {
     /* generates a dependency warning, leave it out for now */

target/s390x/gen-features.c static FeatGroupDefSpec QemuFeatDef[] = { · line 833

Quoted 7 lines
target/s390x/gen-features.c +1 -0
@@ -824,6 +827,7 @@ static FeatGroupDefSpec QemuFeatDef[] = {
     QEMU_FEAT_INITIALIZER(V2_11),
     QEMU_FEAT_INITIALIZER(V3_1),
     QEMU_FEAT_INITIALIZER(V4_0),
+    QEMU_FEAT_INITIALIZER(V4_1),
     QEMU_FEAT_INITIALIZER(LATEST),
     QEMU_FEAT_INITIALIZER(MAX),
 };
#33 lore raw

PATCH 9/9 s390x/cpumodel: Add new TCG features to QEMU cpu model

In reply to David Hildenbrand

We now implement a bunch of new facilities we can properly indicate.

ESOP-1/ESOP-2 handling is discussed in the PoP Chafter 3-15 ("Suppression on Protection"). The "Basic suppression-on-protection (SOP) facility" is a core part of z/Architecture without a facility indication. ESOP-2 is indicated by ESOP-1 + Side-effect facility ("ESOP-2"). Besides ESOP-2, the side-effect facility is only relevant for the guarded-storage facility (we don't implement).

S390_ESOP:
- We indicate DAT exeptions by setting bit 61 of the TEID (TEC) to 1 and bit 60 to zero. We don't trigger ALCP exceptions yet. Also, we set bit 0-51 and bit 62/63 to the right values.
S390_ACCESS_EXCEPTION_FS_INDICATION:
- The TEID (TEC) properly indicates in bit 52/53 on any access if it was a fetch or a store
S390_SIDE_EFFECT_ACCESS_ESOP2:
- We have no side-effect accesses (esp., we don't implement the guarded-storage faciliy), we correctly set bit 64 of the TEID (TEC) to 0 (no side-effect).
- ESOP2: We properly set bit 56, 60, 61 in the TEID (TEC) to indicate the type of protection. We don't trigger KCP/ALCP exceptions yet.
S390_INSTRUCTION_EXEC_PROT:
- The MMU properly detects and indicates the exception on instruction fetches
- Protected TLB entries will never get PAGE_EXEC set.

There is no need to fake the abscence of any of the facilities - without the facilities, some bits of the TEID (TEC) are simply unpredictable.

As IEP was added with z14 and we currently implement a z13, add it to the MAX model instead.

---
 target/s390x/gen-features.c | 4 ++++
 1 file changed, 4 insertions(+)
target/s390x/gen-features.c +4 -0
index 7e82f2f004..6e78d40d9a 100644
@@ -704,12 +704,16 @@ static uint16_t qemu_V4_1[] = {
 };
 
 static uint16_t qemu_LATEST[] = {
+    S390_FEAT_ACCESS_EXCEPTION_FS_INDICATION,
+    S390_FEAT_SIDE_EFFECT_ACCESS_ESOP2,
+    S390_FEAT_ESOP,
 };
 
 /* add all new definitions before this point */
 static uint16_t qemu_MAX[] = {
     /* generates a dependency warning, leave it out for now */
     S390_FEAT_MSA_EXT_5,
+    S390_FEAT_INSTRUCTION_EXEC_PROT,
 };
 
 /****** END FEATURE DEFS ******/
Signature · 1 line
2.21.0
#34 lore raw

Re: [Qemu-devel] [PATCH-for-4.2 v1 9/9] s390x/cpumodel: Add new TCG features to QEMU cpu model

Quoted 26 lines · On Mon, 5 Aug 2019 17:29:47 +0200 David Hildenbrand <[email protected]> wrote:

We now implement a bunch of new facilities we can properly indicate.

ESOP-1/ESOP-2 handling is discussed in the PoP Chafter 3-15 ("Suppression on Protection"). The "Basic suppression-on-protection (SOP) facility" is a core part of z/Architecture without a facility indication. ESOP-2 is indicated by ESOP-1 + Side-effect facility ("ESOP-2"). Besides ESOP-2, the side-effect facility is only relevant for the guarded-storage facility (we don't implement).

S390_ESOP:
- We indicate DAT exeptions by setting bit 61 of the TEID (TEC) to 1 and bit 60 to zero. We don't trigger ALCP exceptions yet. Also, we set bit 0-51 and bit 62/63 to the right values.
S390_ACCESS_EXCEPTION_FS_INDICATION:
- The TEID (TEC) properly indicates in bit 52/53 on any access if it was a fetch or a store
S390_SIDE_EFFECT_ACCESS_ESOP2:
- We have no side-effect accesses (esp., we don't implement the guarded-storage faciliy), we correctly set bit 64 of the TEID (TEC) to 0 (no side-effect).
- ESOP2: We properly set bit 56, 60, 61 in the TEID (TEC) to indicate the type of protection. We don't trigger KCP/ALCP exceptions yet.
S390_INSTRUCTION_EXEC_PROT:
- The MMU properly detects and indicates the exception on instruction fetches
- Protected TLB entries will never get PAGE_EXEC set.

Quoted 5 lines

There is no need to fake the abscence of any of the facilities - without the facilities, some bits of the TEID (TEC) are simply unpredictable.

As IEP was added with z14 and we currently implement a z13, add it to the MAX model instead.

Looks sane, once we get those features supported.

Quoted 14 lines
---
 target/s390x/gen-features.c | 4 ++++
 1 file changed, 4 insertions(+)
target/s390x/gen-features.c +0 -0
index 7e82f2f004..6e78d40d9a 100644
@@ -704,12 +704,16 @@ static uint16_t qemu_V4_1[] = {
 };
 
 static uint16_t qemu_LATEST[] = {

target/s390x/gen-features.c static uint16_t qemu_V4_1[] = { · line 716

Quoted 10 lines
target/s390x/gen-features.c +4 -0
+    S390_FEAT_ACCESS_EXCEPTION_FS_INDICATION,
+    S390_FEAT_SIDE_EFFECT_ACCESS_ESOP2,
+    S390_FEAT_ESOP,
 };
 
 /* add all new definitions before this point */
 static uint16_t qemu_MAX[] = {
     /* generates a dependency warning, leave it out for now */
     S390_FEAT_MSA_EXT_5,
+    S390_FEAT_INSTRUCTION_EXEC_PROT,

This 'dependency warning' only refers to msa_ext_5, no? Can we make that more obvious?

Quoted 3 lines
target/s390x/gen-features.c +0 -0
 };
 
 /****** END FEATURE DEFS ******/