xtensa: fix build for cores with coprocessors
Subsystems (8)
Sasha Levin
maintainerPATCH 1/17 xtensa: fix build for cores with coprocessors
From: Max Filippov <[email protected]>
[ Upstream commit e3cacb73e626d885b8cf24103fed0ae26518e3c4 ]
Assembly entry/return abstraction change didn't add asmmacro.h include statement to coprocessor.S, resulting in references to undefined macros abi_entry and abi_ret on cores that define XTENSA_HAVE_COPROCESSORS. Fix that by including asm/asmmacro.h from the coprocessor.S.
--- arch/xtensa/kernel/coprocessor.S | 1 + 1 file changed, 1 insertion(+)
arch/xtensa/kernel/coprocessor.S +1 -0
@@ -14,6 +14,7 @@ #include <linux/linkage.h> #include <asm/asm-offsets.h> +#include <asm/asmmacro.h> #include <asm/processor.h> #include <asm/coprocessor.h> #include <asm/thread_info.h>
Signature · 1 line
2.20.1
Sasha Levin
maintainerPATCH 2/17 xen/pciback: remove set but not used variable 'old_state'
From: YueHaibing <[email protected]>
[ Upstream commit 09e088a4903bd0dd911b4f1732b250130cdaffed ]
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/xen/xen-pciback/conf_space_capability.c: In function pm_ctrl_write:drivers/xen/xen-pciback/conf_space_capability.c:119:25: warning:
variable old_state set but not used [-Wunused-but-set-variable]
It is never used so can be removed.
--- drivers/xen/xen-pciback/conf_space_capability.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/xen/xen-pciback/conf_space_capability.c +1 -2
@@ -115,13 +115,12 @@ static int pm_ctrl_write(struct pci_dev *dev, int offset, u16 new_value, {int err;u16 old_value; -pci_power_t new_state, old_state; +pci_power_t new_state; err =pci_read_config_word (dev, offset, &old_value);if (err) goto out; - old_state = (pci_power_t)(old_value &PCI_PM_CTRL_STATE_MASK ); new_state = (pci_power_t)(new_value &PCI_PM_CTRL_STATE_MASK ); new_value &=PM_OK_BITS ;
Signature · 1 line
2.20.1
Sasha Levin
maintainerPATCH 3/17 irqchip/irq-imx-gpcv2: Forward irq type to parent
In reply to Sasha LevinFrom: Lucas Stach <[email protected]>
[ Upstream commit 9a446ef08f3bfc0c3deb9c6be840af2528ef8cf8 ]
The GPCv2 is a stacked IRQ controller below the ARM GIC. It doesn't care about the IRQ type itself, but needs to forward the type to the parent IRQ controller, so this one can be configured correctly.
--- drivers/irqchip/irq-imx-gpcv2.c | 1 + 1 file changed, 1 insertion(+)
drivers/irqchip/irq-imx-gpcv2.c +1 -0
@@ -145,6 +145,7 @@ static struct irq_chip gpcv2_irqchip_data_chip = { .irq_unmask = imx_gpcv2_irq_unmask, .irq_set_wake = imx_gpcv2_irq_set_wake, .irq_retrigger = irq_chip_retrigger_hierarchy, + .irq_set_type = irq_chip_set_type_parent,#ifdef CONFIG_SMP .irq_set_affinity = irq_chip_set_affinity_parent,#endif
Signature · 1 line
2.20.1
Sasha Levin
maintainerPATCH 4/17 perf header: Fix divide by zero error if f_header.attr_size==0
In reply to Sasha LevinFrom: Vince Weaver <[email protected]>
[ Upstream commit 7622236ceb167aa3857395f9bdaf871442aa467e ]
So I have been having lots of trouble with hand-crafted perf.data files causing segfaults and the like, so I have started fuzzing the perf tool.
First issue found:
If f_header.attr_size is 0 in the perf.data file, then perf will crash with a divide-by-zero error.
Committer note:
Added a pr_err() to tell the user why the command failed.
--- tools/perf/util/header.c | 7 +++++++ 1 file changed, 7 insertions(+)
tools/perf/util/header.c +7 -0
@@ -2854,6 +2854,13 @@ int perf_session__read_header(struct perf_session *session) file->path); } +if (f_header.attr_size ==0 ) { +pr_err ("ERROR: The %s file's attr size field is 0 which is unexpected.\n" +"Was the 'perf record' command properly terminated?\n" , + data->file.path); +return -EINVAL ; + } + nr_attrs = f_header.attrs.size / f_header.attr_size;lseek (fd, f_header.attrs.offset,SEEK_SET );
Signature · 1 line
2.20.1
Sasha Levin
maintainerPATCH 5/17 perf header: Fix use of unitialized value warning
In reply to Sasha LevinFrom: Numfor Mbiziwo-Tiapo <[email protected]>
[ Upstream commit 20f9781f491360e7459c589705a2e4b1f136bee9 ]
When building our local version of perf with MSAN (Memory Sanitizer) and running the perf record command, MSAN throws a use of uninitialized value warning in "tools/perf/util/util.c:333:6".
This warning stems from the "buf" variable being passed into "write". It originated as the variable "ev" with the type union perf_event* defined in the "perf_event__synthesize_attr" function in "tools/perf/util/header.c".
In the "perf_event__synthesize_attr" function they allocate space with a malloc call using ev, then go on to only assign some of the member variables before passing "ev" on as a parameter to the "process" function therefore "ev" contains uninitialized memory. Changing the malloc call to zalloc to initialize all the members of "ev" which gets rid of the warning.
To reproduce this warning, build perf by running:
make -C tools/perf CLANG=1 CC=clang EXTRA_CFLAGS="-fsanitize=memory\
-fsanitize-memory-track-origins"
(Additionally, llvm might have to be installed and clang might have to be specified as the compiler - export CC=/usr/bin/clang)
then running:tools/perf/perf record -o - ls / | tools/perf/perf --no-pager annotate\
-i - --stdio
Please see the cover letter for why false positive warnings may be generated.
--- tools/perf/util/header.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
tools/perf/util/header.c +1 -1
@@ -2943,7 +2943,7 @@ int perf_event__synthesize_attr(struct perf_tool *tool, size +=sizeof (struct perf_event_header ); size += ids *sizeof (u64); - ev =malloc (size); + ev =zalloc (size);if (ev ==NULL )return -ENOMEM ;
Signature · 1 line
2.20.1
Sasha Levin
maintainerPATCH 6/17 libata: zpodd: Fix small read overflow in zpodd_get_mech_type()
In reply to Sasha LevinFrom: Kees Cook <[email protected]>
[ Upstream commit 71d6c505b4d9e6f76586350450e785e3d452b346 ]
Jeffrin reported a KASAN issue:
BUG: KASAN: global-out-of-bounds in ata_exec_internal_sg+0x50f/0xc70
Read of size 16 at addr ffffffff91f41f80 by task scsi_eh_1/149
...
The buggy address belongs to the variable:
cdb.48319+0x0/0x40Much like commit 18c9a99bce2a ("libata: zpodd: small read overflow in eject_tray()"), this fixes a cdb[] buffer length, this time in zpodd_get_mech_type():
We read from the cdb[] buffer in ata_exec_internal_sg(). It has to be ATAPI_CDB_LEN (16) bytes long, but this buffer is only 12 bytes.
--- drivers/ata/libata-zpodd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/ata/libata-zpodd.c +1 -1
@@ -55,7 +55,7 @@ static enum odd_mech_type zpodd_get_mech_type(struct ata_device *dev)unsigned int ret;struct rm_feature_desc *desc;struct ata_taskfile tf; -static const char cdb[] = {GPCMD_GET_CONFIGURATION , +static const char cdb[ATAPI_CDB_LEN ] = {GPCMD_GET_CONFIGURATION ,2 ,/* only 1 feature descriptor requested */ 0 ,3 ,/* 3, removable medium feature */ 0 ,0 ,0 ,/* reserved */
Signature · 1 line
2.20.1
Sasha Levin
maintainerPATCH 7/17 scsi: hpsa: correct scsi command status issue after reset
In reply to Sasha LevinFrom: Don Brace <[email protected]>
[ Upstream commit eeebce1862970653cdf5c01e98bc669edd8f529a ]
--- drivers/scsi/hpsa.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)
drivers/scsi/hpsa.c +11 -1
@@ -2236,6 +2236,8 @@ static int handle_ioaccel_mode2_error(struct ctlr_info *h,case IOACCEL2_SERV_RESPONSE_COMPLETE :switch (c2->error_data.status) {case IOACCEL2_STATUS_SR_TASK_COMP_GOOD : +if (cmd) + cmd->result =0 ;break ;case IOACCEL2_STATUS_SR_TASK_COMP_CHK_COND : cmd->result |=SAM_STAT_CHECK_CONDITION ;
@@ -2423,8 +2425,10 @@ static void process_ioaccel2_completion(struct ctlr_info *h,/* check for good status */ if (likely (c2->error_data.serv_response ==0 && - c2->error_data.status ==0 )) + c2->error_data.status ==0 )) { + cmd->result =0 ;return hpsa_cmd_free_and_done (h, c, cmd); + }/* * Any RAID offload error results in retry which will use
@@ -5511,6 +5515,12 @@ static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd) } c =cmd_tagged_alloc (h, cmd); +/* +* This is necessary because the SML doesn't zero out this field during +* error recovery. +*/ + cmd->result =0 ; +/* * Call alternate submit routine for I/O accelerated commands. * Retries always go down the normal I/O path.
Signature · 1 line
2.20.1
Sasha Levin
maintainerPATCH 8/17 exit: make setting exit_state consistent
In reply to Sasha LevinFrom: Christian Brauner <[email protected]>
[ Upstream commit 30b692d3b390c6fe78a5064be0c4bbd44a41be59 ]
Since commit b191d6491be6 ("pidfd: fix a poll race when setting exit_state") we unconditionally set exit_state to EXIT_ZOMBIE before calling into do_notify_parent(). This was done to eliminate a race when querying exit_state in do_notify_pidfd().
Back then we decided to do the absolute minimal thing to fix this and not touch the rest of the exit_notify() function where exit_state is set.
Since this fix has not caused any issues change the setting of exit_state to EXIT_DEAD in the autoreap case to account for the fact hat exit_state is set to EXIT_ZOMBIE unconditionally. This fix was planned but also explicitly requested in [1] and makes the whole code more consistent.
/* References */
[1]: https://lore.kernel.org/lkml/CAHk-=wigcxGFR2szue4wavJtH5cYTTeNES=toUBVGsmX0rzX+g@mail.gmail.com
--- kernel/exit.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
kernel/exit.c +3 -2
@@ -694,9 +694,10 @@ static void exit_notify(struct task_struct *tsk, int group_dead) autoreap = true; } - tsk->exit_state = autoreap ?EXIT_DEAD :EXIT_ZOMBIE ; -if (tsk->exit_state ==EXIT_DEAD ) +if (autoreap) { + tsk->exit_state =EXIT_DEAD ;list_add (&tsk->ptrace_entry, &dead); + }/* mt-exec, de_thread() is waiting for group leader */ if (unlikely (tsk->signal->notify_count <0 ))
Signature · 1 line
2.20.1
Sasha Levin
maintainerPATCH 9/17 ata: libahci: do not complain in case of deferred probe
In reply to Sasha LevinFrom: Miquel Raynal <[email protected]>
[ Upstream commit 090bb803708198e5ab6b0046398c7ed9f4d12d6b ]
Retrieving PHYs can defer the probe, do not spawn an error when -EPROBE_DEFER is returned, it is normal behavior.
--- drivers/ata/libahci_platform.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/ata/libahci_platform.c +3 -0
@@ -300,6 +300,9 @@ static int ahci_platform_get_phy(struct ahci_host_priv *hpriv, u32 port, hpriv->phys[port] =NULL ; rc =0 ;break ; +case -EPROBE_DEFER : +/* Do not complain yet */ +break ;default : dev_err(dev,
Signature · 1 line
2.20.1
Sasha Levin
maintainerPATCH 10/17 kbuild: modpost: handle KBUILD_EXTRA_SYMBOLS only for external modules
In reply to Sasha LevinFrom: Masahiro Yamada <[email protected]>
[ Upstream commit cb4819934a7f9b87876f11ed05b8624c0114551b ]
KBUILD_EXTRA_SYMBOLS makes sense only when building external modules. Moreover, the modpost sets 'external_module' if the -e option is given.
I replaced $(patsubst %, -e %,...) with simpler $(addprefix -e,...) while I was here.
--- scripts/Makefile.modpost | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
scripts/Makefile.modpost +1 -1
@@ -74,7 +74,7 @@ modpost = scripts/mod/modpost \ $(if $(CONFIG_MODULE_SRCVERSION_ALL),-a,) \ $(if $(KBUILD_EXTMOD),-i,-o) $(kernelsymfile) \ $(if $(KBUILD_EXTMOD),-I $(modulesymfile)) \ - $(if $(KBUILD_EXTRA_SYMBOLS), $(patsubst %, -e %,$(KBUILD_EXTRA_SYMBOLS))) \ + $(if $(KBUILD_EXTMOD),$(addprefix -e ,$(KBUILD_EXTRA_SYMBOLS))) \ $(if $(KBUILD_EXTMOD),-o $(modulesymfile)) \ $(if $(CONFIG_DEBUG_SECTION_MISMATCH),,-S) \ $(if $(CONFIG_SECTION_MISMATCH_WARN_ONLY),,-E) \
Signature · 1 line
2.20.1
Sasha Levin
maintainerPATCH 11/17 arm64/efi: fix variable 'si' set but not used
In reply to Sasha LevinFrom: Qian Cai <[email protected]>
[ Upstream commit f1d4836201543e88ebe70237e67938168d5fab19 ]
GCC throws out this warning on arm64.
drivers/firmware/efi/libstub/arm-stub.c: In function 'efi_entry':drivers/firmware/efi/libstub/arm-stub.c:132:22: warning: variable 'si' set but not used [-Wunused-but-set-variable]
Fix it by making free_screen_info() a static inline function.
--- arch/arm64/include/asm/efi.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
arch/arm64/include/asm/efi.h +5 -1
@@ -52,7 +52,11 @@ int efi_set_mapping_permissions(struct mm_struct *mm, efi_memory_desc_t *md);#define efi_is_64bit () (true) #define alloc_screen_info(x...) &screen_info -#define free_screen_info(x...) + +static inline void free_screen_info (efi_system_table_t *sys_table_arg, +struct screen_info *si) +{ +}/* redeclare as 'hidden' so the compiler will generate relative references */ extern struct screen_info screen_info __attribute__((__visibility__("hidden")));
Signature · 1 line
2.20.1
Sasha Levin
maintainerPATCH 12/17 arm64/mm: fix variable 'pud' set but not used
In reply to Sasha LevinFrom: Qian Cai <[email protected]>
[ Upstream commit 7d4e2dcf311d3b98421d1f119efe5964cafa32fc ]
GCC throws a warning,
arch/arm64/mm/mmu.c: In function 'pud_free_pmd_page':arch/arm64/mm/mmu.c:1033:8: warning: variable 'pud' set but not used [-Wunused-but-set-variable]
pud_t pud;
^~~because pud_table() is a macro and compiled away. Fix it by making it a static inline function and for pud_sect() as well.
--- arch/arm64/include/asm/pgtable.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm64/include/asm/pgtable.h +2 -2
@@ -387,8 +387,8 @@ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, PMD_TYPE_SECT)#if defined(CONFIG_ARM64_64K_PAGES ) ||CONFIG_PGTABLE_LEVELS <3 -#define pud_sect (pud) (0) -#define pud_table (pud) (1) +static inline bool pud_sect (pud_t pud) {return false; } +static inline bool pud_table (pud_t pud) {return true; }#else #define pud_sect (pud) ((pud_val(pud) & PUD_TYPE_MASK) == \ PUD_TYPE_SECT)
Signature · 1 line
2.20.1
Sasha Levin
maintainerPATCH 13/17 IB/core: Add mitigation for Spectre V1
In reply to Sasha LevinFrom: "Luck, Tony" <[email protected]>
[ Upstream commit 61f259821dd3306e49b7d42a3f90fb5a4ff3351b ]
Some processors may mispredict an array bounds check and speculatively access memory that they should not. With a user supplied array index we like to play things safe by masking the value with the array size before it is used as an index.
--- drivers/infiniband/core/user_mad.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/infiniband/core/user_mad.c +5 -1
@@ -49,6 +49,7 @@#include <linux/sched.h> #include <linux/semaphore.h> #include <linux/slab.h> +#include <linux/nospec.h> #include <asm/uaccess.h>
@@ -843,11 +844,14 @@ static int ib_umad_unreg_agent(struct ib_umad_file *file, u32 __user *arg)if (get_user (id, arg))return -EFAULT ; +if (id >=IB_UMAD_MAX_AGENTS ) +return -EINVAL ;mutex_lock (&file->port->file_mutex);mutex_lock (&file->mutex); -if (id >=IB_UMAD_MAX_AGENTS || !__get_agent (file, id)) { + id =array_index_nospec (id,IB_UMAD_MAX_AGENTS ); +if (!__get_agent (file, id)) { ret = -EINVAL ; goto out; }
Signature · 1 line
2.20.1
Sasha Levin
maintainerPATCH 14/17 IB/mad: Fix use-after-free in ib mad completion handling
In reply to Sasha LevinFrom: Jack Morgenstein <[email protected]>
[ Upstream commit 770b7d96cfff6a8bf6c9f261ba6f135dc9edf484 ]
We encountered a use-after-free bug when unloading the driver:
[ 3562.116059] BUG: KASAN: use-after-free in ib_mad_post_receive_mads+0xddc/0xed0 [ib_core] [ 3562.117233] Read of size 4 at addr ffff8882ca5aa868 by task kworker/u13:2/23862 [ 3562.118385] [ 3562.119519] CPU: 2 PID: 23862 Comm: kworker/u13:2 Tainted: G OE 5.1.0-for-upstream-dbg-2019-05-19_16-44-30-13 #1 [ 3562.121806] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014 [ 3562.123075] Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core] [ 3562.124383] Call Trace: [ 3562.125640] dump_stack+0x9a/0xeb [ 3562.126911] print_address_description+0xe3/0x2e0 [ 3562.128223] ? ib_mad_post_receive_mads+0xddc/0xed0 [ib_core] [ 3562.129545] __kasan_report+0x15c/0x1df [ 3562.130866] ? ib_mad_post_receive_mads+0xddc/0xed0 [ib_core] [ 3562.132174] kasan_report+0xe/0x20 [ 3562.133514] ib_mad_post_receive_mads+0xddc/0xed0 [ib_core] [ 3562.134835] ? find_mad_agent+0xa00/0xa00 [ib_core] [ 3562.136158] ? qlist_free_all+0x51/0xb0 [ 3562.137498] ? mlx4_ib_sqp_comp_worker+0x1970/0x1970 [mlx4_ib] [ 3562.138833] ? quarantine_reduce+0x1fa/0x270 [ 3562.140171] ? kasan_unpoison_shadow+0x30/0x40 [ 3562.141522] ib_mad_recv_done+0xdf6/0x3000 [ib_core] [ 3562.142880] ? _raw_spin_unlock_irqrestore+0x46/0x70 [ 3562.144277] ? ib_mad_send_done+0x1810/0x1810 [ib_core] [ 3562.145649] ? mlx4_ib_destroy_cq+0x2a0/0x2a0 [mlx4_ib] [ 3562.147008] ? _raw_spin_unlock_irqrestore+0x46/0x70 [ 3562.148380] ? debug_object_deactivate+0x2b9/0x4a0 [ 3562.149814] __ib_process_cq+0xe2/0x1d0 [ib_core] [ 3562.151195] ib_cq_poll_work+0x45/0xf0 [ib_core] [ 3562.152577] process_one_work+0x90c/0x1860 [ 3562.153959] ? pwq_dec_nr_in_flight+0x320/0x320 [ 3562.155320] worker_thread+0x87/0xbb0 [ 3562.156687] ? __kthread_parkme+0xb6/0x180 [ 3562.158058] ? process_one_work+0x1860/0x1860 [ 3562.159429] kthread+0x320/0x3e0 [ 3562.161391] ? kthread_park+0x120/0x120 [ 3562.162744] ret_from_fork+0x24/0x30 ... [ 3562.187615] Freed by task 31682: [ 3562.188602] save_stack+0x19/0x80 [ 3562.189586] __kasan_slab_free+0x11d/0x160 [ 3562.190571] kfree+0xf5/0x2f0 [ 3562.191552] ib_mad_port_close+0x200/0x380 [ib_core] [ 3562.192538] ib_mad_remove_device+0xf0/0x230 [ib_core] [ 3562.193538] remove_client_context+0xa6/0xe0 [ib_core] [ 3562.194514] disable_device+0x14e/0x260 [ib_core] [ 3562.195488] __ib_unregister_device+0x79/0x150 [ib_core] [ 3562.196462] ib_unregister_device+0x21/0x30 [ib_core] [ 3562.197439] mlx4_ib_remove+0x162/0x690 [mlx4_ib] [ 3562.198408] mlx4_remove_device+0x204/0x2c0 [mlx4_core] [ 3562.199381] mlx4_unregister_interface+0x49/0x1d0 [mlx4_core] [ 3562.200356] mlx4_ib_cleanup+0xc/0x1d [mlx4_ib] [ 3562.201329] __x64_sys_delete_module+0x2d2/0x400 [ 3562.202288] do_syscall_64+0x95/0x470 [ 3562.203277] entry_SYSCALL_64_after_hwframe+0x49/0xbe
The problem was that the MAD PD was deallocated before the MAD CQ. There was completion work pending for the CQ when the PD got deallocated. When the mad completion handling reached procedure ib_mad_post_receive_mads(), we got a use-after-free bug in the following line of code in that procedure:
sg_list.lkey = qp_info->port_priv->pd->local_dma_lkey;
(the pd pointer in the above line is no longer valid, because the pd has been deallocated).
We fix this by allocating the PD before the CQ in procedure ib_mad_port_open(), and deallocating the PD after freeing the CQ in procedure ib_mad_port_close().
Since the CQ completion work queue is flushed during ib_free_cq(), no completions will be pending for that CQ when the PD is later deallocated.
Note that freeing the CQ before deallocating the PD is the practice in the ULPs.
--- drivers/infiniband/core/mad.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-)
drivers/infiniband/core/mad.c +10 -10
@@ -3155,18 +3155,18 @@ static int ib_mad_port_open(struct ib_device *device,if (has_smi) cq_size *=2 ; + port_priv->pd =ib_alloc_pd (device,0 ); +if (IS_ERR (port_priv->pd)) { +dev_err (&device->dev,"Couldn't create ib_mad PD\n" ); + ret =PTR_ERR (port_priv->pd); + goto error3; + } + port_priv->cq =ib_alloc_cq (port_priv->device, port_priv, cq_size,0 ,IB_POLL_WORKQUEUE );if (IS_ERR (port_priv->cq)) {dev_err (&device->dev,"Couldn't create ib_mad CQ\n" ); ret =PTR_ERR (port_priv->cq); - goto error3; - } - - port_priv->pd =ib_alloc_pd (device,0 ); -if (IS_ERR (port_priv->pd)) { -dev_err (&device->dev,"Couldn't create ib_mad PD\n" ); - ret =PTR_ERR (port_priv->pd); goto error4; }
@@ -3209,11 +3209,11 @@ static int ib_mad_port_open(struct ib_device *device, error7:destroy_mad_qp (&port_priv->qp_info[0 ]); error6: -ib_dealloc_pd (port_priv->pd); -error4:ib_free_cq (port_priv->cq);cleanup_recv_queue (&port_priv->qp_info[1 ]);cleanup_recv_queue (&port_priv->qp_info[0 ]); +error4: +ib_dealloc_pd (port_priv->pd); error3:kfree (port_priv);
@@ -3243,8 +3243,8 @@ static int ib_mad_port_close(struct ib_device *device, int port_num)destroy_workqueue (port_priv->wq);destroy_mad_qp (&port_priv->qp_info[1 ]);destroy_mad_qp (&port_priv->qp_info[0 ]); -ib_dealloc_pd (port_priv->pd);ib_free_cq (port_priv->cq); +ib_dealloc_pd (port_priv->pd);cleanup_recv_queue (&port_priv->qp_info[1 ]);cleanup_recv_queue (&port_priv->qp_info[0 ]);/* XXX: Handle deallocation of MAD registration tables */
Signature · 1 line
2.20.1
Sasha Levin
maintainerPATCH 15/17 ocfs2: remove set but not used variable 'last_hash'
In reply to Sasha LevinFrom: YueHaibing <[email protected]>
[ Upstream commit 7bc36e3ce91471b6377c8eadc0a2f220a2280083 ]
Fixes gcc '-Wunused-but-set-variable' warning:
fs/ocfs2/xattr.c: In function ocfs2_xattr_bucket_find:
fs/ocfs2/xattr.c:3828:6: warning: variable last_hash set but not used [-Wunused-but-set-variable]
It's never used and can be removed.
--- fs/ocfs2/xattr.c | 3 --- 1 file changed, 3 deletions(-)
fs/ocfs2/xattr.c +0 -3
@@ -3832,7 +3832,6 @@ static int ocfs2_xattr_bucket_find(struct inode *inode,u16 blk_per_bucket =ocfs2_blocks_per_xattr_bucket (inode->i_sb);int low_bucket =0 , bucket, high_bucket;struct ocfs2_xattr_bucket *search; -u32 last_hash;u64 blkno, lower_blkno =0 ; search =ocfs2_xattr_bucket_new (inode);
@@ -3876,8 +3875,6 @@ static int ocfs2_xattr_bucket_find(struct inode *inode,if (xh->xh_count) xe = &xh->xh_entries[le16_to_cpu (xh->xh_count) -1 ]; - last_hash =le32_to_cpu (xe->xe_name_hash); -/* record lower_blkno which may be the insert place. */ lower_blkno = blkno;
Signature · 1 line
2.20.1
Sasha Levin
maintainerPATCH 16/17 coredump: split pipe command whitespace before expanding template
In reply to Sasha LevinFrom: Paul Wise <[email protected]>
[ Upstream commit 315c69261dd3fa12dbc830d4fa00d1fad98d3b03 ]
Save the offsets of the start of each argument to avoid having to update pointers to each argument after every corename krealloc and to avoid having to duplicate the memory for the dump command.
Executable names containing spaces were previously being expanded from %e or %E and then split in the middle of the filename. This is incorrect behaviour since an argument list can represent arguments with spaces.
The splitting could lead to extra arguments being passed to the core dump handler that it might have interpreted as options or ignored completely.
Core dump handlers that are not aware of this Linux kernel issue will be using %e or %E without considering that it may be split and so they will be vulnerable to processes with spaces in their names breaking their argument list. If their internals are otherwise well written, such as if they are written in shell but quote arguments, they will work better after this change than before. If they are not well written, then there is a slight chance of breakage depending on the details of the code but they will already be fairly broken by the split filenames.
Core dump handlers that are aware of this Linux kernel issue will be placing %e or %E as the last item in their core_pattern and then aggregating all of the remaining arguments into one, separated by spaces. Alternatively they will be obtaining the filename via other methods. Both of these will be compatible with the new arrangement.
A side effect from this change is that unknown template types (for example %z) result in an empty argument to the dump handler instead of the argument being dropped. This is a desired change as:
It is easier for dump handlers to process empty arguments than dropped ones, especially if they are written in shell or don't pass each template item with a preceding command-line option in order to differentiate between individual template types. Most core_patterns in the wild do not use options so they can confuse different template types (especially numeric ones) if an earlier one gets dropped in old kernels. If the kernel introduces a new template type and a core_pattern uses it, the core dump handler might not expect that the argument can be dropped in old kernels.
For example, this can result in security issues when %d is dropped in old kernels. This happened with the corekeeper package in Debian and resulted in the interface between corekeeper and Linux having to be rewritten to use command-line options to differentiate between template types.
The core_pattern for most core dump handlers is written by the handler author who would generally not insert unknown template types so this change should be compatible with all the core dump handlers that exist.
--- fs/coredump.c | 44 +++++++++++++++++++++++++++++++++++++++----- 1 file changed, 39 insertions(+), 5 deletions(-)
fs/coredump.c +39 -5
@@ -6,6 +6,7 @@#include <linux/stat.h> #include <linux/fcntl.h> #include <linux/swap.h> +#include <linux/ctype.h> #include <linux/string.h> #include <linux/init.h> #include <linux/pagemap.h>
@@ -184,11 +185,13 @@ static int cn_print_exe_file(struct core_name *cn)* name into corename, which must have space for at least * CORENAME_MAX_SIZE bytes plus one byte for the zero terminator. */ -static int format_corename (struct core_name *cn,struct coredump_params *cprm) +static int format_corename (struct core_name *cn,struct coredump_params *cprm, +size_t **argv,int *argc) {const struct cred *cred =current_cred ();const char *pat_ptr = core_pattern;int ispipe = (*pat_ptr =='|' ); +bool was_space = false;int pid_in_pattern =0 ;int err =0 ;
@@ -198,12 +201,35 @@ static int format_corename(struct core_name *cn, struct coredump_params *cprm)return -ENOMEM ; cn->corename[0 ] ='\0' ; -if (ispipe) +if (ispipe) { +int argvs =sizeof (core_pattern) /2 ; + (*argv) =kmalloc_array (argvs,sizeof (**argv),GFP_KERNEL ); +if (!(*argv)) +return -ENOMEM ; + (*argv)[(*argc)++] =0 ; ++pat_ptr; + }/* Repeat as long as we have more pattern to process and more output space */ while (*pat_ptr) { +/* +* Split on spaces before doing template expansion so that +* %e and %E don't get split if they have spaces in them +*/ +if (ispipe) { +if (isspace (*pat_ptr)) { + was_space = true; + pat_ptr++; +continue ; + }else if (was_space) { + was_space = false; + err =cn_printf (cn,"%c" ,'\0' ); +if (err) +return err; + (*argv)[(*argc)++] = cn->used; + } + }if (*pat_ptr !='%' ) { err =cn_printf (cn,"%c" , *pat_ptr++); }else {
@@ -543,6 +569,8 @@ void do_coredump(const siginfo_t *siginfo)struct cred *cred;int retval =0 ;int ispipe; +size_t *argv =NULL ; +int argc =0 ;struct files_struct *displaced;/* require nonrelative corefile path and be extra careful */ bool need_suid_safe = false;
@@ -589,9 +617,10 @@ void do_coredump(const siginfo_t *siginfo) old_cred =override_creds (cred); - ispipe =format_corename (&cn, &cprm); + ispipe =format_corename (&cn, &cprm, &argv, &argc);if (ispipe) { +int argi;int dump_count;char **helper_argv;struct subprocess_info *sub_info;
@@ -634,12 +663,16 @@ void do_coredump(const siginfo_t *siginfo) goto fail_dropcount; } - helper_argv =argv_split (GFP_KERNEL , cn.corename,NULL ); + helper_argv =kmalloc_array (argc +1 ,sizeof (*helper_argv), +GFP_KERNEL );if (!helper_argv) {printk (KERN_WARNING "%s failed to allocate memory\n" , __func__); goto fail_dropcount; } +for (argi =0 ; argi < argc; argi++) + helper_argv[argi] = cn.corename + argv[argi]; + helper_argv[argi] =NULL ; retval = -ENOMEM ; sub_info = call_usermodehelper_setup(helper_argv[0],
@@ -649,7 +682,7 @@ void do_coredump(const siginfo_t *siginfo) retval =call_usermodehelper_exec (sub_info,UMH_WAIT_EXEC ); -argv_free (helper_argv); +kfree (helper_argv);if (retval) {printk (KERN_INFO "Core dump to |%s pipe failed\n" , cn.corename);
@@ -768,6 +801,7 @@ void do_coredump(const siginfo_t *siginfo)if (ispipe)atomic_dec (&core_dump_count); fail_unlock: +kfree (argv);kfree (cn.corename);coredump_finish (mm, core_dumped);revert_creds (old_cred);
Signature · 1 line
2.20.1
Sasha Levin
maintainerPATCH 17/17 asm-generic: fix -Wtype-limits compiler warnings
In reply to Sasha LevinFrom: Qian Cai <[email protected]>
[ Upstream commit cbedfe11347fe418621bd188d58a206beb676218 ]
Commit d66acc39c7ce ("bitops: Optimise get_order()") introduced a compilation warning because "rx_frag_size" is an "ushort" while PAGE_SHIFT here is 16.
The commit changed the get_order() to be a multi-line macro where compilers insist to check all statements in the macro even when __builtin_constant_p(rx_frag_size) will return false as "rx_frag_size" is a module parameter.
In file included from ./arch/powerpc/include/asm/page_64.h:107,
from ./arch/powerpc/include/asm/page.h:242,
from ./arch/powerpc/include/asm/mmu.h:132,
from ./arch/powerpc/include/asm/lppaca.h:47,
from ./arch/powerpc/include/asm/paca.h:17,
from ./arch/powerpc/include/asm/current.h:13,
from ./include/linux/thread_info.h:21,
from ./arch/powerpc/include/asm/processor.h:39,
from ./include/linux/prefetch.h:15,
from drivers/net/ethernet/emulex/benet/be_main.c:14:
drivers/net/ethernet/emulex/benet/be_main.c: In function 'be_rx_cqs_create':
./include/asm-generic/getorder.h:54:9: warning: comparison is always
true due to limited range of data type [-Wtype-limits]
(((n) < (1UL << PAGE_SHIFT)) ? 0 : \
^
drivers/net/ethernet/emulex/benet/be_main.c:3138:33: note: in expansion
of macro 'get_order'
adapter->big_page_size = (1 << get_order(rx_frag_size)) * PAGE_SIZE;
^~~~~~~~~Fix it by moving all of this multi-line macro into a proper function, and killing __get_order() off.
--- include/asm-generic/getorder.h | 50 ++++++++++++++-------------------- 1 file changed, 20 insertions(+), 30 deletions(-)
include/asm-generic/getorder.h +20 -30
@@ -6,24 +6,6 @@#include <linux/compiler.h> #include <linux/log2.h> -/* -* Runtime evaluation of get_order() -*/ -static inline __attribute_const__ -int __get_order(unsigned long size) -{ -int order; - - size--; - size >>=PAGE_SHIFT ; -#if BITS_PER_LONG ==32 - order =fls (size); -#else - order =fls64 (size); -#endif -return order; -} -/** * get_order - Determine the allocation order of a memory size * @size: The size for which to get the order
@@ -42,19 +24,27 @@ int __get_order(unsigned long size)* to hold an object of the specified size. * * The result is undefined if the size is 0. -* -* This function may be used to initialise variables with compile time -* evaluations of constants. */ -#define get_order (n) \ -( \ - __builtin_constant_p(n) ? ( \ - ((n) == 0UL) ? BITS_PER_LONG - PAGE_SHIFT : \ - (((n) < (1UL << PAGE_SHIFT)) ? 0 : \ - ilog2((n) - 1) - PAGE_SHIFT + 1) \ - ) : \ - __get_order(n) \ -) +static inline __attribute_const__ int get_order(unsigned long size) +{ +if (__builtin_constant_p (size)) { +if (!size) +return BITS_PER_LONG -PAGE_SHIFT ; + +if (size < (1UL <<PAGE_SHIFT )) +return 0 ; + +return ilog2 ((size) -1 ) -PAGE_SHIFT +1 ; + } + + size--; + size >>=PAGE_SHIFT ; +#if BITS_PER_LONG ==32 +return fls (size); +#else +return fls64 (size); +#endif +}#endif /* __ASSEMBLY__ */
Signature · 1 line
2.20.1