Skip to contentSkip to conversation

RFC: remove sn2, hpsim and ia64 machvecs

PATCH New Christoph Hellwig 3 participants 37 messages Aug 7, 2019 – Aug 9, 2019

Subsystems (13)
Documentation SCSI ACPI PCI +9 more subsystems
lore
Share & tools
lore
#1 lore raw

PATCH 1/29 char: remove the SGI snsc driver

The SGI SN2 support is about to be removed. Remove this driver that depends on the SN2 support.

---
 arch/ia64/configs/generic_defconfig   |   1 -
 arch/ia64/configs/gensparse_defconfig |   1 -
 drivers/char/Kconfig                  |   8 -
 drivers/char/Makefile                 |   1 -
 drivers/char/snsc.c                   | 469 --------------------------
 drivers/char/snsc.h                   |  92 -----
 drivers/char/snsc_event.c             | 303 -----------------
 7 files changed, 875 deletions(-)
 delete mode 100644 drivers/char/snsc.c
 delete mode 100644 drivers/char/snsc.h
 delete mode 100644 drivers/char/snsc_event.c
arch/ia64/configs/generic_defconfig +0 -1
index 81f686dee53c..22b98ddc9913 100644
@@ -90,7 +90,6 @@ CONFIG_IGB=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_GAMEPORT=m
 CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_SGI_SNSC=y
 CONFIG_SGI_TIOCX=y
 CONFIG_SGI_MBCS=m
 CONFIG_SERIAL_8250=y
arch/ia64/configs/gensparse_defconfig +0 -1
index 5b4fcdd51457..1d230c0a90bd 100644
@@ -79,7 +79,6 @@ CONFIG_E1000=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_GAMEPORT=m
 CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_SGI_SNSC=y
 CONFIG_SGI_TIOCX=y
 CONFIG_SGI_MBCS=m
 CONFIG_SERIAL_8250=y
drivers/char/Kconfig +0 -8
index 3e866885a405..c9fbbc6a3967 100644
@@ -26,14 +26,6 @@ config DEVKMEM
 	  kind of kernel debugging operations.
 	  When in doubt, say "N".
 
-config SGI_SNSC
-	bool "SGI Altix system controller communication support"
-	depends on (IA64_SGI_SN2 || IA64_GENERIC)
-	help
-	  If you have an SGI Altix and you want to enable system
-	  controller communication from user space (you want this!),
-	  say Y.  Otherwise, say N.
-
 config SGI_TIOCX
        bool "SGI TIO CX driver support"
        depends on (IA64_SGI_SN2 || IA64_GENERIC)
drivers/char/Makefile +0 -1
index fbea7dd12932..50835d420471 100644
@@ -9,7 +9,6 @@ obj-y				+= misc.o
 obj-$(CONFIG_ATARI_DSP56K)	+= dsp56k.o
 obj-$(CONFIG_VIRTIO_CONSOLE)	+= virtio_console.o
 obj-$(CONFIG_RAW_DRIVER)	+= raw.o
-obj-$(CONFIG_SGI_SNSC)		+= snsc.o snsc_event.o
 obj-$(CONFIG_MSPEC)		+= mspec.o
 obj-$(CONFIG_UV_MMTIMER)	+= uv_mmtimer.o
 obj-$(CONFIG_IBM_BSR)		+= bsr.o
drivers/char/snsc.c deleted +0 -469

469 lines not on this page · raw message

drivers/char/snsc.h deleted +0 -92

92 lines not on this page · raw message

drivers/char/snsc_event.c deleted +0 -303

303 lines not on this page · raw message

Signature · 1 line
2.20.1
#2 lore raw

PATCH 2/29 char: remove the SGI tiocx/mbcs driver

In reply to Christoph Hellwig

The SGI SN2 support is about to be removed. Remove this driver that depends on the SN2 support.

---
 arch/ia64/configs/generic_defconfig   |   2 -
 arch/ia64/configs/gensparse_defconfig |   2 -
 arch/ia64/sn/kernel/Makefile          |   1 -
 arch/ia64/sn/kernel/tiocx.c           | 569 ------------------
 drivers/char/Kconfig                  |  14 -
 drivers/char/Makefile                 |   1 -
 drivers/char/mbcs.c                   | 831 --------------------------
 drivers/char/mbcs.h                   | 553 -----------------
 8 files changed, 1973 deletions(-)
 delete mode 100644 arch/ia64/sn/kernel/tiocx.c
 delete mode 100644 drivers/char/mbcs.c
 delete mode 100644 drivers/char/mbcs.h
arch/ia64/configs/generic_defconfig +0 -2
index 22b98ddc9913..1fc4d5a77e0d 100644
@@ -90,8 +90,6 @@ CONFIG_IGB=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_GAMEPORT=m
 CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_SGI_TIOCX=y
-CONFIG_SGI_MBCS=m
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=6
arch/ia64/configs/gensparse_defconfig +0 -2
index 1d230c0a90bd..289ed714ad8b 100644
@@ -79,8 +79,6 @@ CONFIG_E1000=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_GAMEPORT=m
 CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_SGI_TIOCX=y
-CONFIG_SGI_MBCS=m
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=6
arch/ia64/sn/kernel/Makefile +0 -1
index 9c349dd23265..2f580603370d 100644
@@ -14,5 +14,4 @@ obj-y				+= setup.o bte.o bte_error.o irq.o mca.o idle.o \
 				   io_init.o iomv.o klconflib.o pio_phys.o \
 				   sn2/
 obj-$(CONFIG_IA64_GENERIC)      += machvec.o
-obj-$(CONFIG_SGI_TIOCX)		+= tiocx.o
 obj-$(CONFIG_PCI_MSI)		+= msi_sn.o
arch/ia64/sn/kernel/tiocx.c deleted +0 -568

568 lines not on this page · raw message

drivers/char/Kconfig +0 -14
index c9fbbc6a3967..96156c729a31 100644
@@ -26,20 +26,6 @@ config DEVKMEM
 	  kind of kernel debugging operations.
 	  When in doubt, say "N".
 
-config SGI_TIOCX
-       bool "SGI TIO CX driver support"
-       depends on (IA64_SGI_SN2 || IA64_GENERIC)
-       help
-         If you have an SGI Altix and you have fpga devices attached
-         to your TIO, say Y here, otherwise say N.
-
-config SGI_MBCS
-       tristate "SGI FPGA Core Services driver support"
-       depends on SGI_TIOCX
-       help
-         If you have an SGI Altix with an attached SABrick
-         say Y or M here, otherwise say N.
-
 source "drivers/tty/serial/Kconfig"
 source "drivers/tty/serdev/Kconfig"
 
drivers/char/Makefile +0 -1
index 50835d420471..7c5ea6f9df14 100644
@@ -12,7 +12,6 @@ obj-$(CONFIG_RAW_DRIVER)	+= raw.o
 obj-$(CONFIG_MSPEC)		+= mspec.o
 obj-$(CONFIG_UV_MMTIMER)	+= uv_mmtimer.o
 obj-$(CONFIG_IBM_BSR)		+= bsr.o
-obj-$(CONFIG_SGI_MBCS)		+= mbcs.o
 
 obj-$(CONFIG_PRINTER)		+= lp.o
 
drivers/char/mbcs.c deleted +0 -825

825 lines not on this page · raw message

drivers/char/mbcs.h deleted +0 -553

553 lines not on this page · raw message

Signature · 1 line
2.20.1
#3 lore raw

PATCH 3/29 char/agp: remove the sgi-agp driver

In reply to Christoph Hellwig

The SGI SN2 support is about to be removed. Remove this driver that depends on the SN2 support.

---
 arch/ia64/configs/generic_defconfig   |   1 -
 arch/ia64/configs/gensparse_defconfig |   1 -
 drivers/char/agp/Kconfig              |   7 -
 drivers/char/agp/Makefile             |   1 -
 drivers/char/agp/sgi-agp.c            | 338 --------------------------
 5 files changed, 348 deletions(-)
 delete mode 100644 drivers/char/agp/sgi-agp.c
arch/ia64/configs/generic_defconfig +0 -1
index 1fc4d5a77e0d..79b88384c885 100644
@@ -104,7 +104,6 @@ CONFIG_HPET=y
 CONFIG_AGP=m
 CONFIG_AGP_I460=m
 CONFIG_AGP_HP_ZX1=m
-CONFIG_AGP_SGI_TIOCA=m
 CONFIG_DRM=m
 CONFIG_DRM_TDFX=m
 CONFIG_DRM_R128=m
arch/ia64/configs/gensparse_defconfig +0 -1
index 289ed714ad8b..f1490580ed69 100644
@@ -94,7 +94,6 @@ CONFIG_HPET=y
 CONFIG_AGP=m
 CONFIG_AGP_I460=m
 CONFIG_AGP_HP_ZX1=m
-CONFIG_AGP_SGI_TIOCA=m
 CONFIG_DRM=m
 CONFIG_DRM_TDFX=m
 CONFIG_DRM_R128=m
drivers/char/agp/Kconfig +0 -7
index 6231714ef3c8..be50d7a93f4c 100644
@@ -150,13 +150,6 @@ config AGP_EFFICEON
 	  This option gives you AGP support for the Transmeta Efficeon
 	  series processors with integrated northbridges.
 
-config AGP_SGI_TIOCA
-        tristate "SGI TIO chipset AGP support"
-        depends on AGP && (IA64_SGI_SN2 || IA64_GENERIC)
-        help
-          This option gives you AGP GART support for the SGI TIO chipset
-          for IA64 processors.
-
 config INTEL_GTT
 	tristate
 	depends on X86 && PCI
drivers/char/agp/Makefile +0 -1
index 4a786ffd9dee..cb2497d157f6 100644
@@ -16,7 +16,6 @@ obj-$(CONFIG_AGP_I460)		+= i460-agp.o
 obj-$(CONFIG_AGP_INTEL)		+= intel-agp.o
 obj-$(CONFIG_INTEL_GTT)		+= intel-gtt.o
 obj-$(CONFIG_AGP_NVIDIA)	+= nvidia-agp.o
-obj-$(CONFIG_AGP_SGI_TIOCA)	+= sgi-agp.o
 obj-$(CONFIG_AGP_SIS)		+= sis-agp.o
 obj-$(CONFIG_AGP_SWORKS)	+= sworks-agp.o
 obj-$(CONFIG_AGP_UNINORTH)	+= uninorth-agp.o
drivers/char/agp/sgi-agp.c deleted +0 -331

331 lines not on this page · raw message

Signature · 1 line
2.20.1
#4 lore raw

PATCH 4/29 ide: remove the sgiioc4 driver

In reply to Christoph Hellwig

The SGI SN2 support is about to be removed. Remove this driver that depends on the SN2 support.

---
 arch/ia64/configs/generic_defconfig   |   1 -
 arch/ia64/configs/gensparse_defconfig |   1 -
 drivers/Kconfig                       |   2 -
 drivers/ide/Kconfig                   |   9 -
 drivers/ide/Makefile                  |   1 -
 drivers/ide/sgiioc4.c                 | 630 --------------------------
 6 files changed, 644 deletions(-)
 delete mode 100644 drivers/ide/sgiioc4.c
arch/ia64/configs/generic_defconfig +0 -1
index 79b88384c885..a41afb3ef209 100644
@@ -51,7 +51,6 @@ CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_GENERIC=y
 CONFIG_BLK_DEV_CMD64X=y
 CONFIG_BLK_DEV_PIIX=y
-CONFIG_BLK_DEV_SGIIOC4=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
 CONFIG_BLK_DEV_SR=m
arch/ia64/configs/gensparse_defconfig +0 -1
index f1490580ed69..07484aa6f16f 100644
@@ -44,7 +44,6 @@ CONFIG_IDE_GENERIC=y
 CONFIG_BLK_DEV_GENERIC=y
 CONFIG_BLK_DEV_CMD64X=y
 CONFIG_BLK_DEV_PIIX=y
-CONFIG_BLK_DEV_SGIIOC4=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
drivers/Kconfig +0 -2
index 61cf4ea2c229..477d63d0364d 100644
@@ -30,8 +30,6 @@ source "drivers/block/Kconfig"
 
 source "drivers/nvme/Kconfig"
 
-# misc before ide - BLK_DEV_SGIIOC4 depends on SGI_IOC4
-
 source "drivers/misc/Kconfig"
 
 source "drivers/ide/Kconfig"
drivers/ide/Kconfig +0 -9
index 9eada392df15..1c227ea8ecd3 100644
@@ -567,15 +567,6 @@ config BLK_DEV_SVWKS
 	  This driver adds PIO/(U)DMA support for the ServerWorks OSB4/CSB5
 	  chipsets.
 
-config BLK_DEV_SGIIOC4
-	tristate "Silicon Graphics IOC4 chipset ATA/ATAPI support"
-	depends on (IA64_SGI_SN2 || IA64_GENERIC) && SGI_IOC4
-	select BLK_DEV_IDEDMA_PCI
-	help
-	  This driver adds PIO & MultiMode DMA-2 support for the SGI IOC4
-	  chipset, which has one channel and can support two devices.
-	  Please say Y here if you have an Altix System from SGI.
-
 config BLK_DEV_SIIMAGE
 	tristate "Silicon Image chipset support"
 	select BLK_DEV_IDEDMA_PCI
drivers/ide/Makefile +0 -1
index 9f617a77970f..cac02db4098d 100644
@@ -59,7 +59,6 @@ obj-$(CONFIG_BLK_DEV_PDC202XX_NEW)	+= pdc202xx_new.o
 obj-$(CONFIG_BLK_DEV_PIIX)		+= piix.o
 obj-$(CONFIG_BLK_DEV_RZ1000)		+= rz1000.o
 obj-$(CONFIG_BLK_DEV_SVWKS)		+= serverworks.o
-obj-$(CONFIG_BLK_DEV_SGIIOC4)		+= sgiioc4.o
 obj-$(CONFIG_BLK_DEV_SIIMAGE)		+= siimage.o
 obj-$(CONFIG_BLK_DEV_SIS5513)		+= sis5513.o
 obj-$(CONFIG_BLK_DEV_SL82C105)		+= sl82c105.o
drivers/ide/sgiioc4.c deleted +0 -627

627 lines not on this page · raw message

Signature · 1 line
2.20.1
#5 lore raw

PATCH 5/29 PCI/hotplug: remove the sgi_hotplug driver

In reply to Christoph Hellwig

The SGI SN2 support is about to be removed. Remove this driver that depends on the SN2 support.

---
 drivers/pci/hotplug/Kconfig       |   9 -
 drivers/pci/hotplug/Makefile      |   1 -
 drivers/pci/hotplug/sgi_hotplug.c | 700 ------------------------------
 3 files changed, 710 deletions(-)
 delete mode 100644 drivers/pci/hotplug/sgi_hotplug.c
drivers/pci/hotplug/Kconfig +0 -9
index e9f78eb390d2..e7b493c22bf3 100644
@@ -147,15 +147,6 @@ config HOTPLUG_PCI_RPA_DLPAR
 
 	  When in doubt, say N.
 
-config HOTPLUG_PCI_SGI
-	tristate "SGI PCI Hotplug Support"
-	depends on IA64_SGI_SN2 || IA64_GENERIC
-	help
-	  Say Y here if you want to use the SGI Altix Hotplug
-	  Driver for PCI devices.
-
-	  When in doubt, say N.
-
 config HOTPLUG_PCI_S390
 	bool "System z PCI Hotplug Support"
 	depends on S390 && 64BIT
drivers/pci/hotplug/Makefile +0 -1
index 7e3331603714..5196983220df 100644
@@ -18,7 +18,6 @@ obj-$(CONFIG_HOTPLUG_PCI_SHPC)		+= shpchp.o
 obj-$(CONFIG_HOTPLUG_PCI_POWERNV)	+= pnv-php.o
 obj-$(CONFIG_HOTPLUG_PCI_RPA)		+= rpaphp.o
 obj-$(CONFIG_HOTPLUG_PCI_RPA_DLPAR)	+= rpadlpar_io.o
-obj-$(CONFIG_HOTPLUG_PCI_SGI)		+= sgi_hotplug.o
 obj-$(CONFIG_HOTPLUG_PCI_ACPI)		+= acpiphp.o
 obj-$(CONFIG_HOTPLUG_PCI_S390)		+= s390_pci_hpc.o
 
drivers/pci/hotplug/sgi_hotplug.c deleted +0 -700

700 lines not on this page · raw message

Signature · 1 line
2.20.1
#6 lore raw

PATCH 6/29 tty/serial: remove the sn_console driver

In reply to Christoph Hellwig

The SGI SN2 support is about to be removed. Remove this driver that depends on the SN2 support.

---
 arch/ia64/configs/generic_defconfig   |    1 -
 arch/ia64/configs/gensparse_defconfig |    1 -
 arch/ia64/kernel/setup.c              |    7 -
 drivers/tty/serial/Kconfig            |   10 -
 drivers/tty/serial/Makefile           |    1 -
 drivers/tty/serial/sn_console.c       | 1036 -------------------------
 6 files changed, 1056 deletions(-)
 delete mode 100644 drivers/tty/serial/sn_console.c
arch/ia64/configs/generic_defconfig +0 -1
index a41afb3ef209..62698ea5d3f2 100644
@@ -94,7 +94,6 @@ CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=6
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_SGI_L1_CONSOLE=y
 CONFIG_SERIAL_SGI_IOC4=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_EFI_RTC=y
arch/ia64/configs/gensparse_defconfig +0 -1
index 07484aa6f16f..b910318f2348 100644
@@ -83,7 +83,6 @@ CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=6
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_SGI_L1_CONSOLE=y
 CONFIG_SERIAL_SGI_IOC4=y
 CONFIG_SERIAL_SGI_IOC3=y
 # CONFIG_HW_RANDOM is not set
arch/ia64/kernel/setup.c +0 -7
index c9cfa760cd57..a0480a4e65c1 100644
@@ -463,13 +463,6 @@ early_console_setup (char *cmdline)
 {
 	int earlycons = 0;
 
-#ifdef CONFIG_SERIAL_SGI_L1_CONSOLE
-	{
-		extern int sn_serial_console_early_setup(void);
-		if (!sn_serial_console_early_setup())
-			earlycons++;
-	}
-#endif
 #ifdef CONFIG_EFI_PCDP
 	if (!efi_setup_pcdp_console(cmdline))
 		earlycons++;
drivers/tty/serial/Kconfig +0 -10
index 3083dbae35f7..e9930af78acc 100644
@@ -855,16 +855,6 @@ config SERIAL_CPM_CONSOLE
 	  your boot loader (lilo or loadlin) about how to pass options to the
 	  kernel at boot time.)
 
-config SERIAL_SGI_L1_CONSOLE
-	bool "SGI Altix L1 serial console support"
-	depends on IA64_GENERIC || IA64_SGI_SN2
-	select SERIAL_CORE
-	select SERIAL_CORE_CONSOLE
-	help
-		If you have an SGI Altix and you would like to use the system
-		controller serial port as your console (you want this!),
-		say Y.  Otherwise, say N.
-
 config SERIAL_PIC32
 	tristate "Microchip PIC32 serial support"
 	depends on MACH_PIC32
drivers/tty/serial/Makefile +0 -1
index 15a0fccadf7e..caa978980a6e 100644
@@ -41,7 +41,6 @@ obj-$(CONFIG_SERIAL_HS_LPC32XX) += lpc32xx_hs.o
 obj-$(CONFIG_SERIAL_DZ) += dz.o
 obj-$(CONFIG_SERIAL_ZS) += zs.o
 obj-$(CONFIG_SERIAL_SH_SCI) += sh-sci.o
-obj-$(CONFIG_SERIAL_SGI_L1_CONSOLE) += sn_console.o
 obj-$(CONFIG_SERIAL_CPM) += cpm_uart/
 obj-$(CONFIG_SERIAL_IMX) += imx.o
 obj-$(CONFIG_SERIAL_MPC52xx) += mpc52xx_uart.o
drivers/tty/serial/sn_console.c deleted +0 -1030

1,030 lines not on this page · raw message

Signature · 1 line
2.20.1
#7 lore raw

PATCH 7/29 tty/serial: remove the ioc4_serial driver

In reply to Christoph Hellwig

The SGI SN2 support is about to be removed. Remove this driver that depends on the SN2 support.

---
 arch/ia64/configs/generic_defconfig   |    1 -
 arch/ia64/configs/gensparse_defconfig |    1 -
 drivers/tty/serial/Kconfig            |    9 -
 drivers/tty/serial/Makefile           |    1 -
 drivers/tty/serial/ioc4_serial.c      | 2955 -------------------------
 5 files changed, 2967 deletions(-)
 delete mode 100644 drivers/tty/serial/ioc4_serial.c
arch/ia64/configs/generic_defconfig +0 -1
index 62698ea5d3f2..8dd921dce4b5 100644
@@ -94,7 +94,6 @@ CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=6
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_SGI_IOC4=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_EFI_RTC=y
 CONFIG_RAW_DRIVER=m
arch/ia64/configs/gensparse_defconfig +0 -1
index b910318f2348..6e450a4fc93e 100644
@@ -83,7 +83,6 @@ CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=6
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_SGI_IOC4=y
 CONFIG_SERIAL_SGI_IOC3=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_EFI_RTC=y
drivers/tty/serial/Kconfig +0 -9
index e9930af78acc..d33bd894b9f2 100644
@@ -972,15 +972,6 @@ config SERIAL_JSM
 	  To compile this driver as a module, choose M here: the
 	  module will be called jsm.
 
-config SERIAL_SGI_IOC4
-	tristate "SGI IOC4 controller serial support"
-	depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC4
-	select SERIAL_CORE
-	help
-		If you have an SGI Altix with an IOC4 based Base IO card
-		and wish to use the serial ports on this card, say Y.
-		Otherwise, say N.
-
 config SERIAL_SGI_IOC3
 	tristate "SGI Altix IOC3 serial support"
 	depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC3
drivers/tty/serial/Makefile +0 -1
index caa978980a6e..df8f9a8f7651 100644
@@ -52,7 +52,6 @@ obj-$(CONFIG_SERIAL_SC16IS7XX_CORE) += sc16is7xx.o
 obj-$(CONFIG_SERIAL_JSM) += jsm/
 obj-$(CONFIG_SERIAL_TXX9) += serial_txx9.o
 obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o
-obj-$(CONFIG_SERIAL_SGI_IOC4) += ioc4_serial.o
 obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o
 obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
 obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
drivers/tty/serial/ioc4_serial.c deleted +0 -2952

2,952 lines not on this page · raw message

Signature · 1 line
2.20.1
#8 lore raw

PATCH 8/29 tty/serial: remove the ioc3_serial driver

In reply to Christoph Hellwig

The SGI SN2 support is about to be removed. Remove this driver that depends on the SN2 support.

---
 MAINTAINERS                           |    6 -
 arch/ia64/configs/gensparse_defconfig |    1 -
 drivers/tty/serial/Kconfig            |    8 -
 drivers/tty/serial/Makefile           |    1 -
 drivers/tty/serial/ioc3_serial.c      | 2195 -------------------------
 5 files changed, 2211 deletions(-)
 delete mode 100644 drivers/tty/serial/ioc3_serial.c
MAINTAINERS +0 -6
index 47800d32cfbc..80079a9c4440 100644
@@ -8399,12 +8399,6 @@ L:	[email protected]
 S:	Maintained
 F:	drivers/net/ethernet/sgi/ioc3-eth.c
 
-IOC3 SERIAL DRIVER
-M:	Pat Gefre <[email protected]>
-L:	[email protected]
-S:	Maintained
-F:	drivers/tty/serial/ioc3_serial.c
-
 IOMAP FILESYSTEM LIBRARY
 M:	Christoph Hellwig <[email protected]>
 M:	Darrick J. Wong <[email protected]>
arch/ia64/configs/gensparse_defconfig +0 -1
index 6e450a4fc93e..d82d07d060d6 100644
@@ -83,7 +83,6 @@ CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=6
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_SGI_IOC3=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_EFI_RTC=y
 CONFIG_RAW_DRIVER=m
drivers/tty/serial/Kconfig +0 -8
index d33bd894b9f2..2f631501c75f 100644
@@ -972,14 +972,6 @@ config SERIAL_JSM
 	  To compile this driver as a module, choose M here: the
 	  module will be called jsm.
 
-config SERIAL_SGI_IOC3
-	tristate "SGI Altix IOC3 serial support"
-	depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC3
-	select SERIAL_CORE
-	help
-	  If you have an SGI Altix with an IOC3 serial card,
-	  say Y or M.  Otherwise, say N.
-
 config SERIAL_MSM
 	tristate "MSM on-chip serial port support"
 	depends on ARCH_QCOM
drivers/tty/serial/Makefile +0 -1
index df8f9a8f7651..d2f44879384e 100644
@@ -52,7 +52,6 @@ obj-$(CONFIG_SERIAL_SC16IS7XX_CORE) += sc16is7xx.o
 obj-$(CONFIG_SERIAL_JSM) += jsm/
 obj-$(CONFIG_SERIAL_TXX9) += serial_txx9.o
 obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o
-obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o
 obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
 obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
 obj-$(CONFIG_SERIAL_MSM) += msm_serial.o
drivers/tty/serial/ioc3_serial.c deleted +0 -2193

2,193 lines not on this page · raw message

Signature · 1 line
2.20.1
#9 lore raw

PATCH 9/29 char/mspec: remove SGI SN2 support

In reply to Christoph Hellwig

The SGI SN2 support is about to be removed, so drops the bits specific to it from this driver.

---
 drivers/char/mspec.c | 155 +++----------------------------------------
 1 file changed, 11 insertions(+), 144 deletions(-)
drivers/char/mspec.c +11 -144
index e75c9df7c2d8..a9d9f074fbd6 100644
@@ -9,11 +9,8 @@
  *
  * This driver exports the SN special memory (mspec) facility to user
  * processes.
- * There are three types of memory made available thru this driver:
- * fetchops, uncached and cached.
- *
- * Fetchops are atomic memory operations that are implemented in the
- * memory controller on SGI SN hardware.
+ * There are two types of memory made available thru this driver:
+ * uncached and cached.
  *
  * Uncached are used for memory write combining feature of the ia64
  * cpu.
@@ -46,16 +43,8 @@
 #include <linux/atomic.h>
 #include <asm/tlbflush.h>
 #include <asm/uncached.h>
-#include <asm/sn/addrs.h>
-#include <asm/sn/arch.h>
-#include <asm/sn/mspec.h>
-#include <asm/sn/sn_cpuid.h>
-#include <asm/sn/io.h>
-#include <asm/sn/bte.h>
-#include <asm/sn/shubio.h>
 
 
-#define FETCHOP_ID	"SGI Fetchop,"
 #define CACHED_ID	"Cached,"
 #define UNCACHED_ID	"Uncached"
 #define REVISION	"4.0"
@@ -65,17 +54,10 @@
  * Page types allocated by the device.
  */
 enum mspec_page_type {
-	MSPEC_FETCHOP = 1,
-	MSPEC_CACHED,
+	MSPEC_CACHED = 2,
 	MSPEC_UNCACHED
 };
 
-#ifdef CONFIG_SGI_SN
-static int is_sn2;
-#else
-#define is_sn2		0
-#endif
-
 /*
  * One of these structures is allocated when an mspec region is mmaped. The
  * structure is pointed to by the vma->vm_private_data field in the vma struct.
@@ -96,39 +78,6 @@ struct vma_data {
 	unsigned long maddr[0];	/* Array of MSPEC addresses. */
 };
 
-/* used on shub2 to clear FOP cache in the HUB */
-static unsigned long scratch_page[MAX_NUMNODES];
-#define SH2_AMO_CACHE_ENTRIES	4
-
-static inline int
-mspec_zero_block(unsigned long addr, int len)
-{
-	int status;
-
-	if (is_sn2) {
-		if (is_shub2()) {
-			int nid;
-			void *p;
-			int i;
-
-			nid = nasid_to_cnodeid(get_node_number(__pa(addr)));
-			p = (void *)TO_AMO(scratch_page[nid]);
-
-			for (i=0; i < SH2_AMO_CACHE_ENTRIES; i++) {
-				FETCHOP_LOAD_OP(p, FETCHOP_LOAD);
-				p += FETCHOP_VAR_SIZE;
-			}
-		}
-
-		status = bte_copy(0, addr & ~__IA64_UNCACHED_OFFSET, len,
-				  BTE_WACQUIRE | BTE_ZERO_FILL, NULL);
-	} else {
-		memset((char *) addr, 0, len);
-		status = 0;
-	}
-	return status;
-}
-
 /*
  * mspec_open
  *
@@ -173,11 +122,8 @@ mspec_close(struct vm_area_struct *vma)
 		 */
 		my_page = vdata->maddr[index];
 		vdata->maddr[index] = 0;
-		if (!mspec_zero_block(my_page, PAGE_SIZE))
-			uncached_free_page(my_page, 1);
-		else
-			printk(KERN_WARNING "mspec_close(): "
-			       "failed to zero page %ld\n", my_page);
+		memset((char *)my_page, 0, PAGE_SIZE);
+		uncached_free_page(my_page, 1);
 	}
 
 	kvfree(vdata);
@@ -213,11 +159,7 @@ mspec_fault(struct vm_fault *vmf)
 		spin_unlock(&vdata->lock);
 	}
 
-	if (vdata->type = MSPEC_FETCHOP)
-		paddr = TO_AMO(maddr);
-	else
-		paddr = maddr & ~__IA64_UNCACHED_OFFSET;
-
+	paddr = maddr & ~__IA64_UNCACHED_OFFSET;
 	pfn = paddr >> PAGE_SHIFT;
 
 	return vmf_insert_pfn(vmf->vma, vmf->address, pfn);
@@ -269,19 +211,13 @@ mspec_mmap(struct file *file, struct vm_area_struct *vma,
 	vma->vm_private_data = vdata;
 
 	vma->vm_flags |= VM_IO | VM_PFNMAP | VM_DONTEXPAND | VM_DONTDUMP;
-	if (vdata->type = MSPEC_FETCHOP || vdata->type = MSPEC_UNCACHED)
+	if (vdata->type = MSPEC_UNCACHED)
 		vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
 	vma->vm_ops = &mspec_vm_ops;
 
 	return 0;
 }
 
-static int
-fetchop_mmap(struct file *file, struct vm_area_struct *vma)
-{
-	return mspec_mmap(file, vma, MSPEC_FETCHOP);
-}
-
 static int
 cached_mmap(struct file *file, struct vm_area_struct *vma)
 {
@@ -294,18 +230,6 @@ uncached_mmap(struct file *file, struct vm_area_struct *vma)
 	return mspec_mmap(file, vma, MSPEC_UNCACHED);
 }
 
-static const struct file_operations fetchop_fops = {
-	.owner = THIS_MODULE,
-	.mmap = fetchop_mmap,
-	.llseek = noop_llseek,
-};
-
-static struct miscdevice fetchop_miscdev = {
-	.minor = MISC_DYNAMIC_MINOR,
-	.name = "sgi_fetchop",
-	.fops = &fetchop_fops
-};
-
 static const struct file_operations cached_fops = {
 	.owner = THIS_MODULE,
 	.mmap = cached_mmap,
@@ -339,89 +263,32 @@ static int __init
 mspec_init(void)
 {
 	int ret;
-	int nid;
-
-	/*
-	 * The fetchop device only works on SN2 hardware, uncached and cached
-	 * memory drivers should both be valid on all ia64 hardware
-	 */
-#ifdef CONFIG_SGI_SN
-	if (ia64_platform_is("sn2")) {
-		is_sn2 = 1;
-		if (is_shub2()) {
-			ret = -ENOMEM;
-			for_each_node_state(nid, N_ONLINE) {
-				int actual_nid;
-				int nasid;
-				unsigned long phys;
-
-				scratch_page[nid] = uncached_alloc_page(nid, 1);
-				if (scratch_page[nid] = 0)
-					goto free_scratch_pages;
-				phys = __pa(scratch_page[nid]);
-				nasid = get_node_number(phys);
-				actual_nid = nasid_to_cnodeid(nasid);
-				if (actual_nid != nid)
-					goto free_scratch_pages;
-			}
-		}
 
-		ret = misc_register(&fetchop_miscdev);
-		if (ret) {
-			printk(KERN_ERR
-			       "%s: failed to register device %i\n",
-			       FETCHOP_ID, ret);
-			goto free_scratch_pages;
-		}
-	}
-#endif
 	ret = misc_register(&cached_miscdev);
 	if (ret) {
 		printk(KERN_ERR "%s: failed to register device %i\n",
 		       CACHED_ID, ret);
-		if (is_sn2)
-			misc_deregister(&fetchop_miscdev);
-		goto free_scratch_pages;
+		return ret;
 	}
 	ret = misc_register(&uncached_miscdev);
 	if (ret) {
 		printk(KERN_ERR "%s: failed to register device %i\n",
 		       UNCACHED_ID, ret);
 		misc_deregister(&cached_miscdev);
-		if (is_sn2)
-			misc_deregister(&fetchop_miscdev);
-		goto free_scratch_pages;
+		return ret;
 	}
 
-	printk(KERN_INFO "%s %s initialized devices: %s %s %s\n",
-	       MSPEC_BASENAME, REVISION, is_sn2 ? FETCHOP_ID : "",
-	       CACHED_ID, UNCACHED_ID);
+	printk(KERN_INFO "%s %s initialized devices: %s %s\n",
+	       MSPEC_BASENAME, REVISION, CACHED_ID, UNCACHED_ID);
 
 	return 0;
-
- free_scratch_pages:
-	for_each_node(nid) {
-		if (scratch_page[nid] != 0)
-			uncached_free_page(scratch_page[nid], 1);
-	}
-	return ret;
 }
 
 static void __exit
 mspec_exit(void)
 {
-	int nid;
-
 	misc_deregister(&uncached_miscdev);
 	misc_deregister(&cached_miscdev);
-	if (is_sn2) {
-		misc_deregister(&fetchop_miscdev);
-
-		for_each_node(nid) {
-			if (scratch_page[nid] != 0)
-				uncached_free_page(scratch_page[nid], 1);
-		}
-	}
 }
 
 module_init(mspec_init);
Signature · 1 line
2.20.1
#10 lore raw

PATCH 10/29 misc/sgi-xp: remove SGI SN2 support

In reply to Christoph Hellwig

Note this also marks xp broken on ia64 now, as the UV support, which was disable in generic kernels before actually never compiled due to undefined uv_gpa_to_soc_phys_ram and uv_gpa_in_mmr_space symbols since at least commit c2c9f1157414 ("x86: uv: update XPC to handle updated BIOS interface").

---
 arch/ia64/uv/kernel/setup.c         |    4 -
 drivers/misc/Kconfig                |    5 +-
 drivers/misc/sgi-xp/Makefile        |   13 +-
 drivers/misc/sgi-xp/xp.h            |   19 -
 drivers/misc/sgi-xp/xp_main.c       |    8 +-
 drivers/misc/sgi-xp/xp_nofault.S    |   35 -
 drivers/misc/sgi-xp/xp_sn2.c        |  190 ---
 drivers/misc/sgi-xp/xp_uv.c         |    3 +-
 drivers/misc/sgi-xp/xpc.h           |  273 ---
 drivers/misc/sgi-xp/xpc_main.c      |   31 +-
 drivers/misc/sgi-xp/xpc_partition.c |    5 -
 drivers/misc/sgi-xp/xpc_sn2.c       | 2459 ---------------------------
 drivers/misc/sgi-xp/xpc_uv.c        |    2 +
 drivers/misc/sgi-xp/xpnet.c         |    2 +-
 14 files changed, 15 insertions(+), 3034 deletions(-)
 delete mode 100644 drivers/misc/sgi-xp/xp_nofault.S
 delete mode 100644 drivers/misc/sgi-xp/xp_sn2.c
 delete mode 100644 drivers/misc/sgi-xp/xpc_sn2.c
arch/ia64/uv/kernel/setup.c +0 -4
index f1490657bafc..32d6ea2e89f8 100644
@@ -19,12 +19,8 @@ EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info);
 
 #ifdef CONFIG_IA64_SGI_UV
 int sn_prom_type;
-long sn_partition_id;
-EXPORT_SYMBOL(sn_partition_id);
 long sn_coherency_id;
 EXPORT_SYMBOL_GPL(sn_coherency_id);
-long sn_region_size;
-EXPORT_SYMBOL(sn_region_size);
 #endif
 
 struct redir_addr {
drivers/misc/Kconfig +2 -3
index 6abfc8e92fcc..299032693934 100644
@@ -200,9 +200,8 @@ config ENCLOSURE_SERVICES
 config SGI_XP
 	tristate "Support communication between SGI SSIs"
 	depends on NET
-	depends on (IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || X86_UV) && SMP
-	select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
-	select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
+	depends on (IA64_GENERIC || IA64_SGI_UV || X86_UV) && SMP
+	depends on X86_64 || BROKEN
 	select SGI_GRU if X86_64 && SMP
 	---help---
 	  An SGI machine can be divided into multiple Single System
drivers/misc/sgi-xp/Makefile +3 -10
index bbb622c19c06..34c55a4045af 100644
@@ -4,17 +4,10 @@
 #
 
 obj-$(CONFIG_SGI_XP)		+= xp.o
-xp-y				:= xp_main.o
-xp-$(CONFIG_IA64_SGI_SN2)	+= xp_sn2.o xp_nofault.o
-xp-$(CONFIG_IA64_GENERIC)	+= xp_sn2.o xp_nofault.o
-xp-$(CONFIG_IA64_SGI_UV)	+= xp_uv.o
-xp-$(CONFIG_X86_64)		+= xp_uv.o
+xp-y				:= xp_main.o xp_uv.o
 
 obj-$(CONFIG_SGI_XP)		+= xpc.o
-xpc-y				:= xpc_main.o xpc_channel.o xpc_partition.o
-xpc-$(CONFIG_IA64_SGI_SN2)	+= xpc_sn2.o
-xpc-$(CONFIG_IA64_GENERIC)	+= xpc_sn2.o
-xpc-$(CONFIG_IA64_SGI_UV) 	+= xpc_uv.o
-xpc-$(CONFIG_X86_64)		+= xpc_uv.o
+xpc-y				:= xpc_main.o xpc_channel.o xpc_partition.o \
+				   xpc_uv.o
 
 obj-$(CONFIG_SGI_XP)		+= xpnet.o
drivers/misc/sgi-xp/xp.h +0 -19
index b8069eec18cb..06469b12aced 100644
@@ -24,23 +24,6 @@
 #define is_uv()		0
 #endif
 
-#if defined CONFIG_IA64
-#include <asm/sn/arch.h>	/* defines is_shub1() and is_shub2() */
-#define is_shub()	ia64_platform_is("sn2")
-#endif
-
-#ifndef is_shub1
-#define is_shub1()	0
-#endif
-
-#ifndef is_shub2
-#define is_shub2()	0
-#endif
-
-#ifndef is_shub
-#define is_shub()	0
-#endif
-
 #ifdef USE_DBUG_ON
 #define DBUG_ON(condition)	BUG_ON(condition)
 #else
@@ -360,9 +343,7 @@ extern int xp_nofault_PIOR(void *);
 extern int xp_error_PIOR(void);
 
 extern struct device *xp;
-extern enum xp_retval xp_init_sn2(void);
 extern enum xp_retval xp_init_uv(void);
-extern void xp_exit_sn2(void);
 extern void xp_exit_uv(void);
 
 #endif /* _DRIVERS_MISC_SGIXP_XP_H */
drivers/misc/sgi-xp/xp_main.c +2 -6
index 6d7f557fd1c1..5fd94d836070 100644
@@ -233,9 +233,7 @@ xp_init(void)
 	for (ch_number = 0; ch_number < XPC_MAX_NCHANNELS; ch_number++)
 		mutex_init(&xpc_registrations[ch_number].mutex);
 
-	if (is_shub())
-		ret = xp_init_sn2();
-	else if (is_uv())
+	if (is_uv())
 		ret = xp_init_uv();
 	else
 		ret = 0;
@@ -251,9 +249,7 @@ module_init(xp_init);
 void __exit
 xp_exit(void)
 {
-	if (is_shub())
-		xp_exit_sn2();
-	else if (is_uv())
+	if (is_uv())
 		xp_exit_uv();
 }
 
drivers/misc/sgi-xp/xp_nofault.S deleted +0 -35
deleted file mode 100644
index e38d43319429..000000000000
@@ -1,35 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2004-2008 Silicon Graphics, Inc.  All Rights Reserved.
- */
-
-/*
- * The xp_nofault_PIOR function takes a pointer to a remote PIO register
- * and attempts to load and consume a value from it.  This function
- * will be registered as a nofault code block.  In the event that the
- * PIO read fails, the MCA handler will force the error to look
- * corrected and vector to the xp_error_PIOR which will return an error.
- *
- * The definition of "consumption" and the time it takes for an MCA
- * to surface is processor implementation specific.  This code
- * is sufficient on Itanium through the Montvale processor family.
- * It may need to be adjusted for future processor implementations.
- *
- *	extern int xp_nofault_PIOR(void *remote_register);
- */
-
-	.global xp_nofault_PIOR
-xp_nofault_PIOR:
-	mov	r8=r0			// Stage a success return value
-	ld8.acq	r9=[r32];;		// PIO Read the specified register
-	adds	r9=1,r9;;		// Add to force consumption
-	srlz.i;;			// Allow time for MCA to surface
-	br.ret.sptk.many b0;;		// Return success
-
-	.global xp_error_PIOR
-xp_error_PIOR:
-	mov	r8=1			// Return value of 1
-	br.ret.sptk.many b0;;		// Return failure
drivers/misc/sgi-xp/xp_sn2.c deleted +0 -190

190 lines not on this page · raw message

drivers/misc/sgi-xp/xp_uv.c +2 -1
index a0d093274dc0..5e335e93459c 100644
@@ -151,9 +151,10 @@ xp_init_uv(void)
 	BUG_ON(!is_uv());
 
 	xp_max_npartitions = XP_MAX_NPARTITIONS_UV;
+#ifdef CONFIG_X86
 	xp_partition_id = sn_partition_id;
 	xp_region_size = sn_region_size;
-
+#endif
 	xp_pa = xp_pa_uv;
 	xp_socket_pa = xp_socket_pa_uv;
 	xp_remote_memcpy = xp_remote_memcpy_uv;
drivers/misc/sgi-xp/xpc.h +0 -273

357 lines not on this page · raw message

drivers/misc/sgi-xp/xpc_main.c +3 -28
index 83fc748a91a7..79a963105983 100644
@@ -279,13 +279,6 @@ xpc_hb_checker(void *ignore)
 
 			dev_dbg(xpc_part, "checking remote heartbeats\n");
 			xpc_check_remote_hb();
-
-			/*
-			 * On sn2 we need to periodically recheck to ensure no
-			 * IRQ/amo pairs have been missed.
-			 */
-			if (is_shub())
-				force_IRQ = 1;
 		}
 
 		/* check for outstanding IRQs */
@@ -1050,9 +1043,7 @@ xpc_do_exit(enum xp_retval reason)
 
 	xpc_teardown_partitions();
 
-	if (is_shub())
-		xpc_exit_sn2();
-	else if (is_uv())
+	if (is_uv())
 		xpc_exit_uv();
 }
 
@@ -1235,21 +1226,7 @@ xpc_init(void)
 	dev_set_name(xpc_part, "part");
 	dev_set_name(xpc_chan, "chan");
 
-	if (is_shub()) {
-		/*
-		 * The ia64-sn2 architecture supports at most 64 partitions.
-		 * And the inability to unregister remote amos restricts us
-		 * further to only support exactly 64 partitions on this
-		 * architecture, no less.
-		 */
-		if (xp_max_npartitions != 64) {
-			dev_err(xpc_part, "max #of partitions not set to 64\n");
-			ret = -EINVAL;
-		} else {
-			ret = xpc_init_sn2();
-		}
-
-	} else if (is_uv()) {
+	if (is_uv()) {
 		ret = xpc_init_uv();
 
 	} else {
@@ -1335,9 +1312,7 @@ xpc_init(void)
 
 	xpc_teardown_partitions();
 out_1:
-	if (is_shub())
-		xpc_exit_sn2();
-	else if (is_uv())
+	if (is_uv())
 		xpc_exit_uv();
 	return ret;
 }
drivers/misc/sgi-xp/xpc_partition.c +0 -5
index 782ce95d3f17..21a04bc97d40 100644
@@ -93,10 +93,6 @@ xpc_get_rsvd_page_pa(int nasid)
 		if (ret != xpNeedMoreInfo)
 			break;
 
-		/* !!! L1_CACHE_ALIGN() is only a sn2-bte_copy requirement */
-		if (is_shub())
-			len = L1_CACHE_ALIGN(len);
-
 		if (len > buf_len) {
 			kfree(buf_base);
 			buf_len = L1_CACHE_ALIGN(len);
@@ -452,7 +448,6 @@ xpc_discovery(void)
 		case 32:
 			max_regions *= 2;
 			region_size = 16;
-			DBUG_ON(!is_shub2());
 		}
 	}
 
drivers/misc/sgi-xp/xpc_sn2.c deleted +0 -2459

2,240 lines not on this page · raw message

drivers/misc/sgi-xp/xpc_uv.c +2 -0
index 0c6de97dd347..d8a6fe16e4f5 100644

Lines of this file are not shown. View the raw message.

drivers/misc/sgi-xp/xpnet.c +1 -1
index 44d750d98bc8..f7d610a22347 100644

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

Signature · 1 line
2.20.1

Part of the diff is not shown here. View the raw message.

#11 lore raw

PATCH 11/29 qla1280: remove SGI SN2 support

In reply to Christoph Hellwig

The SGI SN2 support is about to be removed, so drops the bits specific to it from this driver.

---
 drivers/scsi/qla1280.c | 37 -------------------------------------
 drivers/scsi/qla1280.h |  3 ---
 2 files changed, 40 deletions(-)
drivers/scsi/qla1280.c +0 -31
index e5760c4a27f0..832af4213046 100644
@@ -357,10 +357,6 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_tcq.h>
 
-#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2)
-#include <asm/sn/io.h>
-#endif
-
 
 /*
  * Compile time Options:
@@ -380,11 +376,6 @@
 
 #define NVRAM_DELAY()			udelay(500)	/* 2 microseconds */
 
-#if defined(__ia64__) && !defined(ia64_platform_is)
-#define ia64_platform_is(foo)		(!strcmp(x, platform_name))
-#endif
-
-
 #define IS_ISP1040(ha) (ha->pdev->device = PCI_DEVICE_ID_QLOGIC_ISP1020)
 #define IS_ISP1x40(ha) (ha->pdev->device = PCI_DEVICE_ID_QLOGIC_ISP1020 || \
 			ha->pdev->device = PCI_DEVICE_ID_QLOGIC_ISP1240)
@@ -1427,15 +1418,6 @@ qla1280_initialize_adapter(struct scsi_qla_host *ha)
 	ha->flags.reset_active = 0;
 	ha->flags.abort_isp_active = 0;
 
-#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2)
-	if (ia64_platform_is("sn2")) {
-		printk(KERN_INFO "scsi(%li): Enabling SN2 PCI DMA "
-		       "dual channel lockup workaround\n", ha->host_no);
-		ha->flags.use_pci_vchannel = 1;
-		driver_setup.no_nvram = 1;
-	}
-#endif
-
 	/* TODO: implement support for the 1040 nvram format */
 	if (IS_ISP1040(ha))
 		driver_setup.no_nvram = 1;
@@ -2251,13 +2233,6 @@ qla1280_nvram_config(struct scsi_qla_host *ha)
 	mb[1] = nv->firmware_feature.f.enable_fast_posting;
 	mb[1] |= nv->firmware_feature.f.report_lvd_bus_transition << 1;
 	mb[1] |= nv->firmware_feature.f.disable_synchronous_backoff << 5;
-#if defined(CONFIG_IA64_GENERIC) || defined (CONFIG_IA64_SGI_SN2)
-	if (ia64_platform_is("sn2")) {
-		printk(KERN_INFO "scsi(%li): Enabling SN2 PCI DMA "
-		       "workaround\n", ha->host_no);
-		mb[1] |= nv->firmware_feature.f.unused_9 << 9; /* XXX */
-	}
-#endif
 	status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);
 
 	/* Retry count and delay. */
@@ -2888,12 +2863,6 @@ qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
 				break;
 
 			dma_handle = sg_dma_address(s);
-#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2)
-			if (ha->flags.use_pci_vchannel)
-				sn_pci_set_vchan(ha->pdev,
-						 (unsigned long *)&dma_handle,
-						 SCSI_BUS_32(cmd));
-#endif
 			*dword_ptr++  				cpu_to_le32(lower_32_bits(dma_handle));
 			*dword_ptr++ @@ -2950,12 +2919,6 @@ qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
 				if (cnt = 5)

break;
dma_handle = sg_dma_address(s);
-#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2)
- if (ha->flags.use_pci_vchannel)
- sn_pci_set_vchan(ha->pdev,
- (unsigned long *)&dma_handle,
- SCSI_BUS_32(cmd));
-#endif
*dword_ptr++ cpu_to_le32(lower_32_bits(dma_handle));
*dword_ptr++ diff --git a/drivers/scsi/qla1280.h b/drivers/scsi/qla1280.h
index b496206362a9..a1a8aefc7cc3 100644

drivers/scsi/qla1280.h +0 -3
@@ -1055,9 +1055,6 @@ struct scsi_qla_host {
 		uint32_t reset_active:1;		/* 3 */
 		uint32_t abort_isp_active:1;		/* 4 */
 		uint32_t disable_risc_code_load:1;	/* 5 */
-#ifdef __ia64__
-		uint32_t use_pci_vchannel:1;
-#endif
 	} flags;
 
 	struct nvram nvram;
Signature · 1 line
2.20.1
#12 lore raw

PATCH 12/29 qla2xxx: remove SGI SN2 support

In reply to Christoph Hellwig

The SGI SN2 support is about to be removed, so drops the bits specific to it from this driver.

---
 drivers/scsi/qla2xxx/qla_init.c | 14 --------------
 1 file changed, 14 deletions(-)
drivers/scsi/qla2xxx/qla_init.c +0 -14
index da83034d4759..d4c3baec9172 100644
@@ -4575,20 +4575,6 @@ qla2x00_nvram_config(scsi_qla_host_t *vha)
 		rval = 1;
 	}
 
-#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2)
-	/*
-	 * The SN2 does not provide BIOS emulation which means you can't change
-	 * potentially bogus BIOS settings. Force the use of default settings
-	 * for link rate and frame size.  Hope that the rest of the settings
-	 * are valid.
-	 */
-	if (ia64_platform_is("sn2")) {
-		nv->frame_payload_size = 2048;
-		if (IS_QLA23XX(ha))
-			nv->special_options[1] = BIT_7;
-	}
-#endif
-
 	/* Reset Initialization control block */
 	memset(icb, 0, ha->init_cb_size);
 
Signature · 1 line
2.20.1
#13 lore raw

PATCH 13/29 drivers: remove the SGI SN2 IOC3 base support

In reply to Christoph Hellwig

The IOC3 is a multi-function chip seen on SGI SN2 and some SGI MIPS systems. This removes the last bit of SN2 specific support, while the bits used by the mips ports are still around (and being substantially rewritten at the moment).

---
 arch/ia64/Kconfig                     |   2 -
 arch/ia64/configs/gensparse_defconfig |   1 -
 drivers/Makefile                      |   1 -
 drivers/sn/Kconfig                    |  22 -
 drivers/sn/Makefile                   |   7 -
 drivers/sn/ioc3.c                     | 844 --------------------------
 6 files changed, 877 deletions(-)
 delete mode 100644 drivers/sn/Kconfig
 delete mode 100644 drivers/sn/Makefile
 delete mode 100644 drivers/sn/ioc3.c
arch/ia64/Kconfig +0 -2
index 7468d8e50467..43f3a3076ab2 100644
@@ -493,8 +493,6 @@ config IA64_HP_AML_NFW
 	  the "force" module parameter, e.g., with the "aml_nfw.force"
 	  kernel command line option.
 
-source "drivers/sn/Kconfig"
-
 config KEXEC
 	bool "kexec system call"
 	depends on !IA64_HP_SIM && (!SMP || HOTPLUG_CPU)
arch/ia64/configs/gensparse_defconfig +0 -1
index d82d07d060d6..5d5ea744f7e6 100644
@@ -19,7 +19,6 @@ CONFIG_SPARSEMEM_MANUAL=y
 CONFIG_IA64_MCA_RECOVERY=y
 CONFIG_PERFMON=y
 CONFIG_IA64_PALINFO=y
-CONFIG_SGI_IOC3=y
 CONFIG_EFI_VARS=y
 CONFIG_BINFMT_MISC=m
 CONFIG_ACPI_BUTTON=m
drivers/Makefile +0 -1
index 6d37564e783c..05be8c798c51 100644
@@ -132,7 +132,6 @@ obj-y				+= mmc/
 obj-$(CONFIG_MEMSTICK)		+= memstick/
 obj-$(CONFIG_NEW_LEDS)		+= leds/
 obj-$(CONFIG_INFINIBAND)	+= infiniband/
-obj-$(CONFIG_SGI_SN)		+= sn/
 obj-y				+= firmware/
 obj-$(CONFIG_CRYPTO)		+= crypto/
 obj-$(CONFIG_SUPERH)		+= sh/
drivers/sn/Kconfig deleted +0 -22
deleted file mode 100644
index a6c443d31a3c..000000000000
@@ -1,22 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Miscellaneous SN-specific devices
-#
-
-menu "SN Devices"
-	depends on SGI_SN
-
-config SGI_IOC3
-	tristate "SGI IOC3 Base IO support"
-	default m
-	---help---
-	This option enables basic support for the SGI IOC3-based Base IO
-	controller card.  This option does not enable any specific
-	functions on such a card, but provides necessary infrastructure
-	for other drivers to utilize.
-
-	If you have an SGI Altix with an IOC3-based
-	I/O controller or a PCI IOC3 serial card say Y.
-	Otherwise say N.
-
-endmenu
drivers/sn/Makefile deleted +0 -7
deleted file mode 100644
index f0e809a38b2d..000000000000
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for the Altix device drivers.
-#
-#
-
-obj-$(CONFIG_SGI_IOC3) += ioc3.o
drivers/sn/ioc3.c deleted +0 -844

844 lines not on this page · raw message

Signature · 1 line
2.20.1
#14 lore raw

PATCH 14/29 drivers: remove the SGI SN2 IOC4 base support

In reply to Christoph Hellwig

The IOC4 is a multi-function chip seen on SGI SN2 and some SGI MIPS systems. This removes the base driver, which while not having an SN2 Kconfig dependency was only for sub-drivers that had one.

---
 Documentation/driver-api/sgi-ioc4.rst    |  49 ---
 arch/ia64/configs/generic_defconfig      |   1 -
 arch/ia64/configs/gensparse_defconfig    |   1 -
 arch/mips/configs/bigsur_defconfig       |   1 -
 arch/mips/configs/ip32_defconfig         |   1 -
 arch/mips/configs/markeins_defconfig     |   1 -
 arch/mips/configs/rm200_defconfig        |   1 -
 arch/mips/configs/sb1250_swarm_defconfig |   1 -
 drivers/misc/Kconfig                     |  12 -
 drivers/misc/Makefile                    |   1 -
 drivers/misc/ioc4.c                      | 498 -----------------------
 include/linux/ioc4.h                     | 184 ---------
 include/linux/pci_ids.h                  |   1 -
 13 files changed, 752 deletions(-)
 delete mode 100644 Documentation/driver-api/sgi-ioc4.rst
 delete mode 100644 drivers/misc/ioc4.c
 delete mode 100644 include/linux/ioc4.h
Documentation/driver-api/sgi-ioc4.rst deleted +0 -47
deleted file mode 100644
index 72709222d3c0..000000000000
@@ -1,49 +0,0 @@
-==================
-SGI IOC4 PCI (multi function) device
-==================
-
-The SGI IOC4 PCI device is a bit of a strange beast, so some notes on
-it are in order.
-
-First, even though the IOC4 performs multiple functions, such as an
-IDE controller, a serial controller, a PS/2 keyboard/mouse controller,
-and an external interrupt mechanism, it's not implemented as a
-multifunction device.  The consequence of this from a software
-standpoint is that all these functions share a single IRQ, and
-they can't all register to own the same PCI device ID.  To make
-matters a bit worse, some of the register blocks (and even registers
-themselves) present in IOC4 are mixed-purpose between these several
-functions, meaning that there's no clear "owning" device driver.
-
-The solution is to organize the IOC4 driver into several independent
-drivers, "ioc4", "sgiioc4", and "ioc4_serial".  Note that there is no
-PS/2 controller driver as this functionality has never been wired up
-on a shipping IO card.
-
-ioc4
-==
-This is the core (or shim) driver for IOC4.  It is responsible for
-initializing the basic functionality of the chip, and allocating
-the PCI resources that are shared between the IOC4 functions.
-
-This driver also provides registration functions that the other
-IOC4 drivers can call to make their presence known.  Each driver
-needs to provide a probe and remove function, which are invoked
-by the core driver at appropriate times.  The interface of these
-IOC4 function probe and remove operations isn't precisely the same
-as PCI device probe and remove operations, but is logically the
-same operation.
-
-sgiioc4
-===-This is the IDE driver for IOC4.  Its name isn't very descriptive
-simply for historical reasons (it used to be the only IOC4 driver
-component).  There's not much to say about it other than it hooks
-up to the ioc4 driver via the appropriate registration, probe, and
-remove functions.
-
-ioc4_serial
-=====-This is the serial driver for IOC4.  There's not much to say about it
-other than it hooks up to the ioc4 driver via the appropriate registration,
-probe, and remove functions.
arch/ia64/configs/generic_defconfig +0 -1
index 8dd921dce4b5..661d90b3e148 100644
@@ -44,7 +44,6 @@ CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
-CONFIG_SGI_IOC4=y
 CONFIG_SGI_XP=m
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDECD=y
arch/ia64/configs/gensparse_defconfig +0 -1
index 5d5ea744f7e6..7844e6a956a4 100644
@@ -36,7 +36,6 @@ CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
-CONFIG_SGI_IOC4=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_IDE_GENERIC=y
arch/mips/configs/bigsur_defconfig +0 -1
index 66566026409d..f14ad0538f4e 100644
@@ -103,7 +103,6 @@ CONFIG_FW_LOADER=m
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=m
-CONFIG_SGI_IOC4=m
 CONFIG_EEPROM_LEGACY=y
 CONFIG_EEPROM_MAX6875=y
 CONFIG_IDE=y
arch/mips/configs/ip32_defconfig +0 -1
index 572cab91670c..370884018aad 100644
@@ -46,7 +46,6 @@ CONFIG_CONNECTOR=y
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=m
-CONFIG_SGI_IOC4=y
 CONFIG_RAID_ATTRS=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
arch/mips/configs/markeins_defconfig +0 -1
index ae93a94f8c71..507ad91b21e7 100644
@@ -117,7 +117,6 @@ CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_SGI_IOC4=m
 CONFIG_SCSI=m
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=m
arch/mips/configs/rm200_defconfig +0 -1
index 0f4b09f8a0ee..8762e75f5d5f 100644
@@ -198,7 +198,6 @@ CONFIG_BLK_DEV_SX8=m
 CONFIG_BLK_DEV_RAM=m
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
-CONFIG_SGI_IOC4=m
 CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
arch/mips/configs/sb1250_swarm_defconfig +0 -1
index 6883ea4477d4..bb0b1b22ebe1 100644
@@ -49,7 +49,6 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE’20
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
-CONFIG_SGI_IOC4=m
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDETAPE=y
drivers/misc/Kconfig +0 -12
index 299032693934..423d2d26d8f7 100644
@@ -126,18 +126,6 @@ config INTEL_MID_PTI
 	  an Intel Atom (non-netbook) mobile device containing a MIPI
 	  P1149.7 standard implementation.
 
-config SGI_IOC4
-	tristate "SGI IOC4 Base IO support"
-	depends on PCI
-	---help---
-	  This option enables basic support for the IOC4 chip on certain
-	  SGI IO controller cards (IO9, IO10, and PCI-RT).  This option
-	  does not enable any specific functions on such a card, but provides
-	  necessary infrastructure for other drivers to utilize.
-
-	  If you have an SGI Altix with an IOC4-based card say Y.
-	  Otherwise say N.
-
 config TIFM_CORE
 	tristate "TI Flash Media interface support"
 	depends on PCI
drivers/misc/Makefile +0 -1
index abd8ae249746..8dae0a976200 100644
@@ -21,7 +21,6 @@ obj-$(CONFIG_QCOM_COINCELL)	+= qcom-coincell.o
 obj-$(CONFIG_QCOM_FASTRPC)	+= fastrpc.o
 obj-$(CONFIG_SENSORS_BH1770)	+= bh1770glc.o
 obj-$(CONFIG_SENSORS_APDS990X)	+= apds990x.o
-obj-$(CONFIG_SGI_IOC4)		+= ioc4.o
 obj-$(CONFIG_ENCLOSURE_SERVICES) += enclosure.o
 obj-$(CONFIG_KGDB_TESTS)	+= kgdbts.o
 obj-$(CONFIG_SGI_XP)		+= sgi-xp/
drivers/misc/ioc4.c deleted +0 -498

498 lines not on this page · raw message

include/linux/ioc4.h deleted +0 -184

184 lines not on this page · raw message

include/linux/pci_ids.h +0 -1
index c842735a4f45..85e2ca611d42 100644
@@ -1070,7 +1070,6 @@
 #define PCI_VENDOR_ID_SGI		0x10a9
 #define PCI_DEVICE_ID_SGI_IOC3		0x0003
 #define PCI_DEVICE_ID_SGI_LITHIUM	0x1002
-#define PCI_DEVICE_ID_SGI_IOC4		0x100a
 
 #define PCI_VENDOR_ID_WINBOND		0x10ad
 #define PCI_DEVICE_ID_WINBOND_82C105	0x0105
Signature · 1 line
2.20.1
#15 lore raw

PATCH 16/29 ia64: remove now unused machvec indirections

In reply to Christoph Hellwig

With the SGI SN2 machvec removal most of the indirections are unused now, so remove them. This includes the entire removal of the mmio read*/write* macros as the generic ones are identical to the asm-generic/io.h version.

---
 arch/ia64/include/asm/hw_irq.h       |  22 +--
 arch/ia64/include/asm/io.h           | 221 ++++--------------------
 arch/ia64/include/asm/machvec.h      | 241 ---------------------------
 arch/ia64/include/asm/machvec_init.h |  24 ---
 arch/ia64/include/asm/mmiowb.h       |  12 +-
 arch/ia64/include/asm/pci.h          |   6 +-
 arch/ia64/include/asm/switch_to.h    |   1 -
 arch/ia64/kernel/iosapic.c           |   5 +-
 arch/ia64/kernel/irq.c               |  12 --
 arch/ia64/kernel/irq_ia64.c          |   2 +-
 arch/ia64/kernel/machine_kexec.c     |   1 -
 arch/ia64/kernel/machvec.c           |   7 -
 arch/ia64/kernel/mca.c               |  10 +-
 arch/ia64/kernel/msi_ia64.c          |  21 +--
 arch/ia64/kernel/sal.c               |   2 +-
 arch/ia64/kernel/setup.c             |   1 -
 arch/ia64/kernel/smp.c               |   8 +-
 arch/ia64/kernel/smpboot.c           |   2 +-
 arch/ia64/kernel/time.c              |   2 -
 arch/ia64/lib/io.c                   | 114 -------------
 arch/ia64/mm/discontig.c             |   3 +-
 arch/ia64/mm/tlb.c                   |   4 +-
 arch/ia64/pci/pci.c                  |  13 +-
 23 files changed, 65 insertions(+), 669 deletions(-)
arch/ia64/include/asm/hw_irq.h +3 -19
index 5dd3c6485c3a..12808111a767 100644
@@ -137,25 +137,9 @@ static inline void irq_complete_move(unsigned int irq) {}
 
 static inline void ia64_native_resend_irq(unsigned int vector)
 {
-	platform_send_ipi(smp_processor_id(), vector, IA64_IPI_DM_INT, 0);
+	ia64_send_ipi(smp_processor_id(), vector, IA64_IPI_DM_INT, 0);
 }
 
-/*
- * Default implementations for the irq-descriptor API:
- */
-#ifndef CONFIG_IA64_GENERIC
-static inline ia64_vector __ia64_irq_to_vector(int irq)
-{
-	return irq_cfg[irq].vector;
-}
-
-static inline unsigned int
-__ia64_local_vector_to_irq (ia64_vector vec)
-{
-	return __this_cpu_read(vector_irq[vec]);
-}
-#endif
-
 /*
  * Next follows the irq descriptor interface.  On IA-64, each CPU supports 256 interrupt
  * vectors.  On smaller systems, there is a one-to-one correspondence between interrupt
@@ -170,7 +154,7 @@ __ia64_local_vector_to_irq (ia64_vector vec)
 static inline ia64_vector
 irq_to_vector (int irq)
 {
-	return platform_irq_to_vector(irq);
+	return irq_cfg[irq].vector;
 }
 
 /*
@@ -181,7 +165,7 @@ irq_to_vector (int irq)
 static inline unsigned int
 local_vector_to_irq (ia64_vector vec)
 {
-	return platform_local_vector_to_irq(vec);
+	return __this_cpu_read(vector_irq[vec]);
 }
 
 #endif /* _ASM_IA64_HW_IRQ_H */
arch/ia64/include/asm/io.h +33 -188

305 lines not on this page · raw message

arch/ia64/include/asm/machvec.h +0 -241

301 lines not on this page · raw message

arch/ia64/include/asm/machvec_init.h +0 -24
index 2aafb69a3787..7a82e3ea0aff 100644
@@ -2,30 +2,6 @@
 #include <asm/iommu.h>
 #include <asm/machvec.h>
 
-extern ia64_mv_send_ipi_t ia64_send_ipi;
-extern ia64_mv_global_tlb_purge_t ia64_global_tlb_purge;
-extern ia64_mv_irq_to_vector __ia64_irq_to_vector;
-extern ia64_mv_local_vector_to_irq __ia64_local_vector_to_irq;
-extern ia64_mv_pci_get_legacy_mem_t ia64_pci_get_legacy_mem;
-extern ia64_mv_pci_legacy_read_t ia64_pci_legacy_read;
-extern ia64_mv_pci_legacy_write_t ia64_pci_legacy_write;
-
-extern ia64_mv_inb_t __ia64_inb;
-extern ia64_mv_inw_t __ia64_inw;
-extern ia64_mv_inl_t __ia64_inl;
-extern ia64_mv_outb_t __ia64_outb;
-extern ia64_mv_outw_t __ia64_outw;
-extern ia64_mv_outl_t __ia64_outl;
-extern ia64_mv_mmiowb_t __ia64_mmiowb;
-extern ia64_mv_readb_t __ia64_readb;
-extern ia64_mv_readw_t __ia64_readw;
-extern ia64_mv_readl_t __ia64_readl;
-extern ia64_mv_readq_t __ia64_readq;
-extern ia64_mv_readb_t __ia64_readb_relaxed;
-extern ia64_mv_readw_t __ia64_readw_relaxed;
-extern ia64_mv_readl_t __ia64_readl_relaxed;
-extern ia64_mv_readq_t __ia64_readq_relaxed;
-
 #define MACHVEC_HELPER(name)									\
  struct ia64_machine_vector machvec_##name __attribute__ ((unused, __section__ (".machvec")))	\
 	= MACHVEC_INIT(name);
arch/ia64/include/asm/mmiowb.h +2 -10
index 297b85ac84a0..d67aab4ea3b4 100644
@@ -3,22 +3,14 @@
 #ifndef _ASM_IA64_MMIOWB_H
 #define _ASM_IA64_MMIOWB_H
 
-#include <asm/machvec.h>
-
 /**
- * ___ia64_mmiowb - I/O write barrier
+ * mmiowb - I/O write barrier
  *
  * Ensure ordering of I/O space writes.  This will make sure that writes
  * following the barrier will arrive after all previous writes.  For most
  * ia64 platforms, this is a simple 'mf.a' instruction.
  */
-static inline void ___ia64_mmiowb(void)
-{
-	ia64_mfa();
-}
-
-#define __ia64_mmiowb	___ia64_mmiowb
-#define mmiowb()	platform_mmiowb()
+#define mmiowb()	ia64_mfa()
 
 #include <asm-generic/mmiowb.h>
 
arch/ia64/include/asm/pci.h +3 -3
index 780e8744ba85..ef91b780a3f2 100644
@@ -39,9 +39,9 @@ extern int pci_mmap_legacy_page_range(struct pci_bus *bus,
 				      struct vm_area_struct *vma,
 				      enum pci_mmap_state mmap_state);
 
-#define pci_get_legacy_mem platform_pci_get_legacy_mem
-#define pci_legacy_read platform_pci_legacy_read
-#define pci_legacy_write platform_pci_legacy_write
+char *pci_get_legacy_mem(struct pci_bus *bus);
+int pci_legacy_read(struct pci_bus *bus, u16 port, u32 *val, u8 size);
+int pci_legacy_write(struct pci_bus *bus, u16 port, u32 val, u8 size);
 
 struct pci_controller {
 	struct acpi_device *companion;
arch/ia64/include/asm/switch_to.h +0 -1
index b10f31ec522c..9011e90a6b97 100644
@@ -69,7 +69,6 @@ extern void ia64_load_extra (struct task_struct *task);
 	if (unlikely((current->thread.flags & IA64_THREAD_MIGRATION) &&	       \
 		     (task_cpu(current) !=				       \
 		      		      task_thread_info(current)->last_cpu))) { \
-		platform_migrate(current);				       \
 		task_thread_info(current)->last_cpu = task_cpu(current);       \
 	}								       \
 } while (0)
arch/ia64/kernel/iosapic.c +1 -4
index fe6e4946672e..9e49fd006859 100644
@@ -67,10 +67,7 @@
  *     used as architecture-independent interrupt handling mechanism in Linux.
  *     As an IRQ is a number, we have to have
  *     IA-64 interrupt vector number <-> IRQ number mapping.  On smaller
- *     systems, we use one-to-one mapping between IA-64 vector and IRQ.  A
- *     platform can implement platform_irq_to_vector(irq) and
- *     platform_local_vector_to_irq(vector) APIs to differentiate the mapping.
- *     Please see also arch/ia64/include/asm/hw_irq.h for those APIs.
+ *     systems, we use one-to-one mapping between IA-64 vector and IRQ.
  *
  * To sum up, there are three levels of mappings involved:
  *
arch/ia64/kernel/irq.c +0 -12
index 6d17d26caf98..0a8e5e585edc 100644
@@ -35,18 +35,6 @@ void ack_bad_irq(unsigned int irq)
 	printk(KERN_ERR "Unexpected irq vector 0x%x on CPU %u!\n", irq, smp_processor_id());
 }
 
-#ifdef CONFIG_IA64_GENERIC
-ia64_vector __ia64_irq_to_vector(int irq)
-{
-	return irq_cfg[irq].vector;
-}
-
-unsigned int __ia64_local_vector_to_irq (ia64_vector vec)
-{
-	return __this_cpu_read(vector_irq[vec]);
-}
-#endif
-
 /*
  * Interrupt statistics:
  */
arch/ia64/kernel/irq_ia64.c +1 -1
index ab87d6c25b15..1c81ec752b04 100644
@@ -314,7 +314,7 @@ void irq_complete_move(unsigned irq)
 	cpumask_and(&cleanup_mask, &cfg->old_domain, cpu_online_mask);
 	cfg->move_cleanup_count = cpumask_weight(&cleanup_mask);
 	for_each_cpu(i, &cleanup_mask)
-		platform_send_ipi(i, IA64_IRQ_MOVE_VECTOR, IA64_IPI_DM_INT, 0);
+		ia64_send_ipi(i, IA64_IRQ_MOVE_VECTOR, IA64_IPI_DM_INT, 0);
 	cfg->move_in_progress = 0;
 }
 
arch/ia64/kernel/machine_kexec.c +0 -1
index 3b1dd5496d08..efc9b568401c 100644
@@ -127,7 +127,6 @@ static void ia64_machine_kexec(struct unw_frame_info *info, void *arg)
 	ia64_srlz_d();
 	while (ia64_get_ivr() != IA64_SPURIOUS_INT_VECTOR)
 		ia64_eoi();
-	platform_kernel_launch_event();
 	rnk = (relocate_new_kernel_t)&code_addr;
 	(*rnk)(image->head, image->start, ia64_boot_param,
 		     GRANULEROUNDDOWN((unsigned long) pal_addr));
arch/ia64/kernel/machvec.c +0 -7
index ebd82535f51b..3db3be7aaae5 100644
@@ -11,7 +11,6 @@
 #include <asm/page.h>
 
 struct ia64_machine_vector ia64_mv = {
-	.mmiowb	= ___ia64_mmiowb
 };
 EXPORT_SYMBOL(ia64_mv);
 
@@ -69,9 +68,3 @@ machvec_setup (char **arg)
 {
 }
 EXPORT_SYMBOL(machvec_setup);
-
-void
-machvec_timer_interrupt (int irq, void *dev_id)
-{
-}
-EXPORT_SYMBOL(machvec_timer_interrupt);
arch/ia64/kernel/mca.c +5 -5
index 79190d877fa7..f72b05fe918b 100644
@@ -744,7 +744,7 @@ ia64_mca_cmc_vector_enable_keventd(struct work_struct *unused)
 static void
 ia64_mca_wakeup(int cpu)
 {
-	platform_send_ipi(cpu, IA64_MCA_WAKEUP_VECTOR, IA64_IPI_DM_INT, 0);
+	ia64_send_ipi(cpu, IA64_MCA_WAKEUP_VECTOR, IA64_IPI_DM_INT, 0);
 }
 
 /*
@@ -1490,7 +1490,7 @@ ia64_mca_cmc_int_caller(int cmc_irq, void *arg)
 	cpuid = cpumask_next(cpuid+1, cpu_online_mask);
 
 	if (cpuid < nr_cpu_ids) {
-		platform_send_ipi(cpuid, IA64_CMCP_VECTOR, IA64_IPI_DM_INT, 0);
+		ia64_send_ipi(cpuid, IA64_CMCP_VECTOR, IA64_IPI_DM_INT, 0);
 	} else {
 		/* If no log record, switch out of polling mode */
 		if (start_count = IA64_LOG_COUNT(SAL_INFO_TYPE_CMC)) {
@@ -1523,7 +1523,7 @@ static void
 ia64_mca_cmc_poll (struct timer_list *unused)
 {
 	/* Trigger a CMC interrupt cascade  */
-	platform_send_ipi(cpumask_first(cpu_online_mask), IA64_CMCP_VECTOR,
+	ia64_send_ipi(cpumask_first(cpu_online_mask), IA64_CMCP_VECTOR,
 							IA64_IPI_DM_INT, 0);
 }
 
@@ -1560,7 +1560,7 @@ ia64_mca_cpe_int_caller(int cpe_irq, void *arg)
 	cpuid = cpumask_next(cpuid+1, cpu_online_mask);
 
 	if (cpuid < NR_CPUS) {
-		platform_send_ipi(cpuid, IA64_CPEP_VECTOR, IA64_IPI_DM_INT, 0);
+		ia64_send_ipi(cpuid, IA64_CPEP_VECTOR, IA64_IPI_DM_INT, 0);
 	} else {
 		/*
 		 * If a log was recorded, increase our polling frequency,
@@ -1600,7 +1600,7 @@ static void
 ia64_mca_cpe_poll (struct timer_list *unused)
 {
 	/* Trigger a CPE interrupt cascade  */
-	platform_send_ipi(cpumask_first(cpu_online_mask), IA64_CPEP_VECTOR,
+	ia64_send_ipi(cpumask_first(cpu_online_mask), IA64_CPEP_VECTOR,
 							IA64_IPI_DM_INT, 0);
 }
 
arch/ia64/kernel/msi_ia64.c +2 -19
index 519d9432f407..df5c28f252e3 100644
@@ -43,7 +43,7 @@ static int ia64_set_msi_irq_affinity(struct irq_data *idata,
 }
 #endif /* CONFIG_SMP */
 
-int ia64_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
+int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 {
 	struct msi_msg	msg;
 	unsigned long	dest_phys_id;
@@ -77,7 +77,7 @@ int ia64_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 	return 0;
 }
 
-void ia64_teardown_msi_irq(unsigned int irq)
+void arch_teardown_msi_irq(unsigned int irq)
 {
 	destroy_irq(irq);
 }
@@ -111,23 +111,6 @@ static struct irq_chip ia64_msi_chip = {
 	.irq_retrigger		= ia64_msi_retrigger_irq,
 };
 
-
-int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
-{
-	if (platform_setup_msi_irq)
-		return platform_setup_msi_irq(pdev, desc);
-
-	return ia64_setup_msi_irq(pdev, desc);
-}
-
-void arch_teardown_msi_irq(unsigned int irq)
-{
-	if (platform_teardown_msi_irq)
-		return platform_teardown_msi_irq(irq);
-
-	return ia64_teardown_msi_irq(irq);
-}
-
 #ifdef CONFIG_INTEL_IOMMU
 #ifdef CONFIG_SMP
 static int dmar_msi_set_affinity(struct irq_data *data,
arch/ia64/kernel/sal.c +1 -1
index 17085a8078fe..c455ece977ad 100644
@@ -249,7 +249,7 @@ check_sal_cache_flush (void)
 	 * Send ourselves a timer interrupt, wait until it's reported, and see
 	 * if SAL_CACHE_FLUSH drops it.
 	 */
-	platform_send_ipi(cpu, IA64_TIMER_VECTOR, IA64_IPI_DM_INT, 0);
+	ia64_send_ipi(cpu, IA64_TIMER_VECTOR, IA64_IPI_DM_INT, 0);
 
 	while (!ia64_get_irr(IA64_TIMER_VECTOR))
 		cpu_relax();
arch/ia64/kernel/setup.c +0 -1
index 78d0d22dd17e..4dc74500eac5 100644
@@ -1039,7 +1039,6 @@ cpu_init (void)
 		ia64_patch_phys_stack_reg(num_phys_stacked*8 + 8);
 		max_num_phys_stacked = num_phys_stacked;
 	}
-	platform_cpu_init();
 }
 
 void __init
arch/ia64/kernel/smp.c +4 -4
index 133b63355814..4825b0b41d49 100644
@@ -146,7 +146,7 @@ static inline void
 send_IPI_single (int dest_cpu, int op)
 {
 	set_bit(op, &per_cpu(ipi_operation, dest_cpu));
-	platform_send_ipi(dest_cpu, IA64_IPI_VECTOR, IA64_IPI_DM_INT, 0);
+	ia64_send_ipi(dest_cpu, IA64_IPI_VECTOR, IA64_IPI_DM_INT, 0);
 }
 
 /*
@@ -213,7 +213,7 @@ kdump_smp_send_init(void)
 	for_each_online_cpu(cpu) {
 		if (cpu != self_cpu) {
 			if(kdump_status[cpu] = 0)
-				platform_send_ipi(cpu, 0, IA64_IPI_DM_INIT, 0);
+				ia64_send_ipi(cpu, 0, IA64_IPI_DM_INIT, 0);
 		}
 	}
 }
@@ -224,7 +224,7 @@ kdump_smp_send_init(void)
 void
 smp_send_reschedule (int cpu)
 {
-	platform_send_ipi(cpu, IA64_IPI_RESCHEDULE, IA64_IPI_DM_INT, 0);
+	ia64_send_ipi(cpu, IA64_IPI_RESCHEDULE, IA64_IPI_DM_INT, 0);
 }
 EXPORT_SYMBOL_GPL(smp_send_reschedule);
 
@@ -234,7 +234,7 @@ EXPORT_SYMBOL_GPL(smp_send_reschedule);
 static void
 smp_send_local_flush_tlb (int cpu)
 {
-	platform_send_ipi(cpu, IA64_IPI_LOCAL_TLB_FLUSH, IA64_IPI_DM_INT, 0);
+	ia64_send_ipi(cpu, IA64_IPI_LOCAL_TLB_FLUSH, IA64_IPI_DM_INT, 0);
 }
 
 void
arch/ia64/kernel/smpboot.c +1 -1
index df56f739dd11..f7058659526c 100644
@@ -467,7 +467,7 @@ do_boot_cpu (int sapicid, int cpu, struct task_struct *idle)
 	Dprintk("Sending wakeup vector %lu to AP 0x%x/0x%x.\n", ap_wakeup_vector, cpu, sapicid);
 
 	set_brendez_area(cpu);
-	platform_send_ipi(cpu, ap_wakeup_vector, IA64_IPI_DM_INT, 0);
+	ia64_send_ipi(cpu, ap_wakeup_vector, IA64_IPI_DM_INT, 0);
 
 	/*
 	 * Wait 10s total for the AP to start
arch/ia64/kernel/time.c +0 -2
index 4ecd81b0e8ec..d9ad93a6d825 100644
@@ -167,8 +167,6 @@ timer_interrupt (int irq, void *dev_id)
 		return IRQ_HANDLED;
 	}
 
-	platform_timer_interrupt(irq, dev_id);
-
 	new_itm = local_cpu_data->itm_next;
 
 	if (!time_after(ia64_get_itc(), new_itm))
arch/ia64/lib/io.c +0 -114

117 lines not on this page · raw message

arch/ia64/mm/discontig.c +1 -2
index 05490dd073e6..921f3efe3538 100644
@@ -396,8 +396,7 @@ static void __meminit scatter_node_data(void)
  *
  * Each node's per-node area has a copy of the global pg_data_t list, so
  * we copy that to each node here, as well as setting the per-cpu pointer
- * to the local node data structure.  The active_cpus field of the per-node
- * structure gets setup by the platform_cpu_init() function later.
+ * to the local node data structure.
  */
 static void __init initialize_pernode_data(void)
 {
arch/ia64/mm/tlb.c +2 -2
index 0714df1b7854..770888f2aa92 100644
@@ -245,7 +245,7 @@ setup_ptcg_sem(int max_purges, int nptcg_from)
 	spinaphore_init(&ptcg_sem, max_purges);
 }
 
-void
+static void
 ia64_global_tlb_purge (struct mm_struct *mm, unsigned long start,
 		       unsigned long end, unsigned long nbits)
 {
@@ -332,7 +332,7 @@ __flush_tlb_range (struct vm_area_struct *vma, unsigned long start,
 	preempt_disable();
 #ifdef CONFIG_SMP
 	if (mm != current->active_mm || cpumask_weight(mm_cpumask(mm)) != 1) {
-		platform_global_tlb_purge(mm, start, end, nbits);
+		ia64_global_tlb_purge(mm, start, end, nbits);
 		preempt_enable();
 		return;
 	}
arch/ia64/pci/pci.c +6 -7
index 165e561dc81a..89c9f36dc94d 100644
@@ -372,7 +372,6 @@ void pcibios_fixup_bus(struct pci_bus *b)
 	}
 	list_for_each_entry(dev, &b->devices, bus_list)
 		pcibios_fixup_device_resources(dev);
-	platform_pci_fixup_bus(b);
 }
 
 void pcibios_add_bus(struct pci_bus *bus)
@@ -413,7 +412,7 @@ pcibios_disable_device (struct pci_dev *dev)
 }
 
 /**
- * ia64_pci_get_legacy_mem - generic legacy mem routine
+ * pci_get_legacy_mem - generic legacy mem routine
  * @bus: bus to get legacy memory base address for
  *
  * Find the base of legacy memory for @bus.  This is typically the first
@@ -424,7 +423,7 @@ pcibios_disable_device (struct pci_dev *dev)
  * This is the ia64 generic version of this routine.  Other platforms
  * are free to override it with a machine vector.
  */
-char *ia64_pci_get_legacy_mem(struct pci_bus *bus)
+char *pci_get_legacy_mem(struct pci_bus *bus)
 {
 	return (char *)__IA64_UNCACHED_OFFSET;
 }
@@ -473,7 +472,7 @@ pci_mmap_legacy_page_range(struct pci_bus *bus, struct vm_area_struct *vma,
 }
 
 /**
- * ia64_pci_legacy_read - read from legacy I/O space
+ * pci_legacy_read - read from legacy I/O space
  * @bus: bus to read
  * @port: legacy port value
  * @val: caller allocated storage for returned value
@@ -485,7 +484,7 @@ pci_mmap_legacy_page_range(struct pci_bus *bus, struct vm_area_struct *vma,
  * overridden by the platform.  This is necessary on platforms that don't
  * support legacy I/O routing or that hard fail on legacy I/O timeouts.
  */
-int ia64_pci_legacy_read(struct pci_bus *bus, u16 port, u32 *val, u8 size)
+int pci_legacy_read(struct pci_bus *bus, u16 port, u32 *val, u8 size)
 {
 	int ret = size;
 
@@ -508,7 +507,7 @@ int ia64_pci_legacy_read(struct pci_bus *bus, u16 port, u32 *val, u8 size)
 }
 
 /**
- * ia64_pci_legacy_write - perform a legacy I/O write
+ * pci_legacy_write - perform a legacy I/O write
  * @bus: bus pointer
  * @port: port to write
  * @val: value to write
@@ -516,7 +515,7 @@ int ia64_pci_legacy_read(struct pci_bus *bus, u16 port, u32 *val, u8 size)
  *
  * Simply writes @size bytes of @val to @port.
  */
-int ia64_pci_legacy_write(struct pci_bus *bus, u16 port, u32 val, u8 size)
+int pci_legacy_write(struct pci_bus *bus, u16 port, u32 val, u8 size)
 {
 	int ret = size;
 
Signature · 1 line
2.20.1
#16 lore raw

PATCH 17/29 ia64: remove the hpsim platform

In reply to Christoph Hellwig

The hpsim platform supports the HP IA64 simulator which was useful as a bring up platform. But it is fairly non-standard vs real IA64 system in that it for example doesn't support ACPI. It also comes with a whole bunch of simulator specific drivers. Remove it to simplify the IA64 port.

---
 arch/ia64/Kconfig                     |  34 +-
 arch/ia64/Makefile                    |  15 +-
 arch/ia64/configs/sim_defconfig       |  52 ---
 arch/ia64/hp/sim/Kconfig              |  23 --
 arch/ia64/hp/sim/Makefile             |  17 -
 arch/ia64/hp/sim/boot/Makefile        |  37 --
 arch/ia64/hp/sim/boot/boot_head.S     | 165 --------
 arch/ia64/hp/sim/boot/bootloader.c    | 175 ---------
 arch/ia64/hp/sim/boot/bootloader.lds  |  67 ----
 arch/ia64/hp/sim/boot/fw-emu.c        | 374 ------------------
 arch/ia64/hp/sim/boot/ssc.h           |  36 --
 arch/ia64/hp/sim/hpsim.S              |  11 -
 arch/ia64/hp/sim/hpsim_console.c      |  77 ----
 arch/ia64/hp/sim/hpsim_irq.c          |  76 ----
 arch/ia64/hp/sim/hpsim_machvec.c      |   3 -
 arch/ia64/hp/sim/hpsim_setup.c        |  41 --
 arch/ia64/hp/sim/hpsim_ssc.h          |  37 --
 arch/ia64/hp/sim/simeth.c             | 510 -------------------------
 arch/ia64/hp/sim/simscsi.c            | 373 ------------------
 arch/ia64/hp/sim/simserial.c          | 521 --------------------------
 arch/ia64/include/asm/acpi.h          |   4 +-
 arch/ia64/include/asm/hpsim.h         |  17 -
 arch/ia64/include/asm/iosapic.h       |  12 -
 arch/ia64/include/asm/machvec.h       |  11 +-
 arch/ia64/include/asm/machvec_hpsim.h |  19 -
 arch/ia64/kernel/Makefile             |   3 +-
 arch/ia64/kernel/irq_ia64.c           |   2 -
 arch/ia64/kernel/setup.c              |  13 +-
 28 files changed, 15 insertions(+), 2710 deletions(-)
 delete mode 100644 arch/ia64/configs/sim_defconfig
 delete mode 100644 arch/ia64/hp/sim/Kconfig
 delete mode 100644 arch/ia64/hp/sim/Makefile
 delete mode 100644 arch/ia64/hp/sim/boot/Makefile
 delete mode 100644 arch/ia64/hp/sim/boot/boot_head.S
 delete mode 100644 arch/ia64/hp/sim/boot/bootloader.c
 delete mode 100644 arch/ia64/hp/sim/boot/bootloader.lds
 delete mode 100644 arch/ia64/hp/sim/boot/fw-emu.c
 delete mode 100644 arch/ia64/hp/sim/boot/ssc.h
 delete mode 100644 arch/ia64/hp/sim/hpsim.S
 delete mode 100644 arch/ia64/hp/sim/hpsim_console.c
 delete mode 100644 arch/ia64/hp/sim/hpsim_irq.c
 delete mode 100644 arch/ia64/hp/sim/hpsim_machvec.c
 delete mode 100644 arch/ia64/hp/sim/hpsim_setup.c
 delete mode 100644 arch/ia64/hp/sim/hpsim_ssc.h
 delete mode 100644 arch/ia64/hp/sim/simeth.c
 delete mode 100644 arch/ia64/hp/sim/simscsi.c
 delete mode 100644 arch/ia64/hp/sim/simserial.c
 delete mode 100644 arch/ia64/include/asm/hpsim.h
 delete mode 100644 arch/ia64/include/asm/machvec_hpsim.h
arch/ia64/Kconfig +7 -27
index ae3aca14506e..63db7a5378ac 100644
@@ -10,11 +10,11 @@ config IA64
 	bool
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select ARCH_MIGHT_HAVE_PC_SERIO
-	select ACPI if (!IA64_HP_SIM)
-	select ARCH_SUPPORTS_ACPI if (!IA64_HP_SIM)
+	select ACPI
+	select ARCH_SUPPORTS_ACPI
 	select ACPI_SYSTEM_POWER_STATES_SUPPORT if ACPI
 	select ARCH_MIGHT_HAVE_ACPI_PDC if ACPI
-	select FORCE_PCI if (!IA64_HP_SIM)
+	select FORCE_PCI
 	select PCI_DOMAINS if PCI
 	select PCI_SYSCALL if PCI
 	select HAVE_UNSTABLE_SCHED_CLOCK
@@ -140,7 +140,6 @@ config IA64_GENERIC
 	  HP-zx1/sx1000		For HP systems
 	  HP-zx1/sx1000+swiotlb	For HP systems with (broken) DMA-constrained devices.
 	  SGI-UV		For SGI UV systems
-	  Ski-simulator		For the HP simulator <http://www.hpl.hp.com/research/linux/ski/>
 
 	  If you don't know what to do, choose "generic".
 
@@ -181,11 +180,6 @@ config IA64_SGI_UV
 	  to select this option.  If in doubt, select ia64 generic support
 	  instead.
 
-config IA64_HP_SIM
-	bool "Ski-simulator"
-	select SWIOTLB
-	depends on !PM
-
 endchoice
 
 choice
@@ -239,14 +233,7 @@ config IA64_PAGE_SIZE_64KB
 
 endchoice
 
-if IA64_HP_SIM
-config HZ
-	default 32
-endif
-
-if !IA64_HP_SIM
 source "kernel/Kconfig.hz"
-endif
 
 config IA64_BRL_EMU
 	bool
@@ -265,11 +252,6 @@ config IA64_CYCLONE
 	  Say Y here to enable support for IBM EXA Cyclone time source.
 	  If you're unsure, answer N.
 
-config IOSAPIC
-	bool
-	depends on !IA64_HP_SIM
-	default y
-
 config FORCE_MAX_ZONEORDER
 	int "MAX_ORDER (11 - 17)"  if !HUGETLB_PAGE
 	range 11 17  if !HUGETLB_PAGE
@@ -373,7 +355,7 @@ config ARCH_DISCONTIGMEM_DEFAULT
 
 config NUMA
 	bool "NUMA support"
-	depends on !IA64_HP_SIM && !FLATMEM
+	depends on !FLATMEM
 	select ACPI_NUMA if ACPI
 	help
 	  Say Y to compile the kernel to support NUMA (Non-Uniform Memory
@@ -395,7 +377,7 @@ config NODES_SHIFT
 config VIRTUAL_MEM_MAP
 	bool "Virtual mem map"
 	depends on !SPARSEMEM
-	default y if !IA64_HP_SIM
+	default y
 	help
 	  Say Y to compile the kernel with support for a virtual mem map.
 	  This code also only takes effect if a memory hole of greater than
@@ -478,7 +460,7 @@ config IA64_HP_AML_NFW
 
 config KEXEC
 	bool "kexec system call"
-	depends on !IA64_HP_SIM && (!SMP || HOTPLUG_CPU)
+	depends on !SMP || HOTPLUG_CPU
 	select KEXEC_CORE
 	help
 	  kexec is a system call that implements the ability to shutdown your
@@ -496,7 +478,7 @@ config KEXEC
 
 config CRASH_DUMP
 	  bool "kernel crash dumps"
-	  depends on IA64_MCA_RECOVERY && !IA64_HP_SIM && (!SMP || HOTPLUG_CPU)
+	  depends on IA64_MCA_RECOVERY && (!SMP || HOTPLUG_CPU)
 	  help
 	    Generate crash dump after being started by kexec.
 
@@ -518,8 +500,6 @@ endif
 
 endmenu
 
-source "arch/ia64/hp/sim/Kconfig"
-
 config MSPEC
 	tristate "Memory special operations driver"
 	depends on IA64
arch/ia64/Makefile +3 -12
index 0d730b061f72..8f650541d4eb 100644
@@ -52,15 +52,12 @@ core-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += arch/ia64/dig/
 core-$(CONFIG_IA64_SGI_UV)	+= arch/ia64/uv/
 
 drivers-$(CONFIG_PCI)		+= arch/ia64/pci/
-drivers-$(CONFIG_IA64_HP_SIM)	+= arch/ia64/hp/sim/
 drivers-$(CONFIG_IA64_HP_ZX1)	+= arch/ia64/hp/common/ arch/ia64/hp/zx1/
 drivers-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += arch/ia64/hp/common/ arch/ia64/hp/zx1/
-drivers-$(CONFIG_IA64_GENERIC)	+= arch/ia64/hp/common/ arch/ia64/hp/zx1/ arch/ia64/hp/sim/ arch/ia64/uv/
+drivers-$(CONFIG_IA64_GENERIC)	+= arch/ia64/hp/common/ arch/ia64/hp/zx1/ arch/ia64/uv/
 drivers-$(CONFIG_OPROFILE)	+= arch/ia64/oprofile/
 
-boot := arch/ia64/hp/sim/boot
-
-PHONY += boot compressed check
+PHONY += compressed check
 
 all: compressed unwcheck
 
@@ -69,21 +66,16 @@ compressed: vmlinux.gz
 vmlinuz: vmlinux.gz
 
 vmlinux.gz: vmlinux
-	$(Q)$(MAKE) $(build)=$(boot) $@
 
 unwcheck: vmlinux
 	-$(Q)READELF=$(READELF) $(PYTHON) $(srctree)/arch/ia64/scripts/unwcheck.py $<
 
 archclean:
-	$(Q)$(MAKE) $(clean)=$(boot)
 
 archheaders:
 	$(Q)$(MAKE) $(build)=arch/ia64/kernel/syscalls all
 
-CLEAN_FILES += vmlinux.gz bootloader
-
-boot:	lib/lib.a vmlinux
-	$(Q)$(MAKE) $(build)=$(boot) $@
+CLEAN_FILES += vmlinux.gz
 
 install: vmlinux.gz
 	sh $(srctree)/arch/ia64/install.sh $(KERNELRELEASE) $< System.map "$(INSTALL_PATH)"
@@ -91,7 +83,6 @@ install: vmlinux.gz
 define archhelp
   echo '* compressed	- Build compressed kernel image'
   echo '  install	- Install compressed kernel image'
-  echo '  boot		- Build vmlinux and bootloader for Ski simulator'
   echo '* unwcheck	- Check vmlinux for invalid unwind info'
 endef
 
arch/ia64/configs/sim_defconfig deleted +0 -52

52 lines not on this page · raw message

arch/ia64/hp/sim/Kconfig deleted +0 -23
deleted file mode 100644
index 56fb4f1d4f7c..000000000000
@@ -1,23 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-menu "HP Simulator drivers"
-	depends on IA64_HP_SIM || IA64_GENERIC
-
-config HP_SIMETH
-	bool "Simulated Ethernet "
-	depends on NET
-
-config HP_SIMSERIAL
-	bool "Simulated serial driver support"
-	depends on TTY
-
-config HP_SIMSERIAL_CONSOLE
-	bool "Console for HP simulator"
-	depends on HP_SIMSERIAL
-
-config HP_SIMSCSI
-	bool "Simulated SCSI disk"
-	depends on SCSI=y
-
-endmenu
-
arch/ia64/hp/sim/Makefile deleted +0 -17
deleted file mode 100644
index 0224a13d2c5b..000000000000
@@ -1,17 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# ia64/platform/hp/sim/Makefile
-#
-# Copyright (C) 2002 Hewlett-Packard Co.
-#	David Mosberger-Tang <[email protected]>
-# Copyright (C) 1999 Silicon Graphics, Inc.
-# Copyright (C) Srinivasa Thirumalachar ([email protected])
-#
-
-obj-y := hpsim_irq.o hpsim_setup.o hpsim.o
-obj-$(CONFIG_IA64_GENERIC) += hpsim_machvec.o
-
-obj-$(CONFIG_HP_SIMETH)	+= simeth.o
-obj-$(CONFIG_HP_SIMSERIAL) += simserial.o
-obj-$(CONFIG_HP_SIMSERIAL_CONSOLE) += hpsim_console.o
-obj-$(CONFIG_HP_SIMSCSI) += simscsi.o
arch/ia64/hp/sim/boot/Makefile deleted +0 -37
deleted file mode 100644
index df6e9968c845..000000000000
@@ -1,37 +0,0 @@
-#
-# ia64/boot/Makefile
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 1998, 2003 by David Mosberger-Tang <[email protected]>
-#
-
-targets-$(CONFIG_IA64_HP_SIM)  += bootloader
-targets := vmlinux.bin vmlinux.gz $(targets-y)
-
-quiet_cmd_cptotop = LN      $@
-      cmd_cptotop = ln -f $< $@
-
-vmlinux.gz: $(obj)/vmlinux.gz $(addprefix $(obj)/,$(targets-y))
-	$(call cmd,cptotop)
-	@echo '  Kernel: $@ is ready'
-
-boot: bootloader
-
-bootloader: $(obj)/bootloader
-	$(call cmd,cptotop)
-
-$(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE
-	$(call if_changed,gzip)
-
-$(obj)/vmlinux.bin: vmlinux FORCE
-	$(call if_changed,objcopy)
-
-
-LDFLAGS_bootloader = -static -T
-
-$(obj)/bootloader: $(src)/bootloader.lds $(obj)/bootloader.o $(obj)/boot_head.o $(obj)/fw-emu.o \
-                   lib/lib.a arch/ia64/lib/lib.a FORCE
-	$(call if_changed,ld)
arch/ia64/hp/sim/boot/boot_head.S deleted +0 -165

165 lines not on this page · raw message

arch/ia64/hp/sim/boot/bootloader.c deleted +0 -175

175 lines not on this page · raw message

arch/ia64/hp/sim/boot/bootloader.lds deleted +0 -67

67 lines not on this page · raw message

arch/ia64/hp/sim/boot/fw-emu.c deleted +0 -373

373 lines not on this page · raw message

arch/ia64/hp/sim/boot/ssc.h deleted +0 -36
deleted file mode 100644
index 88752c7509e0..000000000000
@@ -1,36 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 1998-2003 Hewlett-Packard Co
- *	David Mosberger-Tang <[email protected]>
- *	Stephane Eranian <[email protected]>
- */
-#ifndef ssc_h
-#define ssc_h
-
-/* Simulator system calls: */
-
-#define SSC_CONSOLE_INIT		20
-#define SSC_GETCHAR			21
-#define SSC_PUTCHAR			31
-#define SSC_OPEN			50
-#define SSC_CLOSE			51
-#define SSC_READ			52
-#define SSC_WRITE			53
-#define SSC_GET_COMPLETION		54
-#define SSC_WAIT_COMPLETION		55
-#define SSC_CONNECT_INTERRUPT		58
-#define SSC_GENERATE_INTERRUPT		59
-#define SSC_SET_PERIODIC_INTERRUPT	60
-#define SSC_GET_RTC			65
-#define SSC_EXIT			66
-#define SSC_LOAD_SYMBOLS		69
-#define SSC_GET_TOD			74
-
-#define SSC_GET_ARGS			75
-
-/*
- * Simulator system call.
- */
-extern long ssc (long arg0, long arg1, long arg2, long arg3, int nr);
-
-#endif /* ssc_h */
arch/ia64/hp/sim/hpsim.S deleted +0 -11
deleted file mode 100644
index 44b4d53e1689..000000000000
@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <asm/asmmacro.h>
-
-/*
- * Simulator system call.
- */
-GLOBAL_ENTRY(ia64_ssc)
-	mov r15=r36
-	break 0x80001
-	br.ret.sptk.many rp
-END(ia64_ssc)
arch/ia64/hp/sim/hpsim_console.c deleted +0 -77

77 lines not on this page · raw message

arch/ia64/hp/sim/hpsim_irq.c deleted +0 -76

76 lines not on this page · raw message

arch/ia64/hp/sim/hpsim_machvec.c deleted +0 -3
deleted file mode 100644
index c21419359185..000000000000
@@ -1,3 +0,0 @@
-#define MACHVEC_PLATFORM_NAME		hpsim
-#define MACHVEC_PLATFORM_HEADER		<asm/machvec_hpsim.h>
-#include <asm/machvec_init.h>
arch/ia64/hp/sim/hpsim_setup.c deleted +0 -41

41 lines not on this page · raw message

arch/ia64/hp/sim/hpsim_ssc.h deleted +0 -37
deleted file mode 100644
index 6fd97a487811..000000000000
@@ -1,37 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Platform dependent support for HP simulator.
- *
- * Copyright (C) 1998, 1999 Hewlett-Packard Co
- * Copyright (C) 1998, 1999 David Mosberger-Tang <[email protected]>
- * Copyright (C) 1999 Vijay Chander <[email protected]>
- */
-#ifndef _IA64_PLATFORM_HPSIM_SSC_H
-#define _IA64_PLATFORM_HPSIM_SSC_H
-
-/* Simulator system calls: */
-
-#define SSC_CONSOLE_INIT		20
-#define SSC_GETCHAR			21
-#define SSC_PUTCHAR			31
-#define SSC_CONNECT_INTERRUPT		58
-#define SSC_GENERATE_INTERRUPT		59
-#define SSC_SET_PERIODIC_INTERRUPT	60
-#define SSC_GET_RTC			65
-#define SSC_EXIT			66
-#define SSC_LOAD_SYMBOLS		69
-#define SSC_GET_TOD			74
-#define SSC_CTL_TRACE			76
-
-#define SSC_NETDEV_PROBE		100
-#define SSC_NETDEV_SEND			101
-#define SSC_NETDEV_RECV			102
-#define SSC_NETDEV_ATTACH		103
-#define SSC_NETDEV_DETACH		104
-
-/*
- * Simulator system call.
- */
-extern long ia64_ssc (long arg0, long arg1, long arg2, long arg3, int nr);
-
-#endif /* _IA64_PLATFORM_HPSIM_SSC_H */
arch/ia64/hp/sim/simeth.c deleted +0 -510

510 lines not on this page · raw message

arch/ia64/hp/sim/simscsi.c deleted +0 -373

373 lines not on this page · raw message

arch/ia64/hp/sim/simserial.c deleted +0 -520

520 lines not on this page · raw message

arch/ia64/include/asm/acpi.h +1 -3
index 80c5ef8f475e..0afb3bc4b4a1 100644
@@ -37,9 +37,7 @@ const char *acpi_get_sysname (void);
 #else
 static inline const char *acpi_get_sysname (void)
 {
-# if defined (CONFIG_IA64_HP_SIM)
-	return "hpsim";
-# elif defined (CONFIG_IA64_HP_ZX1)
+# if defined (CONFIG_IA64_HP_ZX1)
 	return "hpzx1";
 # elif defined (CONFIG_IA64_HP_ZX1_SWIOTLB)
 	return "hpzx1_swiotlb";
arch/ia64/include/asm/hpsim.h deleted +0 -17
deleted file mode 100644
index 00fbd5cc8ab8..000000000000
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASMIA64_HPSIM_H
-#define _ASMIA64_HPSIM_H
-
-#ifndef CONFIG_HP_SIMSERIAL_CONSOLE
-static inline int simcons_register(void) { return 1; }
-#else
-int simcons_register(void);
-#endif
-
-struct tty_driver;
-extern struct tty_driver *hp_simserial_driver;
-
-extern int hpsim_get_irq(int intr);
-void ia64_ctl_trace(long on);
-
-#endif
arch/ia64/include/asm/iosapic.h +0 -12
index f48556cb8afc..a91aeb413e17 100644
@@ -52,8 +52,6 @@
 
 #ifndef __ASSEMBLY__
 
-#ifdef CONFIG_IOSAPIC
-
 #define NR_IOSAPICS			256
 
 #define iosapic_pcat_compat_init	ia64_native_iosapic_pcat_compat_init
@@ -103,16 +101,6 @@ extern int __init iosapic_register_platform_intr (u32 int_type,
 #ifdef CONFIG_NUMA
 extern void map_iosapic_to_node (unsigned int, int);
 #endif
-#else
-#define iosapic_system_init(pcat_compat)			do { } while (0)
-#define iosapic_init(address,gsi_base)				(-EINVAL)
-#define iosapic_remove(gsi_base)				(-ENODEV)
-#define iosapic_register_intr(gsi,polarity,trigger)		(gsi)
-#define iosapic_unregister_intr(irq)				do { } while (0)
-#define iosapic_override_isa_irq(isa_irq,gsi,polarity,trigger)	do { } while (0)
-#define iosapic_register_platform_intr(type,gsi,pmi,eid,id, \
-	polarity,trigger)					(gsi)
-#endif
 
 # endif /* !__ASSEMBLY__ */
 #endif /* __ASM_IA64_IOSAPIC_H */
arch/ia64/include/asm/machvec.h +1 -10
index f426a9829595..5a9a8af79308 100644
@@ -16,7 +16,6 @@
 struct device;
 
 typedef void ia64_mv_setup_t (char **);
-typedef void ia64_mv_irq_init_t (void);
 typedef void ia64_mv_dma_init (void);
 typedef const struct dma_map_ops *ia64_mv_dma_get_ops(struct device *);
 
@@ -27,9 +26,7 @@ machvec_noop (void)
 
 extern void machvec_setup (char **);
 
-# if defined (CONFIG_IA64_HP_SIM)
-#  include <asm/machvec_hpsim.h>
-# elif defined (CONFIG_IA64_DIG)
+# if defined (CONFIG_IA64_DIG)
 #  include <asm/machvec_dig.h>
 # elif defined(CONFIG_IA64_DIG_VTD)
 #  include <asm/machvec_dig_vtd.h>
@@ -46,7 +43,6 @@ extern void machvec_setup (char **);
 # else
 #  define ia64_platform_name	ia64_mv.name
 #  define platform_setup	ia64_mv.setup
-#  define platform_irq_init	ia64_mv.irq_init
 #  define platform_dma_init		ia64_mv.dma_init
 #  define platform_dma_get_ops		ia64_mv.dma_get_ops
 # endif
@@ -59,7 +55,6 @@ extern void machvec_setup (char **);
 struct ia64_machine_vector {
 	const char *name;
 	ia64_mv_setup_t *setup;
-	ia64_mv_irq_init_t *irq_init;
 	ia64_mv_dma_init *dma_init;
 	ia64_mv_dma_get_ops *dma_get_ops;
 } __attribute__((__aligned__(16))); /* align attrib? see above comment */
@@ -68,7 +63,6 @@ struct ia64_machine_vector {
 {						\
 	#name,					\
 	platform_setup,				\
-	platform_irq_init,			\
 	platform_dma_init,			\
 	platform_dma_get_ops,			\
 }
@@ -91,9 +85,6 @@ extern const struct dma_map_ops *dma_get_ops(struct device *);
 #ifndef platform_setup
 # define platform_setup			machvec_setup
 #endif
-#ifndef platform_irq_init
-# define platform_irq_init		machvec_noop
-#endif
 #ifndef platform_dma_init
 # define platform_dma_init		swiotlb_dma_init
 #endif
arch/ia64/include/asm/machvec_hpsim.h deleted +0 -19
deleted file mode 100644
index 056f8405822e..000000000000
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_IA64_MACHVEC_HPSIM_h
-#define _ASM_IA64_MACHVEC_HPSIM_h
-
-extern ia64_mv_setup_t hpsim_setup;
-extern ia64_mv_irq_init_t hpsim_irq_init;
-
-/*
- * This stuff has dual use!
- *
- * For a generic kernel, the macros are used to initialize the
- * platform's machvec structure.  When compiling a non-generic kernel,
- * the macros are used directly.
- */
-#define ia64_platform_name	"hpsim"
-#define platform_setup		hpsim_setup
-#define platform_irq_init	hpsim_irq_init
-
-#endif /* _ASM_IA64_MACHVEC_HPSIM_h */
arch/ia64/kernel/Makefile +1 -2
index 4ba05140b249..3ada440ff893 100644
@@ -12,13 +12,12 @@ extra-y	:= head.o vmlinux.lds
 obj-y := entry.o efi.o efi_stub.o gate-data.o fsys.o ia64_ksyms.o irq.o irq_ia64.o	\
 	 irq_lsapic.o ivt.o machvec.o pal.o patch.o process.o perfmon.o ptrace.o sal.o		\
 	 salinfo.o setup.o signal.o sys_ia64.o time.o traps.o unaligned.o \
-	 unwind.o mca.o mca_asm.o topology.o dma-mapping.o
+	 unwind.o mca.o mca_asm.o topology.o dma-mapping.o iosapic.o
 
 obj-$(CONFIG_ACPI)		+= acpi.o acpi-ext.o
 obj-$(CONFIG_IA64_BRL_EMU)	+= brl_emu.o
 
 obj-$(CONFIG_IA64_PALINFO)	+= palinfo.o
-obj-$(CONFIG_IOSAPIC)		+= iosapic.o
 obj-$(CONFIG_MODULES)		+= module.o
 obj-$(CONFIG_SMP)		+= smp.o smpboot.o
 obj-$(CONFIG_NUMA)		+= numa.o
arch/ia64/kernel/irq_ia64.c +0 -2
index 1c81ec752b04..e3874734b149 100644
@@ -53,7 +53,6 @@
 #define IRQ_USED		(1)
 #define IRQ_RSVD		(2)
 
-/* These can be overridden in platform_irq_init */
 int ia64_first_device_vector = IA64_DEF_FIRST_DEVICE_VECTOR;
 int ia64_last_device_vector = IA64_DEF_LAST_DEVICE_VECTOR;
 
@@ -648,7 +647,6 @@ init_IRQ (void)
 #ifdef CONFIG_PERFMON
 	pfm_init_percpu();
 #endif
-	platform_irq_init();
 }
 
 void
arch/ia64/kernel/setup.c +2 -11
index 4dc74500eac5..42ef03ce2fd4 100644
@@ -63,7 +63,6 @@
 #include <asm/smp.h>
 #include <asm/tlbflush.h>
 #include <asm/unistd.h>
-#include <asm/hpsim.h>
 
 #if defined(CONFIG_SMP) && (IA64_CPU_SIZE > PAGE_SIZE)
 # error "struct cpuinfo_ia64 too big!"
@@ -461,16 +460,11 @@ io_port_init (void)
 static inline int __init
 early_console_setup (char *cmdline)
 {
-	int earlycons = 0;
-
 #ifdef CONFIG_EFI_PCDP
 	if (!efi_setup_pcdp_console(cmdline))
-		earlycons++;
+		return 0;
 #endif
-	if (!simcons_register())
-		earlycons++;
-
-	return (earlycons) ? 0 : -1;
+	return -1;
 }
 
 static inline void
@@ -608,9 +602,6 @@ setup_arch (char **cmdline_p)
 		ia64_mca_init();
 
 	platform_setup(cmdline_p);
-#ifndef CONFIG_IA64_HP_SIM
-	check_sal_cache_flush();
-#endif
 	paging_init();
 
 	clear_sched_clock_stable();
Signature · 1 line
2.20.1
#17 lore raw

PATCH 18/29 ia64: remove CONFIG_PCI ifdefs

In reply to Christoph Hellwig

Now that hpsim support is gone, CONFIG_PCI is forced on for ia64, and we can remove a few ifdefs for it.

---
 arch/ia64/Makefile              |  2 +-
 arch/ia64/hp/common/sba_iommu.c | 10 +---------
 arch/ia64/include/asm/dma.h     |  6 +-----
 arch/ia64/kernel/sys_ia64.c     | 18 ------------------
 arch/ia64/mm/init.c             |  2 --
 5 files changed, 3 insertions(+), 35 deletions(-)
arch/ia64/Makefile +1 -1
index 8f650541d4eb..54424415851c 100644
@@ -51,7 +51,7 @@ core-$(CONFIG_IA64_HP_ZX1)	+= arch/ia64/dig/
 core-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += arch/ia64/dig/
 core-$(CONFIG_IA64_SGI_UV)	+= arch/ia64/uv/
 
-drivers-$(CONFIG_PCI)		+= arch/ia64/pci/
+drivers-y			+= arch/ia64/pci/
 drivers-$(CONFIG_IA64_HP_ZX1)	+= arch/ia64/hp/common/ arch/ia64/hp/zx1/
 drivers-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += arch/ia64/hp/common/ arch/ia64/hp/zx1/
 drivers-$(CONFIG_IA64_GENERIC)	+= arch/ia64/hp/common/ arch/ia64/hp/zx1/ arch/ia64/uv/
arch/ia64/hp/common/sba_iommu.c +1 -9
index 3d24cc43385b..18321ce8bfa0 100644
@@ -251,12 +251,8 @@ static SBA_INLINE void sba_free_range(struct ioc *, dma_addr_t, size_t);
 static u64 prefetch_spill_page;
 #endif
 
-#ifdef CONFIG_PCI
-# define GET_IOC(dev)	((dev_is_pci(dev))						\
+#define GET_IOC(dev)	((dev_is_pci(dev))						\
 			 ? ((struct ioc *) PCI_CONTROLLER(to_pci_dev(dev))->iommu) : NULL)
-#else
-# define GET_IOC(dev)	NULL
-#endif
 
 /*
 ** DMA_CHUNK_SIZE is used by the SCSI mid-layer to break up
@@ -1741,9 +1737,7 @@ ioc_sac_init(struct ioc *ioc)
 	controller->iommu = ioc;
 	sac->sysdata = controller;
 	sac->dma_mask = 0xFFFFFFFFUL;
-#ifdef CONFIG_PCI
 	sac->dev.bus = &pci_bus_type;
-#endif
 	ioc->sac_only_dev = sac;
 }
 
@@ -2121,13 +2115,11 @@ sba_init(void)
 	}
 #endif
 
-#ifdef CONFIG_PCI
 	{
 		struct pci_bus *b = NULL;
 		while ((b = pci_find_next_bus(b)) != NULL)
 			sba_connect_bus(b);
 	}
-#endif
 
 #ifdef CONFIG_PROC_FS
 	ioc_proc_init();
arch/ia64/include/asm/dma.h +1 -5
index 23604d6a2cb2..59625e9c1f9c 100644
@@ -12,11 +12,7 @@
 
 extern unsigned long MAX_DMA_ADDRESS;
 
-#ifdef CONFIG_PCI
-  extern int isa_dma_bridge_buggy;
-#else
-# define isa_dma_bridge_buggy 	(0)
-#endif
+extern int isa_dma_bridge_buggy;
 
 #define free_dma(x)
 
arch/ia64/kernel/sys_ia64.c +0 -18
index 9ebe1d633abc..e14db25146c2 100644
@@ -166,21 +166,3 @@ ia64_mremap (unsigned long addr, unsigned long old_len, unsigned long new_len, u
 		force_successful_syscall_return();
 	return addr;
 }
-
-#ifndef CONFIG_PCI
-
-asmlinkage long
-sys_pciconfig_read (unsigned long bus, unsigned long dfn, unsigned long off, unsigned long len,
-		    void *buf)
-{
-	return -ENOSYS;
-}
-
-asmlinkage long
-sys_pciconfig_write (unsigned long bus, unsigned long dfn, unsigned long off, unsigned long len,
-		     void *buf)
-{
-	return -ENOSYS;
-}
-
-#endif /* CONFIG_PCI */
arch/ia64/mm/init.c +0 -2
index aae75fd7b810..9a4a16439900 100644
@@ -632,14 +632,12 @@ mem_init (void)
 	BUG_ON(PTRS_PER_PMD * sizeof(pmd_t) != PAGE_SIZE);
 	BUG_ON(PTRS_PER_PTE * sizeof(pte_t) != PAGE_SIZE);
 
-#ifdef CONFIG_PCI
 	/*
 	 * This needs to be called _after_ the command line has been parsed but _before_
 	 * any drivers that may need the PCI DMA interface are initialized or bootmem has
 	 * been freed.
 	 */
 	platform_dma_init();
-#endif
 
 #ifdef CONFIG_FLATMEM
 	BUG_ON(!mem_map);
Signature · 1 line
2.20.1
#18 lore raw

PATCH 19/29 ia64: remove CONFIG_ACPI ifdefs

In reply to Christoph Hellwig

Now that hpsim support is gone, CONFIG_ACPI is forced on for ia64, and we can remove a few ifdefs for it.

---
 arch/ia64/include/asm/acpi.h |  4 ++--
 arch/ia64/kernel/Makefile    |  4 ++--
 arch/ia64/kernel/iosapic.c   |  2 --
 arch/ia64/kernel/irq_ia64.c  |  2 --
 arch/ia64/kernel/mca.c       | 18 ------------------
 arch/ia64/kernel/setup.c     | 10 ++++------
 arch/ia64/kernel/topology.c  |  4 ----
 7 files changed, 8 insertions(+), 36 deletions(-)
arch/ia64/include/asm/acpi.h +2 -2
index 0afb3bc4b4a1..01c1c269aa13 100644
@@ -17,7 +17,7 @@
 #include <linux/numa.h>
 #include <asm/numa.h>
 
-#ifdef	CONFIG_ACPI
+
 extern int acpi_lapic;
 #define acpi_disabled 0	/* ACPI always enabled on IA64 */
 #define acpi_noirq 0	/* ACPI always enabled on IA64 */
@@ -28,7 +28,7 @@ static inline bool acpi_has_cpu_in_madt(void)
 {
 	return !!acpi_lapic;
 }
-#endif
+
 #define acpi_processor_cstate_check(x) (x) /* no idle limits on IA64 :) */
 static inline void disable_acpi(void) { }
 
arch/ia64/kernel/Makefile +2 -2
index 3ada440ff893..dbde36702cf2 100644
@@ -12,9 +12,9 @@ extra-y	:= head.o vmlinux.lds
 obj-y := entry.o efi.o efi_stub.o gate-data.o fsys.o ia64_ksyms.o irq.o irq_ia64.o	\
 	 irq_lsapic.o ivt.o machvec.o pal.o patch.o process.o perfmon.o ptrace.o sal.o		\
 	 salinfo.o setup.o signal.o sys_ia64.o time.o traps.o unaligned.o \
-	 unwind.o mca.o mca_asm.o topology.o dma-mapping.o iosapic.o
+	 unwind.o mca.o mca_asm.o topology.o dma-mapping.o iosapic.o acpi.o \
+	 acpi-ext.o
 
-obj-$(CONFIG_ACPI)		+= acpi.o acpi-ext.o
 obj-$(CONFIG_IA64_BRL_EMU)	+= brl_emu.o
 
 obj-$(CONFIG_IA64_PALINFO)	+= palinfo.o
arch/ia64/kernel/iosapic.c +0 -2
index 9e49fd006859..2d25958a7ed7 100644
@@ -643,10 +643,8 @@ get_target_cpu (unsigned int gsi, int irq)
 	if (!cpu_online(smp_processor_id()))
 		return cpu_physical_id(smp_processor_id());
 
-#ifdef CONFIG_ACPI
 	if (cpe_vector > 0 && irq_to_vector(irq) = IA64_CPEP_VECTOR)
 		return get_cpei_target_cpu();
-#endif
 
 #ifdef CONFIG_NUMA
 	{
arch/ia64/kernel/irq_ia64.c +0 -2
index e3874734b149..b989731bbeac 100644
@@ -633,9 +633,7 @@ ia64_native_register_ipi(void)
 void __init
 init_IRQ (void)
 {
-#ifdef CONFIG_ACPI
 	acpi_boot_init();
-#endif
 	ia64_register_ipi();
 	register_percpu_irq(IA64_SPURIOUS_INT_VECTOR, NULL);
 #ifdef CONFIG_SMP
arch/ia64/kernel/mca.c +0 -18
index f72b05fe918b..a7f05883935b 100644
@@ -149,9 +149,7 @@ static ia64_mc_info_t		ia64_mc_info;
 #define CPE_HISTORY_LENGTH    5
 #define CMC_HISTORY_LENGTH    5
 
-#ifdef CONFIG_ACPI
 static struct timer_list cpe_poll_timer;
-#endif
 static struct timer_list cmc_poll_timer;
 /*
  * This variable tells whether we are currently in polling mode.
@@ -532,8 +530,6 @@ int mca_recover_range(unsigned long addr)
 }
 EXPORT_SYMBOL_GPL(mca_recover_range);
 
-#ifdef CONFIG_ACPI
-
 int cpe_vector = -1;
 int ia64_cpe_irq = -1;
 
@@ -595,9 +591,6 @@ ia64_mca_cpe_int_handler (int cpe_irq, void *arg)
 	return IRQ_HANDLED;
 }
 
-#endif /* CONFIG_ACPI */
-
-#ifdef CONFIG_ACPI
 /*
  * ia64_mca_register_cpev
  *
@@ -625,7 +618,6 @@ ia64_mca_register_cpev (int cpev)
 	IA64_MCA_DEBUG("%s: corrected platform error "
 		       "vector %#x registered\n", __func__, cpev);
 }
-#endif /* CONFIG_ACPI */
 
 /*
  * ia64_mca_cmc_vector_setup
@@ -1540,8 +1532,6 @@ ia64_mca_cmc_poll (struct timer_list *unused)
  * Outputs
  * 	handled
  */
-#ifdef CONFIG_ACPI
-
 static irqreturn_t
 ia64_mca_cpe_int_caller(int cpe_irq, void *arg)
 {
@@ -1604,8 +1594,6 @@ ia64_mca_cpe_poll (struct timer_list *unused)
 							IA64_IPI_DM_INT, 0);
 }
 
-#endif /* CONFIG_ACPI */
-
 static int
 default_monarch_init_process(struct notifier_block *self, unsigned long val, void *data)
 {
@@ -1799,7 +1787,6 @@ static struct irqaction mca_wkup_irqaction = {
 	.name =		"mca_wkup"
 };
 
-#ifdef CONFIG_ACPI
 static struct irqaction mca_cpe_irqaction = {
 	.handler =	ia64_mca_cpe_int_handler,
 	.name =		"cpe_hndlr"
@@ -1809,7 +1796,6 @@ static struct irqaction mca_cpep_irqaction = {
 	.handler =	ia64_mca_cpe_int_caller,
 	.name =		"cpe_poll"
 };
-#endif /* CONFIG_ACPI */
 
 /* Minimal format of the MCA/INIT stacks.  The pseudo processes that run on
  * these stacks can never sleep, they cannot return from the kernel to user
@@ -2081,10 +2067,8 @@ void __init ia64_mca_irq_init(void)
 	/* Setup the MCA wakeup interrupt vector */
 	register_percpu_irq(IA64_MCA_WAKEUP_VECTOR, &mca_wkup_irqaction);
 
-#ifdef CONFIG_ACPI
 	/* Setup the CPEI/P handler */
 	register_percpu_irq(IA64_CPEP_VECTOR, &mca_cpep_irqaction);
-#endif
 }
 
 /*
@@ -2112,7 +2096,6 @@ ia64_mca_late_init(void)
 			  ia64_mca_cpu_online, NULL);
 	IA64_MCA_DEBUG("%s: CMCI/P setup and enabled.\n", __func__);
 
-#ifdef CONFIG_ACPI
 	/* Setup the CPEI/P vector and handler */
 	cpe_vector = acpi_request_vector(ACPI_INTERRUPT_CPEI);
 	timer_setup(&cpe_poll_timer, ia64_mca_cpe_poll, 0);
@@ -2143,7 +2126,6 @@ ia64_mca_late_init(void)
 			IA64_MCA_DEBUG("%s: CPEP setup and enabled.\n", __func__);
 		}
 	}
-#endif
 
 	return 0;
 }
arch/ia64/kernel/setup.c +4 -6
index 42ef03ce2fd4..8d47836d932c 100644
@@ -537,21 +537,19 @@ setup_arch (char **cmdline_p)
 	if (early_console_setup(*cmdline_p) = 0)
 		mark_bsp_online();
 
-#ifdef CONFIG_ACPI
 	/* Initialize the ACPI boot-time table parser */
 	acpi_table_init();
 	early_acpi_boot_init();
-# ifdef CONFIG_ACPI_NUMA
+#ifdef CONFIG_ACPI_NUMA
 	acpi_numa_init();
 	acpi_numa_fixup();
-#  ifdef CONFIG_ACPI_HOTPLUG_CPU
+#ifdef CONFIG_ACPI_HOTPLUG_CPU
 	prefill_possible_map();
-#  endif
+#endif
 	per_cpu_scan_finalize((cpumask_weight(&early_cpu_possible_map) = 0 ?
 		32 : cpumask_weight(&early_cpu_possible_map)),
 		additional_cpus > 0 ? additional_cpus : 0);
-# endif
-#endif /* CONFIG_APCI_BOOT */
+#endif /* CONFIG_ACPI_NUMA */
 
 #ifdef CONFIG_SMP
 	smp_build_cpu_map();
arch/ia64/kernel/topology.c +0 -4
index e311ee13e61d..09fc385c2acd 100644
@@ -42,7 +42,6 @@ EXPORT_SYMBOL_GPL(arch_fix_phys_package_id);
 #ifdef CONFIG_HOTPLUG_CPU
 int __ref arch_register_cpu(int num)
 {
-#ifdef CONFIG_ACPI
 	/*
 	 * If CPEI can be re-targeted or if this is not
 	 * CPEI target, then it is hotpluggable
@@ -50,7 +49,6 @@ int __ref arch_register_cpu(int num)
 	if (can_cpei_retarget() || !is_cpu_cpei_target(num))
 		sysfs_cpus[num].cpu.hotpluggable = 1;
 	map_cpu_to_node(num, node_cpuid[num].nid);
-#endif
 	return register_cpu(&sysfs_cpus[num].cpu, num);
 }
 EXPORT_SYMBOL(arch_register_cpu);
@@ -58,9 +56,7 @@ EXPORT_SYMBOL(arch_register_cpu);
 void __ref arch_unregister_cpu(int num)
 {
 	unregister_cpu(&sysfs_cpus[num].cpu);
-#ifdef CONFIG_ACPI
 	unmap_cpu_from_node(num, cpu_to_node(num));
-#endif
 }
 EXPORT_SYMBOL(arch_unregister_cpu);
 #else
Signature · 1 line
2.20.1
#19 lore raw

PATCH 20/29 ia64: remove the zx1 swiotlb machvec

In reply to Christoph Hellwig

The aim of this machvec is to support devices with < 32-bit dma masks. But given that ia64 only has a ZONE_DMA32 and not a ZONE_DMA that isn't supported by swiotlb either.

---
 .../admin-guide/kernel-parameters.txt         |  2 +-
 arch/ia64/Kconfig                             | 13 +---
 arch/ia64/Kconfig.debug                       |  2 +-
 arch/ia64/Makefile                            |  2 -
 arch/ia64/hp/common/Makefile                  |  2 -
 arch/ia64/hp/common/hwsw_iommu.c              | 60 -------------------
 arch/ia64/hp/common/sba_iommu.c               | 15 +----
 arch/ia64/hp/zx1/Makefile                     |  2 +-
 arch/ia64/hp/zx1/hpzx1_swiotlb_machvec.c      |  3 -
 arch/ia64/include/asm/acpi.h                  |  2 -
 arch/ia64/include/asm/dma-mapping.h           |  8 +--
 arch/ia64/include/asm/machvec.h               | 15 -----
 arch/ia64/include/asm/machvec_hpzx1_swiotlb.h | 20 -------
 arch/ia64/kernel/dma-mapping.c                |  6 --
 drivers/char/agp/Kconfig                      |  2 +-
 15 files changed, 7 insertions(+), 147 deletions(-)
 delete mode 100644 arch/ia64/hp/common/hwsw_iommu.c
 delete mode 100644 arch/ia64/hp/zx1/hpzx1_swiotlb_machvec.c
 delete mode 100644 arch/ia64/include/asm/machvec_hpzx1_swiotlb.h
Documentation/admin-guide/kernel-parameters.txt +1 -1
index 47d981a86e2f..33ab47447ef1 100644
@@ -2373,7 +2373,7 @@
 
 	machvec=	[IA-64] Force the use of a particular machine-vector
 			(machvec) in a generic kernel.
-			Example: machvec=hpzx1_swiotlb
+			Example: machvec=hpzx1
 
 	machtype=	[Loongson] Share the same kernel image file between different
 			 yeeloong laptop.
arch/ia64/Kconfig +1 -12
index 63db7a5378ac..a42ab41ee8ab 100644
@@ -138,7 +138,6 @@ config IA64_GENERIC
 	  DIG-compliant		For DIG ("Developer's Interface Guide") compliant systems
 	  DIG+Intel+IOMMU	For DIG systems with Intel IOMMU
 	  HP-zx1/sx1000		For HP systems
-	  HP-zx1/sx1000+swiotlb	For HP systems with (broken) DMA-constrained devices.
 	  SGI-UV		For SGI UV systems
 
 	  If you don't know what to do, choose "generic".
@@ -158,16 +157,6 @@ config IA64_HP_ZX1
 	  Build a kernel that runs on HP zx1 and sx1000 systems.  This adds
 	  support for the HP I/O MMU.
 
-config IA64_HP_ZX1_SWIOTLB
-	bool "HP-zx1/sx1000 with software I/O TLB"
-	select SWIOTLB
-	help
-	  Build a kernel that runs on HP zx1 and sx1000 systems even when they
-	  have broken PCI devices which cannot DMA to full 32 bits.  Apart
-	  from support for the HP I/O MMU, this includes support for the software
-	  I/O TLB, which allows supporting the broken devices at the expense of
-	  wasting some kernel memory (about 2MB by default).
-
 config IA64_SGI_UV
 	bool "SGI-UV"
 	select NUMA
@@ -350,7 +339,7 @@ config ARCH_SPARSEMEM_ENABLE
 	select SPARSEMEM_VMEMMAP_ENABLE
 
 config ARCH_DISCONTIGMEM_DEFAULT
-	def_bool y if (IA64_GENERIC || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB)
+	def_bool y if (IA64_GENERIC || IA64_HP_ZX1)
 	depends on ARCH_DISCONTIGMEM_ENABLE
 
 config NUMA
arch/ia64/Kconfig.debug +1 -1
index 793a613c54ab..abf8d04ab6ab 100644
@@ -14,7 +14,7 @@ config IA64_GRANULE_16MB
 
 config IA64_GRANULE_64MB
 	bool "64MB"
-	depends on !(IA64_GENERIC || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB)
+	depends on !(IA64_GENERIC || IA64_HP_ZX1)
 
 endchoice
 
arch/ia64/Makefile +0 -2
index 54424415851c..d87e49a39171 100644
@@ -48,12 +48,10 @@ core-$(CONFIG_IA64_DIG) 	+= arch/ia64/dig/
 core-$(CONFIG_IA64_DIG_VTD) 	+= arch/ia64/dig/
 core-$(CONFIG_IA64_GENERIC) 	+= arch/ia64/dig/
 core-$(CONFIG_IA64_HP_ZX1)	+= arch/ia64/dig/
-core-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += arch/ia64/dig/
 core-$(CONFIG_IA64_SGI_UV)	+= arch/ia64/uv/
 
 drivers-y			+= arch/ia64/pci/
 drivers-$(CONFIG_IA64_HP_ZX1)	+= arch/ia64/hp/common/ arch/ia64/hp/zx1/
-drivers-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += arch/ia64/hp/common/ arch/ia64/hp/zx1/
 drivers-$(CONFIG_IA64_GENERIC)	+= arch/ia64/hp/common/ arch/ia64/hp/zx1/ arch/ia64/uv/
 drivers-$(CONFIG_OPROFILE)	+= arch/ia64/oprofile/
 
arch/ia64/hp/common/Makefile +0 -2
index 6026308f9a62..47c8f6ecb6f4 100644
@@ -7,6 +7,4 @@
 #
 
 obj-y := sba_iommu.o
-obj-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += hwsw_iommu.o
-obj-$(CONFIG_IA64_GENERIC) += hwsw_iommu.o
 obj-$(CONFIG_IA64_HP_AML_NFW) += aml_nfw.o
arch/ia64/hp/common/hwsw_iommu.c deleted +0 -60

60 lines not on this page · raw message

arch/ia64/hp/common/sba_iommu.c +1 -14
index 18321ce8bfa0..215fa688b729 100644
@@ -2059,7 +2059,7 @@ arch_initcall(acpi_sba_ioc_init_acpi);
 static int __init
 sba_init(void)
 {
-	if (!ia64_platform_is("hpzx1") && !ia64_platform_is("hpzx1_swiotlb"))
+	if (!ia64_platform_is("hpzx1"))
 		return 0;
 
 #if defined(CONFIG_IA64_GENERIC)
@@ -2102,19 +2102,6 @@ sba_init(void)
 		return 0;
 	}
 
-#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_HP_ZX1_SWIOTLB)
-	/*
-	 * hpzx1_swiotlb needs to have a fairly small swiotlb bounce
-	 * buffer setup to support devices with smaller DMA masks than
-	 * sba_iommu can handle.
-	 */
-	if (ia64_platform_is("hpzx1_swiotlb")) {
-		extern void hwsw_init(void);
-
-		hwsw_init();
-	}
-#endif
-
 	{
 		struct pci_bus *b = NULL;
 		while ((b = pci_find_next_bus(b)) != NULL)
arch/ia64/hp/zx1/Makefile +1 -1
index 46b37d820b59..bea44b4ed173 100644
@@ -6,4 +6,4 @@
 # Copyright (C) Alex Williamson ([email protected])
 #
 
-obj-$(CONFIG_IA64_GENERIC) += hpzx1_machvec.o hpzx1_swiotlb_machvec.o
+obj-$(CONFIG_IA64_GENERIC) += hpzx1_machvec.o
arch/ia64/hp/zx1/hpzx1_swiotlb_machvec.c deleted +0 -3
deleted file mode 100644
index 4392a96b3c58..000000000000
@@ -1,3 +0,0 @@
-#define MACHVEC_PLATFORM_NAME		hpzx1_swiotlb
-#define MACHVEC_PLATFORM_HEADER		<asm/machvec_hpzx1_swiotlb.h>
-#include <asm/machvec_init.h>
arch/ia64/include/asm/acpi.h +0 -2
index 01c1c269aa13..9e563df73038 100644
@@ -39,8 +39,6 @@ static inline const char *acpi_get_sysname (void)
 {
 # if defined (CONFIG_IA64_HP_ZX1)
 	return "hpzx1";
-# elif defined (CONFIG_IA64_HP_ZX1_SWIOTLB)
-	return "hpzx1_swiotlb";
 # elif defined (CONFIG_IA64_SGI_UV)
 	return "uv";
 # elif defined (CONFIG_IA64_DIG)
arch/ia64/include/asm/dma-mapping.h +1 -7
index f7ec71e4001e..a5d9d788eede 100644
@@ -6,17 +6,11 @@
  * Copyright (C) 2003-2004 Hewlett-Packard Co
  *	David Mosberger-Tang <[email protected]>
  */
-#include <asm/machvec.h>
-#include <linux/scatterlist.h>
-#include <linux/dma-debug.h>
-
 extern const struct dma_map_ops *dma_ops;
-extern struct ia64_machine_vector ia64_mv;
-extern void set_iommu_machvec(void);
 
 static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
 {
-	return platform_dma_get_ops(NULL);
+	return dma_ops;
 }
 
 #endif /* _ASM_IA64_DMA_MAPPING_H */
arch/ia64/include/asm/machvec.h +0 -15
index 5a9a8af79308..fa867e980d87 100644
@@ -17,12 +17,6 @@ struct device;
 
 typedef void ia64_mv_setup_t (char **);
 typedef void ia64_mv_dma_init (void);
-typedef const struct dma_map_ops *ia64_mv_dma_get_ops(struct device *);
-
-static inline void
-machvec_noop (void)
-{
-}
 
 extern void machvec_setup (char **);
 
@@ -32,8 +26,6 @@ extern void machvec_setup (char **);
 #  include <asm/machvec_dig_vtd.h>
 # elif defined (CONFIG_IA64_HP_ZX1)
 #  include <asm/machvec_hpzx1.h>
-# elif defined (CONFIG_IA64_HP_ZX1_SWIOTLB)
-#  include <asm/machvec_hpzx1_swiotlb.h>
 # elif defined (CONFIG_IA64_SGI_UV)
 #  include <asm/machvec_uv.h>
 # elif defined (CONFIG_IA64_GENERIC)
@@ -44,7 +36,6 @@ extern void machvec_setup (char **);
 #  define ia64_platform_name	ia64_mv.name
 #  define platform_setup	ia64_mv.setup
 #  define platform_dma_init		ia64_mv.dma_init
-#  define platform_dma_get_ops		ia64_mv.dma_get_ops
 # endif
 
 /* __attribute__((__aligned__(16))) is required to make size of the
@@ -56,7 +47,6 @@ struct ia64_machine_vector {
 	const char *name;
 	ia64_mv_setup_t *setup;
 	ia64_mv_dma_init *dma_init;
-	ia64_mv_dma_get_ops *dma_get_ops;
 } __attribute__((__aligned__(16))); /* align attrib? see above comment */
 
 #define MACHVEC_INIT(name)			\
@@ -64,7 +54,6 @@ struct ia64_machine_vector {
 	#name,					\
 	platform_setup,				\
 	platform_dma_init,			\
-	platform_dma_get_ops,			\
 }
 
 extern struct ia64_machine_vector ia64_mv;
@@ -76,7 +65,6 @@ extern void machvec_init_from_cmdline(const char *cmdline);
 # endif /* CONFIG_IA64_GENERIC */
 
 extern void swiotlb_dma_init(void);
-extern const struct dma_map_ops *dma_get_ops(struct device *);
 
 /*
  * Define default versions so we can extend machvec for new platforms without having
@@ -88,8 +76,5 @@ extern const struct dma_map_ops *dma_get_ops(struct device *);
 #ifndef platform_dma_init
 # define platform_dma_init		swiotlb_dma_init
 #endif
-#ifndef platform_dma_get_ops
-# define platform_dma_get_ops		dma_get_ops
-#endif
 
 #endif /* _ASM_IA64_MACHVEC_H */
arch/ia64/include/asm/machvec_hpzx1_swiotlb.h deleted +0 -20
deleted file mode 100644
index 5aec6a008c61..000000000000
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_IA64_MACHVEC_HPZX1_SWIOTLB_h
-#define _ASM_IA64_MACHVEC_HPZX1_SWIOTLB_h
-
-extern ia64_mv_setup_t				dig_setup;
-extern ia64_mv_dma_get_ops			hwsw_dma_get_ops;
-
-/*
- * This stuff has dual use!
- *
- * For a generic kernel, the macros are used to initialize the
- * platform's machvec structure.  When compiling a non-generic kernel,
- * the macros are used directly.
- */
-#define ia64_platform_name			"hpzx1_swiotlb"
-#define platform_setup				dig_setup
-#define platform_dma_init			machvec_noop
-#define platform_dma_get_ops			hwsw_dma_get_ops
-
-#endif /* _ASM_IA64_MACHVEC_HPZX1_SWIOTLB_h */
arch/ia64/kernel/dma-mapping.c +0 -6
index ad7d9963de34..4be5ee04ccfa 100644
@@ -9,12 +9,6 @@ int iommu_detected __read_mostly;
 const struct dma_map_ops *dma_ops;
 EXPORT_SYMBOL(dma_ops);
 
-const struct dma_map_ops *dma_get_ops(struct device *dev)
-{
-	return dma_ops;
-}
-EXPORT_SYMBOL(dma_get_ops);
-
 #ifdef CONFIG_SWIOTLB
 void *arch_dma_alloc(struct device *dev, size_t size,
 		dma_addr_t *dma_handle, gfp_t gfp, unsigned long attrs)
drivers/char/agp/Kconfig +1 -1
index be50d7a93f4c..42d45e97c2ae 100644
@@ -118,7 +118,7 @@ config AGP_I460
 
 config AGP_HP_ZX1
 	tristate "HP ZX1 chipset AGP support"
-	depends on AGP && (IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB || IA64_GENERIC)
+	depends on AGP && (IA64_HP_ZX1 || IA64_GENERIC)
 	help
 	  This option gives you AGP GART support for the HP ZX1 chipset
 	  for IA64 processors.
Signature · 1 line
2.20.1
#20 lore raw

PATCH 21/29 ia64: remove the SGI UV simulator support

In reply to Christoph Hellwig

The simulator support was marked as temporary since the initial commit, so drop it more than 10 years later.

---
 arch/ia64/include/asm/sn/simulator.h | 25 ----------------------
 arch/ia64/include/asm/sn/sn_sal.h    | 10 ---------
 arch/ia64/include/asm/uv/uv.h        |  4 +---
 arch/ia64/uv/kernel/setup.c          | 31 +++++-----------------------
 4 files changed, 6 insertions(+), 64 deletions(-)
 delete mode 100644 arch/ia64/include/asm/sn/simulator.h
arch/ia64/include/asm/sn/simulator.h deleted +0 -25
deleted file mode 100644
index 3e4557df3b7c..000000000000
@@ -1,25 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef _ASM_IA64_SN_SIMULATOR_H
-#define _ASM_IA64_SN_SIMULATOR_H
-
-#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_UV)
-#define SNMAGIC 0xaeeeeeee8badbeefL
-#define IS_MEDUSA()			({long sn; asm("mov %0=cpuid[%1]" : "=r"(sn) : "r"(2)); sn = SNMAGIC;})
-
-#define SIMULATOR_SLEEP()		asm("nop.i 0x8beef")
-#define IS_RUNNING_ON_SIMULATOR()	(sn_prom_type)
-#define IS_RUNNING_ON_FAKE_PROM()	(sn_prom_type = 2)
-extern int sn_prom_type;		/* 0=hardware, 1=medusa/realprom, 2=medusa/fakeprom */
-#else
-#define IS_MEDUSA()			0
-#define SIMULATOR_SLEEP()
-#define IS_RUNNING_ON_SIMULATOR()	0
-#endif
-
-#endif /* _ASM_IA64_SN_SIMULATOR_H */
arch/ia64/include/asm/sn/sn_sal.h +0 -10
index 48b88d0807db..d437aa43343b 100644
@@ -30,8 +30,6 @@
 #define SALRET_INVALID_ARG	(-2)
 #define SALRET_ERROR		(-3)
 
-#define SN_SAL_FAKE_PROM			   0x02009999
-
 /*
  * Returns the physical address of the partition's reserved page through
  * an iterative number of calls.
@@ -81,14 +79,6 @@ sn_change_memprotect(u64 paddr, u64 len, u64 perms, u64 *nasid_array)
 #define SN_MEMPROT_ACCESS_CLASS_6		0x084080
 #define SN_MEMPROT_ACCESS_CLASS_7		0x021080
 
-static inline int
-ia64_sn_is_fake_prom(void)
-{
-	struct ia64_sal_retval rv;
-	SAL_CALL_NOLOCK(rv, SN_SAL_FAKE_PROM, 0, 0, 0, 0, 0, 0, 0);
-	return (rv.status = 0);
-}
-
 union sn_watchlist_u {
 	u64     val;
 	struct {
arch/ia64/include/asm/uv/uv.h +1 -3
index 71df93ee3bc0..502cf1c56369 100644
@@ -2,12 +2,10 @@
 #ifndef _ASM_IA64_UV_UV_H
 #define _ASM_IA64_UV_UV_H
 
-#include <asm/sn/simulator.h>
-
 static inline int is_uv_system(void)
 {
 	/* temporary support for running on hardware simulator */
-	return IS_MEDUSA() || ia64_platform_is("uv");
+	return ia64_platform_is("uv");
 }
 
 #endif	/* _ASM_IA64_UV_UV_H */
arch/ia64/uv/kernel/setup.c +5 -25
index 11478d2d863d..6ac4bd314d92 100644
@@ -10,14 +10,12 @@
 
 #include <linux/module.h>
 #include <linux/percpu.h>
-#include <asm/sn/simulator.h>
 #include <asm/uv/uv_mmrs.h>
 #include <asm/uv/uv_hub.h>
 
 DEFINE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
 EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info);
 
-int sn_prom_type;
 long sn_coherency_id;
 EXPORT_SYMBOL_GPL(sn_coherency_id);
 
@@ -60,30 +58,11 @@ void __init uv_setup(char **cmdline_p)
 	int nid, cpu, m_val, n_val;
 	unsigned long mmr_base, lowmem_redir_base, lowmem_redir_size;
 
-	if (IS_MEDUSA()) {
-		lowmem_redir_base = 0;
-		lowmem_redir_size = 0;
-		node_id.v = 0;
-		m_n_config.s.m_skt = 37;
-		m_n_config.s.n_skt = 0;
-		mmr_base = 0;
-#if 0
-		/* Need BIOS calls - TDB */
-		if (!ia64_sn_is_fake_prom())
-			sn_prom_type = 1;
-		else
-#endif
-			sn_prom_type = 2;
-		printk(KERN_INFO "Running on medusa with %s PROM\n",
-					(sn_prom_type = 1) ? "real" : "fake");
-	} else {
-		get_lowmem_redirect(&lowmem_redir_base, &lowmem_redir_size);
-		node_id.v = uv_read_local_mmr(UVH_NODE_ID);
-		m_n_config.v = uv_read_local_mmr(UVH_SI_ADDR_MAP_CONFIG);
-		mmr_base -			uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR) &
-				~UV_MMR_ENABLE;
-	}
+	get_lowmem_redirect(&lowmem_redir_base, &lowmem_redir_size);
+	node_id.v = uv_read_local_mmr(UVH_NODE_ID);
+	m_n_config.v = uv_read_local_mmr(UVH_SI_ADDR_MAP_CONFIG);
+	mmr_base = uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR) &
+			~UV_MMR_ENABLE;
 
 	m_val = m_n_config.s.m_skt;
 	n_val = m_n_config.s.n_skt;
Signature · 1 line
2.20.1
#21 lore raw

PATCH 22/29 ia64: remove the unused sn_coherency_id symbol

In reply to Christoph Hellwig

The sn_coherency_id symbol isn't used anywhere, remove it.

---
 arch/ia64/uv/kernel/setup.c | 3 ---
 1 file changed, 3 deletions(-)
arch/ia64/uv/kernel/setup.c +0 -3
index 6ac4bd314d92..b081f5138f5c 100644
@@ -16,9 +16,6 @@
 DEFINE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
 EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info);
 
-long sn_coherency_id;
-EXPORT_SYMBOL_GPL(sn_coherency_id);
-
 struct redir_addr {
 	unsigned long redirect;
 	unsigned long alias;
Signature · 1 line
2.20.1
#22 lore raw

PATCH 23/29 ia64: rework iommu probing

In reply to Christoph Hellwig

ia64 currently organizes the iommu probing along machves, which isn't very helpful. Instead just try to probe for Intel IOMMUs in mem_init as they are properly described in ACPI and if none was found initialize the swiotlb buffer. The HP SBA handling is then only done delayed when the actual hardware is probed. Only in the case that we actually found usable IOMMUs we then set up the DMA ops and free the not needed swiotlb buffer. This scheme gets rid of the need for the dma_init machvec operation, and the dig_vtd machvec.

---
 arch/ia64/Kconfig                       |  5 --
 arch/ia64/Makefile                      |  1 -
 arch/ia64/dig/Makefile                  |  5 --
 arch/ia64/dig/machvec_vtd.c             |  3 -
 arch/ia64/hp/common/sba_iommu.c         | 82 +++++++++----------------
 arch/ia64/include/asm/acpi.h            |  2 -
 arch/ia64/include/asm/machvec.h         | 11 ----
 arch/ia64/include/asm/machvec_dig_vtd.h | 19 ------
 arch/ia64/include/asm/machvec_hpzx1.h   |  2 -
 arch/ia64/include/asm/pci.h             |  3 -
 arch/ia64/kernel/acpi.c                 | 15 -----
 arch/ia64/kernel/dma-mapping.c          |  6 --
 arch/ia64/kernel/pci-dma.c              | 21 -------
 arch/ia64/mm/init.c                     | 13 ++--
 14 files changed, 37 insertions(+), 151 deletions(-)
 delete mode 100644 arch/ia64/dig/machvec_vtd.c
 delete mode 100644 arch/ia64/include/asm/machvec_dig_vtd.h
arch/ia64/Kconfig +0 -5
index a42ab41ee8ab..9a8c7ec60cfc 100644
@@ -146,11 +146,6 @@ config IA64_DIG
 	bool "DIG-compliant"
 	select SWIOTLB
 
-config IA64_DIG_VTD
-	bool "DIG+Intel+IOMMU"
-	select INTEL_IOMMU
-	select PCI_MSI
-
 config IA64_HP_ZX1
 	bool "HP-zx1/sx1000"
 	help
arch/ia64/Makefile +0 -1
index d87e49a39171..172dd884b4d7 100644
@@ -45,7 +45,6 @@ head-y := arch/ia64/kernel/head.o
 libs-y				+= arch/ia64/lib/
 core-y				+= arch/ia64/kernel/ arch/ia64/mm/
 core-$(CONFIG_IA64_DIG) 	+= arch/ia64/dig/
-core-$(CONFIG_IA64_DIG_VTD) 	+= arch/ia64/dig/
 core-$(CONFIG_IA64_GENERIC) 	+= arch/ia64/dig/
 core-$(CONFIG_IA64_HP_ZX1)	+= arch/ia64/dig/
 core-$(CONFIG_IA64_SGI_UV)	+= arch/ia64/uv/
arch/ia64/dig/Makefile +0 -5
index e7f830825470..5c2f638c31f4 100644
@@ -7,9 +7,4 @@
 #
 
 obj-y := setup.o
-ifeq ($(CONFIG_INTEL_IOMMU), y)
-obj-$(CONFIG_IA64_GENERIC) += machvec.o machvec_vtd.o
-else
 obj-$(CONFIG_IA64_GENERIC) += machvec.o
-endif
-
arch/ia64/dig/machvec_vtd.c deleted +0 -3
deleted file mode 100644
index 7cd3eb471cad..000000000000
@@ -1,3 +0,0 @@
-#define MACHVEC_PLATFORM_NAME		dig_vtd
-#define MACHVEC_PLATFORM_HEADER		<asm/machvec_dig_vtd.h>
-#include <asm/machvec_init.h>
arch/ia64/hp/common/sba_iommu.c +28 -54

127 lines not on this page · raw message

arch/ia64/include/asm/acpi.h +0 -2
index 9e563df73038..be6bf3e499a6 100644
@@ -43,8 +43,6 @@ static inline const char *acpi_get_sysname (void)
 	return "uv";
 # elif defined (CONFIG_IA64_DIG)
 	return "dig";
-# elif defined(CONFIG_IA64_DIG_VTD)
-	return "dig_vtd";
 # else
 #	error Unknown platform.  Fix acpi.c.
 # endif
arch/ia64/include/asm/machvec.h +0 -11
index fa867e980d87..b22d0499b58c 100644
@@ -16,14 +16,11 @@
 struct device;
 
 typedef void ia64_mv_setup_t (char **);
-typedef void ia64_mv_dma_init (void);
 
 extern void machvec_setup (char **);
 
 # if defined (CONFIG_IA64_DIG)
 #  include <asm/machvec_dig.h>
-# elif defined(CONFIG_IA64_DIG_VTD)
-#  include <asm/machvec_dig_vtd.h>
 # elif defined (CONFIG_IA64_HP_ZX1)
 #  include <asm/machvec_hpzx1.h>
 # elif defined (CONFIG_IA64_SGI_UV)
@@ -35,7 +32,6 @@ extern void machvec_setup (char **);
 # else
 #  define ia64_platform_name	ia64_mv.name
 #  define platform_setup	ia64_mv.setup
-#  define platform_dma_init		ia64_mv.dma_init
 # endif
 
 /* __attribute__((__aligned__(16))) is required to make size of the
@@ -46,14 +42,12 @@ extern void machvec_setup (char **);
 struct ia64_machine_vector {
 	const char *name;
 	ia64_mv_setup_t *setup;
-	ia64_mv_dma_init *dma_init;
 } __attribute__((__aligned__(16))); /* align attrib? see above comment */
 
 #define MACHVEC_INIT(name)			\
 {						\
 	#name,					\
 	platform_setup,				\
-	platform_dma_init,			\
 }
 
 extern struct ia64_machine_vector ia64_mv;
@@ -64,8 +58,6 @@ extern void machvec_init_from_cmdline(const char *cmdline);
 #  error Unknown configuration.  Update arch/ia64/include/asm/machvec.h.
 # endif /* CONFIG_IA64_GENERIC */
 
-extern void swiotlb_dma_init(void);
-
 /*
  * Define default versions so we can extend machvec for new platforms without having
  * to update the machvec files for all existing platforms.
@@ -73,8 +65,5 @@ extern void swiotlb_dma_init(void);
 #ifndef platform_setup
 # define platform_setup			machvec_setup
 #endif
-#ifndef platform_dma_init
-# define platform_dma_init		swiotlb_dma_init
-#endif
 
 #endif /* _ASM_IA64_MACHVEC_H */
arch/ia64/include/asm/machvec_dig_vtd.h deleted +0 -19
deleted file mode 100644
index bb44eb9039dd..000000000000
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_IA64_MACHVEC_DIG_VTD_h
-#define _ASM_IA64_MACHVEC_DIG_VTD_h
-
-extern ia64_mv_setup_t			dig_setup;
-extern ia64_mv_dma_init			pci_iommu_alloc;
-
-/*
- * This stuff has dual use!
- *
- * For a generic kernel, the macros are used to initialize the
- * platform's machvec structure.  When compiling a non-generic kernel,
- * the macros are used directly.
- */
-#define ia64_platform_name			"dig_vtd"
-#define platform_setup				dig_setup
-#define platform_dma_init			pci_iommu_alloc
-
-#endif /* _ASM_IA64_MACHVEC_DIG_VTD_h */
arch/ia64/include/asm/machvec_hpzx1.h +0 -2
index 5299ac38bfb6..7d37998ffdbf 100644
@@ -3,7 +3,6 @@
 #define _ASM_IA64_MACHVEC_HPZX1_h
 
 extern ia64_mv_setup_t			dig_setup;
-extern ia64_mv_dma_init			sba_dma_init;
 
 /*
  * This stuff has dual use!
@@ -14,6 +13,5 @@ extern ia64_mv_dma_init			sba_dma_init;
  */
 #define ia64_platform_name			"hpzx1"
 #define platform_setup				dig_setup
-#define platform_dma_init			sba_dma_init
 
 #endif /* _ASM_IA64_MACHVEC_HPZX1_h */
arch/ia64/include/asm/pci.h +0 -3
index ef91b780a3f2..8c163d1d0189 100644
@@ -69,7 +69,4 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
 	return channel ? isa_irq_to_vector(15) : isa_irq_to_vector(14);
 }
 
-#ifdef CONFIG_INTEL_IOMMU
-extern void pci_iommu_alloc(void);
-#endif
 #endif /* _ASM_IA64_PCI_H */
arch/ia64/kernel/acpi.c +0 -15
index a63e472f5317..644f34e4342e 100644
@@ -65,9 +65,6 @@ acpi_get_sysname(void)
 	struct acpi_table_rsdp *rsdp;
 	struct acpi_table_xsdt *xsdt;
 	struct acpi_table_header *hdr;
-#ifdef CONFIG_INTEL_IOMMU
-	u64 i, nentries;
-#endif
 
 	rsdp_phys = acpi_find_rsdp();
 	if (!rsdp_phys) {
@@ -98,18 +95,6 @@ acpi_get_sysname(void)
 			return "uv";
 	}
 
-#ifdef CONFIG_INTEL_IOMMU
-	/* Look for Intel IOMMU */
-	nentries = (hdr->length - sizeof(*hdr)) /
-			 sizeof(xsdt->table_offset_entry[0]);
-	for (i = 0; i < nentries; i++) {
-		hdr = __va(xsdt->table_offset_entry[i]);
-		if (strncmp(hdr->signature, ACPI_SIG_DMAR,
-			sizeof(ACPI_SIG_DMAR) - 1) = 0)
-			return "dig_vtd";
-	}
-#endif
-
 	return "dig";
 }
 #endif /* CONFIG_IA64_GENERIC */
arch/ia64/kernel/dma-mapping.c +0 -6
index 4be5ee04ccfa..53aaa8597920 100644
@@ -1,6 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <linux/dma-direct.h>
-#include <linux/swiotlb.h>
 #include <linux/export.h>
 
 /* Set this to 1 if there is a HW IOMMU in the system */
@@ -27,9 +26,4 @@ long arch_dma_coherent_to_pfn(struct device *dev, void *cpu_addr,
 {
 	return page_to_pfn(virt_to_page(cpu_addr));
 }
-
-void __init swiotlb_dma_init(void)
-{
-	swiotlb_init(1);
-}
 #endif
arch/ia64/kernel/pci-dma.c +0 -21
index fe988c49f01c..c5a8df9e77d0 100644
@@ -34,24 +34,3 @@ static int __init pci_iommu_init(void)
 
 /* Must execute after PCI subsystem */
 fs_initcall(pci_iommu_init);
-
-void __init pci_iommu_alloc(void)
-{
-	/*
-	 * The order of these functions is important for
-	 * fall-back/fail-over reasons
-	 */
-	detect_intel_iommu();
-
-#ifdef CONFIG_SWIOTLB
-	if (!iommu_detected) {
-#ifdef CONFIG_IA64_GENERIC
-		printk(KERN_INFO "PCI-DMA: Re-initialize machine vector.\n");
-		machvec_init("dig");
-		swiotlb_dma_init();
-#else
-		panic("Unable to find Intel IOMMU");
-#endif /* CONFIG_IA64_GENERIC */
-	}
-#endif /* CONFIG_SWIOTLB */
-}
arch/ia64/mm/init.c +9 -4
index 9a4a16439900..bc4d05064c25 100644
@@ -9,6 +9,7 @@
 #include <linux/init.h>
 
 #include <linux/dma-noncoherent.h>
+#include <linux/dmar.h>
 #include <linux/efi.h>
 #include <linux/elf.h>
 #include <linux/memblock.h>
@@ -23,6 +24,7 @@
 #include <linux/proc_fs.h>
 #include <linux/bitops.h>
 #include <linux/kexec.h>
+#include <linux/swiotlb.h>
 
 #include <asm/dma.h>
 #include <asm/io.h>
@@ -633,11 +635,14 @@ mem_init (void)
 	BUG_ON(PTRS_PER_PTE * sizeof(pte_t) != PAGE_SIZE);
 
 	/*
-	 * This needs to be called _after_ the command line has been parsed but _before_
-	 * any drivers that may need the PCI DMA interface are initialized or bootmem has
-	 * been freed.
+	 * This needs to be called _after_ the command line has been parsed but
+	 * _before_ any drivers that may need the PCI DMA interface are
+	 * initialized or bootmem has been freed.
 	 */
-	platform_dma_init();
+	if (IS_ENABLED(CONFIG_INTEL_IOMMU))
+		detect_intel_iommu();
+	if (!iommu_detected)
+		swiotlb_init(1);
 
 #ifdef CONFIG_FLATMEM
 	BUG_ON(!mem_map);
Signature · 1 line
2.20.1
#23 lore raw

PATCH 24/29 ia64: move the ROOT_DEV setup to common code

In reply to Christoph Hellwig

I'm not sure how useful a platform default ROOT_DEV is these days, but it pretty sure isn't machvec dependent.

---
 arch/ia64/dig/setup.c    | 9 ---------
 arch/ia64/kernel/setup.c | 9 +++++++++
 2 files changed, 9 insertions(+), 9 deletions(-)
arch/ia64/dig/setup.c +0 -9
index cc14fdce6db6..0b1866d2462a 100644
@@ -13,13 +13,11 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/kernel.h>
-#include <linux/kdev_t.h>
 #include <linux/string.h>
 #include <linux/screen_info.h>
 #include <linux/console.h>
 #include <linux/timex.h>
 #include <linux/sched.h>
-#include <linux/root_dev.h>
 
 #include <asm/io.h>
 #include <asm/machvec.h>
@@ -30,13 +28,6 @@ dig_setup (char **cmdline_p)
 {
 	unsigned int orig_x, orig_y, num_cols, num_rows, font_height;
 
-	/*
-	 * Default to /dev/sda2.  This assumes that the EFI partition
-	 * is physical disk 1 partition 1 and the Linux root disk is
-	 * physical disk 1 partition 2.
-	 */
-	ROOT_DEV = Root_SDA2;		/* default to second partition on first drive */
-
 #ifdef CONFIG_SMP
 	init_smp_config();
 #endif
arch/ia64/kernel/setup.c +9 -0
index 8d47836d932c..560f9833c665 100644
@@ -30,6 +30,7 @@
 #include <linux/console.h>
 #include <linux/delay.h>
 #include <linux/cpu.h>
+#include <linux/kdev_t.h>
 #include <linux/kernel.h>
 #include <linux/memblock.h>
 #include <linux/reboot.h>
@@ -41,6 +42,7 @@
 #include <linux/threads.h>
 #include <linux/screen_info.h>
 #include <linux/dmi.h>
+#include <linux/root_dev.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
 #include <linux/efi.h>
@@ -599,6 +601,13 @@ setup_arch (char **cmdline_p)
 	if (!nomca)
 		ia64_mca_init();
 
+	/*
+	 * Default to /dev/sda2.  This assumes that the EFI partition
+	 * is physical disk 1 partition 1 and the Linux root disk is
+	 * physical disk 1 partition 2.
+	 */
+	ROOT_DEV = Root_SDA2;		/* default to second partition on first drive */
+
 	platform_setup(cmdline_p);
 	paging_init();
 
Signature · 1 line
2.20.1
#24 lore raw

PATCH 25/29 ia64: move the screen_info setup to common code

In reply to Christoph Hellwig

There is nothing really platform specific about setting about the screen_info from the ia64_boot_param structure, so move it from the dig machvec to common code.

---
 arch/ia64/dig/setup.c    | 30 ------------------------------
 arch/ia64/kernel/setup.c | 34 ++++++++++++++++++++++++++++++++++
 2 files changed, 34 insertions(+), 30 deletions(-)
arch/ia64/dig/setup.c +0 -30
index 0b1866d2462a..ca8be4617b2e 100644
@@ -26,37 +26,7 @@
 void __init
 dig_setup (char **cmdline_p)
 {
-	unsigned int orig_x, orig_y, num_cols, num_rows, font_height;
-
 #ifdef CONFIG_SMP
 	init_smp_config();
 #endif
-
-	memset(&screen_info, 0, sizeof(screen_info));
-
-	if (!ia64_boot_param->console_info.num_rows
-	    || !ia64_boot_param->console_info.num_cols)
-	{
-		printk(KERN_WARNING "dig_setup: warning: invalid screen-info, guessing 80x25\n");
-		orig_x = 0;
-		orig_y = 0;
-		num_cols = 80;
-		num_rows = 25;
-		font_height = 16;
-	} else {
-		orig_x = ia64_boot_param->console_info.orig_x;
-		orig_y = ia64_boot_param->console_info.orig_y;
-		num_cols = ia64_boot_param->console_info.num_cols;
-		num_rows = ia64_boot_param->console_info.num_rows;
-		font_height = 400 / num_rows;
-	}
-
-	screen_info.orig_x = orig_x;
-	screen_info.orig_y = orig_y;
-	screen_info.orig_video_cols  = num_cols;
-	screen_info.orig_video_lines = num_rows;
-	screen_info.orig_video_points = font_height;
-	screen_info.orig_video_mode = 3;	/* XXX fake */
-	screen_info.orig_video_isVGA = 1;	/* XXX fake */
-	screen_info.orig_video_ega_bx = 3;	/* XXX fake */
 }
arch/ia64/kernel/setup.c +34 -0
index 560f9833c665..65d07c60f12d 100644
@@ -469,6 +469,39 @@ early_console_setup (char *cmdline)
 	return -1;
 }
 
+static void __init
+screen_info_setup(void)
+{
+	unsigned int orig_x, orig_y, num_cols, num_rows, font_height;
+
+	memset(&screen_info, 0, sizeof(screen_info));
+
+	if (!ia64_boot_param->console_info.num_rows ||
+	    !ia64_boot_param->console_info.num_cols) {
+		printk(KERN_WARNING "invalid screen-info, guessing 80x25\n");
+		orig_x = 0;
+		orig_y = 0;
+		num_cols = 80;
+		num_rows = 25;
+		font_height = 16;
+	} else {
+		orig_x = ia64_boot_param->console_info.orig_x;
+		orig_y = ia64_boot_param->console_info.orig_y;
+		num_cols = ia64_boot_param->console_info.num_cols;
+		num_rows = ia64_boot_param->console_info.num_rows;
+		font_height = 400 / num_rows;
+	}
+
+	screen_info.orig_x = orig_x;
+	screen_info.orig_y = orig_y;
+	screen_info.orig_video_cols  = num_cols;
+	screen_info.orig_video_lines = num_rows;
+	screen_info.orig_video_points = font_height;
+	screen_info.orig_video_mode = 3;	/* XXX fake */
+	screen_info.orig_video_isVGA = 1;	/* XXX fake */
+	screen_info.orig_video_ega_bx = 3;	/* XXX fake */
+}
+
 static inline void
 mark_bsp_online (void)
 {
@@ -609,6 +642,7 @@ setup_arch (char **cmdline_p)
 	ROOT_DEV = Root_SDA2;		/* default to second partition on first drive */
 
 	platform_setup(cmdline_p);
+	screen_info_setup();
 	paging_init();
 
 	clear_sched_clock_stable();
Signature · 1 line
2.20.1
#25 lore raw

PATCH 26/29 ia64: remove support for machvecs

In reply to Christoph Hellwig

The only thing remaining of the machvecs is a few checks if we are running on an SGI UV system. Replace those with the existing is_uv_system() check that has been rewritten to simply check the OEM ID directly.

That leaves us with a generic kernel that is as fast as the previous DIG/ZX1/UV kernels, but can support all hardware. Support for UV and the HP SBA IOMMU is now optional based on new config options.

---
 arch/ia64/Kconfig                     | 72 ++++++++-------------------
 arch/ia64/Kconfig.debug               |  2 +-
 arch/ia64/Makefile                    |  7 +--
 arch/ia64/configs/bigsur_defconfig    |  1 -
 arch/ia64/configs/tiger_defconfig     |  1 -
 arch/ia64/configs/zx1_defconfig       |  1 -
 arch/ia64/dig/Makefile                | 10 ----
 arch/ia64/dig/machvec.c               |  3 --
 arch/ia64/dig/setup.c                 | 32 ------------
 arch/ia64/hp/common/Makefile          |  2 +-
 arch/ia64/hp/zx1/Makefile             |  9 ----
 arch/ia64/hp/zx1/hpzx1_machvec.c      |  3 --
 arch/ia64/include/asm/acpi.h          | 16 ------
 arch/ia64/include/asm/hw_irq.h        |  5 +-
 arch/ia64/include/asm/io.h            |  1 -
 arch/ia64/include/asm/iommu.h         |  1 -
 arch/ia64/include/asm/machvec.h       | 69 -------------------------
 arch/ia64/include/asm/machvec_dig.h   | 17 -------
 arch/ia64/include/asm/machvec_hpzx1.h | 17 -------
 arch/ia64/include/asm/machvec_init.h  | 11 ----
 arch/ia64/include/asm/machvec_uv.h    | 26 ----------
 arch/ia64/include/asm/mmzone.h        | 13 ++---
 arch/ia64/include/asm/processor.h     |  2 -
 arch/ia64/include/asm/tlb.h           |  1 -
 arch/ia64/include/asm/uv/uv.h         | 23 ++++++++-
 arch/ia64/kernel/Makefile             |  4 +-
 arch/ia64/kernel/acpi.c               | 55 --------------------
 arch/ia64/kernel/iosapic.c            |  1 -
 arch/ia64/kernel/irq_ia64.c           |  5 +-
 arch/ia64/kernel/machvec.c            | 70 --------------------------
 arch/ia64/kernel/mca.c                |  1 -
 arch/ia64/kernel/mca_drv.c            |  1 -
 arch/ia64/kernel/pci-dma.c            |  1 -
 arch/ia64/kernel/setup.c              | 24 ++++-----
 arch/ia64/kernel/smp.c                |  1 -
 arch/ia64/kernel/smpboot.c            |  1 -
 arch/ia64/kernel/time.c               |  1 -
 arch/ia64/kernel/vmlinux.lds.S        | 10 ----
 arch/ia64/mm/init.c                   |  1 -
 arch/ia64/pci/fixup.c                 |  6 +--
 arch/ia64/pci/pci.c                   |  1 -
 arch/ia64/uv/kernel/Makefile          |  1 -
 arch/ia64/uv/kernel/machvec.c         | 11 ----
 arch/ia64/uv/kernel/setup.c           | 34 +++++++++++++
 drivers/acpi/Kconfig                  |  2 +-
 drivers/char/agp/Kconfig              |  4 +-
 drivers/iommu/Kconfig                 |  2 +-
 drivers/misc/Kconfig                  |  2 +-
 drivers/misc/sgi-xp/xp_uv.c           |  6 +--
 drivers/misc/sgi-xp/xpc_uv.c          | 14 +++---
 50 files changed, 116 insertions(+), 488 deletions(-)
 delete mode 100644 arch/ia64/dig/Makefile
 delete mode 100644 arch/ia64/dig/machvec.c
 delete mode 100644 arch/ia64/dig/setup.c
 delete mode 100644 arch/ia64/hp/zx1/Makefile
 delete mode 100644 arch/ia64/hp/zx1/hpzx1_machvec.c
 delete mode 100644 arch/ia64/include/asm/machvec.h
 delete mode 100644 arch/ia64/include/asm/machvec_dig.h
 delete mode 100644 arch/ia64/include/asm/machvec_hpzx1.h
 delete mode 100644 arch/ia64/include/asm/machvec_init.h
 delete mode 100644 arch/ia64/include/asm/machvec_uv.h
 delete mode 100644 arch/ia64/kernel/machvec.c
 delete mode 100644 arch/ia64/uv/kernel/machvec.c
arch/ia64/Kconfig +21 -51
index 9a8c7ec60cfc..76ed804942c9 100644
@@ -11,11 +11,13 @@ config IA64
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select ARCH_MIGHT_HAVE_PC_SERIO
 	select ACPI
+	select ACPI_NUMA
 	select ARCH_SUPPORTS_ACPI
 	select ACPI_SYSTEM_POWER_STATES_SUPPORT if ACPI
 	select ARCH_MIGHT_HAVE_ACPI_PDC if ACPI
 	select FORCE_PCI
 	select PCI_DOMAINS if PCI
+	select PCI_MSI
 	select PCI_SYSCALL if PCI
 	select HAVE_UNSTABLE_SCHED_CLOCK
 	select HAVE_EXIT_THREAD
@@ -30,8 +32,8 @@ config IA64
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_MEMBLOCK_NODE_MAP
 	select HAVE_VIRT_CPU_ACCOUNTING
-	select ARCH_HAS_DMA_COHERENT_TO_PFN if SWIOTLB
-	select ARCH_HAS_SYNC_DMA_FOR_CPU if SWIOTLB
+	select ARCH_HAS_DMA_COHERENT_TO_PFN
+	select ARCH_HAS_SYNC_DMA_FOR_CPU
 	select VIRT_TO_BUS
 	select GENERIC_IRQ_PROBE
 	select GENERIC_PENDING_IRQ if SMP
@@ -45,6 +47,7 @@ config IA64
 	select ARCH_THREAD_STACK_ALLOCATOR
 	select ARCH_CLOCKSOURCE_DATA
 	select GENERIC_TIME_VSYSCALL
+	select SWIOTLB
 	select SYSCTL_ARCH_UNALIGN_NO_WARN
 	select HAVE_MOD_ARCH_SPECIFIC
 	select MODULES_USE_ELF_RELA
@@ -52,6 +55,7 @@ config IA64
 	select HAVE_ARCH_AUDITSYSCALL
 	select NEED_DMA_MAP_STATE
 	select NEED_SG_DMA_LENGTH
+	select NUMA
 	default y
 	help
 	  The Itanium Processor Family is Intel's 64-bit successor to
@@ -119,53 +123,6 @@ config AUDIT_ARCH
 	bool
 	default y
 
-choice
-	prompt "System type"
-	default IA64_GENERIC
-
-config IA64_GENERIC
-	bool "generic"
-	select NUMA
-	select ACPI_NUMA
-	select SWIOTLB
-	select PCI_MSI
-	help
-	  This selects the system type of your hardware.  A "generic" kernel
-	  will run on any supported IA-64 system.  However, if you configure
-	  a kernel for your specific system, it will be faster and smaller.
-
-	  generic		For any supported IA-64 system
-	  DIG-compliant		For DIG ("Developer's Interface Guide") compliant systems
-	  DIG+Intel+IOMMU	For DIG systems with Intel IOMMU
-	  HP-zx1/sx1000		For HP systems
-	  SGI-UV		For SGI UV systems
-
-	  If you don't know what to do, choose "generic".
-
-config IA64_DIG
-	bool "DIG-compliant"
-	select SWIOTLB
-
-config IA64_HP_ZX1
-	bool "HP-zx1/sx1000"
-	help
-	  Build a kernel that runs on HP zx1 and sx1000 systems.  This adds
-	  support for the HP I/O MMU.
-
-config IA64_SGI_UV
-	bool "SGI-UV"
-	select NUMA
-	select ACPI_NUMA
-	select SWIOTLB
-	help
-	  Selecting this option will optimize the kernel for use on UV based
-	  systems, but the resulting kernel binary will not run on other
-	  types of ia64 systems.  If you have an SGI UV system, it's safe
-	  to select this option.  If in doubt, select ia64 generic support
-	  instead.
-
-endchoice
-
 choice
 	prompt "Processor type"
 	default ITANIUM
@@ -230,6 +187,20 @@ config IA64_L1_CACHE_SHIFT
 	default "7" if MCKINLEY
 	default "6" if ITANIUM
 
+config IA64_SGI_UV
+	bool "SGI-UV support"
+	help
+	  Selecting this option will add specific support for running on SGI
+	  UV based systems.  If you have an SGI UV system or are building a
+	  distro kernel, select this option.
+
+config IA64_HP_SBA_IOMMU
+	bool "HP SBA IOMMU support"
+	default y
+	help
+	  Say Y here to add support for the SBA IOMMU found on HP zx1 and
+	  sx1000 systems.  If you're unsure, answer Y.
+
 config IA64_CYCLONE
 	bool "Cyclone (EXA) Time Source support"
 	help
@@ -334,13 +305,12 @@ config ARCH_SPARSEMEM_ENABLE
 	select SPARSEMEM_VMEMMAP_ENABLE
 
 config ARCH_DISCONTIGMEM_DEFAULT
-	def_bool y if (IA64_GENERIC || IA64_HP_ZX1)
+	def_bool y
 	depends on ARCH_DISCONTIGMEM_ENABLE
 
 config NUMA
 	bool "NUMA support"
 	depends on !FLATMEM
-	select ACPI_NUMA if ACPI
 	help
 	  Say Y to compile the kernel to support NUMA (Non-Uniform Memory
 	  Access).  This option is for configuring high-end multiprocessor
arch/ia64/Kconfig.debug +1 -1
index abf8d04ab6ab..40ca23bd228d 100644
@@ -14,7 +14,7 @@ config IA64_GRANULE_16MB
 
 config IA64_GRANULE_64MB
 	bool "64MB"
-	depends on !(IA64_GENERIC || IA64_HP_ZX1)
+	depends on BROKEN
 
 endchoice
 
arch/ia64/Makefile +1 -6
index 172dd884b4d7..6eaa0ffd15ca 100644
@@ -44,14 +44,9 @@ head-y := arch/ia64/kernel/head.o
 
 libs-y				+= arch/ia64/lib/
 core-y				+= arch/ia64/kernel/ arch/ia64/mm/
-core-$(CONFIG_IA64_DIG) 	+= arch/ia64/dig/
-core-$(CONFIG_IA64_GENERIC) 	+= arch/ia64/dig/
-core-$(CONFIG_IA64_HP_ZX1)	+= arch/ia64/dig/
 core-$(CONFIG_IA64_SGI_UV)	+= arch/ia64/uv/
 
-drivers-y			+= arch/ia64/pci/
-drivers-$(CONFIG_IA64_HP_ZX1)	+= arch/ia64/hp/common/ arch/ia64/hp/zx1/
-drivers-$(CONFIG_IA64_GENERIC)	+= arch/ia64/hp/common/ arch/ia64/hp/zx1/ arch/ia64/uv/
+drivers-y			+= arch/ia64/pci/ arch/ia64/hp/common/
 drivers-$(CONFIG_OPROFILE)	+= arch/ia64/oprofile/
 
 PHONY += compressed check
arch/ia64/configs/bigsur_defconfig +0 -1
index b6bda1838629..b630bd7351c4 100644
@@ -7,7 +7,6 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_SGI_PARTITION=y
-CONFIG_IA64_DIG=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_PREEMPT=y
arch/ia64/configs/tiger_defconfig +0 -1
index 192ed157c9ce..1d6e2a01452b 100644
@@ -12,7 +12,6 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_SGI_PARTITION=y
-CONFIG_IA64_DIG=y
 CONFIG_MCKINLEY=y
 CONFIG_IA64_PAGE_SIZE_64KB=y
 CONFIG_IA64_CYCLONE=y
arch/ia64/configs/zx1_defconfig +0 -1
index b504c8e2fd52..8c92e095f8bb 100644
@@ -4,7 +4,6 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_PARTITION_ADVANCED=y
-CONFIG_IA64_HP_ZX1=y
 CONFIG_MCKINLEY=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS
arch/ia64/dig/Makefile deleted +0 -10
deleted file mode 100644
index 5c2f638c31f4..000000000000
@@ -1,10 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# ia64/platform/dig/Makefile
-#
-# Copyright (C) 1999 Silicon Graphics, Inc.
-# Copyright (C) Srinivasa Thirumalachar ([email protected])
-#
-
-obj-y := setup.o
-obj-$(CONFIG_IA64_GENERIC) += machvec.o
arch/ia64/dig/machvec.c deleted +0 -3
deleted file mode 100644
index 0c55bdafb473..000000000000
@@ -1,3 +0,0 @@
-#define MACHVEC_PLATFORM_NAME		dig
-#define MACHVEC_PLATFORM_HEADER		<asm/machvec_dig.h>
-#include <asm/machvec_init.h>
arch/ia64/dig/setup.c deleted +0 -32
deleted file mode 100644
index ca8be4617b2e..000000000000
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Platform dependent support for DIG64 platforms.
- *
- * Copyright (C) 1999 Intel Corp.
- * Copyright (C) 1999, 2001 Hewlett-Packard Co
- * Copyright (C) 1999, 2001, 2003 David Mosberger-Tang <[email protected]>
- * Copyright (C) 1999 VA Linux Systems
- * Copyright (C) 1999 Walt Drummond <[email protected]>
- * Copyright (C) 1999 Vijay Chander <[email protected]>
- */
-
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/screen_info.h>
-#include <linux/console.h>
-#include <linux/timex.h>
-#include <linux/sched.h>
-
-#include <asm/io.h>
-#include <asm/machvec.h>
-#include <asm/setup.h>
-
-void __init
-dig_setup (char **cmdline_p)
-{
-#ifdef CONFIG_SMP
-	init_smp_config();
-#endif
-}
arch/ia64/hp/common/Makefile +1 -1
index 47c8f6ecb6f4..11a56ed38229 100644
@@ -6,5 +6,5 @@
 # Copyright (C) Alex Williamson ([email protected])
 #
 
-obj-y := sba_iommu.o
+obj-$(CONFIG_IA64_HP_SBA_IOMMU) += sba_iommu.o
 obj-$(CONFIG_IA64_HP_AML_NFW) += aml_nfw.o
arch/ia64/hp/zx1/Makefile deleted +0 -9
deleted file mode 100644
index bea44b4ed173..000000000000
@@ -1,9 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# ia64/hp/zx1/Makefile
-#
-# Copyright (C) 2002 Hewlett Packard
-# Copyright (C) Alex Williamson ([email protected])
-#
-
-obj-$(CONFIG_IA64_GENERIC) += hpzx1_machvec.o
arch/ia64/hp/zx1/hpzx1_machvec.c deleted +0 -3
deleted file mode 100644
index 32518b0f923e..000000000000
@@ -1,3 +0,0 @@
-#define MACHVEC_PLATFORM_NAME		hpzx1
-#define MACHVEC_PLATFORM_HEADER		<asm/machvec_hpzx1.h>
-#include <asm/machvec_init.h>
arch/ia64/include/asm/acpi.h +0 -16
index be6bf3e499a6..f886d4dc9d55 100644
@@ -32,22 +32,6 @@ static inline bool acpi_has_cpu_in_madt(void)
 #define acpi_processor_cstate_check(x) (x) /* no idle limits on IA64 :) */
 static inline void disable_acpi(void) { }
 
-#ifdef CONFIG_IA64_GENERIC
-const char *acpi_get_sysname (void);
-#else
-static inline const char *acpi_get_sysname (void)
-{
-# if defined (CONFIG_IA64_HP_ZX1)
-	return "hpzx1";
-# elif defined (CONFIG_IA64_SGI_UV)
-	return "uv";
-# elif defined (CONFIG_IA64_DIG)
-	return "dig";
-# else
-#	error Unknown platform.  Fix acpi.c.
-# endif
-}
-#endif
 int acpi_request_vector (u32 int_type);
 int acpi_gsi_to_irq (u32 gsi, unsigned int *irq);
 
arch/ia64/include/asm/hw_irq.h +2 -3
index 12808111a767..e6385c7bdeb0 100644
@@ -12,7 +12,6 @@
 #include <linux/types.h>
 #include <linux/profile.h>
 
-#include <asm/machvec.h>
 #include <asm/ptrace.h>
 #include <asm/smp.h>
 
@@ -56,7 +55,7 @@ typedef u8 ia64_vector;
 extern int ia64_first_device_vector;
 extern int ia64_last_device_vector;
 
-#if defined(CONFIG_SMP) && (defined(CONFIG_IA64_GENERIC) || defined (CONFIG_IA64_DIG))
+#ifdef CONFIG_SMP
 /* Reserve the lower priority vector than device vectors for "move IRQ" IPI */
 #define IA64_IRQ_MOVE_VECTOR		0x30	/* "move IRQ" IPI */
 #define IA64_DEF_FIRST_DEVICE_VECTOR	0x31
@@ -127,7 +126,7 @@ extern void ia64_send_ipi (int cpu, int vector, int delivery_mode, int redirect)
 extern void ia64_native_register_percpu_irq (ia64_vector vec, struct irqaction *action);
 extern void destroy_and_reserve_irq (unsigned int irq);
 
-#if defined(CONFIG_SMP) && (defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_DIG))
+#ifdef CONFIG_SMP
 extern int irq_prepare_move(int irq, int cpu);
 extern void irq_complete_move(unsigned int irq);
 #else
arch/ia64/include/asm/io.h +0 -1
index edd5c262d360..54e70c21352a 100644
@@ -71,7 +71,6 @@ extern unsigned int num_io_spaces;
 #define HAVE_ARCH_PIO_SIZE
 
 #include <asm/intrinsics.h>
-#include <asm/machvec.h>
 #include <asm/page.h>
 #include <asm-generic/iomap.h>
 
arch/ia64/include/asm/iommu.h +0 -1
index 7429a72f3f92..679854fbdfc5 100644
@@ -15,6 +15,5 @@ extern int iommu_detected;
 #define no_iommu		(1)
 #define iommu_detected		(0)
 #endif
-extern void machvec_init(const char *name);
 
 #endif
arch/ia64/include/asm/machvec.h deleted +0 -69

69 lines not on this page · raw message

arch/ia64/include/asm/machvec_dig.h deleted +0 -17
deleted file mode 100644
index bc230f69faeb..000000000000
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_IA64_MACHVEC_DIG_h
-#define _ASM_IA64_MACHVEC_DIG_h
-
-extern ia64_mv_setup_t dig_setup;
-
-/*
- * This stuff has dual use!
- *
- * For a generic kernel, the macros are used to initialize the
- * platform's machvec structure.  When compiling a non-generic kernel,
- * the macros are used directly.
- */
-#define ia64_platform_name	"dig"
-#define platform_setup		dig_setup
-
-#endif /* _ASM_IA64_MACHVEC_DIG_h */
arch/ia64/include/asm/machvec_hpzx1.h deleted +0 -17
deleted file mode 100644
index 7d37998ffdbf..000000000000
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_IA64_MACHVEC_HPZX1_h
-#define _ASM_IA64_MACHVEC_HPZX1_h
-
-extern ia64_mv_setup_t			dig_setup;
-
-/*
- * This stuff has dual use!
- *
- * For a generic kernel, the macros are used to initialize the
- * platform's machvec structure.  When compiling a non-generic kernel,
- * the macros are used directly.
- */
-#define ia64_platform_name			"hpzx1"
-#define platform_setup				dig_setup
-
-#endif /* _ASM_IA64_MACHVEC_HPZX1_h */
arch/ia64/include/asm/machvec_init.h deleted +0 -11
deleted file mode 100644
index 7a82e3ea0aff..000000000000
@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <asm/iommu.h>
-#include <asm/machvec.h>
-
-#define MACHVEC_HELPER(name)									\
- struct ia64_machine_vector machvec_##name __attribute__ ((unused, __section__ (".machvec")))	\
-	= MACHVEC_INIT(name);
-
-#define MACHVEC_DEFINE(name)	MACHVEC_HELPER(name)
-
-MACHVEC_DEFINE(MACHVEC_PLATFORM_NAME)
arch/ia64/include/asm/machvec_uv.h deleted +0 -26
deleted file mode 100644
index 2c50853f35ac..000000000000
@@ -1,26 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * SGI UV Core Functions
- *
- * Copyright (C) 2008 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef _ASM_IA64_MACHVEC_UV_H
-#define _ASM_IA64_MACHVEC_UV_H
-
-extern ia64_mv_setup_t uv_setup;
-
-/*
- * This stuff has dual use!
- *
- * For a generic kernel, the macros are used to initialize the
- * platform's machvec structure.  When compiling a non-generic kernel,
- * the macros are used directly.
- */
-#define ia64_platform_name		"uv"
-#define platform_setup			uv_setup
-
-#endif /* _ASM_IA64_MACHVEC_UV_H */
arch/ia64/include/asm/mmzone.h +3 -10
index e5f461fd6a58..767201f66c93 100644
@@ -27,16 +27,9 @@ static inline int pfn_to_nid(unsigned long pfn)
 		return nid;
 }
 
-#ifdef CONFIG_IA64_DIG /* DIG systems are small */
-# define MAX_PHYSNODE_ID	8
-# define NR_NODE_MEMBLKS	(MAX_NUMNODES * 8)
-#else 
-# define MAX_PHYSNODE_ID	2048
-# define NR_NODE_MEMBLKS	(MAX_NUMNODES * 4)
-#endif
-
-#else /* CONFIG_NUMA */
-# define NR_NODE_MEMBLKS	(MAX_NUMNODES * 4)
+#define MAX_PHYSNODE_ID		2048
 #endif /* CONFIG_NUMA */
 
+#define NR_NODE_MEMBLKS		(MAX_NUMNODES * 4)
+
 #endif /* _ASM_IA64_MMZONE_H */
arch/ia64/include/asm/processor.h +0 -2
index c91ef98ed6bf..95a2ec37400f 100644
@@ -679,8 +679,6 @@ enum idle_boot_override {IDLE_NO_OVERRIDE=0, IDLE_HALT, IDLE_FORCE_MWAIT,
 
 void default_idle(void);
 
-#define ia64_platform_is(x) (strcmp(x, ia64_platform_name) = 0)
-
 #endif /* !__ASSEMBLY__ */
 
 #endif /* _ASM_IA64_PROCESSOR_H */
arch/ia64/include/asm/tlb.h +0 -1
index 86ec034ba499..f1f257d632b3 100644
@@ -45,7 +45,6 @@
 #include <asm/pgalloc.h>
 #include <asm/processor.h>
 #include <asm/tlbflush.h>
-#include <asm/machvec.h>
 
 #include <asm-generic/tlb.h>
 
arch/ia64/include/asm/uv/uv.h +21 -2
index 502cf1c56369..48d4526bf4cd 100644
@@ -2,10 +2,29 @@
 #ifndef _ASM_IA64_UV_UV_H
 #define _ASM_IA64_UV_UV_H
 
+#ifdef CONFIG_IA64_SGI_UV
+extern bool ia64_is_uv;
+
+static inline int is_uv_system(void)
+{
+	return ia64_is_uv;
+}
+
+void __init uv_probe_system_type(void);
+void __init uv_setup(char **cmdline_p);
+#else /* CONFIG_IA64_SGI_UV */
 static inline int is_uv_system(void)
 {
-	/* temporary support for running on hardware simulator */
-	return ia64_platform_is("uv");
+	return false;
+}
+
+static inline void __init uv_probe_system_type(void)
+{
+}
+
+static inline void __init uv_setup(char **cmdline_p)
+{
 }
+#endif /* CONFIG_IA64_SGI_UV */
 
 #endif	/* _ASM_IA64_UV_UV_H */
arch/ia64/kernel/Makefile +2 -2
index dbde36702cf2..1a8df6669eee 100644
@@ -10,7 +10,7 @@ endif
 extra-y	:= head.o vmlinux.lds
 
 obj-y := entry.o efi.o efi_stub.o gate-data.o fsys.o ia64_ksyms.o irq.o irq_ia64.o	\
-	 irq_lsapic.o ivt.o machvec.o pal.o patch.o process.o perfmon.o ptrace.o sal.o		\
+	 irq_lsapic.o ivt.o pal.o patch.o process.o perfmon.o ptrace.o sal.o		\
 	 salinfo.o setup.o signal.o sys_ia64.o time.o traps.o unaligned.o \
 	 unwind.o mca.o mca_asm.o topology.o dma-mapping.o iosapic.o acpi.o \
 	 acpi-ext.o
@@ -30,7 +30,7 @@ obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o crash.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
 obj-$(CONFIG_IA64_UNCACHED_ALLOCATOR)	+= uncached.o
 obj-$(CONFIG_AUDIT)		+= audit.o
-obj-$(CONFIG_PCI_MSI)		+= msi_ia64.o
+obj-y				+= msi_ia64.o
 mca_recovery-y			+= mca_drv.o mca_drv_asm.o
 obj-$(CONFIG_IA64_MC_ERR_INJECT)+= err_inject.o
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
arch/ia64/kernel/acpi.c +0 -55

67 lines not on this page · raw message

arch/ia64/kernel/iosapic.c +0 -1
index 2d25958a7ed7..fad4db20ce65 100644
@@ -93,7 +93,6 @@
 #include <asm/hw_irq.h>
 #include <asm/io.h>
 #include <asm/iosapic.h>
-#include <asm/machvec.h>
 #include <asm/processor.h>
 #include <asm/ptrace.h>
 
arch/ia64/kernel/irq_ia64.c +1 -4
index b989731bbeac..f10208478131 100644
@@ -37,7 +37,6 @@
 #include <asm/intrinsics.h>
 #include <asm/io.h>
 #include <asm/hw_irq.h>
-#include <asm/machvec.h>
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
 
@@ -249,7 +248,7 @@ void __setup_vector_irq(int cpu)
 	}
 }
 
-#if defined(CONFIG_SMP) && (defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_DIG))
+#ifdef CONFIG_SMP
 
 static enum vector_domain_type {
 	VECTOR_DOMAIN_NONE,
@@ -637,11 +636,9 @@ init_IRQ (void)
 	ia64_register_ipi();
 	register_percpu_irq(IA64_SPURIOUS_INT_VECTOR, NULL);
 #ifdef CONFIG_SMP
-#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_DIG)
 	if (vector_domain_type != VECTOR_DOMAIN_NONE)
 		register_percpu_irq(IA64_IRQ_MOVE_VECTOR, &irq_move_irqaction);
 #endif
-#endif
 #ifdef CONFIG_PERFMON
 	pfm_init_percpu();
 #endif
arch/ia64/kernel/machvec.c deleted +0 -70

70 lines not on this page · raw message

arch/ia64/kernel/mca.c +0 -1
index a7f05883935b..bf2cb9294795 100644
@@ -91,7 +91,6 @@
 #include <linux/gfp.h>
 
 #include <asm/delay.h>
-#include <asm/machvec.h>
 #include <asm/meminit.h>
 #include <asm/page.h>
 #include <asm/ptrace.h>
arch/ia64/kernel/mca_drv.c +0 -1
index cd7972ede1d6..4d0ab323dee8 100644
@@ -26,7 +26,6 @@
 #include <linux/slab.h>
 
 #include <asm/delay.h>
-#include <asm/machvec.h>
 #include <asm/page.h>
 #include <asm/ptrace.h>
 #include <asm/sal.h>
arch/ia64/kernel/pci-dma.c +0 -1
index c5a8df9e77d0..7885b4a22a59 100644
@@ -10,7 +10,6 @@
 #include <linux/module.h>
 #include <linux/dmar.h>
 #include <asm/iommu.h>
-#include <asm/machvec.h>
 #include <linux/dma-mapping.h>
 #include <linux/kernel.h>
 #include <asm/page.h>
arch/ia64/kernel/setup.c +12 -12
index 65d07c60f12d..18de565d5825 100644
@@ -52,7 +52,6 @@
 #include <linux/kexec.h>
 #include <linux/crash_dump.h>
 
-#include <asm/machvec.h>
 #include <asm/mca.h>
 #include <asm/meminit.h>
 #include <asm/page.h>
@@ -65,11 +64,14 @@
 #include <asm/smp.h>
 #include <asm/tlbflush.h>
 #include <asm/unistd.h>
+#include <asm/uv/uv.h>
 
 #if defined(CONFIG_SMP) && (IA64_CPU_SIZE > PAGE_SIZE)
 # error "struct cpuinfo_ia64 too big!"
 #endif
 
+char ia64_platform_name[64];
+
 #ifdef CONFIG_SMP
 unsigned long __per_cpu_offset[NR_CPUS];
 EXPORT_SYMBOL(__per_cpu_offset);
@@ -265,7 +267,7 @@ __initcall(register_memory);
  */
 static int __init check_crashkernel_memory(unsigned long pbase, size_t size)
 {
-	if (ia64_platform_is("uv"))
+	if (is_uv_system())
 		return 1;
 	else
 		return pbase < (1UL << 32);
@@ -558,15 +560,7 @@ setup_arch (char **cmdline_p)
 	efi_init();
 	io_port_init();
 
-#ifdef CONFIG_IA64_GENERIC
-	/* machvec needs to be parsed from the command line
-	 * before parse_early_param() is called to ensure
-	 * that ia64_mv is initialised before any command line
-	 * settings may cause console setup to occur
-	 */
-	machvec_init_from_cmdline(*cmdline_p);
-#endif
-
+	uv_probe_system_type();
 	parse_early_param();
 
 	if (early_console_setup(*cmdline_p) = 0)
@@ -641,7 +635,13 @@ setup_arch (char **cmdline_p)
 	 */
 	ROOT_DEV = Root_SDA2;		/* default to second partition on first drive */
 
-	platform_setup(cmdline_p);
+	if (is_uv_system())
+		uv_setup(cmdline_p);
+#ifdef CONFIG_SMP
+	else
+		init_smp_config();
+#endif
+
 	screen_info_setup();
 	paging_init();
 
arch/ia64/kernel/smp.c +0 -1
index 4825b0b41d49..de35c54f033d 100644
@@ -36,7 +36,6 @@
 #include <linux/atomic.h>
 #include <asm/current.h>
 #include <asm/delay.h>
-#include <asm/machvec.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/page.h>
arch/ia64/kernel/smpboot.c +0 -1
index f7058659526c..6501d9a9a21b 100644
@@ -47,7 +47,6 @@
 #include <asm/delay.h>
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/machvec.h>
 #include <asm/mca.h>
 #include <asm/page.h>
 #include <asm/pgalloc.h>
arch/ia64/kernel/time.c +0 -1
index d9ad93a6d825..1e95d32c8877 100644
@@ -25,7 +25,6 @@
 #include <linux/platform_device.h>
 #include <linux/sched/cputime.h>
 
-#include <asm/machvec.h>
 #include <asm/delay.h>
 #include <asm/hw_irq.h>
 #include <asm/ptrace.h>
arch/ia64/kernel/vmlinux.lds.S +0 -10
index 0da58cf8e213..d9d4e21107cd 100644
@@ -141,16 +141,6 @@ SECTIONS {
 		__end___mckinley_e9_bundles = .;
 	}
 
-#if defined(CONFIG_IA64_GENERIC)
-	/* Machine Vector */
-	. = ALIGN(16);
-	.machvec : AT(ADDR(.machvec) - LOAD_OFFSET) {
-		machvec_start = .;
-		*(.machvec)
-		machvec_end = .;
-	}
-#endif
-
 #ifdef	CONFIG_SMP
 	. = ALIGN(PERCPU_PAGE_SIZE);
 	__cpu0_per_cpu = .;
arch/ia64/mm/init.c +0 -1
index bc4d05064c25..f351dec62ca5 100644
@@ -28,7 +28,6 @@
 
 #include <asm/dma.h>
 #include <asm/io.h>
-#include <asm/machvec.h>
 #include <asm/numa.h>
 #include <asm/patch.h>
 #include <asm/pgalloc.h>
arch/ia64/pci/fixup.c +2 -4
index e1fa45b2148c..acb55a41260d 100644
@@ -8,8 +8,7 @@
 #include <linux/init.h>
 #include <linux/vgaarb.h>
 #include <linux/screen_info.h>
-
-#include <asm/machvec.h>
+#include <asm/uv/uv.h>
 
 /*
  * Fixup to mark boot BIOS video selected by BIOS before it changes
@@ -35,8 +34,7 @@ static void pci_fixup_video(struct pci_dev *pdev)
 	u16 config;
 	struct resource *res;
 
-	if ((strcmp(ia64_platform_name, "dig") != 0)
-	    && (strcmp(ia64_platform_name, "hpzx1")  != 0))
+	if (is_uv_system())
 		return;
 	/* Maybe, this machine supports legacy memory map. */
 
arch/ia64/pci/pci.c +0 -1
index 89c9f36dc94d..211757e34198 100644
@@ -24,7 +24,6 @@
 #include <linux/memblock.h>
 #include <linux/export.h>
 
-#include <asm/machvec.h>
 #include <asm/page.h>
 #include <asm/io.h>
 #include <asm/sal.h>
arch/ia64/uv/kernel/Makefile +0 -1
index 124e441d383d..297196578d19 100644
@@ -10,4 +10,3 @@
 ccflags-y := -Iarch/ia64/sn/include
 
 obj-y				+= setup.o
-obj-$(CONFIG_IA64_GENERIC)      += machvec.o
arch/ia64/uv/kernel/machvec.c deleted +0 -11
deleted file mode 100644
index 50737a9dca74..000000000000
@@ -1,11 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
- */
-
-#define MACHVEC_PLATFORM_NAME	uv
-#define MACHVEC_PLATFORM_HEADER	<asm/machvec_uv.h>
-#include <asm/machvec_init.h>
arch/ia64/uv/kernel/setup.c +34 -0
index b081f5138f5c..bb025486d791 100644
@@ -8,11 +8,17 @@
  * Copyright (C) 2008 Silicon Graphics, Inc. All rights reserved.
  */
 
+#include <linux/acpi.h>
+#include <linux/efi.h>
 #include <linux/module.h>
 #include <linux/percpu.h>
+#include <asm/uv/uv.h>
 #include <asm/uv/uv_mmrs.h>
 #include <asm/uv/uv_hub.h>
 
+bool ia64_is_uv;
+EXPORT_SYMBOL_GPL(ia64_is_uv);
+
 DEFINE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
 EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info);
 
@@ -47,6 +53,34 @@ static __init void get_lowmem_redirect(unsigned long *base, unsigned long *size)
 	BUG();
 }
 
+void __init uv_probe_system_type(void)
+{
+	struct acpi_table_rsdp *rsdp;
+	struct acpi_table_xsdt *xsdt;
+
+	if (efi.acpi20 = EFI_INVALID_TABLE_ADDR) {
+		pr_err("ACPI 2.0 RSDP not found.\n");
+		return;
+	}
+
+	rsdp = (struct acpi_table_rsdp *)__va(efi.acpi20);
+	if (strncmp(rsdp->signature, ACPI_SIG_RSDP, sizeof(ACPI_SIG_RSDP) - 1)) {
+		pr_err("ACPI 2.0 RSDP signature incorrect.\n");
+		return;
+	}
+
+	xsdt = (struct acpi_table_xsdt *)__va(rsdp->xsdt_physical_address);
+	if (strncmp(xsdt->header.signature, ACPI_SIG_XSDT,
+			sizeof(ACPI_SIG_XSDT) - 1)) {
+		pr_err("ACPI 2.0 XSDT signature incorrect.\n");
+		return;
+	}
+
+	if (!strcmp(xsdt->header.oem_id, "SGI") &&
+	    !strcmp(xsdt->header.oem_table_id + 4, "UV"))
+		ia64_is_uv = true;
+}
+
 void __init uv_setup(char **cmdline_p)
 {
 	union uvh_si_addr_map_config_u m_n_config;
drivers/acpi/Kconfig +1 -1
index 06a16dc5cfb5..ebe1e9e5fd81 100644
@@ -323,7 +323,7 @@ config ACPI_NUMA
 	bool "NUMA support"
 	depends on NUMA
 	depends on (X86 || IA64 || ARM64)
-	default y if IA64_GENERIC || ARM64
+	default y if IA64 || ARM64
 
 config ACPI_CUSTOM_DSDT_FILE
 	string "Custom DSDT Table file to include"
drivers/char/agp/Kconfig +2 -2
index 42d45e97c2ae..812d6aa6e013 100644
@@ -111,14 +111,14 @@ config AGP_VIA
 
 config AGP_I460
 	tristate "Intel 460GX chipset support"
-	depends on AGP && (IA64_DIG || IA64_GENERIC)
+	depends on AGP && IA64
 	help
 	  This option gives you AGP GART support for the Intel 460GX chipset
 	  for IA64 processors.
 
 config AGP_HP_ZX1
 	tristate "HP ZX1 chipset AGP support"
-	depends on AGP && (IA64_HP_ZX1 || IA64_GENERIC)
+	depends on AGP && IA64
 	help
 	  This option gives you AGP GART support for the HP ZX1 chipset
 	  for IA64 processors.
drivers/iommu/Kconfig +1 -1
index e15cdcd8cb3c..9a618459d067 100644
@@ -177,7 +177,7 @@ config DMAR_TABLE
 
 config INTEL_IOMMU
 	bool "Support for Intel IOMMU using DMA Remapping Devices"
-	depends on PCI_MSI && ACPI && (X86 || IA64_GENERIC)
+	depends on PCI_MSI && ACPI && (X86 || IA64)
 	select IOMMU_API
 	select IOMMU_IOVA
 	select NEED_DMA_MAP_STATE
drivers/misc/Kconfig +1 -1
index 423d2d26d8f7..4ef2b751410c 100644
@@ -188,7 +188,7 @@ config ENCLOSURE_SERVICES
 config SGI_XP
 	tristate "Support communication between SGI SSIs"
 	depends on NET
-	depends on (IA64_GENERIC || IA64_SGI_UV || X86_UV) && SMP
+	depends on (IA64_SGI_UV || X86_UV) && SMP
 	depends on X86_64 || BROKEN
 	select SGI_GRU if X86_64 && SMP
 	---help---
drivers/misc/sgi-xp/xp_uv.c +3 -3
index 5e335e93459c..c4a50baa16c2 100644
@@ -17,7 +17,7 @@
 #include <asm/uv/uv_hub.h>
 #if defined CONFIG_X86_64
 #include <asm/uv/bios.h>
-#elif defined CONFIG_IA64_GENERIC || defined CONFIG_IA64_SGI_UV
+#elif defined CONFIG_IA64_SGI_UV
 #include <asm/sn/sn_sal.h>
 #endif
 #include "../sgi-gru/grukservices.h"
@@ -99,7 +99,7 @@ xp_expand_memprotect_uv(unsigned long phys_addr, unsigned long size)
 		return xpBiosError;
 	}
 
-#elif defined CONFIG_IA64_GENERIC || defined CONFIG_IA64_SGI_UV
+#elif defined defined CONFIG_IA64_SGI_UV
 	u64 nasid_array;
 
 	ret = sn_change_memprotect(phys_addr, size, SN_MEMPROT_ACCESS_CLASS_1,
@@ -129,7 +129,7 @@ xp_restrict_memprotect_uv(unsigned long phys_addr, unsigned long size)
 		return xpBiosError;
 	}
 
-#elif defined CONFIG_IA64_GENERIC || defined CONFIG_IA64_SGI_UV
+#elif defined CONFIG_IA64_SGI_UV
 	u64 nasid_array;
 
 	ret = sn_change_memprotect(phys_addr, size, SN_MEMPROT_ACCESS_CLASS_0,
drivers/misc/sgi-xp/xpc_uv.c +7 -7
index d8a6fe16e4f5..e254bca9f074 100644
@@ -27,7 +27,7 @@
 #if defined CONFIG_X86_64
 #include <asm/uv/bios.h>
 #include <asm/uv/uv_irq.h>
-#elif defined CONFIG_IA64_GENERIC || defined CONFIG_IA64_SGI_UV
+#elif defined defined CONFIG_IA64_SGI_UV
 #include <asm/sn/intr.h>
 #include <asm/sn/sn_sal.h>
 #endif
@@ -35,7 +35,7 @@
 #include "../sgi-gru/grukservices.h"
 #include "xpc.h"
 
-#if defined CONFIG_IA64_GENERIC || defined CONFIG_IA64_SGI_UV
+#if defined defined CONFIG_IA64_SGI_UV
 struct uv_IO_APIC_route_entry {
 	__u64	vector		:  8,
 		delivery_mode	:  3,
@@ -121,7 +121,7 @@ xpc_get_gru_mq_irq_uv(struct xpc_gru_mq_uv *mq, int cpu, char *irq_name)
 
 	mq->mmr_value = uv_read_global_mmr64(mmr_pnode, mq->mmr_offset);
 
-#elif defined CONFIG_IA64_GENERIC || defined CONFIG_IA64_SGI_UV
+#elif defined defined CONFIG_IA64_SGI_UV
 	if (strcmp(irq_name, XPC_ACTIVATE_IRQ_NAME) = 0)
 		mq->irq = SGI_XPC_ACTIVATE;
 	else if (strcmp(irq_name, XPC_NOTIFY_IRQ_NAME) = 0)
@@ -144,7 +144,7 @@ xpc_release_gru_mq_irq_uv(struct xpc_gru_mq_uv *mq)
 #if defined CONFIG_X86_64
 	uv_teardown_irq(mq->irq);
 
-#elif defined CONFIG_IA64_GENERIC || defined CONFIG_IA64_SGI_UV
+#elif defined defined CONFIG_IA64_SGI_UV
 	int mmr_pnode;
 	unsigned long mmr_value;
 
@@ -162,7 +162,7 @@ xpc_gru_mq_watchlist_alloc_uv(struct xpc_gru_mq_uv *mq)
 {
 	int ret;
 
-#if defined CONFIG_IA64_GENERIC || defined CONFIG_IA64_SGI_UV
+#if defined defined CONFIG_IA64_SGI_UV
 	int mmr_pnode = uv_blade_to_pnode(mq->mmr_blade);
 
 	ret = sn_mq_watchlist_alloc(mmr_pnode, (void *)uv_gpa(mq->address),
@@ -197,7 +197,7 @@ xpc_gru_mq_watchlist_free_uv(struct xpc_gru_mq_uv *mq)
 #if defined CONFIG_X86_64
 	ret = uv_bios_mq_watchlist_free(mmr_pnode, mq->watchlist_num);
 	BUG_ON(ret != BIOS_STATUS_SUCCESS);
-#elif defined CONFIG_IA64_GENERIC || defined CONFIG_IA64_SGI_UV
+#elif defined CONFIG_IA64_SGI_UV
 	ret = sn_mq_watchlist_free(mmr_pnode, mq->watchlist_num);
 	BUG_ON(ret != SALRET_OK);
 #else
@@ -796,7 +796,7 @@ xpc_get_partition_rsvd_page_pa_uv(void *buf, u64 *cookie, unsigned long *rp_pa,
 	else
 		ret = xpBiosError;
 
-#elif defined CONFIG_IA64_GENERIC || defined CONFIG_IA64_SGI_UV
+#elif defined defined CONFIG_IA64_SGI_UV
 	status = sn_partition_reserved_page_pa((u64)buf, cookie, rp_pa, len);
 	if (status = SALRET_OK)
 		ret = xpSuccess;
Signature · 1 line
2.20.1
#26 lore raw

PATCH 27/29 ia64: remove CONFIG_SWIOTLB ifdefs

In reply to Christoph Hellwig

CONFIG_SWIOTLB is now unconditionally selected on ia64, so remove the ifdefs.

---
 arch/ia64/kernel/dma-mapping.c | 2 --
 arch/ia64/mm/init.c            | 2 --
 2 files changed, 4 deletions(-)
arch/ia64/kernel/dma-mapping.c +0 -2
index 53aaa8597920..4a3262795890 100644
@@ -8,7 +8,6 @@ int iommu_detected __read_mostly;
 const struct dma_map_ops *dma_ops;
 EXPORT_SYMBOL(dma_ops);
 
-#ifdef CONFIG_SWIOTLB
 void *arch_dma_alloc(struct device *dev, size_t size,
 		dma_addr_t *dma_handle, gfp_t gfp, unsigned long attrs)
 {
@@ -26,4 +25,3 @@ long arch_dma_coherent_to_pfn(struct device *dev, void *cpu_addr,
 {
 	return page_to_pfn(virt_to_page(cpu_addr));
 }
-#endif
arch/ia64/mm/init.c +0 -2
index f351dec62ca5..f6928637298e 100644
@@ -68,7 +68,6 @@ __ia64_sync_icache_dcache (pte_t pte)
 	set_bit(PG_arch_1, &page->flags);	/* mark page as clean */
 }
 
-#ifdef CONFIG_SWIOTLB
 /*
  * Since DMA is i-cache coherent, any (complete) pages that were written via
  * DMA can be marked as "clean" so that lazy_mmu_prot_update() doesn't have to
@@ -83,7 +82,6 @@ void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr,
 		set_bit(PG_arch_1, &pfn_to_page(pfn)->flags);
 	} while (++pfn <= PHYS_PFN(paddr + size - 1));
 }
-#endif
 
 inline void
 ia64_set_rbs_bot (void)
Signature · 1 line
2.20.1
#27 lore raw

PATCH 28/29 ia64: remove CONFIG_ACPI_NUMA ifdefs

In reply to Christoph Hellwig

CONFIG_ACPI_NUMA is now unconditionally selected on ia64, so remove the ifdefs.

---
 arch/ia64/include/asm/acpi.h |  5 -----
 arch/ia64/kernel/acpi.c      | 17 -----------------
 arch/ia64/kernel/setup.c     |  2 --
 3 files changed, 24 deletions(-)
arch/ia64/include/asm/acpi.h +0 -5
index f886d4dc9d55..9598f998a94f 100644
@@ -55,7 +55,6 @@ extern int additional_cpus;
 #define additional_cpus 0
 #endif
 
-#ifdef CONFIG_ACPI_NUMA
 #if MAX_NUMNODES > 256
 #define MAX_PXM_DOMAINS MAX_NUMNODES
 #else
@@ -63,7 +62,6 @@ extern int additional_cpus;
 #endif
 extern int pxm_to_nid_map[MAX_PXM_DOMAINS];
 extern int __initdata nid_to_pxm_map[MAX_NUMNODES];
-#endif
 
 static inline bool arch_has_acpi_pdc(void) { return true; }
 static inline void arch_acpi_set_pdc_bits(u32 *buf)
@@ -73,7 +71,6 @@ static inline void arch_acpi_set_pdc_bits(u32 *buf)
 
 #define acpi_unlazy_tlb(x)
 
-#ifdef CONFIG_ACPI_NUMA
 extern cpumask_t early_cpu_possible_map;
 #define for_each_possible_early_cpu(cpu)  \
 	for_each_cpu((cpu), &early_cpu_possible_map)
@@ -102,8 +99,6 @@ static inline void per_cpu_scan_finalize(int min_cpus, int reserve_cpus)
 
 extern void acpi_numa_fixup(void);
 
-#endif /* CONFIG_ACPI_NUMA */
-
 #endif /*__KERNEL__*/
 
 #endif /*_ASM_ACPI_H*/
arch/ia64/kernel/acpi.c +0 -17
index 70d1587ddcd4..f681e8068c8d 100644
@@ -316,8 +316,6 @@ static int __init acpi_parse_madt(struct acpi_table_header *table)
 	return 0;
 }
 
-#ifdef CONFIG_ACPI_NUMA
-
 #undef SLIT_DEBUG
 
 #define PXM_FLAG_LEN ((MAX_PXM_DOMAINS + 1)/32)
@@ -517,7 +515,6 @@ void __init acpi_numa_fixup(void)
 	}
 #endif
 }
-#endif				/* CONFIG_ACPI_NUMA */
 
 /*
  * success: return IRQ number (>=0)
@@ -668,7 +665,6 @@ int __init acpi_boot_init(void)
 	if (acpi_table_parse(ACPI_SIG_FADT, acpi_parse_fadt))
 		printk(KERN_ERR PREFIX "Can't find FADT\n");
 
-#ifdef CONFIG_ACPI_NUMA
 #ifdef CONFIG_SMP
 	if (srat_num_cpus = 0) {
 		int cpu, i = 1;
@@ -680,7 +676,6 @@ int __init acpi_boot_init(void)
 	}
 #endif
 	build_cpu_to_node_map();
-#endif
 	return 0;
 }
 
@@ -713,7 +708,6 @@ int acpi_isa_irq_to_gsi(unsigned isa_irq, u32 *gsi)
 #ifdef CONFIG_ACPI_HOTPLUG_CPU
 int acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
 {
-#ifdef CONFIG_ACPI_NUMA
 	/*
 	 * We don't have cpu-only-node hotadd. But if the system equips
 	 * SRAT table, pxm is already found and node is ready.
@@ -723,7 +717,6 @@ int acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
 	 */
 	node_cpuid[cpu].phys_id = physid;
 	node_cpuid[cpu].nid = acpi_get_node(handle);
-#endif
 	return 0;
 }
 
@@ -813,17 +806,11 @@ int acpi_unmap_cpu(int cpu)
 {
 	ia64_cpu_to_sapicid[cpu] = -1;
 	set_cpu_present(cpu, false);
-
-#ifdef CONFIG_ACPI_NUMA
-	/* NUMA specific cleanup's */
-#endif
-
 	return (0);
 }
 EXPORT_SYMBOL(acpi_unmap_cpu);
 #endif				/* CONFIG_ACPI_HOTPLUG_CPU */
 
-#ifdef CONFIG_ACPI_NUMA
 static acpi_status acpi_map_iosapic(acpi_handle handle, u32 depth,
 				    void *context, void **ret)
 {
@@ -877,7 +864,6 @@ acpi_map_iosapics (void)
 }
 
 fs_initcall(acpi_map_iosapics);
-#endif				/* CONFIG_ACPI_NUMA */
 
 int __ref acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base)
 {
@@ -886,10 +872,7 @@ int __ref acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base)
 	if ((err = iosapic_init(phys_addr, gsi_base)))
 		return err;
 
-#ifdef CONFIG_ACPI_NUMA
 	acpi_map_iosapic(handle, 0, NULL, NULL);
-#endif				/* CONFIG_ACPI_NUMA */
-
 	return 0;
 }
 
arch/ia64/kernel/setup.c +0 -2
index 18de565d5825..6dbb58bb4c8c 100644
@@ -569,7 +569,6 @@ setup_arch (char **cmdline_p)
 	/* Initialize the ACPI boot-time table parser */
 	acpi_table_init();
 	early_acpi_boot_init();
-#ifdef CONFIG_ACPI_NUMA
 	acpi_numa_init();
 	acpi_numa_fixup();
 #ifdef CONFIG_ACPI_HOTPLUG_CPU
@@ -578,7 +577,6 @@ setup_arch (char **cmdline_p)
 	per_cpu_scan_finalize((cpumask_weight(&early_cpu_possible_map) = 0 ?
 		32 : cpumask_weight(&early_cpu_possible_map)),
 		additional_cpus > 0 ? additional_cpus : 0);
-#endif /* CONFIG_ACPI_NUMA */
 
 #ifdef CONFIG_SMP
 	smp_build_cpu_map();
Signature · 1 line
2.20.1
#28 lore raw

PATCH 29/29 genirq: remove the is_affinity_mask_valid hook

In reply to Christoph Hellwig

This override was only used by the ia64 SGI SN2 platform, which is gone now.

---
 kernel/irq/proc.c | 14 --------------
 1 file changed, 14 deletions(-)
kernel/irq/proc.c +0 -14
index da9addb8d655..cfc4f088a0e7 100644
@@ -100,10 +100,6 @@ static int irq_affinity_hint_proc_show(struct seq_file *m, void *v)
 	return 0;
 }
 
-#ifndef is_affinity_mask_valid
-#define is_affinity_mask_valid(val) 1
-#endif
-
 int no_irq_affinity;
 static int irq_affinity_proc_show(struct seq_file *m, void *v)
 {
@@ -136,11 +132,6 @@ static ssize_t write_irq_affinity(int type, struct file *file,
 	if (err)
 		goto free_cpumask;
 
-	if (!is_affinity_mask_valid(new_value)) {
-		err = -EINVAL;
-		goto free_cpumask;
-	}
-
 	/*
 	 * Do not allow disabling IRQs completely - it's a too easy
 	 * way to make the system unusable accidentally :-) At least
@@ -232,11 +223,6 @@ static ssize_t default_affinity_write(struct file *file,
 	if (err)
 		goto out;
 
-	if (!is_affinity_mask_valid(new_value)) {
-		err = -EINVAL;
-		goto out;
-	}
-
 	/*
 	 * Do not allow disabling IRQs completely - it's a too easy
 	 * way to make the system unusable accidentally :-) At least
Signature · 1 line
2.20.1
#29 lore raw
In reply to Christoph Hellwig

Hi Christoph!

Quoted 4 lines · Christoph Hellwig

let me know what you think of this series. This drops the pretty much dead sn2 and hpsim support, which then allows us to build a single ia64 kernel image that supports all remaining systems without extra indirections in the fast path.

Interesting. Does that mean Debian no longer needs to maintain two different kernels for ia64, currently named "itanium" and "mckinley"?

Adrian

Signature · 4 lines
 .''`.  John Paul Adrian Glaubitz
: :' :  Debian Developer - [email protected]
`. `'   Freie Universitaet Berlin - [email protected]
  `-    GPG: 62FF 8A75 84E0 2956 9546  0006 7426 3B37 F5B5 F913
#30 lore raw
Quoted 10 lines · John Paul Adrian Glaubitz

Hi Christoph!

Quoted 4 lines · Christoph Hellwig

let me know what you think of this series. This drops the pretty much dead sn2 and hpsim support, which then allows us to build a single ia64 kernel image that supports all remaining systems without extra indirections in the fast path.

Interesting. Does that mean Debian no longer needs to maintain two different kernels for ia64, currently named "itanium" and "mckinley"?

I don't think so. Assumeing one of them sets CONFIG_ITANIUM and the other just CONFIG_MCKINLEY, the first one already covers everything that the second can. But assuming both set CONFIG_IA64_GENERIC they should both get a little faster as a lot of indirect calls there just exist for SN2 are gone with this. And if my memory serves me right indirect calls have always been rather expensive on ia64 vs other architectures (at least before spectre mitigations made others slower as well).

Quoted 8 lines

Adrian

Signature · 4 lines
 .''`.  John Paul Adrian Glaubitz
: :' :  Debian Developer - [email protected]
`. `'   Freie Universitaet Berlin - [email protected]
  `-    GPG: 62FF 8A75 84E0 2956 9546  0006 7426 3B37 F5B5 F913

---end quoted text---

#31 lore raw

RE: remove sn2, hpsim and ia64 machvecs

In reply to Christoph Hellwig

I like the idea ... and it sure gets rid of a lot of code.

Quoted 3 lines

A git tree is also available at:

git://git.infradead.org/users/hch/misc.git ia64-remove-machvecs

I grabbed this tree and ran though my build scripts. I found that vmlinux.gz doesn't get built. Which is odd, because I don't see that you changed the "compressed" target in the Makefile.

Even if I explicitly run:

$ make compressed

It still doesn't build it. Weird.

-Tony

#32 lore raw

RE: remove sn2, hpsim and ia64 machvecs

Quoted 5 lines

Even if I explicitly run:

$ make compressed

It still doesn't build it. Weird.

Ugh! The rule to do the compression was in arch/ia64/hp/sim/boot/Makefile which went away as part of the deletion of hpsim.

-Tony

#33 lore raw

Re: remove sn2, hpsim and ia64 machvecs

Quoted 2 lines · Tony

Ugh! The rule to do the compression was in arch/ia64/hp/sim/boot/Makefile which went away as part of the deletion of hpsim.

This fixes it ... should fold into the patch that dropped the arch/ia64/hp/sim/boot/Makefile

I just cut/pasted in those cmd_gzip and cmd_objcopy definitions from elsewhere in the tree. It might be possible to simplify them.

---
 arch/ia64/Makefile | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)
arch/ia64/Makefile +11 -1
index 6eaa0ffd15ca..e0bb2b6aaa35 100644
@@ -39,6 +39,12 @@ $(error Sorry, you need a newer version of the assember, one that is built from
 		ftp://ftp.hpl.hp.com/pub/linux-ia64/gas-030124.tar.gz)
 endif
 
+quiet_cmd_gzip = GZIP    $@
+cmd_gzip = cat $(real-prereqs) | gzip -n -f -9 > $@
+
+quiet_cmd_objcopy = OBJCOPY $@
+cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
+
 KBUILD_CFLAGS += $(cflags-y)
 head-y := arch/ia64/kernel/head.o
 
@@ -57,7 +63,11 @@ compressed: vmlinux.gz
 
 vmlinuz: vmlinux.gz
 
-vmlinux.gz: vmlinux
+vmlinux.gz: vmlinux.bin FORCE
+	$(call if_changed,gzip)
+
+vmlinux.bin: vmlinux FORCE
+	$(call if_changed,objcopy)
 
 unwcheck: vmlinux
 	-$(Q)READELF=$(READELF) $(PYTHON) $(srctree)/arch/ia64/scripts/unwcheck.py $<
Signature · 1 line
2.20.1
#34 lore raw

Re: remove sn2, hpsim and ia64 machvecs

Quoted 9 lines · Tony
Quoted 2 lines · Tony

Ugh! The rule to do the compression was in arch/ia64/hp/sim/boot/Makefile which went away as part of the deletion of hpsim.

This fixes it ... should fold into the patch that dropped the arch/ia64/hp/sim/boot/Makefile

I just cut/pasted in those cmd_gzip and cmd_objcopy definitions from elsewhere in the tree. It might be possible to simplify them.

Lets keep it simple. I've picked this up for the hpsim removal patch.

#35 lore raw

Re: remove sn2, hpsim and ia64 machvecs

Quoted 5 lines · Christoph Hellwig
Quoted 4 lines · Tony
Quoted 2 lines · Tony

Ugh! The rule to do the compression was in arch/ia64/hp/sim/boot/Makefile which went away as part of the deletion of hpsim.

Quoted 7 lines
Quoted 5 lines

This fixes it ... should fold into the patch that dropped the arch/ia64/hp/sim/boot/Makefile

I just cut/pasted in those cmd_gzip and cmd_objcopy definitions from elsewhere in the tree. It might be possible to simplify them.

Lets keep it simple. I've picked this up for the hpsim removal patch.

So most configs now build, and the generic one boots on my Tukwila system.

But a config based on arch/ia64/configs/zx1_defconfig gets a bunch of build errors from different files complaining about 'max_mapnr'

arch/ia64/mm/init.c:198:8: error: 'max_mapnr' undeclared (first use in this function) ./include/linux/dma-mapping.h:359:6: error: 'max_mapnr' undeclared (first use in this function) kernel/dma/mapping.c:126:8: error: 'max_mapnr' undeclared (first use in this function) kernel/dma/mapping.c:181:8: error: 'max_mapnr' undeclared (first use in this function) mm/internal.h:393:8: error: 'max_mapnr' undeclared (first use in this function)

-Tony

#36 lore raw

Re: remove sn2, hpsim and ia64 machvecs

Quoted 10 lines · Tony

So most configs now build, and the generic one boots on my Tukwila system.

But a config based on arch/ia64/configs/zx1_defconfig gets a bunch of build errors from different files complaining about 'max_mapnr'

arch/ia64/mm/init.c:198:8: error: 'max_mapnr' undeclared (first use in this function) ./include/linux/dma-mapping.h:359:6: error: 'max_mapnr' undeclared (first use in this function) kernel/dma/mapping.c:126:8: error: 'max_mapnr' undeclared (first use in this function) kernel/dma/mapping.c:181:8: error: 'max_mapnr' undeclared (first use in this function) mm/internal.h:393:8: error: 'max_mapnr' undeclared (first use in this function)

Looks like we somehow lost the indirect mm.h include for those builds, I'll take a look at fixing this up.