Skip to contentSkip to conversation

Silent console fixes

PATCH New Patrice Chotard 2 participants 5 messages Aug 2, 2019 – Aug 8, 2019

lore
Share & tools
lore
#0 lore raw

cover Silent console fixes

This series fixes:
- issue when silent property is updated in saved environment
- issue regarding console flush when silent property is removed from saved environment

Patrick Delaunay (2):
console: update silent tag after env load
console: execute flush on uart when silent is removed

 common/console.c | 47 +++++++++++++++++++++++++++++++++++++++--------
 1 file changed, 39 insertions(+), 8 deletions(-)
Signature · 1 line
2.17.1
#1 lore raw

PATCH 1/2 console: update silent tag after env load

From: Patrick Delaunay <[email protected]>

Update the "silent" property with the variable "silent" get from saved environment, it solves the issue when:
- CONFIG_SILENT_CONSOLE and CONFIG_SYS_CONSOLE_IS_IN_ENV are activated
- silent is not defined in default environment
- silent is requested in saved environment with:

Quoted 1 line

env set silent 1; env save

On next reboot the console is not disabled as expected after relocation and the environment load from flash (the callback is not called when the INSERT is requested in the created hash table)

---

 common/console.c | 4 ++++
 1 file changed, 4 insertions(+)
common/console.c +4 -0
index 0b0dd76256..7b45403bb3 100644
@@ -793,6 +793,9 @@ int console_init_r(void)
 	int iomux_err = 0;
 #endif
 
+	/* update silent for env loaded from flash (initr_env) */
+	console_update_silent();
+
 	/* set default handlers at first */
 	gd->jt->getc  = serial_getc;
 	gd->jt->tstc  = serial_tstc;
@@ -884,6 +887,7 @@ int console_init_r(void)
 	struct list_head *pos;
 	struct stdio_dev *dev;
 
+	/* update silent for env loaded from flash (initr_env) */
 	console_update_silent();
 
 #ifdef CONFIG_SPLASH_SCREEN
Signature · 1 line
2.17.1
#2 lore raw

PATCH 1/2 console: update silent tag after env load

Quoted 7 lines · Patrice Chotard

From: Patrick Delaunay <[email protected]>

Update the "silent" property with the variable "silent" get from saved environment, it solves the issue when:
- CONFIG_SILENT_CONSOLE and CONFIG_SYS_CONSOLE_IS_IN_ENV are activated
- silent is not defined in default environment
- silent is requested in saved environment with:

Quoted 8 lines
Quoted 1 line

env set silent 1; env save

On next reboot the console is not disabled as expected after relocation and the environment load from flash (the callback is not called when the INSERT is requested in the created hash table)

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190807/14a538b2/attachment.sig>
#3 lore raw

PATCH 2/2 console: execute flush on uart when silent is removed

In reply to Patrice Chotard

From: Patrick Delaunay <[email protected]>

Avoid to flush buffer when silent console is activated as the console can be reactivate later, after relocation, when the env will be updated with the saved one.

Solve issue (missing beginning of U-Boot trace) when:
- CONFIG_SILENT_CONSOLE is activated
- silent=1 is defined in default environment (CONFIG_EXTRA_ENV_SETTINGS)
- silent is removed in saved environment with:
> env delete silent; env save

Only functional when PRE_CONSOLE_BUFFER is activated.

---

 common/console.c | 45 ++++++++++++++++++++++++++++++++++++---------
 1 file changed, 36 insertions(+), 9 deletions(-)
common/console.c +36 -9
index 7b45403bb3..d086feabb1 100644
@@ -463,6 +463,11 @@ static void print_pre_console_buffer(int flushpoint)
 	char buf_out[CONFIG_PRE_CON_BUF_SZ + 1];
 	char *buf_in;
 
+#ifdef CONFIG_SILENT_CONSOLE
+	if (gd->flags & GD_FLG_SILENT)
+		return;
+#endif
+
 	buf_in = map_sysmem(CONFIG_PRE_CON_BUF_ADDR, CONFIG_PRE_CON_BUF_SZ);
 	if (gd->precon_buf_idx > CONFIG_PRE_CON_BUF_SZ)
 		in = gd->precon_buf_idx - CONFIG_PRE_CON_BUF_SZ;
@@ -511,8 +516,11 @@ void putc(const char c)
 		membuff_putbyte(&gd->console_out, c);
 #endif
 #ifdef CONFIG_SILENT_CONSOLE
-	if (gd->flags & GD_FLG_SILENT)
+	if (gd->flags & GD_FLG_SILENT) {
+		if (!(gd->flags & GD_FLG_DEVINIT))
+			pre_console_putc(c);
 		return;
+	}
 #endif
 
 #ifdef CONFIG_DISABLE_CONSOLE
@@ -559,8 +567,11 @@ void puts(const char *s)
 		membuff_put(&gd->console_out, s, strlen(s));
 #endif
 #ifdef CONFIG_SILENT_CONSOLE
-	if (gd->flags & GD_FLG_SILENT)
+	if (gd->flags & GD_FLG_SILENT) {
+		if (!(gd->flags & GD_FLG_DEVINIT))
+			pre_console_puts(s);
 		return;
+	}
 #endif
 
 #ifdef CONFIG_DISABLE_CONSOLE
@@ -720,14 +731,22 @@ int console_assign(int file, const char *devname)
 	return -1;
 }
 
-static void console_update_silent(void)
+/* return true if the 'silent' flag is removed */
+static bool console_update_silent(void)
 {
 #ifdef CONFIG_SILENT_CONSOLE
-	if (env_get("silent") != NULL)
+	if (env_get("silent")) {
 		gd->flags |= GD_FLG_SILENT;
-	else
+	} else {
+		unsigned long flags = gd->flags;
+
 		gd->flags &= ~GD_FLG_SILENT;
+
+		return !!(flags & GD_FLG_SILENT);
+	}
 #endif
+
+	return false;
 }
 
 int console_announce_r(void)
@@ -792,9 +811,13 @@ int console_init_r(void)
 #if CONFIG_IS_ENABLED(CONSOLE_MUX)
 	int iomux_err = 0;
 #endif
+	int flushpoint;
 
 	/* update silent for env loaded from flash (initr_env) */
-	console_update_silent();
+	if (console_update_silent())
+		flushpoint = PRE_CONSOLE_FLUSHPOINT1_SERIAL;
+	else
+		flushpoint = PRE_CONSOLE_FLUSHPOINT2_EVERYTHING_BUT_SERIAL;
 
 	/* set default handlers at first */
 	gd->jt->getc  = serial_getc;
@@ -872,7 +895,7 @@ done:
 	if ((stdio_devices[stdin] == NULL) && (stdio_devices[stdout] == NULL))
 		return 0;
 #endif
-	print_pre_console_buffer(PRE_CONSOLE_FLUSHPOINT2_EVERYTHING_BUT_SERIAL);
+	print_pre_console_buffer(flushpoint);
 	return 0;
 }
 
@@ -886,9 +909,13 @@ int console_init_r(void)
 	struct list_head *list = stdio_get_list();
 	struct list_head *pos;
 	struct stdio_dev *dev;
+	int flushpoint;
 
 	/* update silent for env loaded from flash (initr_env) */
-	console_update_silent();
+	if (console_update_silent())
+		flushpoint = PRE_CONSOLE_FLUSHPOINT1_SERIAL;
+	else
+		flushpoint = PRE_CONSOLE_FLUSHPOINT2_EVERYTHING_BUT_SERIAL;
 
 #ifdef CONFIG_SPLASH_SCREEN
 	/*
@@ -951,7 +978,7 @@ int console_init_r(void)
 	if ((stdio_devices[stdin] == NULL) && (stdio_devices[stdout] == NULL))
 		return 0;
 #endif
-	print_pre_console_buffer(PRE_CONSOLE_FLUSHPOINT2_EVERYTHING_BUT_SERIAL);
+	print_pre_console_buffer(flushpoint);
 	return 0;
 }
 
Signature · 1 line
2.17.1
#4 lore raw

PATCH 2/2 console: execute flush on uart when silent is removed

Quoted 12 lines · Patrice Chotard

From: Patrick Delaunay <[email protected]>

Avoid to flush buffer when silent console is activated as the console can be reactivate later, after relocation, when the env will be updated with the saved one.

Solve issue (missing beginning of U-Boot trace) when:
- CONFIG_SILENT_CONSOLE is activated
- silent=1 is defined in default environment (CONFIG_EXTRA_ENV_SETTINGS)
- silent is removed in saved environment with:
> env delete silent; env save

Quoted 4 lines

Only functional when PRE_CONSOLE_BUFFER is activated.

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190807/0c084b7c/attachment.sig>