Skip to contentSkip to conversation

dt-bindings: vendor-prefixes: Add Anvo-Systems

PATCH Superseded Krzysztof Kozlowski 2 participants 5 messages Aug 8, 2019 – Aug 12, 2019

Subsystems (3)

v4 of 7 Superseded Latest is v7 →

lore
Share & tools
lore

Krzysztof Kozlowski

author maintainer
#0 lore raw

PATCH v4 1/3 dt-bindings: vendor-prefixes: Add Anvo-Systems

Add vendor prefix for Anvo-Systems Dresden GmbH.

---

Changes since v3:
1. Add Rob's tag,
2. Remove Admatec (not needed anymore).

Changes since v2:
1. Use admatecde vendor prefix.
2. Add Anvo-Systems Dresden GmbH.

Changes since v1:
New patch

---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/vendor-prefixes.yaml +2 -0
index 6992bbbbffab..519889f5aec8 100644
@@ -81,6 +81,8 @@ patternProperties:
     description: Analogix Semiconductor, Inc.
   "^andestech,.*":
     description: Andes Technology Corporation
+  "^anvo,.*":
+    description: Anvo-Systems Dresden GmbH
   "^apm,.*":
     description: Applied Micro Circuits Corporation (APM)
   "^aptina,.*":
Signature · 1 line
2.17.1
author maintainer
#1 lore raw

PATCH v4 2/3 dt-bindings: eeprom: at25: Add Anvo ANV32E61W

Document the compatible for ANV32E61W EEPROM chip.

---

New patch

---
 Documentation/devicetree/bindings/eeprom/at25.txt | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/eeprom/at25.txt +1 -0
index b3bde97dc199..42577dd113dd 100644
@@ -3,6 +3,7 @@ EEPROMs (SPI) compatible with Atmel at25.
 Required properties:
 - compatible : Should be "<vendor>,<type>", and generic value "atmel,at25".
   Example "<vendor>,<type>" values:
+    "anvo,anv32e61w"
     "microchip,25lc040"
     "st,m95m02"
     "st,m95256"
Signature · 1 line
2.17.1
#2 lore raw

Re: [PATCH v4 2/3] dt-bindings: eeprom: at25: Add Anvo ANV32E61W

Quoted 1 line · Krzysztof Kozlowski

Document the compatible for ANV32E61W EEPROM chip.

This chip is actually not an EEPROM, but a SPI nvSRAM. It can be interfaced by the at25 driver similar to an EEPROM. This is not the ideal solution, but it works until there's a proper driver for such chips. Maybe you can add some of these details to the commit message here. Also there is more information on this topic here:
https://patchwork.ozlabs.org/patch/1043950/.

Quoted 24 lines

---

New patch

---
  Documentation/devicetree/bindings/eeprom/at25.txt | 1 +
  1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/eeprom/at25.txt +1 -0
index b3bde97dc199..42577dd113dd 100644
@@ -3,6 +3,7 @@ EEPROMs (SPI) compatible with Atmel at25.
  Required properties:
  - compatible : Should be "<vendor>,<type>", and generic value "atmel,at25".
    Example "<vendor>,<type>" values:
+    "anvo,anv32e61w"
      "microchip,25lc040"
      "st,m95m02"
      "st,m95256"
author maintainer
#3 lore raw

Re: [PATCH v4 2/3] dt-bindings: eeprom: at25: Add Anvo ANV32E61W

Quoted 10 lines · Schrempf Frieder
Quoted 1 line · Krzysztof Kozlowski

Document the compatible for ANV32E61W EEPROM chip.

This chip is actually not an EEPROM, but a SPI nvSRAM. It can be interfaced by the at25 driver similar to an EEPROM. This is not the ideal solution, but it works until there's a proper driver for such chips. Maybe you can add some of these details to the commit message here. Also there is more information on this topic here:
https://patchwork.ozlabs.org/patch/1043950/.

Indeed, I'll correct the description of commit.

Best regards,
Krzysztof

author maintainer
#4 lore raw

PATCH v4 3/3 ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards

In reply to Krzysztof Kozlowski

Add support for i.MX6UL modules from Kontron Electronics GmbH (before
acquisition: Exceet Electronics) and evalkit boards based on it:

1. N6310 SOM: i.MX6 UL System-on-Module, a 25x25 mm solderable module (LGA pads and pin castellations) with 256 MB RAM, 1 MB NOR-Flash, 256 MB NAND and other interfaces,
2. N6310 S: evalkit, w/wo eMMC, without display,
3. N6310 S 43: evalkit with 4.3" display,

The work is based on Exceet/Kontron source code (GPLv2) with numerous changes:
1. Reorganize files,
2. Rename Exceet -> Kontron,
3. Rename models/compatibles to match newest Kontron product naming,
4. Fix coding style errors and adjust to device tree coding guidelines,
5. Fix DTC warnings,
6. Extend compatibles so eval boards inherit the SoM compatible,
7. Use defines instead of GPIO and interrupt flag values,
8. Use proper vendor compatible for Macronix SPI NOR,
9. Replace deprecated bindings with proper ones,
10. Sort nodes alphabetically,
11. Remove Admatec display nodes (not yet supported).

---

Changes since v3, after Shawn's review:
1. Split bindings update to patch 2/3,
2. Remove unsupported displays from (Admatec),
3. Remove N6310 S 50 board (same as N6310 S 43 since there is no Admatec display),
4. Order iomux nodes by name, minor cleanup,
5. Use wakeup-source instead of enable-sdio-wakeup,
6. Add review tags.

Changes since v2, after Fabio's review:
1. Add "imx6ul" compatible to board name (that's what I understood from review),
2. Add vendor/device prefix to eeprom and document the compatible,
3. Use "admatecde" as vendor compatible to avoid confusion with Admatec AG in Switzerland (also making LCD panels),
4. Use generic names for nodes,
5. Use IRQ_TYPE_LEVEL_LOW,
6. Move iomux to the end of files,
7. Remove regulators node (include regulators in top level),
8. Remove cpu clock-frequency,
9. Other minor fixes pointed by Fabio.

Changes since v1, after Frieder's review:
1. Remove unneeded license notes,
2. Add Kontron copyright (2018),
3. Rename the files/models/compatibles to new naming - N6310,
4. Remove unneeded CPU operating points override,
5. Switch regulator nodes into simple children nodes without addresses (so not simple bus),
6. Use proper vendor compatible for Macronix SPI NOR.

---
 .../devicetree/bindings/arm/fsl.yaml          |   3 +
 arch/arm/boot/dts/Makefile                    |   2 +
 .../boot/dts/imx6ul-kontron-n6310-s-43.dts    | 102 +++++
 arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts  | 420 ++++++++++++++++++
 .../boot/dts/imx6ul-kontron-n6310-som.dtsi    | 134 ++++++
 5 files changed, 661 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts
 create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts
 create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi
Documentation/devicetree/bindings/arm/fsl.yaml +3 -0
index 7294ac36f4c0..d07b3c06d7cf 100644
@@ -161,6 +161,9 @@ properties:
         items:
           - enum:
               - fsl,imx6ul-14x14-evk      # i.MX6 UltraLite 14x14 EVK Board
+              - kontron,imx6ul-n6310-som  # Kontron N6310 SOM
+              - kontron,imx6ul-n6310-s    # Kontron N6310 S Board
+              - kontron,imx6ul-n6310-s-43 # Kontron N6310 S 43 Board
           - const: fsl,imx6ul
 
       - description: i.MX6ULL based Boards
arch/arm/boot/dts/Makefile +2 -0
index 9159fa2cea90..747eef501f95 100644
@@ -569,6 +569,8 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
 	imx6ul-geam.dtb \
 	imx6ul-isiot-emmc.dtb \
 	imx6ul-isiot-nand.dtb \
+	imx6ul-kontron-n6310-s.dtb \
+	imx6ul-kontron-n6310-s-43.dtb \
 	imx6ul-liteboard.dtb \
 	imx6ul-opos6uldev.dtb \
 	imx6ul-pico-hobbit.dtb \
arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts new file +102 -0

102 lines not on this page · raw message

arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts new file +420 -0

420 lines not on this page · raw message

arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi new file +134 -0

134 lines not on this page · raw message

Signature · 1 line
2.17.1