Skip to contentSkip to conversation

perf/urgent improvements and fixes

GIT PULL New Arnaldo Carvalho de Melo 1 participant 11 messages Aug 8, 2019

Subsystems (2)
lore
Share & tools
lore

Arnaldo Carvalho de Melo

author maintainer
#0 lore raw

Hi Ingo,

Please consider pulling,

Best regards,

- Arnaldo

Test results at the end of this message, as usual.

The following changes since commit b3c303be4c35856945cb17ec639b94637447dae2:

Merge tag 'perf-urgent-for-mingo-5.3-20190729' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent (2019-07-29 23:24:07 +0200)

are available in the Git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git tags/perf-urgent-for-mingo-5.3-20190808

for you to fetch changes up to 8e6e5bea2e34c61291d00cb3f47560341aa84bc3:

perf pmu-events: Fix missing "cpu_clk_unhalted.core" event (2019-08-08 15:41:37 -0300)

----------------------------------------------------------------
perf/urgent fixes:

db-export:

Adrian Hunter:

- Fix thread__exec_comm() picking of main thread COMM for pre-existing, synthesized from /proc data records.

annotate:

Arnaldo Carvalho de Melo:

- Fix printing of unaugmented disassembled instructions from BPF, some lines were leaving leftovers from the previous screen, due to use of newlines by binutils's libopcode disassembler.

perf ftrace:

He Zhe:

- Fix cpumask problems when only one CPU is present.

PMU events:

Jin Yao:

- Add missing "cpu_clk_unhalted.core" event.

perf bench:

Jiri Olsa:

- Fix cpu0 binding in the NUMA benchmarks.

s390:

Thomas Richter:

- Fix module size calculations.

build system:

Masanari Iida:

- Fix a typo in a variable name in the Documentation Makefile

misc:

Ian Rogers:

- Fix include paths in ui directory.

----------------------------------------------------------------
Adrian Hunter (1):
perf db-export: Fix thread__exec_comm()

Arnaldo Carvalho de Melo (1):
perf annotate: Fix printing of unaugmented disassembled instructions from BPF

He Zhe (2):
perf ftrace: Fix failure to set cpumask when only one cpu is present perf cpumap: Fix writing to illegal memory in handling cpumap mask

Ian Rogers (1):
perf tools: Fix include paths in ui directory

Jin Yao (1):
perf pmu-events: Fix missing "cpu_clk_unhalted.core" event

Jiri Olsa (1):
perf bench numa: Fix cpu0 binding

Masanari Iida (1):
perf tools: Fix a typo in a variable name in the Documentation Makefile

Thomas Richter (2):
perf record: Fix module size on s390
perf annotate: Fix s390 gap between kernel end and module start

 tools/perf/Documentation/Makefile   |  2 +-
 tools/perf/arch/s390/util/machine.c | 31 ++++++++++++++++++++++++++++++-
 tools/perf/bench/numa.c             |  6 ++++--
 tools/perf/builtin-ftrace.c         |  2 +-
 tools/perf/pmu-events/jevents.c     |  1 +
 tools/perf/ui/browser.c             |  9 +++++----
 tools/perf/ui/tui/progress.c        |  2 +-
 tools/perf/util/annotate.c          |  2 +-
 tools/perf/util/cpumap.c            |  5 ++++-
 tools/perf/util/machine.c           |  3 ++-
 tools/perf/util/machine.h           |  2 +-
 tools/perf/util/symbol.c            |  7 ++++++-
 tools/perf/util/symbol.h            |  1 +
 tools/perf/util/thread.c            | 12 +++++++++++-
 14 files changed, 69 insertions(+), 16 deletions(-)

Test results:

The first ones are container based builds of tools/perf with and without libelf support. Where clang is available, it is also used to build perf with/without libelf, and building with LIBCLANGLLVM=1 (built-in clang) with gcc and clang when clang and its devel libraries are installed.

The objtool and samples/bpf/ builds are disabled now that I'm switching from using the sources in a local volume to fetching them from a http server to build it inside the container, to make it easier to build in a container cluster. Those will come back later.

Several are cross builds, the ones with -x-ARCH and the android one, and those may not have all the features built, due to lack of multi-arch devel packages, available and being used so far on just a few, like debian:experimental-x-{arm64,mipsel}.

The 'perf test' one will perform a variety of tests exercising tools/perf/util/, tools/lib/{bpf,traceevent,etc}, as well as run perf commands with a variety of command line event specifications to then intercept the sys_perf_event syscall to check that the perf_event_attr fields are set up as expected, among a variety of other unit tests.

Then there is the 'make -C tools/perf build-test' ones, that build tools/perf/ with a variety of feature sets, exercising the build with an incomplete set of features as well as with a complete one. It is planned to have it run on each of the containers mentioned above, using some container orchestration infrastructure. Get in contact if interested in helping having this in place.

Clearlinux is failing when building with libpython, but that is not a perf regression, will try to remove one compiler warning that is causing the problem when building some of the glue code files in the python files, outside perf.

  # export PERF_TARBALL=http://192.168.124.1/perf/perf-5.3.0-rc2.tar.xz
  # dm
   1 alpine:3.4                    : Ok   gcc (Alpine 5.3.0) 5.3.0, clang version 3.8.0 (tags/RELEASE_380/final)
   2 alpine:3.5                    : Ok   gcc (Alpine 6.2.1) 6.2.1 20160822, clang version 3.8.1 (tags/RELEASE_381/final)
   3 alpine:3.6                    : Ok   gcc (Alpine 6.3.0) 6.3.0, clang version 4.0.0 (tags/RELEASE_400/final)
   4 alpine:3.7                    : Ok   gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.0 (tags/RELEASE_500/final) (based on LLVM 5.0.0)
   5 alpine:3.8                    : Ok   gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.1 (tags/RELEASE_501/final) (based on LLVM 5.0.1)
   6 alpine:3.9                    : Ok   gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 5.0.1 (tags/RELEASE_502/final) (based on LLVM 5.0.1)
   7 alpine:3.10                   : Ok   gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 8.0.0 (tags/RELEASE_800/final) (based on LLVM 8.0.0)
   8 alpine:edge                   : Ok   gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 8.0.0 (tags/RELEASE_800/final) (based on LLVM 8.0.0)
   9 amazonlinux:1                 : Ok   gcc (GCC) 7.2.1 20170915 (Red Hat 7.2.1-2), clang version 3.6.2 (tags/RELEASE_362/final)
  10 amazonlinux:2                 : Ok   gcc (GCC) 7.3.1 20180303 (Red Hat 7.3.1-5), clang version 7.0.1 (Amazon Linux 2 7.0.1-1.amzn2.0.2)
  11 android-ndk:r12b-arm          : Ok   arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
  12 android-ndk:r15c-arm          : Ok   arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
  13 centos:5                      : Ok   gcc (GCC) 4.1.2 20080704 (Red Hat 4.1.2-55)
  14 centos:6                      : Ok   gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23)
  15 centos:7                      : Ok   gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-36), clang version 3.4.2 (tags/RELEASE_34/dot2-final)
  16 clearlinux:latest             : Ok   gcc (Clear Linux OS for Intel Architecture) 9.1.1 20190724 gcc-9-branch@273755, clang version 8.0.0 (tags/RELEASE_800/final)
  17 debian:8                      : Ok   gcc (Debian 4.9.2-10+deb8u2) 4.9.2, Debian clang version 3.5.0-10 (tags/RELEASE_350/final) (based on LLVM 3.5.0)
  18 debian:9                      : Ok   gcc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516, clang version 3.8.1-24 (tags/RELEASE_381/final)
  19 debian:10                     : Ok   gcc (Debian 8.3.0-6) 8.3.0, clang version 7.0.1-8 (tags/RELEASE_701/final)
  20 debian:experimental           : Ok   gcc (Debian 8.3.0-19) 8.3.0, clang version 7.0.1-8 (tags/RELEASE_701/final)
  21 debian:experimental-x-arm64   : Ok   aarch64-linux-gnu-gcc (Debian 8.3.0-19) 8.3.0
  22 debian:experimental-x-mips    : Ok   mips-linux-gnu-gcc (Debian 8.3.0-19) 8.3.0
  23 debian:experimental-x-mips64  : Ok   mips64-linux-gnuabi64-gcc (Debian 8.3.0-7) 8.3.0
  24 debian:experimental-x-mipsel  : Ok   mipsel-linux-gnu-gcc (Debian 8.3.0-19) 8.3.0
  25 fedora:20                     : Ok   gcc (GCC) 4.8.3 20140911 (Red Hat 4.8.3-7), clang version 3.4.2 (tags/RELEASE_34/dot2-final)
  26 fedora:22                     : Ok   gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.5.0 (tags/RELEASE_350/final)
  27 fedora:23                     : Ok   gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.7.0 (tags/RELEASE_370/final)
  28 fedora:24                     : Ok   gcc (GCC) 6.3.1 20161221 (Red Hat 6.3.1-1), clang version 3.8.1 (tags/RELEASE_381/final)
  29 fedora:24-x-ARC-uClibc        : Ok   arc-linux-gcc (ARCompact ISA Linux uClibc toolchain 2017.09-rc2) 7.1.1 20170710
  30 fedora:25                     : Ok   gcc (GCC) 6.4.1 20170727 (Red Hat 6.4.1-1), clang version 3.9.1 (tags/RELEASE_391/final)
  31 fedora:26                     : Ok   gcc (GCC) 7.3.1 20180130 (Red Hat 7.3.1-2), clang version 4.0.1 (tags/RELEASE_401/final)
  32 fedora:27                     : Ok   gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-6), clang version 5.0.2 (tags/RELEASE_502/final)
  33 fedora:28                     : Ok   gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 6.0.1 (tags/RELEASE_601/final)
  34 fedora:29                     : Ok   gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 7.0.1 (Fedora 7.0.1-6.fc29)
  35 fedora:30                     : Ok   gcc (GCC) 9.1.1 20190503 (Red Hat 9.1.1-1), clang version 8.0.0 (Fedora 8.0.0-1.fc30)
  36 fedora:31                     : OK   gcc (GCC) 9.1.1 20190605 (Red Hat 9.1.1-2), clang version 8.0.0 (Fedora 8.0.0-3.fc31.1)
  37 fedora:rawhide                : Ok   gcc (GCC) 9.1.1 20190605 (Red Hat 9.1.1-2), clang version 8.0.0 (Fedora 8.0.0-3.fc31.1)
  38 gentoo-stage3-amd64:latest    : Ok   gcc (Gentoo 8.3.0-r1 p1.1) 8.3.0
  39 mageia:5                      : Ok   gcc (GCC) 4.9.2, clang version 3.5.2 (tags/RELEASE_352/final)
  40 mageia:6                      : Ok   gcc (Mageia 5.5.0-1.mga6) 5.5.0, clang version 3.9.1 (tags/RELEASE_391/final)
  41 mageia:7                      : Ok   gcc (Mageia 8.3.1-0.20190524.1.mga7) 8.3.1 20190524, clang version 8.0.0 (Mageia 8.0.0-1.mga7)
  42 manjaro:latest                : Ok   gcc (GCC) 9.1.0, clang version 8.0.1 (tags/RELEASE_801/final)
  43 opensuse:15.0                 : Ok   gcc (SUSE Linux) 7.4.1 20190424 [gcc-7-branch revision 270538], clang version 5.0.1 (tags/RELEASE_501/final 312548)
  44 opensuse:15.1                 : Ok   gcc (SUSE Linux) 7.4.0, clang version 7.0.1 (tags/RELEASE_701/final 349238)
  45 opensuse:42.3                 : Ok   gcc (SUSE Linux) 4.8.5, clang version 3.8.0 (tags/RELEASE_380/final 262553)
  46 opensuse:tumbleweed           : Ok   gcc (SUSE Linux) 9.1.1 20190723 [gcc-9-branch revision 273734], clang version 8.0.0 (tags/RELEASE_800/final 356365)
  47 oraclelinux:6                 : Ok   gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23.0.1)
  48 oraclelinux:7                 : Ok   gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-36.0.1), clang version 3.4.2 (tags/RELEASE_34/dot2-final)
  49 oraclelinux:8                 : Ok   gcc (GCC) 8.2.1 20180905 (Red Hat 8.2.1-3.0.1), clang version 7.0.1 (tags/RELEASE_701/final)
  50 ubuntu:12.04                  : Ok   gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3
  51 ubuntu:14.04                  : Ok   gcc (Ubuntu 4.8.4-2ubuntu1~14.04.4) 4.8.4, Ubuntu clang version 3.4-1ubuntu3 (tags/RELEASE_34/final) (based on LLVM 3.4)
  52 ubuntu:16.04                  : Ok   gcc (Ubuntu 5.4.0-6ubuntu1~16.04.11) 5.4.0 20160609, clang version 3.8.0-2ubuntu4 (tags/RELEASE_380/final)
  53 ubuntu:16.04-x-arm            : Ok   arm-linux-gnueabihf-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
  54 ubuntu:16.04-x-arm64          : Ok   aarch64-linux-gnu-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
  55 ubuntu:16.04-x-powerpc        : Ok   powerpc-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
  56 ubuntu:16.04-x-powerpc64      : Ok   powerpc64-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
  57 ubuntu:16.04-x-powerpc64el    : Ok   powerpc64le-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
  58 ubuntu:16.04-x-s390           : Ok   s390x-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
  59 ubuntu:18.04                  : Ok   gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0, clang version 6.0.0-1ubuntu2 (tags/RELEASE_600/final)
  60 ubuntu:18.04-x-arm            : Ok   arm-linux-gnueabihf-gcc (Ubuntu/Linaro 7.4.0-1ubuntu1~18.04.1) 7.4.0
  61 ubuntu:18.04-x-arm64          : Ok   aarch64-linux-gnu-gcc (Ubuntu/Linaro 7.4.0-1ubuntu1~18.04.1) 7.4.0
  62 ubuntu:18.04-x-m68k           : Ok   m68k-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0
  63 ubuntu:18.04-x-powerpc        : Ok   powerpc-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0
  64 ubuntu:18.04-x-powerpc64      : Ok   powerpc64-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0
  65 ubuntu:18.04-x-powerpc64el    : Ok   powerpc64le-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0
  66 ubuntu:18.04-x-riscv64        : Ok   riscv64-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0
  67 ubuntu:18.04-x-s390           : Ok   s390x-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0
  68 ubuntu:18.04-x-sh4            : Ok   sh4-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0
  69 ubuntu:18.04-x-sparc64        : Ok   sparc64-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0
  70 ubuntu:18.10                  : Ok   gcc (Ubuntu 8.3.0-6ubuntu1~18.10.1) 8.3.0, clang version 7.0.0-3 (tags/RELEASE_700/final)
  71 ubuntu:19.04                  : Ok   gcc (Ubuntu 8.3.0-6ubuntu1) 8.3.0, clang version 8.0.0-3 (tags/RELEASE_800/final)
  72 ubuntu:19.04-x-alpha          : Ok   alpha-linux-gnu-gcc (Ubuntu 8.3.0-6ubuntu1) 8.3.0
  73 ubuntu:19.04-x-arm64          : Ok   aarch64-linux-gnu-gcc (Ubuntu/Linaro 8.3.0-6ubuntu1) 8.3.0
  74 ubuntu:19.04-x-hppa           : Ok   hppa-linux-gnu-gcc (Ubuntu 8.3.0-6ubuntu1) 8.3.0
  75 ubuntu:19.10                  : Ok   gcc (Ubuntu 9.1.0-9ubuntu2) 9.1.0, clang version 8.0.1-+rc4-1 (tags/RELEASE_801/rc4)
  # uname -a
  Linux quaco 5.2.6-200.fc30.x86_64 #1 SMP Mon Aug 5 13:20:47 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
  # git log --oneline -1
  8e6e5bea2e34 perf pmu-events: Fix missing "cpu_clk_unhalted.core" event
  # perf version --build-options
  perf version 5.3.rc2.g8e6e5bea2e34
                   dwarf: [ on  ]  # HAVE_DWARF_SUPPORT
      dwarf_getlocations: [ on  ]  # HAVE_DWARF_GETLOCATIONS_SUPPORT
                   glibc: [ on  ]  # HAVE_GLIBC_SUPPORT
                    gtk2: [ on  ]  # HAVE_GTK2_SUPPORT
           syscall_table: [ on  ]  # HAVE_SYSCALL_TABLE_SUPPORT
                  libbfd: [ on  ]  # HAVE_LIBBFD_SUPPORT
                  libelf: [ on  ]  # HAVE_LIBELF_SUPPORT
                 libnuma: [ on  ]  # HAVE_LIBNUMA_SUPPORT
  numa_num_possible_cpus: [ on  ]  # HAVE_LIBNUMA_SUPPORT
                 libperl: [ on  ]  # HAVE_LIBPERL_SUPPORT
               libpython: [ on  ]  # HAVE_LIBPYTHON_SUPPORT
                libslang: [ on  ]  # HAVE_SLANG_SUPPORT
               libcrypto: [ on  ]  # HAVE_LIBCRYPTO_SUPPORT
               libunwind: [ on  ]  # HAVE_LIBUNWIND_SUPPORT
      libdw-dwarf-unwind: [ on  ]  # HAVE_DWARF_SUPPORT
                    zlib: [ on  ]  # HAVE_ZLIB_SUPPORT
                    lzma: [ on  ]  # HAVE_LZMA_SUPPORT
               get_cpuid: [ on  ]  # HAVE_AUXTRACE_SUPPORT
                     bpf: [ on  ]  # HAVE_LIBBPF_SUPPORT
                     aio: [ on  ]  # HAVE_AIO_SUPPORT
                    zstd: [ on  ]  # HAVE_ZSTD_SUPPORT
  # perf test
   1: vmlinux symtab matches kallsyms                       : Ok
   2: Detect openat syscall event                           : Ok
   3: Detect openat syscall event on all cpus               : Ok
   4: Read samples using the mmap interface                 : Ok
   5: Test data source output                               : Ok
   6: Parse event definition strings                        : Ok
   7: Simple expression parser                              : Ok
   8: PERF_RECORD_* events & perf_sample fields             : Ok
   9: Parse perf pmu format                                 : Ok
  10: DSO data read                                         : Ok
  11: DSO data cache                                        : Ok
  12: DSO data reopen                                       : Ok
  13: Roundtrip evsel->name                                 : Ok
  14: Parse sched tracepoints fields                        : Ok
  15: syscalls:sys_enter_openat event fields                : Ok
  16: Setup struct perf_event_attr                          : Ok
  17: Match and link multiple hists                         : Ok
  18: 'import perf' in python                               : Ok
  19: Breakpoint overflow signal handler                    : Ok
  20: Breakpoint overflow sampling                          : Ok
  21: Breakpoint accounting                                 : Ok
  22: Watchpoint                                            :
  22.1: Read Only Watchpoint                                : Skip
  22.2: Write Only Watchpoint                               : Ok
  22.3: Read / Write Watchpoint                             : Ok
  22.4: Modify Watchpoint                                   : Ok
  23: Number of exit events of a simple workload            : Ok
  24: Software clock events period values                   : Ok
  25: Object code reading                                   : Ok
  26: Sample parsing                                        : Ok
  27: Use a dummy software event to keep tracking           : Ok
  28: Parse with no sample_id_all bit set                   : Ok
  29: Filter hist entries                                   : Ok
  30: Lookup mmap thread                                    : Ok
  31: Share thread mg                                       : Ok
  32: Sort output of hist entries                           : Ok
  33: Cumulate child hist entries                           : Ok
  34: Track with sched_switch                               : Ok
  35: Filter fds with revents mask in a fdarray             : Ok
  36: Add fd to a fdarray, making it autogrow               : Ok
  37: kmod_path__parse                                      : Ok
  38: Thread map                                            : Ok
  39: LLVM search and compile                               :
  39.1: Basic BPF llvm compile                              : Ok
  39.2: kbuild searching                                    : Ok
  39.3: Compile source for BPF prologue generation          : Ok
  39.4: Compile source for BPF relocation                   : Ok
  40: Session topology                                      : Ok
  41: BPF filter                                            :
  41.1: Basic BPF filtering                                 : Ok
  41.2: BPF pinning                                         : Ok
  41.3: BPF prologue generation                             : Ok
  41.4: BPF relocation checker                              : Ok
  42: Synthesize thread map                                 : Ok
  43: Remove thread map                                     : Ok
  44: Synthesize cpu map                                    : Ok
  45: Synthesize stat config                                : Ok
  46: Synthesize stat                                       : Ok
  47: Synthesize stat round                                 : Ok
  48: Synthesize attr update                                : Ok
  49: Event times                                           : Ok
  50: Read backward ring buffer                             : Ok
  51: Print cpu map                                         : Ok
  52: Probe SDT events                                      : Ok
  53: is_printable_array                                    : Ok
  54: Print bitmap                                          : Ok
  55: perf hooks                                            : Ok
  56: builtin clang support                                 : Skip (not compiled in)
  57: unit_number__scnprintf                                : Ok
  58: mem2node                                              : Ok
  59: time utils                                            : Ok
  60: map_groups__merge_in                                  : Ok
  61: x86 rdpmc                                             : Ok
  62: Convert perf time to TSC                              : Ok
  63: DWARF unwind                                          : Ok
  64: x86 instruction decoder - new instructions            : Ok
  65: Intel PT packet decoder                               : Ok
  66: x86 bp modify                                         : Ok
  67: probe libc's inet_pton & backtrace it with ping       : Ok
  68: Use vfs_getname probe to get syscall args filenames   : Ok
  69: Add vfs_getname probe to get syscall args filenames   : Ok
  70: Check open filename arg using perf trace + vfs_getname: Ok
  71: Zstd perf.data compression/decompression              : Ok

This is with the following patches that are upstream already, we'll get it at the next merge with Linus':

4be6e05c4d4c ("libbpf: Avoid designated initializers for unnamed union members") cdb2f9207109 ("libbpf: Fix endianness macro usage for some compilers")

  $ make -C tools/perf build-test
  make: Entering directory '/home/acme/git/perf/tools/perf'
  - tarpkg: ./tests/perf-targz-src-pkg .
              make_no_libelf_O: make NO_LIBELF=1
                make_install_O: make install
                 make_perf_o_O: make perf.o
                  make_no_ui_O: make NO_NEWT=1 NO_SLANG=1 NO_GTK2=1
             make_no_scripts_O: make NO_LIBPYTHON=1 NO_LIBPERL=1
           make_no_backtrace_O: make NO_BACKTRACE=1
             make_util_map_o_O: make util/map.o
                   make_tags_O: make tags
  make_no_libdw_dwarf_unwind_O: make NO_LIBDW_DWARF_UNWIND=1
           make_no_libunwind_O: make NO_LIBUNWIND=1
            make_no_auxtrace_O: make NO_AUXTRACE=1
              make_no_libbpf_O: make NO_LIBBPF=1
             make_no_libperl_O: make NO_LIBPERL=1
                   make_help_O: make help
               make_no_slang_O: make NO_SLANG=1
         make_install_prefix_O: make install prefix=/tmp/krava
        make_with_babeltrace_O: make LIBBABELTRACE=1
            make_no_libaudit_O: make NO_LIBAUDIT=1
            make_no_demangle_O: make NO_DEMANGLE=1
            make_install_bin_O: make install-bin
                 make_static_O: make LDFLAGS=-static
         make_with_clangllvm_O: make LIBCLANGLLVM=1
                make_no_gtk2_O: make NO_GTK2=1
   make_install_prefix_slash_O: make install prefix=/tmp/krava/
                  make_debug_O: make DEBUG=1
                 make_cscope_O: make cscope
             make_no_libnuma_O: make NO_LIBNUMA=1
       make_util_pmu_bison_o_O: make util/pmu-bison.o
           make_no_libpython_O: make NO_LIBPYTHON=1
              make_clean_all_O: make clean all
           make_no_libbionic_O: make NO_LIBBIONIC=1
                make_minimal_O: make NO_LIBPERL=1 NO_LIBPYTHON=1 NO_NEWT=1 NO_GTK2=1 NO_DEMANGLE=1 NO_LIBELF=1 NO_LIBUNWIND=1 NO_BACKTRACE=1 NO_LIBNUMA=1 NO_LIBAUDIT=1 NO_LIBBIONIC=1 NO_LIBDW_DWARF_UNWIND=1 NO_AUXTRACE=1 NO_LIBBPF=1 NO_LIBCRYPTO=1 NO_SDT=1 NO_JVMTI=1 NO_LIBZSTD=1
                    make_doc_O: make doc
                make_no_newt_O: make NO_NEWT=1
                   make_pure_O: make
  OK
  make: Leaving directory '/home/acme/git/perf/tools/perf'
  $
author maintainer
#1 lore raw

PATCH 1/10 perf bench numa: Fix cpu0 binding

From: Jiri Olsa <[email protected]>

Michael reported an issue with perf bench numa failing with binding to cpu0 with '-0' option.

  # perf bench numa mem -p 3 -t 1 -P 512 -s 100 -zZcm0 --thp 1 -M 1 -ddd
  # Running 'numa/mem' benchmark:

# Running main, "perf bench numa numa-mem -p 3 -t 1 -P 512 -s 100 -zZcm0 --thp 1 -M 1 -ddd"
binding to node 0, mask: 0000000000000001 => -1
perf: bench/numa.c:356: bind_to_memnode: Assertion `!(ret)' failed.
Aborted (core dumped)

This happens when the cpu0 is not part of node0, which is the benchmark assumption and we can see that's not the case for some powerpc servers.

Using correct node for cpu0 binding.

---
 tools/perf/bench/numa.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
tools/perf/bench/numa.c +4 -2
index a640ca7aaada..513cb2f2fa32 100644
@@ -379,8 +379,10 @@ static u8 *alloc_data(ssize_t bytes0, int map_flags,
 
 	/* Allocate and initialize all memory on CPU#0: */
 	if (init_cpu0) {
-		orig_mask = bind_to_node(0);
-		bind_to_memnode(0);
+		int node = numa_node_of_cpu(0);
+
+		orig_mask = bind_to_node(node);
+		bind_to_memnode(node);
 	}
 
 	bytes = bytes0 + HPSIZE;
Signature · 1 line
2.21.0
author maintainer
#2 lore raw

PATCH 2/10 perf annotate: Fix printing of unaugmented disassembled instructions from BPF

In reply to Arnaldo Carvalho de Melo

From: Arnaldo Carvalho de Melo <[email protected]>

The code to disassemble BPF programs uses binutil's disassembling routines, and those use in turn fprintf to print to a memstream FILE, adding a newline at the end of each line, which ends up confusing the TUI routines called from:

annotate_browser__write()
annotate_line__write()
annotate_browser__printf()
ui_browser__vprintf()
SLsmg_vprintf()

The SLsmg_vprintf() function in the slang library gets confused with the terminating newline, so make the disasm_line__parse() function that parses the lines produced by the BPF specific disassembler (that uses binutil's libopcodes) and the lines produced by the objdump based disassembler used for everything else (and that doesn't adds this terminating newline) trim the end of the line in addition of the beginning.

This way when disasm_line->ops.raw, i.e. for instructions without a special scnprintf() method, we'll not have that \n getting in the way of filling the screen right after the instruction with spaces to avoid leaving what was on the screen before and thus garbling the annotation screen, breaking scrolling, etc.

Cc Adrian Hunter <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Song Liu <[email protected]>
Fixes 6987561c9e86 ("perf annotate: Enable annotation of BPF programs")
---
 tools/perf/util/annotate.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/perf/util/annotate.c +1 -1
index ac9ad2330f93..163536720149 100644
@@ -1122,7 +1122,7 @@ static int disasm_line__parse(char *line, const char **namep, char **rawp)
 		goto out;
 
 	(*rawp)[0] = tmp;
-	*rawp = skip_spaces(*rawp);
+	*rawp = strim(*rawp);
 
 	return 0;
 
Signature · 1 line
2.21.0
author maintainer
#3 lore raw

PATCH 3/10 perf db-export: Fix thread__exec_comm()

In reply to Arnaldo Carvalho de Melo

From: Adrian Hunter <[email protected]>

Threads synthesized from /proc have comms with a start time of zero, and not marked as "exec". Currently, there can be 2 such comms. The first is created by processing a synthesized fork event and is set to the parent's comm string, and the second by processing a synthesized comm event set to the thread's current comm string.

In the absence of an "exec" comm, thread__exec_comm() picks the last (oldest) comm, which, in the case above, is the parent's comm string. For a main thread, that is very probably wrong. Use the second-to-last in that case.

This affects only db-export because it is the only user of thread__exec_comm().

Example:

  $ sudo perf record -a -o pt-a-sleep-1 -e intel_pt//u -- sleep 1
  $ sudo chown ahunter pt-a-sleep-1

Before:

  $ perf script -i pt-a-sleep-1 --itrace=bep -s tools/perf/scripts/python/export-to-sqlite.py pt-a-sleep-1.db branches calls
  $ sqlite3 -header -column pt-a-sleep-1.db 'select * from comm_threads_view'
  comm_id     command     thread_id   pid         tid
  ----------  ----------  ----------  ----------  ----------
  1           swapper     1           0           0
  2           rcu_sched   2           10          10
  3           kthreadd    3           78          78
  5           sudo        4           15180       15180
  5           sudo        5           15180       15182
  7           kworker/4:  6           10335       10335
  8           kthreadd    7           55          55
  10          systemd     8           865         865
  10          systemd     9           865         875
  13          perf        10          15181       15181
  15          sleep       10          15181       15181
  16          kworker/3:  11          14179       14179
  17          kthreadd    12          29376       29376
  19          systemd     13          746         746
  21          systemd     14          401         401
  23          systemd     15          879         879
  23          systemd     16          879         945
  25          kthreadd    17          556         556
  27          kworker/u1  18          14136       14136
  28          kworker/u1  19          15021       15021
  29          kthreadd    20          509         509
  31          systemd     21          836         836
  31          systemd     22          836         967
  33          systemd     23          1148        1148
  33          systemd     24          1148        1163
  35          kworker/2:  25          17988       17988
  36          kworker/0:  26          13478       13478

After:

  $ perf script -i pt-a-sleep-1 --itrace=bep -s tools/perf/scripts/python/export-to-sqlite.py pt-a-sleep-1b.db branches calls
  $ sqlite3 -header -column pt-a-sleep-1b.db 'select * from comm_threads_view'
  comm_id     command     thread_id   pid         tid
  ----------  ----------  ----------  ----------  ----------
  1           swapper     1           0           0
  2           rcu_sched   2           10          10
  3           kswapd0     3           78          78
  4           perf        4           15180       15180
  4           perf        5           15180       15182
  6           kworker/4:  6           10335       10335
  7           kcompactd0  7           55          55
  8           accounts-d  8           865         865
  8           accounts-d  9           865         875
  10          perf        10          15181       15181
  12          sleep       10          15181       15181
  13          kworker/3:  11          14179       14179
  14          kworker/1:  12          29376       29376
  15          haveged     13          746         746
  16          systemd-jo  14          401         401
  17          NetworkMan  15          879         879
  17          NetworkMan  16          879         945
  19          irq/131-iw  17          556         556
  20          kworker/u1  18          14136       14136
  21          kworker/u1  19          15021       15021
  22          kworker/u1  20          509         509
  23          thermald    21          836         836
  23          thermald    22          836         967
  25          unity-sett  23          1148        1148
  25          unity-sett  24          1148        1163
  27          kworker/2:  25          17988       17988
  28          kworker/0:  26          13478       13478
Cc Jiri Olsa <[email protected]>
Fixes 65de51f93ebf ("perf tools: Identify which comms are from exec")
---
 tools/perf/util/thread.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)
tools/perf/util/thread.c +11 -1
index 873ab505ca80..590793cc5142 100644
@@ -214,14 +214,24 @@ struct comm *thread__comm(const struct thread *thread)
 
 struct comm *thread__exec_comm(const struct thread *thread)
 {
-	struct comm *comm, *last = NULL;
+	struct comm *comm, *last = NULL, *second_last = NULL;
 
 	list_for_each_entry(comm, &thread->comm_list, list) {
 		if (comm->exec)
 			return comm;
+		second_last = last;
 		last = comm;
 	}
 
+	/*
+	 * 'last' with no start time might be the parent's comm of a synthesized
+	 * thread (created by processing a synthesized fork event). For a main
+	 * thread, that is very probably wrong. Prefer a later comm to avoid
+	 * that case.
+	 */
+	if (second_last && !last->start && thread->pid_ == thread->tid)
+		return second_last;
+
 	return last;
 }
 
Signature · 1 line
2.21.0
author maintainer
#4 lore raw

PATCH 4/10 perf ftrace: Fix failure to set cpumask when only one cpu is present

In reply to Arnaldo Carvalho de Melo

From: He Zhe <[email protected]>

The buffer containing the string used to set cpumask is overwritten at the end of the string later in cpu_map__snprint_mask due to not enough memory space, when there is only one cpu.

And thus causes the following failure:

  $ perf ftrace ls
  failed to reset ftrace
  $

This patch fixes the calculation of the cpumask string size.

Cc Alexander Shishkin <[email protected]>
Cc Alexey Budankov <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Kan Liang <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Stephane Eranian <[email protected]>
Fixes dc23103278c5 ("perf ftrace: Add support for -a and -C option")
---
 tools/perf/builtin-ftrace.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/perf/builtin-ftrace.c +1 -1
index 66d5a6658daf..019312810405 100644
@@ -173,7 +173,7 @@ static int set_tracing_cpumask(struct cpu_map *cpumap)
 	int last_cpu;
 
 	last_cpu = cpu_map__cpu(cpumap, cpumap->nr - 1);
-	mask_size = (last_cpu + 3) / 4 + 1;
+	mask_size = last_cpu / 4 + 2; /* one more byte for EOS */
 	mask_size += last_cpu / 32; /* ',' is needed for every 32th cpus */
 
 	cpumask = malloc(mask_size);
Signature · 1 line
2.21.0
author maintainer
#5 lore raw

PATCH 5/10 perf cpumap: Fix writing to illegal memory in handling cpumap mask

In reply to Arnaldo Carvalho de Melo

From: He Zhe <[email protected]>

cpu_map__snprint_mask() would write to illegal memory pointed by zalloc(0) when there is only one cpu.

This patch fixes the calculation and adds sanity check against the input parameters.

Cc Alexander Shishkin <[email protected]>
Cc Alexey Budankov <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Kan Liang <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Stephane Eranian <[email protected]>
Fixes 4400ac8a9a90 ("perf cpumap: Introduce cpu_map__snprint_mask()")
---
 tools/perf/util/cpumap.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
tools/perf/util/cpumap.c +4 -1
index 3acfbe34ebaf..39cce66b4ebc 100644
@@ -751,7 +751,10 @@ size_t cpu_map__snprint_mask(struct cpu_map *map, char *buf, size_t size)
 	unsigned char *bitmap;
 	int last_cpu = cpu_map__cpu(map, map->nr - 1);
 
-	bitmap = zalloc((last_cpu + 7) / 8);
+	if (buf == NULL)
+		return 0;
+
+	bitmap = zalloc(last_cpu / 8 + 1);
 	if (bitmap == NULL) {
 		buf[0] = '\0';
 		return 0;
Signature · 1 line
2.21.0
author maintainer
#6 lore raw

PATCH 6/10 perf tools: Fix a typo in a variable name in the Documentation Makefile

In reply to Arnaldo Carvalho de Melo

From: Masanari Iida <[email protected]>

This patch fix a spelling typo in a variable name in the Documentation Makefile.

---
 tools/perf/Documentation/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/perf/Documentation/Makefile +1 -1
index 6d148a40551c..adc5a7e44b98 100644
@@ -242,7 +242,7 @@ $(OUTPUT)doc.dep : $(wildcard *.txt) build-docdep.perl
 	$(PERL_PATH) ./build-docdep.perl >$@+ $(QUIET_STDERR) && \
 	mv $@+ $@
 
--include $(OUPTUT)doc.dep
+-include $(OUTPUT)doc.dep
 
 _cmds_txt = cmds-ancillaryinterrogators.txt \
 	cmds-ancillarymanipulators.txt \
Signature · 1 line
2.21.0
author maintainer
#7 lore raw

PATCH 7/10 perf tools: Fix include paths in ui directory

In reply to Arnaldo Carvalho de Melo

From: Ian Rogers <[email protected]>

These paths point to the wrong location but still work because they get picked up by a -I flag that happens to direct to the correct file. Fix paths to point to the correct location without -I flags.

---
 tools/perf/ui/browser.c      | 9 +++++----
 tools/perf/ui/tui/progress.c | 2 +-
 2 files changed, 6 insertions(+), 5 deletions(-)
tools/perf/ui/browser.c +5 -4
index f80c51d53565..d227d74b28f8 100644
@@ -1,7 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
-#include "../string2.h"
-#include "../config.h"
-#include "../../perf.h"
+#include "../util/util.h"
+#include "../util/string2.h"
+#include "../util/config.h"
+#include "../perf.h"
 #include "libslang.h"
 #include "ui.h"
 #include "util.h"
@@ -14,7 +15,7 @@
 #include "browser.h"
 #include "helpline.h"
 #include "keysyms.h"
-#include "../color.h"
+#include "../util/color.h"
 #include <linux/ctype.h>
 #include <linux/zalloc.h>
 
tools/perf/ui/tui/progress.c +1 -1
index bc134b82829d..5a24dd3ce4db 100644
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <linux/kernel.h>
-#include "../cache.h"
+#include "../../util/cache.h"
 #include "../progress.h"
 #include "../libslang.h"
 #include "../ui.h"
Signature · 1 line
2.21.0
author maintainer
#8 lore raw

PATCH 8/10 perf record: Fix module size on s390

In reply to Arnaldo Carvalho de Melo

From: Thomas Richter <[email protected]>

On s390 the modules loaded in memory have the text segment located after the GOT and Relocation table. This can be seen with this output:

[root@m35lp76 perf]# fgrep qeth /proc/modules qeth 151552 1 qeth_l2, Live 0x000003ff800b2000
...
[root@m35lp76 perf]# cat /sys/module/qeth/sections/.text 0x000003ff800b3990
[root@m35lp76 perf]#

There is an offset of 0x1990 bytes. The size of the qeth module is 151552 bytes (0x25000 in hex).

The location of the GOT/relocation table at the beginning of a module is unique to s390.

commit 203d8a4aa6ed ("perf s390: Fix 'start' address of module's map") adjusts the start address of a module in the map structures, but does not adjust the size of the modules. This leads to overlapping of module maps as this example shows:

[root@m35lp76 perf] # ./perf report -D

     0 0 0xfb0 [0xa0]: PERF_RECORD_MMAP -1/0: [0x3ff800b3990(0x25000)
          @ 0]:  x /lib/modules/.../qeth.ko.xz
     0 0 0x1050 [0xb0]: PERF_RECORD_MMAP -1/0: [0x3ff800d85a0(0x8000)
          @ 0]:  x /lib/modules/.../ip6_tables.ko.xz

The module qeth.ko has an adjusted start address modified to b3990, but its size is unchanged and the module ends at 0x3ff800d8990. This end address overlaps with the next modules start address of 0x3ff800d85a0.

When the size of the leading GOT/Relocation table stored in the beginning of the text segment (0x1990 bytes) is subtracted from module qeth end address, there are no overlaps anymore:

0x3ff800d8990 - 0x1990 = 0x0x3ff800d7000

which is the same as

0x3ff800b2000 + 0x25000 = 0x0x3ff800d7000.

To fix this issue, also adjust the modules size in function arch__fix_module_text_start(). Add another function parameter named size and reduce the size of the module when the text segment start address is changed.

Output after:

     0 0 0xfb0 [0xa0]: PERF_RECORD_MMAP -1/0: [0x3ff800b3990(0x23670)
          @ 0]:  x /lib/modules/.../qeth.ko.xz
     0 0 0x1050 [0xb0]: PERF_RECORD_MMAP -1/0: [0x3ff800d85a0(0x7a60)
          @ 0]:  x /lib/modules/.../ip6_tables.ko.xz
---
 tools/perf/arch/s390/util/machine.c | 14 +++++++++++++-
 tools/perf/util/machine.c           |  3 ++-
 tools/perf/util/machine.h           |  2 +-
 3 files changed, 16 insertions(+), 3 deletions(-)
tools/perf/arch/s390/util/machine.c +13 -1
index a19690a17291..de26b1441a48 100644
@@ -7,7 +7,7 @@
 #include "api/fs/fs.h"
 #include "debug.h"
 
-int arch__fix_module_text_start(u64 *start, const char *name)
+int arch__fix_module_text_start(u64 *start, u64 *size, const char *name)
 {
 	u64 m_start = *start;
 	char path[PATH_MAX];
@@ -17,6 +17,18 @@ int arch__fix_module_text_start(u64 *start, const char *name)
 	if (sysfs__read_ull(path, (unsigned long long *)start) < 0) {
 		pr_debug2("Using module %s start:%#lx\n", path, m_start);
 		*start = m_start;
+	} else {
+		/* Successful read of the modules segment text start address.
+		 * Calculate difference between module start address
+		 * in memory and module text segment start address.
+		 * For example module load address is 0x3ff8011b000
+		 * (from /proc/modules) and module text segment start
+		 * address is 0x3ff8011b870 (from file above).
+		 *
+		 * Adjust the module size and subtract the GOT table
+		 * size located at the beginning of the module.
+		 */
+		*size -= (*start - m_start);
 	}
 
 	return 0;
tools/perf/util/machine.c +2 -1
index cf826eca3aaf..83b2fbbeeb90 100644
@@ -1378,6 +1378,7 @@ static int machine__set_modules_path(struct machine *machine)
 	return map_groups__set_modules_path_dir(&machine->kmaps, modules_path, 0);
 }
 int __weak arch__fix_module_text_start(u64 *start __maybe_unused,
+				u64 *size __maybe_unused,
 				const char *name __maybe_unused)
 {
 	return 0;
@@ -1389,7 +1390,7 @@ static int machine__create_module(void *arg, const char *name, u64 start,
 	struct machine *machine = arg;
 	struct map *map;
 
-	if (arch__fix_module_text_start(&start, name) < 0)
+	if (arch__fix_module_text_start(&start, &size, name) < 0)
 		return -1;
 
 	map = machine__findnew_module_map(machine, start, name);
tools/perf/util/machine.h +1 -1
index f70ab98a7bde..7aa38da26427 100644
@@ -222,7 +222,7 @@ struct symbol *machine__find_kernel_symbol_by_name(struct machine *machine,
 
 struct map *machine__findnew_module_map(struct machine *machine, u64 start,
 					const char *filename);
-int arch__fix_module_text_start(u64 *start, const char *name);
+int arch__fix_module_text_start(u64 *start, u64 *size, const char *name);
 
 int machine__load_kallsyms(struct machine *machine, const char *filename);
 
Signature · 1 line
2.21.0
author maintainer
#9 lore raw

PATCH 9/10 perf annotate: Fix s390 gap between kernel end and module start

In reply to Arnaldo Carvalho de Melo

From: Thomas Richter <[email protected]>

During execution of command 'perf top' the error message:

Not enough memory for annotating '__irf_end' symbol!)

is emitted from this call sequence:
__cmd_top
perf_top__mmap_read
perf_top__mmap_read_idx
perf_event__process_sample
hist_entry_iter__add
hist_iter__top_callback
perf_top__record_precise_ip
hist_entry__inc_addr_samples
symbol__inc_addr_samples
symbol__get_annotation
symbol__alloc_hist

In this function the size of symbol __irf_end is calculated. The size of a symbol is the difference between its start and end address.

When the symbol was read the first time, its start and end was set to:

symbol__new: __irf_end 0xe954d0-0xe954d0

which is correct and maps with /proc/kallsyms:

   root@s8360046:~/linux-4.15.0/tools/perf# fgrep _irf_end /proc/kallsyms
   0000000000e954d0 t __irf_end
   root@s8360046:~/linux-4.15.0/tools/perf#

In function symbol__alloc_hist() the end of symbol __irf_end is

symbol__alloc_hist sym:__irf_end start:0xe954d0 end:0x3ff80045a8

which is identical with the first module entry in /proc/kallsyms

This results in a symbol size of __irf_req for histogram analyses of 70334140059072 bytes and a malloc() for this requested size fails.

The root cause of this is function
__dso__load_kallsyms()
+-> symbols__fixup_end()

Function symbols__fixup_end() enlarges the last symbol in the kallsyms map:

   # fgrep __irf_end /proc/kallsyms
   0000000000e954d0 t __irf_end
   #

to the start address of the first module:

   # cat /proc/kallsyms | sort  | egrep ' [tT] '
   ....
   0000000000e952d0 T __security_initcall_end
   0000000000e954d0 T __initramfs_size
   0000000000e954d0 t __irf_end
   000003ff800045a8 T fc_get_event_number       [scsi_transport_fc]
   000003ff800045d0 t store_fc_vport_disable    [scsi_transport_fc]
   000003ff800046a8 T scsi_is_fc_rport  [scsi_transport_fc]
   000003ff800046d0 t fc_target_setup   [scsi_transport_fc]

On s390 the kernel is located around memory address 0x200, 0x10000 or 0x100000, depending on linux version. Modules however start some- where around 0x3ff xxxx xxxx.

This is different than x86 and produces a large gap for which histogram allocation fails.

Fix this by detecting the kernel's last symbol and do no adjustment for it. Introduce a weak function and handle s390 specifics.

---
 tools/perf/arch/s390/util/machine.c | 17 +++++++++++++++++
 tools/perf/util/symbol.c            |  7 ++++++-
 tools/perf/util/symbol.h            |  1 +
 3 files changed, 24 insertions(+), 1 deletion(-)
tools/perf/arch/s390/util/machine.c +17 -0
index de26b1441a48..c8c86a0c9b79 100644
@@ -6,6 +6,7 @@
 #include "machine.h"
 #include "api/fs/fs.h"
 #include "debug.h"
+#include "symbol.h"
 
 int arch__fix_module_text_start(u64 *start, u64 *size, const char *name)
 {
@@ -33,3 +34,19 @@ int arch__fix_module_text_start(u64 *start, u64 *size, const char *name)
 
 	return 0;
 }
+
+/* On s390 kernel text segment start is located at very low memory addresses,
+ * for example 0x10000. Modules are located at very high memory addresses,
+ * for example 0x3ff xxxx xxxx. The gap between end of kernel text segment
+ * and beginning of first module's text segment is very big.
+ * Therefore do not fill this gap and do not assign it to the kernel dso map.
+ */
+void arch__symbols__fixup_end(struct symbol *p, struct symbol *c)
+{
+	if (strchr(p->name, '[') == NULL && strchr(c->name, '['))
+		/* Last kernel symbol mapped to end of page */
+		p->end = roundup(p->end, page_size);
+	else
+		p->end = c->start;
+	pr_debug4("%s sym:%s end:%#lx\n", __func__, p->name, p->end);
+}
tools/perf/util/symbol.c +6 -1
index 173f3378aaa0..4efde7879474 100644
@@ -92,6 +92,11 @@ static int prefix_underscores_count(const char *str)
 	return tail - str;
 }
 
+void __weak arch__symbols__fixup_end(struct symbol *p, struct symbol *c)
+{
+	p->end = c->start;
+}
+
 const char * __weak arch__normalize_symbol_name(const char *name)
 {
 	return name;
@@ -218,7 +223,7 @@ void symbols__fixup_end(struct rb_root_cached *symbols)
 		curr = rb_entry(nd, struct symbol, rb_node);
 
 		if (prev->end == prev->start && prev->end != curr->start)
-			prev->end = curr->start;
+			arch__symbols__fixup_end(prev, curr);
 	}
 
 	/* Last entry */
tools/perf/util/symbol.h +1 -0
index 12755b42ea93..183f630cb5f1 100644
@@ -288,6 +288,7 @@ const char *arch__normalize_symbol_name(const char *name);
 #define SYMBOL_A 0
 #define SYMBOL_B 1
 
+void arch__symbols__fixup_end(struct symbol *p, struct symbol *c);
 int arch__compare_symbol_names(const char *namea, const char *nameb);
 int arch__compare_symbol_names_n(const char *namea, const char *nameb,
 				 unsigned int n);
Signature · 1 line
2.21.0
author maintainer
#10 lore raw

PATCH 10/10 perf pmu-events: Fix missing "cpu_clk_unhalted.core" event

In reply to Arnaldo Carvalho de Melo

From: Jin Yao <[email protected]>

The events defined in pmu-events JSON are parsed and added into perf tool. For fixed counters, we handle the encodings between JSON and perf by using a static array fixed[].

But the fixed[] has missed an important event "cpu_clk_unhalted.core".

For example, on the Tremont platform,

[root@localhost ~]# perf stat -e cpu_clk_unhalted.core -a event syntax error: 'cpu_clk_unhalted.core'
\___ parser error

With this patch, the event cpu_clk_unhalted.core can be parsed.

[root@localhost perf]# ./perf stat -e cpu_clk_unhalted.core -a -vvv
------------------------------------------------------------
perf_event_attr:

    type                             4
    size                             112
    config                           0x3c
    sample_type                      IDENTIFIER
    read_format                      TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
    disabled                         1
    inherit                          1
    exclude_guest                    1

------------------------------------------------------------
...

---
 tools/perf/pmu-events/jevents.c | 1 +
 1 file changed, 1 insertion(+)
tools/perf/pmu-events/jevents.c +1 -0
index 1a91a197cafb..d413761621b0 100644
@@ -453,6 +453,7 @@ static struct fixed {
 	{ "inst_retired.any_p", "event=0xc0" },
 	{ "cpu_clk_unhalted.ref", "event=0x0,umask=0x03" },
 	{ "cpu_clk_unhalted.thread", "event=0x3c" },
+	{ "cpu_clk_unhalted.core", "event=0x3c" },
 	{ "cpu_clk_unhalted.thread_any", "event=0x3c,any=1" },
 	{ NULL, NULL},
 };
Signature · 1 line
2.21.0