mm: memcontrol: flush slab vmstats on kmem offlining
Subsystems (2)
PATCH 1/1 mm: memcontrol: flush slab vmstats on kmem offlining
I've noticed that the "slab" value in memory.stat is sometimes 0, even if some children memory cgroups have a non-zero "slab" value. The following investigation showed that this is the result of the kmem_cache reparenting in combination with the per-cpu batching of slab vmstats.
At the offlining some vmstat value may leave in the percpu cache, not being propagated upwards by the cgroup hierarchy. It means that stats on ancestor levels are lower than actual. Later when slab pages are released, the precise number of pages is substracted on the parent level, making the value negative. We don't show negative values, 0 is printed instead.
To fix this issue, let's flush percpu slab memcg and lruvec stats on memcg offlining. This guarantees that numbers on all ancestor levels are accurate and match the actual number of outstanding slab pages.
--- mm/memcontrol.c | 51 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+)
mm/memcontrol.c +51 -0
@@ -3412,6 +3412,50 @@ static int memcg_online_kmem(struct mem_cgroup *memcg)return 0 ; } +static void memcg_flush_slab_node_stats (struct mem_cgroup *memcg,int node) +{ +struct mem_cgroup_per_node *pn = memcg->nodeinfo[node]; +struct mem_cgroup_per_node *pi; +unsigned long recl =0 , unrecl =0 ; +int cpu; + +for_each_possible_cpu (cpu) { + recl +=raw_cpu_read ( + pn->lruvec_stat_cpu->count[NR_SLAB_RECLAIMABLE ]); + unrecl +=raw_cpu_read ( + pn->lruvec_stat_cpu->count[NR_SLAB_UNRECLAIMABLE ]); + } + +for (pi = pn; pi; pi =parent_nodeinfo (pi, node)) { +atomic_long_add (recl, + &pi->lruvec_stat[NR_SLAB_RECLAIMABLE ]); +atomic_long_add (unrecl, + &pi->lruvec_stat[NR_SLAB_UNRECLAIMABLE ]); + } +} + +static void memcg_flush_slab_vmstats (struct mem_cgroup *memcg) +{ +struct mem_cgroup *mi; +unsigned long recl =0 , unrecl =0 ; +int node, cpu; + +for_each_possible_cpu (cpu) { + recl +=raw_cpu_read ( + memcg->vmstats_percpu->stat[NR_SLAB_RECLAIMABLE ]); + unrecl +=raw_cpu_read ( + memcg->vmstats_percpu->stat[NR_SLAB_UNRECLAIMABLE ]); + } + +for (mi = memcg; mi; mi =parent_mem_cgroup (mi)) { +atomic_long_add (recl, &mi->vmstats[NR_SLAB_RECLAIMABLE ]); +atomic_long_add (unrecl, &mi->vmstats[NR_SLAB_UNRECLAIMABLE ]); + } + +for_each_node (node) +memcg_flush_slab_node_stats (memcg, node); +} +static void memcg_offline_kmem (struct mem_cgroup *memcg) {struct cgroup_subsys_state *css;
@@ -3432,7 +3476,14 @@ static void memcg_offline_kmem(struct mem_cgroup *memcg)if (!parent) parent = root_mem_cgroup; +/* +* Deactivate and reparent kmem_caches. Then Flush percpu +* slab statistics to have precise values at the parent and +* all ancestor levels. It's required to keep slab stats +* accurate after the reparenting of kmem_caches. +*/ memcg_deactivate_kmem_caches (memcg, parent); +memcg_flush_slab_vmstats (memcg); kmemcg_id = memcg->kmemcg_id;BUG_ON (kmemcg_id <0 );
Signature · 1 line
2.21.0
Andrew Morton
maintainerQuoted 13 lines · On Thu, 8 Aug 2019 13:36:04 -0700 Roman Gushchin <[email protected]> wrote:
I've noticed that the "slab" value in memory.stat is sometimes 0, even if some children memory cgroups have a non-zero "slab" value. The following investigation showed that this is the result of the
kmem_cachereparenting in combination with the per-cpu batching of slab vmstats.At the offlining some vmstat value may leave in the percpu cache, not being propagated upwards by the cgroup hierarchy. It means that stats on ancestor levels are lower than actual. Later when slab pages are released, the precise number of pages is substracted on the parent level, making the value negative. We don't show negative values, 0 is printed instead.
Quoted 5 lines
To fix this issue, let's flush percpu slab memcg and lruvec stats on memcg offlining. This guarantees that numbers on all ancestor levels are accurate and match the actual number of outstanding slab pages.
Looks expensive. How frequently can these functions be called?
Quoted 38 lines
mm/memcontrol.c +32
-0@@ -3412,6 +3412,50 @@ static int memcg_online_kmem(struct mem_cgroup *memcg)return 0 ; } +static void memcg_flush_slab_node_stats (struct mem_cgroup *memcg,int node) +{ +struct mem_cgroup_per_node *pn = memcg->nodeinfo[node]; +struct mem_cgroup_per_node *pi; +unsigned long recl =0 , unrecl =0 ; +int cpu; + +for_each_possible_cpu (cpu) { + recl +=raw_cpu_read ( + pn->lruvec_stat_cpu->count[NR_SLAB_RECLAIMABLE ]); + unrecl +=raw_cpu_read ( + pn->lruvec_stat_cpu->count[NR_SLAB_UNRECLAIMABLE ]); + } + +for (pi = pn; pi; pi =parent_nodeinfo (pi, node)) { +atomic_long_add (recl, + &pi->lruvec_stat[NR_SLAB_RECLAIMABLE ]); +atomic_long_add (unrecl, + &pi->lruvec_stat[NR_SLAB_UNRECLAIMABLE ]); + } +} + +static void memcg_flush_slab_vmstats (struct mem_cgroup *memcg) +{ +struct mem_cgroup *mi; +unsigned long recl =0 , unrecl =0 ; +int node, cpu; + +for_each_possible_cpu (cpu) { + recl +=raw_cpu_read ( + memcg->vmstats_percpu->stat[NR_SLAB_RECLAIMABLE ]); + unrecl += raw_cpu_read(
mm/memcontrol.c static int memcg_online_kmem(struct mem_cgroup *memcg) · line 3456
Quoted 10 lines
mm/memcontrol.c +10
-0+ memcg->vmstats_percpu->stat[NR_SLAB_UNRECLAIMABLE]); + } + +for (mi = memcg; mi; mi =parent_mem_cgroup (mi)) { +atomic_long_add (recl, &mi->vmstats[NR_SLAB_RECLAIMABLE ]); +atomic_long_add (unrecl, &mi->vmstats[NR_SLAB_UNRECLAIMABLE ]); + } + +for_each_node (node) +memcg_flush_slab_node_stats (memcg, node);
This loops across all possible CPUs once for each possible node. Ouch.
Implementing hotplug handlers in here (which is surprisingly simple) brings this down to num_online_nodes * num_online_cpus which is, I think, potentially vastly better.
Quoted 15 lines · Andrew Morton
Quoted 13 lines · On Thu, 8 Aug 2019 13:36:04 -0700 Roman Gushchin <[email protected]> wrote:
I've noticed that the "slab" value in memory.stat is sometimes 0, even if some children memory cgroups have a non-zero "slab" value. The following investigation showed that this is the result of the
kmem_cachereparenting in combination with the per-cpu batching of slab vmstats.At the offlining some vmstat value may leave in the percpu cache, not being propagated upwards by the cgroup hierarchy. It means that stats on ancestor levels are lower than actual. Later when slab pages are released, the precise number of pages is substracted on the parent level, making the value negative. We don't show negative values, 0 is printed instead.
Quoted 7 lines
Quoted 5 lines
To fix this issue, let's flush percpu slab memcg and lruvec stats on memcg offlining. This guarantees that numbers on all ancestor levels are accurate and match the actual number of outstanding slab pages.
Looks expensive. How frequently can these functions be called?
Once per memcg lifetime.
Quoted 52 lines
Quoted 39 lines
mm/memcontrol.c +32
-0@@ -3412,6 +3412,50 @@ static int memcg_online_kmem(struct mem_cgroup *memcg)return 0 ; } +static void memcg_flush_slab_node_stats (struct mem_cgroup *memcg,int node) +{ +struct mem_cgroup_per_node *pn = memcg->nodeinfo[node]; +struct mem_cgroup_per_node *pi; +unsigned long recl =0 , unrecl =0 ; +int cpu; + +for_each_possible_cpu (cpu) { + recl +=raw_cpu_read ( + pn->lruvec_stat_cpu->count[NR_SLAB_RECLAIMABLE ]); + unrecl +=raw_cpu_read ( + pn->lruvec_stat_cpu->count[NR_SLAB_UNRECLAIMABLE ]); + } + +for (pi = pn; pi; pi =parent_nodeinfo (pi, node)) { +atomic_long_add (recl, + &pi->lruvec_stat[NR_SLAB_RECLAIMABLE ]); +atomic_long_add (unrecl, + &pi->lruvec_stat[NR_SLAB_UNRECLAIMABLE ]); + } +} + +static void memcg_flush_slab_vmstats (struct mem_cgroup *memcg) +{ +struct mem_cgroup *mi; +unsigned long recl =0 , unrecl =0 ; +int node, cpu; + +for_each_possible_cpu (cpu) { + recl +=raw_cpu_read ( + memcg->vmstats_percpu->stat[NR_SLAB_RECLAIMABLE ]); + unrecl += raw_cpu_read(mm/memcontrol.c static int memcg_online_kmem(struct mem_cgroup *memcg) · line 3456
Quoted 10 lines
mm/memcontrol.c +10
-0+ memcg->vmstats_percpu->stat[NR_SLAB_UNRECLAIMABLE]); + } + +for (mi = memcg; mi; mi =parent_mem_cgroup (mi)) { +atomic_long_add (recl, &mi->vmstats[NR_SLAB_RECLAIMABLE ]); +atomic_long_add (unrecl, &mi->vmstats[NR_SLAB_UNRECLAIMABLE ]); + } + +for_each_node (node) +memcg_flush_slab_node_stats (memcg, node);This loops across all possible CPUs once for each possible node. Ouch.
Quoted 4 lines
Implementing hotplug handlers in here (which is surprisingly simple) brings this down to
num_online_nodes*num_online_cpuswhich is, I think, potentially vastly better.
Hm, maybe I'm biased because we don't play much with offlining, and don't have many NUMA nodes. What's the real world scenario? Disabling hyperthreading?
Idk, given that it happens once per memcg lifetime, and memcg destruction isn't cheap anyway, I'm not sure it worth it. But if you are, I'm happy to add hotplug handlers.
I also thought about merging per-memcg stats and per-memcg-per-node stats (reading part can aggregate over 2? 4? numa nodes each time). That will make everything overall cheaper. But it's a separate topic.
Thanks!
Andrew Morton
maintainerQuoted 22 lines · On Thu, 8 Aug 2019 21:47:11 +0000 Roman Gushchin <[email protected]> wrote:
Quoted 21 lines · Andrew Morton
Quoted 18 lines · On Thu, 8 Aug 2019 13:36:04 -0700 Roman Gushchin <[email protected]> wrote:
I've noticed that the "slab" value in memory.stat is sometimes 0, even if some children memory cgroups have a non-zero "slab" value. The following investigation showed that this is the result of the
kmem_cachereparenting in combination with the per-cpu batching of slab vmstats.At the offlining some vmstat value may leave in the percpu cache, not being propagated upwards by the cgroup hierarchy. It means that stats on ancestor levels are lower than actual. Later when slab pages are released, the precise number of pages is substracted on the parent level, making the value negative. We don't show negative values, 0 is printed instead.
To fix this issue, let's flush percpu slab memcg and lruvec stats on memcg offlining. This guarantees that numbers on all ancestor levels are accurate and match the actual number of outstanding slab pages.
Quoted 3 lines
Quoted 1 line
Looks expensive. How frequently can these functions be called?
Once per memcg lifetime.
iirc there are some workloads in which this can be rapid?
Quoted 5 lines
Quoted 5 lines
mm/memcontrol.c static int memcg_online_kmem(struct mem_cgroup *memcg) · line 3456
Quoted 2 lines
mm/memcontrol.c +2
-0+for_each_node (node) +memcg_flush_slab_node_stats (memcg, node);This loops across all possible CPUs once for each possible node. Ouch.
Quoted 8 lines
Quoted 4 lines
Implementing hotplug handlers in here (which is surprisingly simple) brings this down to
num_online_nodes*num_online_cpuswhich is, I think, potentially vastly better.Hm, maybe I'm biased because we don't play much with offlining, and don't have many NUMA nodes. What's the real world scenario? Disabling hyperthreading?
I assume it's machines which could take a large number of CPUs but in fact have few. I've asked this in response to many patches down the ages and have never really got a clear answer.
A concern is that if such machines do exist, it will take a long time for the regression reports to get to us. Especially if such machines are rare.
Quoted 3 lines
Idk, given that it happens once per memcg lifetime, and memcg destruction isn't cheap anyway, I'm not sure it worth it. But if you are, I'm happy to add hotplug handlers.
I think it's worth taking a look. As I mentioned, it can turn out to be stupidly simple.
Quoted 3 lines
I also thought about merging per-memcg stats and per-memcg-per-node stats (reading part can aggregate over 2? 4? numa nodes each time). That will make everything overall cheaper. But it's a separate topic.