Skip to contentSkip to conversation

SDK: getting error "xmlcatalog: not found" installing SDK

DISCUSSION [email protected] 1 participant 2 messages Jul 30, 2019 – Aug 9, 2019

lore
Share & tools
lore
#0 lore raw

Hello,

after updating to warrior 2.7.1 from thud and trying to install the Extensible SDK again I'm getting the following error:

```
ERROR: build-sysroots-1.0-r0 do_build_native_sysroot: Error executing a python function in exec_python_func() autogenerated:

The stack trace of python calls that resulted in this exception/failure was:
File: 'exec_python_func() autogenerated', lineno: 2, function: <module>
     0001:
 *** 0002:do_build_native_sysroot(d)
     0003:
File: '/workdir/sdk/rpi/layers/poky/meta/recipes-core/meta/build-sysroots.bb', lineno: 23, function: do_build_native_sysroot
     0019:
     0020:python do_build_native_sysroot () {
     0021:    targetsysroot = d.getVar("STANDALONE_SYSROOT")
     0022:    nativesysroot = d.getVar("STANDALONE_SYSROOT_NATIVE")
 *** 0023:    staging_populate_sysroot_dir(targetsysroot, nativesysroot, True, d)
     0024:}
     0025:do_build_native_sysroot[cleandirs] = "${STANDALONE_SYSROOT_NATIVE}"
     0026:do_build_native_sysroot[nostamp] = "1"
     0027:addtask do_build_native_sysroot before do_build
File: '/workdir/sdk/rpi/layers/poky/meta/classes/staging.bbclass', lineno: 235, function: staging_populate_sysroot_dir
     0231:                        continue
     0232:
     0233:    staging_processfixme(fixme, targetdir, targetsysroot, nativesysroot, d)
     0234:    for p in postinsts:
 *** 0235:        subprocess.check_output(p, shell=True, stderr=subprocess.STDOUT)
     0236:
     0237:#
     0238:# Manifests here are complicated. The main sysroot area has the unpacked sstate
     0239:# which us unrelocated and tracked by the main sstate manifests. Each recipe
File: '/workdir/sdk/rpi/buildtools/sysroots/x86_64-pokysdk-linux/usr/lib/python3.7/subprocess.py', lineno: 395, function: check_output
     0391:        # empty string. That is maintained here for backwards compatibility.
     0392:        kwargs['input'] = '' if kwargs.get('universal_newlines', False) else b''
     0393:
     0394:    return run(*popenargs, stdout=PIPE, timeout=timeout, check=True,
 *** 0395:               **kwargs).stdout
     0396:
     0397:
     0398:class CompletedProcess(object):
     0399:    """A process that has finished running.
File: '/workdir/sdk/rpi/buildtools/sysroots/x86_64-pokysdk-linux/usr/lib/python3.7/subprocess.py', lineno: 487, function: run
     0483:            raise
     0484:        retcode = process.poll()
     0485:        if check and retcode:
     0486:            raise CalledProcessError(retcode, process.args,
 *** 0487:                                     output=stdout, stderr=stderr)
     0488:    return CompletedProcess(process.args, retcode, stdout, stderr)
     0489:
     0490:
     0491:def list2cmdline(seq):
Exception: subprocess.CalledProcessError: Command '/workdir/sdk/rpi/tmp/sysroots/x86_64/usr/bin/postinst-docbook-xsl-stylesheets-native-xmlcatalog' returned non-zero exit status 127.

Subprocess output:
/workdir/sdk/rpi/tmp/sysroots/x86_64/usr/bin/postinst-docbook-xsl-stylesheets-native-xmlcatalog: 5: /workdir/sdk/rpi/tmp/sysroots/x86_64/usr/bin/postinst-docbook-xsl-stylesheets-native-xmlcatalog: xmlcatalog: not found
/workdir/sdk/rpi/tmp/sysroots/x86_64/usr/bin/postinst-docbook-xsl-stylesheets-native-xmlcatalog: 8: /workdir/sdk/rpi/tmp/sysroots/x86_64/usr/bin/postinst-docbook-xsl-stylesheets-native-xmlcatalog: xmlcatalog: not found
```

I believe the problem is that in the postinst-docbook-xsl-stylesheets-native-xmlcatalog, xmlcatalog is not an absolute path and thus not found.
This can be traced to the new layers/poky/meta/classes/xmlcatalog.bbclass. I tried to change xmlcatalog to ${SYSROOT_DESTDIR}${bindir}/xmlcatalog there, but even after cleaning the docbook-xsl-stylesheets recipe this change had no effect. I'm not sure if this class is cached somewhere else or something.

Can someone help me getting the SDK to work again, and maybe this is general thing with needs to be fixed?

Thank you.

Regards,

- Michael

#1 lore raw

Hello everyone,

I was able to workaround this issue:

In conf/bblayers.conf I put my custom layer ontop of the meta layer. Since classes seem to ignore the priority set by the layer config. Then I copied the classes/xmlcatalog.bbclass class to my layer and in the file I changed xmlcatalog to ${bindir}/xmlcatalog.

I'm still not sure if this an error specific to my setup or a general issue which should be fixed. Also I was hoping there is a better solution since changes to the original classes/xmlcatalog.bbclass will always be overridden.

Regards,

- Michael

Signature · 1 line
[email protected] wrote on 30.07.2019 16:32:
Quoted 121 lines

Hello,

after updating to warrior 2.7.1 from thud and trying to install the Extensible
SDK again I'm getting the following error:

```
ERROR: build-sysroots-1.0-r0 do_build_native_sysroot: Error executing a
python
function in exec_python_func() autogenerated:

The stack trace of python calls that resulted in this exception/failure
was:
File: 'exec_python_func() autogenerated', lineno: 2, function: <module>
     0001:
 *** 0002:do_build_native_sysroot(d)
     0003:
File:
'/workdir/sdk/rpi/layers/poky/meta/recipes-core/meta/build-sysroots.bb',
lineno: 23, function: do_build_native_sysroot
     0019:
     0020:python do_build_native_sysroot () {
     0021: targetsysroot = d.getVar("STANDALONE_SYSROOT")
     0022: nativesysroot = d.getVar("STANDALONE_SYSROOT_NATIVE")
 *** 0023: staging_populate_sysroot_dir(targetsysroot, nativesysroot,
 True, d)
     0024:}
     0025:do_build_native_sysroot[cleandirs] =
     "${STANDALONE_SYSROOT_NATIVE}"
     0026:do_build_native_sysroot[nostamp] = "1"
     0027:addtask do_build_native_sysroot before do_build
File: '/workdir/sdk/rpi/layers/poky/meta/classes/staging.bbclass', lineno:
235,
function: staging_populate_sysroot_dir
     0231: continue
     0232:
     0233: staging_processfixme(fixme, targetdir, targetsysroot,
     nativesysroot, d)
     0234: for p in postinsts:
 *** 0235: subprocess.check_output(p, shell=True,
 stderr=subprocess.STDOUT)
     0236:
     0237:#
     0238:# Manifests here are complicated. The main sysroot area has the
     unpacked sstate
     0239:# which us unrelocated and tracked by the main sstate manifests.
     Each
     recipe
File:
'/workdir/sdk/rpi/buildtools/sysroots/x86_64-pokysdk-linux/usr/lib/python3.7/subprocess.py',
lineno: 395, function: check_output
     0391: # empty string. That is maintained here for backwards
     compatibility.
     0392: kwargs['input'] = '' if kwargs.get('universal_newlines', False)
     else b''
     0393:
     0394: return run(*popenargs, stdout=PIPE, timeout=timeout,
     check=True,
 *** 0395: **kwargs).stdout
     0396:
     0397:
     0398:class CompletedProcess(object):
     0399: """A process that has finished running.
File:
'/workdir/sdk/rpi/buildtools/sysroots/x86_64-pokysdk-linux/usr/lib/python3.7/subprocess.py',
lineno: 487, function: run
     0483: raise
     0484: retcode = process.poll()
     0485: if check and retcode:
     0486: raise CalledProcessError(retcode, process.args,
 *** 0487: output=stdout, stderr=stderr)
     0488: return CompletedProcess(process.args, retcode, stdout, stderr)
     0489:
     0490:
     0491:def list2cmdline(seq):
Exception: subprocess.CalledProcessError: Command
'/workdir/sdk/rpi/tmp/sysroots/x86_64/usr/bin/postinst-docbook-xsl-stylesheets-native-xmlcatalog'
returned non-zero exit status 127.

Subprocess output:
/workdir/sdk/rpi/tmp/sysroots/x86_64/usr/bin/postinst-docbook-xsl-stylesheets-native-xmlcatalog:
5:
/workdir/sdk/rpi/tmp/sysroots/x86_64/usr/bin/postinst-docbook-xsl-stylesheets-native-xmlcatalog:
xmlcatalog: not found
/workdir/sdk/rpi/tmp/sysroots/x86_64/usr/bin/postinst-docbook-xsl-stylesheets-native-xmlcatalog:
8:
/workdir/sdk/rpi/tmp/sysroots/x86_64/usr/bin/postinst-docbook-xsl-stylesheets-native-xmlcatalog:
xmlcatalog: not found
```

I believe the problem is that in the postinst-docbook-xsl-stylesheets-native-xmlcatalog, xmlcatalog is not an
absolute path and thus not found.
This can be traced to the new layers/poky/meta/classes/xmlcatalog.bbclass. I
tried to change xmlcatalog to ${SYSROOT_DESTDIR}${bindir}/xmlcatalog there,
but even after cleaning the docbook-xsl-stylesheets recipe this change had no
effect. I'm not sure if this class is cached somewhere else or something.

Can someone help me getting the SDK to work again, and maybe this is general
thing with needs to be fixed?

Thank you.

Regards,

- Michael

Signature · 5 lines
-- 
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto