deal with BDRV_BLOCK_RAW
cover deal with BDRV_BLOCK_RAW
Hi all!
I'm not sure, is it a bug or a feature, but using qcow2 under raw is broken. It should be either fixed like I propose (by Max's suggestion) or somehow forbidden (just forbid backing-file supporting node to be file child of raw-format node).
Vladimir Sementsov-Ogievskiy (2):
block/raw-format: switch to BDRV_BLOCK_DATA with BDRV_BLOCK_RECURSE
iotests: test mirroring qcow2 under raw format
block/raw-format.c | 2 +- tests/qemu-iotests/263 | 46 ++++++++++++++++++++++++++++++++++++++ tests/qemu-iotests/263.out | 12 ++++++++++ tests/qemu-iotests/group | 1 + 4 files changed, 60 insertions(+), 1 deletion(-) create mode 100755 tests/qemu-iotests/263 create mode 100644 tests/qemu-iotests/263.out
Signature · 1 line
2.18.0
PATCH 1/2 block/raw-format: switch to BDRV_BLOCK_DATA with BDRV_BLOCK_RECURSE
BDRV_BLOCK_RAW makes generic bdrv_co_block_status to fallthrough to returned file. But is it correct behavior at all? If returned file itself has a backing file, we may report as totally unallocated and area which actually has data in bottom backing file.
So, mirroring of qcow2 under raw-format is broken. Which is illustrated by following commit with a test. Let's make raw-format behave more correctly returning BDRV_BLOCK_DATA.
--- block/raw-format.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
block/raw-format.c +1 -1
@@ -275,7 +275,7 @@ static int coroutine_fn raw_co_block_status(BlockDriverState *bs, *pnum = bytes; *file = bs->file->bs; *map = offset + s->offset; -return BDRV_BLOCK_RAW |BDRV_BLOCK_OFFSET_VALID ; +return BDRV_BLOCK_DATA |BDRV_BLOCK_OFFSET_VALID |BDRV_BLOCK_RECURSE ; } static int coroutine_fn raw_co_pwrite_zeroes(BlockDriverState *bs,
Signature · 1 line
2.18.0
Re: [Qemu-devel] [PATCH 1/2] block/raw-format: switch to BDRV_BLOCK_DATA with BDRV_BLOCK_RECURSE
Am 12.08.2019 um 20:11 hat Vladimir Sementsov-Ogievskiy geschrieben:
Quoted 11 lines
BDRV_BLOCK_RAWmakes genericbdrv_co_block_statusto fallthrough to returned file. But is it correct behavior at all? If returned file itself has a backing file, we may report as totally unallocated and area which actually has data in bottom backing file.So, mirroring of qcow2 under raw-format is broken. Which is illustrated by following commit with a test. Let's make raw-format behave more correctly returning
BDRV_BLOCK_DATA.Suggested-by Max Reitz <[email protected]>Signed-off-by Vladimir Sementsov-Ogievskiy <[email protected]>
After some reading, I think I came to the conclusion that RAW is the correct thing to do. There is indeed a problem, but this patch is trying to fix it in the wrong place.
In the case where the backing file contains some data, and we have a 'raw' node above the qcow2 overlay node, the content of the respective block is not defined by the queried backing file layer, so it is completely correct that bdrv_is_allocated() returns false, like it would if you queried the qcow2 layer directly. If it returned true, we would copy everything, which isn't right either (the test cases should may add the qemu-img map output of the target so this becomes visible).
The problem is that we try to recurse along the backing chain, but we fail to make the step from the raw node to the backing file.
Note that just extending Max's "deal with filters" is not enough to fix this because raw doesn't actually meet all of the criteria for being a filter in this sense (at least because the 'offset' option can change offsets between raw and its child).
I think this is essentially a result of special-casing backing files everywhere instead of treating them like children like any other. bdrv_co_block_status_above() probably shouldn't recurse along the backing chain, but along the returned *file pointers, and consider the returned offset in *map.
Kevin
Re: [Qemu-devel] [PATCH 1/2] block/raw-format: switch to BDRV_BLOCK_DATA with BDRV_BLOCK_RECURSE
Quoted 25 lines · Kevin Wolf
Am 12.08.2019 um 20:11 hat Vladimir Sementsov-Ogievskiy geschrieben:
Quoted 11 lines
BDRV_BLOCK_RAWmakes genericbdrv_co_block_statusto fallthrough to returned file. But is it correct behavior at all? If returned file itself has a backing file, we may report as totally unallocated and area which actually has data in bottom backing file.So, mirroring of qcow2 under raw-format is broken. Which is illustrated by following commit with a test. Let's make raw-format behave more correctly returning
BDRV_BLOCK_DATA.Suggested-by Max Reitz <[email protected]>Signed-off-by Vladimir Sementsov-Ogievskiy <[email protected]>After some reading, I think I came to the conclusion that RAW is the correct thing to do. There is indeed a problem, but this patch is trying to fix it in the wrong place.
In the case where the backing file contains some data, and we have a 'raw' node above the qcow2 overlay node, the content of the respective block is not defined by the queried backing file layer, so it is completely correct that
bdrv_is_allocated()returns false, like it would if you queried the qcow2 layer directly. If it returned true, we would copy everything, which isn't right either (the test cases should may add the qemu-img map output of the target so this becomes visible).
Quoted 2 lines
The problem is that we try to recurse along the backing chain, but we fail to make the step from the raw node to the backing file.
I'd say, the problem is that we ignore backing chain of non-backing child
Quoted 8 lines
Note that just extending Max's "deal with filters" is not enough to fix this because raw doesn't actually meet all of the criteria for being a filter in this sense (at least because the 'offset' option can change offsets between raw and its child).
I think this is essentially a result of special-casing backing files everywhere instead of treating them like children like any other.
But we need to special-case them, as we have interfaces operating on backing chain,
Quoted 4 lines
bdrv_co_block_status_above()probably shouldn't recurse along the backing chain, but along the returned *file pointers, and consider the returned offset in *map.
So, you mean that in case of unallocated, format layer should return it's backing file as file? Then, maybe bdrv_co_block_status should not recurse at all?
Signature · 2 lines
Best regards, Vladimir
Re: [Qemu-devel] [PATCH 1/2] block/raw-format: switch to BDRV_BLOCK_DATA with BDRV_BLOCK_RECURSE
Am 13.08.2019 um 13:28 hat Vladimir Sementsov-Ogievskiy geschrieben:
Quoted 26 lines
Quoted 25 lines · Kevin Wolf
Am 12.08.2019 um 20:11 hat Vladimir Sementsov-Ogievskiy geschrieben:
Quoted 11 lines
BDRV_BLOCK_RAWmakes genericbdrv_co_block_statusto fallthrough to returned file. But is it correct behavior at all? If returned file itself has a backing file, we may report as totally unallocated and area which actually has data in bottom backing file.So, mirroring of qcow2 under raw-format is broken. Which is illustrated by following commit with a test. Let's make raw-format behave more correctly returning
BDRV_BLOCK_DATA.Suggested-by Max Reitz <[email protected]>Signed-off-by Vladimir Sementsov-Ogievskiy <[email protected]>After some reading, I think I came to the conclusion that RAW is the correct thing to do. There is indeed a problem, but this patch is trying to fix it in the wrong place.
In the case where the backing file contains some data, and we have a 'raw' node above the qcow2 overlay node, the content of the respective block is not defined by the queried backing file layer, so it is completely correct that
bdrv_is_allocated()returns false, like it would if you queried the qcow2 layer directly. If it returned true, we would copy everything, which isn't right either (the test cases should may add the qemu-img map output of the target so this becomes visible).
Quoted 5 lines
Quoted 2 lines
The problem is that we try to recurse along the backing chain, but we fail to make the step from the raw node to the backing file.
I'd say, the problem is that we ignore backing chain of non-backing child
Yes, exactly. And I know even less about what happens if a child is neither bs->file nor bs->backing. Imagine a qcow2 image with an external data file that is a qcow2 image with a backing file itself. :-)
Actually, just having two qcow2 layers nested with bs->file probably already fails.
Quoted 10 lines
Quoted 7 lines
Note that just extending Max's "deal with filters" is not enough to fix this because raw doesn't actually meet all of the criteria for being a filter in this sense (at least because the 'offset' option can change offsets between raw and its child).
I think this is essentially a result of special-casing backing files everywhere instead of treating them like children like any other.
But we need to special-case them, as we have interfaces operating on backing chain,
I'm not sure yet if this means that these interfaces are wrong, but it might. But in any case, I think we depend on special-casing in more places than we should.
Quoted 6 lines
Quoted 3 lines
bdrv_co_block_status_above()probably shouldn't recurse along the backing chain, but along the returned *file pointers, and consider the returned offset in *map.So, you mean that in case of unallocated, format layer should return it's backing file as file?
Yes, because that's where it's reading the data from.
Hm... Now I wonder what this means for DATA... In theory it would have to be set for backing files, but that would make it completely useless. We can distinguish the cases by looking at *file, but how does the generic block layer know which child should be counted as "allocated" and which shouldn't?
Quoted 1 line
Then, maybe
bdrv_co_block_statusshould not recurse at all?
Maybe. I think I need to draw a bit on the whiteboard before I can really say anything. It would probably be a pretty fundamental change to the model how block_status works.
Kevin
Re: [Qemu-devel] [Qemu-block] [PATCH 1/2] block/raw-format: switch to BDRV_BLOCK_DATA with BDRV_BLOCK_RECURSE
Am 13.08.2019 um 14:01 hat Kevin Wolf geschrieben:
Quoted 62 lines
Am 13.08.2019 um 13:28 hat Vladimir Sementsov-Ogievskiy geschrieben:
Quoted 26 lines
Quoted 25 lines · Kevin Wolf
Am 12.08.2019 um 20:11 hat Vladimir Sementsov-Ogievskiy geschrieben:
Quoted 11 lines
BDRV_BLOCK_RAWmakes genericbdrv_co_block_statusto fallthrough to returned file. But is it correct behavior at all? If returned file itself has a backing file, we may report as totally unallocated and area which actually has data in bottom backing file.So, mirroring of qcow2 under raw-format is broken. Which is illustrated by following commit with a test. Let's make raw-format behave more correctly returning
BDRV_BLOCK_DATA.Suggested-by Max Reitz <[email protected]>Signed-off-by Vladimir Sementsov-Ogievskiy <[email protected]>After some reading, I think I came to the conclusion that RAW is the correct thing to do. There is indeed a problem, but this patch is trying to fix it in the wrong place.
In the case where the backing file contains some data, and we have a 'raw' node above the qcow2 overlay node, the content of the respective block is not defined by the queried backing file layer, so it is completely correct that
bdrv_is_allocated()returns false, like it would if you queried the qcow2 layer directly. If it returned true, we would copy everything, which isn't right either (the test cases should may add the qemu-img map output of the target so this becomes visible).Quoted 5 lines
Quoted 2 lines
The problem is that we try to recurse along the backing chain, but we fail to make the step from the raw node to the backing file.
I'd say, the problem is that we ignore backing chain of non-backing child
Yes, exactly. And I know even less about what happens if a child is neither
bs->filenorbs->backing. Imagine a qcow2 image with an external data file that is a qcow2 image with a backing file itself. :-)Actually, just having two qcow2 layers nested with
bs->fileprobably already fails.Quoted 10 lines
Quoted 7 lines
Note that just extending Max's "deal with filters" is not enough to fix this because raw doesn't actually meet all of the criteria for being a filter in this sense (at least because the 'offset' option can change offsets between raw and its child).
I think this is essentially a result of special-casing backing files everywhere instead of treating them like children like any other.
But we need to special-case them, as we have interfaces operating on backing chain,
I'm not sure yet if this means that these interfaces are wrong, but it might. But in any case, I think we depend on special-casing in more places than we should.
Quoted 6 lines
Quoted 3 lines
bdrv_co_block_status_above()probably shouldn't recurse along the backing chain, but along the returned *file pointers, and consider the returned offset in *map.So, you mean that in case of unallocated, format layer should return it's backing file as file?
Quoted 7 lines
Yes, because that's where it's reading the data from.
Hm... Now I wonder what this means for DATA... In theory it would have to be set for backing files, but that would make it completely useless. We can distinguish the cases by looking at *file, but how does the generic block layer know which child should be counted as "allocated" and which shouldn't?
Possible answer to my own question:
bdrv_is_allocated(bs) isn't even asking a complete question. What we really need to ask is whether a specific child is where data comes from.
What the current callers of bdrv_is_allocated() are interested in is whether the data comes from bs->backing or from somewhere else. That is, if removing bs from the graph (so that all parents of bs would point to bs->backing instead) would still result in the same data in the given block.
Kevin
Re: [Qemu-devel] [Qemu-block] [PATCH 1/2] block/raw-format: switch to BDRV_BLOCK_DATA with BDRV_BLOCK_RECURSE
Quoted 73 lines · Kevin Wolf
Am 13.08.2019 um 14:01 hat Kevin Wolf geschrieben:
Quoted 62 lines
Am 13.08.2019 um 13:28 hat Vladimir Sementsov-Ogievskiy geschrieben:
Quoted 26 lines
Quoted 25 lines · Kevin Wolf
Am 12.08.2019 um 20:11 hat Vladimir Sementsov-Ogievskiy geschrieben:
Quoted 11 lines
BDRV_BLOCK_RAWmakes genericbdrv_co_block_statusto fallthrough to returned file. But is it correct behavior at all? If returned file itself has a backing file, we may report as totally unallocated and area which actually has data in bottom backing file.So, mirroring of qcow2 under raw-format is broken. Which is illustrated by following commit with a test. Let's make raw-format behave more correctly returning
BDRV_BLOCK_DATA.Suggested-by Max Reitz <[email protected]>Signed-off-by Vladimir Sementsov-Ogievskiy <[email protected]>After some reading, I think I came to the conclusion that RAW is the correct thing to do. There is indeed a problem, but this patch is trying to fix it in the wrong place.
In the case where the backing file contains some data, and we have a 'raw' node above the qcow2 overlay node, the content of the respective block is not defined by the queried backing file layer, so it is completely correct that
bdrv_is_allocated()returns false, like it would if you queried the qcow2 layer directly. If it returned true, we would copy everything, which isn't right either (the test cases should may add the qemu-img map output of the target so this becomes visible).Quoted 5 lines
Quoted 2 lines
The problem is that we try to recurse along the backing chain, but we fail to make the step from the raw node to the backing file.
I'd say, the problem is that we ignore backing chain of non-backing child
Yes, exactly. And I know even less about what happens if a child is neither
bs->filenorbs->backing. Imagine a qcow2 image with an external data file that is a qcow2 image with a backing file itself. :-)Actually, just having two qcow2 layers nested with
bs->fileprobably already fails.Quoted 10 lines
Quoted 7 lines
Note that just extending Max's "deal with filters" is not enough to fix this because raw doesn't actually meet all of the criteria for being a filter in this sense (at least because the 'offset' option can change offsets between raw and its child).
I think this is essentially a result of special-casing backing files everywhere instead of treating them like children like any other.
But we need to special-case them, as we have interfaces operating on backing chain,
I'm not sure yet if this means that these interfaces are wrong, but it might. But in any case, I think we depend on special-casing in more places than we should.
Quoted 6 lines
Quoted 3 lines
bdrv_co_block_status_above()probably shouldn't recurse along the backing chain, but along the returned *file pointers, and consider the returned offset in *map.So, you mean that in case of unallocated, format layer should return it's backing file as file?
Quoted 7 lines
Yes, because that's where it's reading the data from.
Hm... Now I wonder what this means for DATA... In theory it would have to be set for backing files, but that would make it completely useless. We can distinguish the cases by looking at *file, but how does the generic block layer know which child should be counted as "allocated" and which shouldn't?
Possible answer to my own question:
Quoted 8 lines
bdrv_is_allocated(bs)isn't even asking a complete question. What we really need to ask is whether a specific child is where data comes from.What the current callers of
bdrv_is_allocated()are interested in is whether the data comes frombs->backingor from somewhere else. That is, if removing bs from the graph (so that all parents of bs would point tobs->backinginstead) would still result in the same data in the given block.
Maybe callers of bdrv_is_allocated() should just ensure that the node they pass actually has a backing file.
(If it doesn’t, they should skip all filters until it does.)
Max
Re: [Qemu-devel] [PATCH 1/2] block/raw-format: switch to BDRV_BLOCK_DATA with BDRV_BLOCK_RECURSE
In reply to Kevin WolfQuoted 17 lines · Kevin Wolf
Am 12.08.2019 um 20:11 hat Vladimir Sementsov-Ogievskiy geschrieben:
Quoted 11 lines
BDRV_BLOCK_RAWmakes genericbdrv_co_block_statusto fallthrough to returned file. But is it correct behavior at all? If returned file itself has a backing file, we may report as totally unallocated and area which actually has data in bottom backing file.So, mirroring of qcow2 under raw-format is broken. Which is illustrated by following commit with a test. Let's make raw-format behave more correctly returning
BDRV_BLOCK_DATA.Suggested-by Max Reitz <[email protected]>Signed-off-by Vladimir Sementsov-Ogievskiy <[email protected]>After some reading, I think I came to the conclusion that RAW is the correct thing to do. There is indeed a problem, but this patch is trying to fix it in the wrong place.
Quoted 5 lines
In the case where the backing file contains some data, and we have a 'raw' node above the qcow2 overlay node, the content of the respective block is not defined by the queried backing file layer, so it is completely correct that
bdrv_is_allocated()returns false,like it would if you queried the qcow2 layer directly.
I disagree. The queried backing file layer is the raw node. As I said, in my opinion raw nodes are not filter nodes, neither in behavior (they have an offset option), nor in how they are generally used (as a format).
The raw format does not support backing files. Therefore, everything on a raw node is allocated.
(That is, like, my opinion.)
Quoted 3 lines
If it returned true, we would
copy everything, which isn't right either (the test cases should may add the qemu-img map output of the target so this becomes visible).
It is right.
Max
Re: [Qemu-devel] [PATCH 1/2] block/raw-format: switch to BDRV_BLOCK_DATA with BDRV_BLOCK_RECURSE
Quoted 24 lines · Max Reitz
Quoted 17 lines · Kevin Wolf
Am 12.08.2019 um 20:11 hat Vladimir Sementsov-Ogievskiy geschrieben:
Quoted 11 lines
BDRV_BLOCK_RAWmakes genericbdrv_co_block_statusto fallthrough to returned file. But is it correct behavior at all? If returned file itself has a backing file, we may report as totally unallocated and area which actually has data in bottom backing file.So, mirroring of qcow2 under raw-format is broken. Which is illustrated by following commit with a test. Let's make raw-format behave more correctly returning
BDRV_BLOCK_DATA.Suggested-by Max Reitz <[email protected]>Signed-off-by Vladimir Sementsov-Ogievskiy <[email protected]>After some reading, I think I came to the conclusion that RAW is the correct thing to do. There is indeed a problem, but this patch is trying to fix it in the wrong place.
Quoted 5 lines
In the case where the backing file contains some data, and we have a 'raw' node above the qcow2 overlay node, the content of the respective block is not defined by the queried backing file layer, so it is completely correct that
bdrv_is_allocated()returns false,like it would if you queried the qcow2 layer directly.
Quoted 7 lines
I disagree. The queried backing file layer is the raw node. As I said, in my opinion raw nodes are not filter nodes, neither in behavior (they have an offset option), nor in how they are generally used (as a format).
The raw format does not support backing files. Therefore, everything on a raw node is allocated.
Could you tell me at least, what means "allocated" ?
It's a term that describing a region somehow.. But how? Allocated where? In raw node, in its child or both? Am I right that if region allocated in one of non-cow children it is assumed to be allocated in parent too? Or what?
And it's unrelated to real disk allocation which (IMHO) directly shows that this a bad term.
Signature · 2 lines
Best regards, Vladimir
Re: [Qemu-devel] [PATCH 1/2] block/raw-format: switch to BDRV_BLOCK_DATA with BDRV_BLOCK_RECURSE
Quoted 33 lines · Vladimir Sementsov-Ogievskiy
Quoted 24 lines · Max Reitz
Quoted 17 lines · Kevin Wolf
Am 12.08.2019 um 20:11 hat Vladimir Sementsov-Ogievskiy geschrieben:
Quoted 11 lines
BDRV_BLOCK_RAWmakes genericbdrv_co_block_statusto fallthrough to returned file. But is it correct behavior at all? If returned file itself has a backing file, we may report as totally unallocated and area which actually has data in bottom backing file.So, mirroring of qcow2 under raw-format is broken. Which is illustrated by following commit with a test. Let's make raw-format behave more correctly returning
BDRV_BLOCK_DATA.Suggested-by Max Reitz <[email protected]>Signed-off-by Vladimir Sementsov-Ogievskiy <[email protected]>After some reading, I think I came to the conclusion that RAW is the correct thing to do. There is indeed a problem, but this patch is trying to fix it in the wrong place.
Quoted 5 lines
In the case where the backing file contains some data, and we have a 'raw' node above the qcow2 overlay node, the content of the respective block is not defined by the queried backing file layer, so it is completely correct that
bdrv_is_allocated()returns false,like it would if you queried the qcow2 layer directly.Quoted 7 lines
I disagree. The queried backing file layer is the raw node. As I said, in my opinion raw nodes are not filter nodes, neither in behavior (they have an offset option), nor in how they are generally used (as a format).
The raw format does not support backing files. Therefore, everything on a raw node is allocated.
Quoted 8 lines
Could you tell me at least, what means "allocated" ?
It's a term that describing a region somehow.. But how? Allocated where? In raw node, in its child or both? Am I right that if region allocated in one of non-cow children it is assumed to be allocated in parent too? Or what?
And it's unrelated to real disk allocation which (IMHO) directly shows that this a bad term.
It’s a term for COW backing chains. If something is allocated on a given node in a COW backing chain, it means it is either present in exactly that node or in one of its storage children (in case the node is a format node). If it is not allocated, it is not, and read accesses will be forwarded to the COW backing child.
Max
Re: [Qemu-devel] [PATCH 1/2] block/raw-format: switch to BDRV_BLOCK_DATA with BDRV_BLOCK_RECURSE
Quoted 40 lines · Max Reitz
Quoted 39 lines · Vladimir Sementsov-Ogievskiy
Quoted 24 lines · Max Reitz
Quoted 17 lines · Kevin Wolf
Am 12.08.2019 um 20:11 hat Vladimir Sementsov-Ogievskiy geschrieben:
Quoted 11 lines
BDRV_BLOCK_RAWmakes genericbdrv_co_block_statusto fallthrough to returned file. But is it correct behavior at all? If returned file itself has a backing file, we may report as totally unallocated and area which actually has data in bottom backing file.So, mirroring of qcow2 under raw-format is broken. Which is illustrated by following commit with a test. Let's make raw-format behave more correctly returning
BDRV_BLOCK_DATA.Suggested-by Max Reitz <[email protected]>Signed-off-by Vladimir Sementsov-Ogievskiy <[email protected]>After some reading, I think I came to the conclusion that RAW is the correct thing to do. There is indeed a problem, but this patch is trying to fix it in the wrong place.
Quoted 5 lines
In the case where the backing file contains some data, and we have a 'raw' node above the qcow2 overlay node, the content of the respective block is not defined by the queried backing file layer, so it is completely correct that
bdrv_is_allocated()returns false,like it would if you queried the qcow2 layer directly.Quoted 7 lines
I disagree. The queried backing file layer is the raw node. As I said, in my opinion raw nodes are not filter nodes, neither in behavior (they have an offset option), nor in how they are generally used (as a format).
The raw format does not support backing files. Therefore, everything on a raw node is allocated.
Could you tell me at least, what means "allocated" ?
It's a term that describing a region somehow.. But how? Allocated where? In raw node, in its child or both? Am I right that if region allocated in one of non-cow children it is assumed to be allocated in parent too? Or what?
Quoted 9 lines
Quoted 2 lines
And it's unrelated to real disk allocation which (IMHO) directly shows that this a bad term.
It’s a term for COW backing chains. If something is allocated on a given node in a COW backing chain, it means it is either present in exactly that node or in one of its storage children (in case the node is a format node). If it is not allocated, it is not, and read accesses will be forwarded to the COW backing child.
And this definition leads exactly to bug in these series:
[raw]
|
|file
V file
[qcow2]--------->[file]
|
|backing
V
[base]
Assume something is actually allocated in [base] but not in [qcow2]. So, [qcow2] node reports it as unallocated. So nobdy of [raw]'s storage children contains this as allocated, so it's unallocated in [raw].
And if you say that logic is different for raw as it don't have COW child, we may put qcow2 instead of raw here with same problem [yes, qcow2 on qcow2 is a bit strange, but we try to make something generic]
Signature · 2 lines
Best regards, Vladimir
Re: [Qemu-devel] [PATCH 1/2] block/raw-format: switch to BDRV_BLOCK_DATA with BDRV_BLOCK_RECURSE
Quoted 65 lines · Vladimir Sementsov-Ogievskiy
Quoted 40 lines · Max Reitz
Quoted 39 lines · Vladimir Sementsov-Ogievskiy
Quoted 24 lines · Max Reitz
Quoted 17 lines · Kevin Wolf
Am 12.08.2019 um 20:11 hat Vladimir Sementsov-Ogievskiy geschrieben:
Quoted 11 lines
BDRV_BLOCK_RAWmakes genericbdrv_co_block_statusto fallthrough to returned file. But is it correct behavior at all? If returned file itself has a backing file, we may report as totally unallocated and area which actually has data in bottom backing file.So, mirroring of qcow2 under raw-format is broken. Which is illustrated by following commit with a test. Let's make raw-format behave more correctly returning
BDRV_BLOCK_DATA.Suggested-by Max Reitz <[email protected]>Signed-off-by Vladimir Sementsov-Ogievskiy <[email protected]>After some reading, I think I came to the conclusion that RAW is the correct thing to do. There is indeed a problem, but this patch is trying to fix it in the wrong place.
Quoted 5 lines
In the case where the backing file contains some data, and we have a 'raw' node above the qcow2 overlay node, the content of the respective block is not defined by the queried backing file layer, so it is completely correct that
bdrv_is_allocated()returns false,like it would if you queried the qcow2 layer directly.Quoted 7 lines
I disagree. The queried backing file layer is the raw node. As I said, in my opinion raw nodes are not filter nodes, neither in behavior (they have an offset option), nor in how they are generally used (as a format).
The raw format does not support backing files. Therefore, everything on a raw node is allocated.
Could you tell me at least, what means "allocated" ?
It's a term that describing a region somehow.. But how? Allocated where? In raw node, in its child or both? Am I right that if region allocated in one of non-cow children it is assumed to be allocated in parent too? Or what?
Quoted 9 lines
Quoted 2 lines
And it's unrelated to real disk allocation which (IMHO) directly shows that this a bad term.
It’s a term for COW backing chains. If something is allocated on a given node in a COW backing chain, it means it is either present in exactly that node or in one of its storage children (in case the node is a format node). If it is not allocated, it is not, and read accesses will be forwarded to the COW backing child.
And this definition leads exactly to bug in these series:
[raw]
|
|file
V file
[qcow2]--------->[file]
|
|backing
V
[base]
Quoted 3 lines
Assume something is actually allocated in [base] but not in [qcow2]. So, [qcow2] node reports it as unallocated. So nobdy of [raw]'s storage children contains this as allocated, so it's unallocated in [raw].
Well, I would say it is in raw’s storage child, because the definition of backing chain allocation only recurses down the COW link.
If it is *anywhere* in the storage subtree, it is to be considered allocated on this level. If it is in the backing COW subtree, it is not.
And if it is in neither, it doesn’t matter whether we say it’s allocated or not:
For example (1), for sparse files, the raw driver may not have the data in the storage subtree. But it sure as hell won’t have it in its backing COW subtree, because it doesn’t have one. So for simplicity’s sake, it may just return everything as allocated.
For example (2), for sparse qcow2 files, the qcow2 driver may report some ranges as unallocated even when it doesn’t have a backing file. We don’t need to change it to report such cases as allocated.
Max
Re: [Qemu-devel] [PATCH 1/2] block/raw-format: switch to BDRV_BLOCK_DATA with BDRV_BLOCK_RECURSE
In reply to Max ReitzAm 13.08.2019 um 16:43 hat Max Reitz geschrieben:
Quoted 31 lines · Kevin Wolf
Quoted 17 lines
Am 12.08.2019 um 20:11 hat Vladimir Sementsov-Ogievskiy geschrieben:
Quoted 11 lines
BDRV_BLOCK_RAWmakes genericbdrv_co_block_statusto fallthrough to returned file. But is it correct behavior at all? If returned file itself has a backing file, we may report as totally unallocated and area which actually has data in bottom backing file.So, mirroring of qcow2 under raw-format is broken. Which is illustrated by following commit with a test. Let's make raw-format behave more correctly returning
BDRV_BLOCK_DATA.Suggested-by Max Reitz <[email protected]>Signed-off-by Vladimir Sementsov-Ogievskiy <[email protected]>After some reading, I think I came to the conclusion that RAW is the correct thing to do. There is indeed a problem, but this patch is trying to fix it in the wrong place.
Quoted 5 lines
In the case where the backing file contains some data, and we have a 'raw' node above the qcow2 overlay node, the content of the respective block is not defined by the queried backing file layer, so it is completely correct that
bdrv_is_allocated()returns false,like it would if you queried the qcow2 layer directly.I disagree. The queried backing file layer is the raw node. As I said, in my opinion raw nodes are not filter nodes, neither in behavior (they have an offset option), nor in how they are generally used (as a format).
The raw format does not support backing files. Therefore, everything on a raw node is allocated.
Quoted 7 lines
(That is, like, my opinion.)
Quoted 3 lines
If it returned true, we would
copy everything, which isn't right either (the test cases should may add the qemu-img map output of the target so this becomes visible).It is right.
So we don't even agree what mirroring the raw node should even mean.
I can the see your point when you say that the raw node has no backing file, so everything should be copied. But I can also see the point that the raw node can really just be used as a filter that limits the data exposed from the qcow2 layer, and you want to keep the copy a COW overlay over the same backing file.
Both are valid use cases in principle and there is no single right or wrong.
We don't currently support the latter use case because we have only sync=full or sync=top, but if you could specify a base node instead, we could probably suport the case without all of the special-casing filter nodes and backing file childs.
You would call bdrv_co_block_status_above() with the right base node and it would just recurse whereever the data is stored, be it bs->backing, bs->file or even driver-specific children. This would allow you to find out whether some block in the top node came from the base node that we're going to keep. If yes, skip it; if no, copy it.
This way we wouldn't have to decide whether raw is a filter or not, because it wouldn't make a difference. The behaviour would only depend on the base node given by the user. If you specified the top-level qcow2 file as the base, you get your full copy; if you specified the backing qcow2, you get the partial copy where the target still uses the same backing file.
(Hm... It would only actually work if the offsets stay the same in the chain, which is true for backing file children, but not necessarily for other children. Anyway, even if we don't gain much functionality, I really want a more generic model that avoids different types of nodes and edges as much as possible.)
Kevin
Re: [Qemu-devel] [PATCH 1/2] block/raw-format: switch to BDRV_BLOCK_DATA with BDRV_BLOCK_RECURSE
Quoted 62 lines · Kevin Wolf
Am 13.08.2019 um 16:43 hat Max Reitz geschrieben:
Quoted 31 lines · Kevin Wolf
Quoted 17 lines
Am 12.08.2019 um 20:11 hat Vladimir Sementsov-Ogievskiy geschrieben:
Quoted 11 lines
BDRV_BLOCK_RAWmakes genericbdrv_co_block_statusto fallthrough to returned file. But is it correct behavior at all? If returned file itself has a backing file, we may report as totally unallocated and area which actually has data in bottom backing file.So, mirroring of qcow2 under raw-format is broken. Which is illustrated by following commit with a test. Let's make raw-format behave more correctly returning
BDRV_BLOCK_DATA.Suggested-by Max Reitz <[email protected]>Signed-off-by Vladimir Sementsov-Ogievskiy <[email protected]>After some reading, I think I came to the conclusion that RAW is the correct thing to do. There is indeed a problem, but this patch is trying to fix it in the wrong place.
Quoted 5 lines
In the case where the backing file contains some data, and we have a 'raw' node above the qcow2 overlay node, the content of the respective block is not defined by the queried backing file layer, so it is completely correct that
bdrv_is_allocated()returns false,like it would if you queried the qcow2 layer directly.I disagree. The queried backing file layer is the raw node. As I said, in my opinion raw nodes are not filter nodes, neither in behavior (they have an offset option), nor in how they are generally used (as a format).
The raw format does not support backing files. Therefore, everything on a raw node is allocated.
Quoted 7 lines
(That is, like, my opinion.)
Quoted 3 lines
If it returned true, we would
copy everything, which isn't right either (the test cases should may add the qemu-img map output of the target so this becomes visible).It is right.
So we don't even agree what mirroring the raw node should even mean.
I can the see your point when you say that the raw node has no backing file, so everything should be copied. But I can also see the point that the raw node can really just be used as a filter that limits the data exposed from the qcow2 layer, and you want to keep the copy a COW overlay over the same backing file.
Both are valid use cases in principle and there is no single right or wrong.
We don't currently support the latter use case because we have only sync=full or sync=top, but if you could specify a base node instead, we could probably suport the case without all of the special-casing filter nodes and backing file childs.
You would call
bdrv_co_block_status_above()with the right base node and it would just recurse whereever the data is stored, be itbs->backing,bs->fileor even driver-specific children. This would allow you to find out whether some block in the top node came from the base node that we're going to keep. If yes, skip it; if no, copy it.
Quoted 4 lines
This way we wouldn't have to decide whether raw is a filter or not, because it wouldn't make a difference. The behaviour would only depend on the base node given by the user. If you specified the top-level qcow2 file as the base, you get your full copy;
ahm, full-copy = base is NULL..
Quoted 7 lines
if you specified the backing
qcow2, you get the partial copy where the target still uses the same backing file.(Hm... It would only actually work if the offsets stay the same in the chain, which is true for backing file children, but not necessarily for other children.
Don't follow, what you mean by offsets stay the same and what is wrong with it?
Quoted 6 lines
Anyway, even if we don't gain much functionality, I
really want a more generic model that avoids different types of nodes and edges as much as possible.)Kevin
Signature · 2 lines
Best regards, Vladimir
Re: [Qemu-devel] [PATCH 1/2] block/raw-format: switch to BDRV_BLOCK_DATA with BDRV_BLOCK_RECURSE
Am 13.08.2019 um 17:54 hat Vladimir Sementsov-Ogievskiy geschrieben:
Quoted 63 lines
Quoted 62 lines · Kevin Wolf
Am 13.08.2019 um 16:43 hat Max Reitz geschrieben:
Quoted 31 lines · Kevin Wolf
Quoted 17 lines
Am 12.08.2019 um 20:11 hat Vladimir Sementsov-Ogievskiy geschrieben:
Quoted 11 lines
BDRV_BLOCK_RAWmakes genericbdrv_co_block_statusto fallthrough to returned file. But is it correct behavior at all? If returned file itself has a backing file, we may report as totally unallocated and area which actually has data in bottom backing file.So, mirroring of qcow2 under raw-format is broken. Which is illustrated by following commit with a test. Let's make raw-format behave more correctly returning
BDRV_BLOCK_DATA.Suggested-by Max Reitz <[email protected]>Signed-off-by Vladimir Sementsov-Ogievskiy <[email protected]>After some reading, I think I came to the conclusion that RAW is the correct thing to do. There is indeed a problem, but this patch is trying to fix it in the wrong place.
Quoted 5 lines
In the case where the backing file contains some data, and we have a 'raw' node above the qcow2 overlay node, the content of the respective block is not defined by the queried backing file layer, so it is completely correct that
bdrv_is_allocated()returns false,like it would if you queried the qcow2 layer directly.I disagree. The queried backing file layer is the raw node. As I said, in my opinion raw nodes are not filter nodes, neither in behavior (they have an offset option), nor in how they are generally used (as a format).
The raw format does not support backing files. Therefore, everything on a raw node is allocated.
Quoted 7 lines
(That is, like, my opinion.)
Quoted 3 lines
If it returned true, we would
copy everything, which isn't right either (the test cases should may add the qemu-img map output of the target so this becomes visible).It is right.
So we don't even agree what mirroring the raw node should even mean.
I can the see your point when you say that the raw node has no backing file, so everything should be copied. But I can also see the point that the raw node can really just be used as a filter that limits the data exposed from the qcow2 layer, and you want to keep the copy a COW overlay over the same backing file.
Both are valid use cases in principle and there is no single right or wrong.
We don't currently support the latter use case because we have only sync=full or sync=top, but if you could specify a base node instead, we could probably suport the case without all of the special-casing filter nodes and backing file childs.
You would call
bdrv_co_block_status_above()with the right base node and it would just recurse whereever the data is stored, be itbs->backing,bs->fileor even driver-specific children. This would allow you to find out whether some block in the top node came from the base node that we're going to keep. If yes, skip it; if no, copy it.
Quoted 6 lines
Quoted 4 lines
This way we wouldn't have to decide whether raw is a filter or not, because it wouldn't make a difference. The behaviour would only depend on the base node given by the user. If you specified the top-level qcow2 file as the base, you get your full copy;
ahm, full-copy = base is NULL..
Oops, yes, of course. Using the top-level node would create an empty "copy".
Quoted 10 lines
Quoted 7 lines
if you specified the backing
qcow2, you get the partial copy where the target still uses the same backing file.(Hm... It would only actually work if the offsets stay the same in the chain, which is true for backing file children, but not necessarily for other children.
Don't follow, what you mean by offsets stay the same and what is wrong with it?
Say we have this graph:
raw,offset=65536
|
v
qcow2-----+
| |
v v
file baseNow you can't just mirror the raw node into a target.qcow2 that shares base as the backing file, because the offsets will be wrong. In order to use such a copy correctly, you'd have to use a raw node again in the backing chain:
target.qcow2----+
| |
v v
file raw,offset=65536
| v
base
So the case where offsets differ between the top and the base node isn't trivial.
(If this case isn't complicated enough yet, imagine passing file as the base node instead... It just can't work.)
Kevin
Re: [Qemu-devel] [PATCH 1/2] block/raw-format: switch to BDRV_BLOCK_DATA with BDRV_BLOCK_RECURSE
Quoted 105 lines · Kevin Wolf
Am 13.08.2019 um 17:54 hat Vladimir Sementsov-Ogievskiy geschrieben:
Quoted 63 lines
Quoted 62 lines · Kevin Wolf
Am 13.08.2019 um 16:43 hat Max Reitz geschrieben:
Quoted 31 lines · Kevin Wolf
Quoted 17 lines
Am 12.08.2019 um 20:11 hat Vladimir Sementsov-Ogievskiy geschrieben:
Quoted 11 lines
BDRV_BLOCK_RAWmakes genericbdrv_co_block_statusto fallthrough to returned file. But is it correct behavior at all? If returned file itself has a backing file, we may report as totally unallocated and area which actually has data in bottom backing file.So, mirroring of qcow2 under raw-format is broken. Which is illustrated by following commit with a test. Let's make raw-format behave more correctly returning
BDRV_BLOCK_DATA.Suggested-by Max Reitz <[email protected]>Signed-off-by Vladimir Sementsov-Ogievskiy <[email protected]>After some reading, I think I came to the conclusion that RAW is the correct thing to do. There is indeed a problem, but this patch is trying to fix it in the wrong place.
Quoted 5 lines
In the case where the backing file contains some data, and we have a 'raw' node above the qcow2 overlay node, the content of the respective block is not defined by the queried backing file layer, so it is completely correct that
bdrv_is_allocated()returns false,like it would if you queried the qcow2 layer directly.I disagree. The queried backing file layer is the raw node. As I said, in my opinion raw nodes are not filter nodes, neither in behavior (they have an offset option), nor in how they are generally used (as a format).
The raw format does not support backing files. Therefore, everything on a raw node is allocated.
Quoted 7 lines
(That is, like, my opinion.)
Quoted 3 lines
If it returned true, we would
copy everything, which isn't right either (the test cases should may add the qemu-img map output of the target so this becomes visible).It is right.
So we don't even agree what mirroring the raw node should even mean.
I can the see your point when you say that the raw node has no backing file, so everything should be copied. But I can also see the point that the raw node can really just be used as a filter that limits the data exposed from the qcow2 layer, and you want to keep the copy a COW overlay over the same backing file.
Both are valid use cases in principle and there is no single right or wrong.
We don't currently support the latter use case because we have only sync=full or sync=top, but if you could specify a base node instead, we could probably suport the case without all of the special-casing filter nodes and backing file childs.
You would call
bdrv_co_block_status_above()with the right base node and it would just recurse whereever the data is stored, be itbs->backing,bs->fileor even driver-specific children. This would allow you to find out whether some block in the top node came from the base node that we're going to keep. If yes, skip it; if no, copy it.Quoted 6 lines
Quoted 4 lines
This way we wouldn't have to decide whether raw is a filter or not, because it wouldn't make a difference. The behaviour would only depend on the base node given by the user. If you specified the top-level qcow2 file as the base, you get your full copy;
ahm, full-copy = base is NULL..
Oops, yes, of course. Using the top-level node would create an empty "copy".
Quoted 10 lines
Quoted 7 lines
if you specified the backing
qcow2, you get the partial copy where the target still uses the same backing file.(Hm... It would only actually work if the offsets stay the same in the chain, which is true for backing file children, but not necessarily for other children.
Don't follow, what you mean by offsets stay the same and what is wrong with it?
Say we have this graph:
raw,offset=65536
| v qcow2-----+ | | v v file baseNow you can't just mirror the raw node into a target.qcow2 that shares base as the backing file, because the offsets will be wrong. In order to use such a copy correctly, you'd have to use a raw node again in the backing chain:
target.qcow2----+
| | v v file raw,offset=65536 |
Quoted 5 lines
v
baseSo the case where offsets differ between the top and the base node isn't trivial.
Understand, but for me it don't look like the thing that behaves in unexpected for user way, on the contrary, it seems obvious that it will not work, as user understand what is backing file (offsets are backed by corresponding offsets)
Quoted 4 lines
(If this case isn't complicated enough yet, imagine passing file as the base node instead... It just can't work.)
Yes, if we chose the way you proposed we have a possibility to use any node as a base, but again this does something completely different from usual "top" or "based" mode.. So it's just a new possibility, may be useless, it don't break up the concept.
I like the idea of generic block_status_above that you propose, but still there should a decision of what exactly DATA, ZERO and ALLOCATED means. Ok, assume we don't need ALLOCATED.. Then we don't need DATA too?
And how block_status_above would work? If node don't report ZERO and don't report DATA but report *file pointer == base, we should stop, and don't go to *file, it seems obvious..
But what if node reports ZERO together with *file pointer == base? Should consider this region belonging to base and UNALLOCATED and not copy it, or we should consider it ALLOCATED because current node reports it ZERO? So, criteria of "ALLOCATED" or "where should we stop in recursion" is not obvious.. Do you have one?
Signature · 2 lines
Best regards, Vladimir
Re: [Qemu-devel] [PATCH 1/2] block/raw-format: switch to BDRV_BLOCK_DATA with BDRV_BLOCK_RECURSE
13 авг. 2019 г. 19:32 пользователь Vladimir Sementsov-Ogievskiy <[email protected]> написал:
Quoted 105 lines · Kevin Wolf
Am 13.08.2019 um 17:54 hat Vladimir Sementsov-Ogievskiy geschrieben:
Quoted 63 lines
Quoted 62 lines · Kevin Wolf
Am 13.08.2019 um 16:43 hat Max Reitz geschrieben:
Quoted 31 lines · Kevin Wolf
Quoted 17 lines
Am 12.08.2019 um 20:11 hat Vladimir Sementsov-Ogievskiy geschrieben:
Quoted 11 lines
BDRV_BLOCK_RAWmakes genericbdrv_co_block_statusto fallthrough to returned file. But is it correct behavior at all? If returned file itself has a backing file, we may report as totally unallocated and area which actually has data in bottom backing file.So, mirroring of qcow2 under raw-format is broken. Which is illustrated by following commit with a test. Let's make raw-format behave more correctly returning
BDRV_BLOCK_DATA.Suggested-by Max Reitz <[email protected]>Signed-off-by Vladimir Sementsov-Ogievskiy <[email protected]>After some reading, I think I came to the conclusion that RAW is the correct thing to do. There is indeed a problem, but this patch is trying to fix it in the wrong place.
Quoted 5 lines
In the case where the backing file contains some data, and we have a 'raw' node above the qcow2 overlay node, the content of the respective block is not defined by the queried backing file layer, so it is completely correct that
bdrv_is_allocated()returns false,like it would if you queried the qcow2 layer directly.I disagree. The queried backing file layer is the raw node. As I said, in my opinion raw nodes are not filter nodes, neither in behavior (they have an offset option), nor in how they are generally used (as a format).
The raw format does not support backing files. Therefore, everything on a raw node is allocated.
Quoted 7 lines
(That is, like, my opinion.)
Quoted 3 lines
If it returned true, we would
copy everything, which isn't right either (the test cases should may add the qemu-img map output of the target so this becomes visible).It is right.
So we don't even agree what mirroring the raw node should even mean.
I can the see your point when you say that the raw node has no backing file, so everything should be copied. But I can also see the point that the raw node can really just be used as a filter that limits the data exposed from the qcow2 layer, and you want to keep the copy a COW overlay over the same backing file.
Both are valid use cases in principle and there is no single right or wrong.
We don't currently support the latter use case because we have only sync=full or sync=top, but if you could specify a base node instead, we could probably suport the case without all of the special-casing filter nodes and backing file childs.
You would call
bdrv_co_block_status_above()with the right base node and it would just recurse whereever the data is stored, be itbs->backing,bs->fileor even driver-specific children. This would allow you to find out whether some block in the top node came from the base node that we're going to keep. If yes, skip it; if no, copy it.Quoted 6 lines
Quoted 4 lines
This way we wouldn't have to decide whether raw is a filter or not, because it wouldn't make a difference. The behaviour would only depend on the base node given by the user. If you specified the top-level qcow2 file as the base, you get your full copy;
ahm, full-copy = base is NULL..
Oops, yes, of course. Using the top-level node would create an empty "copy".
Quoted 10 lines
Quoted 7 lines
if you specified the backing
qcow2, you get the partial copy where the target still uses the same backing file.(Hm... It would only actually work if the offsets stay the same in the chain, which is true for backing file children, but not necessarily for other children.
Don't follow, what you mean by offsets stay the same and what is wrong with it?
Say we have this graph:
raw,offset=65536
| v qcow2-----+ | | v v file baseNow you can't just mirror the raw node into a target.qcow2 that shares base as the backing file, because the offsets will be wrong. In order to use such a copy correctly, you'd have to use a raw node again in the backing chain:
target.qcow2----+
| | v v file raw,offset=65536 |
Quoted 5 lines
v
baseSo the case where offsets differ between the top and the base node isn't trivial.
Understand, but for me it don't look like the thing that behaves in unexpected for user way, on the contrary, it seems obvious that it will not work, as user understand what is backing file (offsets are backed by corresponding offsets)
Quoted 4 lines
(If this case isn't complicated enough yet, imagine passing file as the base node instead... It just can't work.)
Yes, if we chose the way you proposed we have a possibility to use any node as a base, but again this does something completely different from usual "top" or "based" mode.. So it's just a new possibility, may be useless, it don't break up the concept.
I like the idea of generic block_status_above that you propose, but still there should a decision of what exactly DATA, ZERO and ALLOCATED means. Ok, assume we don't need ALLOCATED.. Then we don't need DATA too?
And how block_status_above would work? If node don't report ZERO and don't report DATA but report *file pointer == base, we should stop, and don't go to *file, it seems obvious..
But what if node reports ZERO together with *file pointer == base? Should consider this region belonging to base and UNALLOCATED and not copy it, or we should consider it ALLOCATED because current node reports it ZERO? So, criteria of "ALLOCATED" or "where should we stop in recursion" is not obvious.. Do you have one?
And now I see a drawback of full recursion as Kevin proposes: it's slower when we are interested in allocation. We don't need to recurse through file* backing chain, if *file is not backing, as we already know that data is allocated.
Re: [Qemu-devel] [PATCH 1/2] block/raw-format: switch to BDRV_BLOCK_DATA with BDRV_BLOCK_RECURSE
In reply to Kevin WolfQuoted 40 lines · Kevin Wolf
Am 13.08.2019 um 16:43 hat Max Reitz geschrieben:
Quoted 31 lines · Kevin Wolf
Quoted 17 lines
Am 12.08.2019 um 20:11 hat Vladimir Sementsov-Ogievskiy geschrieben:
Quoted 11 lines
BDRV_BLOCK_RAWmakes genericbdrv_co_block_statusto fallthrough to returned file. But is it correct behavior at all? If returned file itself has a backing file, we may report as totally unallocated and area which actually has data in bottom backing file.So, mirroring of qcow2 under raw-format is broken. Which is illustrated by following commit with a test. Let's make raw-format behave more correctly returning
BDRV_BLOCK_DATA.Suggested-by Max Reitz <[email protected]>Signed-off-by Vladimir Sementsov-Ogievskiy <[email protected]>After some reading, I think I came to the conclusion that RAW is the correct thing to do. There is indeed a problem, but this patch is trying to fix it in the wrong place.
Quoted 5 lines
In the case where the backing file contains some data, and we have a 'raw' node above the qcow2 overlay node, the content of the respective block is not defined by the queried backing file layer, so it is completely correct that
bdrv_is_allocated()returns false,like it would if you queried the qcow2 layer directly.I disagree. The queried backing file layer is the raw node. As I said, in my opinion raw nodes are not filter nodes, neither in behavior (they have an offset option), nor in how they are generally used (as a format).
The raw format does not support backing files. Therefore, everything on a raw node is allocated.
Quoted 7 lines
(That is, like, my opinion.)
Quoted 3 lines
If it returned true, we would
copy everything, which isn't right either (the test cases should may add the qemu-img map output of the target so this becomes visible).It is right.
Quoted 7 lines
So we don't even agree what mirroring the raw node should even mean.
I can the see your point when you say that the raw node has no backing file, so everything should be copied. But I can also see the point that the raw node can really just be used as a filter that limits the data exposed from the qcow2 layer, and you want to keep the copy a COW overlay over the same backing file.
But it is not a filter. If you limit the data by using an offset, that precisely makes it not a filter.
Quoted 2 lines
Both are valid use cases in principle and there is no single right or wrong.
I don’t get what you mean because raw is not a filter.
If it were a filter, it’d be clear: Regarding allocation information, we skip it. But it isn’t. Hence we cannot skip it.
I don’t see why you’re trying to make the point with raw, when it simply is not a filter.
Quoted 4 lines
We don't currently support the latter use case because we have only sync=full or sync=top, but if you could specify a base node instead, we could probably suport the case without all of the special-casing filter nodes and backing file childs.
This sounds like it’d be difficult to special-case filter nodes. It isn’t.
Whenever the user specifies some node that should refer to a backing chain element, all you do is call bdrv_skip_rw_filters() and you land at the corresponding COW node.
Quoted 7 lines
You would call
bdrv_co_block_status_above()with the right base node and it would just recurse whereever the data is stored, be itbs->backing,bs->fileor even driver-specific children. This would allow you to find out whether some block in the top node came from the base node that we're going to keep. If yes, skip it; if no, copy it.This way we wouldn't have to decide whether raw is a filter or not,
Well, it isn’t.
Quoted 5 lines
because it wouldn't make a difference. The behaviour would only depend on the base node given by the user. If you specified the top-level qcow2 file as the base, you get your full copy; if you specified the backing qcow2, you get the partial copy where the target still uses the same backing file.
I simply do not see your point.
For two reasons:
(1) I don’t think anyone should use is_allocate on nodes that are not COW nodes. They are likely to be doing something wrong then.
You don’t seem to agree, because you say this makes the callers complicated. What I think is that we don’t have that many callers, and it’s probably a good thing when they have to think about the backing chain structure.
But anyway.
(2) What I understand is that you propose adding some way to find out the next element in the COW chain if is_allocated returns false. Well, my “Deal with filters” series adds two ways to do that:
- bdrv_filtered_cow_bs(bdrv_skip_rw_filters(bs)) will return the first child behind the COW node, but that may be another filter.
- bdrv_backing_chain_next(bs) will return “the first non-filter backing image of the first non-filter image.”. It’s just bdrv_skip_rw_filters(bdrv_filtered_cow_bs(bdrv_skip_rw_filters(bs))).
So the thing is, we don’t need to modify block_status to return that information. If is_allocated returns that something is not allocated, the caller can just call one of these and thus get the next node where to look.
When it comes to bdrv_is_allocated_above(), my series fixes that anyway, no? (In the sense that it does not choke on filters.)
So I cannot see how it does not come down to the callers.
Max
PATCH 2/2 iotests: test mirroring qcow2 under raw format
In reply to Vladimir Sementsov-OgievskiyCheck that it is fixed by previous commit
--- tests/qemu-iotests/263 | 46 ++++++++++++++++++++++++++++++++++++++ tests/qemu-iotests/263.out | 12 ++++++++++ tests/qemu-iotests/group | 1 + 3 files changed, 59 insertions(+) create mode 100755 tests/qemu-iotests/263 create mode 100644 tests/qemu-iotests/263.out
tests/qemu-iotests/263 new file +46 -0
@@ -0,0 +1,46 @@ +#!/usr/bin/env python +# +# Test mirroring qcow2 under raw-format +# +# Copyright (c) 2019 Virtuozzo International GmbH. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +import iotests +from iotests import qemu_img_create, qemu_io, filter_qemu_io, file_path, log + +iotests.verify_image_format(supported_fmts=['qcow2']) + +base, top, target = file_path('base', 'top', 'target') +size = 1024 * 1024 + +qemu_img_create('-f', iotests.imgfmt, base, str(size)) +log(filter_qemu_io(qemu_io('-f', iotests.imgfmt, + '-c', 'write -P 1 0 1M', base))) +qemu_img_create('-f', iotests.imgfmt, '-b', base, top, str(size)) + +vm = iotests.VM().add_drive(None, opts='driver=raw,size=' + str(size) + + ',file.driver=qcow2,file.file.filename=' + top) +vm.launch() + +vm.qmp_log('drive-mirror', device='drive0', target=target, sync='full', + filters=[iotests.filter_qmp_testfiles]) +log(vm.event_wait('BLOCK_JOB_READY'), filters=[iotests.filter_qmp_event]) +vm.qmp_log('block-job-complete', device='drive0') +vm.shutdown() + +log(filter_qemu_io(qemu_io('-f', 'raw', '-c', 'read -P 1 0 1M', target))) + +log('-- finish --') # avoid extra new-line at the end of .out file
tests/qemu-iotests/263.out new file +12 -0
@@ -0,0 +1,12 @@ +wrote 1048576/1048576 bytes at offset 0 +1 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) + +{"execute": "drive-mirror", "arguments": {"device": "drive0", "sync": "full", "target": "TEST_DIR/PID-target"}} +{"return": {}} +{"data": {"device": "drive0", "len": 1048576, "offset": 1048576, "speed": 0, "type": "mirror"}, "event": "BLOCK_JOB_READY", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}} +{"execute": "block-job-complete", "arguments": {"device": "drive0"}} +{"return": {}} +read 1048576/1048576 bytes at offset 0 +1 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) + +-- finish --
tests/qemu-iotests/group +1 -0
@@ -271,3 +271,4 @@ 254 rw backing quick 255 rw quick 256 rw quick +263 rw quick
Signature · 1 line
2.18.0
Re: [Qemu-devel] [PATCH 2/2] iotests: test mirroring qcow2 under raw format
Am 12.08.2019 um 20:11 hat Vladimir Sementsov-Ogievskiy geschrieben:
Quoted 39 lines
Check that it is fixed by previous commit
Signed-off-by Vladimir Sementsov-Ogievskiy <[email protected]>--- tests/qemu-iotests/263 | 46 ++++++++++++++++++++++++++++++++++++++ tests/qemu-iotests/263.out | 12 ++++++++++ tests/qemu-iotests/group | 1 + 3 files changed, 59 insertions(+) create mode 100755 tests/qemu-iotests/263 create mode 100644 tests/qemu-iotests/263.outtests/qemu-iotests/263 new file +22
-0@@ -0,0 +1,46 @@ +#!/usr/bin/env python +# +# Test mirroring qcow2 under raw-format +# +# Copyright (c) 2019 Virtuozzo International GmbH. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +import iotests +from iotests import qemu_img_create, qemu_io, filter_qemu_io, file_path, log
tests/qemu-iotests/263 line 32
Quoted 10 lines
tests/qemu-iotests/263 new file +10
-0+ +iotests.verify_image_format(supported_fmts=['qcow2']) + +base, top, target = file_path('base', 'top', 'target') +size = 1024 * 1024 + +qemu_img_create('-f', iotests.imgfmt, base, str(size)) +log(filter_qemu_io(qemu_io('-f', iotests.imgfmt, + '-c', 'write -P 1 0 1M', base))) +qemu_img_create('-f', iotests.imgfmt, '-b', base, top, str(size))
Who deletes these files at the end of the test? (There's a reason why all the other test cases uses 'with FilePath(...)'.)
Kevin
Re: [Qemu-devel] [PATCH 2/2] iotests: test mirroring qcow2 under raw format
Quoted 45 lines · Kevin Wolf
Am 12.08.2019 um 20:11 hat Vladimir Sementsov-Ogievskiy geschrieben:
Quoted 44 lines
Check that it is fixed by previous commit
Signed-off-by Vladimir Sementsov-Ogievskiy <[email protected]>--- tests/qemu-iotests/263 | 46 ++++++++++++++++++++++++++++++++++++++ tests/qemu-iotests/263.out | 12 ++++++++++ tests/qemu-iotests/group | 1 + 3 files changed, 59 insertions(+)create mode 100755 tests/qemu-iotests/263
create mode 100644 tests/qemu-iotests/263.outtests/qemu-iotests/263 new file +27
-0@@ -0,0 +1,46 @@ +#!/usr/bin/env python +# +# Test mirroring qcow2 under raw-format +# +# Copyright (c) 2019 Virtuozzo International GmbH. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +import iotests +from iotests import qemu_img_create, qemu_io, filter_qemu_io, file_path, log + +iotests.verify_image_format(supported_fmts=['qcow2']) + +base, top, target = file_path('base', 'top', 'target') +size = 1024 * 1024
Quoted 9 lines
tests/qemu-iotests/263 line 32
Quoted 5 lines
tests/qemu-iotests/263 new file +5
-0+ +qemu_img_create('-f', iotests.imgfmt, base, str(size)) +log(filter_qemu_io(qemu_io('-f', iotests.imgfmt, + '-c', 'write -P 1 0 1M', base))) +qemu_img_create('-f', iotests.imgfmt, '-b', base, top, str(size))Who deletes these files at the end of the test? (There's a reason why all the other test cases uses 'with FilePath(...)'.)
file_path sets corresponding handling, it's alternative to FilePath
Signature · 2 lines
Best regards, Vladimir
Re: [Qemu-devel] [PATCH 2/2] iotests: test mirroring qcow2 under raw format
Am 13.08.2019 um 11:22 hat Vladimir Sementsov-Ogievskiy geschrieben:
Quoted 56 lines
Quoted 45 lines · Kevin Wolf
Am 12.08.2019 um 20:11 hat Vladimir Sementsov-Ogievskiy geschrieben:
Quoted 44 lines
Check that it is fixed by previous commit
Signed-off-by Vladimir Sementsov-Ogievskiy <[email protected]>--- tests/qemu-iotests/263 | 46 ++++++++++++++++++++++++++++++++++++++ tests/qemu-iotests/263.out | 12 ++++++++++ tests/qemu-iotests/group | 1 + 3 files changed, 59 insertions(+)create mode 100755 tests/qemu-iotests/263
create mode 100644 tests/qemu-iotests/263.outtests/qemu-iotests/263 new file +27
-0@@ -0,0 +1,46 @@ +#!/usr/bin/env python +# +# Test mirroring qcow2 under raw-format +# +# Copyright (c) 2019 Virtuozzo International GmbH. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +import iotests +from iotests import qemu_img_create, qemu_io, filter_qemu_io, file_path, log + +iotests.verify_image_format(supported_fmts=['qcow2']) + +base, top, target = file_path('base', 'top', 'target') +size = 1024 * 1024Quoted 9 lines
tests/qemu-iotests/263 line 32
Quoted 5 lines
tests/qemu-iotests/263 new file +5
-0+ +qemu_img_create('-f', iotests.imgfmt, base, str(size)) +log(filter_qemu_io(qemu_io('-f', iotests.imgfmt, + '-c', 'write -P 1 0 1M', base))) +qemu_img_create('-f', iotests.imgfmt, '-b', base, top, str(size))Who deletes these files at the end of the test? (There's a reason why all the other test cases uses 'with FilePath(...)'.)
Quoted 1 line
file_pathsets corresponding handling, it's alternative to FilePath
Ah, I see it uses atexit. Thanks, I didn't know this feature yet.
Kevin
Max Reitz
AppliedQuoted 6 lines · Vladimir Sementsov-Ogievskiy
Hi all!
I'm not sure, is it a bug or a feature, but using qcow2 under raw is broken. It should be either fixed like I propose (by Max's suggestion) or somehow forbidden (just forbid backing-file supporting node to be file child of raw-format node).
I agree, I think only filters should return BDRV_BLOCK_RAW.
(And not even them, they should just be handled transparently by bdrv_co_block_status(). But that’s something for later.)
Quoted 11 lines
Vladimir Sementsov-Ogievskiy (2):
block/raw-format: switch toBDRV_BLOCK_DATAwithBDRV_BLOCK_RECURSE
iotests: test mirroring qcow2 under raw formatblock/raw-format.c | 2 +- tests/qemu-iotests/263 | 46 ++++++++++++++++++++++++++++++++++++++ tests/qemu-iotests/263.out | 12 ++++++++++ tests/qemu-iotests/group | 1 + 4 files changed, 60 insertions(+), 1 deletion(-) create mode 100755 tests/qemu-iotests/263 create mode 100644 tests/qemu-iotests/263.out
Thanks, applied to my block-next branch:
https://git.xanclic.moe/XanClic/qemu/commits/branch/block-next
Max
Quoted 25 lines · Max Reitz
Quoted 6 lines · Vladimir Sementsov-Ogievskiy
Hi all!
I'm not sure, is it a bug or a feature, but using qcow2 under raw is broken. It should be either fixed like I propose (by Max's suggestion) or somehow forbidden (just forbid backing-file supporting node to be file child of raw-format node).
I agree, I think only filters should return
BDRV_BLOCK_RAW.(And not even them, they should just be handled transparently by
bdrv_co_block_status(). But that’s something for later.)Quoted 11 lines
Vladimir Sementsov-Ogievskiy (2):
block/raw-format: switch toBDRV_BLOCK_DATAwithBDRV_BLOCK_RECURSE
iotests: test mirroring qcow2 under raw formatblock/raw-format.c | 2 +- tests/qemu-iotests/263 | 46 ++++++++++++++++++++++++++++++++++++++ tests/qemu-iotests/263.out | 12 ++++++++++ tests/qemu-iotests/group | 1 + 4 files changed, 60 insertions(+), 1 deletion(-) create mode 100755 tests/qemu-iotests/263 create mode 100644 tests/qemu-iotests/263.out
Quoted 3 lines
Thanks, applied to my block-next branch:
https://git.xanclic.moe/XanClic/qemu/commits/branch/block-next
Oops, maybe not. 221 needs to be adjusted.
Max
Quoted 26 lines · Max Reitz
Quoted 25 lines · Max Reitz
Quoted 6 lines · Vladimir Sementsov-Ogievskiy
Hi all!
I'm not sure, is it a bug or a feature, but using qcow2 under raw is broken. It should be either fixed like I propose (by Max's suggestion) or somehow forbidden (just forbid backing-file supporting node to be file child of raw-format node).
I agree, I think only filters should return
BDRV_BLOCK_RAW.(And not even them, they should just be handled transparently by
bdrv_co_block_status(). But that’s something for later.)Quoted 11 lines
Vladimir Sementsov-Ogievskiy (2):
block/raw-format: switch toBDRV_BLOCK_DATAwithBDRV_BLOCK_RECURSE
iotests: test mirroring qcow2 under raw formatblock/raw-format.c | 2 +- tests/qemu-iotests/263 | 46 ++++++++++++++++++++++++++++++++++++++ tests/qemu-iotests/263.out | 12 ++++++++++ tests/qemu-iotests/group | 1 + 4 files changed, 60 insertions(+), 1 deletion(-)create mode 100755 tests/qemu-iotests/263
create mode 100644 tests/qemu-iotests/263.out
Quoted 6 lines
Quoted 3 lines
Thanks, applied to my block-next branch:
https://git.xanclic.moe/XanClic/qemu/commits/branch/block-next
Oops, maybe not. 221 needs to be adjusted.
Hmm yes, I forget to run tests.. Areas which were zero becomes data|zero, it don't look good.
So, it's not quite right to report DATA | RECURSE, we actually should report DATA_OR_ZERO | RECURSE, which is actually ALLOCATED | RECURSE, as otherwise DATA will be set in final result (generic layer must not drop it, obviously).
ALLOCATED never returned by drivers but seems it should be. I'll think a bit and resend something new.
Signature · 2 lines
Best regards, Vladimir
Quoted 38 lines · Vladimir Sementsov-Ogievskiy
Quoted 26 lines · Max Reitz
Quoted 25 lines · Max Reitz
Quoted 6 lines · Vladimir Sementsov-Ogievskiy
Hi all!
I'm not sure, is it a bug or a feature, but using qcow2 under raw is broken. It should be either fixed like I propose (by Max's suggestion) or somehow forbidden (just forbid backing-file supporting node to be file child of raw-format node).
I agree, I think only filters should return
BDRV_BLOCK_RAW.(And not even them, they should just be handled transparently by bdrv_co_block_status(). But that’s something for later.)
Quoted 11 lines
Vladimir Sementsov-Ogievskiy (2):
block/raw-format: switch toBDRV_BLOCK_DATAwithBDRV_BLOCK_RECURSE
iotests: test mirroring qcow2 under raw formatblock/raw-format.c | 2 +-
tests/qemu-iotests/263 | 46 ++++++++++++++++++++++++++++++++++++++ tests/qemu-iotests/263.out | 12 ++++++++++ tests/qemu-iotests/group | 1 +4 files changed, 60 insertions(+), 1 deletion(-)create mode 100755 tests/qemu-iotests/263
create mode 100644 tests/qemu-iotests/263.outQuoted 6 lines
Quoted 3 lines
Thanks, applied to my block-next branch:
https://git.xanclic.moe/XanClic/qemu/commits/branch/block-next
Oops, maybe not. 221 needs to be adjusted.
Hmm yes, I forget to run tests.. Areas which were zero becomes data|zero, it don't look good.
Quoted 8 lines
So, it's not quite right to report DATA | RECURSE, we actually should report
DATA_OR_ZERO| RECURSE, which is actually ALLOCATED | RECURSE, as otherwise DATA will be set in final result (generic layer must not drop it, obviously).ALLOCATED never returned by drivers but seems it should be. I'll think a bit and resend something new.
Hmmm.. So, we have raw node, and assume backing chain under it. who should loop through it, generic code or raw driver?
Now it all looks like generic code is responsible for looping through filtered chain (backing files and filters) and driver is responsible for all it's children except for filtered child.
Or, driver may return something that says to generic child to handle the whole backing chain of returned file at once, as it's another backing chain. And seems even RECURSE don't work correctly as it doesn't handle the backing chain in this recursion. Why it works better than RAW - just because we return it together with DATA flags and this DATA flag is kept anyway, independently of finding zeros or not.
Signature · 2 lines
Best regards, Vladimir
Quoted 52 lines · Vladimir Sementsov-Ogievskiy
Quoted 38 lines · Vladimir Sementsov-Ogievskiy
Quoted 26 lines · Max Reitz
Quoted 25 lines · Max Reitz
Quoted 6 lines · Vladimir Sementsov-Ogievskiy
Hi all!
I'm not sure, is it a bug or a feature, but using qcow2 under raw is broken. It should be either fixed like I propose (by Max's suggestion) or somehow forbidden (just forbid backing-file supporting node to be file child of raw-format node).
I agree, I think only filters should return
BDRV_BLOCK_RAW.(And not even them, they should just be handled transparently by bdrv_co_block_status(). But that’s something for later.)
Quoted 11 lines
Vladimir Sementsov-Ogievskiy (2):
block/raw-format: switch toBDRV_BLOCK_DATAwithBDRV_BLOCK_RECURSE
iotests: test mirroring qcow2 under raw formatblock/raw-format.c | 2 +-
tests/qemu-iotests/263 | 46 ++++++++++++++++++++++++++++++++++++++ tests/qemu-iotests/263.out | 12 ++++++++++ tests/qemu-iotests/group | 1 +4 files changed, 60 insertions(+), 1 deletion(-)create mode 100755 tests/qemu-iotests/263
create mode 100644 tests/qemu-iotests/263.outQuoted 6 lines
Quoted 3 lines
Thanks, applied to my block-next branch:
https://git.xanclic.moe/XanClic/qemu/commits/branch/block-next
Oops, maybe not. 221 needs to be adjusted.
Hmm yes, I forget to run tests.. Areas which were zero becomes data|zero, it don't look good.
Quoted 8 lines
So, it's not quite right to report DATA | RECURSE, we actually should report
DATA_OR_ZERO| RECURSE, which is actually ALLOCATED | RECURSE, as otherwise DATA will be set in final result (generic layer must not drop it, obviously).ALLOCATED never returned by drivers but seems it should be. I'll think a bit and resend something new.
Hmmm.. So, we have raw node, and assume backing chain under it. who should loop through it, generic code or raw driver?
Quoted 9 lines
Now it all looks like generic code is responsible for looping through filtered chain (backing files and filters) and driver is responsible for all it's children except for filtered child.
Or, driver may return something that says to generic child to handle the whole backing chain of returned file at once, as it's another backing chain. And seems even RECURSE don't work correctly as it doesn't handle the backing chain in this recursion. Why it works better than RAW - just because we return it together with DATA flags and this DATA flag is kept anyway, independently of finding zeros or not.
Hmm, so, is it correct that we return DATA | RECURSE, if we are not really sure that it is data?
If we see at
* BDRV_BLOCK_DATA: allocation for data at offset is tied to this layer
seems like we should report DATA only if there is allocation..
* DATA ZERO OFFSET_VALID
* t t t sectors read as zero, returned file is zero at offset * t f t sectors read as valid from file at offset * f t t sectors preallocated, read as zero, returned file not
so, ZERO alone doesn't guarantee that we may safely read?
So, for qcow2 metadata-preallocated images, what about zero-init? We report DATA, and probably get ZERO from file and have finally DAYA | ZERO which guarantees that read will return zeros, but is it true?
Finally, what "DATA" mean? That space is allocated and occupies disk space? Or it only means only ALLOCATED i.e. "read from this layer, not from backing" otherwise, and adds additional meaning to ZERO when used together, that read will return zeros for sure?
Signature · 2 lines
Best regards, Vladimir
Quoted 77 lines · Vladimir Sementsov-Ogievskiy
Quoted 52 lines · Vladimir Sementsov-Ogievskiy
Quoted 38 lines · Vladimir Sementsov-Ogievskiy
Quoted 26 lines · Max Reitz
Quoted 25 lines · Max Reitz
Quoted 6 lines · Vladimir Sementsov-Ogievskiy
Hi all!
I'm not sure, is it a bug or a feature, but using qcow2 under raw is broken. It should be either fixed like I propose (by Max's suggestion) or somehow forbidden (just forbid backing-file supporting node to be file child of raw-format node).
I agree, I think only filters should return
BDRV_BLOCK_RAW.(And not even them, they should just be handled transparently by bdrv_co_block_status(). But that’s something for later.)
Quoted 11 lines
Vladimir Sementsov-Ogievskiy (2):
block/raw-format: switch toBDRV_BLOCK_DATAwithBDRV_BLOCK_RECURSE
iotests: test mirroring qcow2 under raw formatblock/raw-format.c | 2 +-
tests/qemu-iotests/263 | 46 ++++++++++++++++++++++++++++++++++++++ tests/qemu-iotests/263.out | 12 ++++++++++ tests/qemu-iotests/group | 1 +4 files changed, 60 insertions(+), 1 deletion(-)create mode 100755 tests/qemu-iotests/263
create mode 100644 tests/qemu-iotests/263.outQuoted 6 lines
Quoted 3 lines
Thanks, applied to my block-next branch:
https://git.xanclic.moe/XanClic/qemu/commits/branch/block-next
Oops, maybe not. 221 needs to be adjusted.
Hmm yes, I forget to run tests.. Areas which were zero becomes data|zero, it don't look good.
Quoted 8 lines
So, it's not quite right to report DATA | RECURSE, we actually should report
DATA_OR_ZERO| RECURSE, which is actually ALLOCATED | RECURSE, as otherwise DATA will be set in final result (generic layer must not drop it, obviously).ALLOCATED never returned by drivers but seems it should be. I'll think a bit and resend something new.
Hmmm.. So, we have raw node, and assume backing chain under it. who should loop through it, generic code or raw driver?
Quoted 9 lines
Now it all looks like generic code is responsible for looping through filtered chain (backing files and filters) and driver is responsible for all it's children except for filtered child.
Or, driver may return something that says to generic child to handle the whole backing chain of returned file at once, as it's another backing chain. And seems even RECURSE don't work correctly as it doesn't handle the backing chain in this recursion. Why it works better than RAW - just because we return it together with DATA flags and this DATA flag is kept anyway, independently of finding zeros or not.
Hmm, so, is it correct that we return DATA | RECURSE, if we are not really sure that it is data?
If we see at
*
BDRV_BLOCK_DATA: allocation for data at offset is tied to this layerseems like we should report DATA only if there is allocation..
* DATA ZERO
OFFSET_VALID
* t t t sectors read as zero, returned file is zero at offset * t f t sectors read as valid from file at offset * f t t sectors preallocated, read as zero, returned file not
Quoted 9 lines
so, ZERO alone doesn't guarantee that we may safely read?
So, for qcow2 metadata-preallocated images, what about zero-init? We report DATA, and probably get ZERO from file and have finally DAYA | ZERO which guarantees that read will return zeros, but is it true?
Finally, what "DATA" mean? That space is allocated and occupies disk space? Or it only means only ALLOCATED i.e. "read from this layer, not from backing" otherwise, and adds additional meaning to ZERO when used together, that read will return zeros for sure?
Continue self-discussion.
Consider closer the following case:
Quoted 2 lines
* DATA ZERO
OFFSET_VALID
* f t t sectors preallocated, read as zero, returned file not
It actually means that we must not read, as read will return wrong data, when clusters are actually zero for guest.
It's OK, when for ex. qcow2 returns this combination and link to its file child: it means that if you read from qcow2 node, you'll see correct zeros, as qcow2 has special metadata which shows that these clusters are zero. But if you read from file directly at returned offset you'll see garbage, so don't do it.
But what if some node returns this combination with file == itself? It actually means that you must not read, but you should call block-status to understand that there are zeros. So, if some format can return this combination with file == itself it means that you must not read it directly, but only after checking block status.
And file-posix is example of such driver. But file-posix holes are guaranteed to read as zero, so we can report DATA | ZERO. But this will break user expirience which assumes that DATA means occupation of real disk space.
...
me go and re-read what we've documented in NBD protocol about block steus...
"DATA" turns into NBD_STATE_HOLE, which formally means nothing, and just notes that probably there is no disk space occupation for this region.. So it's about disk space allocation and nothing about correctness of read.
and NBD_STATE_ZERO guarantees that region read as all zeroes.
Look at code in nbd/server.c.. Aha, it calls block_status_above and turns !ALLOCATED into HOLE. Which means that it will never return HOLE for file-posix..
Signature · 2 lines
Best regards, Vladimir
Am 13.08.2019 um 13:14 hat Vladimir Sementsov-Ogievskiy geschrieben:
Quoted 78 lines
Quoted 77 lines · Vladimir Sementsov-Ogievskiy
Quoted 52 lines · Vladimir Sementsov-Ogievskiy
Quoted 38 lines · Vladimir Sementsov-Ogievskiy
Quoted 26 lines · Max Reitz
Quoted 25 lines · Max Reitz
Quoted 6 lines · Vladimir Sementsov-Ogievskiy
Hi all!
I'm not sure, is it a bug or a feature, but using qcow2 under raw is broken. It should be either fixed like I propose (by Max's suggestion) or somehow forbidden (just forbid backing-file supporting node to be file child of raw-format node).
I agree, I think only filters should return
BDRV_BLOCK_RAW.(And not even them, they should just be handled transparently by bdrv_co_block_status(). But that’s something for later.)
Quoted 11 lines
Vladimir Sementsov-Ogievskiy (2):
block/raw-format: switch toBDRV_BLOCK_DATAwithBDRV_BLOCK_RECURSE
iotests: test mirroring qcow2 under raw formatblock/raw-format.c | 2 +-
tests/qemu-iotests/263 | 46 ++++++++++++++++++++++++++++++++++++++ tests/qemu-iotests/263.out | 12 ++++++++++ tests/qemu-iotests/group | 1 +4 files changed, 60 insertions(+), 1 deletion(-)create mode 100755 tests/qemu-iotests/263
create mode 100644 tests/qemu-iotests/263.outQuoted 6 lines
Quoted 3 lines
Thanks, applied to my block-next branch:
https://git.xanclic.moe/XanClic/qemu/commits/branch/block-next
Oops, maybe not. 221 needs to be adjusted.
Hmm yes, I forget to run tests.. Areas which were zero becomes data|zero, it don't look good.
Quoted 8 lines
So, it's not quite right to report DATA | RECURSE, we actually should report
DATA_OR_ZERO| RECURSE, which is actually ALLOCATED | RECURSE, as otherwise DATA will be set in final result (generic layer must not drop it, obviously).ALLOCATED never returned by drivers but seems it should be. I'll think a bit and resend something new.
Hmmm.. So, we have raw node, and assume backing chain under it. who should loop through it, generic code or raw driver?
Quoted 9 lines
Now it all looks like generic code is responsible for looping through filtered chain (backing files and filters) and driver is responsible for all it's children except for filtered child.
Or, driver may return something that says to generic child to handle the whole backing chain of returned file at once, as it's another backing chain. And seems even RECURSE don't work correctly as it doesn't handle the backing chain in this recursion. Why it works better than RAW - just because we return it together with DATA flags and this DATA flag is kept anyway, independently of finding zeros or not.
Hmm, so, is it correct that we return DATA | RECURSE, if we are not really sure that it is data?
If we see at
*
BDRV_BLOCK_DATA: allocation for data at offset is tied to this layerseems like we should report DATA only if there is allocation..
* DATA ZERO
OFFSET_VALID
* t t t sectors read as zero, returned file is zero at offset * t f t sectors read as valid from file at offset * f t t sectors preallocated, read as zero, returned file not
Quoted 8 lines
Quoted 8 lines
so, ZERO alone doesn't guarantee that we may safely read?
So, for qcow2 metadata-preallocated images, what about zero-init? We report DATA, and probably get ZERO from file and have finally DAYA | ZERO which guarantees that read will return zeros, but is it true?
Finally, what "DATA" mean? That space is allocated and occupies disk space? Or it only means only ALLOCATED i.e. "read from this layer, not from backing" otherwise, and adds additional meaning to ZERO when used together, that read will return zeros for sure?
I think DATA means that the data for this block is provided by *file. I wouldn't necessarily understand it to mean that the data actually takes up physical disk space there.
Quoted 8 lines
Continue self-discussion.
Consider closer the following case:
Quoted 2 lines
* DATA ZERO
OFFSET_VALID
* f t t sectors preallocated, read as zero, returned file notIt actually means that we must not read, as read will return wrong data, when clusters are actually zero for guest.
It means that you need to read from bs itself to get the correct data (which will be zero). Even though OFFSET_VALID is set, reading from *file (typically bs->file->bs) at the returned offset might not give the right result.
Quoted 5 lines
It's OK, when for ex. qcow2 returns this combination and link to its file child: it means that if you read from qcow2 node, you'll see correct zeros, as qcow2 has special metadata which shows that these clusters are zero. But if you read from file directly at returned offset you'll see garbage, so don't do it.
Correct.
Quoted 5 lines
But what if some node returns this combination with file == itself? It actually means that you must not read, but you should call block-status to understand that there are zeros. So, if some format can return this combination with file == itself it means that you must not read it directly, but only after checking block status.
This doesn't make sense to me. Reading from a node is always correct.
But you're right that DATA seems to mean something slightly different at the protocol level because *file cannot have a meaningful value for the lower layer there. In this case, DATA still seems to mean that the data is fetched from the lower layer (i.e. the block device on which the file system resides). For holes, this is not the case.
Quoted 2 lines
And file-posix is example of such driver. But file-posix holes are guaranteed to read as zero, so we can report DATA | ZERO. But this will break user expirience which assumes that DATA means occupation of real disk space.
With the above explanation, DATA shouldn't be set for holes.
But it's still kind of inconsistent because OFFSET_VALID and the offset refer to bs itself and not to the lower layer.
Quoted 9 lines
...
me go and re-read what we've documented in NBD protocol about block steus..."DATA" turns into
NBD_STATE_HOLE, which formally means nothing, and just notes that probably there is no disk space occupation for this region.. So it's about disk space allocation and nothing about correctness of read.
andNBD_STATE_ZEROguarantees that region read as all zeroes.Look at code in
nbd/server.c.. Aha, it callsblock_status_aboveand turns !ALLOCATED into HOLE. Which means that it will never return HOLE for file-posix..
Hm... This is a mess. :-)
Kevin
Quoted 139 lines · Kevin Wolf
Am 13.08.2019 um 13:14 hat Vladimir Sementsov-Ogievskiy geschrieben:
Quoted 78 lines
Quoted 77 lines · Vladimir Sementsov-Ogievskiy
Quoted 52 lines · Vladimir Sementsov-Ogievskiy
Quoted 38 lines · Vladimir Sementsov-Ogievskiy
Quoted 26 lines · Max Reitz
Quoted 25 lines · Max Reitz
Quoted 6 lines · Vladimir Sementsov-Ogievskiy
Hi all!
I'm not sure, is it a bug or a feature, but using qcow2 under raw is broken. It should be either fixed like I propose (by Max's suggestion) or somehow forbidden (just forbid backing-file supporting node to be file child of raw-format node).
I agree, I think only filters should return
BDRV_BLOCK_RAW.(And not even them, they should just be handled transparently by bdrv_co_block_status(). But that’s something for later.)
Quoted 11 lines
Vladimir Sementsov-Ogievskiy (2):
block/raw-format: switch toBDRV_BLOCK_DATAwithBDRV_BLOCK_RECURSE
iotests: test mirroring qcow2 under raw formatblock/raw-format.c | 2 +- tests/qemu-iotests/263 | 46 ++++++++++++++++++++++++++++++++++++++ tests/qemu-iotests/263.out | 12 ++++++++++ tests/qemu-iotests/group | 1 + 4 files changed, 60 insertions(+), 1 deletion(-)create mode 100755 tests/qemu-iotests/263
create mode 100644 tests/qemu-iotests/263.outQuoted 6 lines
Quoted 3 lines
Thanks, applied to my block-next branch:
https://git.xanclic.moe/XanClic/qemu/commits/branch/block-next
Oops, maybe not. 221 needs to be adjusted.
Hmm yes, I forget to run tests.. Areas which were zero becomes data|zero, it don't look good.
Quoted 8 lines
So, it's not quite right to report DATA | RECURSE, we actually should report
DATA_OR_ZERO| RECURSE, which is actually ALLOCATED | RECURSE, as otherwise DATA will be set in final result (generic layer must not drop it, obviously).ALLOCATED never returned by drivers but seems it should be. I'll think a bit and resend something new.
Hmmm.. So, we have raw node, and assume backing chain under it. who should loop through it, generic code or raw driver?
Quoted 9 lines
Now it all looks like generic code is responsible for looping through filtered chain (backing files and filters) and driver is responsible for all it's children except for filtered child.
Or, driver may return something that says to generic child to handle the whole backing chain of returned file at once, as it's another backing chain. And seems even RECURSE don't work correctly as it doesn't handle the backing chain in this recursion. Why it works better than RAW - just because we return it together with DATA flags and this DATA flag is kept anyway, independently of finding zeros or not.
Hmm, so, is it correct that we return DATA | RECURSE, if we are not really sure that it is data?
If we see at
*
BDRV_BLOCK_DATA: allocation for data at offset is tied to this layerseems like we should report DATA only if there is allocation..
* DATA ZERO
OFFSET_VALID
* t t t sectors read as zero, returned file is zero at offset * t f t sectors read as valid from file at offset * f t t sectors preallocated, read as zero, returned file notQuoted 8 lines
Quoted 8 lines
so, ZERO alone doesn't guarantee that we may safely read?
So, for qcow2 metadata-preallocated images, what about zero-init? We report DATA, and probably get ZERO from file and have finally DAYA | ZERO which guarantees that read will return zeros, but is it true?
Finally, what "DATA" mean? That space is allocated and occupies disk space? Or it only means only ALLOCATED i.e. "read from this layer, not from backing" otherwise, and adds additional meaning to ZERO when used together, that read will return zeros for sure?
I think DATA means that the data for this block is provided by *file. I wouldn't necessarily understand it to mean that the data actually takes up physical disk space there.
Quoted 8 lines
Continue self-discussion.
Consider closer the following case:
Quoted 2 lines
* DATA ZERO
OFFSET_VALID
* f t t sectors preallocated, read as zero, returned file notIt actually means that we must not read, as read will return wrong data, when clusters are actually zero for guest.
It means that you need to read from bs itself to get the correct data (which will be zero). Even though
OFFSET_VALIDis set, reading from *file (typicallybs->file->bs) at the returned offset might not give the right result.Quoted 5 lines
It's OK, when for ex. qcow2 returns this combination and link to its file child: it means that if you read from qcow2 node, you'll see correct zeros, as qcow2 has special metadata which shows that these clusters are zero. But if you read from file directly at returned offset you'll see garbage, so don't do it.
Correct.
Quoted 5 lines
But what if some node returns this combination with file == itself? It actually means that you must not read, but you should call block-status to understand that there are zeros. So, if some format can return this combination with file == itself it means that you must not read it directly, but only after checking block status.
This doesn't make sense to me. Reading from a node is always correct.
But you're right that DATA seems to mean something slightly different at the protocol level because *file cannot have a meaningful value for the lower layer there. In this case, DATA still seems to mean that the data is fetched from the lower layer (i.e. the block device on which the file system resides). For holes, this is not the case.
Quoted 2 lines
And file-posix is example of such driver. But file-posix holes are guaranteed to read as zero, so we can report DATA | ZERO. But this will break user expirience which assumes that DATA means occupation of real disk space.
With the above explanation, DATA shouldn't be set for holes.
But it's still kind of inconsistent because
OFFSET_VALIDand the offset refer to bs itself and not to the lower layer.Quoted 3 lines
...
me go and re-read what we've documented in NBD protocol about block steus...
Quoted 9 lines
Quoted 6 lines
"DATA" turns into
NBD_STATE_HOLE, which formally means nothing, and just notes that probably there is no disk space occupation for this region.. So it's about disk space allocation and nothing about correctness of read.
andNBD_STATE_ZEROguarantees that region read as all zeroes.Look at code in
nbd/server.c.. Aha, it callsblock_status_aboveand turns !ALLOCATED into HOLE. Which means that it will never return HOLE for file-posix..Hm... This is a mess. :-)
I'm afraid the these all are consequences of really different usages of BLOCK_STATUS:
1. For backing-chain aware block-jobs, to work with overlays. So backing children are different from the others, as they are presenting overlays, which may be used in separate, and other children are not overlays and "more owned" by their parents
2. To understand where are zeroes and improve performance of copying loops (not copying zeroes, not sending zeroes through the wire, use effective write_zeroes)
3. To show file-mapping (qemu-img map)
4. Mirror use it to do DISCARD if "UNALLOCATED", but seems wrong for me now.. For which driver bdrv_block_status_above(source, NULL,...) will return UNALLOCATED? Seems neither file-posix nor qcow2.
anything else?
May be we should split these use cases instead of trying to combine them using a lot of returned flags and parameters?
Signature · 2 lines
Best regards, Vladimir
On 13.08.19 13:51, Kevin Wolf wrote:
[...]
Quoted 1 line
Hm... This is a mess. :-)
Just out of curiosity: Why?
Aren’t there only two things we really need from the block_status infrastructure?
(1) Whether something is allocated in the given layer of the backing chain,
(2) Whether we know that a given range reads as zeroes.
Do we really need anything else?
Max
Quoted 8 lines · Max Reitz
On 13.08.19 13:51, Kevin Wolf wrote:
[...]
Quoted 1 line
Hm... This is a mess. :-)
Just out of curiosity: Why?
Quoted 9 lines
Aren’t there only two things we really need from the
block_statusinfrastructure?(1) Whether something is allocated in the given layer of the backing chain,
(2) Whether we know that a given range reads as zeroes.
Do we really need anything else?
qemu-img map?
1. We need to fix the bug somehow
2. We need to fix comment about different block-status flags, as it really lacks information of what actually "DATA" means (together with *file). And what finally means "allocated", can you define it precisely?
3. Fix nbd-server to be closer to NBD spec about block-status
I made several tries to imagine [1] and [2] but never succeeded..
Signature · 2 lines
Best regards, Vladimir
Quoted 12 lines · Vladimir Sementsov-Ogievskiy
Quoted 11 lines · Max Reitz
On 13.08.19 13:51, Kevin Wolf wrote:
[...]
Quoted 1 line
Hm... This is a mess. :-)
Just out of curiosity: Why?
Aren’t there only two things we really need from the
block_statusinfrastructure?
Quoted 8 lines
Quoted 6 lines
(1) Whether something is allocated in the given layer of the backing chain,
(2) Whether we know that a given range reads as zeroes.
Do we really need anything else?
qemu-img map?
Which is a debugging tool. So it doesn’t fall under “really” in my book. If removing everything but allocation+zero information would make the code a lot simpler, I think that would be worth it.
Quoted 4 lines
1. We need to fix the bug somehow
2. We need to fix comment about different block-status flags, as it really lacks information of what actually "DATA" means (together with *file). And what finally means "allocated", can you define it precisely?
As I wrote in my other mails, I think the problem is that it’s just unexpected that block_status automatically skips through for filters. It shouldn’t, that’s just black magic that the caller should not rely on.
(We see precisely here that it’s wrong, because the callers are not prepared for the allocation information returned to be associated with a different node than what they passed.)
So my definition is just “If the node has a COW backing file and block_status returns ‘not allocated’, the data will be there. Otherwise, the data is in the current node.” Yes, that means that filters should appear as fully allocated.
Max
Quoted 5 lines
3. Fix nbd-server to be closer to NBD spec about block-status
I made several tries to imagine [1] and [2] but never succeeded..
Am 13.08.2019 um 16:53 hat Max Reitz geschrieben:
Quoted 35 lines · Vladimir Sementsov-Ogievskiy
Quoted 12 lines
Quoted 11 lines · Max Reitz
On 13.08.19 13:51, Kevin Wolf wrote:
[...]
Quoted 1 line
Hm... This is a mess. :-)
Just out of curiosity: Why?
Aren’t there only two things we really need from the
block_statusinfrastructure?Quoted 8 lines
Quoted 6 lines
(1) Whether something is allocated in the given layer of the backing chain,
(2) Whether we know that a given range reads as zeroes.
Do we really need anything else?
qemu-img map?
Which is a debugging tool. So it doesn’t fall under “really” in my book. If removing everything but allocation+zero information would make the code a lot simpler, I think that would be worth it.
Quoted 4 lines
1. We need to fix the bug somehow
2. We need to fix comment about different block-status flags, as it really lacks information of what actually "DATA" means (together with *file). And what finally means "allocated", can you define it precisely?As I wrote in my other mails, I think the problem is that it’s just unexpected that
block_statusautomatically skips through for filters. It shouldn’t, that’s just black magic that the caller should not rely on.
Quoted 8 lines
(We see precisely here that it’s wrong, because the callers are not prepared for the allocation information returned to be associated with a different node than what they passed.)
So my definition is just “If the node has a COW backing file and
block_statusreturns ‘not allocated’, the data will be there. Otherwise, the data is in the current node.” Yes, that means that filters should appear as fully allocated.
You can do that, but then the callers need to learn to do the recursion instead. After all, just copying everything if a filter is in the subtree isn't the desired behaviour.
Kevin
Quoted 40 lines · Kevin Wolf
Am 13.08.2019 um 16:53 hat Max Reitz geschrieben:
Quoted 39 lines · Vladimir Sementsov-Ogievskiy
Quoted 12 lines
Quoted 11 lines · Max Reitz
On 13.08.19 13:51, Kevin Wolf wrote:
[...]
Quoted 1 line
Hm... This is a mess. :-)
Just out of curiosity: Why?
Aren’t there only two things we really need from the
block_statusinfrastructure?Quoted 8 lines
Quoted 6 lines
(1) Whether something is allocated in the given layer of the backing chain,
(2) Whether we know that a given range reads as zeroes.
Do we really need anything else?
qemu-img map?
Which is a debugging tool. So it doesn’t fall under “really” in my book. If removing everything but allocation+zero information would make the code a lot simpler, I think that would be worth it.
Quoted 4 lines
1. We need to fix the bug somehow
2. We need to fix comment about different block-status flags, as it really lacks information of what actually "DATA" means (together with *file). And what finally means "allocated", can you define it precisely?As I wrote in my other mails, I think the problem is that it’s just unexpected that
block_statusautomatically skips through for filters. It shouldn’t, that’s just black magic that the caller should not rely on.(We see precisely here that it’s wrong, because the callers are not prepared for the allocation information returned to be associated with a different node than what they passed.)
Quoted 8 lines
Quoted 4 lines
So my definition is just “If the node has a COW backing file and
block_statusreturns ‘not allocated’, the data will be there. Otherwise, the data is in the current node.” Yes, that means that filters should appear as fully allocated.You can do that, but then the callers need to learn to do the recursion instead. After all, just copying everything if a filter is in the subtree isn't the desired behaviour.
Yes, hence the “deal with filters” series.
Max
Quoted 4 lines · Max Reitz
On 13.08.19 13:51, Kevin Wolf wrote:
[...]
Quoted 8 lines
Quoted 1 line
Hm... This is a mess. :-)
Just out of curiosity: Why?
Aren’t there only two things we really need from the
block_statusinfrastructure?(1) Whether something is allocated in the given layer of the backing chain,
(1)(a) - is it allocated in this layer
(1)(b) - is it allocated in any backing layer
Quoted 4 lines
(2) Whether we know that a given range reads as zeroes.
Do we really need anything else?
qemu-img map needs:
(3) What host-relative offset, if any, corresponds to a given guest-visible offset.
I also need to find time to revisit my proposed patches on block_status alignment - there are some cases where we want to ensure that one layer with large granularity does not pick up mid-granularity changes in status read from a backing layer with smaller granularity.
Signature · 3 lines
Eric Blake, Principal Software Engineer Red Hat, Inc. +1-919-301-3226 Virtualization: qemu.org | libvirt.org
Am 12.08.2019 um 21:46 hat Max Reitz geschrieben:
Quoted 9 lines · Vladimir Sementsov-Ogievskiy
Quoted 6 lines
Hi all!
I'm not sure, is it a bug or a feature, but using qcow2 under raw is broken. It should be either fixed like I propose (by Max's suggestion) or somehow forbidden (just forbid backing-file supporting node to be file child of raw-format node).
I agree, I think only filters should return
BDRV_BLOCK_RAW.
If BDRV_BLOCK_RAW isn't suitable for raw, something went wrong. :-)
But anyway, raw is essentially a filter, at least if you don't use the offset option. And BDRV_BLOCK_RAW shouldn't even depend on an unchanged offset because the .bdrv_co_block_status implementation returns the right offset.
And indeed, you can replace raw with blkdebug and it still fails (the testcase from patch 2 fails, too, but it's obvious enough this way):
$ ./qemu-img map --output=json --image-opts driver=qcow2,file.driver=file,file.filename=/tmp/test.qcow2
[{ "start": 0, "length": 1048576, "depth": 1, "zero": true, "data": false},
{ "start": 1048576, "length": 1048576, "depth": 1, "zero": false, "data": true, "offset": 327680},
{ "start": 2097152, "length": 65011712, "depth": 1, "zero": true, "data": false}] $ ./qemu-img map --output=json --image-opts driver=raw,file.driver=qcow2,file.file.driver=file,file.file.filename=/tmp/test.qcow2
[{ "start": 0, "length": 67108864, "depth": 0, "zero": false, "data": false}] $ ./qemu-img map --output=json --image-opts driver=blkdebug,image.driver=qcow2,image.file.driver=file,image.file.filename=/tmp/test.qcow2
[{ "start": 0, "length": 67108864, "depth": 0, "zero": false, "data": false}]After applying your "deal with filters" series, blkdebug actually prints the expected result and passes the iotests case, but raw still doesn't. So you must have fixed something for filters that declare themselves filters, even though that semantics should probably be coupled to BDRV_BLOCK_RAW instead so that the raw format can benefit from it, too.
Kevin
Quoted 4 lines · Kevin Wolf
Am 12.08.2019 um 21:46 hat Max Reitz geschrieben:
Quoted 3 lines · Vladimir Sementsov-Ogievskiy
Quoted 2 lines
Hi all!
Quoted 8 lines
Quoted 6 lines
Quoted 4 lines
I'm not sure, is it a bug or a feature, but using qcow2 under raw is broken. It should be either fixed like I propose (by Max's suggestion) or somehow forbidden (just forbid backing-file supporting node to be file child of raw-format node).
I agree, I think only filters should return
BDRV_BLOCK_RAW.If
BDRV_BLOCK_RAWisn't suitable for raw, something went wrong. :-)
Yes, its introduction.
Quoted 2 lines
But anyway, raw is essentially a filter, at least if you don't use the offset option.
Which is precisely why it isn’t a filter.
Another reason is that it generally appears as a replacement for a format driver. You never insert it into some graph because you want it as a filter. Which is why behaving like a format driver in block_status makes sense, in my opinion.
Quoted 15 lines
And
BDRV_BLOCK_RAWshouldn't even depend on an
unchanged offset because the .bdrv_co_block_status implementation returns the right offset.And indeed, you can replace raw with blkdebug and it still fails (the testcase from patch 2 fails, too, but it's obvious enough this way):
$ ./qemu-img map --output=json --image-opts driver=qcow2,file.driver=file,file.filename=/tmp/test.qcow2 [{ "start": 0, "length": 1048576, "depth": 1, "zero": true, "data": false}, { "start": 1048576, "length": 1048576, "depth": 1, "zero": false, "data": true, "offset": 327680}, { "start": 2097152, "length": 65011712, "depth": 1, "zero": true, "data": false}]$ ./qemu-img map --output=json --image-opts driver=raw,file.driver=qcow2,file.file.driver=file,file.file.filename=/tmp/test.qcow2 [{ "start": 0, "length": 67108864, "depth": 0, "zero": false, "data": false}]
Quoted 7 lines
$ ./qemu-img map --output=json --image-opts driver=blkdebug,image.driver=qcow2,image.file.driver=file,image.file.filename=/tmp/test.qcow2 [{ "start": 0, "length": 67108864, "depth": 0, "zero": false, "data": false}]After applying your "deal with filters" series, blkdebug actually prints the expected result and passes the iotests case, but raw still doesn't. So you must have fixed something for filters that declare themselves filters,
I hope to have fixed many things for filters that declare themselves filters. ;-)
I think the problem is that filters just break backing chains right now.
My series fixes that. (So even if you have a blkdebug node on top of
your qcow2 node, you should realize that the node you really care about is the qcow2 node. If you look at the filter, you won’t see the backing file and will thus interpret unallocated areas the wrong way.)
(The most important problem is that bdrv_is_allocated_above() currently only goes to the backing_bs(). That’s fixed by patch 13, “block: Use CAFs in block status functions”.)
Quoted 2 lines
even though that semantics should probably be coupled to
BDRV_BLOCK_RAWinstead so that the raw format can benefit from it, too.
I think BDRV_BLOCK_RAW should just be dropped. I don’t see its purpose for non-filters now that we have BDRV_BLOCK_RECURSE; and filters should just be handled generically in bdrv_co_block_status().
Alternatively, we can decide that calling block_status on a filter node is a bad idea, because the caller may not be prepared for the fact that block_status will not return information for this node. But that would mean dropping BDRV_BLOCK_RAW, too.
Max