Add support for Hikey960 board
Subsystems (4)
cover Add support for Hikey960 board
Hello,
This patchset adds board support for Hikey960 board from Hisilicon. This board is one of the Consumer Edition boards of the 96Boards family, powered by Kirin960 (HI3660) SoC.
This patchset adds only basic support necessary to boot the linux kernel from SD card using distro_boot mechanism.
Currently there is no proper clock/pmic driver and hence the raw access to the corresponding memory mapped registers are done in board support file to initialize the system. This will be changed by the upcoming patches adding proper subsystem drivers in future.
As of now, the SD controller's clock implementation is having an issue which keeps the SD controller to operate at slow speed. This will be fixed once the proper clock driver for HI3660 lands in u-boot.
Thanks,
Mani
Manivannan Sadhasivam (5):
arm: dts: Import HI3660 devicetree from Linux
arm: dts: Add devicetree for Hikey960 board
board: hisilicon: Add support for Hikey960 board
mmc: Add support for HI3660 SoC reusing hi6220_dw_mmc driver
MAINTAINERS: Add entry for HI3660 SoC
MAINTAINERS | 2 + arch/arm/Kconfig | 13 + arch/arm/dts/Makefile | 1 + arch/arm/dts/hi3660-hikey960-u-boot.dtsi | 10 + arch/arm/dts/hi3660-hikey960.dts | 607 +++++++++++ arch/arm/dts/hi3660.dtsi | 1157 +++++++++++++++++++++ arch/arm/dts/hikey960-pinctrl.dtsi | 1060 +++++++++++++++++++ arch/arm/include/asm/arch-hi3660/hi3660.h | 52 + board/hisilicon/hikey960/Kconfig | 15 + board/hisilicon/hikey960/MAINTAINERS | 6 + board/hisilicon/hikey960/Makefile | 3 + board/hisilicon/hikey960/README | 247 +++++ board/hisilicon/hikey960/hikey960.c | 186 ++++ configs/hikey960_defconfig | 30 + drivers/mmc/hi6220_dw_mmc.c | 29 +- include/configs/hikey960.h | 60 ++ include/dt-bindings/clock/hi3660-clock.h | 214 ++++ 17 files changed, 3689 insertions(+), 3 deletions(-) create mode 100644 arch/arm/dts/hi3660-hikey960-u-boot.dtsi create mode 100644 arch/arm/dts/hi3660-hikey960.dts create mode 100644 arch/arm/dts/hi3660.dtsi create mode 100644 arch/arm/dts/hikey960-pinctrl.dtsi create mode 100644 arch/arm/include/asm/arch-hi3660/hi3660.h create mode 100644 board/hisilicon/hikey960/Kconfig create mode 100644 board/hisilicon/hikey960/MAINTAINERS create mode 100644 board/hisilicon/hikey960/Makefile create mode 100644 board/hisilicon/hikey960/README create mode 100644 board/hisilicon/hikey960/hikey960.c create mode 100644 configs/hikey960_defconfig create mode 100644 include/configs/hikey960.h create mode 100644 include/dt-bindings/clock/hi3660-clock.h
Signature · 1 line
2.17.1
PATCH 1/5 arm: dts: Import HI3660 devicetree from Linux
This commit imports HI3660 SoC devicetree from Linux
--- arch/arm/dts/hi3660.dtsi | 1157 ++++++++++++++++++++++ arch/arm/dts/hikey960-pinctrl.dtsi | 1060 ++++++++++++++++++++ include/dt-bindings/clock/hi3660-clock.h | 214 ++++ 3 files changed, 2431 insertions(+) create mode 100644 arch/arm/dts/hi3660.dtsi create mode 100644 arch/arm/dts/hikey960-pinctrl.dtsi create mode 100644 include/dt-bindings/clock/hi3660-clock.h
arch/arm/dts/hi3660.dtsi new file +1157 -0
@@ -0,0 +1,1157 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Hisilicon Hi3660 SoC + * + * Copyright (C) 2016, Hisilicon Ltd. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/hi3660-clock.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + compatible = "hisilicon,hi3660"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + core2 { + cpu = <&cpu2>; + }; + core3 { + cpu = <&cpu3>; + }; + }; + cluster1 { + core0 { + cpu = <&cpu4>; + }; + core1 { + cpu = <&cpu5>; + }; + core2 { + cpu = <&cpu6>; + }; + core3 { + cpu = <&cpu7>; + }; + }; + }; + + cpu0: cpu at 0 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <592>; + clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>; + operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; + dynamic-power-coefficient = <110>; + }; + + cpu1: cpu at 1 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <592>; + clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>; + operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; + }; + + cpu2: cpu at 2 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x0 0x2>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <592>; + clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>; + operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; + }; + + cpu3: cpu at 3 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x0 0x3>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <592>; + clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>; + operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; + }; + + cpu4: cpu at 100 { + compatible = "arm,cortex-a73"; + device_type = "cpu"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&A73_L2>; + cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>; + capacity-dmips-mhz = <1024>; + clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>; + operating-points-v2 = <&cluster1_opp>; + #cooling-cells = <2>; + dynamic-power-coefficient = <550>; + }; + + cpu5: cpu at 101 { + compatible = "arm,cortex-a73"; + device_type = "cpu"; + reg = <0x0 0x101>; + enable-method = "psci"; + next-level-cache = <&A73_L2>; + cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>; + capacity-dmips-mhz = <1024>; + clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>; + operating-points-v2 = <&cluster1_opp>; + #cooling-cells = <2>; + }; + + cpu6: cpu at 102 { + compatible = "arm,cortex-a73"; + device_type = "cpu"; + reg = <0x0 0x102>; + enable-method = "psci"; + next-level-cache = <&A73_L2>; + cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>; + capacity-dmips-mhz = <1024>; + clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>; + operating-points-v2 = <&cluster1_opp>; + #cooling-cells = <2>; + }; + + cpu7: cpu at 103 { + compatible = "arm,cortex-a73"; + device_type = "cpu"; + reg = <0x0 0x103>; + enable-method = "psci"; + next-level-cache = <&A73_L2>; + cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>; + capacity-dmips-mhz = <1024>; + clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>; + operating-points-v2 = <&cluster1_opp>; + #cooling-cells = <2>; + }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <400>; + exit-latency-us = <650>; + min-residency-us = <1500>; + }; + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x1010000>; + entry-latency-us = <500>; + exit-latency-us = <1600>; + min-residency-us = <3500>; + }; + + + CPU_SLEEP_1: cpu-sleep-1 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <400>; + exit-latency-us = <550>; + min-residency-us = <1500>; + }; + + CLUSTER_SLEEP_1: cluster-sleep-1 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x1010000>; + entry-latency-us = <800>; + exit-latency-us = <2900>; + min-residency-us = <3500>; + }; + }; + + A53_L2: l2-cache0 { + compatible = "cache"; + }; + + A73_L2: l2-cache1 { + compatible = "cache"; + }; + }; + + cluster0_opp: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp00 { + opp-hz = /bits/ 64 <533000000>; + opp-microvolt = <700000>; + clock-latency-ns = <300000>; + }; + + opp01 { + opp-hz = /bits/ 64 <999000000>; + opp-microvolt = <800000>; + clock-latency-ns = <300000>; + }; + + opp02 { + opp-hz = /bits/ 64 <1402000000>; + opp-microvolt = <900000>; + clock-latency-ns = <300000>; + }; + + opp03 { + opp-hz = /bits/ 64 <1709000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <300000>; + }; + + opp04 { + opp-hz = /bits/ 64 <1844000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <300000>; + }; + }; + + cluster1_opp: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp10 { + opp-hz = /bits/ 64 <903000000>; + opp-microvolt = <700000>; + clock-latency-ns = <300000>; + }; + + opp11 { + opp-hz = /bits/ 64 <1421000000>; + opp-microvolt = <800000>; + clock-latency-ns = <300000>; + }; + + opp12 { + opp-hz = /bits/ 64 <1805000000>; + opp-microvolt = <900000>; + clock-latency-ns = <300000>; + }; + + opp13 { + opp-hz = /bits/ 64 <2112000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <300000>; + }; + + opp14 { + opp-hz = /bits/ 64 <2362000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <300000>; + }; + }; + + gic: interrupt-controller at e82b0000 { + compatible = "arm,gic-400"; + reg = <0x0 0xe82b1000 0 0x1000>, /* GICD */ + <0x0 0xe82b2000 0 0x2000>, /* GICC */ + <0x0 0xe82b4000 0 0x2000>, /* GICH */ + <0x0 0xe82b6000 0 0x2000>; /* GICV */ + #address-cells = <0>; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + + a53-pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, + <&cpu1>, + <&cpu2>, + <&cpu3>; + }; + + a73-pmu { + compatible = "arm,cortex-a73-pmu"; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu4>, + <&cpu5>, + <&cpu6>, + <&cpu7>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_LOW)>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + crg_ctrl: crg_ctrl at fff35000 { + compatible = "hisilicon,hi3660-crgctrl", "syscon"; + reg = <0x0 0xfff35000 0x0 0x1000>; + #clock-cells = <1>; + }; + + crg_rst: crg_rst_controller { + compatible = "hisilicon,hi3660-reset"; + #reset-cells = <2>; + hisi,rst-syscon = <&crg_ctrl>; + }; + + + pctrl: pctrl at e8a09000 { + compatible = "hisilicon,hi3660-pctrl", "syscon"; + reg = <0x0 0xe8a09000 0x0 0x2000>; + #clock-cells = <1>; + }; + + pmuctrl: crg_ctrl at fff34000 { + compatible = "hisilicon,hi3660-pmuctrl", "syscon"; + reg = <0x0 0xfff34000 0x0 0x1000>; + #clock-cells = <1>; + }; + + sctrl: sctrl at fff0a000 { + compatible = "hisilicon,hi3660-sctrl", "syscon"; + reg = <0x0 0xfff0a000 0x0 0x1000>; + #clock-cells = <1>; + }; + + iomcu: iomcu at ffd7e000 { + compatible = "hisilicon,hi3660-iomcu", "syscon"; + reg = <0x0 0xffd7e000 0x0 0x1000>; + #clock-cells = <1>; + + }; + + iomcu_rst: reset { + compatible = "hisilicon,hi3660-reset"; + hisi,rst-syscon = <&iomcu>; + #reset-cells = <2>; + }; + + mailbox: mailbox at e896b000 { + compatible = "hisilicon,hi3660-mbox"; + reg = <0x0 0xe896b000 0x0 0x1000>; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <3>; + }; + + stub_clock: stub_clock at e896b500 { + compatible = "hisilicon,hi3660-stub-clk"; + reg = <0x0 0xe896b500 0x0 0x0100>; + #clock-cells = <1>; + mboxes = <&mailbox 13 3 0>; + }; + + dual_timer0: timer at fff14000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x0 0xfff14000 0x0 0x1000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_OSC32K>, + <&crg_ctrl HI3660_OSC32K>, + <&crg_ctrl HI3660_OSC32K>; + clock-names = "timer1", "timer2", "apb_pclk"; + }; + + i2c0: i2c at ffd71000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0xffd71000 0x0 0x1000>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + clocks = <&crg_ctrl HI3660_CLK_GATE_I2C0>; + resets = <&iomcu_rst 0x20 3>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>; + status = "disabled"; + }; + + i2c1: i2c at ffd72000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0xffd72000 0x0 0x1000>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + clocks = <&crg_ctrl HI3660_CLK_GATE_I2C1>; + resets = <&iomcu_rst 0x20 4>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>; + status = "disabled"; + }; + + i2c3: i2c at fdf0c000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0xfdf0c000 0x0 0x1000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + clocks = <&crg_ctrl HI3660_CLK_GATE_I2C3>; + resets = <&crg_rst 0x78 7>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pmx_func &i2c3_cfg_func>; + status = "disabled"; + }; + + i2c7: i2c at fdf0b000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0xfdf0b000 0x0 0x1000>; + interrupts = <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + clocks = <&crg_ctrl HI3660_CLK_GATE_I2C7>; + resets = <&crg_rst 0x60 14>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c7_pmx_func &i2c7_cfg_func>; + status = "disabled"; + }; + + uart0: serial at fdf02000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfdf02000 0x0 0x1000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_CLK_MUX_UART0>, + <&crg_ctrl HI3660_PCLK>; + clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>; + status = "disabled"; + }; + + uart1: serial at fdf00000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfdf00000 0x0 0x1000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + dma-names = "rx", "tx"; + dmas = <&dma0 2 &dma0 3>; + clocks = <&crg_ctrl HI3660_CLK_GATE_UART1>, + <&crg_ctrl HI3660_CLK_GATE_UART1>; + clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>; + status = "disabled"; + }; + + uart2: serial at fdf03000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfdf03000 0x0 0x1000>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + dma-names = "rx", "tx"; + dmas = <&dma0 4 &dma0 5>; + clocks = <&crg_ctrl HI3660_CLK_GATE_UART2>, + <&crg_ctrl HI3660_PCLK>; + clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>; + status = "disabled"; + }; + + uart3: serial at ffd74000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xffd74000 0x0 0x1000>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_FACTOR_UART3>, + <&crg_ctrl HI3660_PCLK>; + clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>; + status = "disabled"; + }; + + uart4: serial at fdf01000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfdf01000 0x0 0x1000>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + dma-names = "rx", "tx"; + dmas = <&dma0 6 &dma0 7>; + clocks = <&crg_ctrl HI3660_CLK_GATE_UART4>, + <&crg_ctrl HI3660_CLK_GATE_UART4>; + clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>; + status = "disabled"; + }; + + uart5: serial at fdf05000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfdf05000 0x0 0x1000>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + dma-names = "rx", "tx"; + dmas = <&dma0 8 &dma0 9>; + clocks = <&crg_ctrl HI3660_CLK_GATE_UART5>, + <&crg_ctrl HI3660_CLK_GATE_UART5>; + clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart5_pmx_func &uart5_cfg_func>; + status = "disabled"; + }; + + uart6: serial at fff32000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfff32000 0x0 0x1000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + clock = <19200000>; + clocks = <&crg_ctrl HI3660_CLK_UART6>, + <&crg_ctrl HI3660_PCLK>; + clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart6_pmx_func &uart6_cfg_func>; + status = "disabled"; + }; + + dma0: dma at fdf30000 { + compatible = "hisilicon,k3-dma-1.0"; + reg = <0x0 0xfdf30000 0x0 0x1000>; + #dma-cells = <1>; + dma-channels = <16>; + dma-requests = <32>; + dma-channel-mask = <0xfffe>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_CLK_GATE_DMAC>; + dma-no-cci; + dma-type = "hi3660_dma"; + }; + + asp_dmac: dma-controller at e804b000 { + compatible = "hisilicon,hisi-pcm-asp-dma-1.0"; + reg = <0x0 0xe804b000 0x0 0x1000>; + #dma-cells = <1>; + dma-channels = <16>; + dma-requests = <32>; + interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "asp_dma_irq"; + }; + + rtc0: rtc at fff04000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0x0 0Xfff04000 0x0 0x1000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + }; + + gpio0: gpio at e8a0b000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a0b000 0 0x1000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 1 0 7>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO0>; + clock-names = "apb_pclk"; + }; + + gpio1: gpio at e8a0c000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a0c000 0 0x1000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 1 7 7>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO1>; + clock-names = "apb_pclk"; + }; + + gpio2: gpio at e8a0d000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a0d000 0 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 14 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO2>; + clock-names = "apb_pclk"; + }; + + gpio3: gpio at e8a0e000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a0e000 0 0x1000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 22 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO3>; + clock-names = "apb_pclk"; + }; + + gpio4: gpio at e8a0f000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a0f000 0 0x1000>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 30 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO4>; + clock-names = "apb_pclk"; + }; + + gpio5: gpio at e8a10000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a10000 0 0x1000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 38 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO5>; + clock-names = "apb_pclk"; + }; + + gpio6: gpio at e8a11000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a11000 0 0x1000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 46 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO6>; + clock-names = "apb_pclk"; + }; + + gpio7: gpio at e8a12000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a12000 0 0x1000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 54 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO7>; + clock-names = "apb_pclk"; + }; + + gpio8: gpio at e8a13000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a13000 0 0x1000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 62 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO8>; + clock-names = "apb_pclk"; + }; + + gpio9: gpio at e8a14000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a14000 0 0x1000>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 70 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO9>; + clock-names = "apb_pclk"; + }; + + gpio10: gpio at e8a15000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a15000 0 0x1000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 78 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO10>; + clock-names = "apb_pclk"; + }; + + gpio11: gpio at e8a16000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a16000 0 0x1000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 86 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO11>; + clock-names = "apb_pclk"; + }; + + gpio12: gpio at e8a17000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a17000 0 0x1000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 94 3 &pmx0 7 101 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO12>; + clock-names = "apb_pclk"; + }; + + gpio13: gpio at e8a18000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a18000 0 0x1000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 102 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO13>; + clock-names = "apb_pclk"; + }; + + gpio14: gpio at e8a19000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a19000 0 0x1000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 110 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO14>; + clock-names = "apb_pclk"; + }; + + gpio15: gpio at e8a1a000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a1a000 0 0x1000>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 118 6>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO15>; + clock-names = "apb_pclk"; + }; + + gpio16: gpio at e8a1b000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a1b000 0 0x1000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO16>; + clock-names = "apb_pclk"; + }; + + gpio17: gpio at e8a1c000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a1c000 0 0x1000>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO17>; + clock-names = "apb_pclk"; + }; + + gpio18: gpio at ff3b4000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xff3b4000 0 0x1000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx2 0 0 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO18>; + clock-names = "apb_pclk"; + }; + + gpio19: gpio at ff3b5000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xff3b5000 0 0x1000>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx2 0 8 4>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO19>; + clock-names = "apb_pclk"; + }; + + gpio20: gpio at e8a1f000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a1f000 0 0x1000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx1 0 0 6>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO20>; + clock-names = "apb_pclk"; + }; + + gpio21: gpio at e8a20000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a20000 0 0x1000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&pmx3 0 0 6>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO21>; + clock-names = "apb_pclk"; + }; + + gpio22: gpio at fff0b000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xfff0b000 0 0x1000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + /* GPIO176 */ + gpio-ranges = <&pmx4 2 0 6>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3660_PCLK_AO_GPIO0>; + clock-names = "apb_pclk"; + }; + + gpio23: gpio at fff0c000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xfff0c000 0 0x1000>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + /* GPIO184 */ + gpio-ranges = <&pmx4 0 6 7>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3660_PCLK_AO_GPIO1>; + clock-names = "apb_pclk"; + }; + + gpio24: gpio at fff0d000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xfff0d000 0 0x1000>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + /* GPIO192 */ + gpio-ranges = <&pmx4 0 13 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3660_PCLK_AO_GPIO2>; + clock-names = "apb_pclk"; + }; + + gpio25: gpio at fff0e000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xfff0e000 0 0x1000>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + /* GPIO200 */ + gpio-ranges = <&pmx4 0 21 4 &pmx4 5 25 3>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3660_PCLK_AO_GPIO3>; + clock-names = "apb_pclk"; + }; + + gpio26: gpio at fff0f000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xfff0f000 0 0x1000>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + /* GPIO208 */ + gpio-ranges = <&pmx4 0 28 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3660_PCLK_AO_GPIO4>; + clock-names = "apb_pclk"; + }; + + gpio27: gpio at fff10000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xfff10000 0 0x1000>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + /* GPIO216 */ + gpio-ranges = <&pmx4 0 36 6>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3660_PCLK_AO_GPIO5>; + clock-names = "apb_pclk"; + }; + + gpio28: gpio at fff1d000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xfff1d000 0 0x1000>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3660_PCLK_AO_GPIO6>; + clock-names = "apb_pclk"; + }; + + spi2: spi at ffd68000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x0 0xffd68000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_CLK_GATE_SPI2>; + clock-names = "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pmx_func>; + num-cs = <1>; + cs-gpios = <&gpio27 2 0>; + status = "disabled"; + }; + + spi3: spi at ff3b3000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x0 0xff3b3000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_CLK_GATE_SPI3>; + clock-names = "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&spi3_pmx_func>; + num-cs = <1>; + cs-gpios = <&gpio18 5 0>; + status = "disabled"; + }; + + pcie at f4000000 { + compatible = "hisilicon,kirin960-pcie"; + reg = <0x0 0xf4000000 0x0 0x1000>, + <0x0 0xff3fe000 0x0 0x1000>, + <0x0 0xf3f20000 0x0 0x40000>, + <0x0 0xf5000000 0x0 0x2000>; + reg-names = "dbi", "apb", "phy", "config"; + bus-range = <0x0 0x1>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x02000000 0x0 0x00000000 + 0x0 0xf6000000 + 0x0 0x02000000>; + num-lanes = <1>; + #interrupt-cells = <1>; + interrupts = <0 283 4>; + interrupt-names = "msi"; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0x0 0 0 1 + &gic GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <0x0 0 0 2 + &gic GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <0x0 0 0 3 + &gic GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <0x0 0 0 4 + &gic GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_PCIEPHY_REF>, + <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>, + <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>, + <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>, + <&crg_ctrl HI3660_ACLK_GATE_PCIE>; + clock-names = "pcie_phy_ref", "pcie_aux", + "pcie_apb_phy", "pcie_apb_sys", + "pcie_aclk"; + reset-gpios = <&gpio11 1 0 >; + }; + + /* UFS */ + ufs: ufs at ff3b0000 { + compatible = "hisilicon,hi3660-ufs", "jedec,ufs-1.1"; + /* 0: HCI standard */ + /* 1: UFS SYS CTRL */ + reg = <0x0 0xff3b0000 0x0 0x1000>, + <0x0 0xff3b1000 0x0 0x1000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_CLK_GATE_UFSIO_REF>, + <&crg_ctrl HI3660_CLK_GATE_UFSPHY_CFG>; + clock-names = "ref_clk", "phy_clk"; + freq-table-hz = <0 0>, <0 0>; + /* offset: 0x84; bit: 12 */ + resets = <&crg_rst 0x84 12>; + reset-names = "rst"; + }; + + /* SD */ + dwmmc1: dwmmc1 at ff37f000 { + compatible = "hisilicon,hi3660-dw-mshc"; + reg = <0x0 0xff37f000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_CLK_GATE_SD>, + <&crg_ctrl HI3660_HCLK_GATE_SD>; + clock-names = "ciu", "biu"; + clock-frequency = <3200000>; + resets = <&crg_rst 0x94 18>; + reset-names = "reset"; + hisilicon,peripheral-syscon = <&sctrl>; + card-detect-delay = <200>; + status = "disabled"; + }; + + /* SDIO */ + dwmmc2: dwmmc2 at ff3ff000 { + compatible = "hisilicon,hi3660-dw-mshc"; + reg = <0x0 0xff3ff000 0x0 0x1000>; + #address-cells = <0x1>; + #size-cells = <0x0>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_CLK_GATE_SDIO0>, + <&crg_ctrl HI3660_HCLK_GATE_SDIO0>; + clock-names = "ciu", "biu"; + resets = <&crg_rst 0x94 20>; + reset-names = "reset"; + card-detect-delay = <200>; + status = "disabled"; + }; + + watchdog0: watchdog at e8a06000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xe8a06000 0x0 0x1000>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_OSC32K>; + clock-names = "apb_pclk"; + }; + + watchdog1: watchdog at e8a07000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xe8a07000 0x0 0x1000>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_OSC32K>; + clock-names = "apb_pclk"; + }; + + tsensor: tsensor at fff30000 { + compatible = "hisilicon,hi3660-tsensor"; + reg = <0x0 0xfff30000 0x0 0x1000>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + #thermal-sensor-cells = <1>; + }; + + thermal-zones { + + cls0: cls0 { + polling-delay = <1000>; + polling-delay-passive = <100>; + sustainable-power = <4500>; + + /* sensor ID */ + thermal-sensors = <&tsensor 1>; + + trips { + threshold: trip-point at 0 { + temperature = <65000>; + hysteresis = <1000>; + type = "passive"; + }; + + target: trip-point at 1 { + temperature = <75000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + + cooling-maps { + map0 { + trip = <&target>; + contribution = <1024>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&target>; + contribution = <512>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + }; +};
arch/arm/dts/hikey960-pinctrl.dtsi new file +1060 -0
1,060 lines not on this page · raw message
include/dt-bindings/clock/hi3660-clock.h new file +214 -0
214 lines not on this page · raw message
Signature · 1 line
2.17.1
PATCH 1/5 arm: dts: Import HI3660 devicetree from Linux
Quoted 3 lines · Manivannan Sadhasivam
This commit imports HI3660 SoC devicetree from Linux
Signed-off-by Manivannan Sadhasivam <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190813/4efdfabc/attachment.sig>
PATCH 2/5 arm: dts: Add devicetree for Hikey960 board
In reply to Manivannan SadhasivamThis commit adds devicetree for Hikey960 board. Most of the contents are copied from Linux kernel with some modifications for u-boot. To be more precise, SD card's speed related properties are removed due to a bug in u-boot clock implementation. Hence forcing the SD controller to work in standard speed.
--- arch/arm/dts/Makefile | 1 + arch/arm/dts/hi3660-hikey960-u-boot.dtsi | 10 + arch/arm/dts/hi3660-hikey960.dts | 607 +++++++++++++++++++++++ 3 files changed, 618 insertions(+) create mode 100644 arch/arm/dts/hi3660-hikey960-u-boot.dtsi create mode 100644 arch/arm/dts/hi3660-hikey960.dts
arch/arm/dts/Makefile +1 -0
@@ -15,6 +15,7 @@ dtb-$(CONFIG_EXYNOS4) += exynos4210-origen.dtb \ exynos4412-odroid.dtb dtb-$(CONFIG_TARGET_HIKEY) += hi6220-hikey.dtb +dtb-$(CONFIG_TARGET_HIKEY960) += hi3660-hikey960.dtb dtb-$(CONFIG_TARGET_POPLAR) += hi3798cv200-poplar.dtb
arch/arm/dts/hi3660-hikey960-u-boot.dtsi new file +10 -0
@@ -0,0 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * U-Boot additions + * + * Copyright (c) 2019 Linaro Ltd. + */ + +&dwmmc1 { + u-boot,dm-pre-reloc; +};
arch/arm/dts/hi3660-hikey960.dts new file +607 -0
607 lines not on this page · raw message
Signature · 1 line
2.17.1
PATCH 2/5 arm: dts: Add devicetree for Hikey960 board
Quoted 7 lines · Manivannan Sadhasivam
This commit adds devicetree for Hikey960 board. Most of the contents are copied from Linux kernel with some modifications for u-boot. To be more precise, SD card's speed related properties are removed due to a bug in u-boot clock implementation. Hence forcing the SD controller to work in standard speed.
Signed-off-by Manivannan Sadhasivam <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190813/7371d95e/attachment.sig>
PATCH 3/5 board: hisilicon: Add support for Hikey960 board
In reply to Manivannan SadhasivamThis commit adds board support for Hikey960 board from Hisilicon. This board is one of the Consumer Edition boards of the 96Boards family powered by Kirin960 SoC.
More information about this board can be found in 96Boards website:
https://www.96boards.org/product/hikey960/
The initial supported/tested devices include:
- Debug serial
- SD
With these support, it's good enough for loading Linux Kernel from SD.
--- arch/arm/Kconfig | 13 ++ arch/arm/include/asm/arch-hi3660/hi3660.h | 52 +++++ board/hisilicon/hikey960/Kconfig | 15 ++ board/hisilicon/hikey960/MAINTAINERS | 6 + board/hisilicon/hikey960/Makefile | 3 + board/hisilicon/hikey960/README | 247 ++++++++++++++++++++++ board/hisilicon/hikey960/hikey960.c | 186 ++++++++++++++++ configs/hikey960_defconfig | 30 +++ include/configs/hikey960.h | 60 ++++++ 9 files changed, 612 insertions(+) create mode 100644 arch/arm/include/asm/arch-hi3660/hi3660.h create mode 100644 board/hisilicon/hikey960/Kconfig create mode 100644 board/hisilicon/hikey960/MAINTAINERS create mode 100644 board/hisilicon/hikey960/Makefile create mode 100644 board/hisilicon/hikey960/README create mode 100644 board/hisilicon/hikey960/hikey960.c create mode 100644 configs/hikey960_defconfig create mode 100644 include/configs/hikey960.h
arch/arm/Kconfig +13 -0
@@ -1205,6 +1205,18 @@ config TARGET_HIKEY Support for HiKey 96boards platform. It features a HI6220 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. +config TARGET_HIKEY960 + bool "Support HiKey960 96boards Consumer Edition Platform" + select ARM64 + select DM + select DM_SERIAL + select OF_CONTROL + select PL01X_SERIAL + imply CMD_DM + help + Support for HiKey960 96boards platform. It features a HI3660 + SoC, with 4xA73 CPU, 4xA53 CPU, MALI-G71 GPU, and 3GB RAM. + config TARGET_POPLAR bool "Support Poplar 96boards Enterprise Edition Platform" select ARM64
@@ -1760,6 +1772,7 @@ source "board/grinn/chiliboard/Kconfig" source "board/gumstix/pepper/Kconfig" source "board/h2200/Kconfig" source "board/hisilicon/hikey/Kconfig" +source "board/hisilicon/hikey960/Kconfig" source "board/hisilicon/poplar/Kconfig" source "board/isee/igep003x/Kconfig" source "board/phytec/pcm051/Kconfig"
arch/arm/include/asm/arch-hi3660/hi3660.h new file +52 -0
52 lines not on this page · raw message
board/hisilicon/hikey960/Kconfig new file +15 -0
@@ -0,0 +1,15 @@ +if TARGET_HIKEY960 + +config SYS_BOARD + default "hikey960" + +config SYS_VENDOR + default "hisilicon" + +config SYS_SOC + default "hi3660" + +config SYS_CONFIG_NAME + default "hikey960" + +endif
board/hisilicon/hikey960/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +HIKEY960 BOARD +M: Manivannan Sadhasivam <[email protected]> +S: Maintained +F: board/hisilicon/hikey960 +F: include/configs/hikey960.h +F: configs/hikey960_defconfig
board/hisilicon/hikey960/Makefile new file +3 -0
@@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0+ + +obj-y := hikey960.o
board/hisilicon/hikey960/README new file +247 -0
247 lines not on this page · raw message
board/hisilicon/hikey960/hikey960.c new file +186 -0
186 lines not on this page · raw message
configs/hikey960_defconfig new file +30 -0
@@ -0,0 +1,30 @@ +CONFIG_ARM=y +CONFIG_TARGET_HIKEY960=y +CONFIG_SYS_TEXT_BASE=0x1ac98000 +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_IDENT_STRING="\nHikey960" +# CONFIG_DISPLAY_CPUINFO is not set +# CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_DISTRO_DEFAULTS=y +CONFIG_BOOTDELAY=3 +CONFIG_SYS_PROMPT="U-Boot => " +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyAMA6,115200n8 root=/dev/mmcblk0p2 rw" +CONFIG_MISC_INIT_R=y +CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_DEFAULT_DEVICE_TREE="hi3660-hikey960" +CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_CMD_MMC=y +CONFIG_CMD_GPT=y +CONFIG_CMD_MD5SUM=y +CONFIG_CMD_MEMINFO=y +CONFIG_ENV_IS_IN_EXT4=y +CONFIG_ENV_EXT4_INTERFACE="mmc" +CONFIG_ENV_EXT4_DEVICE_AND_PART="0:2" +CONFIG_ENV_EXT4_FILE="/uboot.env" +CONFIG_DM_MMC=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_K3=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_SINGLE=y
include/configs/hikey960.h new file +60 -0
60 lines not on this page · raw message
Signature · 1 line
2.17.1
PATCH 3/5 board: hisilicon: Add support for Hikey960 board
Quoted 7 lines · Manivannan Sadhasivam
This commit adds board support for Hikey960 board from Hisilicon. This board is one of the Consumer Edition boards of the 96Boards family powered by Kirin960 SoC.
More information about this board can be found in 96Boards website:
https://www.96boards.org/product/hikey960/
Quoted 7 lines
The initial supported/tested devices include:
- Debug serial
- SDWith these support, it's good enough for loading Linux Kernel from SD.
Signed-off-by Manivannan Sadhasivam <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190813/69077172/attachment.sig>
PATCH 4/5 mmc: Add support for HI3660 SoC reusing hi6220_dw_mmc driver
In reply to Manivannan SadhasivamThis commit adds MMC driver support for HI3660 SoC reusing hi6220_dw_mmc driver. Since HI3660 operates at different clock rate and uses fifo mode now, let's introduce the platform data and utilize it for different SoCs supported by this driver.
--- drivers/mmc/hi6220_dw_mmc.c | 29 ++++++++++++++++++++++++++--- 1 file changed, 26 insertions(+), 3 deletions(-)
drivers/mmc/hi6220_dw_mmc.c +26 -3
@@ -22,6 +22,11 @@ struct hi6220_dwmmc_priv_data {struct dwmci_host host; }; +struct hisi_mmc_data { +unsigned int clock; +bool use_fifo; +}; +static int hi6220_dwmmc_ofdata_to_platdata (struct udevice *dev) {struct hi6220_dwmmc_priv_data *priv =dev_get_priv (dev);
@@ -49,13 +54,17 @@ static int hi6220_dwmmc_probe(struct udevice *dev)struct mmc_uclass_priv *upriv =dev_get_uclass_priv (dev);struct hi6220_dwmmc_priv_data *priv =dev_get_priv (dev);struct dwmci_host *host = &priv->host; +struct hisi_mmc_data *mmc_data; + + mmc_data = (struct hisi_mmc_data *)dev_get_driver_data (dev);/* Use default bus speed due to absence of clk driver */ - host->bus_hz =50000000 ; + host->bus_hz = mmc_data->clock;dwmci_setup_cfg (&plat->cfg, host, host->bus_hz,400000 ); host->mmc = &plat->mmc; + host->fifo_mode = mmc_data->use_fifo; host->mmc->priv = &priv->host; upriv->mmc = host->mmc; host->mmc->dev = dev;
@@ -75,9 +84,23 @@ static int hi6220_dwmmc_bind(struct udevice *dev)return 0 ; } +static const struct hisi_mmc_data hi3660_mmc_data = { + .clock =3200000 , + .use_fifo = true, +}; + +static const struct hisi_mmc_data hi6220_mmc_data = { + .clock =50000000 , + .use_fifo = false, +}; +static const struct udevice_id hi6220_dwmmc_ids[] = { - { .compatible ="hisilicon,hi6220-dw-mshc" }, - { .compatible ="hisilicon,hi3798cv200-dw-mshc" }, + { .compatible ="hisilicon,hi6220-dw-mshc" , + .data = (ulong)&hi6220_mmc_data }, + { .compatible ="hisilicon,hi3798cv200-dw-mshc" , + .data = (ulong)&hi6220_mmc_data }, + { .compatible ="hisilicon,hi3660-dw-mshc" , + .data = (ulong)&hi3660_mmc_data }, { } };
Signature · 1 line
2.17.1
PATCH 4/5 mmc: Add support for HI3660 SoC reusing hi6220_dw_mmc driver
Quoted 6 lines · Manivannan Sadhasivam
This commit adds MMC driver support for HI3660 SoC reusing
hi6220_dw_mmcdriver. Since HI3660 operates at different clock rate and uses fifo mode now, let's introduce the platform data and utilize it for different SoCs supported by this driver.Signed-off-by Manivannan Sadhasivam <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190813/bea3baa3/attachment.sig>
PATCH 5/5 MAINTAINERS: Add entry for HI3660 SoC
In reply to Manivannan SadhasivamAdd MAINTAINERS entry for HI3660 SoC by adding the arch includes. While doing so, adding myself as the co-maintainer for HISILICON SoCs since I'm planning to maintain HI3660 SoC separately and considering doing improvements to the existing HiSilicon SoC architecture.
--- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+)
MAINTAINERS +2 -0
@@ -167,9 +167,11 @@ F: board/freescale/*mx*/ ARM HISILICON M: Peter Griffin <[email protected]> +M: Manivannan Sadhasivam <[email protected]> S: Maintained F: arch/arm/cpu/armv8/hisilicon F: arch/arm/include/asm/arch-hi6220/ +F: arch/arm/include/asm/arch-hi3660/ ARM MARVELL KIRKWOOD ARMADA-XP ARMADA-38X ARMADA-37XX ARMADA-7K/8K M: Stefan Roese <[email protected]>
Signature · 1 line
2.17.1
PATCH 5/5 MAINTAINERS: Add entry for HI3660 SoC
Quoted 6 lines · Manivannan Sadhasivam
Add
MAINTAINERSentry for HI3660 SoC by adding the arch includes. While doing so, adding myself as the co-maintainer for HISILICON SoCs since I'm planning to maintain HI3660 SoC separately and considering doing improvements to the existing HiSilicon SoC architecture.Signed-off-by Manivannan Sadhasivam <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190813/6f64d514/attachment.sig>