bus: ti-sysc: sysc_check_one_child(): Change return type to void
PATCH v2 1/1 bus: ti-sysc: sysc_check_one_child(): Change return type to void
Change return type of function sysc_check_one_child() from int to void as it always returns 0. Accordingly, at its callsite, delete the variable that previously stored the return value.
---
Changes in v2:
- Remove error variable entirely.
- Change return type of sysc_check_one_child().
drivers/bus/ti-sysc.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-)
drivers/bus/ti-sysc.c +3 -6
@@ -615,8 +615,8 @@ static void sysc_check_quirk_stdout(struct sysc *ddata,* node but children have "ti,hwmods". These belong to the interconnect * target node and are managed by this driver. */ -static int sysc_check_one_child (struct sysc *ddata, -struct device_node *np) +static void sysc_check_one_child (struct sysc *ddata, +struct device_node *np) {const char *name;
@@ -633,12 +633,9 @@ static int sysc_check_one_child(struct sysc *ddata,static int sysc_check_children (struct sysc *ddata) {struct device_node *child; -int error;for_each_child_of_node (ddata->dev->of_node, child) { - error =sysc_check_one_child (ddata, child); -if (error) -return error; +sysc_check_one_child (ddata, child); }return 0 ;
Signature · 1 line
2.19.1
Quoted 18 lines · Nishka Dasgupta
Change return type of function
sysc_check_one_child()from int to void as it always returns 0. Accordingly, at its callsite, delete the variable that previously stored the return value.Signed-off-by Nishka Dasgupta <[email protected]>---
Changes in v2:
- Remove error variable entirely.
- Change return type ofsysc_check_one_child().drivers/bus/ti-sysc.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-)drivers/bus/ti-sysc.c +0
-0
drivers/bus/ti-sysc.c static void sysc_check_quirk_stdout(struct sysc *ddata, · line 622
Quoted 10 lines
drivers/bus/ti-sysc.c +2
-2@@ -615,8 +615,8 @@ static void sysc_check_quirk_stdout(struct sysc *ddata,* node but children have "ti,hwmods". These belong to the interconnect * target node and are managed by this driver. */ -static int sysc_check_one_child (struct sysc *ddata, -struct device_node *np) +static void sysc_check_one_child (struct sysc *ddata, +struct device_node *np) {const char *name;
You didn't remove the "return 0" at end of this function. Doesn't it complain during build?
drivers/bus/ti-sysc.c static int sysc_check_one_child(struct sysc *ddata, · line 634
Quoted 3 lines
drivers/bus/ti-sysc.c +0
-0@@ -633,12 +633,9 @@ static int sysc_check_one_child(struct sysc *ddata,static int sysc_check_children (struct sysc *ddata) {
This could return void as well.
drivers/bus/ti-sysc.c static int sysc_check_one_child(struct sysc *ddata, · line 639
Quoted 9 lines
drivers/bus/ti-sysc.c +1
-4struct device_node *child; -int error;for_each_child_of_node (ddata->dev->of_node, child) { - error =sysc_check_one_child (ddata, child); -if (error) -return error; +sysc_check_one_child (ddata, child); }
You don't need the braces { }.
Please run ./scripts/checkpatch.pl --strict on your patch and fix any issues.
drivers/bus/ti-sysc.c static int sysc_check_one_child(struct sysc *ddata, · line 641
Quoted 3 lines
drivers/bus/ti-sysc.c +0
-0return 0 ;
return not required.
You will also need to fix all instances using sysc_check_children()
cheers,
-roger
Signature · 2 lines
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
Quoted 35 lines · Roger Quadros
Quoted 18 lines · Nishka Dasgupta
Change return type of function
sysc_check_one_child()from int to void as it always returns 0. Accordingly, at its callsite, delete the variable that previously stored the return value.Signed-off-by Nishka Dasgupta <[email protected]>---
Changes in v2:
- Remove error variable entirely.
- Change return type ofsysc_check_one_child().drivers/bus/ti-sysc.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-)drivers/bus/ti-sysc.c +0
-0drivers/bus/ti-sysc.c static void sysc_check_quirk_stdout(struct sysc *ddata, · line 622
Quoted 10 lines
drivers/bus/ti-sysc.c +2
-2@@ -615,8 +615,8 @@ static void sysc_check_quirk_stdout(struct sysc *ddata,* node but children have "ti,hwmods". These belong to the interconnect * target node and are managed by this driver. */ -static int sysc_check_one_child (struct sysc *ddata, -struct device_node *np) +static void sysc_check_one_child (struct sysc *ddata, +struct device_node *np) {const char *name;You didn't remove the "return 0" at end of this function. Doesn't it complain during build?
Quoted 5 lines
drivers/bus/ti-sysc.c static int sysc_check_one_child(struct sysc *ddata, · line 634
Quoted 3 lines
drivers/bus/ti-sysc.c +0
-0@@ -633,12 +633,9 @@ static int sysc_check_one_child(struct sysc *ddata,static int sysc_check_children (struct sysc *ddata) {This could return void as well.
Okay. Sorry for the errors; I'll fix-up and resend.
However, while building it, I'm running into a compilation problem:
on line 764 (function sysc_ioremap) there is apparently an "undeclared variable", "SZ_1K". Is it a problem with the architecture? What arch should I compile it with?
Thanking you,
Nishka
Quoted 27 lines
drivers/bus/ti-sysc.c static int sysc_check_one_child(struct sysc *ddata, · line 639
Quoted 10 lines
drivers/bus/ti-sysc.c +1
-4struct device_node *child; -int error;for_each_child_of_node (ddata->dev->of_node, child) { - error =sysc_check_one_child (ddata, child); -if (error) -return error; +sysc_check_one_child (ddata, child); }You don't need the braces { }.
Please run
./scripts/checkpatch.pl--strict on your patch and fix any issues.drivers/bus/ti-sysc.c static int sysc_check_one_child(struct sysc *ddata, · line 641
Quoted 3 lines
drivers/bus/ti-sysc.c +0
-0return 0 ;return not required.
You will also need to fix all instances using
sysc_check_children()cheers,
-roger
Quoted 42 lines · Nishka Dasgupta
Quoted 35 lines · Roger Quadros
Quoted 27 lines · Nishka Dasgupta
Change return type of function
sysc_check_one_child()from int to void as it always returns 0. Accordingly, at its callsite, delete the variable that previously stored the return value.Signed-off-by Nishka Dasgupta <[email protected]>---
Changes in v2:
- Remove error variable entirely.
- Change return type ofsysc_check_one_child().
drivers/bus/ti-sysc.c| 9 +++------1 file changed, 3 insertions(+), 6 deletions(-)drivers/bus/ti-sysc.c +2
-2@@ -615,8 +615,8 @@ static void sysc_check_quirk_stdout(struct sysc *ddata,* node but children have "ti,hwmods". These belong to the interconnect * target node and are managed by this driver. */ -static int sysc_check_one_child (struct sysc *ddata, - struct device_node *np) +static void sysc_check_one_child (struct sysc *ddata, + struct device_node *np) { const char *name;Quoted 1 line
You didn't remove the "return 0" at end of this function. Doesn't it complain during build?
Quoted 5 lines
drivers/bus/ti-sysc.c static int sysc_check_one_child(struct sysc *ddata, · line 634
Quoted 3 lines
drivers/bus/ti-sysc.c +0
-0@@ -633,12 +633,9 @@ static int sysc_check_one_child(struct sysc *ddata, static int sysc_check_children(struct sysc *ddata) {This could return void as well.
Quoted 4 lines
Okay. Sorry for the errors; I'll fix-up and resend.
However, while building it, I'm running into a compilation problem:
on line 764 (functionsysc_ioremap) there is apparently an "undeclared variable", "SZ_1K". Is it a problem with the architecture? What arch should I compile it with?
make ARCH=arm omap2plus_defconfig
make -j4 ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf-
Quoted 26 lines
Thanking you,
NishkaQuoted 22 lines
drivers/bus/ti-sysc.c static int sysc_check_one_child(struct sysc *ddata, · line 639
Quoted 9 lines
drivers/bus/ti-sysc.c +1
-4struct device_node *child; - int error; for_each_child_of_node(ddata->dev->of_node, child) { - error = sysc_check_one_child(ddata, child); - if (error) - return error; + sysc_check_one_child(ddata, child); }You don't need the braces { }.
Please run
./scripts/checkpatch.pl--strict on your patch and fix any issues.drivers/bus/ti-sysc.c static int sysc_check_one_child(struct sysc *ddata, · line 640
Quoted 2 lines
drivers/bus/ti-sysc.c +0
-0return 0;return not required.
You will also need to fix all instances using
sysc_check_children()
cheers,
-roger
Signature · 2 lines
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
PATCH v3 1/2 bus: ti-sysc: sysc_check_one_child(): Change return type to void
In reply to Nishka DasguptaChange return type of function sysc_check_one_child() from int to void as it always returns 0. Remove the now-unnecessary return statement as well. Accordingly, at its call site, delete the error variable that previously stored the return value.
---
Changes in v3:
- Remove return statement in sysc_check_one_child().
- Remove braces at call site.
Changes in v2:
- Remove error variable entirely.
- Change return type of sysc_check_one_child().
drivers/bus/ti-sysc.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-)
drivers/bus/ti-sysc.c +4 -10
@@ -615,8 +615,8 @@ static void sysc_check_quirk_stdout(struct sysc *ddata,* node but children have "ti,hwmods". These belong to the interconnect * target node and are managed by this driver. */ -static int sysc_check_one_child (struct sysc *ddata, -struct device_node *np) +static void sysc_check_one_child (struct sysc *ddata, +struct device_node *np) {const char *name;
@@ -626,20 +626,14 @@ static int sysc_check_one_child(struct sysc *ddata,sysc_check_quirk_stdout (ddata, np);sysc_parse_dts_quirks (ddata, np, true); - -return 0 ; }static int sysc_check_children (struct sysc *ddata) {struct device_node *child; -int error; -for_each_child_of_node (ddata->dev->of_node, child) { - error =sysc_check_one_child (ddata, child); -if (error) -return error; - } +for_each_child_of_node (ddata->dev->of_node, child) +sysc_check_one_child (ddata, child);return 0 ; }
Signature · 1 line
2.19.1
PATCH v3 2/2 bus: ti-sysc: sysc_check_children(): Change return type to void
Change return type of function sysc_check_children() from int to void as it always returns 0. Remove its return statement as well.
At call site, remove the variable that was used to store the return value, as well as the check on the return value.
---
- This is a new patch; labelled v3 only because it is in the same series as the previous patch.
drivers/bus/ti-sysc.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-)
drivers/bus/ti-sysc.c +2 -6
@@ -628,14 +628,12 @@ static void sysc_check_one_child(struct sysc *ddata,sysc_parse_dts_quirks (ddata, np, true); } -static int sysc_check_children (struct sysc *ddata) +static void sysc_check_children (struct sysc *ddata) {struct device_node *child;for_each_child_of_node (ddata->dev->of_node, child)sysc_check_one_child (ddata, child); - -return 0 ; }/*
@@ -788,9 +786,7 @@ static int sysc_map_and_check_registers(struct sysc *ddata)if (error)return error; - error =sysc_check_children (ddata); -if (error) -return error; +sysc_check_children (ddata); error =sysc_parse_registers (ddata);if (error)
Signature · 1 line
2.19.1
Re: [PATCH v3 2/2] bus: ti-sysc: sysc_check_children(): Change return type to void
Quoted 5 lines · Nishka Dasgupta
Change return type of function
sysc_check_children()from int to void as it always returns 0. Remove its return statement as well.
At call site, remove the variable that was used to store the return value, as well as the check on the return value.
You don't need to describe each and everything as it is obvious from code. How about?
"Change return type of sysc_check_children() to "void" as it never returns error"
Should both patches can be squashed into one patch?
Quoted 40 lines
Signed-off-by Nishka Dasgupta <[email protected]>---
- This is a new patch; labelled v3 only because it is in the same series as the previous patch.drivers/bus/ti-sysc.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-)drivers/bus/ti-sysc.c +2
-6@@ -628,14 +628,12 @@ static void sysc_check_one_child(struct sysc *ddata,sysc_parse_dts_quirks (ddata, np, true); } -static int sysc_check_children (struct sysc *ddata) +static void sysc_check_children (struct sysc *ddata) {struct device_node *child;for_each_child_of_node (ddata->dev->of_node, child)sysc_check_one_child (ddata, child); - -return 0 ; }/* @@ -788,9 +786,7 @@ static int sysc_map_and_check_registers(struct sysc *ddata)if (error)return error; - error =sysc_check_children (ddata); -if (error) -return error; +sysc_check_children (ddata); error =sysc_parse_registers (ddata);if (error)
Signature · 2 lines
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
Tony Lindgren
maintainerRe: [PATCH v3 2/2] bus: ti-sysc: sysc_check_children(): Change return type to void
Quoted 8 lines · Roger Quadros
Quoted 5 lines · Nishka Dasgupta
Change return type of function
sysc_check_children()from int to void as it always returns 0. Remove its return statement as well.
At call site, remove the variable that was used to store the return value, as well as the check on the return value.
Quoted 6 lines
You don't need to describe each and everything as it is obvious from code. How about?
"Change return type ofsysc_check_children()to "void" as it never returns error"Should both patches can be squashed into one patch?
Sure why not, makes it easier to follow :)
Regards,
Tony
PATCH v4 1/1 bus: ti-sysc: Change return types of functions
Change return type of functions sysc_check_one_child() and sysc_check_children() from int to void as neither ever returns an error. Modify call sites of both functions accordingly.
---
Changes in v4:
- Merge into a single patch the two patches for sysc_check_one_child() and sysc_check_children().
Changes in v3:
- Add patch for sysc_check_children().
- Remove return statement in sysc_check_one_child().
- Remove braces at call site.
Changes in v2:
- Remove error variable entirely.
- Change return type of sysc_check_one_child().
drivers/bus/ti-sysc.c | 22 ++++++---------------- 1 file changed, 6 insertions(+), 16 deletions(-)
drivers/bus/ti-sysc.c +6 -16
@@ -615,8 +615,8 @@ static void sysc_check_quirk_stdout(struct sysc *ddata,* node but children have "ti,hwmods". These belong to the interconnect * target node and are managed by this driver. */ -static int sysc_check_one_child (struct sysc *ddata, -struct device_node *np) +static void sysc_check_one_child (struct sysc *ddata, +struct device_node *np) {const char *name;
@@ -626,22 +626,14 @@ static int sysc_check_one_child(struct sysc *ddata,sysc_check_quirk_stdout (ddata, np);sysc_parse_dts_quirks (ddata, np, true); - -return 0 ; } -static int sysc_check_children (struct sysc *ddata) +static void sysc_check_children (struct sysc *ddata) {struct device_node *child; -int error; - -for_each_child_of_node (ddata->dev->of_node, child) { - error =sysc_check_one_child (ddata, child); -if (error) -return error; - } -return 0 ; +for_each_child_of_node (ddata->dev->of_node, child) +sysc_check_one_child (ddata, child); }/*
@@ -794,9 +786,7 @@ static int sysc_map_and_check_registers(struct sysc *ddata)if (error)return error; - error =sysc_check_children (ddata); -if (error) -return error; +sysc_check_children (ddata); error =sysc_parse_registers (ddata);if (error)
Signature · 1 line
2.19.1
Re: [PATCH v4] bus: ti-sysc: Change return types of functions
Quoted 5 lines · Nishka Dasgupta
Change return type of functions
sysc_check_one_child()andsysc_check_children()from int to void as neither ever returns an error. Modify call sites of both functions accordingly.Signed-off-by Nishka Dasgupta <[email protected]>
cheers,
-roger
Quoted 68 lines
---
Changes in v4:
- Merge into a single patch the two patches forsysc_check_one_child()andsysc_check_children().
Changes in v3:
- Add patch forsysc_check_children().
- Remove return statement insysc_check_one_child().
- Remove braces at call site.
Changes in v2:
- Remove error variable entirely.
- Change return type ofsysc_check_one_child().drivers/bus/ti-sysc.c | 22 ++++++---------------- 1 file changed, 6 insertions(+), 16 deletions(-)drivers/bus/ti-sysc.c +6
-16@@ -615,8 +615,8 @@ static void sysc_check_quirk_stdout(struct sysc *ddata,* node but children have "ti,hwmods". These belong to the interconnect * target node and are managed by this driver. */ -static int sysc_check_one_child (struct sysc *ddata, -struct device_node *np) +static void sysc_check_one_child (struct sysc *ddata, +struct device_node *np) {const char *name;@@ -626,22 +626,14 @@ static int sysc_check_one_child(struct sysc *ddata,sysc_check_quirk_stdout (ddata, np);sysc_parse_dts_quirks (ddata, np, true); - -return 0 ; } -static int sysc_check_children (struct sysc *ddata) +static void sysc_check_children (struct sysc *ddata) {struct device_node *child; -int error; - -for_each_child_of_node (ddata->dev->of_node, child) { - error =sysc_check_one_child (ddata, child); -if (error) -return error; - } -return 0 ; +for_each_child_of_node (ddata->dev->of_node, child) +sysc_check_one_child (ddata, child); }/* @@ -794,9 +786,7 @@ static int sysc_map_and_check_registers(struct sysc *ddata)if (error)return error; - error =sysc_check_children (ddata); -if (error) -return error; +sysc_check_children (ddata); error =sysc_parse_registers (ddata);if (error)
Signature · 2 lines
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
Tony Lindgren
maintainerRe: [PATCH v4] bus: ti-sysc: Change return types of functions
Quoted 8 lines · Roger Quadros
Quoted 5 lines · Nishka Dasgupta
Change return type of functions
sysc_check_one_child()andsysc_check_children()from int to void as neither ever returns an error. Modify call sites of both functions accordingly.Signed-off-by Nishka Dasgupta <[email protected]>Acked-by Roger Quadros <[email protected]>
Applying into omap-for-v5.4/ti-sysc thanks.
Tony