Skip to contentSkip to conversation

ARM: dts: qcom: ipq4019: Add SDHCI controller node

PATCH New Robert Marko 1 participant 1 message Aug 15, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: dts: qcom: ipq4019: Add SDHCI controller node

IPQ4019 has a built in SD/eMMC controller which is supported by the SDHCI MSM driver, by the "qcom,sdhci-msm-v4" binding.
So lets add the appropriate node for it.

---
 arch/arm/boot/dts/qcom-ipq4019.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)
arch/arm/boot/dts/qcom-ipq4019.dtsi +12 -0
index 56f51599852d..8ef26da32ff4 100644
@@ -206,6 +206,18 @@
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		sdhci: sdhci@7824900 {
+			compatible = "qcom,sdhci-msm-v4";
+			reg = <0x7824900 0x11c>, <0x7824000 0x800>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			bus-width = <8>;
+			clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_DCD_XO_CLK>;
+			clock-names = "core", "iface", "xo";
+			status = "disabled";
+		};
+
 		blsp_dma: dma@7884000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0x07884000 0x23000>;
Signature · 1 line
2.21.0