uio: uio_pdrv_genirq: Make UIO name controllable via DT node property
Subsystems (2)
PATCH v2 1/2 uio: uio_pdrv_genirq: Make UIO name controllable via DT node property
When probed via DT, the uio_pdrv_genirq driver currently uses the name of the node and exposes that as name of the UIO device to userspace.
This doesn't work for systems where multiple nodes with the same name (but different unit addresses) are present, or for systems where the node names are auto-generated by a third-party tool.
This patch adds the possibility to read the UIO name from the optional "linux,uio-name" property.
--- drivers/uio/uio_pdrv_genirq.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-)
drivers/uio/uio_pdrv_genirq.c +11 -3
@@ -105,12 +105,15 @@ static int uio_pdrv_genirq_irqcontrol(struct uio_info *dev_info, s32 irq_on)static int uio_pdrv_genirq_probe (struct platform_device *pdev) {struct uio_info *uioinfo =dev_get_platdata (&pdev->dev); +struct device_node *node = pdev->dev.of_node;struct uio_pdrv_genirq_platdata *priv;struct uio_mem *uiomem;int ret = -EINVAL ;int i; -if (pdev->dev.of_node) { +if (node) { +const char *name; +/* alloc uioinfo for one device */ uioinfo =devm_kzalloc (&pdev->dev,sizeof (*uioinfo),GFP_KERNEL );
@@ -118,8 +121,13 @@ static int uio_pdrv_genirq_probe(struct platform_device *pdev)dev_err (&pdev->dev,"unable to kmalloc\n" );return -ENOMEM ; } - uioinfo->name =devm_kasprintf (&pdev->dev,GFP_KERNEL ,"%pOFn" , - pdev->dev.of_node); + +if (!of_property_read_string (node,"linux,uio-name" , &name)) + uioinfo->name =devm_kstrdup (&pdev->dev, name,GFP_KERNEL ); +else + uioinfo->name =devm_kasprintf (&pdev->dev,GFP_KERNEL , +"%pOFn" , node); + uioinfo->version ="devicetree" ;/* Multiple IRQs are not supported */ }
Signature · 1 line
2.21.0
PATCH v2 2/2 uio: Documentation: Add information on using uio_pdrv_genirq with DT
Add a paragraph to describe the use of the "of_id" module parameter, along with the new DT property.
--- Documentation/driver-api/uio-howto.rst | 7 +++++++ 1 file changed, 7 insertions(+)
Documentation/driver-api/uio-howto.rst +7 -0
@@ -408,6 +408,13 @@ handler code. You also do not need to know anything about the chip's internal registers to create the kernel part of the driver. All you need to know is the irq number of the pin the chip is connected to. +When used in a device-tree enabled system, the driver needs to be +probed with the ``"of_id"`` module parameter set to the ``"compatible"`` +string of the node the driver is supposed to handle. By default, the +node's name (without the unit address) is exposed as name for the +UIO device in userspace. To set a custom name, a property named +``"linux,uio-name"`` may be specified in the DT node. + Using uio_dmem_genirq for platform devices ------------------------------------------
Signature · 1 line
2.21.0
Hi Greg,
Quoted 9 lines · Daniel Mack
When probed via DT, the
uio_pdrv_genirqdriver currently uses the name of the node and exposes that as name of the UIO device to userspace.This doesn't work for systems where multiple nodes with the same name (but different unit addresses) are present, or for systems where the node names are auto-generated by a third-party tool.
This patch adds the possibility to read the UIO name from the optional "linux,uio-name" property.
Any opinion on this one?
Thanks,
Daniel
Quoted 44 lines
Signed-off-by Daniel Mack <[email protected]>--- drivers/uio/uio_pdrv_genirq.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-)drivers/uio/uio_pdrv_genirq.c +11
-3@@ -105,12 +105,15 @@ static int uio_pdrv_genirq_irqcontrol(struct uio_info *dev_info, s32 irq_on)static int uio_pdrv_genirq_probe (struct platform_device *pdev) {struct uio_info *uioinfo =dev_get_platdata (&pdev->dev); +struct device_node *node = pdev->dev.of_node;struct uio_pdrv_genirq_platdata *priv;struct uio_mem *uiomem;int ret = -EINVAL ;int i; -if (pdev->dev.of_node) { +if (node) { +const char *name; +/* alloc uioinfo for one device */ uioinfo =devm_kzalloc (&pdev->dev,sizeof (*uioinfo),GFP_KERNEL );@@ -118,8 +121,13 @@ static int uio_pdrv_genirq_probe(struct platform_device *pdev)dev_err (&pdev->dev,"unable to kmalloc\n" );return -ENOMEM ; } - uioinfo->name =devm_kasprintf (&pdev->dev,GFP_KERNEL ,"%pOFn" , - pdev->dev.of_node); + +if (!of_property_read_string (node,"linux,uio-name" , &name)) + uioinfo->name =devm_kstrdup (&pdev->dev, name,GFP_KERNEL ); +else + uioinfo->name =devm_kasprintf (&pdev->dev,GFP_KERNEL , +"%pOFn" , node); + uioinfo->version ="devicetree" ;/* Multiple IRQs are not supported */ }
Greg KH
maintainerQuoted 6 lines · Daniel Mack
Hi Greg,
Quoted 3 lines · Daniel Mack
When probed via DT, the
uio_pdrv_genirqdriver currently uses the name of the node and exposes that as name of the UIO device to userspace.
Quoted 8 lines
Quoted 6 lines
This doesn't work for systems where multiple nodes with the same name (but different unit addresses) are present, or for systems where the node names are auto-generated by a third-party tool.
This patch adds the possibility to read the UIO name from the optional "linux,uio-name" property.
Any opinion on this one?
Sorry, it's in my "to review" queue, was traveling all last week and it's really big now :(
it's not lost...
greg k-h