Skip to contentSkip to conversation

Add definition for the number of standard PCI BARs

PATCH Superseded Denis Efremov 6 participants 18 messages Aug 16, 2019 – Sep 5, 2019

Subsystems (16)
Networking Network drivers x86 KVM +12 more subsystems

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

v2 cover Add definition for the number of standard PCI BARs

Code that iterates over all standard PCI BARs typically uses PCI_STD_RESOURCE_END, but this is error-prone because it requires "i <= PCI_STD_RESOURCE_END" rather than something like
"i < PCI_STD_NUM_BARS". We could add such a definition and use it the same way PCI_SRIOV_NUM_BARS is used. There is already the definition PCI_BAR_COUNT for s390 only. Thus, this patchset introduces it globally.

Changes in v2:
- Reverse checks in pci_iomap_range,pci_iomap_wc_range.
- Refactor loops in vfio_pci to keep PCI_STD_RESOURCES.
- Add 2 new patches to replace the magic constant with new define.
- Split net patch in v1 to separate stmmac and dwc-xlgmac patches.

Denis Efremov (10):
PCI: Add define for the number of standard PCI BARs s390/pci: Loop using PCI_STD_NUM_BARS x86/PCI: Loop using PCI_STD_NUM_BARS
stmmac: pci: Loop using PCI_STD_NUM_BARS
net: dwc-xlgmac: Loop using PCI_STD_NUM_BARS rapidio/tsi721: Loop using PCI_STD_NUM_BARS
efifb: Loop using PCI_STD_NUM_BARS
vfio_pci: Loop using PCI_STD_NUM_BARS
PCI: hv: Use PCI_STD_NUM_BARS
PCI: Use PCI_STD_NUM_BARS

 arch/s390/include/asm/pci.h                      |  5 +----
 arch/s390/include/asm/pci_clp.h                  |  6 +++---
 arch/s390/pci/pci.c                              | 16 ++++++++--------
 arch/s390/pci/pci_clp.c                          |  6 +++---
 arch/x86/pci/common.c                            |  2 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c |  4 ++--
 drivers/net/ethernet/synopsys/dwc-xlgmac-pci.c   |  2 +-
 drivers/pci/controller/pci-hyperv.c              | 10 +++++-----
 drivers/pci/pci.c                                | 11 ++++++-----
 drivers/pci/quirks.c                             |  4 ++--
 drivers/rapidio/devices/tsi721.c                 |  2 +-
 drivers/vfio/pci/vfio_pci.c                      | 11 +++++++----
 drivers/vfio/pci/vfio_pci_config.c               | 10 ++++++----
 drivers/vfio/pci/vfio_pci_private.h              |  4 ++--
 drivers/video/fbdev/efifb.c                      |  2 +-
 include/linux/pci.h                              |  2 +-
 include/uapi/linux/pci_regs.h                    |  1 +
 17 files changed, 51 insertions(+), 47 deletions(-)
Signature · 1 line
2.21.0
#1 lore raw

PATCH v2 1/10 PCI: Add define for the number of standard PCI BARs

Code that iterates over all standard PCI BARs typically uses PCI_STD_RESOURCE_END. However, it requires the "unusual" loop condition "i <= PCI_STD_RESOURCE_END" rather than something more standard like "i < PCI_STD_NUM_BARS".

This patch adds the definition PCI_STD_NUM_BARS which is equivalent to "PCI_STD_RESOURCE_END + 1" and updates loop conditions to use it.

---
 drivers/pci/quirks.c          | 2 +-
 include/linux/pci.h           | 2 +-
 include/uapi/linux/pci_regs.h | 1 +
 3 files changed, 3 insertions(+), 2 deletions(-)
drivers/pci/quirks.c +1 -1
index 208aacf39329..02bdf3a0231e 100644
@@ -475,7 +475,7 @@ static void quirk_extend_bar_to_page(struct pci_dev *dev)
 {
 	int i;
 
-	for (i = 0; i <= PCI_STD_RESOURCE_END; i++) {
+	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
 		struct resource *r = &dev->resource[i];
 
 		if (r->flags & IORESOURCE_MEM && resource_size(r) < PAGE_SIZE) {
include/linux/pci.h +1 -1
index 9e700d9f9f28..7b9590d5dc2d 100644
@@ -76,7 +76,7 @@ enum pci_mmap_state {
 enum {
 	/* #0-5: standard PCI resources */
 	PCI_STD_RESOURCES,
-	PCI_STD_RESOURCE_END = 5,
+	PCI_STD_RESOURCE_END = PCI_STD_RESOURCES + PCI_STD_NUM_BARS - 1,
 
 	/* #6: expansion ROM resource */
 	PCI_ROM_RESOURCE,
include/uapi/linux/pci_regs.h +1 -0
index f28e562d7ca8..68b571d491eb 100644
@@ -34,6 +34,7 @@
  * of which the first 64 bytes are standardized as follows:
  */
 #define PCI_STD_HEADER_SIZEOF	64
+#define PCI_STD_NUM_BARS	6	/* Number of standard BARs */
 #define PCI_VENDOR_ID		0x00	/* 16 bits */
 #define PCI_DEVICE_ID		0x02	/* 16 bits */
 #define PCI_COMMAND		0x04	/* 16 bits */
Signature · 1 line
2.21.0
#2 lore raw

PATCH v2 2/10 s390/pci: Loop using PCI_STD_NUM_BARS

In reply to Denis Efremov

Refactor loops to use 'i < PCI_STD_NUM_BARS' instead of 'i <= PCI_STD_RESOURCE_END'.

---
 arch/s390/include/asm/pci.h     |  5 +----
 arch/s390/include/asm/pci_clp.h |  6 +++---
 arch/s390/pci/pci.c             | 16 ++++++++--------
 arch/s390/pci/pci_clp.c         |  6 +++---
 4 files changed, 15 insertions(+), 18 deletions(-)
arch/s390/include/asm/pci.h +1 -4
index a2399eff84ca..3a06c264ea53 100644
@@ -2,9 +2,6 @@
 #ifndef __ASM_S390_PCI_H
 #define __ASM_S390_PCI_H
 
-/* must be set before including pci_clp.h */
-#define PCI_BAR_COUNT	6
-
 #include <linux/pci.h>
 #include <linux/mutex.h>
 #include <linux/iommu.h>
@@ -138,7 +135,7 @@ struct zpci_dev {
 
 	char res_name[16];
 	bool mio_capable;
-	struct zpci_bar_struct bars[PCI_BAR_COUNT];
+	struct zpci_bar_struct bars[PCI_STD_NUM_BARS];
 
 	u64		start_dma;	/* Start of available DMA addresses */
 	u64		end_dma;	/* End of available DMA addresses */
arch/s390/include/asm/pci_clp.h +3 -3
index 50359172cc48..bd2cb4ea7d93 100644
@@ -77,7 +77,7 @@ struct mio_info {
 	struct {
 		u64 wb;
 		u64 wt;
-	} addr[PCI_BAR_COUNT];
+	} addr[PCI_STD_NUM_BARS];
 	u32 reserved[6];
 } __packed;
 
@@ -98,9 +98,9 @@ struct clp_rsp_query_pci {
 	u16 util_str_avail	:  1;	/* utility string available? */
 	u16 pfgid		:  8;	/* pci function group id */
 	u32 fid;			/* pci function id */
-	u8 bar_size[PCI_BAR_COUNT];
+	u8 bar_size[PCI_STD_NUM_BARS];
 	u16 pchid;
-	__le32 bar[PCI_BAR_COUNT];
+	__le32 bar[PCI_STD_NUM_BARS];
 	u8 pfip[CLP_PFIP_NR_SEGMENTS];	/* pci function internal path */
 	u32			: 16;
 	u8 fmb_len;
arch/s390/pci/pci.c +8 -8
index b0e3b9a0e488..aca372c8e34f 100644
@@ -43,7 +43,7 @@ static DECLARE_BITMAP(zpci_domain, ZPCI_NR_DEVICES);
 static DEFINE_SPINLOCK(zpci_domain_lock);
 
 #define ZPCI_IOMAP_ENTRIES						\
-	min(((unsigned long) ZPCI_NR_DEVICES * PCI_BAR_COUNT / 2),	\
+	min(((unsigned long) ZPCI_NR_DEVICES * PCI_STD_NUM_BARS / 2),	\
 	    ZPCI_IOMAP_MAX_ENTRIES)
 
 static DEFINE_SPINLOCK(zpci_iomap_lock);
@@ -294,7 +294,7 @@ static void __iomem *pci_iomap_range_mio(struct pci_dev *pdev, int bar,
 void __iomem *pci_iomap_range(struct pci_dev *pdev, int bar,
 			      unsigned long offset, unsigned long max)
 {
-	if (!pci_resource_len(pdev, bar) || bar >= PCI_BAR_COUNT)
+	if (bar >= PCI_STD_NUM_BARS || !pci_resource_len(pdev, bar))
 		return NULL;
 
 	if (static_branch_likely(&have_mio))
@@ -324,7 +324,7 @@ static void __iomem *pci_iomap_wc_range_mio(struct pci_dev *pdev, int bar,
 void __iomem *pci_iomap_wc_range(struct pci_dev *pdev, int bar,
 				 unsigned long offset, unsigned long max)
 {
-	if (!pci_resource_len(pdev, bar) || bar >= PCI_BAR_COUNT)
+	if (bar >= PCI_STD_NUM_BARS || !pci_resource_len(pdev, bar))
 		return NULL;
 
 	if (static_branch_likely(&have_mio))
@@ -416,7 +416,7 @@ static void zpci_map_resources(struct pci_dev *pdev)
 	resource_size_t len;
 	int i;
 
-	for (i = 0; i < PCI_BAR_COUNT; i++) {
+	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
 		len = pci_resource_len(pdev, i);
 		if (!len)
 			continue;
@@ -451,7 +451,7 @@ static void zpci_unmap_resources(struct pci_dev *pdev)
 	if (zpci_use_mio(zdev))
 		return;
 
-	for (i = 0; i < PCI_BAR_COUNT; i++) {
+	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
 		len = pci_resource_len(pdev, i);
 		if (!len)
 			continue;
@@ -514,7 +514,7 @@ static int zpci_setup_bus_resources(struct zpci_dev *zdev,
 	snprintf(zdev->res_name, sizeof(zdev->res_name),
 		 "PCI Bus %04x:%02x", zdev->domain, ZPCI_BUS_NR);
 
-	for (i = 0; i < PCI_BAR_COUNT; i++) {
+	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
 		if (!zdev->bars[i].size)
 			continue;
 		entry = zpci_alloc_iomap(zdev);
@@ -551,7 +551,7 @@ static void zpci_cleanup_bus_resources(struct zpci_dev *zdev)
 {
 	int i;
 
-	for (i = 0; i < PCI_BAR_COUNT; i++) {
+	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
 		if (!zdev->bars[i].size || !zdev->bars[i].res)
 			continue;
 
@@ -573,7 +573,7 @@ int pcibios_add_device(struct pci_dev *pdev)
 	pdev->dev.dma_ops = &s390_pci_dma_ops;
 	zpci_map_resources(pdev);
 
-	for (i = 0; i < PCI_BAR_COUNT; i++) {
+	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
 		res = &pdev->resource[i];
 		if (res->parent || !res->flags)
 			continue;
arch/s390/pci/pci_clp.c +3 -3
index 9bdff4defef1..8b729b5f2972 100644
@@ -145,7 +145,7 @@ static int clp_store_query_pci_fn(struct zpci_dev *zdev,
 {
 	int i;
 
-	for (i = 0; i < PCI_BAR_COUNT; i++) {
+	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
 		zdev->bars[i].val = le32_to_cpu(response->bar[i]);
 		zdev->bars[i].size = response->bar_size[i];
 	}
@@ -164,8 +164,8 @@ static int clp_store_query_pci_fn(struct zpci_dev *zdev,
 		       sizeof(zdev->util_str));
 	}
 	zdev->mio_capable = response->mio_addr_avail;
-	for (i = 0; i < PCI_BAR_COUNT; i++) {
-		if (!(response->mio.valid & (1 << (PCI_BAR_COUNT - i - 1))))
+	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
+		if (!(response->mio.valid & (1 << (PCI_STD_NUM_BARS - i - 1))))
 			continue;
 
 		zdev->bars[i].mio_wb = (void __iomem *) response->mio.addr[i].wb;
Signature · 1 line
2.21.0
Acked-by on v2 2/10
#3 lore raw

Re: [PATCH v2 02/10] s390/pci: Loop using PCI_STD_NUM_BARS

Quoted 11 lines · Denis Efremov

Refactor loops to use 'i < PCI_STD_NUM_BARS' instead of 'i <= PCI_STD_RESOURCE_END'.

---
 arch/s390/include/asm/pci.h     |  5 +----
 arch/s390/include/asm/pci_clp.h |  6 +++---
 arch/s390/pci/pci.c             | 16 ++++++++--------
 arch/s390/pci/pci_clp.c         |  6 +++---
 4 files changed, 15 insertions(+), 18 deletions(-)
#4 lore raw

PATCH v2 3/10 x86/PCI: Loop using PCI_STD_NUM_BARS

In reply to Denis Efremov

Refactor loops to use 'i < PCI_STD_NUM_BARS' instead of 'i <= PCI_STD_RESOURCE_END'.

---
 arch/x86/pci/common.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/pci/common.c +1 -1
index 9acab6ac28f5..1e59df041456 100644
@@ -135,7 +135,7 @@ static void pcibios_fixup_device_resources(struct pci_dev *dev)
 		* resource so the kernel doesn't attempt to assign
 		* it later on in pci_assign_unassigned_resources
 		*/
-		for (bar = 0; bar <= PCI_STD_RESOURCE_END; bar++) {
+		for (bar = 0; bar < PCI_STD_NUM_BARS; bar++) {
 			bar_r = &dev->resource[bar];
 			if (bar_r->start == 0 && bar_r->end != 0) {
 				bar_r->flags = 0;
Signature · 1 line
2.21.0
#5 lore raw

Re: [PATCH v2 03/10] x86/PCI: Loop using PCI_STD_NUM_BARS

Quoted 2 lines · Denis Efremov

Refactor loops to use 'i < PCI_STD_NUM_BARS' instead of 'i <= PCI_STD_RESOURCE_END'.

Please describe the WHY not the WHAT. I can see the WHAT from the patch itself, but I can't figure out WHY.

Thanks,

tglx

#6 lore raw

Re: [PATCH v2 03/10] x86/PCI: Loop using PCI_STD_NUM_BARS

Quoted 7 lines · Thomas Gleixner
Quoted 2 lines · Denis Efremov

Refactor loops to use 'i < PCI_STD_NUM_BARS' instead of 'i <= PCI_STD_RESOURCE_END'.

Please describe the WHY not the WHAT. I can see the WHAT from the patch itself, but I can't figure out WHY.

Good point; the WHY is to use idiomatic C style and avoid the fencepost error of using "i < PCI_STD_RESOURCE_END" when "i <= PCI_STD_RESOURCE_END" is required, e.g., 2f686f1d9bee ("PCI: Correct PCI_STD_RESOURCE_END usage")

Denis, can you include something along those lines in the next version?

#7 lore raw

PATCH v2 4/10 stmmac: pci: Loop using PCI_STD_NUM_BARS

In reply to Denis Efremov

Refactor loops to use 'i < PCI_STD_NUM_BARS' instead of 'i <= PCI_STD_RESOURCE_END'.

---
 drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c +2 -2
index 86f9c07a38cf..cfe496cdd78b 100644
@@ -258,7 +258,7 @@ static int stmmac_pci_probe(struct pci_dev *pdev,
 	}
 
 	/* Get the base address of device */
-	for (i = 0; i <= PCI_STD_RESOURCE_END; i++) {
+	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
 		if (pci_resource_len(pdev, i) == 0)
 			continue;
 		ret = pcim_iomap_regions(pdev, BIT(i), pci_name(pdev));
@@ -296,7 +296,7 @@ static void stmmac_pci_remove(struct pci_dev *pdev)
 
 	stmmac_dvr_remove(&pdev->dev);
 
-	for (i = 0; i <= PCI_STD_RESOURCE_END; i++) {
+	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
 		if (pci_resource_len(pdev, i) == 0)
 			continue;
 		pcim_iounmap_regions(pdev, BIT(i));
Signature · 1 line
2.21.0
#8 lore raw

PATCH v2 5/10 net: dwc-xlgmac: Loop using PCI_STD_NUM_BARS

In reply to Denis Efremov

Refactor loops to use 'i < PCI_STD_NUM_BARS' instead of 'i <= PCI_STD_RESOURCE_END'.

---
 drivers/net/ethernet/synopsys/dwc-xlgmac-pci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/synopsys/dwc-xlgmac-pci.c +1 -1
index 386bafe74c3f..fa8604d7b797 100644
@@ -34,7 +34,7 @@ static int xlgmac_probe(struct pci_dev *pcidev, const struct pci_device_id *id)
 		return ret;
 	}
 
-	for (i = 0; i <= PCI_STD_RESOURCE_END; i++) {
+	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
 		if (pci_resource_len(pcidev, i) == 0)
 			continue;
 		ret = pcim_iomap_regions(pcidev, BIT(i), XLGMAC_DRV_NAME);
Signature · 1 line
2.21.0
#9 lore raw

PATCH v2 6/10 rapidio/tsi721: Loop using PCI_STD_NUM_BARS

In reply to Denis Efremov

Refactor loops to use 'i < PCI_STD_NUM_BARS' instead of 'i <= PCI_STD_RESOURCE_END'.

---
 drivers/rapidio/devices/tsi721.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/rapidio/devices/tsi721.c +1 -1
index 125a173bed45..4dd31dd9feea 100644
@@ -2755,7 +2755,7 @@ static int tsi721_probe(struct pci_dev *pdev,
 	{
 		int i;
 
-		for (i = 0; i <= PCI_STD_RESOURCE_END; i++) {
+		for (i = 0; i < PCI_STD_NUM_BARS; i++) {
 			tsi_debug(INIT, &pdev->dev, "res%d %pR",
 				  i, &pdev->resource[i]);
 		}
Signature · 1 line
2.21.0
#10 lore raw

PATCH v2 7/10 efifb: Loop using PCI_STD_NUM_BARS

In reply to Denis Efremov

Refactor loops to use 'i < PCI_STD_NUM_BARS' instead of 'i <= PCI_STD_RESOURCE_END'.

---
 drivers/video/fbdev/efifb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/video/fbdev/efifb.c +1 -1
index 04a22663b4fb..6c72b825e92a 100644
@@ -668,7 +668,7 @@ static void efifb_fixup_resources(struct pci_dev *dev)
 	if (!base)
 		return;
 
-	for (i = 0; i <= PCI_STD_RESOURCE_END; i++) {
+	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
 		struct resource *res = &dev->resource[i];
 
 		if (!(res->flags & IORESOURCE_MEM))
Signature · 1 line
2.21.0
#11 lore raw

PATCH v2 8/10 vfio_pci: Loop using PCI_STD_NUM_BARS

In reply to Denis Efremov

Refactor loops to use 'i < PCI_STD_NUM_BARS' instead of 'i <= PCI_STD_RESOURCE_END'.

---
 drivers/vfio/pci/vfio_pci.c         | 11 +++++++----
 drivers/vfio/pci/vfio_pci_config.c  | 10 ++++++----
 drivers/vfio/pci/vfio_pci_private.h |  4 ++--
 3 files changed, 15 insertions(+), 10 deletions(-)
drivers/vfio/pci/vfio_pci.c +7 -4
index 703948c9fbe1..cb7d220d3246 100644
@@ -110,13 +110,15 @@ static inline bool vfio_pci_is_vga(struct pci_dev *pdev)
 static void vfio_pci_probe_mmaps(struct vfio_pci_device *vdev)
 {
 	struct resource *res;
-	int bar;
+	int i;
 	struct vfio_pci_dummy_resource *dummy_res;
 
 	INIT_LIST_HEAD(&vdev->dummy_resources_list);
 
-	for (bar = PCI_STD_RESOURCES; bar <= PCI_STD_RESOURCE_END; bar++) {
-		res = vdev->pdev->resource + bar;
+	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
+		int bar = i + PCI_STD_RESOURCES;
+
+		res = &vdev->pdev->resource[bar];
 
 		if (!IS_ENABLED(CONFIG_VFIO_PCI_MMAP))
 			goto no_mmap;
@@ -399,7 +401,8 @@ static void vfio_pci_disable(struct vfio_pci_device *vdev)
 
 	vfio_config_free(vdev);
 
-	for (bar = PCI_STD_RESOURCES; bar <= PCI_STD_RESOURCE_END; bar++) {
+	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
+		bar = i + PCI_STD_RESOURCES;
 		if (!vdev->barmap[bar])
 			continue;
 		pci_iounmap(pdev, vdev->barmap[bar]);
drivers/vfio/pci/vfio_pci_config.c +6 -4
index f0891bd8444c..df8772395219 100644
@@ -455,16 +455,18 @@ static void vfio_bar_fixup(struct vfio_pci_device *vdev)
 
 	bar = (__le32 *)&vdev->vconfig[PCI_BASE_ADDRESS_0];
 
-	for (i = PCI_STD_RESOURCES; i <= PCI_STD_RESOURCE_END; i++, bar++) {
-		if (!pci_resource_start(pdev, i)) {
+	for (i = 0; i < PCI_STD_NUM_BARS; i++, bar++) {
+		int ibar = i + PCI_STD_RESOURCES;
+
+		if (!pci_resource_start(pdev, ibar)) {
 			*bar = 0; /* Unmapped by host = unimplemented to user */
 			continue;
 		}
 
-		mask = ~(pci_resource_len(pdev, i) - 1);
+		mask = ~(pci_resource_len(pdev, ibar) - 1);
 
 		*bar &= cpu_to_le32((u32)mask);
-		*bar |= vfio_generate_bar_flags(pdev, i);
+		*bar |= vfio_generate_bar_flags(pdev, ibar);
 
 		if (*bar & cpu_to_le32(PCI_BASE_ADDRESS_MEM_TYPE_64)) {
 			bar++;
drivers/vfio/pci/vfio_pci_private.h +2 -2
index ee6ee91718a4..8a2c7607d513 100644
@@ -86,8 +86,8 @@ struct vfio_pci_reflck {
 
 struct vfio_pci_device {
 	struct pci_dev		*pdev;
-	void __iomem		*barmap[PCI_STD_RESOURCE_END + 1];
-	bool			bar_mmap_supported[PCI_STD_RESOURCE_END + 1];
+	void __iomem		*barmap[PCI_STD_NUM_BARS];
+	bool			bar_mmap_supported[PCI_STD_NUM_BARS];
 	u8			*pci_config_map;
 	u8			*vconfig;
 	struct perm_bits	*msi_perm;
Signature · 1 line
2.21.0
#12 lore raw

Re: [PATCH v2 08/10] vfio_pci: Loop using PCI_STD_NUM_BARS

Quoted 60 lines · On Fri, 16 Aug 2019 12:24:35 +0300 Denis Efremov <[email protected]> wrote:

Refactor loops to use 'i < PCI_STD_NUM_BARS' instead of 'i <= PCI_STD_RESOURCE_END'.

---
 drivers/vfio/pci/vfio_pci.c         | 11 +++++++----
 drivers/vfio/pci/vfio_pci_config.c  | 10 ++++++----
 drivers/vfio/pci/vfio_pci_private.h |  4 ++--
 3 files changed, 15 insertions(+), 10 deletions(-)
drivers/vfio/pci/vfio_pci.c +7 -4
index 703948c9fbe1..cb7d220d3246 100644
@@ -110,13 +110,15 @@ static inline bool vfio_pci_is_vga(struct pci_dev *pdev)
 static void vfio_pci_probe_mmaps(struct vfio_pci_device *vdev)
 {
 	struct resource *res;
-	int bar;
+	int i;
 	struct vfio_pci_dummy_resource *dummy_res;
 
 	INIT_LIST_HEAD(&vdev->dummy_resources_list);
 
-	for (bar = PCI_STD_RESOURCES; bar <= PCI_STD_RESOURCE_END; bar++) {
-		res = vdev->pdev->resource + bar;
+	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
+		int bar = i + PCI_STD_RESOURCES;
+
+		res = &vdev->pdev->resource[bar];
 
 		if (!IS_ENABLED(CONFIG_VFIO_PCI_MMAP))
 			goto no_mmap;
@@ -399,7 +401,8 @@ static void vfio_pci_disable(struct vfio_pci_device *vdev)
 
 	vfio_config_free(vdev);
 
-	for (bar = PCI_STD_RESOURCES; bar <= PCI_STD_RESOURCE_END; bar++) {
+	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
+		bar = i + PCI_STD_RESOURCES;
 		if (!vdev->barmap[bar])
 			continue;
 		pci_iounmap(pdev, vdev->barmap[bar]);
drivers/vfio/pci/vfio_pci_config.c +4 -2
index f0891bd8444c..df8772395219 100644
@@ -455,16 +455,18 @@ static void vfio_bar_fixup(struct vfio_pci_device *vdev)
 
 	bar = (__le32 *)&vdev->vconfig[PCI_BASE_ADDRESS_0];
 
-	for (i = PCI_STD_RESOURCES; i <= PCI_STD_RESOURCE_END; i++, bar++) {
-		if (!pci_resource_start(pdev, i)) {
+	for (i = 0; i < PCI_STD_NUM_BARS; i++, bar++) {
+		int ibar = i + PCI_STD_RESOURCES;
+
+		if (!pci_resource_start(pdev, ibar)) {
 			*bar = 0; /* Unmapped by host = unimplemented to user */
 			continue;
 		}

drivers/vfio/pci/vfio_pci_config.c static void vfio_bar_fixup(struct vfio_pci_device *vdev) · line 472

Quoted 10 lines
drivers/vfio/pci/vfio_pci_config.c +2 -2
 
-		mask = ~(pci_resource_len(pdev, i) - 1);
+		mask = ~(pci_resource_len(pdev, ibar) - 1);
 
 		*bar &= cpu_to_le32((u32)mask);
-		*bar |= vfio_generate_bar_flags(pdev, i);
+		*bar |= vfio_generate_bar_flags(pdev, ibar);
 
 		if (*bar & cpu_to_le32(PCI_BASE_ADDRESS_MEM_TYPE_64)) {
 			bar++;

It might be a bit cleaner to rename the 'bar' variable to 'vbar', then we have 'bar' available to use as the BAR number. It seems more consistent with other uses. Otherwise the logic looks fine. Thanks,

Alex

Quoted 15 lines
drivers/vfio/pci/vfio_pci_private.h +2 -2
index ee6ee91718a4..8a2c7607d513 100644
@@ -86,8 +86,8 @@ struct vfio_pci_reflck {
 
 struct vfio_pci_device {
 	struct pci_dev		*pdev;
-	void __iomem		*barmap[PCI_STD_RESOURCE_END + 1];
-	bool			bar_mmap_supported[PCI_STD_RESOURCE_END + 1];
+	void __iomem		*barmap[PCI_STD_NUM_BARS];
+	bool			bar_mmap_supported[PCI_STD_NUM_BARS];
 	u8			*pci_config_map;
 	u8			*vconfig;
 	struct perm_bits	*msi_perm;
#13 lore raw

PATCH v2 9/10 PCI: hv: Use PCI_STD_NUM_BARS

In reply to Denis Efremov

Replace the magic constant with define PCI_STD_NUM_BARS.

---
 drivers/pci/controller/pci-hyperv.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/pci/controller/pci-hyperv.c +5 -5
index 40b625458afa..1665c23b649f 100644
@@ -307,7 +307,7 @@ struct pci_bus_relations {
 struct pci_q_res_req_response {
 	struct vmpacket_descriptor hdr;
 	s32 status;			/* negative values are failures */
-	u32 probed_bar[6];
+	u32 probed_bar[PCI_STD_NUM_BARS];
 } __packed;
 
 struct pci_set_power {
@@ -503,7 +503,7 @@ struct hv_pci_dev {
 	 * What would be observed if one wrote 0xFFFFFFFF to a BAR and then
 	 * read it back, for each of the BAR offsets within config space.
 	 */
-	u32 probed_bar[6];
+	u32 probed_bar[PCI_STD_NUM_BARS];
 };
 
 struct hv_pci_compl {
@@ -1327,7 +1327,7 @@ static void survey_child_resources(struct hv_pcibus_device *hbus)
 	 * so it's sufficient to just add them up without tracking alignment.
 	 */
 	list_for_each_entry(hpdev, &hbus->children, list_entry) {
-		for (i = 0; i < 6; i++) {
+		for (i = 0; i < PCI_STD_NUM_BARS; i++) {
 			if (hpdev->probed_bar[i] & PCI_BASE_ADDRESS_SPACE_IO)
 				dev_err(&hbus->hdev->device,
 					"There's an I/O BAR in this list!\n");
@@ -1401,7 +1401,7 @@ static void prepopulate_bars(struct hv_pcibus_device *hbus)
 	/* Pick addresses for the BARs. */
 	do {
 		list_for_each_entry(hpdev, &hbus->children, list_entry) {
-			for (i = 0; i < 6; i++) {
+			for (i = 0; i < PCI_STD_NUM_BARS; i++) {
 				bar_val = hpdev->probed_bar[i];
 				if (bar_val == 0)
 					continue;
@@ -1558,7 +1558,7 @@ static void q_resource_requirements(void *context, struct pci_response *resp,
 			"query resource requirements failed: %x\n",
 			resp->status);
 	} else {
-		for (i = 0; i < 6; i++) {
+		for (i = 0; i < PCI_STD_NUM_BARS; i++) {
 			completion->hpdev->probed_bar[i] =
 				q_res_req->probed_bar[i];
 		}
Signature · 1 line
2.21.0
#14 lore raw

PATCH v2 10/10 PCI: Use PCI_STD_NUM_BARS

In reply to Denis Efremov

Replace the magic constant with define PCI_STD_NUM_BARS.

---
 drivers/pci/pci.c    | 11 ++++++-----
 drivers/pci/quirks.c |  2 +-
 2 files changed, 7 insertions(+), 6 deletions(-)
drivers/pci/pci.c +6 -5
index 1b27b5af3d55..a9005c9eee6c 100644
@@ -3768,7 +3768,7 @@ void pci_release_selected_regions(struct pci_dev *pdev, int bars)
 {
 	int i;
 
-	for (i = 0; i < 6; i++)
+	for (i = 0; i < PCI_STD_NUM_BARS; i++)
 		if (bars & (1 << i))
 			pci_release_region(pdev, i);
 }
@@ -3779,7 +3779,7 @@ static int __pci_request_selected_regions(struct pci_dev *pdev, int bars,
 {
 	int i;
 
-	for (i = 0; i < 6; i++)
+	for (i = 0; i < PCI_STD_NUM_BARS; i++)
 		if (bars & (1 << i))
 			if (__pci_request_region(pdev, i, res_name, excl))
 				goto err_out;
@@ -3827,7 +3827,7 @@ EXPORT_SYMBOL(pci_request_selected_regions_exclusive);
 
 void pci_release_regions(struct pci_dev *pdev)
 {
-	pci_release_selected_regions(pdev, (1 << 6) - 1);
+	pci_release_selected_regions(pdev, (1 << PCI_STD_NUM_BARS) - 1);
 }
 EXPORT_SYMBOL(pci_release_regions);
 
@@ -3846,7 +3846,8 @@ EXPORT_SYMBOL(pci_release_regions);
  */
 int pci_request_regions(struct pci_dev *pdev, const char *res_name)
 {
-	return pci_request_selected_regions(pdev, ((1 << 6) - 1), res_name);
+	return pci_request_selected_regions(pdev,
+			((1 << PCI_STD_NUM_BARS) - 1), res_name);
 }
 EXPORT_SYMBOL(pci_request_regions);
 
@@ -3868,7 +3869,7 @@ EXPORT_SYMBOL(pci_request_regions);
 int pci_request_regions_exclusive(struct pci_dev *pdev, const char *res_name)
 {
 	return pci_request_selected_regions_exclusive(pdev,
-					((1 << 6) - 1), res_name);
+				((1 << PCI_STD_NUM_BARS) - 1), res_name);
 }
 EXPORT_SYMBOL(pci_request_regions_exclusive);
 
drivers/pci/quirks.c +1 -1
index 02bdf3a0231e..51caa61e6112 100644
@@ -1810,7 +1810,7 @@ static void quirk_alder_ioapic(struct pci_dev *pdev)
 	 * The next five BARs all seem to be rubbish, so just clean
 	 * them out.
 	 */
-	for (i = 1; i < 6; i++)
+	for (i = 1; i < PCI_STD_NUM_BARS; i++)
 		memset(&pdev->resource[i], 0, sizeof(pdev->resource[i]));
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_EESSC,	quirk_alder_ioapic);
Signature · 1 line
2.21.0
#15 lore raw
In reply to Denis Efremov
Quoted 35 lines · Denis Efremov

Code that iterates over all standard PCI BARs typically uses PCI_STD_RESOURCE_END, but this is error-prone because it requires "i <= PCI_STD_RESOURCE_END" rather than something like
"i < PCI_STD_NUM_BARS". We could add such a definition and use it the same way PCI_SRIOV_NUM_BARS is used. There is already the definition PCI_BAR_COUNT for s390 only. Thus, this patchset introduces it globally.

Changes in v2:
- Reverse checks in pci_iomap_range,pci_iomap_wc_range.
- Refactor loops in vfio_pci to keep PCI_STD_RESOURCES.
- Add 2 new patches to replace the magic constant with new define.
- Split net patch in v1 to separate stmmac and dwc-xlgmac patches.

Denis Efremov (10):
PCI: Add define for the number of standard PCI BARs s390/pci: Loop using PCI_STD_NUM_BARS x86/PCI: Loop using PCI_STD_NUM_BARS
stmmac: pci: Loop using PCI_STD_NUM_BARS
net: dwc-xlgmac: Loop using PCI_STD_NUM_BARS rapidio/tsi721: Loop using PCI_STD_NUM_BARS
efifb: Loop using PCI_STD_NUM_BARS
vfio_pci: Loop using PCI_STD_NUM_BARS
PCI: hv: Use PCI_STD_NUM_BARS
PCI: Use PCI_STD_NUM_BARS

 arch/s390/include/asm/pci.h                      |  5 +----
 arch/s390/include/asm/pci_clp.h                  |  6 +++---
 arch/s390/pci/pci.c                              | 16 ++++++++--------
 arch/s390/pci/pci_clp.c                          |  6 +++---
 arch/x86/pci/common.c                            |  2 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c |  4 ++--
 drivers/net/ethernet/synopsys/dwc-xlgmac-pci.c   |  2 +-
 drivers/pci/controller/pci-hyperv.c              | 10 +++++-----
 drivers/pci/pci.c                                | 11 ++++++-----
 drivers/pci/quirks.c                             |  4 ++--
Quoted 8 lines
 drivers/rapidio/devices/tsi721.c                 |  2 +-
 drivers/vfio/pci/vfio_pci.c                      | 11 +++++++----
 drivers/vfio/pci/vfio_pci_config.c               | 10 ++++++----
 drivers/vfio/pci/vfio_pci_private.h              |  4 ++--
 drivers/video/fbdev/efifb.c                      |  2 +-
 include/linux/pci.h                              |  2 +-
 include/uapi/linux/pci_regs.h                    |  1 +
 17 files changed, 51 insertions(+), 47 deletions(-)

I've come across a few more places where this change can be made. There may be multiple instances in the same file, but only the first is shown below:

drivers/misc/pci_endpoint_test.c: for (bar = BAR_0; bar <= BAR_5; bar++) {
drivers/net/ethernet/intel/e1000/e1000_main.c: for (i = BAR_1; i <= BAR_5; i++) {
drivers/net/ethernet/intel/ixgb/ixgb_main.c: for (i = BAR_1; i <= BAR_5; i++) {
drivers/pci/controller/dwc/pci-dra7xx.c: for (bar = BAR_0; bar <= BAR_5; bar++)
drivers/pci/controller/dwc/pci-layerscape-ep.c: for (bar = BAR_0; bar <= BAR_5; bar++)
drivers/pci/controller/dwc/pcie-artpec6.c: for (bar = BAR_0; bar <= BAR_5; bar++)
drivers/pci/controller/dwc/pcie-designware-plat.c: for (bar = BAR_0; bar <= BAR_5; bar++)
drivers/pci/endpoint/functions/pci-epf-test.c: for (bar = BAR_0; bar <= BAR_5; bar++) {

include/linux/pci-epc.h:        u64     bar_fixed_size[BAR_5 + 1];
drivers/scsi/pm8001/pm8001_hwi.c:       for (bar = 0; bar < 6; bar++) {
drivers/scsi/pm8001/pm8001_init.c:      for (bar = 0; bar < 6; bar++) {
drivers/ata/sata_nv.c:  for (bar = 0; bar < 6; bar++)
drivers/video/fbdev/core/fbmem.c:       for (idx = 0, bar = 0; bar < PCI_ROM_RESOURCE; bar++) {

drivers/staging/gasket/gasket_core.c: for (i = 0; i < GASKET_NUM_BARS; i++) {
drivers/tty/serial/8250/8250_pci.c: for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { <-----------

It looks like BARs are often iterated with PCI_NUM_BAR_RESOURCES, there are a load of these too found with:

git grep PCI_ROM_RESOURCE | grep "< "

I'm happy to share patches if preferred.

Thanks,

Andrew Murray

Quoted 4 lines
Signature · 2 lines
-- 
2.21.0
#16 lore raw
Quoted 57 lines · Andrew Murray
Quoted 35 lines · Denis Efremov

Code that iterates over all standard PCI BARs typically uses PCI_STD_RESOURCE_END, but this is error-prone because it requires "i <= PCI_STD_RESOURCE_END" rather than something like
"i < PCI_STD_NUM_BARS". We could add such a definition and use it the same way PCI_SRIOV_NUM_BARS is used. There is already the definition PCI_BAR_COUNT for s390 only. Thus, this patchset introduces it globally.

Changes in v2:
- Reverse checks in pci_iomap_range,pci_iomap_wc_range.
- Refactor loops in vfio_pci to keep PCI_STD_RESOURCES.
- Add 2 new patches to replace the magic constant with new define.
- Split net patch in v1 to separate stmmac and dwc-xlgmac patches.

Denis Efremov (10):
PCI: Add define for the number of standard PCI BARs s390/pci: Loop using PCI_STD_NUM_BARS x86/PCI: Loop using PCI_STD_NUM_BARS
stmmac: pci: Loop using PCI_STD_NUM_BARS
net: dwc-xlgmac: Loop using PCI_STD_NUM_BARS rapidio/tsi721: Loop using PCI_STD_NUM_BARS
efifb: Loop using PCI_STD_NUM_BARS
vfio_pci: Loop using PCI_STD_NUM_BARS
PCI: hv: Use PCI_STD_NUM_BARS
PCI: Use PCI_STD_NUM_BARS

 arch/s390/include/asm/pci.h                      |  5 +----
 arch/s390/include/asm/pci_clp.h                  |  6 +++---
 arch/s390/pci/pci.c                              | 16 ++++++++--------
 arch/s390/pci/pci_clp.c                          |  6 +++---
 arch/x86/pci/common.c                            |  2 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c |  4 ++--
 drivers/net/ethernet/synopsys/dwc-xlgmac-pci.c   |  2 +-
 drivers/pci/controller/pci-hyperv.c              | 10 +++++-----
 drivers/pci/pci.c                                | 11 ++++++-----
 drivers/pci/quirks.c                             |  4 ++--
Quoted 8 lines
 drivers/rapidio/devices/tsi721.c                 |  2 +-
 drivers/vfio/pci/vfio_pci.c                      | 11 +++++++----
 drivers/vfio/pci/vfio_pci_config.c               | 10 ++++++----
 drivers/vfio/pci/vfio_pci_private.h              |  4 ++--
 drivers/video/fbdev/efifb.c                      |  2 +-
 include/linux/pci.h                              |  2 +-
 include/uapi/linux/pci_regs.h                    |  1 +
 17 files changed, 51 insertions(+), 47 deletions(-)

I've come across a few more places where this change can be made. There may be multiple instances in the same file, but only the first is shown below:

drivers/misc/pci_endpoint_test.c: for (bar = BAR_0; bar <= BAR_5; bar++) {
drivers/net/ethernet/intel/e1000/e1000_main.c: for (i = BAR_1; i <= BAR_5; i++) {
drivers/net/ethernet/intel/ixgb/ixgb_main.c: for (i = BAR_1; i <= BAR_5; i++) {
drivers/pci/controller/dwc/pci-dra7xx.c: for (bar = BAR_0; bar <= BAR_5; bar++)
drivers/pci/controller/dwc/pci-layerscape-ep.c: for (bar = BAR_0; bar <= BAR_5; bar++)
drivers/pci/controller/dwc/pcie-artpec6.c: for (bar = BAR_0; bar <= BAR_5; bar++)
drivers/pci/controller/dwc/pcie-designware-plat.c: for (bar = BAR_0; bar <= BAR_5; bar++)
drivers/pci/endpoint/functions/pci-epf-test.c: for (bar = BAR_0; bar <= BAR_5; bar++) {

Quoted 7 lines
include/linux/pci-epc.h:        u64     bar_fixed_size[BAR_5 + 1];
drivers/scsi/pm8001/pm8001_hwi.c:       for (bar = 0; bar < 6; bar++) {
drivers/scsi/pm8001/pm8001_init.c:      for (bar = 0; bar < 6; bar++) {
drivers/ata/sata_nv.c:  for (bar = 0; bar < 6; bar++)
drivers/video/fbdev/core/fbmem.c:       for (idx = 0, bar = 0; bar < PCI_ROM_RESOURCE; bar++) {

drivers/staging/gasket/gasket_core.c: for (i = 0; i < GASKET_NUM_BARS; i++) {
drivers/tty/serial/8250/8250_pci.c: for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { <-----------

Thanks, I agree, these look like good candidates as well.

Quoted 4 lines

It looks like BARs are often iterated with PCI_NUM_BAR_RESOURCES, there are a load of these too found with:

git grep PCI_ROM_RESOURCE | grep "< "

Good point, those are slightly questionable and I'd change those too.

Bjorn

#17 lore raw
In reply to Andrew Murray
Quoted 65 lines · Andrew Murray
Quoted 35 lines · Denis Efremov

Code that iterates over all standard PCI BARs typically uses PCI_STD_RESOURCE_END, but this is error-prone because it requires "i <= PCI_STD_RESOURCE_END" rather than something like
"i < PCI_STD_NUM_BARS". We could add such a definition and use it the same way PCI_SRIOV_NUM_BARS is used. There is already the definition PCI_BAR_COUNT for s390 only. Thus, this patchset introduces it globally.

Changes in v2:
- Reverse checks in pci_iomap_range,pci_iomap_wc_range.
- Refactor loops in vfio_pci to keep PCI_STD_RESOURCES.
- Add 2 new patches to replace the magic constant with new define.
- Split net patch in v1 to separate stmmac and dwc-xlgmac patches.

Denis Efremov (10):
PCI: Add define for the number of standard PCI BARs s390/pci: Loop using PCI_STD_NUM_BARS x86/PCI: Loop using PCI_STD_NUM_BARS
stmmac: pci: Loop using PCI_STD_NUM_BARS
net: dwc-xlgmac: Loop using PCI_STD_NUM_BARS rapidio/tsi721: Loop using PCI_STD_NUM_BARS
efifb: Loop using PCI_STD_NUM_BARS
vfio_pci: Loop using PCI_STD_NUM_BARS
PCI: hv: Use PCI_STD_NUM_BARS
PCI: Use PCI_STD_NUM_BARS

 arch/s390/include/asm/pci.h                      |  5 +----
 arch/s390/include/asm/pci_clp.h                  |  6 +++---
 arch/s390/pci/pci.c                              | 16 ++++++++--------
 arch/s390/pci/pci_clp.c                          |  6 +++---
 arch/x86/pci/common.c                            |  2 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c |  4 ++--
 drivers/net/ethernet/synopsys/dwc-xlgmac-pci.c   |  2 +-
 drivers/pci/controller/pci-hyperv.c              | 10 +++++-----
 drivers/pci/pci.c                                | 11 ++++++-----
 drivers/pci/quirks.c                             |  4 ++--
Quoted 8 lines
 drivers/rapidio/devices/tsi721.c                 |  2 +-
 drivers/vfio/pci/vfio_pci.c                      | 11 +++++++----
 drivers/vfio/pci/vfio_pci_config.c               | 10 ++++++----
 drivers/vfio/pci/vfio_pci_private.h              |  4 ++--
 drivers/video/fbdev/efifb.c                      |  2 +-
 include/linux/pci.h                              |  2 +-
 include/uapi/linux/pci_regs.h                    |  1 +
 17 files changed, 51 insertions(+), 47 deletions(-)

I've come across a few more places where this change can be made. There may be multiple instances in the same file, but only the first is shown below:

drivers/misc/pci_endpoint_test.c: for (bar = BAR_0; bar <= BAR_5; bar++) {
drivers/net/ethernet/intel/e1000/e1000_main.c: for (i = BAR_1; i <= BAR_5; i++) {
drivers/net/ethernet/intel/ixgb/ixgb_main.c: for (i = BAR_1; i <= BAR_5; i++) {
drivers/pci/controller/dwc/pci-dra7xx.c: for (bar = BAR_0; bar <= BAR_5; bar++)
drivers/pci/controller/dwc/pci-layerscape-ep.c: for (bar = BAR_0; bar <= BAR_5; bar++)
drivers/pci/controller/dwc/pcie-artpec6.c: for (bar = BAR_0; bar <= BAR_5; bar++)
drivers/pci/controller/dwc/pcie-designware-plat.c: for (bar = BAR_0; bar <= BAR_5; bar++)
drivers/pci/endpoint/functions/pci-epf-test.c: for (bar = BAR_0; bar <= BAR_5; bar++) {

include/linux/pci-epc.h:        u64     bar_fixed_size[BAR_5 + 1];
drivers/scsi/pm8001/pm8001_hwi.c:       for (bar = 0; bar < 6; bar++) {
drivers/scsi/pm8001/pm8001_init.c:      for (bar = 0; bar < 6; bar++) {
drivers/ata/sata_nv.c:  for (bar = 0; bar < 6; bar++)
drivers/video/fbdev/core/fbmem.c:       for (idx = 0, bar = 0; bar < PCI_ROM_RESOURCE; bar++) {

drivers/staging/gasket/gasket_core.c: for (i = 0; i < GASKET_NUM_BARS; i++) {
drivers/tty/serial/8250/8250_pci.c: for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { <-----------

Quoted 7 lines

It looks like BARs are often iterated with PCI_NUM_BAR_RESOURCES, there are a load of these too found with:

git grep PCI_ROM_RESOURCE | grep "< "

I'm happy to share patches if preferred.

I'm not sure about lib/devres.c
265:#define PCIM_IOMAP_MAX PCI_ROM_RESOURCE

268:    void __iomem *table[PCIM_IOMAP_MAX];
277:    for (i = 0; i < PCIM_IOMAP_MAX; i++)
324:    BUG_ON(bar >= PCIM_IOMAP_MAX);
352:    for (i = 0; i < PCIM_IOMAP_MAX; i++)
455:    for (i = 0; i < PCIM_IOMAP_MAX; i++) {

Is it worth changing?
#define PCIM_IOMAP_MAX PCI_STD_NUM_BARS

Thanks,
Denis