block: gluster: Probe alignment limits
PATCH 1/1 block: gluster: Probe alignment limits
Implement alignment probing similar to file-posix, by reading from the first 4k of the image.
Before this change, provisioning a VM on storage with sector size of 4096 bytes would fail when the installer try to create filesystems. Here is an example command that reproduces this issue:
$ qemu-system-x86_64 -accel kvm -m 2048 -smp 2 \
-drive file=gluster://gluster1/gv0/fedora29.raw,format=raw,cache=none \
-cdrom Fedora-Server-dvd-x86_64-29-1.2.isoThe installer fails in few seconds when trying to create filesystem on /dev/mapper/fedora-root. In error report we can see that it failed with EINVAL (I could not extract the error from guest).
Copying disk fails with EINVAL:
$ qemu-img convert -p -f raw -O raw -t none -T none \
gluster://gluster1/gv0/fedora29.raw \
gluster://gluster1/gv0/fedora29-clone.raw
qemu-img: error while writing sector 4190208: Invalid argumentThis is a fix to same issue fixed in commit a6b257a08e3d (file-posix:
Handle undetectable alignment) for gluster:// images.
This fix has the same limit, that the first block of the image should be allocated, otherwise we cannot detect the alignment and fallback to a safe value (4096) even when using storage with sector size of 512 bytes.
--- block/gluster.c | 47 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+)
block/gluster.c +47 -0
@@ -52,6 +52,9 @@#define GERR_INDEX_HINT "hint: check in 'server' array index '%d'\n" +/* The value is known only on the server side. */ +#define MAX_ALIGN 4096 + typedef struct GlusterAIOCB { int64_t size; int ret;
@@ -902,8 +905,52 @@ out:return ret; } +/* +* Check if read is allowed with given memory buffer and length. +* +* This function is used to check O_DIRECT request alignment. +*/ +static bool gluster_is_io_aligned (struct glfs_fd *fd,void *buf,size_t len) +{ +ssize_t ret =glfs_pread (fd, buf, len,0 ,0 ,NULL ); +return ret >=0 || errno !=EINVAL ; +} + +static void gluster_probe_alignment (BlockDriverState *bs,struct glfs_fd *fd, +Error **errp) +{ +char *buf; +size_t alignments[] = {1 ,512 ,1024 ,2048 ,4096 }; +size_t align; +int i; + + buf =qemu_memalign (MAX_ALIGN ,MAX_ALIGN ); + +for (i =0 ; i <ARRAY_SIZE (alignments); i++) { + align = alignments[i]; +if (gluster_is_io_aligned (fd, buf, align)) { +/* Fallback to safe value. */ + bs->bl.request_alignment = (align !=1 ) ? align :MAX_ALIGN ; +break ; + } + } + +qemu_vfree (buf); + +if (!bs->bl.request_alignment) { +error_setg (errp,"Could not find working O_DIRECT alignment" ); +error_append_hint (errp,"Try cache.direct=off\n" ); + } +} +static void qemu_gluster_refresh_limits (BlockDriverState *bs,Error **errp) { +BDRVGlusterState *s = bs->opaque; + +gluster_probe_alignment (bs, s->fd, errp); + + bs->bl.min_mem_alignment = bs->bl.request_alignment; + bs->bl.opt_mem_alignment =MAX (bs->bl.request_alignment,MAX_ALIGN ); bs->bl.max_transfer =GLUSTER_MAX_TRANSFER ; }
Signature · 1 line
2.20.1
Quoted 103 lines · Nir Soffer
Implement alignment probing similar to file-posix, by reading from the first 4k of the image.
Before this change, provisioning a VM on storage with sector size of 4096 bytes would fail when the installer try to create filesystems. Here is an example command that reproduces this issue:
$ qemu-system-x86_64 -accel kvm -m 2048 -smp 2 \ -drive file=gluster://gluster1/gv0/fedora29.raw,format=raw,cache=none \ -cdrom Fedora-Server-dvd-x86_64-29-1.2.isoThe installer fails in few seconds when trying to create filesystem on
/dev/mapper/fedora-root. In error report we can see that it failed with EINVAL (I could not extract the error from guest).Copying disk fails with EINVAL:
$ qemu-img convert -p -f raw -O raw -t none -T none \ gluster://gluster1/gv0/fedora29.raw \ gluster://gluster1/gv0/fedora29-clone.raw qemu-img: error while writing sector 4190208: Invalid argumentThis is a fix to same issue fixed in commit
a6b257a08e3d(file-posix:
Handle undetectable alignment) for gluster:// images.This fix has the same limit, that the first block of the image should be allocated, otherwise we cannot detect the alignment and fallback to a safe value (4096) even when using storage with sector size of 512 bytes.
Signed-off-by Nir Soffer <[email protected]>--- block/gluster.c | 47 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+)block/gluster.c +47
-0@@ -52,6 +52,9 @@#define GERR_INDEX_HINT "hint: check in 'server' array index '%d'\n" +/* The value is known only on the server side. */ +#define MAX_ALIGN 4096 + typedef struct GlusterAIOCB { int64_t size; int ret;@@ -902,8 +905,52 @@ out:return ret; } +/* +* Check if read is allowed with given memory buffer and length. +* +* This function is used to check O_DIRECT request alignment. +*/ +static bool gluster_is_io_aligned (struct glfs_fd *fd,void *buf,size_t len) +{ +ssize_t ret =glfs_pread (fd, buf, len,0 ,0 ,NULL ); +return ret >=0 || errno !=EINVAL ; +} + +static void gluster_probe_alignment (BlockDriverState *bs,struct glfs_fd *fd, +Error **errp) +{ +char *buf; +size_t alignments[] = {1 ,512 ,1024 ,2048 ,4096 }; +size_t align; +int i; + + buf =qemu_memalign (MAX_ALIGN ,MAX_ALIGN ); + +for (i =0 ; i <ARRAY_SIZE (alignments); i++) { + align = alignments[i]; +if (gluster_is_io_aligned (fd, buf, align)) { +/* Fallback to safe value. */ + bs->bl.request_alignment = (align !=1 ) ? align :MAX_ALIGN ; +break ; + } + } + +qemu_vfree (buf); + +if (!bs->bl.request_alignment) { +error_setg (errp,"Could not find working O_DIRECT alignment" ); +error_append_hint (errp,"Try cache.direct=off\n" ); + } +} +static void qemu_gluster_refresh_limits (BlockDriverState *bs,Error **errp) { +BDRVGlusterState *s = bs->opaque; + +gluster_probe_alignment (bs, s->fd, errp); + + bs->bl.min_mem_alignment = bs->bl.request_alignment; + bs->bl.opt_mem_alignment =MAX (bs->bl.request_alignment,MAX_ALIGN );bs->bl.max_transfer = GLUSTER_MAX_TRANSFER;
Quoted 6 lines
}
--
2.20.1
To debug this I added this temporary patch:
block/gluster.c +0 -0
@@ -912,6 +912,7 @@ out: static bool gluster_is_io_aligned(struct glfs_fd *fd, void *buf, size_t
len)
{
ssize_t ret = glfs_pread(fd, buf, len, 0, 0, NULL);
+ printf("gluster_is_io_aligned len=%ld ret=%ld errno=%d\n", len, ret,
errno);
return ret >= 0 || errno != EINVAL;}
@@ -940,6 +941,9 @@ static void gluster_probe_alignment(BlockDriverState *bs, struct glfs_fd *fd,
error_setg(errp, "Could not find working O_DIRECT alignment");
error_append_hint(errp, "Try cache.direct=off\n");
}+
+ printf("Probed aligment for %s request_alignment=%d\n",
+ bs->filename, bs->bl.request_alignment);
}
static void qemu_gluster_refresh_limits(BlockDriverState *bs, Error **errp)
Here is example run with volume with sector size of 512 bytes:
$ sudo mount -t glusterfs gluster1:/gv1 /tmp/gv1 $ dd if=/dev/zero bs=1M count=100 | tr "\0" "x" > /tmp/gv1/src.raw $ truncate -s 100m /tmp/gv1/dst.raw $ dd if=/dev/zero bs=1 count=1 of=/tmp/gv1/dst.raw conv=notrunc
$ ./qemu-img convert -n -f raw -O raw -t none -T none gluster://gluster1/gv1/src.raw gluster://gluster1/gv1/dst.raw gluster_is_io_aligned len=1 ret=-1 errno=22 gluster_is_io_aligned len=512 ret=512 errno=0 Probed aligment for gluster://gluster1/gv1/src.raw request_alignment=512 gluster_is_io_aligned len=1 ret=-1 errno=22 gluster_is_io_aligned len=512 ret=512 errno=0 Probed aligment for gluster://gluster1/gv1/dst.raw request_alignment=512
And with volume with sector size of 4096 bytes:
$ sudo mount -t glusterfs gluster1:/gv0 /tmp/gv0 $ dd if=/dev/zero bs=1M count=100 | tr "\0" "x" > /tmp/gv0/src.raw $ truncate -s 100m /tmp/gv0/dst.raw $ dd if=/dev/zero bs=1 count=1 of=/tmp/gv0/dst.raw conv=notrunc
$ ./qemu-img convert -n -f raw -O raw -t none -T none gluster://gluster1/gv0/src.raw gluster://gluster1/gv0/dst.raw gluster_is_io_aligned len=1 ret=-1 errno=22 gluster_is_io_aligned len=512 ret=-1 errno=22 gluster_is_io_aligned len=1024 ret=-1 errno=22 gluster_is_io_aligned len=2048 ret=-1 errno=22 gluster_is_io_aligned len=4096 ret=4096 errno=0 Probed aligment for gluster://gluster1/gv0/src.raw request_alignment=4096 gluster_is_io_aligned len=1 ret=-1 errno=22 gluster_is_io_aligned len=512 ret=-1 errno=22 gluster_is_io_aligned len=1024 ret=-1 errno=22 gluster_is_io_aligned len=2048 ret=-1 errno=22 gluster_is_io_aligned len=4096 ret=4096 errno=0 Probed aligment for gluster://gluster1/gv0/dst.raw request_alignment=4096
Quoted 51 lines · Nir Soffer
Implement alignment probing similar to file-posix, by reading from the first 4k of the image.
Before this change, provisioning a VM on storage with sector size of 4096 bytes would fail when the installer try to create filesystems. Here is an example command that reproduces this issue:
$ qemu-system-x86_64 -accel kvm -m 2048 -smp 2 \ -drive file=gluster://gluster1/gv0/fedora29.raw,format=raw,cache=none \ -cdrom Fedora-Server-dvd-x86_64-29-1.2.isoThe installer fails in few seconds when trying to create filesystem on
/dev/mapper/fedora-root. In error report we can see that it failed with EINVAL (I could not extract the error from guest).Copying disk fails with EINVAL:
$ qemu-img convert -p -f raw -O raw -t none -T none \ gluster://gluster1/gv0/fedora29.raw \ gluster://gluster1/gv0/fedora29-clone.raw qemu-img: error while writing sector 4190208: Invalid argumentThis is a fix to same issue fixed in commit
a6b257a08e3d(file-posix:
Handle undetectable alignment) for gluster:// images.This fix has the same limit, that the first block of the image should be allocated, otherwise we cannot detect the alignment and fallback to a safe value (4096) even when using storage with sector size of 512 bytes.
Signed-off-by Nir Soffer <[email protected]>--- block/gluster.c | 47 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+)block/gluster.c +3
-0@@ -52,6 +52,9 @@#define GERR_INDEX_HINT "hint: check in 'server' array index '%d'\n" +/* The value is known only on the server side. */ +#define MAX_ALIGN 4096 + typedef struct GlusterAIOCB { int64_t size; int ret;@@ -902,8 +905,52 @@ out:return ret; }
block/gluster.c out: · line 916
Quoted 10 lines
block/gluster.c +9
-0+/* +* Check if read is allowed with given memory buffer and length. +* +* This function is used to check O_DIRECT request alignment. +*/ +static bool gluster_is_io_aligned (struct glfs_fd *fd,void *buf,size_t len) +{ +ssize_t ret =glfs_pread (fd, buf, len,0 ,0 ,NULL ); +return ret >=0 || errno !=EINVAL ;
Is glfs_pread() guaranteed to return EINVAL on invalid alignment? file-posix says this is only the case on Linux (for normal files). Now I also don’t know whether the gluster driver works on anything but Linux anyway.
Quoted 10 lines
block/gluster.c +10
-0+} + +static void gluster_probe_alignment (BlockDriverState *bs,struct glfs_fd *fd, +Error **errp) +{ +char *buf; +size_t alignments[] = {1 ,512 ,1024 ,2048 ,4096 }; +size_t align; +int i; +
block/gluster.c out: · line 936
Quoted 10 lines
block/gluster.c +10
-0+ buf =qemu_memalign (MAX_ALIGN ,MAX_ALIGN ); + +for (i =0 ; i <ARRAY_SIZE (alignments); i++) { + align = alignments[i]; +if (gluster_is_io_aligned (fd, buf, align)) { +/* Fallback to safe value. */ + bs->bl.request_alignment = (align !=1 ) ? align :MAX_ALIGN ; +break ; + } + }
I don’t like the fact that the last element of alignments[] should be the same as MAX_ALIGN, without that ever having been made explicit anywhere.
It’s a bit worse in the file-posix patch, because if getpagesize() is greater than 4k, max_align will be greater than 4k. But MAX_BLOCKSIZE is 4k, too, so I suppose we wouldn’t support any block size beyond that anyway, which makes the error message appropriate still.
Quoted 6 lines
block/gluster.c +6
-0+ +qemu_vfree (buf); + +if (!bs->bl.request_alignment) { +error_setg (errp,"Could not find working O_DIRECT alignment" ); +error_append_hint (errp,"Try cache.direct=off\n" );
block/gluster.c out: · line 952
Quoted 10 lines
block/gluster.c +8
-0+ } +} +static void qemu_gluster_refresh_limits (BlockDriverState *bs,Error **errp) { +BDRVGlusterState *s = bs->opaque; + +gluster_probe_alignment (bs, s->fd, errp); + + bs->bl.min_mem_alignment = bs->bl.request_alignment;
Well, I’ll just trust you that there is no weird system where the memory alignment is greater than the request alignment.
block/gluster.c out: · line 953
Quoted 1 line
block/gluster.c +1
-0+ bs->bl.opt_mem_alignment =MAX (bs->bl.request_alignment,MAX_ALIGN );
Isn’t request_alignment guaranteed to not exceed MAX_ALIGN, i.e. isn’t this always MAX_ALIGN?
block/gluster.c out: · line 955
Quoted 2 lines
block/gluster.c +0
-0bs->bl.max_transfer =GLUSTER_MAX_TRANSFER ; }
file-posix has a check in raw_reopen_prepare() whether we can find a working alignment for the new FD. Shouldn’t we do the same in qemu_gluster_reopen_prepare()?
Max
Quoted 53 lines · Max Reitz
Quoted 52 lines · Nir Soffer
Implement alignment probing similar to file-posix, by reading from the first 4k of the image.
Before this change, provisioning a VM on storage with sector size of 4096 bytes would fail when the installer try to create filesystems. Here is an example command that reproduces this issue:
$ qemu-system-x86_64 -accel kvm -m 2048 -smp 2 \ -drive file=gluster://gluster1/gv0/fedora29.raw,format=raw,cache=none \ -cdrom Fedora-Server-dvd-x86_64-29-1.2.isoThe installer fails in few seconds when trying to create filesystem on
/dev/mapper/fedora-root. In error report we can see that it failed with EINVAL (I could not extract the error from guest).Copying disk fails with EINVAL:
$ qemu-img convert -p -f raw -O raw -t none -T none \ gluster://gluster1/gv0/fedora29.raw \ gluster://gluster1/gv0/fedora29-clone.raw qemu-img: error while writing sector 4190208: Invalid argumentThis is a fix to same issue fixed in commit
a6b257a08e3d(file-posix:
Handle undetectable alignment) for gluster:// images.This fix has the same limit, that the first block of the image should be allocated, otherwise we cannot detect the alignment and fallback to a safe value (4096) even when using storage with sector size of 512 bytes.
Signed-off-by Nir Soffer <[email protected]>--- block/gluster.c | 47 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+)block/gluster.c +3
-0@@ -52,6 +52,9 @@#define GERR_INDEX_HINT "hint: check in 'server' array index '%d'\n" +/* The value is known only on the server side. */ +#define MAX_ALIGN 4096 + typedef struct GlusterAIOCB { int64_t size; int ret;@@ -902,8 +905,52 @@ out:return ret; }
Quoted 14 lines
block/gluster.c out: · line 916
Quoted 9 lines
block/gluster.c +9
-0+/* +* Check if read is allowed with given memory buffer and length. +* +* This function is used to check O_DIRECT request alignment. +*/ +static bool gluster_is_io_aligned (struct glfs_fd *fd,void *buf,size_t len) +{ +ssize_t ret =glfs_pread (fd, buf, len,0 ,0 ,NULL ); +return ret >=0 || errno !=EINVAL ;Is
glfs_pread()guaranteed to return EINVAL on invalid alignment? file-posix says this is only the case on Linux (for normal files). Now I also don’t know whether the gluster driver works on anything but Linux anyway.
The behaviour depends on the filesystem used by the Gluster backend. XFS is the recommendation, but in the end it is up to the users. The Gluster server is known to work on Linux, NetBSD and FreeBSD, the vast majority of users runs it on Linux.
I do not think there is a strong guarantee EINVAL is always correct. How about only checking 'ret > 0'?
Quoted 55 lines
Quoted 11 lines
block/gluster.c +10
-0+} + +static void gluster_probe_alignment (BlockDriverState *bs,struct glfs_fd *fd, +Error **errp) +{ +char *buf; +size_t alignments[] = {1 ,512 ,1024 ,2048 ,4096 }; +size_t align; +int i; +block/gluster.c out: · line 936
Quoted 10 lines
block/gluster.c +10
-0+ buf =qemu_memalign (MAX_ALIGN ,MAX_ALIGN ); + +for (i =0 ; i <ARRAY_SIZE (alignments); i++) { + align = alignments[i]; +if (gluster_is_io_aligned (fd, buf, align)) { +/* Fallback to safe value. */ + bs->bl.request_alignment = (align !=1 ) ? align :MAX_ALIGN ; +break ; + } + }I don’t like the fact that the last element of alignments[] should be the same as
MAX_ALIGN, without that ever having been made explicit anywhere.It’s a bit worse in the file-posix patch, because if
getpagesize()is greater than 4k,max_alignwill be greater than 4k. ButMAX_BLOCKSIZEis 4k, too, so I suppose we wouldn’t support any block size beyond that anyway, which makes the error message appropriate still.Quoted 6 lines
block/gluster.c +6
-0+ +qemu_vfree (buf); + +if (!bs->bl.request_alignment) { +error_setg (errp,"Could not find working O_DIRECT alignment" ); +error_append_hint (errp,"Try cache.direct=off\n" );block/gluster.c out: · line 952
Quoted 10 lines
block/gluster.c +8
-0+ } +} +static void qemu_gluster_refresh_limits (BlockDriverState *bs,Error **errp) { +BDRVGlusterState *s = bs->opaque; + +gluster_probe_alignment (bs, s->fd, errp); + + bs->bl.min_mem_alignment = bs->bl.request_alignment;Well, I’ll just trust you that there is no weird system where the memory alignment is greater than the request alignment.
block/gluster.c out: · line 953
Quoted 1 line
block/gluster.c +1
-0+ bs->bl.opt_mem_alignment =MAX (bs->bl.request_alignment,MAX_ALIGN );Isn’t
request_alignmentguaranteed to not exceedMAX_ALIGN, i.e. isn’t this alwaysMAX_ALIGN?
Quoted 6 lines
block/gluster.c out: · line 955
Quoted 2 lines
block/gluster.c +0
-0bs->bl.max_transfer =GLUSTER_MAX_TRANSFER ; }file-posix has a check in
raw_reopen_prepare()whether we can find a working alignment for the new FD. Shouldn’t we do the same inqemu_gluster_reopen_prepare()?
Yes, I think that makes sense too.
Niels
Quoted 74 lines · Niels de Vos
Quoted 6 lines · Max Reitz
Quoted 5 lines · Nir Soffer
Implement alignment probing similar to file-posix, by reading from the first 4k of the image.
Before this change, provisioning a VM on storage with sector size of 4096 bytes would fail when the installer try to create filesystems.
Here
Quoted 4 lines
Quoted 4 lines
is an example command that reproduces this issue:
$ qemu-system-x86_64 -accel kvm -m 2048 -smp 2 \ -drivefile=gluster://gluster1/gv0/fedora29.raw,format=raw,cache=none \
Quoted 13 lines
Quoted 13 lines
-cdrom Fedora-Server-dvd-x86_64-29-1.2.isoThe installer fails in few seconds when trying to create filesystem on
/dev/mapper/fedora-root. In error report we can see that it failed with EINVAL (I could not extract the error from guest).Copying disk fails with EINVAL:
$ qemu-img convert -p -f raw -O raw -t none -T none \ gluster://gluster1/gv0/fedora29.raw \ gluster://gluster1/gv0/fedora29-clone.raw qemu-img: error while writing sector 4190208: Invalid argumentQuoted 4 lines
Quoted 4 lines
This is a fix to same issue fixed in commit
a6b257a08e3d(file-posix:
Handle undetectable alignment) for gluster:// images.This fix has the same limit, that the first block of the image should
be
Quoted 2 lines
Quoted 2 lines
allocated, otherwise we cannot detect the alignment and fallback to a safe value (4096) even when using storage with sector size of 512
bytes.
Quoted 24 lines
Quoted 24 lines
Signed-off-by Nir Soffer <[email protected]>--- block/gluster.c | 47 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+)block/gluster.c +3
-0@@ -52,6 +52,9 @@#define GERR_INDEX_HINT "hint: check in 'server' array index '%d'\n" +/* The value is known only on the server side. */ +#define MAX_ALIGN 4096 + typedef struct GlusterAIOCB { int64_t size; int ret;@@ -902,8 +905,52 @@ out:return ret; }Quoted 6 lines
block/gluster.c out:
Quoted 6 lines
block/gluster.c +6
-0+/* +* Check if read is allowed with given memory buffer and length. +* +* This function is used to check O_DIRECT request alignment. +*/ +static bool gluster_is_io_aligned(struct glfs_fd *fd, void *buf,
size_tlen)Quoted 8 lines
block/gluster.c out: · line 916
Quoted 3 lines
block/gluster.c +3
-0+{ +ssize_t ret =glfs_pread (fd, buf, len,0 ,0 ,NULL ); +return ret >=0 || errno !=EINVAL ;Is
glfs_pread()guaranteed to return EINVAL on invalid alignment? file-posix says this is only the case on Linux (for normal files). Now I also don’t know whether the gluster driver works on anything but Linux anyway.
Quoted 8 lines
The behaviour depends on the filesystem used by the Gluster backend. XFS is the recommendation, but in the end it is up to the users. The Gluster server is known to work on Linux, NetBSD and FreeBSD, the vast majority of users runs it on Linux.
I do not think there is a strong guarantee EINVAL is always correct. How about only checking 'ret > 0'?
Looks like we don't have a choice.
Quoted 60 lines
Quoted 4 lines
block/gluster.c out:
Quoted 4 lines
block/gluster.c +3
-0+} + +static void gluster_probe_alignment(BlockDriverState *bs, struct
glfs_fd*fd,Quoted 6 lines
Quoted 6 lines
block/gluster.c +6
-0+ Error **errp) +{ +char *buf; +size_t alignments[] = {1 ,512 ,1024 ,2048 ,4096 }; +size_t align; +int i;Quoted 8 lines
block/gluster.c out:
Quoted 8 lines
block/gluster.c +8
-0+ + buf =qemu_memalign (MAX_ALIGN ,MAX_ALIGN ); + +for (i =0 ; i <ARRAY_SIZE (alignments); i++) { + align = alignments[i]; +if (gluster_is_io_aligned (fd, buf, align)) { +/* Fallback to safe value. */ + bs->bl.request_alignment = (align != 1) ? align :
MAX_ALIGN;Quoted 6 lines
block/gluster.c out: · line 936
Quoted 3 lines
block/gluster.c +3
-0+break ; + } + }I don’t like the fact that the last element of alignments[] should be the same as
MAX_ALIGN, without that ever having been made explicitanywhere.
Quoted 6 lines
It’s a bit worse in the file-posix patch, because if
getpagesize()is greater than 4k,max_alignwill be greater than 4k. ButMAX_BLOCKSIZEis 4k, too, so I suppose we wouldn’t support any block size beyond that anyway, which makes the error message appropriate still.Quoted 10 lines
block/gluster.c out:
Quoted 10 lines
block/gluster.c +9
-0+ +qemu_vfree (buf); + +if (!bs->bl.request_alignment) { +error_setg (errp,"Could not find working O_DIRECT alignment" ); +error_append_hint (errp,"Try cache.direct=off\n" ); + } +} + static void qemu_gluster_refresh_limits(BlockDriverState *bs, Error**errp)
Quoted 11 lines
block/gluster.c out: · line 952
Quoted 6 lines
block/gluster.c +5
-0{ +BDRVGlusterState *s = bs->opaque; + +gluster_probe_alignment (bs, s->fd, errp); + + bs->bl.min_mem_alignment = bs->bl.request_alignment;Well, I’ll just trust you that there is no weird system where the memory alignment is greater than the request alignment.
Quoted 1 line
block/gluster.c +1
-0+ bs->bl.opt_mem_alignment = MAX(bs->bl.request_alignment,
MAX_ALIGN);Quoted 4 lines
Isn’t
request_alignmentguaranteed to not exceedMAX_ALIGN, i.e. isn’t this alwaysMAX_ALIGN?
Quoted 9 lines
Quoted 6 lines
block/gluster.c out: · line 955
Quoted 2 lines
block/gluster.c +0
-0bs->bl.max_transfer =GLUSTER_MAX_TRANSFER ; }file-posix has a check in
raw_reopen_prepare()whether we can find a working alignment for the new FD. Shouldn’t we do the same inqemu_gluster_reopen_prepare()?Yes, I think that makes sense too.
I'l add it in v2.
Thanks for reviewing.
Nir