Adding "UAS" protocol line to usb.ids file?

I noticed that when I use "lsusb -v" on a UAS-enabled drive enclosure, the bInterfaceProtocol line for #80/0x50 has a "protocol name" label but the one for #98/0x62 does not:

========

# lsusb -v -s2:15 | grep Interface
  bDeviceClass            0 (Defined at Interface level)
    bNumInterfaces          1
    Interface Descriptor:
      bInterfaceNumber        0
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk-Only
      iInterface              0
    Interface Descriptor:
      bInterfaceNumber        0
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     98
      iInterface              0
========

So...I was wondering if there was any particular reason that protocol 98 isn't included in the usb.ids file?

As a proof of concept I added the SCSI-subclass version of the line to the usb.ids file (see attached patch) and lsusb successfully showed a description for the #98 line as well:

========

# lsusb -v -s2:15 | grep Interface
  bDeviceClass            0 (Defined at Interface level)
    bNumInterfaces          1
    Interface Descriptor:
      bInterfaceNumber        0
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk-Only
      iInterface              0
    Interface Descriptor:
      bInterfaceNumber        0
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     98 UAS
      iInterface              0
========

(This experiment was on an Ubuntu Bionic system.)

I searched the list archives (and web in general) for previous discussion on this topic, but didn't succeed in finding this specific issue.

(I see that 62 is in fact included in the protocol list found on
https://usb-ids.gowdy.us/read/UC/08/06
, but it has an empty "name" column in that table -- and it's missing completely from the current file at
https://usb-ids.gowdy.us/usb.ids
.)

Thanks.

Nathan

p.s. If in fact it makes sense to add UAS to the file: I assume the UAS protocol doesn't apply to the UFI subclass, but I don't know off hand if it applies to the RBC subclass as well as SCSI...

@@ -18012,6 +18012,7 @@
 		00  Control/Bulk/Interrupt
 		01  Control/Bulk
 		50  Bulk-Only
+		62  UAS
 C 09  Hub
 	00  Unused
 		00  Full speed (or root) hub

No one got around to it? Feel free to submit a patch to the web site that handles these to upate it.

thanks,

greg k-h

[...]

Thanks for your reply. I did look there first, but because the "Bulk-Only" and "UAS" protocol names seem so similar but the UAS name hasn't been created for several years now, I started to wonder if there was a more complicated background story behind the situation.

Anyway, for what it's worth there was a submission for the UAS protocal name on the USB ID website in 2013 and I submitted another one a couple weeks ago, but so far both are still showing up as grey (which seems to indicate that it's still pending approval by "an admin").
https://usb-ids.gowdy.us/read/UC/08/06/62

I'll see if I can track down contact information for the admin(s) there.

Nathan