radeon: add option so DVI always respect HPD over DDC
Subsystems (2)
Dave Airlie
maintainerPATCH 1/1 radeon: add option so DVI always respect HPD over DDC
From: Dave Airlie <[email protected]>
Purelink FX-D120 (DVI over fibre extendeders) drive the HPD line low on the GPU side when the monitor side device is unplugged or loses the connection. However the GPU side device seems to cache EDID in this case. Per DVI spec the HPD line must be driven in order for EDID to be done, but we've met enough broken devices (mainly VGA->DVI convertors) that do the wrong thing with HPD that we ignore it if a DDC probe succeeds.
This patch adds an option to the radeon driver to always respect HPD on DVI connectors such that if the HPD line isn't driven then EDID isn't probed.
Signed-off-by Dave Airlie <[email protected]>
--- drivers/gpu/drm/radeon/radeon.h | 1 + drivers/gpu/drm/radeon/radeon_connectors.c | 7 +++++++ drivers/gpu/drm/radeon/radeon_drv.c | 4 ++++ 3 files changed, 12 insertions(+)
drivers/gpu/drm/radeon/radeon.h +1 -0
@@ -117,6 +117,7 @@ extern int radeon_uvd;extern int radeon_vce;extern int radeon_si_support;extern int radeon_cik_support; +extern int radeon_respect_hpd;/* * Copy from radeon_drv.h so we don't have to include both and have conflicting
drivers/gpu/drm/radeon/radeon_connectors.c +7 -0
@@ -1265,6 +1265,13 @@ radeon_dvi_detect(struct drm_connector *connector, bool force) goto exit; } +if (radeon_respect_hpd && radeon_connector->hpd.hpd !=RADEON_HPD_NONE ) { +if (!radeon_hpd_sense (rdev, radeon_connector->hpd.hpd)) { + ret = connector_status_disconnected; + goto exit; + } + } +if (radeon_connector->ddc_bus) { dret =radeon_ddc_probe (radeon_connector, false);
drivers/gpu/drm/radeon/radeon_drv.c +4 -0
@@ -207,6 +207,7 @@ int radeon_auxch = -1;int radeon_mst =0 ;int radeon_uvd =1 ;int radeon_vce =1 ; +int radeon_respect_hpd =0 ;MODULE_PARM_DESC (no_wb,"Disable AGP writeback for scratch registers" );module_param_named (no_wb, radeon_no_wb, int,0444 );
@@ -312,6 +313,9 @@ int radeon_cik_support = 1;MODULE_PARM_DESC (cik_support,"CIK support (1 = enabled (default), 0 = disabled)" );module_param_named (cik_support, radeon_cik_support, int,0444 ); +MODULE_PARM_DESC (respect_hpd,"For DVI always believe HPD" ); +module_param_named (respect_hpd, radeon_respect_hpd, int,0644 ); +static struct pci_device_id pciidlist[] = { radeon_PCI_IDS };
Signature · 6 lines
2.20.1 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel