IPMI updates for 4.3
cover IPMI updates for 4.3
These changes contain the following:
* Fixes for the IPMI watchdog pretimeout handling..
* Allow the IPMI UUID to be passed in, don't use the standard QEMU one.
* Add PCI support for IPMI interfaces. Not a lot of systems use this, but I use it often for testing, and maybe someone will need it.
* Add an SMBus IPMI interface (SSIF). This is becoming more used on ARM systems, and I use this for testing. It requires some ACPI updates for getting the SSIF into the ACPI tables.
PATCH 1/15 ipmi: Fix watchdog NMI handling
From: Corey Minyard <[email protected]>
The wrong logic was used for detection (so it wouldn't work at all) and the wrong interface was used to inject the NMI if the detection logic was correct.
--- hw/ipmi/ipmi.c | 6 +++--- hw/ipmi/ipmi_bmc_sim.c | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-)
hw/ipmi/ipmi.c +3 -3
@@ -28,9 +28,8 @@#include "qom/object_interfaces.h" #include "sysemu/runstate.h" #include "qapi/error.h" -#include "qapi/qapi-commands-misc.h" -#include "qapi/visitor.h" #include "qemu/module.h" +#include "hw/nmi.h" static uint32_t ipmi_current_uuid =1 ;
@@ -60,7 +59,8 @@ static int ipmi_do_hw_op(IPMIInterface *s, enum ipmi_op op, int checkonly)if (checkonly) {return 0 ; } -qmp_inject_nmi (NULL ); +/* We don't care what CPU we use. */ +nmi_monitor_handle (0 ,NULL );return 0 ;case IPMI_SHUTDOWN_VIA_ACPI_OVERTEMP :
hw/ipmi/ipmi_bmc_sim.c +1 -1
@@ -1194,7 +1194,7 @@ static void set_watchdog_timer(IPMIBmcSim *ibs,break ;case IPMI_BMC_WATCHDOG_PRE_NMI : -if (!k->do_hw_op (s,IPMI_SEND_NMI ,1 )) { +if (k->do_hw_op (s,IPMI_SEND_NMI ,1 )) {/* NMI not supported. */ rsp_buffer_set_error (rsp,IPMI_CC_INVALID_DATA_FIELD );return ;
Signature · 1 line
2.17.1
PATCH 2/15 ipmi: Fix the get watchdog command
In reply to [email protected]From: Corey Minyard <[email protected]>
It wasn't returning the set timeout like it should have been.
--- hw/ipmi/ipmi_bmc_sim.c | 2 ++ 1 file changed, 2 insertions(+)
hw/ipmi/ipmi_bmc_sim.c +2 -0
@@ -1228,6 +1228,8 @@ static void get_watchdog_timer(IPMIBmcSim *ibs,rsp_buffer_push (rsp, ibs->watchdog_action);rsp_buffer_push (rsp, ibs->watchdog_pretimeout);rsp_buffer_push (rsp, ibs->watchdog_expired); +rsp_buffer_push (rsp, ibs->watchdog_timeout &0xff ); +rsp_buffer_push (rsp, (ibs->watchdog_timeout >>8 ) &0xff );if (ibs->watchdog_running) {long timeout; timeout = ((ibs->watchdog_expiry - ipmi_getmonotime() + 50000000)
Signature · 1 line
2.17.1
PATCH 3/15 ipmi: Generate an interrupt on watchdog pretimeout expiry
In reply to [email protected]From: Corey Minyard <[email protected]>
Add the watchdog pretimeout to the bits that cause an interrupt on attn. Otherwise the user won't know.
--- hw/ipmi/ipmi_bmc_sim.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
hw/ipmi/ipmi_bmc_sim.c +3 -1
@@ -477,7 +477,9 @@ static int attn_set(IPMIBmcSim *ibs)static int attn_irq_enabled (IPMIBmcSim *ibs) { -return (IPMI_BMC_MSG_INTS_ON (ibs) &&IPMI_BMC_MSG_FLAG_RCV_MSG_QUEUE_SET (ibs)) +return (IPMI_BMC_MSG_INTS_ON (ibs) && + (IPMI_BMC_MSG_FLAG_RCV_MSG_QUEUE_SET (ibs) || +IPMI_BMC_MSG_FLAG_WATCHDOG_TIMEOUT_MASK_SET (ibs))) || (IPMI_BMC_EVBUF_FULL_INT_ENABLED (ibs) &&IPMI_BMC_MSG_FLAG_EVT_BUF_FULL_SET (ibs)); }
Signature · 1 line
2.17.1
PATCH 4/15 tests:ipmi: Fix IPMI BT tests
In reply to [email protected]From: Corey Minyard <[email protected]>
The IPMI BT tests had a race condition, if it receive an IPMI command to enable interrupt, it would write the message to enable interrupts after it wrote the command response. So the test code could receive the command response and issue the next command before the device handled the interrupt enable command, and thus no interrupt.
So send the message to enable interrupt before the command response.
Also add some sleeps to give qemu time to handle responses, there was no delay before, and it could result in an invalid timeout.
And re-enable the tests, as hopefully they are fixed now.
Note that I was unable to reproduce this even with the instructions Peter gave me, but hopefully this fixes the issue.
--- tests/Makefile.include | 3 +-- tests/ipmi-bt-test.c | 4 +++- 2 files changed, 4 insertions(+), 3 deletions(-)
tests/Makefile.include +1 -2
@@ -169,8 +169,7 @@ check-qtest-i386-$(CONFIG_SGA) += tests/boot-serial-test$(EXESUF) check-qtest-i386-$(CONFIG_SLIRP) += tests/pxe-test$(EXESUF) check-qtest-i386-y += tests/rtc-test$(EXESUF) check-qtest-i386-$(CONFIG_ISA_IPMI_KCS) += tests/ipmi-kcs-test$(EXESUF) -# Disabled temporarily as it fails intermittently especially under NetBSD VM -# check-qtest-i386-$(CONFIG_ISA_IPMI_BT) += tests/ipmi-bt-test$(EXESUF) +check-qtest-i386-$(CONFIG_ISA_IPMI_BT) += tests/ipmi-bt-test$(EXESUF) check-qtest-i386-y += tests/i440fx-test$(EXESUF) check-qtest-i386-y += tests/fw_cfg-test$(EXESUF) check-qtest-i386-y += tests/device-plug-test$(EXESUF)
tests/ipmi-bt-test.c +3 -1
@@ -99,6 +99,7 @@ static void bt_wait_b_busy(void)unsigned int count =1000 ;while (IPMI_BT_CTLREG_GET_B_BUSY () !=0 ) {g_assert (--count !=0 ); +usleep (100 ); } }
@@ -107,6 +108,7 @@ static void bt_wait_b2h_atn(void)unsigned int count =1000 ;while (IPMI_BT_CTLREG_GET_B2H_ATN () ==0 ) {g_assert (--count !=0 ); +usleep (100 ); } }
@@ -240,13 +242,13 @@ static void emu_msg_handler(void)write_emu_msg (msg, msg_len); }else if ((msg[1 ] == set_bmc_globals_cmd[0 ]) && (msg[2 ] == set_bmc_globals_cmd[1 ])) { +write_emu_msg (enable_irq_cmd,sizeof (enable_irq_cmd));memcpy (msg +1 , set_bmc_globals_rsp,sizeof (set_bmc_globals_rsp)); msg_len =sizeof (set_bmc_globals_rsp) +1 ; msg[msg_len] = -ipmb_checksum (msg, msg_len,0 ); msg_len++; msg[msg_len++] =0xa0 ;write_emu_msg (msg, msg_len); -write_emu_msg (enable_irq_cmd,sizeof (enable_irq_cmd)); }else {g_assert (0 ); }
Signature · 1 line
2.17.1
PATCH 5/15 qdev: Add a no default uuid property
In reply to [email protected]From: Corey Minyard <[email protected]>
This is for IPMI, which will behave differently if the UUID is not set.
--- include/hw/qdev-properties.h | 7 +++++++ 1 file changed, 7 insertions(+)
include/hw/qdev-properties.h +7 -0
@@ -235,6 +235,13 @@ extern const PropertyInfo qdev_prop_pcie_link_width; .set_default = true, \ } +#define DEFINE_PROP_UUID_NODEFAULT (_name, _state, _field) { \ + .name = (_name), \ + .info = &qdev_prop_uuid, \ + .offset = offsetof(_state, _field) \ + + type_check(QemuUUID, typeof_field(_state, _field)), \ + } +#define DEFINE_PROP_END_OF_LIST () \ {}
Signature · 1 line
2.17.1
PATCH 6/15 ipmi: Add a UUID device property
In reply to [email protected]From: Corey Minyard <[email protected]>
Using the UUID that qemu generates probably isn't the best thing to do, allow it to be passed in via properties, and use QemuUUID for the type.
If the UUID is not set, return an unsupported command error. This way we are not providing an all-zero (or randomly generated) GUID to the IPMI user. This lets the host fall back to the other method of using the get device id command to determind the BMC being accessed.
--- hw/ipmi/ipmi_bmc_sim.c | 22 ++++++++++++++-------- qemu-options.hx | 10 +++++++--- 2 files changed, 21 insertions(+), 11 deletions(-)
hw/ipmi/ipmi_bmc_sim.c +14 -8
@@ -223,7 +223,7 @@ struct IPMIBmcSim {uint8_t restart_cause;uint8_t acpi_power_state[2 ]; -uint8_t uuid[16 ]; +QemuUUID uuid;IPMISel sel;IPMISdr sdr;
@@ -941,8 +941,19 @@ static void get_device_guid(IPMIBmcSim *ibs, {unsigned int i; +/* An uninitialized uuid is all zeros, use that to know if it is set. */ for (i =0 ; i <16 ; i++) { -rsp_buffer_push (rsp, ibs->uuid[i]); +if (ibs->uuid.data[i]) { + goto uuid_set; + } + } +/* No uuid is set, return an error. */ +rsp_buffer_set_error (rsp,IPMI_CC_INVALID_CMD ); +return ; + + uuid_set: +for (i =0 ; i <16 ; i++) { +rsp_buffer_push (rsp, ibs->uuid.data[i]); } }
@@ -1986,12 +1997,6 @@ static void ipmi_sim_realize(DeviceState *dev, Error **errp) ibs->acpi_power_state[0 ] =0 ; ibs->acpi_power_state[1 ] =0 ; -if (qemu_uuid_set) { -memcpy (&ibs->uuid, &qemu_uuid,16 ); - }else { -memset (&ibs->uuid,0 ,16 ); - } -ipmi_init_sensors_from_sdrs (ibs);register_cmds (ibs);
@@ -2011,6 +2016,7 @@ static Property ipmi_sim_properties[] = {DEFINE_PROP_UINT8 ("fwrev2" , IPMIBmcSim, fwrev2,0 ),DEFINE_PROP_UINT32 ("mfg_id" , IPMIBmcSim, mfg_id,0 ),DEFINE_PROP_UINT16 ("product_id" , IPMIBmcSim, product_id,0 ), +DEFINE_PROP_UUID_NODEFAULT ("guid" , IPMIBmcSim, uuid), DEFINE_PROP_END_OF_LIST(), };
qemu-options.hx +7 -3
@@ -701,7 +701,7 @@ possible drivers and properties, use @code{-device help} and @code{-device @var{driver},help}. Some drivers are: -@item -device ipmi-bmc-sim,id=@var{id}[,slave_addr=@var{val}][,sdrfile=@var{file}][,furareasize=@var{val}][,furdatafile=@var{file}] +@item -device ipmi-bmc-sim,id=@var{id}[,slave_addr=@var{val}][,sdrfile=@var{file}][,furareasize=@var{val}][,furdatafile=@var{file}][,guid=@var{uuid}] Add an IPMI BMC. This is a simulation of a hardware management interface processor that normally sits on a system. It provides
@@ -714,8 +714,8 @@ controllers. If you don't know what this means, it is safe to ignore it. @table @option -@item bmc=@var{id} -The BMC to connect to, one of ipmi-bmc-sim or ipmi-bmc-extern above. +@item id=@var{id} +The BMC id for interfaces to use this device. @item slave_addr=@var{val} Define slave address to use for the BMC. The default is 0x20. @item sdrfile=@var{file}
@@ -724,6 +724,10 @@ file containing raw Sensor Data Records (SDR) data. The default is none. size of a Field Replaceable Unit (FRU) area. The default is 1024. @item frudatafile=@var{file} file containing raw Field Replaceable Unit (FRU) inventory data. The default is none. +@item guid=@var{uuid} +value for the GUID for the BMC, in standard UUID format. If this is set, +get "Get GUID" command to the BMC will return it. Otherwise "Get GUID" +will return an error. @end table @item -device ipmi-bmc-extern,id=@var{id},chardev=@var{id}[,slave_addr=@var{val}]
Signature · 1 line
2.17.1
PATCH 7/15 ipmi: Split out KCS-specific code from ISA KCS code
In reply to [email protected]From: Corey Minyard <[email protected]>
Get ready for PCI and other KCS interfaces.
No functional changes, just split the code into the generic KCS code and the ISA-specific code.
--- hw/ipmi/Makefile.objs | 2 +- hw/ipmi/ipmi_kcs.c | 408 ++++++++++++++++++++++++++++++++++++ hw/ipmi/isa_ipmi_kcs.c | 417 ++----------------------------------- include/hw/ipmi/ipmi_kcs.h | 75 +++++++ 4 files changed, 505 insertions(+), 397 deletions(-) create mode 100644 hw/ipmi/ipmi_kcs.c create mode 100644 include/hw/ipmi/ipmi_kcs.h
hw/ipmi/Makefile.objs +1 -1
@@ -1,4 +1,4 @@ -common-obj-$(CONFIG_IPMI) += ipmi.o +common-obj-$(CONFIG_IPMI) += ipmi.o ipmi_kcs.o common-obj-$(CONFIG_IPMI_LOCAL) += ipmi_bmc_sim.o common-obj-$(CONFIG_IPMI_EXTERN) += ipmi_bmc_extern.o common-obj-$(CONFIG_ISA_IPMI_KCS) += isa_ipmi_kcs.o
hw/ipmi/ipmi_kcs.c new file +408 -0
408 lines not on this page · raw message
hw/ipmi/isa_ipmi_kcs.c +21 -396
482 lines not on this page · raw message
include/hw/ipmi/ipmi_kcs.h new file +75 -0
75 lines not on this page · raw message
Signature · 1 line
2.17.1
Re: [Qemu-devel] [PATCH 07/15] ipmi: Split out KCS-specific code from ISA KCS code
Quoted 8 lines · On 8/19/19 10:16 PM, [email protected] wrote:
From: Corey Minyard <[email protected]>
Get ready for PCI and other KCS interfaces.
No functional changes, just split the code into the generic KCS code and the ISA-specific code.
Signed-off-by Corey Minyard <[email protected]>
Quoted 1,007 lines
--- hw/ipmi/Makefile.objs | 2 +- hw/ipmi/ipmi_kcs.c | 408 ++++++++++++++++++++++++++++++++++++ hw/ipmi/isa_ipmi_kcs.c | 417 ++----------------------------------- include/hw/ipmi/ipmi_kcs.h | 75 +++++++ 4 files changed, 505 insertions(+), 397 deletions(-) create mode 100644 hw/ipmi/ipmi_kcs.c create mode 100644 include/hw/ipmi/ipmi_kcs.hhw/ipmi/Makefile.objs +1
-1@@ -1,4 +1,4 @@ -common-obj-$(CONFIG_IPMI) += ipmi.o +common-obj-$(CONFIG_IPMI) += ipmi.o ipmi_kcs.o common-obj-$(CONFIG_IPMI_LOCAL) += ipmi_bmc_sim.o common-obj-$(CONFIG_IPMI_EXTERN) += ipmi_bmc_extern.o common-obj-$(CONFIG_ISA_IPMI_KCS) += isa_ipmi_kcs.ohw/ipmi/ipmi_kcs.c new file +408
-0@@ -0,0 +1,408 @@ +/* +* QEMU IPMI KCS emulation +* +* Copyright (c) 2015,2017 Corey Minyard, MontaVista Software, LLC +* +* Permission is hereby granted, free of charge, to any person obtaining a copy +* of this software and associated documentation files (the "Software"), to deal +* in the Software without restriction, including without limitation the rights +* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +* copies of the Software, and to permit persons to whom the Software is +* furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in +* all copies or substantial portions of the Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN +* THE SOFTWARE. +*/ +#include "qemu/osdep.h" +#include "migration/vmstate.h" +#include "qemu/log.h" +#include "qapi/error.h" +#include "hw/ipmi/ipmi_kcs.h" + +#define IPMI_KCS_OBF_BIT 0 +#define IPMI_KCS_IBF_BIT 1 +#define IPMI_KCS_SMS_ATN_BIT 2 +#define IPMI_KCS_CD_BIT 3 + +#define IPMI_KCS_OBF_MASK (1 << IPMI_KCS_OBF_BIT) +#define IPMI_KCS_GET_OBF (d) (((d) >> IPMI_KCS_OBF_BIT) & 0x1) +#define IPMI_KCS_SET_OBF (d, v) (d) = (((d) & ~IPMI_KCS_OBF_MASK) | \ + (((v) & 1) << IPMI_KCS_OBF_BIT)) +#define IPMI_KCS_IBF_MASK (1 << IPMI_KCS_IBF_BIT) +#define IPMI_KCS_GET_IBF (d) (((d) >> IPMI_KCS_IBF_BIT) & 0x1) +#define IPMI_KCS_SET_IBF (d, v) (d) = (((d) & ~IPMI_KCS_IBF_MASK) | \ + (((v) & 1) << IPMI_KCS_IBF_BIT)) +#define IPMI_KCS_SMS_ATN_MASK (1 << IPMI_KCS_SMS_ATN_BIT) +#define IPMI_KCS_GET_SMS_ATN (d) (((d) >> IPMI_KCS_SMS_ATN_BIT) & 0x1) +#define IPMI_KCS_SET_SMS_ATN (d, v) (d) = (((d) & ~IPMI_KCS_SMS_ATN_MASK) | \ + (((v) & 1) << IPMI_KCS_SMS_ATN_BIT)) +#define IPMI_KCS_CD_MASK (1 << IPMI_KCS_CD_BIT) +#define IPMI_KCS_GET_CD (d) (((d) >> IPMI_KCS_CD_BIT) & 0x1) +#define IPMI_KCS_SET_CD (d, v) (d) = (((d) & ~IPMI_KCS_CD_MASK) | \ + (((v) & 1) << IPMI_KCS_CD_BIT)) + +#define IPMI_KCS_IDLE_STATE 0 +#define IPMI_KCS_READ_STATE 1 +#define IPMI_KCS_WRITE_STATE 2 +#define IPMI_KCS_ERROR_STATE 3 + +#define IPMI_KCS_GET_STATE (d) (((d) >> 6) & 0x3) +#define IPMI_KCS_SET_STATE (d, v) ((d) = ((d) & ~0xc0) | (((v) & 0x3) << 6)) + +#define IPMI_KCS_ABORT_STATUS_CMD 0x60 +#define IPMI_KCS_WRITE_START_CMD 0x61 +#define IPMI_KCS_WRITE_END_CMD 0x62 +#define IPMI_KCS_READ_CMD 0x68 + +#define IPMI_KCS_STATUS_NO_ERR 0x00 +#define IPMI_KCS_STATUS_ABORTED_ERR 0x01 +#define IPMI_KCS_STATUS_BAD_CC_ERR 0x02 +#define IPMI_KCS_STATUS_LENGTH_ERR 0x06 + +static void ipmi_kcs_raise_irq (IPMIKCS *ik) +{ +if (ik->use_irq && ik->irqs_enabled && ik->raise_irq) { + ik->raise_irq (ik); + } +} + +static void ipmi_kcs_lower_irq (IPMIKCS *ik) +{ +if (ik->lower_irq) { + ik->lower_irq (ik); + } +} + +#define SET_OBF () \ + do { \ + IPMI_KCS_SET_OBF(ik->status_reg, 1); \ + if (!ik->obf_irq_set) { \ + ik->obf_irq_set = 1; \ + if (!ik->atn_irq_set) { \ + ipmi_kcs_raise_irq(ik); \ + } \ + } \ + } while (0) + +static void ipmi_kcs_signal (IPMIKCS *ik,IPMIInterface *ii) +{ +IPMIInterfaceClass *iic =IPMI_INTERFACE_GET_CLASS (ii); + + ik->do_wake =1 ; +while (ik->do_wake) { + ik->do_wake =0 ; + iic->handle_if_event (ii); + } +} + +static void ipmi_kcs_handle_event (IPMIInterface *ii) +{ +IPMIInterfaceClass *iic =IPMI_INTERFACE_GET_CLASS (ii); +IPMIKCS *ik = iic->get_backend_data (ii); + +if (ik->cmd_reg ==IPMI_KCS_ABORT_STATUS_CMD ) { +if (IPMI_KCS_GET_STATE (ik->status_reg) !=IPMI_KCS_ERROR_STATE ) { + ik->waiting_rsp++;/* Invalidate the message */ + ik->outmsg[0 ] =IPMI_KCS_STATUS_ABORTED_ERR ; + ik->outlen =1 ; + ik->outpos =0 ; +IPMI_KCS_SET_STATE (ik->status_reg,IPMI_KCS_ERROR_STATE ); +SET_OBF (); + } + goto out; + } + +switch (IPMI_KCS_GET_STATE (ik->status_reg)) { +case IPMI_KCS_IDLE_STATE : +if (ik->cmd_reg ==IPMI_KCS_WRITE_START_CMD ) { +IPMI_KCS_SET_STATE (ik->status_reg,IPMI_KCS_WRITE_STATE ); + ik->cmd_reg =-1 ; + ik->write_end =0 ; + ik->inlen =0 ; +SET_OBF (); + } +break ; + +case IPMI_KCS_READ_STATE : + handle_read: +if (ik->outpos >= ik->outlen) { +IPMI_KCS_SET_STATE (ik->status_reg,IPMI_KCS_IDLE_STATE ); +SET_OBF (); + }else if (ik->data_in_reg ==IPMI_KCS_READ_CMD ) { + ik->data_out_reg = ik->outmsg[ik->outpos]; + ik->outpos++; +SET_OBF (); + }else { + ik->outmsg[0 ] =IPMI_KCS_STATUS_BAD_CC_ERR ; + ik->outlen =1 ; + ik->outpos =0 ; +IPMI_KCS_SET_STATE (ik->status_reg,IPMI_KCS_ERROR_STATE ); +SET_OBF (); + goto out; + } +break ; + +case IPMI_KCS_WRITE_STATE : +if (ik->data_in_reg !=-1 ) { +/* +* Don't worry about input overrun here, that will be +* handled in the BMC. +*/ +if (ik->inlen <sizeof (ik->inmsg)) { + ik->inmsg[ik->inlen] = ik->data_in_reg; + } + ik->inlen++; + } +if (ik->write_end) { +IPMIBmcClass *bk =IPMI_BMC_GET_CLASS (ik->bmc); + ik->outlen =0 ; + ik->write_end =0 ; + ik->outpos =0 ; + bk->handle_command (ik->bmc, ik->inmsg, ik->inlen,sizeof (ik->inmsg), + ik->waiting_rsp); + goto out_noibf; + }else if (ik->cmd_reg ==IPMI_KCS_WRITE_END_CMD ) { + ik->cmd_reg =-1 ; + ik->write_end =1 ; + } +SET_OBF (); +break ; + +case IPMI_KCS_ERROR_STATE : +if (ik->data_in_reg !=-1 ) { +IPMI_KCS_SET_STATE (ik->status_reg,IPMI_KCS_READ_STATE ); + ik->data_in_reg =IPMI_KCS_READ_CMD ; + goto handle_read; + } +break ; + } + +if (ik->cmd_reg !=-1 ) { +/* Got an invalid command */ + ik->outmsg[0 ] =IPMI_KCS_STATUS_BAD_CC_ERR ; + ik->outlen =1 ; + ik->outpos =0 ; +IPMI_KCS_SET_STATE (ik->status_reg,IPMI_KCS_ERROR_STATE ); + } + + out: + ik->cmd_reg =-1 ; + ik->data_in_reg =-1 ; +IPMI_KCS_SET_IBF (ik->status_reg,0 ); + out_noibf: +return ; +} + +static void ipmi_kcs_handle_rsp (IPMIInterface *ii,uint8_t msg_id, +unsigned char *rsp,unsigned int rsp_len) +{ +IPMIInterfaceClass *iic =IPMI_INTERFACE_GET_CLASS (ii); +IPMIKCS *ik = iic->get_backend_data (ii); + +if (ik->waiting_rsp == msg_id) { + ik->waiting_rsp++; +if (rsp_len >sizeof (ik->outmsg)) { + ik->outmsg[0 ] = rsp[0 ]; + ik->outmsg[1 ] = rsp[1 ]; + ik->outmsg[2 ] =IPMI_CC_CANNOT_RETURN_REQ_NUM_BYTES ; + ik->outlen =3 ; + }else { +memcpy (ik->outmsg, rsp, rsp_len); + ik->outlen = rsp_len; + } +IPMI_KCS_SET_STATE (ik->status_reg,IPMI_KCS_READ_STATE ); + ik->data_in_reg =IPMI_KCS_READ_CMD ; +ipmi_kcs_signal (ik, ii); + } +} + + +static uint64_t ipmi_kcs_ioport_read (void *opaque,hwaddr addr,unsigned size) +{ +IPMIInterface *ii = opaque; +IPMIInterfaceClass *iic =IPMI_INTERFACE_GET_CLASS (ii); +IPMIKCS *ik = iic->get_backend_data (ii); +uint32_t ret; + +switch (addr &1 ) { +case 0 : + ret = ik->data_out_reg; +IPMI_KCS_SET_OBF (ik->status_reg,0 ); +if (ik->obf_irq_set) { + ik->obf_irq_set =0 ; +if (!ik->atn_irq_set) { +ipmi_kcs_lower_irq (ik); + } + } +break ; +case 1 : + ret = ik->status_reg; +if (ik->atn_irq_set) { + ik->atn_irq_set =0 ; +if (!ik->obf_irq_set) { +ipmi_kcs_lower_irq (ik); + } + } +break ; + } +return ret; +} + +static void ipmi_kcs_ioport_write (void *opaque,hwaddr addr,uint64_t val, +unsigned size) +{ +IPMIInterface *ii = opaque; +IPMIInterfaceClass *iic =IPMI_INTERFACE_GET_CLASS (ii); +IPMIKCS *ik = iic->get_backend_data (ii); + +if (IPMI_KCS_GET_IBF (ik->status_reg)) { +return ; + } + +switch (addr &1 ) { +case 0 : + ik->data_in_reg = val; +break ; + +case 1 : + ik->cmd_reg = val; +break ; + } +IPMI_KCS_SET_IBF (ik->status_reg,1 ); +ipmi_kcs_signal (ik, ii); +} + +const MemoryRegionOps ipmi_kcs_io_ops = { + .read = ipmi_kcs_ioport_read, + .write = ipmi_kcs_ioport_write, + .impl = { + .min_access_size =1 , + .max_access_size =1 , + }, + .endianness =DEVICE_LITTLE_ENDIAN , +}; + +static void ipmi_kcs_set_atn (IPMIInterface *ii,int val,int irq) +{ +IPMIInterfaceClass *iic =IPMI_INTERFACE_GET_CLASS (ii); +IPMIKCS *ik = iic->get_backend_data (ii); + +IPMI_KCS_SET_SMS_ATN (ik->status_reg, val); +if (val) { +if (irq && !ik->atn_irq_set) { + ik->atn_irq_set =1 ; +if (!ik->obf_irq_set) { +ipmi_kcs_raise_irq (ik); + } + } + }else { +if (ik->atn_irq_set) { + ik->atn_irq_set =0 ; +if (!ik->obf_irq_set) { +ipmi_kcs_lower_irq (ik); + } + } + } +} + +static void ipmi_kcs_set_irq_enable (IPMIInterface *ii,int val) +{ +IPMIInterfaceClass *iic =IPMI_INTERFACE_GET_CLASS (ii); +IPMIKCS *ik = iic->get_backend_data (ii); + + ik->irqs_enabled = val; +} + +static void ipmi_kcs_init (IPMIInterface *ii,Error **errp) +{ +IPMIInterfaceClass *iic =IPMI_INTERFACE_GET_CLASS (ii); +IPMIKCS *ik = iic->get_backend_data (ii); + + ik->io_length =2 ; +memory_region_init_io (&ik->io,NULL , &ipmi_kcs_io_ops, ii,"ipmi-kcs" ,2 ); +} + +int ipmi_kcs_vmstate_post_load (void *opaque,int version) +{ +IPMIKCS *ik = opaque; + +/* Make sure all the values are sane. */ +if (ik->outpos >=MAX_IPMI_MSG_SIZE || ik->outlen >=MAX_IPMI_MSG_SIZE || + ik->outpos >= ik->outlen) { +qemu_log_mask (LOG_GUEST_ERROR , +"ipmi:kcs: vmstate transfer received bad out values: %d %d\n" , + ik->outpos, ik->outlen); + ik->outpos =0 ; + ik->outlen =0 ; + } + +if (ik->inlen >=MAX_IPMI_MSG_SIZE ) { +qemu_log_mask (LOG_GUEST_ERROR , +"ipmi:kcs: vmstate transfer received bad in value: %d\n" , + ik->inlen); + ik->inlen =0 ; + } + +return 0 ; +} + +static bool vmstate_kcs_before_version2 (void *opaque,int version) +{ +return version <=1 ; +} + +const VMStateDescription vmstate_IPMIKCS = { + .name =TYPE_IPMI_INTERFACE_PREFIX "kcs" , + .version_id =2 , + .minimum_version_id =1 , + .post_load = ipmi_kcs_vmstate_post_load, + .fields = (VMStateField []) { +VMSTATE_BOOL (obf_irq_set,IPMIKCS ), +VMSTATE_BOOL (atn_irq_set,IPMIKCS ), +VMSTATE_UNUSED_TEST (vmstate_kcs_before_version2,1 ),/* Was use_irq */ +VMSTATE_BOOL (irqs_enabled,IPMIKCS ), +VMSTATE_UINT32 (outpos,IPMIKCS ), +VMSTATE_UINT32_V (outlen,IPMIKCS ,2 ), +VMSTATE_UINT8_ARRAY (outmsg,IPMIKCS ,MAX_IPMI_MSG_SIZE ), +VMSTATE_UINT32_V (inlen,IPMIKCS ,2 ), +VMSTATE_UINT8_ARRAY (inmsg,IPMIKCS ,MAX_IPMI_MSG_SIZE ), +VMSTATE_BOOL (write_end,IPMIKCS ), +VMSTATE_UINT8 (status_reg,IPMIKCS ), +VMSTATE_UINT8 (data_out_reg,IPMIKCS ), +VMSTATE_INT16 (data_in_reg,IPMIKCS ), +VMSTATE_INT16 (cmd_reg,IPMIKCS ), +VMSTATE_UINT8 (waiting_rsp,IPMIKCS ), +VMSTATE_END_OF_LIST () + } +}; + +void ipmi_kcs_get_fwinfo (IPMIKCS *ik,IPMIFwInfo *info) +{ + info->interface_name ="kcs" ; + info->interface_type =IPMI_SMBIOS_KCS ; + info->ipmi_spec_major_revision =2 ; + info->ipmi_spec_minor_revision =0 ; + info->base_address = ik->io_base; + info->i2c_slave_address = ik->bmc->slave_addr; + info->register_length = ik->io_length; + info->register_spacing =1 ; + info->memspace =IPMI_MEMSPACE_IO ; + info->irq_type =IPMI_LEVEL_IRQ ; +} + +void ipmi_kcs_class_init (IPMIInterfaceClass *iic) +{ + iic->init = ipmi_kcs_init; + iic->set_atn = ipmi_kcs_set_atn; + iic->handle_rsp = ipmi_kcs_handle_rsp; + iic->handle_if_event = ipmi_kcs_handle_event; + iic->set_irq_enable = ipmi_kcs_set_irq_enable; +}hw/ipmi/isa_ipmi_kcs.c +21
-396@@ -1,7 +1,7 @@/* * QEMU ISA IPMI KCS emulation * -* Copyright (c) 2015 Corey Minyard, MontaVista Software, LLC +* Copyright (c) 2015,2017 Corey Minyard, MontaVista Software, LLC * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal @@ -26,338 +26,12 @@#include "qemu/log.h" #include "qemu/module.h" #include "qapi/error.h" -#include "hw/ipmi/ipmi.h" #include "hw/irq.h" +#include "hw/ipmi/ipmi_kcs.h" #include "hw/isa/isa.h" #include "hw/qdev-properties.h" #include "migration/vmstate.h" -#define IPMI_KCS_OBF_BIT 0 -#define IPMI_KCS_IBF_BIT 1 -#define IPMI_KCS_SMS_ATN_BIT 2 -#define IPMI_KCS_CD_BIT 3 - -#define IPMI_KCS_OBF_MASK (1 << IPMI_KCS_OBF_BIT) -#define IPMI_KCS_GET_OBF (d) (((d) >> IPMI_KCS_OBF_BIT) & 0x1) -#define IPMI_KCS_SET_OBF (d, v) (d) = (((d) & ~IPMI_KCS_OBF_MASK) | \ - (((v) & 1) << IPMI_KCS_OBF_BIT)) -#define IPMI_KCS_IBF_MASK (1 << IPMI_KCS_IBF_BIT) -#define IPMI_KCS_GET_IBF (d) (((d) >> IPMI_KCS_IBF_BIT) & 0x1) -#define IPMI_KCS_SET_IBF (d, v) (d) = (((d) & ~IPMI_KCS_IBF_MASK) | \ - (((v) & 1) << IPMI_KCS_IBF_BIT)) -#define IPMI_KCS_SMS_ATN_MASK (1 << IPMI_KCS_SMS_ATN_BIT) -#define IPMI_KCS_GET_SMS_ATN (d) (((d) >> IPMI_KCS_SMS_ATN_BIT) & 0x1) -#define IPMI_KCS_SET_SMS_ATN (d, v) (d) = (((d) & ~IPMI_KCS_SMS_ATN_MASK) | \ - (((v) & 1) << IPMI_KCS_SMS_ATN_BIT)) -#define IPMI_KCS_CD_MASK (1 << IPMI_KCS_CD_BIT) -#define IPMI_KCS_GET_CD (d) (((d) >> IPMI_KCS_CD_BIT) & 0x1) -#define IPMI_KCS_SET_CD (d, v) (d) = (((d) & ~IPMI_KCS_CD_MASK) | \ - (((v) & 1) << IPMI_KCS_CD_BIT)) - -#define IPMI_KCS_IDLE_STATE 0 -#define IPMI_KCS_READ_STATE 1 -#define IPMI_KCS_WRITE_STATE 2 -#define IPMI_KCS_ERROR_STATE 3 - -#define IPMI_KCS_GET_STATE (d) (((d) >> 6) & 0x3) -#define IPMI_KCS_SET_STATE (d, v) ((d) = ((d) & ~0xc0) | (((v) & 0x3) << 6)) - -#define IPMI_KCS_ABORT_STATUS_CMD 0x60 -#define IPMI_KCS_WRITE_START_CMD 0x61 -#define IPMI_KCS_WRITE_END_CMD 0x62 -#define IPMI_KCS_READ_CMD 0x68 - -#define IPMI_KCS_STATUS_NO_ERR 0x00 -#define IPMI_KCS_STATUS_ABORTED_ERR 0x01 -#define IPMI_KCS_STATUS_BAD_CC_ERR 0x02 -#define IPMI_KCS_STATUS_LENGTH_ERR 0x06 - -typedef struct IPMIKCS { -IPMIBmc *bmc; - -bool do_wake; - -qemu_irq irq; - -uint32_t io_base; -unsigned long io_length; -MemoryRegion io; - -bool obf_irq_set; -bool atn_irq_set; -bool use_irq; -bool irqs_enabled; - -uint8_t outmsg[MAX_IPMI_MSG_SIZE ]; -uint32_t outpos; -uint32_t outlen; - -uint8_t inmsg[MAX_IPMI_MSG_SIZE ]; -uint32_t inlen; -bool write_end; - -uint8_t status_reg; -uint8_t data_out_reg; - -int16_t data_in_reg;/* -1 means not written */ -int16_t cmd_reg; - -/* -* This is a response number that we send with the command to make -* sure that the response matches the command. -*/ -uint8_t waiting_rsp; -}IPMIKCS ; - -#define SET_OBF () \ - do { \ - IPMI_KCS_SET_OBF(ik->status_reg, 1); \ - if (ik->use_irq && ik->irqs_enabled && !ik->obf_irq_set) { \ - ik->obf_irq_set = 1; \ - if (!ik->atn_irq_set) { \ - qemu_irq_raise(ik->irq); \ - } \ - } \ - } while (0) - -static void ipmi_kcs_signal (IPMIKCS *ik,IPMIInterface *ii) -{ -IPMIInterfaceClass *iic =IPMI_INTERFACE_GET_CLASS (ii); - - ik->do_wake =1 ; -while (ik->do_wake) { - ik->do_wake =0 ; - iic->handle_if_event (ii); - } -} - -static void ipmi_kcs_handle_event (IPMIInterface *ii) -{ -IPMIInterfaceClass *iic =IPMI_INTERFACE_GET_CLASS (ii); -IPMIKCS *ik = iic->get_backend_data (ii); - -if (ik->cmd_reg ==IPMI_KCS_ABORT_STATUS_CMD ) { -if (IPMI_KCS_GET_STATE (ik->status_reg) !=IPMI_KCS_ERROR_STATE ) { - ik->waiting_rsp++;/* Invalidate the message */ - ik->outmsg[0 ] =IPMI_KCS_STATUS_ABORTED_ERR ; - ik->outlen =1 ; - ik->outpos =0 ; -IPMI_KCS_SET_STATE (ik->status_reg,IPMI_KCS_ERROR_STATE ); -SET_OBF (); - } - goto out; - } - -switch (IPMI_KCS_GET_STATE (ik->status_reg)) { -case IPMI_KCS_IDLE_STATE : -if (ik->cmd_reg ==IPMI_KCS_WRITE_START_CMD ) { -IPMI_KCS_SET_STATE (ik->status_reg,IPMI_KCS_WRITE_STATE ); - ik->cmd_reg =-1 ; - ik->write_end =0 ; - ik->inlen =0 ; -SET_OBF (); - } -break ; - -case IPMI_KCS_READ_STATE : - handle_read: -if (ik->outpos >= ik->outlen) { -IPMI_KCS_SET_STATE (ik->status_reg,IPMI_KCS_IDLE_STATE ); -SET_OBF (); - }else if (ik->data_in_reg ==IPMI_KCS_READ_CMD ) { - ik->data_out_reg = ik->outmsg[ik->outpos]; - ik->outpos++; -SET_OBF (); - }else { - ik->outmsg[0 ] =IPMI_KCS_STATUS_BAD_CC_ERR ; - ik->outlen =1 ; - ik->outpos =0 ; -IPMI_KCS_SET_STATE (ik->status_reg,IPMI_KCS_ERROR_STATE ); -SET_OBF (); - goto out; - } -break ; - -case IPMI_KCS_WRITE_STATE : -if (ik->data_in_reg !=-1 ) { -/* -* Don't worry about input overrun here, that will be -* handled in the BMC. -*/ -if (ik->inlen <sizeof (ik->inmsg)) { - ik->inmsg[ik->inlen] = ik->data_in_reg; - } - ik->inlen++; - } -if (ik->write_end) { -IPMIBmcClass *bk =IPMI_BMC_GET_CLASS (ik->bmc); - ik->outlen =0 ; - ik->write_end =0 ; - ik->outpos =0 ; - bk->handle_command (ik->bmc, ik->inmsg, ik->inlen,sizeof (ik->inmsg), - ik->waiting_rsp); - goto out_noibf; - }else if (ik->cmd_reg ==IPMI_KCS_WRITE_END_CMD ) { - ik->cmd_reg =-1 ; - ik->write_end =1 ; - } -SET_OBF (); -break ; - -case IPMI_KCS_ERROR_STATE : -if (ik->data_in_reg !=-1 ) { -IPMI_KCS_SET_STATE (ik->status_reg,IPMI_KCS_READ_STATE ); - ik->data_in_reg =IPMI_KCS_READ_CMD ; - goto handle_read; - } -break ; - } - -if (ik->cmd_reg !=-1 ) { -/* Got an invalid command */ - ik->outmsg[0 ] =IPMI_KCS_STATUS_BAD_CC_ERR ; - ik->outlen =1 ; - ik->outpos =0 ; -IPMI_KCS_SET_STATE (ik->status_reg,IPMI_KCS_ERROR_STATE ); - } - - out: - ik->cmd_reg =-1 ; - ik->data_in_reg =-1 ; -IPMI_KCS_SET_IBF (ik->status_reg,0 ); - out_noibf: -return ; -} - -static void ipmi_kcs_handle_rsp (IPMIInterface *ii,uint8_t msg_id, -unsigned char *rsp,unsigned int rsp_len) -{ -IPMIInterfaceClass *iic =IPMI_INTERFACE_GET_CLASS (ii); -IPMIKCS *ik = iic->get_backend_data (ii); - -if (ik->waiting_rsp == msg_id) { - ik->waiting_rsp++; -if (rsp_len >sizeof (ik->outmsg)) { - ik->outmsg[0 ] = rsp[0 ]; - ik->outmsg[1 ] = rsp[1 ]; - ik->outmsg[2 ] =IPMI_CC_CANNOT_RETURN_REQ_NUM_BYTES ; - ik->outlen =3 ; - }else { -memcpy (ik->outmsg, rsp, rsp_len); - ik->outlen = rsp_len; - } -IPMI_KCS_SET_STATE (ik->status_reg,IPMI_KCS_READ_STATE ); - ik->data_in_reg =IPMI_KCS_READ_CMD ; -ipmi_kcs_signal (ik, ii); - } -} - - -static uint64_t ipmi_kcs_ioport_read (void *opaque,hwaddr addr,unsigned size) -{ -IPMIInterface *ii = opaque; -IPMIInterfaceClass *iic =IPMI_INTERFACE_GET_CLASS (ii); -IPMIKCS *ik = iic->get_backend_data (ii); -uint32_t ret; - -switch (addr &1 ) { -case 0 : - ret = ik->data_out_reg; -IPMI_KCS_SET_OBF (ik->status_reg,0 ); -if (ik->obf_irq_set) { - ik->obf_irq_set =0 ; -if (!ik->atn_irq_set) { -qemu_irq_lower (ik->irq); - } - } -break ; -case 1 : - ret = ik->status_reg; -if (ik->atn_irq_set) { - ik->atn_irq_set =0 ; -if (!ik->obf_irq_set) { -qemu_irq_lower (ik->irq); - } - } -break ; - } -return ret; -} - -static void ipmi_kcs_ioport_write (void *opaque,hwaddr addr,uint64_t val, -unsigned size) -{ -IPMIInterface *ii = opaque; -IPMIInterfaceClass *iic =IPMI_INTERFACE_GET_CLASS (ii); -IPMIKCS *ik = iic->get_backend_data (ii); - -if (IPMI_KCS_GET_IBF (ik->status_reg)) { -return ; - } - -switch (addr &1 ) { -case 0 : - ik->data_in_reg = val; -break ; - -case 1 : - ik->cmd_reg = val; -break ; - } -IPMI_KCS_SET_IBF (ik->status_reg,1 ); -ipmi_kcs_signal (ik, ii); -} - -const MemoryRegionOps ipmi_kcs_io_ops = { - .read = ipmi_kcs_ioport_read, - .write = ipmi_kcs_ioport_write, - .impl = { - .min_access_size =1 , - .max_access_size =1 , - }, - .endianness =DEVICE_LITTLE_ENDIAN , -}; - -static void ipmi_kcs_set_atn (IPMIInterface *ii,int val,int irq) -{ -IPMIInterfaceClass *iic =IPMI_INTERFACE_GET_CLASS (ii); -IPMIKCS *ik = iic->get_backend_data (ii); - -IPMI_KCS_SET_SMS_ATN (ik->status_reg, val); -if (val) { -if (irq && !ik->atn_irq_set && ik->use_irq && ik->irqs_enabled) { - ik->atn_irq_set =1 ; -if (!ik->obf_irq_set) { -qemu_irq_raise (ik->irq); - } - } - }else { -if (ik->atn_irq_set) { - ik->atn_irq_set =0 ; -if (!ik->obf_irq_set) { -qemu_irq_lower (ik->irq); - } - } - } -} - -static void ipmi_kcs_set_irq_enable (IPMIInterface *ii,int val) -{ -IPMIInterfaceClass *iic =IPMI_INTERFACE_GET_CLASS (ii); -IPMIKCS *ik = iic->get_backend_data (ii); - - ik->irqs_enabled = val; -} - -static void ipmi_kcs_init (IPMIInterface *ii,Error **errp) -{ -IPMIInterfaceClass *iic =IPMI_INTERFACE_GET_CLASS (ii); -IPMIKCS *ik = iic->get_backend_data (ii); - - ik->io_length =2 ; -memory_region_init_io (&ik->io,NULL , &ipmi_kcs_io_ops, ii,"ipmi-kcs" ,2 ); -} -#define TYPE_ISA_IPMI_KCS "isa-ipmi-kcs"#define ISA_IPMI_KCS (obj) OBJECT_CHECK(ISAIPMIKCSDevice, (obj), \ TYPE_ISA_IPMI_KCS)@@ -365,36 +39,32 @@ static void ipmi_kcs_init(IPMIInterface *ii, Error **errp)typedef struct ISAIPMIKCSDevice {ISADevice dev;int32_t isairq; +qemu_irq irq;IPMIKCS kcs;uint32_t uuid; }ISAIPMIKCSDevice ; -static void ipmi_kcs_get_fwinfo (IPMIInterface *ii,IPMIFwInfo *info) +static void isa_ipmi_kcs_get_fwinfo (IPMIInterface *ii,IPMIFwInfo *info) {ISAIPMIKCSDevice *iik =ISA_IPMI_KCS (ii); - info->interface_name ="kcs" ; - info->interface_type =IPMI_SMBIOS_KCS ; - info->ipmi_spec_major_revision =2 ; - info->ipmi_spec_minor_revision =0 ; - info->base_address = iik->kcs.io_base; - info->i2c_slave_address = iik->kcs.bmc->slave_addr; - info->register_length = iik->kcs.io_length; - info->register_spacing =1 ; - info->memspace =IPMI_MEMSPACE_IO ; - info->irq_type =IPMI_LEVEL_IRQ ; +ipmi_kcs_get_fwinfo (&iik->kcs, info); info->interrupt_number = iik->isairq; info->uuid = iik->uuid; } -static void ipmi_kcs_class_init (IPMIInterfaceClass *iic) +static void isa_ipmi_kcs_raise_irq (IPMIKCS *ik) { - iic->init = ipmi_kcs_init; - iic->set_atn = ipmi_kcs_set_atn; - iic->handle_rsp = ipmi_kcs_handle_rsp; - iic->handle_if_event = ipmi_kcs_handle_event; - iic->set_irq_enable = ipmi_kcs_set_irq_enable; - iic->get_fwinfo = ipmi_kcs_get_fwinfo; +ISAIPMIKCSDevice *iik = ik->opaque; + +qemu_irq_raise (iik->irq); +} + +static void isa_ipmi_kcs_lower_irq (IPMIKCS *ik) +{ +ISAIPMIKCSDevice *iik = ik->opaque; + +qemu_irq_lower (iik->irq); }static void ipmi_isa_realize (DeviceState *dev,Error **errp)@@ -412,14 +82,17 @@ static void ipmi_isa_realize(DeviceState *dev, Error **errp) iik->uuid =ipmi_next_uuid (); iik->kcs.bmc->intf = ii; + iik->kcs.opaque = iik; iic->init (ii, errp);if (*errp)return ;if (iik->isairq >0 ) { -isa_init_irq (isadev, &iik->kcs.irq, iik->isairq); +isa_init_irq (isadev, &iik->irq, iik->isairq); iik->kcs.use_irq =1 ; + iik->kcs.raise_irq = isa_ipmi_kcs_raise_irq; + iik->kcs.lower_irq = isa_ipmi_kcs_lower_irq; }qdev_set_legacy_instance_id (dev, iik->kcs.io_base, iik->kcs.io_length);@@ -427,60 +100,11 @@ static void ipmi_isa_realize(DeviceState *dev, Error **errp)isa_register_ioport (isadev, &iik->kcs.io, iik->kcs.io_base); } -static int ipmi_kcs_vmstate_post_load (void *opaque,int version) -{ -IPMIKCS *ik = opaque; - -/* Make sure all the values are sane. */ -if (ik->outpos >=MAX_IPMI_MSG_SIZE || ik->outlen >=MAX_IPMI_MSG_SIZE || - ik->outpos >= ik->outlen) { -qemu_log_mask (LOG_GUEST_ERROR , -"ipmi:kcs: vmstate transfer received bad out values: %d %d\n" , - ik->outpos, ik->outlen); - ik->outpos =0 ; - ik->outlen =0 ; - } - -if (ik->inlen >=MAX_IPMI_MSG_SIZE ) { -qemu_log_mask (LOG_GUEST_ERROR , -"ipmi:kcs: vmstate transfer received bad in value: %d\n" , - ik->inlen); - ik->inlen =0 ; - } - -return 0 ; -} -static bool vmstate_kcs_before_version2 (void *opaque,int version) {return version <=1 ; } -static const VMStateDescription vmstate_IPMIKCS = { - .name =TYPE_IPMI_INTERFACE_PREFIX "kcs" , - .version_id =2 , - .minimum_version_id =1 , - .post_load = ipmi_kcs_vmstate_post_load, - .fields = (VMStateField []) { -VMSTATE_BOOL (obf_irq_set,IPMIKCS ), -VMSTATE_BOOL (atn_irq_set,IPMIKCS ), -VMSTATE_UNUSED_TEST (vmstate_kcs_before_version2,1 ),/* Was use_irq */ -VMSTATE_BOOL (irqs_enabled,IPMIKCS ), -VMSTATE_UINT32 (outpos,IPMIKCS ), -VMSTATE_UINT32_V (outlen,IPMIKCS ,2 ), -VMSTATE_UINT8_ARRAY (outmsg,IPMIKCS ,MAX_IPMI_MSG_SIZE ), -VMSTATE_UINT32_V (inlen,IPMIKCS ,2 ), -VMSTATE_UINT8_ARRAY (inmsg,IPMIKCS ,MAX_IPMI_MSG_SIZE ), -VMSTATE_BOOL (write_end,IPMIKCS ), -VMSTATE_UINT8 (status_reg,IPMIKCS ), -VMSTATE_UINT8 (data_out_reg,IPMIKCS ), -VMSTATE_INT16 (data_in_reg,IPMIKCS ), -VMSTATE_INT16 (cmd_reg,IPMIKCS ), -VMSTATE_UINT8 (waiting_rsp,IPMIKCS ), -VMSTATE_END_OF_LIST () - } -}; -static const VMStateDescription vmstate_ISAIPMIKCSDevice = { .name =TYPE_IPMI_INTERFACE , .version_id =2 ,@@ -531,6 +155,7 @@ static void isa_ipmi_kcs_class_init(ObjectClass *oc, void *data) iic->get_backend_data = isa_ipmi_kcs_get_backend_data;ipmi_kcs_class_init (iic); + iic->get_fwinfo = isa_ipmi_kcs_get_fwinfo; }static const TypeInfo isa_ipmi_kcs_info = {include/hw/ipmi/ipmi_kcs.h new file +75
-0@@ -0,0 +1,75 @@ +/* +* QEMU IPMI KCS emulation +* +* Copyright (c) 2015,2017 Corey Minyard, MontaVista Software, LLC +* +* Permission is hereby granted, free of charge, to any person obtaining a copy +* of this software and associated documentation files (the "Software"), to deal +* in the Software without restriction, including without limitation the rights +* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +* copies of the Software, and to permit persons to whom the Software is +* furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in +* all copies or substantial portions of the Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN +* THE SOFTWARE. +*/ + +#ifndef HW_IPMI_KCS_H +#define HW_IPMI_KCS_H + +#include "hw/ipmi/ipmi.h" + +typedef struct IPMIKCS { +IPMIBmc *bmc; + +bool do_wake; + +bool obf_irq_set; +bool atn_irq_set; +bool irqs_enabled; + +uint8_t outmsg[MAX_IPMI_MSG_SIZE ]; +uint32_t outpos; +uint32_t outlen; + +uint8_t inmsg[MAX_IPMI_MSG_SIZE ]; +uint32_t inlen; +bool write_end; + +uint8_t status_reg; +uint8_t data_out_reg; + +int16_t data_in_reg;/* -1 means not written */ +int16_t cmd_reg; + +/* +* This is a response number that we send with the command to make +* sure that the response matches the command. +*/ +uint8_t waiting_rsp; + +uint32_t io_base; +unsigned long io_length; +MemoryRegion io; + +void (*raise_irq)(struct IPMIKCS *ik); +void (*lower_irq)(struct IPMIKCS *ik); +void *opaque; + +bool use_irq; +}IPMIKCS ; + +void ipmi_kcs_get_fwinfo (IPMIKCS *ik,IPMIFwInfo *info); +void ipmi_kcs_class_init (IPMIInterfaceClass *iic); +extern const VMStateDescription vmstate_IPMIKCS; +int ipmi_kcs_vmstate_post_load (void *opaque,int version); + +#endif /* HW_IPMI_KCS_H */
PATCH 8/15 ipmi: Split out BT-specific code from ISA BT code
In reply to [email protected]From: Corey Minyard <[email protected]>
Get ready for PCI and other BT interfaces.
No functional changes, just split the code into generic BT code and ISA-specific BT code.
--- hw/ipmi/Makefile.objs | 2 +- hw/ipmi/ipmi_bt.c | 426 ++++++++++++++++++++++++++++++++++++ hw/ipmi/isa_ipmi_bt.c | 441 ++------------------------------------ include/hw/ipmi/ipmi_bt.h | 72 +++++++ 4 files changed, 520 insertions(+), 421 deletions(-) create mode 100644 hw/ipmi/ipmi_bt.c create mode 100644 include/hw/ipmi/ipmi_bt.h
hw/ipmi/Makefile.objs +1 -1
@@ -1,4 +1,4 @@ -common-obj-$(CONFIG_IPMI) += ipmi.o ipmi_kcs.o +common-obj-$(CONFIG_IPMI) += ipmi.o ipmi_kcs.o ipmi_bt.o common-obj-$(CONFIG_IPMI_LOCAL) += ipmi_bmc_sim.o common-obj-$(CONFIG_IPMI_EXTERN) += ipmi_bmc_extern.o common-obj-$(CONFIG_ISA_IPMI_KCS) += isa_ipmi_kcs.o
hw/ipmi/ipmi_bt.c new file +426 -0
426 lines not on this page · raw message
hw/ipmi/isa_ipmi_bt.c +21 -420
496 lines not on this page · raw message
include/hw/ipmi/ipmi_bt.h new file +72 -0
72 lines not on this page · raw message
Signature · 1 line
2.17.1
Re: [Qemu-devel] [PATCH 08/15] ipmi: Split out BT-specific code from ISA BT code
Quoted 8 lines · On 8/19/19 10:16 PM, [email protected] wrote:
From: Corey Minyard <[email protected]>
Get ready for PCI and other BT interfaces.
No functional changes, just split the code into generic BT code and ISA-specific BT code.
Signed-off-by Corey Minyard <[email protected]>
Quoted 1,034 lines
--- hw/ipmi/Makefile.objs | 2 +- hw/ipmi/ipmi_bt.c | 426 ++++++++++++++++++++++++++++++++++++ hw/ipmi/isa_ipmi_bt.c | 441 ++------------------------------------ include/hw/ipmi/ipmi_bt.h | 72 +++++++ 4 files changed, 520 insertions(+), 421 deletions(-) create mode 100644 hw/ipmi/ipmi_bt.c create mode 100644 include/hw/ipmi/ipmi_bt.hhw/ipmi/Makefile.objs +1
-1@@ -1,4 +1,4 @@ -common-obj-$(CONFIG_IPMI) += ipmi.o ipmi_kcs.o +common-obj-$(CONFIG_IPMI) += ipmi.o ipmi_kcs.o ipmi_bt.o common-obj-$(CONFIG_IPMI_LOCAL) += ipmi_bmc_sim.o common-obj-$(CONFIG_IPMI_EXTERN) += ipmi_bmc_extern.o common-obj-$(CONFIG_ISA_IPMI_KCS) += isa_ipmi_kcs.ohw/ipmi/ipmi_bt.c new file +426
-0@@ -0,0 +1,426 @@ +/* +* QEMU IPMI BT emulation +* +* Copyright (c) 2015 Corey Minyard, MontaVista Software, LLC +* +* Permission is hereby granted, free of charge, to any person obtaining a copy +* of this software and associated documentation files (the "Software"), to deal +* in the Software without restriction, including without limitation the rights +* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +* copies of the Software, and to permit persons to whom the Software is +* furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in +* all copies or substantial portions of the Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN +* THE SOFTWARE. +*/ +#include "qemu/osdep.h" +#include "migration/vmstate.h" +#include "qemu/log.h" +#include "qapi/error.h" +#include "hw/ipmi/ipmi_bt.h" + +/* Control register */ +#define IPMI_BT_CLR_WR_BIT 0 +#define IPMI_BT_CLR_RD_BIT 1 +#define IPMI_BT_H2B_ATN_BIT 2 +#define IPMI_BT_B2H_ATN_BIT 3 +#define IPMI_BT_SMS_ATN_BIT 4 +#define IPMI_BT_HBUSY_BIT 6 +#define IPMI_BT_BBUSY_BIT 7 + +#define IPMI_BT_GET_CLR_WR (d) (((d) >> IPMI_BT_CLR_WR_BIT) & 0x1) + +#define IPMI_BT_GET_CLR_RD (d) (((d) >> IPMI_BT_CLR_RD_BIT) & 0x1) + +#define IPMI_BT_GET_H2B_ATN (d) (((d) >> IPMI_BT_H2B_ATN_BIT) & 0x1) + +#define IPMI_BT_B2H_ATN_MASK (1 << IPMI_BT_B2H_ATN_BIT) +#define IPMI_BT_GET_B2H_ATN (d) (((d) >> IPMI_BT_B2H_ATN_BIT) & 0x1) +#define IPMI_BT_SET_B2H_ATN (d, v) ((d) = (((d) & ~IPMI_BT_B2H_ATN_MASK) | \ + (!!(v) << IPMI_BT_B2H_ATN_BIT))) + +#define IPMI_BT_SMS_ATN_MASK (1 << IPMI_BT_SMS_ATN_BIT) +#define IPMI_BT_GET_SMS_ATN (d) (((d) >> IPMI_BT_SMS_ATN_BIT) & 0x1) +#define IPMI_BT_SET_SMS_ATN (d, v) ((d) = (((d) & ~IPMI_BT_SMS_ATN_MASK) | \ + (!!(v) << IPMI_BT_SMS_ATN_BIT))) + +#define IPMI_BT_HBUSY_MASK (1 << IPMI_BT_HBUSY_BIT) +#define IPMI_BT_GET_HBUSY (d) (((d) >> IPMI_BT_HBUSY_BIT) & 0x1) +#define IPMI_BT_SET_HBUSY (d, v) ((d) = (((d) & ~IPMI_BT_HBUSY_MASK) | \ + (!!(v) << IPMI_BT_HBUSY_BIT))) + +#define IPMI_BT_BBUSY_MASK (1 << IPMI_BT_BBUSY_BIT) +#define IPMI_BT_SET_BBUSY (d, v) ((d) = (((d) & ~IPMI_BT_BBUSY_MASK) | \ + (!!(v) << IPMI_BT_BBUSY_BIT))) + + +/* Mask register */ +#define IPMI_BT_B2H_IRQ_EN_BIT 0 +#define IPMI_BT_B2H_IRQ_BIT 1 + +#define IPMI_BT_B2H_IRQ_EN_MASK (1 << IPMI_BT_B2H_IRQ_EN_BIT) +#define IPMI_BT_GET_B2H_IRQ_EN (d) (((d) >> IPMI_BT_B2H_IRQ_EN_BIT) & 0x1) +#define IPMI_BT_SET_B2H_IRQ_EN (d, v) ((d) = (((d) & ~IPMI_BT_B2H_IRQ_EN_MASK) |\ + (!!(v) << IPMI_BT_B2H_IRQ_EN_BIT))) + +#define IPMI_BT_B2H_IRQ_MASK (1 << IPMI_BT_B2H_IRQ_BIT) +#define IPMI_BT_GET_B2H_IRQ (d) (((d) >> IPMI_BT_B2H_IRQ_BIT) & 0x1) +#define IPMI_BT_SET_B2H_IRQ (d, v) ((d) = (((d) & ~IPMI_BT_B2H_IRQ_MASK) | \ + (!!(v) << IPMI_BT_B2H_IRQ_BIT))) + +#define IPMI_CMD_GET_BT_INTF_CAP 0x36 + +static void ipmi_bt_raise_irq (IPMIBT *ib) +{ +if (ib->use_irq && ib->irqs_enabled && ib->raise_irq) { + ib->raise_irq (ib); + } +} + +static void ipmi_bt_lower_irq (IPMIBT *ib) +{ +if (ib->lower_irq) { + ib->lower_irq (ib); + } +} + +static void ipmi_bt_handle_event (IPMIInterface *ii) +{ +IPMIInterfaceClass *iic =IPMI_INTERFACE_GET_CLASS (ii); +IPMIBT *ib = iic->get_backend_data (ii); + +if (ib->inlen <4 ) { + goto out; + } +/* Note that overruns are handled by handle_command */ +if (ib->inmsg[0 ] != (ib->inlen -1 )) { +/* Length mismatch, just ignore. */ +IPMI_BT_SET_BBUSY (ib->control_reg,1 ); + ib->inlen =0 ; + goto out; + } +if ((ib->inmsg[1 ] == (IPMI_NETFN_APP <<2 )) && + (ib->inmsg[3 ] ==IPMI_CMD_GET_BT_INTF_CAP )) { +/* We handle this one ourselves. */ + ib->outmsg[0 ] =9 ; + ib->outmsg[1 ] = ib->inmsg[1 ] |0x04 ; + ib->outmsg[2 ] = ib->inmsg[2 ]; + ib->outmsg[3 ] = ib->inmsg[3 ]; + ib->outmsg[4 ] =0 ; + ib->outmsg[5 ] =1 ;/* Only support 1 outstanding request. */ +if (sizeof (ib->inmsg) >0xff ) {/* Input buffer size */ + ib->outmsg[6 ] =0xff ; + }else { + ib->outmsg[6 ] = (unsigned char )sizeof (ib->inmsg); + } +if (sizeof (ib->outmsg) >0xff ) {/* Output buffer size */ + ib->outmsg[7 ] =0xff ; + }else { + ib->outmsg[7 ] = (unsigned char )sizeof (ib->outmsg); + } + ib->outmsg[8 ] =10 ;/* Max request to response time */ + ib->outmsg[9 ] =0 ;/* Don't recommend retries */ + ib->outlen =10 ; +IPMI_BT_SET_BBUSY (ib->control_reg,0 ); +IPMI_BT_SET_B2H_ATN (ib->control_reg,1 ); +if (!IPMI_BT_GET_B2H_IRQ (ib->mask_reg) && +IPMI_BT_GET_B2H_IRQ_EN (ib->mask_reg)) { +IPMI_BT_SET_B2H_IRQ (ib->mask_reg,1 ); +ipmi_bt_raise_irq (ib); + } + goto out; + } + ib->waiting_seq = ib->inmsg[2 ]; + ib->inmsg[2 ] = ib->inmsg[1 ]; + { +IPMIBmcClass *bk =IPMI_BMC_GET_CLASS (ib->bmc); + bk->handle_command (ib->bmc, ib->inmsg +2 , ib->inlen -2 , +sizeof (ib->inmsg), ib->waiting_rsp); + } + out: +return ; +} + +static void ipmi_bt_handle_rsp (IPMIInterface *ii,uint8_t msg_id, +unsigned char *rsp,unsigned int rsp_len) +{ +IPMIInterfaceClass *iic =IPMI_INTERFACE_GET_CLASS (ii); +IPMIBT *ib = iic->get_backend_data (ii); + +if (ib->waiting_rsp == msg_id) { + ib->waiting_rsp++; +if (rsp_len > (sizeof (ib->outmsg) -2 )) { + ib->outmsg[0 ] =4 ; + ib->outmsg[1 ] = rsp[0 ]; + ib->outmsg[2 ] = ib->waiting_seq; + ib->outmsg[3 ] = rsp[1 ]; + ib->outmsg[4 ] =IPMI_CC_CANNOT_RETURN_REQ_NUM_BYTES ; + ib->outlen =5 ; + }else { + ib->outmsg[0 ] = rsp_len +1 ; + ib->outmsg[1 ] = rsp[0 ]; + ib->outmsg[2 ] = ib->waiting_seq; +memcpy (ib->outmsg +3 , rsp +1 , rsp_len -1 ); + ib->outlen = rsp_len +2 ; + } +IPMI_BT_SET_BBUSY (ib->control_reg,0 ); +IPMI_BT_SET_B2H_ATN (ib->control_reg,1 ); +if (!IPMI_BT_GET_B2H_IRQ (ib->mask_reg) && +IPMI_BT_GET_B2H_IRQ_EN (ib->mask_reg)) { +IPMI_BT_SET_B2H_IRQ (ib->mask_reg,1 ); +ipmi_bt_raise_irq (ib); + } + } +} + + +static uint64_t ipmi_bt_ioport_read (void *opaque,hwaddr addr,unsigned size) +{ +IPMIInterface *ii = opaque; +IPMIInterfaceClass *iic =IPMI_INTERFACE_GET_CLASS (ii); +IPMIBT *ib = iic->get_backend_data (ii); +uint32_t ret =0xff ; + +switch (addr &3 ) { +case 0 : + ret = ib->control_reg; +break ; +case 1 : +if (ib->outpos < ib->outlen) { + ret = ib->outmsg[ib->outpos]; + ib->outpos++; +if (ib->outpos == ib->outlen) { + ib->outpos =0 ; + ib->outlen =0 ; + } + }else { + ret =0xff ; + } +break ; +case 2 : + ret = ib->mask_reg; +break ; + } +return ret; +} + +static void ipmi_bt_signal (IPMIBT *ib,IPMIInterface *ii) +{ +IPMIInterfaceClass *iic =IPMI_INTERFACE_GET_CLASS (ii); + + ib->do_wake =1 ; +while (ib->do_wake) { + ib->do_wake =0 ; + iic->handle_if_event (ii); + } +} + +static void ipmi_bt_ioport_write (void *opaque,hwaddr addr,uint64_t val, +unsigned size) +{ +IPMIInterface *ii = opaque; +IPMIInterfaceClass *iic =IPMI_INTERFACE_GET_CLASS (ii); +IPMIBT *ib = iic->get_backend_data (ii); + +switch (addr &3 ) { +case 0 : +if (IPMI_BT_GET_CLR_WR (val)) { + ib->inlen =0 ; + } +if (IPMI_BT_GET_CLR_RD (val)) { + ib->outpos =0 ; + } +if (IPMI_BT_GET_B2H_ATN (val)) { +IPMI_BT_SET_B2H_ATN (ib->control_reg,0 ); + } +if (IPMI_BT_GET_SMS_ATN (val)) { +IPMI_BT_SET_SMS_ATN (ib->control_reg,0 ); + } +if (IPMI_BT_GET_HBUSY (val)) { +/* Toggle */ +IPMI_BT_SET_HBUSY (ib->control_reg, + !IPMI_BT_GET_HBUSY (ib->control_reg)); + } +if (IPMI_BT_GET_H2B_ATN (val)) { +IPMI_BT_SET_BBUSY (ib->control_reg,1 ); +ipmi_bt_signal (ib, ii); + } +break ; + +case 1 : +if (ib->inlen <sizeof (ib->inmsg)) { + ib->inmsg[ib->inlen] = val; + } + ib->inlen++; +break ; + +case 2 : +if (IPMI_BT_GET_B2H_IRQ_EN (val) != +IPMI_BT_GET_B2H_IRQ_EN (ib->mask_reg)) { +if (IPMI_BT_GET_B2H_IRQ_EN (val)) { +if (IPMI_BT_GET_B2H_ATN (ib->control_reg) || +IPMI_BT_GET_SMS_ATN (ib->control_reg)) { +IPMI_BT_SET_B2H_IRQ (ib->mask_reg,1 ); +ipmi_bt_raise_irq (ib); + } +IPMI_BT_SET_B2H_IRQ_EN (ib->mask_reg,1 ); + }else { +if (IPMI_BT_GET_B2H_IRQ (ib->mask_reg)) { +IPMI_BT_SET_B2H_IRQ (ib->mask_reg,0 ); +ipmi_bt_lower_irq (ib); + } +IPMI_BT_SET_B2H_IRQ_EN (ib->mask_reg,0 ); + } + } +if (IPMI_BT_GET_B2H_IRQ (val) &&IPMI_BT_GET_B2H_IRQ (ib->mask_reg)) { +IPMI_BT_SET_B2H_IRQ (ib->mask_reg,0 ); +ipmi_bt_lower_irq (ib); + } +break ; + } +} + +static const MemoryRegionOps ipmi_bt_io_ops = { + .read = ipmi_bt_ioport_read, + .write = ipmi_bt_ioport_write, + .impl = { + .min_access_size =1 , + .max_access_size =1 , + }, + .endianness =DEVICE_LITTLE_ENDIAN , +}; + +static void ipmi_bt_set_atn (IPMIInterface *ii,int val,int irq) +{ +IPMIInterfaceClass *iic =IPMI_INTERFACE_GET_CLASS (ii); +IPMIBT *ib = iic->get_backend_data (ii); + +if (!!val ==IPMI_BT_GET_SMS_ATN (ib->control_reg)) { +return ; + } + +IPMI_BT_SET_SMS_ATN (ib->control_reg, val); +if (val) { +if (irq && !IPMI_BT_GET_B2H_ATN (ib->control_reg) && +IPMI_BT_GET_B2H_IRQ_EN (ib->mask_reg)) { +IPMI_BT_SET_B2H_IRQ (ib->mask_reg,1 ); +ipmi_bt_raise_irq (ib); + } + }else { +if (!IPMI_BT_GET_B2H_ATN (ib->control_reg) && +IPMI_BT_GET_B2H_IRQ (ib->mask_reg)) { +IPMI_BT_SET_B2H_IRQ (ib->mask_reg,0 ); +ipmi_bt_lower_irq (ib); + } + } +} + +static void ipmi_bt_handle_reset (IPMIInterface *ii,bool is_cold) +{ +IPMIInterfaceClass *iic =IPMI_INTERFACE_GET_CLASS (ii); +IPMIBT *ib = iic->get_backend_data (ii); + +if (is_cold) { +/* Disable the BT interrupt on reset */ +if (IPMI_BT_GET_B2H_IRQ (ib->mask_reg)) { +IPMI_BT_SET_B2H_IRQ (ib->mask_reg,0 ); +ipmi_bt_lower_irq (ib); + } +IPMI_BT_SET_B2H_IRQ_EN (ib->mask_reg,0 ); + } +} + +static void ipmi_bt_set_irq_enable (IPMIInterface *ii,int val) +{ +IPMIInterfaceClass *iic =IPMI_INTERFACE_GET_CLASS (ii); +IPMIBT *ib = iic->get_backend_data (ii); + + ib->irqs_enabled = val; +} + +static void ipmi_bt_init (IPMIInterface *ii,Error **errp) +{ +IPMIInterfaceClass *iic =IPMI_INTERFACE_GET_CLASS (ii); +IPMIBT *ib = iic->get_backend_data (ii); + + ib->io_length =3 ; + +memory_region_init_io (&ib->io,NULL , &ipmi_bt_io_ops, ii,"ipmi-bt" ,3 ); +} + +int ipmi_bt_vmstate_post_load (void *opaque,int version) +{ +IPMIBT *ib = opaque; + +/* Make sure all the values are sane. */ +if (ib->outpos >=MAX_IPMI_MSG_SIZE || ib->outlen >=MAX_IPMI_MSG_SIZE || + ib->outpos >= ib->outlen) { +qemu_log_mask (LOG_GUEST_ERROR , +"ipmi:bt: vmstate transfer received bad out values: %d %d\n" , + ib->outpos, ib->outlen); + ib->outpos =0 ; + ib->outlen =0 ; + } + +if (ib->inlen >=MAX_IPMI_MSG_SIZE ) { +qemu_log_mask (LOG_GUEST_ERROR , +"ipmi:bt: vmstate transfer received bad in value: %d\n" , + ib->inlen); + ib->inlen =0 ; + } + +return 0 ; +} + +const VMStateDescription vmstate_IPMIBT = { + .name =TYPE_IPMI_INTERFACE_PREFIX "bt" , + .version_id =1 , + .minimum_version_id =1 , + .post_load = ipmi_bt_vmstate_post_load, + .fields = (VMStateField []) { +VMSTATE_BOOL (obf_irq_set,IPMIBT ), +VMSTATE_BOOL (atn_irq_set,IPMIBT ), +VMSTATE_BOOL (irqs_enabled,IPMIBT ), +VMSTATE_UINT32 (outpos,IPMIBT ), +VMSTATE_UINT32 (outlen,IPMIBT ), +VMSTATE_UINT8_ARRAY (outmsg,IPMIBT ,MAX_IPMI_MSG_SIZE ), +VMSTATE_UINT32 (inlen,IPMIBT ), +VMSTATE_UINT8_ARRAY (inmsg,IPMIBT ,MAX_IPMI_MSG_SIZE ), +VMSTATE_UINT8 (control_reg,IPMIBT ), +VMSTATE_UINT8 (mask_reg,IPMIBT ), +VMSTATE_UINT8 (waiting_rsp,IPMIBT ), +VMSTATE_UINT8 (waiting_seq,IPMIBT ), +VMSTATE_END_OF_LIST () + } +}; + +void ipmi_bt_get_fwinfo (struct IPMIBT *ib,IPMIFwInfo *info) +{ + info->interface_name ="bt" ; + info->interface_type =IPMI_SMBIOS_BT ; + info->ipmi_spec_major_revision =2 ; + info->ipmi_spec_minor_revision =0 ; + info->base_address = ib->io_base; + info->register_length = ib->io_length; + info->register_spacing =1 ; + info->memspace =IPMI_MEMSPACE_IO ; + info->irq_type =IPMI_LEVEL_IRQ ; +} + +void ipmi_bt_class_init (IPMIInterfaceClass *iic) +{ + iic->init = ipmi_bt_init; + iic->set_atn = ipmi_bt_set_atn; + iic->handle_rsp = ipmi_bt_handle_rsp; + iic->handle_if_event = ipmi_bt_handle_event; + iic->set_irq_enable = ipmi_bt_set_irq_enable; + iic->reset = ipmi_bt_handle_reset; +}hw/ipmi/isa_ipmi_bt.c +21
-420@@ -26,403 +26,46 @@#include "qemu/log.h" #include "qemu/module.h" #include "qapi/error.h" -#include "hw/ipmi/ipmi.h" #include "hw/irq.h" +#include "hw/ipmi/ipmi_bt.h" #include "hw/isa/isa.h" #include "hw/qdev-properties.h" #include "migration/vmstate.h" -/* Control register */ -#define IPMI_BT_CLR_WR_BIT 0 -#define IPMI_BT_CLR_RD_BIT 1 -#define IPMI_BT_H2B_ATN_BIT 2 -#define IPMI_BT_B2H_ATN_BIT 3 -#define IPMI_BT_SMS_ATN_BIT 4 -#define IPMI_BT_HBUSY_BIT 6 -#define IPMI_BT_BBUSY_BIT 7 - -#define IPMI_BT_GET_CLR_WR (d) (((d) >> IPMI_BT_CLR_WR_BIT) & 0x1) - -#define IPMI_BT_GET_CLR_RD (d) (((d) >> IPMI_BT_CLR_RD_BIT) & 0x1) - -#define IPMI_BT_GET_H2B_ATN (d) (((d) >> IPMI_BT_H2B_ATN_BIT) & 0x1) - -#define IPMI_BT_B2H_ATN_MASK (1 << IPMI_BT_B2H_ATN_BIT) -#define IPMI_BT_GET_B2H_ATN (d) (((d) >> IPMI_BT_B2H_ATN_BIT) & 0x1) -#define IPMI_BT_SET_B2H_ATN (d, v) ((d) = (((d) & ~IPMI_BT_B2H_ATN_MASK) | \ - (!!(v) << IPMI_BT_B2H_ATN_BIT))) - -#define IPMI_BT_SMS_ATN_MASK (1 << IPMI_BT_SMS_ATN_BIT) -#define IPMI_BT_GET_SMS_ATN (d) (((d) >> IPMI_BT_SMS_ATN_BIT) & 0x1) -#define IPMI_BT_SET_SMS_ATN (d, v) ((d) = (((d) & ~IPMI_BT_SMS_ATN_MASK) | \ - (!!(v) << IPMI_BT_SMS_ATN_BIT))) - -#define IPMI_BT_HBUSY_MASK (1 << IPMI_BT_HBUSY_BIT) -#define IPMI_BT_GET_HBUSY (d) (((d) >> IPMI_BT_HBUSY_BIT) & 0x1) -#define IPMI_BT_SET_HBUSY (d, v) ((d) = (((d) & ~IPMI_BT_HBUSY_MASK) | \ - (!!(v) << IPMI_BT_HBUSY_BIT))) - -#define IPMI_BT_BBUSY_MASK (1 << IPMI_BT_BBUSY_BIT) -#define IPMI_BT_SET_BBUSY (d, v) ((d) = (((d) & ~IPMI_BT_BBUSY_MASK) | \ - (!!(v) << IPMI_BT_BBUSY_BIT))) - - -/* Mask register */ -#define IPMI_BT_B2H_IRQ_EN_BIT 0 -#define IPMI_BT_B2H_IRQ_BIT 1 - -#define IPMI_BT_B2H_IRQ_EN_MASK (1 << IPMI_BT_B2H_IRQ_EN_BIT) -#define IPMI_BT_GET_B2H_IRQ_EN (d) (((d) >> IPMI_BT_B2H_IRQ_EN_BIT) & 0x1) -#define IPMI_BT_SET_B2H_IRQ_EN (d, v) ((d) = (((d) & ~IPMI_BT_B2H_IRQ_EN_MASK) |\ - (!!(v) << IPMI_BT_B2H_IRQ_EN_BIT))) - -#define IPMI_BT_B2H_IRQ_MASK (1 << IPMI_BT_B2H_IRQ_BIT) -#define IPMI_BT_GET_B2H_IRQ (d) (((d) >> IPMI_BT_B2H_IRQ_BIT) & 0x1) -#define IPMI_BT_SET_B2H_IRQ (d, v) ((d) = (((d) & ~IPMI_BT_B2H_IRQ_MASK) | \ - (!!(v) << IPMI_BT_B2H_IRQ_BIT))) - -typedef struct IPMIBT { -IPMIBmc *bmc; - -bool do_wake; - -qemu_irq irq; - -uint32_t io_base; -unsigned long io_length; -MemoryRegion io; - -bool obf_irq_set; -bool atn_irq_set; -bool use_irq; -bool irqs_enabled; - -uint8_t outmsg[MAX_IPMI_MSG_SIZE ]; -uint32_t outpos; -uint32_t outlen; - -uint8_t inmsg[MAX_IPMI_MSG_SIZE ]; -uint32_t inlen; - -uint8_t control_reg; -uint8_t mask_reg; - -/* -* This is a response number that we send with the command to make -* sure that the response matches the command. -*/ -uint8_t waiting_rsp; -uint8_t waiting_seq; -}IPMIBT ; - -#define IPMI_CMD_GET_BT_INTF_CAP 0x36 - -static void ipmi_bt_handle_event (IPMIInterface *ii) -{ -IPMIInterfaceClass *iic =IPMI_INTERFACE_GET_CLASS (ii); -IPMIBT *ib = iic->get_backend_data (ii); - -if (ib->inlen <4 ) { - goto out; - } -/* Note that overruns are handled by handle_command */ -if (ib->inmsg[0 ] != (ib->inlen -1 )) { -/* Length mismatch, just ignore. */ -IPMI_BT_SET_BBUSY (ib->control_reg,1 ); - ib->inlen =0 ; - goto out; - } -if ((ib->inmsg[1 ] == (IPMI_NETFN_APP <<2 )) && - (ib->inmsg[3 ] ==IPMI_CMD_GET_BT_INTF_CAP )) { -/* We handle this one ourselves. */ - ib->outmsg[0 ] =9 ; - ib->outmsg[1 ] = ib->inmsg[1 ] |0x04 ; - ib->outmsg[2 ] = ib->inmsg[2 ]; - ib->outmsg[3 ] = ib->inmsg[3 ]; - ib->outmsg[4 ] =0 ; - ib->outmsg[5 ] =1 ;/* Only support 1 outstanding request. */ -if (sizeof (ib->inmsg) >0xff ) {/* Input buffer size */ - ib->outmsg[6 ] =0xff ; - }else { - ib->outmsg[6 ] = (unsigned char )sizeof (ib->inmsg); - } -if (sizeof (ib->outmsg) >0xff ) {/* Output buffer size */ - ib->outmsg[7 ] =0xff ; - }else { - ib->outmsg[7 ] = (unsigned char )sizeof (ib->outmsg); - } - ib->outmsg[8 ] =10 ;/* Max request to response time */ - ib->outmsg[9 ] =0 ;/* Don't recommend retries */ - ib->outlen =10 ; -IPMI_BT_SET_BBUSY (ib->control_reg,0 ); -IPMI_BT_SET_B2H_ATN (ib->control_reg,1 ); -if (ib->use_irq && ib->irqs_enabled && - !IPMI_BT_GET_B2H_IRQ (ib->mask_reg) && -IPMI_BT_GET_B2H_IRQ_EN (ib->mask_reg)) { -IPMI_BT_SET_B2H_IRQ (ib->mask_reg,1 ); -qemu_irq_raise (ib->irq); - } - goto out; - } - ib->waiting_seq = ib->inmsg[2 ]; - ib->inmsg[2 ] = ib->inmsg[1 ]; - { -IPMIBmcClass *bk =IPMI_BMC_GET_CLASS (ib->bmc); - bk->handle_command (ib->bmc, ib->inmsg +2 , ib->inlen -2 , -sizeof (ib->inmsg), ib->waiting_rsp); - } - out: -return ; -} - -static void ipmi_bt_handle_rsp (IPMIInterface *ii,uint8_t msg_id, -unsigned char *rsp,unsigned int rsp_len) -{ -IPMIInterfaceClass *iic =IPMI_INTERFACE_GET_CLASS (ii); -IPMIBT *ib = iic->get_backend_data (ii); - -if (ib->waiting_rsp == msg_id) { - ib->waiting_rsp++; -if (rsp_len > (sizeof (ib->outmsg) -2 )) { - ib->outmsg[0 ] =4 ; - ib->outmsg[1 ] = rsp[0 ]; - ib->outmsg[2 ] = ib->waiting_seq; - ib->outmsg[3 ] = rsp[1 ]; - ib->outmsg[4 ] =IPMI_CC_CANNOT_RETURN_REQ_NUM_BYTES ; - ib->outlen =5 ; - }else { - ib->outmsg[0 ] = rsp_len +1 ; - ib->outmsg[1 ] = rsp[0 ]; - ib->outmsg[2 ] = ib->waiting_seq; -memcpy (ib->outmsg +3 , rsp +1 , rsp_len -1 ); - ib->outlen = rsp_len +2 ; - } -IPMI_BT_SET_BBUSY (ib->control_reg,0 ); -IPMI_BT_SET_B2H_ATN (ib->control_reg,1 ); -if (ib->use_irq && ib->irqs_enabled && - !IPMI_BT_GET_B2H_IRQ (ib->mask_reg) && -IPMI_BT_GET_B2H_IRQ_EN (ib->mask_reg)) { -IPMI_BT_SET_B2H_IRQ (ib->mask_reg,1 ); -qemu_irq_raise (ib->irq); - } - } -} - - -static uint64_t ipmi_bt_ioport_read (void *opaque,hwaddr addr,unsigned size) -{ -IPMIInterface *ii = opaque; -IPMIInterfaceClass *iic =IPMI_INTERFACE_GET_CLASS (ii); -IPMIBT *ib = iic->get_backend_data (ii); -uint32_t ret =0xff ; - -switch (addr &3 ) { -case 0 : - ret = ib->control_reg; -break ; -case 1 : -if (ib->outpos < ib->outlen) { - ret = ib->outmsg[ib->outpos]; - ib->outpos++; -if (ib->outpos == ib->outlen) { - ib->outpos =0 ; - ib->outlen =0 ; - } - }else { - ret =0xff ; - } -break ; -case 2 : - ret = ib->mask_reg; -break ; - } -return ret; -} - -static void ipmi_bt_signal (IPMIBT *ib,IPMIInterface *ii) -{ -IPMIInterfaceClass *iic =IPMI_INTERFACE_GET_CLASS (ii); - - ib->do_wake =1 ; -while (ib->do_wake) { - ib->do_wake =0 ; - iic->handle_if_event (ii); - } -} - -static void ipmi_bt_ioport_write (void *opaque,hwaddr addr,uint64_t val, -unsigned size) -{ -IPMIInterface *ii = opaque; -IPMIInterfaceClass *iic =IPMI_INTERFACE_GET_CLASS (ii); -IPMIBT *ib = iic->get_backend_data (ii); - -switch (addr &3 ) { -case 0 : -if (IPMI_BT_GET_CLR_WR (val)) { - ib->inlen =0 ; - } -if (IPMI_BT_GET_CLR_RD (val)) { - ib->outpos =0 ; - } -if (IPMI_BT_GET_B2H_ATN (val)) { -IPMI_BT_SET_B2H_ATN (ib->control_reg,0 ); - } -if (IPMI_BT_GET_SMS_ATN (val)) { -IPMI_BT_SET_SMS_ATN (ib->control_reg,0 ); - } -if (IPMI_BT_GET_HBUSY (val)) { -/* Toggle */ -IPMI_BT_SET_HBUSY (ib->control_reg, - !IPMI_BT_GET_HBUSY (ib->control_reg)); - } -if (IPMI_BT_GET_H2B_ATN (val)) { -IPMI_BT_SET_BBUSY (ib->control_reg,1 ); -ipmi_bt_signal (ib, ii); - } -break ; - -case 1 : -if (ib->inlen <sizeof (ib->inmsg)) { - ib->inmsg[ib->inlen] = val; - } - ib->inlen++; -break ; - -case 2 : -if (IPMI_BT_GET_B2H_IRQ_EN (val) != -IPMI_BT_GET_B2H_IRQ_EN (ib->mask_reg)) { -if (IPMI_BT_GET_B2H_IRQ_EN (val)) { -if (IPMI_BT_GET_B2H_ATN (ib->control_reg) || -IPMI_BT_GET_SMS_ATN (ib->control_reg)) { -IPMI_BT_SET_B2H_IRQ (ib->mask_reg,1 ); -qemu_irq_raise (ib->irq); - } -IPMI_BT_SET_B2H_IRQ_EN (ib->mask_reg,1 ); - }else { -if (IPMI_BT_GET_B2H_IRQ (ib->mask_reg)) { -IPMI_BT_SET_B2H_IRQ (ib->mask_reg,0 ); -qemu_irq_lower (ib->irq); - } -IPMI_BT_SET_B2H_IRQ_EN (ib->mask_reg,0 ); - } - } -if (IPMI_BT_GET_B2H_IRQ (val) &&IPMI_BT_GET_B2H_IRQ (ib->mask_reg)) { -IPMI_BT_SET_B2H_IRQ (ib->mask_reg,0 ); -qemu_irq_lower (ib->irq); - } -break ; - } -} - -static const MemoryRegionOps ipmi_bt_io_ops = { - .read = ipmi_bt_ioport_read, - .write = ipmi_bt_ioport_write, - .impl = { - .min_access_size =1 , - .max_access_size =1 , - }, - .endianness =DEVICE_LITTLE_ENDIAN , -}; - -static void ipmi_bt_set_atn (IPMIInterface *ii,int val,int irq) -{ -IPMIInterfaceClass *iic =IPMI_INTERFACE_GET_CLASS (ii); -IPMIBT *ib = iic->get_backend_data (ii); - -if (!!val ==IPMI_BT_GET_SMS_ATN (ib->control_reg)) { -return ; - } - -IPMI_BT_SET_SMS_ATN (ib->control_reg, val); -if (val) { -if (irq && ib->use_irq && ib->irqs_enabled && - !IPMI_BT_GET_B2H_ATN (ib->control_reg) && -IPMI_BT_GET_B2H_IRQ_EN (ib->mask_reg)) { -IPMI_BT_SET_B2H_IRQ (ib->mask_reg,1 ); -qemu_irq_raise (ib->irq); - } - }else { -if (!IPMI_BT_GET_B2H_ATN (ib->control_reg) && -IPMI_BT_GET_B2H_IRQ (ib->mask_reg)) { -IPMI_BT_SET_B2H_IRQ (ib->mask_reg,0 ); -qemu_irq_lower (ib->irq); - } - } -} - -static void ipmi_bt_handle_reset (IPMIInterface *ii,bool is_cold) -{ -IPMIInterfaceClass *iic =IPMI_INTERFACE_GET_CLASS (ii); -IPMIBT *ib = iic->get_backend_data (ii); - -if (is_cold) { -/* Disable the BT interrupt on reset */ -if (IPMI_BT_GET_B2H_IRQ (ib->mask_reg)) { -IPMI_BT_SET_B2H_IRQ (ib->mask_reg,0 ); -qemu_irq_lower (ib->irq); - } -IPMI_BT_SET_B2H_IRQ_EN (ib->mask_reg,0 ); - } -} - -static void ipmi_bt_set_irq_enable (IPMIInterface *ii,int val) -{ -IPMIInterfaceClass *iic =IPMI_INTERFACE_GET_CLASS (ii); -IPMIBT *ib = iic->get_backend_data (ii); - - ib->irqs_enabled = val; -} - -static void ipmi_bt_init (IPMIInterface *ii,Error **errp) -{ -IPMIInterfaceClass *iic =IPMI_INTERFACE_GET_CLASS (ii); -IPMIBT *ib = iic->get_backend_data (ii); - - ib->io_length =3 ; - -memory_region_init_io (&ib->io,NULL , &ipmi_bt_io_ops, ii,"ipmi-bt" ,3 ); -} - -#define TYPE_ISA_IPMI_BT "isa-ipmi-bt"#define ISA_IPMI_BT (obj) OBJECT_CHECK(ISAIPMIBTDevice, (obj), \ - TYPE_ISA_IPMI_BT) + TYPE_ISA_IPMI_BT)typedef struct ISAIPMIBTDevice {ISADevice dev;int32_t isairq; +qemu_irq irq;IPMIBT bt;uint32_t uuid; }ISAIPMIBTDevice ; -static void ipmi_bt_get_fwinfo (struct IPMIInterface *ii,IPMIFwInfo *info) +static void isa_ipmi_bt_get_fwinfo (struct IPMIInterface *ii,IPMIFwInfo *info) {ISAIPMIBTDevice *iib =ISA_IPMI_BT (ii); - info->interface_name ="bt" ; - info->interface_type =IPMI_SMBIOS_BT ; - info->ipmi_spec_major_revision =2 ; - info->ipmi_spec_minor_revision =0 ; - info->base_address = iib->bt.io_base; - info->register_length = iib->bt.io_length; - info->register_spacing =1 ; - info->memspace =IPMI_MEMSPACE_IO ; - info->irq_type =IPMI_LEVEL_IRQ ; +ipmi_bt_get_fwinfo (&iib->bt, info); info->interrupt_number = iib->isairq; info->i2c_slave_address = iib->bt.bmc->slave_addr; info->uuid = iib->uuid; } -static void ipmi_bt_class_init (IPMIInterfaceClass *iic) +static void isa_ipmi_bt_raise_irq (IPMIBT *ib) { - iic->init = ipmi_bt_init; - iic->set_atn = ipmi_bt_set_atn; - iic->handle_rsp = ipmi_bt_handle_rsp; - iic->handle_if_event = ipmi_bt_handle_event; - iic->set_irq_enable = ipmi_bt_set_irq_enable; - iic->reset = ipmi_bt_handle_reset; - iic->get_fwinfo = ipmi_bt_get_fwinfo; +ISAIPMIBTDevice *iib = ib->opaque; + +qemu_irq_raise (iib->irq); +} + +static void isa_ipmi_bt_lower_irq (IPMIBT *ib) +{ +ISAIPMIBTDevice *iib = ib->opaque; + +qemu_irq_lower (iib->irq); }static void isa_ipmi_bt_realize (DeviceState *dev,Error **errp)@@ -440,14 +83,17 @@ static void isa_ipmi_bt_realize(DeviceState *dev, Error **errp) iib->uuid =ipmi_next_uuid (); iib->bt.bmc->intf = ii; + iib->bt.opaque = iib; iic->init (ii, errp);if (*errp)return ;if (iib->isairq >0 ) { -isa_init_irq (isadev, &iib->bt.irq, iib->isairq); +isa_init_irq (isadev, &iib->irq, iib->isairq); iib->bt.use_irq =1 ; + iib->bt.raise_irq = isa_ipmi_bt_raise_irq; + iib->bt.lower_irq = isa_ipmi_bt_lower_irq; }qdev_set_legacy_instance_id (dev, iib->bt.io_base, iib->bt.io_length);@@ -455,52 +101,6 @@ static void isa_ipmi_bt_realize(DeviceState *dev, Error **errp)isa_register_ioport (isadev, &iib->bt.io, iib->bt.io_base); } -static int ipmi_bt_vmstate_post_load (void *opaque,int version) -{ -IPMIBT *ib = opaque; - -/* Make sure all the values are sane. */ -if (ib->outpos >=MAX_IPMI_MSG_SIZE || ib->outlen >=MAX_IPMI_MSG_SIZE || - ib->outpos >= ib->outlen) { -qemu_log_mask (LOG_GUEST_ERROR , -"ipmi:bt: vmstate transfer received bad out values: %d %d\n" , - ib->outpos, ib->outlen); - ib->outpos =0 ; - ib->outlen =0 ; - } - -if (ib->inlen >=MAX_IPMI_MSG_SIZE ) { -qemu_log_mask (LOG_GUEST_ERROR , -"ipmi:bt: vmstate transfer received bad in value: %d\n" , - ib->inlen); - ib->inlen =0 ; - } - -return 0 ; -} - -const VMStateDescription vmstate_IPMIBT = { - .name =TYPE_IPMI_INTERFACE_PREFIX "bt" , - .version_id =1 , - .minimum_version_id =1 , - .post_load = ipmi_bt_vmstate_post_load, - .fields = (VMStateField []) { -VMSTATE_BOOL (obf_irq_set,IPMIBT ), -VMSTATE_BOOL (atn_irq_set,IPMIBT ), -VMSTATE_BOOL (irqs_enabled,IPMIBT ), -VMSTATE_UINT32 (outpos,IPMIBT ), -VMSTATE_UINT32 (outlen,IPMIBT ), -VMSTATE_UINT8_ARRAY (outmsg,IPMIBT ,MAX_IPMI_MSG_SIZE ), -VMSTATE_UINT32 (inlen,IPMIBT ), -VMSTATE_UINT8_ARRAY (inmsg,IPMIBT ,MAX_IPMI_MSG_SIZE ), -VMSTATE_UINT8 (control_reg,IPMIBT ), -VMSTATE_UINT8 (mask_reg,IPMIBT ), -VMSTATE_UINT8 (waiting_rsp,IPMIBT ), -VMSTATE_UINT8 (waiting_seq,IPMIBT ), -VMSTATE_END_OF_LIST () - } -}; -static const VMStateDescription vmstate_ISAIPMIBTDevice = { .name =TYPE_IPMI_INTERFACE_PREFIX "isa-bt" , .version_id =2 ,@@ -548,6 +148,7 @@ static void isa_ipmi_bt_class_init(ObjectClass *oc, void *data) iic->get_backend_data = isa_ipmi_bt_get_backend_data;ipmi_bt_class_init (iic); + iic->get_fwinfo = isa_ipmi_bt_get_fwinfo; }static const TypeInfo isa_ipmi_bt_info = {include/hw/ipmi/ipmi_bt.h new file +72
-0@@ -0,0 +1,72 @@ +/* +* QEMU IPMI BT emulation +* +* Copyright (c) 2015 Corey Minyard, MontaVista Software, LLC +* +* Permission is hereby granted, free of charge, to any person obtaining a copy +* of this software and associated documentation files (the "Software"), to deal +* in the Software without restriction, including without limitation the rights +* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +* copies of the Software, and to permit persons to whom the Software is +* furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in +* all copies or substantial portions of the Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN +* THE SOFTWARE. +*/ + +#ifndef HW_IPMI_BT_H +#define HW_IPMI_BT_H + +#include "hw/ipmi/ipmi.h" + +typedef struct IPMIBT { +IPMIBmc *bmc; + +bool do_wake; + +bool obf_irq_set; +bool atn_irq_set; +bool irqs_enabled; + +uint8_t outmsg[MAX_IPMI_MSG_SIZE ]; +uint32_t outpos; +uint32_t outlen; + +uint8_t inmsg[MAX_IPMI_MSG_SIZE ]; +uint32_t inlen; + +uint8_t control_reg; +uint8_t mask_reg; + +/* +* This is a response number that we send with the command to make +* sure that the response matches the command. +*/ +uint8_t waiting_rsp; +uint8_t waiting_seq; + +uint32_t io_base; +unsigned long io_length; +MemoryRegion io; + +void (*raise_irq)(struct IPMIBT *ib); +void (*lower_irq)(struct IPMIBT *ib); +void *opaque; + +bool use_irq; +}IPMIBT ; + +void ipmi_bt_get_fwinfo (IPMIBT *ik,IPMIFwInfo *info); +void ipmi_bt_class_init (IPMIInterfaceClass *iic); +extern const VMStateDescription vmstate_IPMIBT; +int ipmi_bt_vmstate_post_load (void *opaque,int version); + +#endif /* HW_IPMI_BT_H */
PATCH 9/15 ipmi: Allow a size value to be passed for I/O space
In reply to [email protected]From: Corey Minyard <[email protected]>
PCI device I/O must be >= 8 bytes in length or they don't work. Allow the size to be passed in, the default size of 2 or 3 won't work.
--- hw/ipmi/ipmi_bt.c | 19 +++++++++++++++---- hw/ipmi/ipmi_kcs.c | 23 +++++++++++++++++++---- hw/ipmi/isa_ipmi_bt.c | 2 +- hw/ipmi/isa_ipmi_kcs.c | 2 +- include/hw/ipmi/ipmi.h | 7 ++++++- include/hw/ipmi/ipmi_bt.h | 1 + include/hw/ipmi/ipmi_kcs.h | 1 + 7 files changed, 44 insertions(+), 11 deletions(-)
hw/ipmi/ipmi_bt.c +15 -4
@@ -189,7 +189,7 @@ static uint64_t ipmi_bt_ioport_read(void *opaque, hwaddr addr, unsigned size)IPMIBT *ib = iic->get_backend_data (ii);uint32_t ret =0xff ; -switch (addr &3 ) { +switch (addr & ib->size_mask) {case 0 : ret = ib->control_reg;break ;
@@ -208,6 +208,9 @@ static uint64_t ipmi_bt_ioport_read(void *opaque, hwaddr addr, unsigned size)case 2 : ret = ib->mask_reg;break ; +default : + ret =0xff ; +break ; }return ret; }
@@ -230,7 +233,7 @@ static void ipmi_bt_ioport_write(void *opaque, hwaddr addr, uint64_t val,IPMIInterfaceClass *iic =IPMI_INTERFACE_GET_CLASS (ii);IPMIBT *ib = iic->get_backend_data (ii); -switch (addr &3 ) { +switch (addr & ib->size_mask) {case 0 :if (IPMI_BT_GET_CLR_WR (val)) { ib->inlen =0 ;
@@ -285,6 +288,9 @@ static void ipmi_bt_ioport_write(void *opaque, hwaddr addr, uint64_t val,ipmi_bt_lower_irq (ib); }break ; +default : +/* Ignore. */ +break ; } }
@@ -346,14 +352,19 @@ static void ipmi_bt_set_irq_enable(IPMIInterface *ii, int val) ib->irqs_enabled = val; } -static void ipmi_bt_init (IPMIInterface *ii,Error **errp) +static void ipmi_bt_init (IPMIInterface *ii,unsigned int min_size,Error **errp) {IPMIInterfaceClass *iic =IPMI_INTERFACE_GET_CLASS (ii);IPMIBT *ib = iic->get_backend_data (ii); +if (min_size ==0 ) { + min_size =4 ; + } + ib->size_mask = min_size -1 ; ib->io_length =3 ; -memory_region_init_io (&ib->io,NULL , &ipmi_bt_io_ops, ii,"ipmi-bt" ,3 ); +memory_region_init_io (&ib->io,NULL , &ipmi_bt_io_ops, ii,"ipmi-bt" , + min_size); }int ipmi_bt_vmstate_post_load (void *opaque,int version)
hw/ipmi/ipmi_kcs.c +19 -4
@@ -232,7 +232,7 @@ static uint64_t ipmi_kcs_ioport_read(void *opaque, hwaddr addr, unsigned size)IPMIKCS *ik = iic->get_backend_data (ii);uint32_t ret; -switch (addr &1 ) { +switch (addr & ik->size_mask) {case 0 : ret = ik->data_out_reg;IPMI_KCS_SET_OBF (ik->status_reg,0 );
@@ -243,6 +243,7 @@ static uint64_t ipmi_kcs_ioport_read(void *opaque, hwaddr addr, unsigned size) } }break ; +case 1 : ret = ik->status_reg;if (ik->atn_irq_set) {
@@ -252,6 +253,9 @@ static uint64_t ipmi_kcs_ioport_read(void *opaque, hwaddr addr, unsigned size) } }break ; + +default : + ret =0xff ; }return ret; }
@@ -267,7 +271,7 @@ static void ipmi_kcs_ioport_write(void *opaque, hwaddr addr, uint64_t val,return ; } -switch (addr &1 ) { +switch (addr & ik->size_mask) {case 0 : ik->data_in_reg = val;break ;
@@ -275,6 +279,10 @@ static void ipmi_kcs_ioport_write(void *opaque, hwaddr addr, uint64_t val,case 1 : ik->cmd_reg = val;break ; + +default : +/* Ignore. */ +break ; }IPMI_KCS_SET_IBF (ik->status_reg,1 );ipmi_kcs_signal (ik, ii);
@@ -321,13 +329,20 @@ static void ipmi_kcs_set_irq_enable(IPMIInterface *ii, int val) ik->irqs_enabled = val; } -static void ipmi_kcs_init (IPMIInterface *ii,Error **errp) +/* min_size must be a power of 2. */ +static void ipmi_kcs_init (IPMIInterface *ii,unsigned int min_size, +Error **errp) {IPMIInterfaceClass *iic =IPMI_INTERFACE_GET_CLASS (ii);IPMIKCS *ik = iic->get_backend_data (ii); +if (min_size ==0 ) { + min_size =2 ; + } + ik->size_mask = min_size -1 ; ik->io_length =2 ; -memory_region_init_io (&ik->io,NULL , &ipmi_kcs_io_ops, ii,"ipmi-kcs" ,2 ); +memory_region_init_io (&ik->io,NULL , &ipmi_kcs_io_ops, ii,"ipmi-kcs" , + min_size); }int ipmi_kcs_vmstate_post_load (void *opaque,int version)
hw/ipmi/isa_ipmi_bt.c +1 -1
@@ -85,7 +85,7 @@ static void isa_ipmi_bt_realize(DeviceState *dev, Error **errp) iib->bt.bmc->intf = ii; iib->bt.opaque = iib; - iic->init (ii, errp); + iic->init (ii,0 , errp);if (*errp)return ;
hw/ipmi/isa_ipmi_kcs.c +1 -1
@@ -84,7 +84,7 @@ static void ipmi_isa_realize(DeviceState *dev, Error **errp) iik->kcs.bmc->intf = ii; iik->kcs.opaque = iik; - iic->init (ii, errp); + iic->init (ii,0 , errp);if (*errp)return ;
include/hw/ipmi/ipmi.h +6 -1
@@ -118,7 +118,12 @@ typedef struct IPMIInterface IPMIInterface; typedef struct IPMIInterfaceClass { InterfaceClass parent; - void (*init)(struct IPMIInterface *s, Error **errp); + /* + * min_size is the requested I/O size and must be a power of 2. + * This is so PCI (or other busses) can request a bigger range. + * Use 0 for the default. + */ + void (*init)(struct IPMIInterface *s, unsigned int min_size, Error **errp); /* * Perform various operations on the hardware. If checkonly is
include/hw/ipmi/ipmi_bt.h +1 -0
@@ -56,6 +56,7 @@ typedef struct IPMIBT {uint32_t io_base;unsigned long io_length;MemoryRegion io; +unsigned long size_mask;void (*raise_irq)(struct IPMIBT *ib);void (*lower_irq)(struct IPMIBT *ib);
include/hw/ipmi/ipmi_kcs.h +1 -0
@@ -59,6 +59,7 @@ typedef struct IPMIKCS {uint32_t io_base;unsigned long io_length;MemoryRegion io; +unsigned long size_mask;void (*raise_irq)(struct IPMIKCS *ik);void (*lower_irq)(struct IPMIKCS *ik);
Signature · 1 line
2.17.1
PATCH 10/15 smbios:ipmi: Ignore IPMI devices with no fwinfo function
In reply to [email protected]From: Corey Minyard <[email protected]>
Not all devices have fwinfo (like the coming PCI one), so ignore them if the their fwinfo function is NULL.
--- hw/smbios/smbios_type_38.c | 3 +++ 1 file changed, 3 insertions(+)
hw/smbios/smbios_type_38.c +3 -0
@@ -94,6 +94,9 @@ static void smbios_add_ipmi_devices(BusState *bus) ii =IPMI_INTERFACE (obj); iic =IPMI_INTERFACE_GET_CLASS (obj);memset (&info,0 ,sizeof (info)); +if (!iic->get_fwinfo) { +continue ; + } iic->get_fwinfo (ii, &info);smbios_build_one_type_38 (&info);continue ;
Signature · 1 line
2.17.1
PATCH 11/15 ipmi: Add PCI IPMI interfaces
In reply to [email protected]From: Corey Minyard <[email protected]>
Pretty straightforward, just hook the current KCS and BT code into the PCI system with the proper configuration.
--- default-configs/i386-softmmu.mak | 2 + hw/i386/Kconfig | 2 + hw/ipmi/Kconfig | 10 +++ hw/ipmi/Makefile.objs | 2 + hw/ipmi/pci_ipmi_bt.c | 146 +++++++++++++++++++++++++++++++ hw/ipmi/pci_ipmi_kcs.c | 146 +++++++++++++++++++++++++++++++ include/hw/pci/pci.h | 1 + 7 files changed, 309 insertions(+) create mode 100644 hw/ipmi/pci_ipmi_bt.c create mode 100644 hw/ipmi/pci_ipmi_kcs.c
default-configs/i386-softmmu.mak +2 -0
@@ -10,6 +10,8 @@ #CONFIG_ISA_DEBUG=n #CONFIG_ISA_IPMI_BT=n #CONFIG_ISA_IPMI_KCS=n +#CONFIG_PCI_IPMI_KCS=n +#CONFIG_PCI_IPMI_BT=n #CONFIG_PCI_DEVICES=n #CONFIG_PVPANIC=n #CONFIG_QXL=n
hw/i386/Kconfig +2 -0
@@ -8,6 +8,8 @@ config PC imply HYPERV imply ISA_IPMI_KCS imply ISA_IPMI_BT + imply PCI_IPMI_KCS + imply PCI_IPMI_BT imply ISA_DEBUG imply PARALLEL imply PCI_DEVICES
hw/ipmi/Kconfig +10 -0
@@ -20,3 +20,13 @@ config ISA_IPMI_BT bool depends on ISA_BUS select IPMI + +config PCI_IPMI_KCS + bool + depends on PCI + select IPMI + +config PCI_IPMI_BT + bool + depends on PCI + select IPMI
hw/ipmi/Makefile.objs +2 -0
@@ -2,4 +2,6 @@ common-obj-$(CONFIG_IPMI) += ipmi.o ipmi_kcs.o ipmi_bt.o common-obj-$(CONFIG_IPMI_LOCAL) += ipmi_bmc_sim.o common-obj-$(CONFIG_IPMI_EXTERN) += ipmi_bmc_extern.o common-obj-$(CONFIG_ISA_IPMI_KCS) += isa_ipmi_kcs.o +common-obj-$(CONFIG_PCI_IPMI_KCS) += pci_ipmi_kcs.o common-obj-$(CONFIG_ISA_IPMI_BT) += isa_ipmi_bt.o +common-obj-$(CONFIG_PCI_IPMI_BT) += pci_ipmi_bt.o
hw/ipmi/pci_ipmi_bt.c new file +146 -0
146 lines not on this page · raw message
hw/ipmi/pci_ipmi_kcs.c new file +146 -0
146 lines not on this page · raw message
include/hw/pci/pci.h +1 -0
@@ -55,6 +55,7 @@ extern bool pci_available;/* QEMU/Bochs VGA (0x1234) */ #define PCI_VENDOR_ID_QEMU 0x1234#define PCI_DEVICE_ID_QEMU_VGA 0x1111 +#define PCI_DEVICE_ID_QEMU_IPMI 0x1112/* VMWare (0x15ad) */ #define PCI_VENDOR_ID_VMWARE 0x15ad
Signature · 1 line
2.17.1
PATCH 12/15 ipmi: Add an SMBus IPMI interface
In reply to [email protected]From: Corey Minyard <[email protected]>
--- default-configs/i386-softmmu.mak | 1 + hw/i386/Kconfig | 1 + hw/ipmi/Kconfig | 5 + hw/ipmi/Makefile.objs | 1 + hw/ipmi/smbus_ipmi.c | 384 +++++++++++++++++++++++++++++++ 5 files changed, 392 insertions(+) create mode 100644 hw/ipmi/smbus_ipmi.c
default-configs/i386-softmmu.mak +1 -0
@@ -12,6 +12,7 @@ #CONFIG_ISA_IPMI_KCS=n #CONFIG_PCI_IPMI_KCS=n #CONFIG_PCI_IPMI_BT=n +#CONFIG_IPMI_SSIF=n #CONFIG_PCI_DEVICES=n #CONFIG_PVPANIC=n #CONFIG_QXL=n
hw/i386/Kconfig +1 -0
@@ -10,6 +10,7 @@ config PC imply ISA_IPMI_BT imply PCI_IPMI_KCS imply PCI_IPMI_BT + imply IPMI_SSIF imply ISA_DEBUG imply PARALLEL imply PCI_DEVICES
hw/ipmi/Kconfig +5 -0
@@ -30,3 +30,8 @@ config PCI_IPMI_BT bool depends on PCI select IPMI + +config IPMI_SSIF + bool + depends on I2C + select IPMI
hw/ipmi/Makefile.objs +1 -0
@@ -5,3 +5,4 @@ common-obj-$(CONFIG_ISA_IPMI_KCS) += isa_ipmi_kcs.o common-obj-$(CONFIG_PCI_IPMI_KCS) += pci_ipmi_kcs.o common-obj-$(CONFIG_ISA_IPMI_BT) += isa_ipmi_bt.o common-obj-$(CONFIG_PCI_IPMI_BT) += pci_ipmi_bt.o +common-obj-$(CONFIG_IPMI_SSIF) += smbus_ipmi.o
hw/ipmi/smbus_ipmi.c new file +384 -0
384 lines not on this page · raw message
Signature · 1 line
2.17.1
PATCH 13/15 acpi: Add i2c serial bus CRS handling
In reply to [email protected]From: Corey Minyard <[email protected]>
This will be required for getting IPMI SSIF (SMBus interface) into the ACPI tables.
--- hw/acpi/aml-build.c | 40 +++++++++++++++++++++++++++++++++++++ include/hw/acpi/aml-build.h | 18 +++++++++++++++++ 2 files changed, 58 insertions(+)
hw/acpi/aml-build.c +40 -0
@@ -1870,3 +1870,43 @@ build_hdr:build_header (linker, tbl, (void *)(tbl->data + fadt_start),"FACP" , tbl->len - fadt_start, f->rev, oem_id, oem_table_id); } + +/* ACPI 5.0: 6.4.3.8.2 Serial Bus Connection Descriptors */ +static Aml *aml_serial_bus_device (uint8_t serial_bus_type,uint8_t flags, +uint16_t type_flags, +uint8_t revid,uint16_t data_length, +uint16_t resource_source_len) +{ +Aml *var =aml_alloc (); +uint16_t length = data_length + resource_source_len +9 ; + +build_append_byte (var->buf,0x8e );/* Serial Bus Connection Descriptor */ +build_append_int_noprefix (var->buf, length,sizeof (length)); +build_append_byte (var->buf,1 );/* Revision ID */ +build_append_byte (var->buf,0 );/* Resource Source Index */ +build_append_byte (var->buf, serial_bus_type);/* Serial Bus Type */ +build_append_byte (var->buf, flags);/* General Flags */ +build_append_int_noprefix (var->buf, type_flags,/* Type Specific Flags */ +sizeof (type_flags)); +build_append_byte (var->buf, revid);/* Type Specification Revision ID */ +build_append_int_noprefix (var->buf, data_length,sizeof (data_length)); + +return var; +} + +/* ACPI 5.0: 6.4.3.8.2.1 I2C Serial Bus Connection Resource Descriptor */ +Aml *aml_i2c_serial_bus_device (uint16_t address,const char *resource_source) +{ +uint16_t resource_source_len =strlen (resource_source) +1 ; +Aml *var =aml_serial_bus_device (AML_SERIAL_BUS_TYPE_I2C ,0 ,0 ,1 , +6 , resource_source_len); + +/* Connection Speed. Just set to 100K for now, it doesn't really matter. */ +build_append_int_noprefix (var->buf,100000 ,4 ); +build_append_int_noprefix (var->buf, address,sizeof (address)); + +/* This is a string, not a name, so just copy it directly in. */ +g_array_append_vals (var->buf, resource_source, resource_source_len); + +return var; +}
include/hw/acpi/aml-build.h +18 -0
@@ -223,6 +223,23 @@ struct AcpiBuildTables {BIOSLinker *linker; } AcpiBuildTables; +/* +* ACPI 5.0: 6.4.3.8.2 Serial Bus Connection Descriptors +* Serial Bus Type +*/ +#define AML_SERIAL_BUS_TYPE_I2C 1 +#define AML_SERIAL_BUS_TYPE_SPI 2 +#define AML_SERIAL_BUS_TYPE_UART 3 + +/* +* ACPI 5.0: 6.4.3.8.2 Serial Bus Connection Descriptors +* General Flags +*/ +/* Slave Mode */ +#define AML_SERIAL_BUS_FLAG_MASTER_DEVICE (1 << 0) +/* Consumer/Producer */ +#define AML_SERIAL_BUS_FLAG_CONSUME_ONLY (1 << 1) +/** * init_aml_allocator: *
@@ -347,6 +364,7 @@ Aml *aml_qword_memory(AmlDecode dec, AmlMinFixed min_fixed,Aml *aml_dma (AmlDmaType typ,AmlDmaBusMaster bm,AmlTransferSize sz,uint8_t channel);Aml *aml_sleep (uint64_t msec); +Aml *aml_i2c_serial_bus_device (uint16_t address,const char *resource_source);/* Block AML object primitives */ Aml *aml_scope (const char *name_format, ...)GCC_FMT_ATTR (1 ,2 );
Signature · 1 line
2.17.1
PATCH 14/15 ipmi: Fix SSIF ACPI handling to use the right CRS
In reply to [email protected]From: Corey Minyard <[email protected]>
Pass in the CRS so that it can be set to the SMBus for IPMI later.
--- hw/acpi/ipmi-stub.c | 2 +- hw/acpi/ipmi.c | 13 +++++++------ hw/i386/acpi-build.c | 2 +- include/hw/acpi/ipmi.h | 2 +- 4 files changed, 10 insertions(+), 9 deletions(-)
hw/acpi/ipmi-stub.c +1 -1
@@ -10,6 +10,6 @@#include "qemu/osdep.h" #include "hw/acpi/ipmi.h" -void build_acpi_ipmi_devices (Aml *table,BusState *bus) +void build_acpi_ipmi_devices (Aml *table,BusState *bus,const char *resource) { }
hw/acpi/ipmi.c +7 -6
@@ -13,7 +13,7 @@#include "hw/acpi/acpi.h" #include "hw/acpi/ipmi.h" -static Aml *aml_ipmi_crs (IPMIFwInfo *info) +static Aml *aml_ipmi_crs (IPMIFwInfo *info,const char *resource) {Aml *crs =aml_resource_template ();
@@ -48,7 +48,8 @@ static Aml *aml_ipmi_crs(IPMIFwInfo *info) info->register_spacing, info->register_length));break ;case IPMI_MEMSPACE_SMBUS : -aml_append (crs,aml_return (aml_int (info->base_address))); +aml_append (crs,aml_i2c_serial_bus_device (info->base_address, + resource));break ;default :abort ();
@@ -61,7 +62,7 @@ static Aml *aml_ipmi_crs(IPMIFwInfo *info)return crs; } -static Aml *aml_ipmi_device (IPMIFwInfo *info) +static Aml *aml_ipmi_device (IPMIFwInfo *info,const char *resource) {Aml *dev; uint16_t version = ((info->ipmi_spec_major_revision << 8)
@@ -74,14 +75,14 @@ static Aml *aml_ipmi_device(IPMIFwInfo *info)aml_append (dev,aml_name_decl ("_STR" ,aml_string ("ipmi_%s" , info->interface_name)));aml_append (dev,aml_name_decl ("_UID" ,aml_int (info->uuid))); -aml_append (dev,aml_name_decl ("_CRS" ,aml_ipmi_crs (info))); +aml_append (dev,aml_name_decl ("_CRS" ,aml_ipmi_crs (info, resource)));aml_append (dev,aml_name_decl ("_IFT" ,aml_int (info->interface_type)));aml_append (dev,aml_name_decl ("_SRV" ,aml_int (version)));return dev; } -void build_acpi_ipmi_devices (Aml *scope,BusState *bus) +void build_acpi_ipmi_devices (Aml *scope,BusState *bus,const char *resource) {BusChild *kid;
@@ -101,6 +102,6 @@ void build_acpi_ipmi_devices(Aml *scope, BusState *bus) iic =IPMI_INTERFACE_GET_CLASS (obj);memset (&info,0 ,sizeof (info)); iic->get_fwinfo (ii, &info); -aml_append (scope,aml_ipmi_device (&info)); +aml_append (scope,aml_ipmi_device (&info, resource)); } }
hw/i386/acpi-build.c +1 -1
@@ -1290,7 +1290,7 @@ static void build_isa_devices_aml(Aml *table) }else if (!obj) {error_report ("No ISA bus, unable to define IPMI ACPI data" ); }else { -build_acpi_ipmi_devices (scope,BUS (obj)); +build_acpi_ipmi_devices (scope,BUS (obj),"\\_SB.PCI0.ISA" ); }aml_append (table, scope);
include/hw/acpi/ipmi.h +1 -1
@@ -16,6 +16,6 @@* bus matches the given bus. The resource is the ACPI resource that * contains the IPMI device, this is required for the I2C CRS. */ -void build_acpi_ipmi_devices (Aml *table,BusState *bus); +void build_acpi_ipmi_devices (Aml *table,BusState *bus,const char *resource);#endif /* HW_ACPI_IPMI_H */
Signature · 1 line
2.17.1
PATCH 15/15 pc: Add an SMB0 ACPI device to q35
In reply to [email protected]From: Corey Minyard <[email protected]>
This is so I2C devices can be found in the ACPI namespace. Currently that's only IPMI, but devices can be easily added now.
Adding the devices required some PCI information, and the bus itself to be added to the PCMachineState structure.
Note that this only works on Q35, the ACPI for PIIX4 is not capable of handling an SMBus device.
--- hw/i386/acpi-build.c | 15 +++++++++++++++ hw/i386/pc_piix.c | 12 ++++++------ hw/i386/pc_q35.c | 9 +++++---- include/hw/i386/pc.h | 2 ++ tests/data/acpi/q35/DSDT | Bin 7841 -> 7879 bytes tests/data/acpi/q35/DSDT.bridge | Bin 7858 -> 7896 bytes tests/data/acpi/q35/DSDT.cphp | Bin 8304 -> 8342 bytes tests/data/acpi/q35/DSDT.dimmpxm | Bin 9494 -> 9532 bytes tests/data/acpi/q35/DSDT.ipmibt | Bin 7916 -> 7954 bytes tests/data/acpi/q35/DSDT.memhp | Bin 9200 -> 9238 bytes tests/data/acpi/q35/DSDT.mmio64 | Bin 8971 -> 9009 bytes tests/data/acpi/q35/DSDT.numamem | Bin 7847 -> 7885 bytes 12 files changed, 28 insertions(+), 10 deletions(-)
hw/i386/acpi-build.c +15 -0
@@ -1809,6 +1809,18 @@ static Aml *build_q35_osc_method(void)return method; } +static void build_smb0 (Aml *table,I2CBus *smbus,int devnr,int func) +{ +Aml *scope =aml_scope ("_SB.PCI0" ); +Aml *dev =aml_device ("SMB0" ); + +aml_append (dev,aml_name_decl ("_HID" ,aml_eisaid ("APP0005" ))); +aml_append (dev,aml_name_decl ("_ADR" ,aml_int (devnr <<16 | func))); +build_acpi_ipmi_devices (dev,BUS (smbus),"\\_SB.PCI0.SMB0" ); +aml_append (scope, dev); +aml_append (table, scope); +} + static void build_dsdt(GArray *table_data, BIOSLinker *linker, AcpiPmInfo *pm, AcpiMiscInfo *misc,
@@ -1862,6 +1874,9 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,build_q35_isa_bridge (dsdt);build_isa_devices_aml (dsdt);build_q35_pci0_int (dsdt); +if (pcms->smbus && !pcmc->do_not_add_smb_acpi) { +build_smb0 (dsdt, pcms->smbus,ICH9_SMB_DEV ,ICH9_SMB_FUNC ); + } }if (pcmc->legacy_cpu_hotplug) {
hw/i386/pc_piix.c +6 -6
@@ -283,15 +283,14 @@ else {if (pcmc->pci_enabled && acpi_enabled) {DeviceState *piix4_pm; -I2CBus *smbus; smi_irq =qemu_allocate_irq (pc_acpi_smi_interrupt, first_cpu,0 );/* TODO: Populate SPD eeprom data. */ - smbus =piix4_pm_init (pci_bus, piix3_devfn +3 ,0xb100 , - pcms->gsi[9 ], smi_irq, -pc_machine_is_smm_enabled (pcms), - &piix4_pm); -smbus_eeprom_init (smbus,8 ,NULL ,0 ); + pcms->smbus =piix4_pm_init (pci_bus, piix3_devfn +3 ,0xb100 , + pcms->gsi[9 ], smi_irq, +pc_machine_is_smm_enabled (pcms), + &piix4_pm); +smbus_eeprom_init (pcms->smbus,8 ,NULL ,0 ); object_property_add_link(OBJECT(machine), PC_MACHINE_ACPI_DEVICE_PROP, TYPE_HOTPLUG_HANDLER,
@@ -464,6 +463,7 @@ static void pc_i440fx_3_1_machine_options(MachineClass *m)pc_i440fx_4_0_machine_options (m); m->is_default =0 ; + pcmc->do_not_add_smb_acpi = true; m->smbus_no_migration_support = true; m->alias =NULL ; pcmc->pvh_enabled = false;
hw/i386/pc_q35.c +5 -4
@@ -316,10 +316,10 @@ static void pc_q35_init(MachineState *machine)if (pcms->smbus_enabled) {/* TODO: Populate SPD eeprom data. */ -smbus_eeprom_init (ich9_smb_init (host_bus, -PCI_DEVFN (ICH9_SMB_DEV ,ICH9_SMB_FUNC ), -0xb100 ), -8 ,NULL ,0 ); + pcms->smbus =ich9_smb_init (host_bus, +PCI_DEVFN (ICH9_SMB_DEV ,ICH9_SMB_FUNC ), +0xb100 ); +smbus_eeprom_init (pcms->smbus,8 ,NULL ,0 ); }pc_cmos_init (pcms, idebus[0 ], idebus[1 ], rtc_state);
@@ -410,6 +410,7 @@ static void pc_q35_3_1_machine_options(MachineClass *m)pc_q35_4_0_machine_options (m); m->default_kernel_irqchip_split = false; + pcmc->do_not_add_smb_acpi = true; m->smbus_no_migration_support = true; m->alias =NULL ; pcmc->pvh_enabled = false;
include/hw/i386/pc.h +2 -0
@@ -38,6 +38,7 @@ struct PCMachineState {HotplugHandler *acpi_dev;ISADevice *rtc;PCIBus *bus; +I2CBus *smbus;FWCfgState *fw_cfg;qemu_irq *gsi;PFlashCFI01 *flash[2 ];
@@ -116,6 +117,7 @@ typedef struct PCMachineClass {bool rsdp_in_ram;int legacy_acpi_table_size;unsigned acpi_data_size; +bool do_not_add_smb_acpi;/* SMBIOS compat: */ bool smbios_defaults;
tests/data/acpi/q35/DSDT binary +0 -0
tests/data/acpi/q35/DSDT.bridge binary +0 -0
tests/data/acpi/q35/DSDT.cphp binary +0 -0
tests/data/acpi/q35/DSDT.dimmpxm binary +0 -0
tests/data/acpi/q35/DSDT.ipmibt binary +0 -0
tests/data/acpi/q35/DSDT.memhp binary +0 -0
tests/data/acpi/q35/DSDT.mmio64 binary +0 -0
tests/data/acpi/q35/DSDT.numamem binary +0 -0
Signature · 1 line
2.17.1
Re: [Qemu-devel] [PATCH 15/15] pc: Add an SMB0 ACPI device to q35
Quoted 10 lines · On Mon, Aug 19, 2019 at 03:17:05PM -0500, [email protected] wrote:
From: Corey Minyard <[email protected]>
This is so I2C devices can be found in the ACPI namespace. Currently that's only IPMI, but devices can be easily added now.
Adding the devices required some PCI information, and the bus itself to be added to the PCMachineState structure.
Note that this only works on Q35, the ACPI for PIIX4 is not capable of handling an SMBus device.
I haven't recevied any comments on this, and it seems like something some people should review. Is this ok?
Thanks
-corey
Quoted 215 lines
Cc Michael S. Tsirkin <[email protected]>Cc Igor Mammedov <[email protected]>Signed-off-by Corey Minyard <[email protected]>--- hw/i386/acpi-build.c | 15 +++++++++++++++ hw/i386/pc_piix.c | 12 ++++++------ hw/i386/pc_q35.c | 9 +++++---- include/hw/i386/pc.h | 2 ++ tests/data/acpi/q35/DSDT | Bin 7841 -> 7879 bytes tests/data/acpi/q35/DSDT.bridge | Bin 7858 -> 7896 bytes tests/data/acpi/q35/DSDT.cphp | Bin 8304 -> 8342 bytes tests/data/acpi/q35/DSDT.dimmpxm | Bin 9494 -> 9532 bytes tests/data/acpi/q35/DSDT.ipmibt | Bin 7916 -> 7954 bytes tests/data/acpi/q35/DSDT.memhp | Bin 9200 -> 9238 bytes tests/data/acpi/q35/DSDT.mmio64 | Bin 8971 -> 9009 bytes tests/data/acpi/q35/DSDT.numamem | Bin 7847 -> 7885 bytes 12 files changed, 28 insertions(+), 10 deletions(-)hw/i386/acpi-build.c +15
-0@@ -1809,6 +1809,18 @@ static Aml *build_q35_osc_method(void)return method; } +static void build_smb0 (Aml *table,I2CBus *smbus,int devnr,int func) +{ +Aml *scope =aml_scope ("_SB.PCI0" ); +Aml *dev =aml_device ("SMB0" ); + +aml_append (dev,aml_name_decl ("_HID" ,aml_eisaid ("APP0005" ))); +aml_append (dev,aml_name_decl ("_ADR" ,aml_int (devnr <<16 | func))); +build_acpi_ipmi_devices (dev,BUS (smbus),"\\_SB.PCI0.SMB0" ); +aml_append (scope, dev); +aml_append (table, scope); +} + static void build_dsdt(GArray *table_data, BIOSLinker *linker, AcpiPmInfo *pm, AcpiMiscInfo *misc,@@ -1862,6 +1874,9 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,build_q35_isa_bridge (dsdt);build_isa_devices_aml (dsdt);build_q35_pci0_int (dsdt); +if (pcms->smbus && !pcmc->do_not_add_smb_acpi) { +build_smb0 (dsdt, pcms->smbus,ICH9_SMB_DEV ,ICH9_SMB_FUNC ); + } }if (pcmc->legacy_cpu_hotplug) {hw/i386/pc_piix.c +6
-6@@ -283,15 +283,14 @@ else {if (pcmc->pci_enabled && acpi_enabled) {DeviceState *piix4_pm; -I2CBus *smbus; smi_irq =qemu_allocate_irq (pc_acpi_smi_interrupt, first_cpu,0 );/* TODO: Populate SPD eeprom data. */ - smbus =piix4_pm_init (pci_bus, piix3_devfn +3 ,0xb100 , - pcms->gsi[9 ], smi_irq, -pc_machine_is_smm_enabled (pcms), - &piix4_pm); -smbus_eeprom_init (smbus,8 ,NULL ,0 ); + pcms->smbus =piix4_pm_init (pci_bus, piix3_devfn +3 ,0xb100 , + pcms->gsi[9 ], smi_irq, +pc_machine_is_smm_enabled (pcms), + &piix4_pm); +smbus_eeprom_init (pcms->smbus,8 ,NULL ,0 ); object_property_add_link(OBJECT(machine), PC_MACHINE_ACPI_DEVICE_PROP, TYPE_HOTPLUG_HANDLER,@@ -464,6 +463,7 @@ static void pc_i440fx_3_1_machine_options(MachineClass *m)pc_i440fx_4_0_machine_options (m); m->is_default =0 ; + pcmc->do_not_add_smb_acpi = true; m->smbus_no_migration_support = true; m->alias =NULL ; pcmc->pvh_enabled = false;hw/i386/pc_q35.c +5
-4@@ -316,10 +316,10 @@ static void pc_q35_init(MachineState *machine)if (pcms->smbus_enabled) {/* TODO: Populate SPD eeprom data. */ -smbus_eeprom_init (ich9_smb_init (host_bus, -PCI_DEVFN (ICH9_SMB_DEV ,ICH9_SMB_FUNC ), -0xb100 ), -8 ,NULL ,0 ); + pcms->smbus =ich9_smb_init (host_bus, +PCI_DEVFN (ICH9_SMB_DEV ,ICH9_SMB_FUNC ), +0xb100 ); +smbus_eeprom_init (pcms->smbus,8 ,NULL ,0 ); }pc_cmos_init (pcms, idebus[0 ], idebus[1 ], rtc_state);@@ -410,6 +410,7 @@ static void pc_q35_3_1_machine_options(MachineClass *m)pc_q35_4_0_machine_options (m); m->default_kernel_irqchip_split = false; + pcmc->do_not_add_smb_acpi = true; m->smbus_no_migration_support = true; m->alias =NULL ; pcmc->pvh_enabled = false;include/hw/i386/pc.h +2
-0@@ -38,6 +38,7 @@ struct PCMachineState {HotplugHandler *acpi_dev;ISADevice *rtc;PCIBus *bus; +I2CBus *smbus;FWCfgState *fw_cfg;qemu_irq *gsi;PFlashCFI01 *flash[2 ];@@ -116,6 +117,7 @@ typedef struct PCMachineClass {bool rsdp_in_ram;int legacy_acpi_table_size;unsigned acpi_data_size; +bool do_not_add_smb_acpi;/* SMBIOS compat: */ bool smbios_defaults;tests/data/acpi/q35/DSDT binary +0
-0tests/data/acpi/q35/DSDT.bridge binary +0
-0tests/data/acpi/q35/DSDT.cphp binary +0
-0tests/data/acpi/q35/DSDT.dimmpxm binary +0
-0tests/data/acpi/q35/DSDT.ipmibt binary +0
-0tests/data/acpi/q35/DSDT.memhp binary +0
-0tests/data/acpi/q35/DSDT.mmio64 binary +0
-0tests/data/acpi/q35/DSDT.numamem binary +0
-0Signature · 2 lines
-- 2.17.1