hw/char/bcm2835_aux: Provide full 16550 UART support
Subsystems (2)
cover hw/char/bcm2835_aux: Provide full 16550 UART support
Hi,
Since there has been some activity on the list asking about Rasberry PI USB support, I had a look a some previous unfinished work and rebased it to share, in case it helps hobbyist interested in improving these machines.
This series is some proof-of-concept on improving the AUX UART support. See the commit description for various TODO/questions.
This can be tested using files documented by Peter Maydell in his blog post:
https://translatedcode.wordpress.com/2018/04/25/debian-on-qemus-raspberry-pi-3-model/
And using the kernel command line arguments suggested by Guenter Roeck:
qemu-system-aarch64 -M raspi3 -m 1024 \
-kernel raspi3/bootpart/vmlinuz-4.14.0-3-arm64 \
-initrd raspi3/bootpart/initrd.img-4.14.0-3-arm64 \
-dtb raspi3/bootpart/bcm2837-rpi-3-b.dtb \
-append 'earlycon=uart8250,mmio32,0x3f215040 rdinit=/sbin/init panic=-1 console=ttyS1,115200' \
-drive file=raspi3/2018-01-08-raspberry-pi-3-buster-PREVIEW.img,format=raw,if=sd \
-serial null -serial stdio \
-d unimp,guest_errors -trace bcm283\*
[email protected]:bcm2835_sdhost_edm_change (device reset) EDM now 0xc60f
[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.0-3-arm64 ([email protected]) (gcc version 7.2.0 (Debian 7.2.0-18)) #1 SMP Debian 4.14.12-2 (2018-01-06) [ 0.000000] Boot CPU: AArch64 Processor [410fd034] [ 0.000000] Machine model: Raspberry Pi 3 Model B [ 0.000000] earlycon: uart8250 at MMIO32 0x000000003f215040 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x0000000038000000 [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000003bffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x37fdf180-0x37fe0c7f] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000003bffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003bffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003bffffff] [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 22 pages/cpu @ffff800037f74000 s51608 r8192 d30312 u90112 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 241920 [ 0.000000] Policy zone: DMA [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0x3f215040 rdinit=/sbin/init panic=-1 console=ttyS1,115200 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Memory: 864772K/983040K available (8252K kernel code, 1448K rwdata, 2692K rodata, 4480K init, 601K bss, 52732K reserved, 65536K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB) [ 0.000000] .text : 0xffff000008080000 - 0xffff000008890000 ( 8256 KB) [ 0.000000] .rodata : 0xffff000008890000 - 0xffff000008b40000 ( 2752 KB) [ 0.000000] .init : 0xffff000008b40000 - 0xffff000008fa0000 ( 4480 KB) [ 0.000000] .data : 0xffff000008fa0000 - 0xffff00000910a200 ( 1449 KB) [ 0.000000] .bss : 0xffff00000910a200 - 0xffff0000091a0910 ( 602 KB) [ 0.000000] fixed : 0xffff7dfffe7fd000 - 0xffff7dfffec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum) [ 0.000000] 0xffff7e0000000000 - 0xffff7e0000f00000 ( 15 MB actual) [ 0.000000] memory : 0xffff800000000000 - 0xffff80003c000000 ( 960 MB) [ 0.000000] ftrace: allocating 30760 entries in 121 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 bcm2836_control_write: Bad offset 0 bcm2836_control_write: Bad offset 8 [ 0.000000] arch_timer: WARNING: Invalid trigger for IRQ2, assuming level low [ 0.000000] arch_timer: WARNING: Please fix your firmware [ 0.000000] arch_timer: cp15 timer(s) running at 62.50MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns [ 0.001154] sched_clock: 56 bits at 62MHz, resolution 16ns, wraps every 4398046511096ns [ 0.068563] Console: colour dummy device 80x25 [ 0.081268] Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=250000) [ 0.083225] pid_max: default: 32768 minimum: 301 [ 0.094763] Security Framework initialized [ 0.096254] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.113385] AppArmor: AppArmor initialized [ 0.127602] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.135573] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.137705] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) [ 0.138861] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes) [ 0.369415] ASID allocator initialised with 65536 entries [ 0.376083] Hierarchical SRCU implementation. [ 0.437838] EFI services will not be available. [ 0.462860] smp: Bringing up secondary CPUs ... [ 0.487588] Detected VIPT I-cache on CPU1 [ 0.490893] arch_timer: WARNING: Invalid trigger for IRQ2, assuming level low [ 0.490944] arch_timer: WARNING: Please fix your firmware [ 0.491388] CPU1: Booted secondary processor [410fd034] [ 0.546624] Detected VIPT I-cache on CPU2 [ 0.547535] arch_timer: WARNING: Invalid trigger for IRQ2, assuming level low [ 0.547632] arch_timer: WARNING: Please fix your firmware [ 0.548032] CPU2: Booted secondary processor [410fd034] [ 0.574539] Detected VIPT I-cache on CPU3 [ 0.575101] arch_timer: WARNING: Invalid trigger for IRQ2, assuming level low [ 0.575150] arch_timer: WARNING: Please fix your firmware [ 0.575367] CPU3: Booted secondary processor [410fd034] [ 0.578684] smp: Brought up 1 node, 4 CPUs [ 0.584515] SMP: Total of 4 processors activated. [ 0.585656] CPU features: detected feature: 32-bit EL0 Support [ 0.603653] CPU: All CPU(s) started at EL2 [ 0.607831] alternatives: patching kernel code [ 0.695440] devtmpfs: initialized [ 0.806025] Registered cp15_barrier emulation handler [ 0.806837] Registered setend emulation handler [ 0.816246] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.818294] futex hash table entries: 1024 (order: 5, 131072 bytes) [ 0.864640] pinctrl core: initialized pinctrl subsystem [ 0.929209] DMI not present or invalid. [ 0.955714] NET: Registered protocol family 16 [ 1.063727] cpuidle: using governor ladder [ 1.068747] cpuidle: using governor menu [ 1.079439] vdso: 2 pages (1 code @ ffff000008896000, 1 data @ ffff000008fa5000) [ 1.081031] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 1.127784] DMA: preallocated 256 KiB pool for atomic allocations [ 1.137470] Serial: AMBA PL011 UART driver [ 1.195277] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_gpio32, deferring probe [ 1.398312] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 1.436505] ACPI: Interpreter disabled. [ 1.461028] vgaarb: loaded [ 1.473307] EDAC MC: Ver: 3.0.0 [ 1.481644] dmi: Firmware registration failed. [ 1.543428] clocksource: Switched to clocksource arch_sys_counter [ 2.815434] VFS: Disk quotas dquot_6.6.0 [ 2.817156] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.850332] AppArmor: AppArmor Filesystem Enabled [ 2.854670] pnp: PnP ACPI: disabled [ 3.035675] NET: Registered protocol family 2 [ 3.071712] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 3.073599] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) [ 3.075011] TCP: Hash tables configured (established 8192 bind 8192) [ 3.082515] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 3.083954] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 3.094971] NET: Registered protocol family 1 [ 3.123313] Unpacking initramfs...
Here it hangs, even with CPRMAN patch from Guenter:
https://lists.gnu.org/archive/html/qemu-devel/2018-07/msg03153.html
Regards,
Phil.
Philippe Mathieu-Daudé (2):
hw/char/serial: Add a helper to set the divisor register hw/char/bcm2835_aux: Provide full 16550 UART support
hw/arm/bcm2835_peripherals.c | 2 - hw/char/bcm2835_aux.c | 211 +++------------------------------- hw/char/serial.c | 6 + include/hw/char/bcm2835_aux.h | 7 +- include/hw/char/serial.h | 1 + 5 files changed, 27 insertions(+), 200 deletions(-)
Signature · 1 line
2.20.1
PATCH 1/2 hw/char/serial: Add a helper to set the divisor register
Some chipsets provide 16650 compatible UART with exhanced features. The BCM2835 provides a register to directly set the baudrate divisor register without having to use the LABD bit.
Add a helper to allow models to directly set the divisor.
--- hw/char/serial.c | 6 ++++++ include/hw/char/serial.h | 1 + 2 files changed, 7 insertions(+)
hw/char/serial.c +6 -0
@@ -191,6 +191,12 @@ static void serial_update_parameters(SerialState *s) speed, parity, data_bits, stop_bits); } +void serial_set_divider (SerialState *s,uint16_t divider) +{ + s->divider = divider; +serial_update_parameters (s); +} +static void serial_update_msl (SerialState *s) {uint8_t omsr;
include/hw/char/serial.h +1 -0
@@ -83,6 +83,7 @@ extern const MemoryRegionOps serial_io_ops;void serial_realize_core (SerialState *s,Error **errp);void serial_exit_core (SerialState *s);void serial_set_frequency (SerialState *s,uint32_t frequency); +void serial_set_divider (SerialState *s,uint16_t divider);/* legacy pre qom */ SerialState *serial_init(int base, qemu_irq irq, int baudbase,
Signature · 1 line
2.20.1
RFC PATCH 2/2 hw/char/bcm2835_aux: Provide full 16550 UART support
In reply to Philippe Mathieu-DaudéFrom: Philippe Mathieu-Daudé <[email protected]>
The BCM2835 AUX UART is compatible with the 16650 model. Since a such model is already available and tested, reuse it.
TODO:
- The serial model hardcodes a 16B FIFO (16550A) while this model is a 8B FIFO
- Various 16550A register bits are not implemented, thus require to be properly masked
- How to keep migration working?
- How to use a chardev property?
--- hw/arm/bcm2835_peripherals.c | 2 - hw/char/bcm2835_aux.c | 211 +++------------------------------- include/hw/char/bcm2835_aux.h | 7 +- 3 files changed, 20 insertions(+), 200 deletions(-)
hw/arm/bcm2835_peripherals.c +0 -2
@@ -167,8 +167,6 @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp)qdev_get_gpio_in_named (DEVICE (&s->ic),BCM2835_IC_GPU_IRQ , INTERRUPT_UART));/* AUX / UART1 */ -qdev_prop_set_chr (DEVICE (&s->aux),"chardev" ,serial_hd (1 )); -object_property_set_bool (OBJECT (&s->aux), true,"realized" , &err);if (err) {error_propagate (errp, err);
hw/char/bcm2835_aux.c +18 -193
299 lines not on this page · raw message
include/hw/char/bcm2835_aux.h +2 -5
@@ -9,6 +9,7 @@#define BCM2835_AUX_H #include "hw/sysbus.h" +#include "hw/char/serial.h" #include "chardev/char-fe.h" #define TYPE_BCM2835_AUX "bcm2835-aux"
@@ -22,12 +23,8 @@ typedef struct {/*< public >*/ MemoryRegion iomem; -CharBackend chr;qemu_irq irq; - -uint8_t read_fifo[BCM2835_AUX_RX_FIFO_LEN ]; -uint8_t read_pos, read_count; - uint8_t ier, iir; + SerialState *serial; } BCM2835AuxState;#endif
Signature · 1 line
2.20.1
Quoted 16 lines · Philippe Mathieu-Daudé
Hi,
Since there has been some activity on the list asking about Rasberry PI USB support, I had a look a some previous unfinished work and rebased it to share, in case it helps hobbyist interested in improving these machines.
This series is some proof-of-concept on improving the AUX UART support. See the commit description for various TODO/questions.
This can be tested using files documented by Peter Maydell in his blog post:
https://translatedcode.wordpress.com/2018/04/25/debian-on-qemus-raspberry-pi-3-model/And using the kernel command line arguments suggested by Guenter Roeck:
Quoted 8 lines
qemu-system-aarch64 -M raspi3 -m 1024 \
-kernel raspi3/bootpart/vmlinuz-4.14.0-3-arm64 \
-initrd raspi3/bootpart/initrd.img-4.14.0-3-arm64 \
-dtb raspi3/bootpart/bcm2837-rpi-3-b.dtb \
-append 'earlycon=uart8250,mmio32,0x3f215040 rdinit=/sbin/init panic=-1 console=ttyS1,115200' \
-drive file=raspi3/2018-01-08-raspberry-pi-3-buster-PREVIEW.img,format=raw,if=sd \
-serial null -serial stdio \
-d unimp,guest_errors -trace bcm283\*
[...]
I forgot to add: the difference with what we have now, is all these registers get now properly implemented:
bcm2836_control_write: Bad offset 0bcm2836_control_write: Bad offset 8bcm2835_aux_write: AUX_MU_MCR_REG unsupportedbcm2835_aux_write: AUX_MU_LCR_REG unsupportedbcm2835_aux_write: AUX_MU_LCR_REG unsupportedbcm2835_aux_write: AUX_MU_MCR_REG unsupportedbcm2835_property: unhandled tag 00030030bcm2835_aux_read: AUX_MU_MSR_REG unsupportedbcm2835_aux_read: AUX_MU_LCR_REG unsupportedbcm2835_aux_read: AUX_MU_LCR_REG unsupportedbcm2835_aux_write: AUX_MU_LCR_REG unsupportedbcm2835_aux_write: AUX_MU_MCR_REG unsupportedbcm2835_aux_read: AUX_MU_MSR_REG unsupportedbcm2835_aux_write: AUX_MU_LCR_REG unsupportedbcm2835_aux_write: AUX_MU_LCR_REG unsupportedbcm2835_aux_write: AUX_MU_MCR_REG unsupportedbcm2835_aux_write: AUX_MU_MCR_REG unsupportedbcm2835_aux_read: AUX_MU_MSR_REG unsupportedbcm2835_aux_read: AUX_MU_MSR_REG unsupportedbcm2835_aux_read: AUX_MU_MSR_REG unsupportedbcm2835_aux_read: AUX_MU_MSR_REG unsupportedbcm2835_aux_read: AUX_MU_MSR_REG unsupportedbcm2835_aux_read: AUX_MU_MSR_REG unsupportedbcm2835_aux_read: AUX_MU_MSR_REG unsupportedbcm2835_aux_read: AUX_MU_MSR_REG unsupportedbcm2835_aux_read: AUX_MU_MSR_REG unsupportedbcm2835_aux_read: AUX_MU_MSR_REG unsupportedbcm2835_aux_read: AUX_MU_MSR_REG unsupportedbcm2835_aux_read: AUX_MU_MSR_REG unsupportedbcm2835_aux_read: AUX_MU_MSR_REG unsupportedbcm2835_aux_read: AUX_MU_MSR_REG unsupported
(log booting the same image without this series).
Quoted 24 lines · Philippe Mathieu-Daudé
Hi,
Since there has been some activity on the list asking about Rasberry PI USB support, I had a look a some previous unfinished work and rebased it to share, in case it helps hobbyist interested in improving these machines.
This series is some proof-of-concept on improving the AUX UART support. See the commit description for various TODO/questions.
This can be tested using files documented by Peter Maydell in his blog post:
https://translatedcode.wordpress.com/2018/04/25/debian-on-qemus-raspberry-pi-3-model/And using the kernel command line arguments suggested by Guenter Roeck:
qemu-system-aarch64 -M raspi3 -m 1024 \ -kernel raspi3/bootpart/vmlinuz-4.14.0-3-arm64 \ -initrd raspi3/bootpart/initrd.img-4.14.0-3-arm64 \ -dtb raspi3/bootpart/bcm2837-rpi-3-b.dtb \ -append 'earlycon=uart8250,mmio32,0x3f215040 rdinit=/sbin/init panic=-1 console=ttyS1,115200' \ -drive file=raspi3/2018-01-08-raspberry-pi-3-buster-PREVIEW.img,format=raw,if=sd \ -serial null -serial stdio \ -d unimp,guest_errors -trace bcm283\*
[ ... ]
Quoted 5 lines
[ 3.123313] Unpacking initramfs...Here it hangs, even with CPRMAN patch from Guenter:
https://lists.gnu.org/archive/html/qemu-devel/2018-07/msg03153.html
This command line works for me:
qemu-system-aarch64 -M raspi3 -kernel arch/arm64/boot/Image -no-reboot \ -nographic -snapshot -smp 4 -m 1G \ -drive file=rootfs.ext2,format=raw,if=sd \ -serial null -serial stdio -monitor none -no-reboot \ --append 'panic=-1 slub_debug=FZPUA root=/dev/mmcblk0 rootwait earlycon=uart8250,mmio32,0x3f215040 console=ttyS1,115200' \ -dtb arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dtb
or, with initrd:
qemu-system-aarch64 -M raspi3 -kernel arch/arm64/boot/Image -no-reboot \ -nographic \ -initrd rootfs.cpio \ -m 1G -serial null -serial stdio -monitor none -no-reboot \ --append 'panic=-1 slub_debug=FZPUA rdinit=/sbin/init earlycon=uart8250,mmio32,0x3f215040 console=ttyS1,115200' \ -dtb arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dtb
This is with the mainline kernel.
I don't see a significant difference to your patch series.
I tested with qemu 4.0, 4.1, and mainline (with my patch series applied on top of each). One problem I do see is that booting mainline (as of right now) is _slow_ compared to released versions of qemu. It takes some 35 seconds to get to "Unpacking initramfs", compared to ~8 seconds for v4.1 and earlier. Otherwise it works.
One possibility might be that your initrd has a problem. Can you boot without your patch series, or is it always stuck ?
Thanks,
Guenter
Quoted 4 lines · Guenter Roeck
I tested with qemu 4.0, 4.1, and mainline (with my patch series applied on top of each). One problem I do see is that booting mainline (as of right now) is _slow_ compared to released versions of qemu. It takes some 35 seconds to get to "Unpacking initramfs", compared to ~8 seconds for v4.1 and earlier. Otherwise it works.
Hmm, slow compared to v4.1.0 ? That's not so long in the past so that seems worth trying to bisect to find the culprit...
thanks
-- PMM
Quoted 9 lines · Peter Maydell
Quoted 4 lines · Guenter Roeck
I tested with qemu 4.0, 4.1, and mainline (with my patch series applied on top of each). One problem I do see is that booting mainline (as of right now) is _slow_ compared to released versions of qemu. It takes some 35 seconds to get to "Unpacking initramfs", compared to ~8 seconds for v4.1 and earlier. Otherwise it works.
Hmm, slow compared to v4.1.0 ? That's not so long in the past so that seems worth trying to bisect to find the culprit...
Yes, I know. I put it on my task list.
Guenter
Quoted 9 lines · Peter Maydell
Quoted 4 lines · Guenter Roeck
I tested with qemu 4.0, 4.1, and mainline (with my patch series applied on top of each). One problem I do see is that booting mainline (as of right now) is _slow_ compared to released versions of qemu. It takes some 35 seconds to get to "Unpacking initramfs", compared to ~8 seconds for v4.1 and earlier. Otherwise it works.
Hmm, slow compared to v4.1.0 ? That's not so long in the past so that seems worth trying to bisect to find the culprit...
Turns out it was the "usual" problem: "--enable-debug" specified as configuration option. Sorry for the noise.
Guenter
Quoted 58 lines · Guenter Roeck
Quoted 28 lines · Philippe Mathieu-Daudé
Hi,
Since there has been some activity on the list asking about Rasberry PI USB support, I had a look a some previous unfinished work and rebased it to share, in case it helps hobbyist interested in improving these machines.
This series is some proof-of-concept on improving the AUX UART support. See the commit description for various TODO/questions.
This can be tested using files documented by Peter Maydell in his blog post:
https://translatedcode.wordpress.com/2018/04/25/debian-on-qemus-raspberry-pi-3-model/And using the kernel command line arguments suggested by Guenter Roeck:
qemu-system-aarch64 -M raspi3 -m 1024 \
-kernel raspi3/bootpart/vmlinuz-4.14.0-3-arm64 \
-initrd raspi3/bootpart/initrd.img-4.14.0-3-arm64 \
-dtb raspi3/bootpart/bcm2837-rpi-3-b.dtb \
-append 'earlycon=uart8250,mmio32,0x3f215040 rdinit=/sbin/init panic=-1 console=ttyS1,115200' \
-drive file=raspi3/2018-01-08-raspberry-pi-3-buster-PREVIEW.img,format=raw,if=sd \
-serial null -serial stdio \
-d unimp,guest_errors -trace bcm283\*[ ... ]
Quoted 5 lines
[ 3.123313] Unpacking initramfs...
Here it hangs, even with CPRMAN patch from Guenter:
https://lists.gnu.org/archive/html/qemu-devel/2018-07/msg03153.htmlThis command line works for me:
qemu-system-aarch64 -M raspi3 -kernel
arch/arm64/boot/Image-no-reboot \
-nographic -snapshot -smp 4 -m 1G \
-drive file=rootfs.ext2,format=raw,if=sd \
-serial null -serial stdio -monitor none -no-reboot \
--append 'panic=-1 slub_debug=FZPUA root=/dev/mmcblk0 rootwait earlycon=uart8250,mmio32,0x3f215040 console=ttyS1,115200' \
-dtbarch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dtbor, with initrd:
qemu-system-aarch64 -M raspi3 -kernel
arch/arm64/boot/Image-no-reboot \
-nographic \
-initrd rootfs.cpio \
-m 1G -serial null -serial stdio -monitor none -no-reboot \
--append 'panic=-1 slub_debug=FZPUA rdinit=/sbin/init earlycon=uart8250,mmio32,0x3f215040 console=ttyS1,115200' \
-dtbarch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dtb
Quoted 3 lines
This is with the mainline kernel.
I don't see a significant difference to your patch series.
Thank you for taking the time to test!
The biggest difference is the diffstat:
hw/char/bcm2835_aux.c | 211 +++-------------------------------
The model is now cleaner and easier to maintain.
The logical differences are noted in 2nd patch, basically:
1- not same FIFO length (easily fixable)
2- now the model implements more feature than supposed to 3- migration
I'll wait for the different ARM/Migration subsystem review.
[...]
Quoted 3 lines
One possibility might be that your initrd has a problem. Can you boot without your patch
series, or is it always stuck ?
I remember it used to work for me back when I wrote it, so it is probably an initrd problem. I'll test later and keep you updated.
Thanks!
Phil.
Quoted 59 lines · Philippe Mathieu-Daudé
Quoted 58 lines · Guenter Roeck
Quoted 28 lines · Philippe Mathieu-Daudé
Hi,
Since there has been some activity on the list asking about Rasberry PI USB support, I had a look a some previous unfinished work and rebased it to share, in case it helps hobbyist interested in improving these machines.
This series is some proof-of-concept on improving the AUX UART support. See the commit description for various TODO/questions.
This can be tested using files documented by Peter Maydell in his blog post:
https://translatedcode.wordpress.com/2018/04/25/debian-on-qemus-raspberry-pi-3-model/And using the kernel command line arguments suggested by Guenter Roeck:
qemu-system-aarch64 -M raspi3 -m 1024 \
-kernel raspi3/bootpart/vmlinuz-4.14.0-3-arm64 \
-initrd raspi3/bootpart/initrd.img-4.14.0-3-arm64 \
-dtb raspi3/bootpart/bcm2837-rpi-3-b.dtb \
-append 'earlycon=uart8250,mmio32,0x3f215040 rdinit=/sbin/init
panic=-1 console=ttyS1,115200' \
-drive
file=raspi3/2018-01-08-raspberry-pi-3-buster-PREVIEW.img,format=raw,if=sd \
-serial null -serial stdio \
-d unimp,guest_errors -trace bcm283\*[ ... ]
Quoted 5 lines
[ 3.123313] Unpacking initramfs...
Here it hangs, even with CPRMAN patch from Guenter:
https://lists.gnu.org/archive/html/qemu-devel/2018-07/msg03153.htmlThis command line works for me:
qemu-system-aarch64 -M raspi3 -kernel
arch/arm64/boot/Image-no-reboot \
-nographic -snapshot -smp 4 -m 1G \
-drive file=rootfs.ext2,format=raw,if=sd \
-serial null -serial stdio -monitor none -no-reboot \
--append 'panic=-1 slub_debug=FZPUA root=/dev/mmcblk0 rootwait
earlycon=uart8250,mmio32,0x3f215040 console=ttyS1,115200' \
-dtbarch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dtbor, with initrd:
qemu-system-aarch64 -M raspi3 -kernel
arch/arm64/boot/Image-no-reboot \
-nographic \
-initrd rootfs.cpio \
-m 1G -serial null -serial stdio -monitor none -no-reboot \
--append 'panic=-1 slub_debug=FZPUA rdinit=/sbin/init
earlycon=uart8250,mmio32,0x3f215040 console=ttyS1,115200' \
-dtbarch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dtb
Quoted 4 lines
Quoted 3 lines
This is with the mainline kernel.
I don't see a significant difference to your patch series.
Sorry, I meant ".. difference to the command line you used to test your patch series".
Quoted 15 lines
Thank you for taking the time to test!
The biggest difference is the diffstat:
hw/char/bcm2835_aux.c | 211 +++-------------------------------The model is now cleaner and easier to maintain.
The logical differences are noted in 2nd patch, basically:
1- not same FIFO length (easily fixable)
2- now the model implements more feature than supposed to 3- migrationI'll wait for the different ARM/Migration subsystem review.
Quoted 8 lines
[...]
Quoted 3 lines
One possibility might be that your initrd has a problem. Can you boot without your patch
series, or is it always stuck ?I remember it used to work for me back when I wrote it, so it is probably an initrd problem. I'll test later and keep you updated.
You could give it a try with the images I use:
https://github.com/groeck/linux-build-test/tree/master/rootfs/arm64
Only caveat is that you'd have to specify "noreboot" as command line option if you don't want the system to reboot immediately.
Guenter
Quoted 7 lines · Philippe Mathieu-Daudé
Since there has been some activity on the list asking about Rasberry PI USB support, I had a look a some previous unfinished work and rebased it to share, in case it helps hobbyist interested in improving these machines.
This series is some proof-of-concept on improving the AUX UART support. See the commit description for various TODO/questions.
Apologies for not having got round to looking at this RFC patchset sooner...
I think my question here would be -- is using the 16650 emulation really the right thing? The BCM2835 documentation says "The implemented UART is *not* a 16650 compatible UART. However as far as possible the first 8 control and status registers are laid out *like* a 16550 UART." That suggests to me that it would be better to just improve our model of this hardware rather than to replace it with a 16550 model which isn't what the hardware really is.
thanks
-- PMM
Hi Peter,
Quoted 11 lines · Peter Maydell
Quoted 7 lines · Philippe Mathieu-Daudé
Since there has been some activity on the list asking about Rasberry PI USB support, I had a look a some previous unfinished work and rebased it to share, in case it helps hobbyist interested in improving these machines.
This series is some proof-of-concept on improving the AUX UART support. See the commit description for various TODO/questions.
Apologies for not having got round to looking at this RFC patchset sooner...
No worry, this patch is not very important.
Quoted 8 lines
I think my question here would be -- is using the 16650 emulation really the right thing? The BCM2835 documentation says "The implemented UART is *not* a 16650 compatible UART. However as far as possible the first 8 control and status registers are laid out *like* a 16550 UART." That suggests to me that it would be better to just improve our model of this hardware rather than to replace it with a 16550 model which isn't what the hardware really is.
Some registers are the same as the 16550, some others only implement bits (identically placed). None provide extra bit (a new bit not present in the 16550, for that they used new registers).
My idea was to reduce/reuse the chardev code.
I think a correct way is using the "hw/register.h" API to mask the unimplemented bits.
This patch reduces a lot of [LCR/LSR/MCR/MSR] "register unimplemented" when booting Linux, but from the emulation point of view they are harmless, so we can ignore this patch for now.
Thanks,
Phil.